Electrical field-induced extraction and separation techniques: promising trends in analytical chemistry--a review

Nanoplastic Sample Cleanup by Micro-Electromembrane Extraction across Free Liquid Membranes

Sample preparation techniques enabling the separation and cleanup of nanoplastics removing other components present in complex sample matrices are scarce. Herein, micro-electromembrane extraction (μ-EME) has been explored for this purpose based on the extraction of nanoplastic particles across a free liquid membrane (FLM). The extraction unit is based on a perfluoroalkoxy tube sequentially filled with the acceptor solution (20 μL 5 mM phosphate buffer, pH 10.7), FLM (10 μL 1-pentanol), and donor solution (20 μL sample/standard solution). Sulfonated polystyrene beads (200 nm particle size) were selected as a model mimicking negatively charged nanoplastics. At 700 V, nanoplastics transferred from the donor solution into the FLM before moving across the FLM into the acceptor solution. Quantitative nanoplastic measurements after μ-EME were performed by injecting the acceptor solution into a capillary electrophoresis system with diode array detection. μ-EME allowed the rapid nanoplastic sample cleanup, requiring an extraction time of just 90 s and obtaining a nanoplastic transfer yield through the FLM of 60% with RSD values below 9%. The μ-EME technique enabled the efficient sample matrix cleanup of nanoplastics spiked in different tea matrices. Nanoplastic transfer yield through the FLM for black tea and flavored tea matrices were 56% and 47%, respectively, with complete sample matrix removal of UV-absorbing compounds.

An efficient microchip electromembrane extraction online with high-performance liquid chromatography for the measurement of nicotine in high consumption vegetables

INTRODUCTION

Nicotine, a highly addictive substance, is naturally produced in the Solanaceae family of plants, particularly tobacco. The presence of nicotine in plant foods has adverse effects on the lungs, kidneys, heart, and reproductive system.

OBJECTIVE

A novel three-phase microchip flat electromembrane coupled with online high-performance liquid chromatography (HPLC) was developed to analyze nicotine in tomato, mushroom, eggplant, bell pepper, and red pepper.

METHODS

The microchip was connected to the HPLC in online mode. All effective variables were optimized to achieve the best extraction response. The use of electric potential and 2-nitrophenyl octyl ether -5% di(2-ethylhexyl) phosphate as a modified supported liquid membrane (SLM) increased the sensitivity and selectivity.

RESULTS

The optimal extraction voltage, extraction time, and ion balance were 40 V, 10 min and 0, respectively. The dynamic linear range was 0.5-1000 ng g-1. The obtained recovery, relative standard deviation, and enrichment factor were 98%, 7%, and 35, respectively. The limits of detection 0.4 ng g-1 and the limits of quantification were obtained 1.3 ng g-1. The highest (105.0 ng g-1) and lowest (3.4 ng g-1) concentrations of nicotine were obtained for eggplant and tomato, respectively.

CONCLUSION

Selective electromembrane extraction of nicotine from the donor phase to the acceptor phase was performed by optimizing the main variables influencing the method mechanism. The new channel design in this analytical system and online injection increased efficiency, stability, and repeatability. The results revealed that this method is capable for the efficient determination of trace amount of nicotine in edible vegetables.

Aqueous preparation of arginyl-fructosyl-glucose (a maltose-arginine AC) and determination of Amadori compounds (ACs) in red ginseng by ultra-high performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS)

Amadori compounds (ACs) are key Maillard intermediates in various foods after thermal processing, and are also important non-saponin components in red ginseng. Currently, due to the difficulty in obtaining AC standards, the determination of multiple ACs is limited and far from optimal. In this study, an ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method was developed and validated. A green synthetic method was developed for arginyl-fructosyl-glucose (AFG), the major AC in red ginseng with potential health benefits. The UPLC-MS/MS method was then applied in identification and quantification of ACs in red ginseng samples, which showed for the first time that 12 other ACs also exist in red ginseng in addition to AFG and arginyl-fructose (total 98.88 % of all ACs). Contents of AFG and arginyl-fructose in whole red ginseng were 36.23 and 10.80 mg/g dry weight, respectively. Raw ginseng can be steamed and then dried whole to obtain whole red ginseng, or sliced before drying to obtain sliced red ginseng. Slicing before drying was found to reduce ACs content. Results of the present study will help to reveal the biological functions of red ginseng and related products associated with ACs and promote the standardization of red ginseng manufacture.

Electroextraction of methylene blue from aqueous environmental samples using paper points coupled with hollow fiber membranes

This article introduces a novel approach by coupling paper points with hollow fiber membrane for electroextraction (PP-HF-EE). The method was innovatively applied to extract methylene blue (MB) from large water volumes (up to 580 mL). A comprehensive study of six key parameters - organic filter, acceptor and donor phase composition, extraction time, applied voltage, and sample volume - was conducted using conventional flatbed scanning and digital image analysis. Our results revealed that extraction performance was primarily influenced by time, with low voltages (50 V) and low-conductivity organic filters (1-decanol) yielding comparable results to higher settings (300 V or 1-pentanol). Under optimized conditions (50 V, 60 min, 1-decanol as the organic filter), analytical performance parameters were assessed, demonstrating acceptable precision (RSD <18% for intra- and inter-day measurements) within a linear range of 5-100 μg L-1 (r = 0.98). PP-HF-EE demonstrated reliability through stable and reproducible electric current measurements during all extraction studies. Utilizing an extremely cost-effective detection system, PP-HF-EE achieved detection limits in the low ppb range, highlighting its potential as a promising variation of electromembrane extraction for environmental sample analysis.

