Construction of label-free electrochemical immunosensor on mesoporous carbon nanospheres for breast cancer susceptibility gene

Nanotechnology‐based electrochemical biosensors for monitoring breast cancer biomarkers

Breast cancer is categorized as the most widespread cancer type among women globally. On-time diagnosis can decrease the mortality rate by making the right decision in the therapy procedure. These features lead to a reduction in medication time and socioeconomic burden. The current review article provides a comprehensive assessment for breast cancer diagnosis using nanomaterials and related technologies. Growing use of the nano/biotechnology domain in terms of electrochemical nanobiosensor designing was discussed in detail. In this regard, recent advances in nanomaterial applied for amplified biosensing methodologies were assessed for breast cancer diagnosis by focusing on the advantages and disadvantages of these approaches. We also monitored designing methods, advantages, and the necessity of suitable (nano) materials from a statistical standpoint. The main objective of this review is to classify the applicable biosensors based on breast cancer biomarkers. With numerous nano-sized platforms published for breast cancer diagnosis, this review tried to collect the most suitable methodologies for detecting biomarkers and certain breast cancer cell types.

Fluorometric determination of the breast cancer 1 gene based on the target-induced conformational change of a DNA template for copper nanoclusters

The breast cancer 1 (BRCA1) gene is a tumor suppressor gene, whose mutation is closely related to breast cancer. Therefore, the sensitive detection of the BRCA1 gene is extremely important for human health, particularly for women. In this study, a label-free fluorescent method based on hairpin DNA-templated copper nanoclusters (CuNCs) was for the first time developed for the detection of the BRCA1 gene. In the absence of target DNA, the detection system showed a strong red emission and produced a high emission peak. However, in the presence of the BRCA1 gene, the DNA probe hybridized with the BRCA1 gene and conformation of the DNA probe changed. As a result, the amount of produced CuNCs decreased and a low emission peak was obtained. The fluorescence intensity of the detection system was linearly correlated with the concentration of the BRCA1 gene ranging from 2 nM to 600 nM. The detectable limit was 2 nM for the BRCA1 gene assay, which was comparable with those reported by other non-amplifying sensors. Moreover, the developed method showed satisfactory recoveries for the BRCA1 gene assay in the bovine serum. The DNA-templated CuNC-based fluorescent assay thus offered a promising platform for the diagnosis of a breast cancer biomarker.

Facile synthesis of polyaniline-polythionine redox hydrogel: Conductive, antifouling and enzyme-linked material for ultrasensitive label-free amperometric immunosensor toward carcinoma antigen-125

Sensitivity enhancement and proteins adsorption are the common challenges faced in protein immunoassays. In this work, an ultrasensitive and protein-resistant label-free amperometric immunosening platform for carcinoma antigen-125 (CA125) based on redox polyaniline-polythionine hydrogel (PANI-PThi gel) was developed. The as-prepared hydrogel, which was facilely synthesized by electropolymerization, exhibited good conductivity and strong hydrophilicity while the sensitivity and specificity of the immunosensor can be enhanced. Furthermore, the as-prepared AuNPs functionalized PANI-PThi gel exhibited strong current signal and H₂O₂ electrocatalytic ability, which guaranteed a large current variable range. Based on these, the prepared immunosensor revealed a wide linear range from 0.0001 U mL^-1 to 1 kU mL^-1, a limit of detection of 0.00125 U mL^-1 and its sensitivity was at least three-fold higher than previous works. More importantly, the prepared immunosensor exhibited excellent specificity, making it capable of assaying CA125 in human serum.