Introduction of an electrospun nanofibrous membrane incorporated by metal-organic framework-199 (MOF-199) with Lewis acid property for efficient extraction of sulfonamides in on-chip electromembrane extraction

In this study, a new supporting polymeric membrane having Lewis acid nature was introduced for immobilizing organic solvent in on-chip electromembrane extraction (on-chip EME). For this aim, a polymeric nanofibrous membrane incorporated by a copper based metal-organic framework (MOF-199), with coordinatively unsaturated metal sites and Lewis acid property, was prepared by electrospinning a mixture of polycaprolactone (PCL) and MOF-199. Based on the field emission scanning electron microscopy images, the obtained polymeric membrane consisted of intertwined nanofibers having empty space between the fibers which could provide a suitable place for immobilizing the organic solvent. To demonstrate remarkable extractability of the proposed membrane (PCL/MOF-199 nanofibers) via executing Lewis acid-base interactions, three sulfonamide drugs was selected as anionic polar analytes with Lewis base feature. The parameters affecting the extraction efficiency of the method were optimized through the experimental design method using the orthogonal and rotatable central composite design (CCD). Under optimum conditions, the extraction recoveries ranging from 35.5 to 71.2 %, the relative standard deviations (RSD%) less than 6.45 %, and the detection limits in the range of 0.2-0.5 μg L-1 were achieved. The comparison of the extraction efficiency of the on-chip EME method using the electrospun PCL/MOF-199 nanofibers and PCL nanofibers membranes indicated that the proposed membrane was more efficient for extraction of sulfonamides because of the significant Lewis acid-base interactions of sulfonamides with copper uncoordinated open sites in MOF-199. Finally, the performance of the proposed method for extraction and determination of sulfonamides in three real samples was assayed.

The selective extraction of dietary polyamines from chicken breast using the application of a lab-on-a-chip electromembrane and dispersive liquid-liquid microextraction followed by gas chromatography-mass spectrometry

Excessive dietary polyamines (PAs), including putrescine (PUT), spermine (SPM), and spermidine (SPD), have become a worldwide concern due to their carcinogenicity and reduced shelf life. A modern miniaturized on-chip electromembrane extraction (EME) has been applied to extract these compounds from chicken breast samples. This method is based fundamentally on ionic compounds' electrostatic attraction, diffusion, and solubility in the acceptor phase. The chemical structure of polyamines enables their efficient extraction using an electric driving force on a microchip device. HCl solution (0.1 mol L-1) was applied as an aqueous acceptor solvent. Dispersive liquid-liquid microextraction was performed after EME to facilitate joining three-phase EME to GC-MS and improve the merit figures. The total ranges of 3.77-7.89 μg g-1, 3.48-7.02 μg g-1, and 0.78-2.20 μg g-1 were acquired as PUT, SPM and SPD concentrations in chicken breast, respectively. The results demonstrate that the level of PAs in fresh chicken breast samples is not concerning, but it may reduce the quality of chicken meat over time. This novel analytical technique has several advantages: high recovery, substantial quickness, remarkable selectivity, and good enrichment factors. This emerging method could be generalized to other studies to analyze different foodstuffs.

New and efficient direct-SLM two-phase hollow fiber electromembrane extraction coupled to GC/MS for the analysis of nitrosamines in different types of sausage: Investigation of meat type, meat percent and cooking methods

The potent two-phase hollow fiber electromembrane extraction technique coupled to gas chromatography mass spectrometry (HF-EME/GC-MS) was proposed for the determination of six types of carcinogen nitrosamines in sausages samples. Two steps of sample digestion were accomplished for the complete removal of fat globules and efficient release of target analytes. The extraction principle was based on electro-migration of target analytes via specific fiber to extraction solvent. 2-Nitrophenyl octyl ether (NPOE) was dexterously employed as both supported liquid membrane and extraction solvent, which is compatible with GC-MS. After the extraction process, the NPOE containing nitrosamines was directly injected to GC-MS without extra steps requirement to reduce analysis time. The consequences revealed that N-nitrosodiethylamine (NDEA) as the most potent carcinogen has the highest concentration in fried and oven-cooked sausages with 70% of red meat. The meat type and amount and also cooking process could significantly effect on nitrosamines formation.

Environmental Applications of Electromembrane Extraction: A Review

Electromembrane extraction (EME) is a miniaturized extraction technique that has been widely used in recent years for the analysis and removal of pollutants in the environment. It is based on electrokinetic migration across a supported liquid membrane (SLM) under the influence of an external electrical field between two aqueous compartments. Based on the features of the SLM and the electrical field, EME offers quick extraction, effective sample clean-up, and good selectivity, and limits the amount of organic solvent used per sample to a few microliters. In this paper, the basic devices (membrane materials and types of organic solvents) and influencing factors of EME are first introduced, and the applications of EME in the analysis and removal of environmental inorganic ions and organic pollutants are systematically reviewed. An outlook on the future development of EME for environmental applications is also given.

Dielectric polarization-based separations in an ionic solution

A novel non-electrophoretic, electric field-based separation mechanism capable of transporting ions based on their dielectric properties is presented here for the first time. Though this polarization-based mechanism behaves similarly to dielectrophoresis, the separation mechanism is remarkably very efficient at small length scales compared to any dielectrophoretic separation mechanism for particles. For an applied electric field of strength as low as ∼0.75 MV m^-1 across a 100 μm channel, the working solute - sodium fluorescein - is shown to decrease in its concentration by ≈20% in electric field region relative to the non electric field region. The existing macroscopic theoretical models like electrohydrodynamics and equilibrium thermodynamics are shown to underestimate the concentration change by two orders of magnitude for the same electric field strength. This surprisingly large difference between theory and experimental results suggests that the electric field-based equilibrium thermodynamic model lacks a key physics.

Multiphase electroextraction as a simple and fast sample preparation alternative for the digital image determination of doxorubicin in saliva

Monitoring chemotherapeutic drugs in biological fluids is, in many cases, extremely important for dose adjustment, the maintenance of therapies, and the control of side effects. In this work, a method for determining the doxorubicin in saliva by digital image analysis (DIA) was optimised and validated. Images from a paper point were obtained using a conventional and cheap flatbed scanner at a 600 ppp resolution. The RGB data channels were obtained from the images in a region of 15 × 15 pixels around the sorbent vertex. The paper point was used as sorbent material in sample preparation using a multiphase electroextraction system. Following optimisation using a Doehlert experimental design, the method was able to simultaneously extract 66 samples in 20 min. The high selectivity of the electric field associated with the sorption capacity of the cellulosic material allowed the chemotherapy drug to be pre-concentrated and quantified in a range between 50 and 500 μg L^-1 (R² > 0.98). The method also exhibited adequate parameters (limits of detection and quantification, recovery, and precision) indicating its potential application in the monitoring of doxorubicin and similar drugs in saliva.

Green Method for the Selective Electromembrane Extraction of Parabens and Fluoroquinolones in the Presence of NSAIDs by Using Biopolymeric Chitosan Films

A chitosan biopolymeric membrane was successfully used as a support in a green electromembrane extraction procedure for the simultaneous and selective extraction of seven parabens and three fluoroquinolones in the presence of three non-steroidal anti-inflammatory drugs. The optimal experimental conditions (10 mL donor phase and 50 μL acceptor phase, pH 10 in both phases; 80 V of applied voltage during 15 min of extraction time) were determined, providing high enrichment factors for six of the studied parabens (EF ≥ 90) and the three fluoroquinolones (EF ≥ 50). Wide linear concentration ranges (0.5-500 μg L^-1), good linearity (>97%), low limits of detection (0.2-1.1 μg L^-1), and good repeatability (relative standard deviation values 4-10%) were achieved. The proposed method was successfully applied for the extraction of the target analytes from different kinds of water samples (river, lake, and swimming pool). The usage of a chitosan membrane in the extraction process presents many advantages, as it is a biodegradable and versatile support, offering a good alternative to commercial plastic materials commonly used in this methodology and these procedures.

Determination of Tea Aroma Precursor Glycosides: An Efficient Approach via Liquid Chromatography-Tandem Mass Spectrometry

Tea aroma components are often stored as glycosidically bound forms in the tea plant (Camellia sinensis). However, the determination of these glycosides in tea samples is far from optimal. In the present study, we developed a high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) method for simultaneous quantification of eight primary aroma glycosides within 10 min. After systematic optimization of multiple reaction monitoring (MRM) parameters, the proposed method was highly sensitive and accurate. Optimization of the method permitted the efficient extraction of aroma glycosides. The developed method was applied to analyze the contents of aroma glycosides in different organs of tea plants, including the bud, leaves, and stem. Contents of aroma glycosides in the harvested 'Shaancha 1' ranged from 36.1 to 40454.4 μg kg^-1. Geranyl glucoside and primeveroside mainly accumulated in young leaves, while other glycosides mainly accumulated in mature leaves. The findings document a rapid, reliable, and efficient analysis method. This method will be helpful in elucidating the biosynthesis and biotransformation mechanism of tea aroma glycosides and in promoting the development of the tea industry using advanced technological control approaches during the cultivation of tea plants and tea manufacture.

A new microfluidic-chip device followed by sensitive image analysis of smart phone for simultaneous determination of dyes with different acidic-basic properties

In this study, a new microfluidic-chip coupled with micro solid phase extraction (μ-SPE) and a RGB detection system was designed. The method was used for extraction and simultaneous determination of trace amounts of dyes with different acidic-basic properties. Erythrosine (Ery) and Crystal Violet (CV) were selected as acidic and basic model analytes, respectively. The first step of this method is based on the on-chip electromembrane extraction (CEME) of analytes from aqueous solution. The utilized microfluidic system is a single compartment that composed of three polymethyl metacrylate plates (with sandwiched structures) patterned with palm shaped helix channels. The device consisted one pair of platinum electrodes that were embedded in the acceptor phase channels in each side. The middle part was cut and used as the path of the sample. The extracted analytes by CEME were passed through the micro-packed column containing strong cation and anion exchanger sorbents respectively. Two adsorbents were separated by a polypropylene frit and sealed on each side by two polypropylene frites. Following dye adsorption on the sorbents, the colors that emerged were promptly evaluated using RGB colorimetry on a smartphone. Central composite design was used to analyze and optimize the effective parameters on extraction efficiency. The relative standard deviations (RSDs%) based on five replicate measurements were less than 7.8% for RGB and 8.6% for the spectrophotometry technique under ideal conditions. Image analysis using a smartphone yielded LOD values of 15.0 and 10.5 μg L^-1 for Ery and CV, respectively. The CEME- μ-SPE -RGB approach produced findings that were equivalent to those obtained by spectrophotometry. Finally, the approach was used to accurately determine Ery and CV in water samples, yielding good relative recoveries (recovery ≥94.0).