Ultrasensitive electrochemical detection of Dicer1 3'UTR for the fast analysis of alternative cleavage and polyadenylation

Alternative cleavage and polyadenylation (APA) is involved in several important biological processes in animals, e.g. cell growth and development, and cancer progression. The increasing data show that cancer cells are inclined to produce mRNA isoforms with a shortened 3'UTR undergoing APA. For example, the Dicer1 isoform with a shorter 3'untranslated region (3'UTR) was found to be overexpressed in some cancer cells, which may be used as a potential novel prognostic biomarker for cancer. In the present work, a novel electrochemical biosensor for ultrasensitive determination of Dicer1 was designed by using gold nanoparticles and p-sulfonated calix[6]arene functionalized reduced graphene oxide (Au@SCX6-rGO) as nanocarriers. The results showed that the expressions of the shorter 3'UTR (Dicer1-S) both in BT474 and SKBR3 were obviously higher than those of the longer Dicer1 (Dicer1-L) by the constructed biosensor, which agreed well with the result analyzed by the RT-qPCR method. The detection ranges of Dicer1-S and Dicer1-L were 10^-14-10^-9 M and 10^-15-10^-10 M. The LODs were 3.5 and 0.53 fM. The specificity of the proposed biosensor was also very high. For the first time, the expressional analysis of different 3'UTRs caused by APA was studied by an electrochemical method. Moreover, the use of a macrocyclic host for constructing an electrochemical/biosensing platform has rarely been reported. The proposed electrochemical sensing strategy is thus expected to provide a new method for determination of novel biomarkers and a novel method for fast and cheap analysis of APA.

PEGylated Polyaniline Nanofibers: Antifouling and Conducting Biomaterial for Electrochemical DNA Sensing

Biofouling arising from nonspecific adsorption is a substantial outstanding challenge in diagnostics and disease monitoring, and antifouling sensing interfaces capable of reducing the nonspecific adsorption of proteins from biological complex samples are highly desirable. We present herein the preparation of novel composite nanofibers through the grafting of polyethylene glycol (PEG) polymer onto polyaniline (PANI) nanofibers and their application in the development of antifouling electrochemical biosensors. The PEGylated PANI (PANI/PEG) nanofibers possessed large surface area and remained conductive and at the same time demonstrated excellent antifouling performances in single protein solutions as well as complex human serum samples. Sensitive and low fouling electrochemical biosensors for the breast cancer susceptibility gene (BRCA1) can be easily fabricated through the attachment of DNA probes to the PANI/PEG nanofibers. The biosensor showed a very high sensitivity to target BRCA1 with a linear range from 0.01 pM to 1 nM and was also efficient enough to detect DNA mismatches with satisfactory selectivity. Moreover, the DNA biosensor based on the PEGylated PANI nanofibers supported the quantification of BRCA1 in complex human serum, indicating great potential of this novel biomaterial for application in biosensors and bioelectronics.

Biosensors for breast cancer diagnosis: A review of bioreceptors, biotransducers and signal amplification strategies

Breast cancer is highly prevalent in females and accounts for second highest number of deaths, worldwide. Cumbersome, expensive and time consuming detection techniques presently available for detection of breast cancer potentiates the need for development of novel, specific and ultrasensitive devices. Biosensors are the promising and selective detection devices which hold immense potential as point of care (POC) tools. Present review comprehensively scrutinizes various breast cancer biosensors developed so far and their technical evaluation with respect to efficiency and potency of selected bioreceptors and biotransducers. Use of glycoproteins, DNA biomarkers, micro-RNA, circulatory tumor cells (CTC) and some potential biomarkers are introduced briefly. The review also discusses various strategies used in signal amplification such as nanomaterials, redox mediators, p19 protein, duplex specific nucleases (DSN) and redox cycling.

Electrochemical Detection Using Ionic Liquids

Ionic liquids are relatively new additions to the field of electrochemical sensing. Despite that, they have had a significant impact, and several major areas are covered herein. This includes the application of ionic liquids in the quantification of heavy metals, explosives, and chemical warfare agents, and in biosensors and bioanalysis. Also highlighted are the significant advantages ionic liquids inherently have with regards to gas sensors and carbon paste electrodes, by virtue of their non-volatility, inherent conductivity, and diversity of structure and function. Finally, their incorporation with carbon nanomaterials to form various gels, pastes, films, and printed electrodes is also highlighted.