Solid supports and supported liquid membranes for different liquid phase microextraction and electromembrane extraction configurations. A review

Liquid phase microextraction (LPME) and electromembrane microextraction (EME) can be considered as two of the most popular techniques in sample treatment today. Both techniques can be configurated as membrane-assisted techniques to carry out the extraction. These supports provide the required geometry and stability on the contact surface between two phases (donor and acceptor) and improve the reproducibility of sample treatment techniques. These solid support pore space, once is filled with organic solvents, act as a selective barrier acting as a supported liquid membrane (SLM). The SLM nature is a fundamental parameter, and its selection is critical to carry out successful extractions. There are numerous SLMs that have been successfully employed in a wide variety of application fields. The latter is due to the specificity of the selected organic solvents, which allows the extraction of compounds of a very different nature. In the last decade, solid supports and SLM have evolved towards "green" and environmentally friendly materials and solvents. In this review, solid supports implemented in LPME and EME will be discussed and summarized, as well as their applications. Moreover, the advances and modifications of the solid supports and the SLMs to improve the extraction efficiencies, recoveries and enrichment factors are discussed. Hollow fiber and flat membranes, including microfluidic systems, will be considered depending on the technique, configuration, or device used.

Polyaniline-polycaprolactone electrospun nanofibrous mat: new polymeric support with anion exchange characteristic for immobilizing liquid membrane in efficient on-chip electromembrane extraction of polar acidic drugs

The potential of application of an electrospun nanofiber sheet as new polymeric support for immobilizing the liquid membrane, instead of a common commercial polypropylene sheet, in on-chip electromembrane extraction (EME) of some acidic polar drugs followed by HPLC with ultraviolet detection is presented. The nanofiber sheet was prepared by electrospinning a mixture of polycaprolactone and polyaniline. The successful synthesis of the electrospun nanofiber sheet was confirmed by field emission-scanning electron microscopy, energy-dispersive X-ray spectroscopy, elemental mapping, and atomic force microscopy. Several parameters affecting the efficiency of the microextraction method, including pHs of the donor and acceptor phases, applied voltage, sample flow rate, phosphate content of the acceptor phase, and sample volume, were investigated and optimized. After optimization, the linearity range of 0.5-250.0 µg L^-1 and detection limits of 0.2-1.0 µg L^-1 were obtained for the analytes. The extraction recovery values and preconcentration factors were 10.7-55.3% and 16-83, respectively. The presence of polyaniline in the composition of the nanofibers significantly improved the extraction efficiency of the polar acidic drugs due to providing the possibility of various interactions with the target analytes such as hydrogen bonding, π-stacking, and anion exchange. The obtained results demonstrate the excellent efficiency of the synthesized electrospun nanofibrous mat as a novel support membrane for immobilizing 1-octanol and as an interactive substrate for electromembrane extraction of acidic polar drugs. Eventually, the proposed on-chip EME method exhibits acceptable precision (relative standard deviations less than 9.7% (n = 3)) and good accuracy (86-112%) for determining the target analytes in the plasma samples.

A review of sugar beet pectin-stabilized emulsion: extraction, structure, interfacial self-assembly and emulsion stability

In recent years, sugar beet pectin as a natural emulsifier has shown great potential in food and pharmaceutical fields. However, the emulsification performance depends on the molecular structure of sugar beet pectin, and the molecular structure is closely related to the extraction method. This review summarizes the extraction methods of pectin, structure characterization methods and the current research status of sugar beet pectin-stabilized emulsions. The structural characteristics of sugar beet pectin (such as degree of methylation, degree of acetylation, degree of blockiness, molecular weight, ferulic acid content, protein content, neutral sugar side chains, etc.) are of great significance to the emulsifying activity and stability of sugar beet pectin. Compared with traditional hot acid extraction method, ultrasonic-assisted extraction, microwave-assisted extraction, subcritical water-assisted extraction, induced electric field-assisted extraction and enzyme-assisted extraction can improve the yield of sugar beet pectin. At the same time, compared with harsh extraction conditions (too high temperature, too strong acidity, too long extraction time, etc.), mild extraction conditions can better preserve these emulsifying groups in sugar beet pectin molecules, which are beneficial to improve the emulsifying properties of sugar beet pectin. In addition, the interfacial self-assembly behavior of sugar beet pectin induced by the molecular structure is crucial to the long-term stability of the emulsion. This review provides a direction for extracting or modifying sugar beet pectin with specific structure and function, which is instructive for finding alternatives to gum arabic.

Simultaneous quantification of fourteen characteristic active compounds in Eucommia ulmoides Oliver and its tea product by ultra-high performance liquid chromatography coupled with triple quadrupole mass spectrometry (UPLC-QqQ-MS/MS)

Various kinds of bioactive compounds contribute to versatile health-promoting properties of Eucommia ulmoides Oliver (E. ulmoides). In present study, we developed a UPLC-QqQ-MS/MS method for simultaneous quantification of fourteen characteristic active compounds, including 3 lignans, 4 iridoids, 3 flavonoids and 4 phenolics in E. ulmoides and its tea product for the first time. The running time of the method is 6.5 min. It has good linearity, sensitivity, precision, accuracy, and stability. Using this high-throughput method, the distributions of fourteen characteristic active compounds in E. ulmoides and its tea product were clarified. Also, it was found that E. ulmoides tea exhibited superiority in contents of chlorogenic acid as compared with natural resources. Overall, the study provided a rapid, reliable, and efficient analysis method, which could be applied for the quality evaluation of E. ulmoides natural resources and their relative products in the field of food and medicine.

Evaluation of complexing agents in the gel electro-membrane extraction: An efficient approach for the quantification of zinc (II) ions in water samples

In this work, gel electro-membrane extraction (G-EME) combined with flame atomic absorption spectrometry (FAAS) was used for the determination of zinc ions (Zn²⁺) in water samples. For the first time, the effect of the presence of three types of complexing agents such as phenanthroline (Phen), crown ethers (12C4, 15C5, 18C6), and ethylene-diamine-tetra-acetic acid (EDTA) on the extraction efficiency of zinc ions was studied. In addition, the electroendosmosis (EEO) flow as an unwanted actuator was monitored in the presence and absence of complexing agents. By applying 50 V electrical potential across the membrane, the positive charged Zn²⁺ ions were migrated from a donor phase (pH 5.0) through the agarose gel membrane (pH 5.0, containing a complexing agent) into the acceptor phase (pH 3.0). The obtained results showed that the highest extraction recoveries were obtained when crown ethers, especially 1% (w/v) 18C6 was added to the gel membrane. In addition, EEO flow was decreased in the presence of all complexing agents (except EDTA), probably due to the increase in electrical resistance. Using the optimum conditions, the limit of detection (LOD), the limit of quantification (LOQ), and extraction recovery% (ER%) were 5.0 μg L^-1, 15.0 μg L^-1, and 92.5%, respectively. In the end, the applicability of the developed approach was successfully evaluated to determine Zn²⁺ in tap, mineral, and river water samples.

Chitosan biofilms: Insights for the selective electromembrane extraction of fluoroquinolones from biological samples

A selective electromembrane extraction procedure for the extraction of Enrofloxacin, Marbofloxacin and Flumequine, usually employed as antibiotic in veterinarian use, is proposed by using a chitosan biofilm, composed by 60% (w/w) chitosan and 40% (w/w) Aliquat®336, as active biopolymeric support. The interaction mechanism occurring between the target drugs and the biopolymer has been deeply studied using the Quantum Theory of Atoms in Molecules. The obtained results show the interaction between the extracted fluoroquinolones and the biomembrane is stabilized by two hydrogen bonds formed between both the carboxyl and keto groups of the drugs with both the amine and hydroxyl groups of glucosamine in the biopolymer. The energetic results agree with the high extraction efficiency obtained for Marbofloxacin, Enrofloxacin and Flumequine in terms of enrichment factors (83, 82 and 58, respectively) in presence of other fluoroquinolones. Under optimum conditions, the proposed electromembrane extraction method exhibits wide linear ranges of 4.2-200 μg L^-1, 5.6-200 μg L^-1 and 5.1-200 μg L^-1, respectively; low limits of detection close to 1.3 μg L^-1 and appropriate repeatability (relative standard deviation values 4-7%).

Ultrasound-assisted electromembrane extraction of clonazepam from plasma and determination using capillary electrophoresis

In this work, ultrasound-assisted electromembrane extraction (UA-EME) coupled with capillary electrophoresis (CE) and diode array detection (DAD) was developed for the determination of clonazepam from plasma samples. A comparative study was carried out between conventional EME and UA-EME methods to investigate the influence of the ultrasound waves on the extraction efficiency. The central composite design was used for the optimization of the variables affecting these methods to achieve the best extraction efficiency. Under optimal extraction conditions, the UA-EME provided better extraction recovery in a shorter time (58% in 13 min) than the EME method (42% in 30 min). Ultrasound reduces the extraction time and increased recovery by reducing the thickness of the barrier layer. In addition, this method provided a higher pre-concentration factor (203) and a lower limit of detection (3 ng mL^-1) with good repeatability (RSDs were less than 10.11%).