Immunosensor for prostate-specific antigen using Au/Pd@flower-like SnO2 as platform and Au@mesoporous carbon as signal amplification

The illustration for the constructed electrochemical immunosensor and the signal amplification strategy.

A label-free electrochemical immunosensor with a novel signal production and amplification strategy based on three-dimensional pine-like Au–Cu nanodendrites

A simple and novel label-free electrochemical immunosensor based on a bimetallic alloy was fabricated in this work.

Porous platinum nanotubes modified with dendrimers as nanocarriers and electrocatalysts for sensitive electrochemical aptasensors based on enzymatic signal amplification

A highly sensitive electrochemical aptasensor for thrombin detection is developed and demonstrated by using porous platinum nanotubes modified with polyamidoamine dendrimers as nanocarriers and electrocatalysts. The proposed strategy affords a low detection limit of 0.03 pM based on enzyme-based signal amplification.

Electrochemical immunosensor based on hydrophilic polydopamine-coated prussian blue-mesoporous carbon for the rapid screening of 3-bromobiphenyl

A sensitive electrochemical immunosensor for 3-bromobiphenyl (3-BBP) detection was constructed by employing a new polydopamine coated prussian blue-mesoporous carbon (PDOP/PB/CMK-3) nanocomposite as the substrate platform and multi-horseradish peroxidase-double helix carbon nanotubes-secondary antibody (multi-HRP-DHCNTs-Ab2) as the signal label. PB/CMK-3 was firstly successfully in-situ synthesized with the aid of the CMK-3 reduction, which was characterized by transmission electron microscope (TEM), infrared spectroscopy (IR), X-ray diffraction (XRD) and N2 adsorption-desorption analysis. By using PDOP/PB/CMK-3 as the substrate, it can effectively enhance the specific surface for antigen loading due to the three-dimensional structure of the nanocomposites, while large amount of PB that fixed inside or outside the pore of CMK-3 successfully improved the electrochemical response and the PDOP film can provide a biocompatible environment to maintain the activity of antigen availability. Under the optimized conditions, the proposed immunosensor shows a good current response to 3-BBP in a linear range from 5 pM to 2 nM with a detection limit of 2.25 pM. In addition, the specificity, reproducibility and stability of the immunosensor were also proved to be acceptable, indicating its potential application in environmental monitoring.

Designing label-free electrochemical immunosensors for cytochrome c using nanocomposites functionalized screen printed electrodes

We have designed here a label-free direct electrochemical immunosensor for the detection of cytochrome c (cyt c), a heme containing metalloprotein using its specific monoclonal antibody. Two nanocomposite-based electrochemical immunosensor platforms were evaluated for the detection of cyt c; (i) self-assembled monolayer (SAM) on gold nanoparticles (GNP) in polypyrrole (PPy) grafted screen printed electrodes (SPE) and (ii) carbon nanotubes (CNT) integrated PPy/SPE. The nanotopologies of the modified electrodes were confirmed by scanning electron microscopy. Electrochemical impedance spectroscopy and cyclic voltammetry were employed to monitor the stepwise fabrication of the nanocomposite immunosensor platforms. In the present method, the label-free quantification of cyt c is based on the direct electron transfer between Fe (III)/Fe (II)-heme redox active site of cyt c selectively bound to anti-cyt c nanocomposite modified SPE. GNP/PPy and CNT/PPy nanocomposites promoted the electron transportation through the conductive pore channels. The overall analytical performance of GNP/PPy based immunosensor (detection limit 2 nM; linear range: 2 nM to 150 µM) was better than the anti-cyt c/CNT/PPy (detection limit 10 nM; linear range: 10 nM to 50 µM). Further, the measurement of cyt c release in cell lysates of cardiomyocytes using the GNP/PPy based immunosensor gave an excellent correlation with standard ELISA.