Electrode Surface Potential-Driven Protein Adsorption and Desorption through Modulation of Electrostatic, van der Waals, and Hydration Interactions

When proteins in aqueous solutions are exposed to solid substrates, they adsorb due to the dynamic interplay of electrostatic, van der Waals, and hydration interactions and do so in a rather irreversible fashion, which makes protein recovery troublesome. Here, we use a gold electrode as the solid substrate and modulate the surface potential to systematically induce protein adsorption as well as partial desorption. We use different methods such as surface plasmon resonance, atomic force microscopy, and electrowetting and show that biasing the electrode to more negative potentials (by -0.4 V compared to the open-circuit potential at pH 6) results in an increased adsorption barrier of 6 kJ mol^-1 for the negatively charged protein β-lactoglobulin. Further, we clearly demonstrate that this is due to an increased double layer potential of -0.06 V and an increase in hydration repulsion. This indicates that an electric potential can directly influence surface interactions and thus induce partial β-lactoglobulin desorption. These observations can be the basis for biosensors as well as separation technologies that use only one trigger to steer protein ad- and desorption, which is low in energy requirement and does not generate large waste streams, as is the case for standard protein separation technologies.

Comparative study of low-voltage electric field-induced, ultrasound-assisted and maceration extraction of phenolic acids

This study designed to conduction an investigation into the effect of low-voltage electric field (EF) on the phenolic acids extraction from plant materials. In this regards, Nepeta racemosa was selected to study as a source of phenolic acids. The EF extracted phenolic acids amounts were compared with ultrasound-assisted and maceration extractions. Suitable extraction condition was optimized for ultrasound-assisted extraction. The EF method was optimized for voltage (40, 50 and 60 V) and electrodes gap (1, 1.5, 2 and 2.5 cm). Phenolic acid amounts and antioxidant activity of extracts were investigated by HPLC and DPPH radical methods, respectively. The optimal condition for EF method extraction of total studied phenolic acids amount was obtained 2.5 cm of electrodes gap and 40 V for applied voltage. The results showed a considerable increasing in total phenolic acid amounts and antioxidant activity for EF comparison with other methods. Total phenolic acid amount and antioxidant activity of maceration, ultrasound-assisted and EF extraction methods were obtained as 3.58, 7.57, 19.88 mg/g dw of plant and IC50 values of 110.77, 81.44, 43.74 μg/mL, respectively. Based on obtained results, EF extraction method caused to increase of phenolic acids amounts 3-4 times and antioxidant activity 2-3 times rather that other methods. The findings for Nepeta racemosa extract suggest application of electric field extraction method for food and industrial purposes because of increasing bioactive compounds recovery and decreasing of time and cost.

Microfluidic-enabled versatile hyphenation of electromembrane extraction and thin film solid phase microextraction

In the present study, a versatile combination of electromembrane extraction (EME) with thin film solid phase microextraction (TF-SPME) was introduced using a microfluidic chip device. The device consisted of two single channels on two separate layers. The upper channel was dedicated to donor phase flow pass, while the beneath channel was used as a reservoir for stagnant acceptor solution. A slide of fluorine doped tin oxide (FTO) was accommodated in the bottom of the acceptor phase channel. A thin layer of polyaniline was electrodeposited on the FTO surface to achieve the required thin film for TF-SPME. A stainless-steel wire was embedded in the donor phase channel and another wire was also attached to the FTO surface. The channels were separated by a piece of polypropylene membrane impregnated with 1-octanol and the whole chip was fixed with bolts and nuts. The driving force for the extraction was an 8 V direct current (DC) voltage applied across the supported liquid membrane (SLM). Under the influence of the electrical field, analytes immigrated from sample towards the acceptor phase and then adsorbed on the thin film of the solid phase. Finally, the analytes were desorbed by successive movement of a desorption solvent in the acceptor phase channel followed by injection of the desorption solution to HPLC-UV. The applicability of the proposed device was demonstrated by the determination of four synthetic food dyes: Amaranth, Ponceau 4R, Allura Red, and Carmoisine, as the model analytes. The effective parameters on the efficiency of the both EME and TF-SPME were investigated. Under the optimized conditions, the microchip provided low LODs (1-10 μg L^-1), and a wide linear dynamic range of 10-1000 μg L^-1 for all analytes. The system also offered RSD values lower than 5.5% and acceptable reusability of the thin film for multiple extractions.

Nonaqueous Miscible Liquid-Liquid Electroextraction for Fast Exhaustive Enrichment of Ultratrace Analytes by an Exponential Transfer and Deceleration Mechanism

Conventional electrical-field-assisted sample preparation (EFASP) methods rely on analyte transfer between immiscible phases and require at least one aqueous phase in contact with the electrode. In this paper, we report a novel nonaqueous miscible liquid-liquid electroextraction (NMLEE) technique that enables fast exhaustive enrichment of ultratrace analytes from a milliliter-level donor in a vial to a microliter-level acceptor in a tube. Miscible nonaqueous solvents are used for the donor and acceptor to overcome common EFASP problems such as high charge or mass transfer resistance, loss of analytes in the membrane phase, water electrolysis, back-extraction, bubble generation, and difficulties in the application of high voltage for fast migration. According to theoretical derivation and experimental verification results, the concentrations of analytes in the donor and their migration velocity in the acceptor both decrease exponentially with time, and the extraction recovery correlates linearly with the current variation. These mechanisms result in efficient enrichment by forming an analyte-enriched zone and allow the extraction progress and recovery to be monitored and estimated based on the current variation. NMLEE was coupled with liquid chromatography-mass spectrometry to analyze 10 amphetamine-type drugs, atropine, nortriptyline, and methadone in blood and urine samples. This method provided low limits of detection (0.003-0.1 ng·mL^-1), satisfactory extraction recoveries (89.6-104.1%), and RSDs (<12.3% for intraday and <8.8% for interday), which met the requirements of the ICH guidelines. This study may contribute to the further development of EFASP methods for effective ultratrace analyses in forensic science.

Large-volume electric field-assisted multiphase extraction of malachite green from water samples: A multisample device and method validation

In this work, a new large-volume multiphase, multi-sample electroextraction device was developed and applied to selectively extract malachite green (MG) from water samples. This device was easily constructed with ordinary materials and capable of extracting ten samples simultaneously, obtaining MG preconcentrated on a solid support, to fit into a pipette tip. A multi-well plate was applied to extract MG from aquaculture water samples, and the extracts containing the desorbed MG were analysed by LC-DAD and LC-MS/MS. The signals from both detectors were used in two independent validation procedures. Linearity, matrix effect, selectivity, precision, trueness, and limits of detection and quantification were all evaluated. For both detectors, linearity was demonstrated in the range of 0.5-5 μg L^-1 (R² > 0.98). Matrix effect was insignificant for LC-DAD only, and the average preconcentration factor was about 60 times. Recoveries ranged from 94 to 113% for LC-DAD and 95-115% for LC-MS/MS analysis. ANOVA was applied to estimate the standard deviation under repeatability (6.96-8.61% for LC-DAD and 5.98-7.41% for LC-MS/MS) and within-reproducibility (6.96-8.61% for LC-DAD and 6.56-7.41% for LC-MS/MS) conditions. The limits of detection and quantification for LC-MS/MS analysis were 4.29 and 28.74 ng L^-1, respectively, while, for LC-DAD, these limits were 14.29 and 95.81 ng L^-1, respectively. The results demonstrated that the developed method was suitable for determining MG in water samples, and the large-volume multiphase, multi-sample electroextraction device proved to be a powerful sample preparation technique to obtain high clean-up and large preconcentration levels, which are of paramount importance for environmental applications.

Simultaneous quantification of eleven bioactive phenolic compounds in pigeon pea natural resources and in vitro cultures by ultra-high performance liquid chromatography coupled with triple quadrupole mass spectrometry (UPLC-QqQ-MS/MS)

Bioactive phenolics primarily contribute to versatile health benefits of pigeon pea. For the first time, an UPLC-QqQ-MS/MS method was developed for the quantitative analysis of eleven bioactive phenolic compounds in pigeon pea natural resources (seeds, leaves, and roots) and in vitro cultures (calli and hairy roots). The proposed method could be achieved within 6 min of running time, and displayed the satisfactory linearity, sensitivity, precision, accuracy, and stability. According to analytical results, the distribution of eleven target compounds in different organs of pigeon pea was clarified. Also, it was surprisingly found that pigeon pea in vitro cultures exhibited superiority in contents of genistin and cajaninstilbene acid as compared with natural resources. Overall, the present work provided a rapid and sensitive analysis approach, which could be useful not only for quality control of pigeon pea natural resources, but also for applicability and safety evaluation of pigeon pea in vitro cultures.

Two-phase agarose gel-electromembrane extraction: Effect of organic solvent as an acceptor phase in electroendosmosis flow phenomenon

In this study, a new mode of gel electromembrane extraction (G-EME) namely as "Two-phase G-EME", is suggested for the sensitive quantification of five basic drugs (desipramine, clomipramine, trimipramine, citalopram and clozapine) in biological samples. Compared to classical G-EME which is based on aqueous-gel-aqueous layout, herein, the aqueous acceptor phase (AP) was replaced with organic solvent. Briefly, negative electrode was immersed into the organic AP (with low conductivity) and positive electrode into the aqueous donor phase (DP). Based on our results, this simple adjustment significantly reduced electroendosmosis (EEO) flow phenomenon which is considered as the main issue in G-EME. In the workflow, target analytes were extracted from the 7.0 mL sample, across the fabricated agarose gel membrane, to the 100 μL of the AP under the optimized extraction conditions (organic solvent type: acetonitrile; pH of gel membrane: 5.0, pH of sample solution: 4.0, voltage: 45 V and extraction time: 22 min). Then, the organic AP with analytes was analyzed by gas chromatography (GC) instrument with flame-ionization detector (FID). The methodology offered limits of detection (LODs) and recoveries in the range of 1.0-1.5 ng mL^-1 and 48.5-89.0 %, respectively. Finally, we note that two-phase G-EME assembly was able to extract analytes-of-interest in the convenient and safe manner from the hazardous and difficult-to-process biological specimens such as human serum and urine.

Electromembrane extraction based on agarose gel for the extraction of phenolic acids from fruit juices

Extraction of polar acidic compounds is a challenging task in electromembrane extraction. In this study, gel-electromembrane extraction was employed for the extraction of phenolic acids as the polar acidic compounds from fruit juices. For this aim, the extraction of phenolic acids from the juice samples (4 mL, pH = 6.0) was carried out across the agarose gel membrane (concentration of agarose; 3% (w/v), pH of gel; 10.0, and thickness of membrane: 3 mm) into the acceptor solution (100 μL, pH = 12.0). Also, this extraction process was conducted by applying the optimum potential (25 V) for 15 min to the extraction system. Under the optimized condition, acceptable linearity (R² ≥ 0.993) over a concentration range of 10.0-2500 ng mL^-1 was achieved. The limits of detection were between 3.0 and 15.2 ng mL^-1, while the corresponding repeatabilities ranged from 5.3 to 11.4% (n = 4). The recoveries achieved for the extraction of target compounds were ranged from 26.8 to 74.4%. The proposed method was used for the extraction of phenolic acids from orange, apple and kiwi juices, and the obtained relative recoveries in the range of 78.0-104.2% and RSDs in the range of 6.3 to 11.3% indicated successful extraction of phenolic acids.

Application of Capillary Electrophoresis with Capacitively Coupled Contactless Conductivity Detection (CE-C4D): 2017-2020

Capacitively coupled contactless conductivity detection (C⁴D) has emerged as influential to detect analytes that do not have chromogenic or fluorogenic functional group. Since our last review several new capillary electrophoresis (CE) methods coupled with (CE-C⁴D) have been communicated. The aim of this review is to give an update of the almost all the new applications of CE-C⁴D in the field of pharmaceutical, food and biomedical analysis covering the period from 2017 to April 2020. The utilization of CE with C⁴D in the areas of pharmaceutical, food and biomedical analysis is presented. Finally, concluding remarks and outlooks are discussed.

Comparison of three electromembrane-based extraction systems for NSAIDs analysis in human urine samples

A comparative study on the extraction efficiency of five non-steroidal anti-inflammatories was carried out using three different electromembrane extraction (EME) devices with different geometries. The employed setups were (a) a hollow fiber configuration (HF-EME), (b) a microfluidic device that allows working in semi-dynamic mode (μF-EME), and (c) a static miniaturized flat membrane device (FM-EME). Each system was applied to the extraction of salicylic acid (SAC), ketoprofen (KTP), naproxen (NAX), diclofenac (DIC), and ibuprofen (IBU) and subsequent determination by high-performance liquid chromatography with UV and fluorescence detection (HPLC/UV-DAD-FLD). Voltage, pH composition, and extraction time were optimized for all devices. Additionally, volume ratio was investigated for HF-EME and FM-EME and flow rate for the microfluidic device. HF-EME provides the best result in terms of sensitivity with a limit of detection (LOD) between 0.1 and 1.5 ng mL^-1 for SAC and KTP, respectively, while LODs for μF-EME were between 100 ng mL^-1 and 400 ng mL^-1 for SAC and DIC, respectively; however, a lower amount of sample was required. Finally, the obtained results, in terms of enrichment factors and extraction recoveries, were discussed to establish the advantages and disadvantages of each device. The proposed EME methods were successfully applied to the determination of the target analytes in fortified human urine samples. Graphical abstract.

Simultaneous determination of taxoids and flavonoids in twigs and leaves of three Taxus species by UHPLC-MS/MS

Taxus species are highly concerned due to the presence of anticancer taxoids (especially paclitaxel) and health beneficial flavonoids. For the first time, an UHPLC-MS/MS method was developed for the simultaneous determination of seven taxoids and seven flavonoids in twigs and leaves of three Taxus species. The satisfactory separation of fourteen target compounds was achieved within 5 min of running time on an Agilent ZORBAX Eclipse Plus C18 column (50 mm × 2.1 mm I.D., 1.8 μm) using an acetonitrile-water gradient elution program. Mass transitions of all analytes in selected reaction monitoring acquisition mode were systematically optimized for obtaining the highest signal intensities. Regression equations of all analytes exhibited excellent linearities with coefficients higher than 0.9990, and the lowest limits of quantification of all analytes ranged from 0.01 to 1.66 ng/mL. The intra- and inter-day precisions (relative standard deviations) of all analytes were less than 4.17% for retention time and less than 7.42% for peak area, and the spiking standard recoveries of all analytes ranged from 96.85%-104.77%. By the aid of the proposed method, the distribution of fourteen target compounds in twigs and leaves of Taxus chinensis, Taxus cuspidata, and Taxus media was clearly figured out. Overall, the present work provided a rapid and valid UHPLC-MS/MS approach, which could not only be useful for quality control and applicability assessment of twigs and leaves of the three Taxus species in pharmaceutical and nutraceutical industries, but also offer a good reference for the systematic analysis of taxoids and flavonoids in other Taxus species.

Hollow fiber-based liquid phase microextraction followed by analytical instrumental techniques for quantitative analysis of heavy metal ions and pharmaceuticals

Hollow-fiber liquid-phase microextraction (HF-LPME) and electromembrane extraction (EME) are miniaturized extraction techniques, and have been coupled with various analytical instruments for trace analysis of heavy metals, drugs and other organic compounds, in recent years. HF-LPME and EME provide high selectivity, efficient sample cleanup and enrichment, and reduce the consumption of organic solvents to a few micro-liters per sample. HF-LPME and EME are compatible with different analytical instruments for chromatography, electrophoresis, atomic spectroscopy, mass spectrometry, and electrochemical detection. HF-LPME and EME have gained significant popularity during the recent years. This review focuses on hollow fiber based techniques (especially HF-LPME and EME) of heavy metals and pharmaceuticals (published 2017 to May 2019), and their combinations with atomic spectroscopy, UV-VIS spectrophotometry, high performance liquid chromatography, gas chromatography, capillary electrophoresis, and voltammetry.