Fluorocarbon-bonded magnetic mesoporous microspheres for the analysis of perfluorinated compounds in human serum by high-performance liquid chromatography coupled to tandem mass spectrometry

Rapidly enrichment and detection of per-and polyfluoroalkyl substances in foods using a novel bifunctional covalent organic framework

Per- and polyfluoroalkyl substances (PFASs) are extensively found in foods, posing potential toxicity to humans. Therefore, rapid analysis and monitoring of PFASs in foods are crucial for public health and also a challenge. To detect trace PFASs in foods, construction of sorbents with multiple interactions could be an effective approach. Herein, a cationic-fluorinated covalent organic framework (CF-COF) was prepared by post-modification and used as a magnetic solid-phase extraction adsorbent for adsorption of PFASs. By combining magnetic solid-phase extraction based on CF-COF with liquid chromatography-tandem mass spectrometry (LC - MS/MS), a novel method was developed for determination of eight long-chain PFASs in foods. Under optimized conditions, the method exhibited low detection limits (0.003-0.019 ng/g) and satisfactory recovery rates (73.5-118%) for PFASs. This study introduces a novel idea for the development of adsorbents targeting PFASs, along with a new analytical method for monitoring of PFASs in foods.

Application of cobalt-cerium-iron ternary layered double hydroxide for extraction of perfluorooctane sulfonate followed by HPLC-MS/MS analysis

Herein, Ce-doped CoFe layered double hydroxide (LDH), noted as CoCeFe ternary LDH, was prepared using the co-precipitation route. Prosperous synthesis of CoFe LDH and successful partial replacement of iron cations with cerium cations in CoCeFe ternary LDH were confirmed by X-ray diffraction patterns, energy-dispersive X-ray spectroscopy, and elemental dot-mapping images. Nanosheet morphology was recognized for both CoFe LDH and CoCeFe ternary LDH from scanning electron microscopy and transmission electron microscopy micrographs. In the following, a dispersive solid phase extraction (DSPE) method was developed using the synthesized CoCeFe ternary LDH as a sorbent for extracting perfluorooctanesulfonic acid (PFOS) from wastewater samples. For the selective analysis of PFOS, high-performance liquid chromatography-tandem mass spectroscopy (HPLC-MS/MS) in multiple reaction monitoring mode was used. Analytical parameters such as the limit of detection equal to 0.02 μg/L, with a linear range of 0.05-300 μg/L, the limit of quantification equal to 0.05 μg/L, and an enrichment factor equal to 23.3 were achieved for PFOS at the optimized condition (sorbent: 5 mg of CoCeFe ternary LDH, eluent type and volume: 150 μL mobile phase, pH: 3, adsorption time: 3 min, and desorption time: 5 min). The developed strategy for the analysis of PFOS was tested in real wastewater samples, including copper mine and petrochemical wastewater. The amount of analytes in real samples was calculated using the standard addition method, and good relative recovery in the range of 86%-105% was obtained. The main novelty of this research is the application of CoCeFe ternary LDH to extract the PFOS from wastewater using the DSPE method for determination by HPLC-MS/MS.

Fluorine-functionalized magnetic amino microporous organic network for enrichment of perfluoroalkyl substances

Perfluoroalkyl substances (PFAS) are persistent organic pollutants that pose significant risks to human health and the environment. Efficient and selective enrichment of these compounds was crucial for their accurate detection and quantification in complex matrices. Herein, we report a novel magnetic solid-phase extraction (MSPE) method using fluorine-functionalized magnetic amino-microporous organic network (Fe3O4@MONNH2@F7) adsorbent for the efficient enrichment of PFAS from aqueous samples. The core-shell Fe3O4@MONNH2@F7 nanosphere was synthesized, featuring magnetic Fe3O4 nanoparticles as the core and a porous amino-functionalized MONs coating as the shell, which was further modified by fluorination. The synthesized adsorbent material exhibited high specific surface area, hydrophobicity, and abundant fluorine groups, facilitating efficient and selective adsorption of PFAS via electrostatic attraction, hydrophobic-hydrophobic interactions, fluorine-fluorine interactions, π-CF interactions and hydrogen bonding. Furthermore, the MSPE method coupled with ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) allowed for the rapid, sensitive, and accurate determination of ultra-trace PFAS in real water samples, human serum, and human follicular fluid. Under optimal conditions, the established MSPE method demonstrated a linear range (2 to 2000 ng L-1), with a correlation coefficient exceeding 0.9977, low limits of detection ranging from 0.54 to 1.47 ng L-1, with a relative standard deviation (RSD) < 9.1%. Additionally, the method showed excellent performance in complex real samples (recovery ratio of 81.7 to 121.6 %). The adsorption mechanism was investigated through kinetic, isotherm, and molecular simulation studies, revealing that the introduction of fluorine groups enhanced the hydrophobic interaction and fluorine-fluorine attraction between the adsorbent and PFAS. This work provides a proof-of-concept strategy for designing adsorbent materials with high efficiency and selectivity by post-modification, which has great potential for the detection and analysis of PFAS in complex samples.

All-in-one strategy to construct bifunctional covalent triazine-based frameworks for simultaneous extraction of per- and polyfluoroalkyl substances and polychlorinated naphthalenes in foods

Per- and polyfluoroalkyl substances (PFASs) and polychlorinated naphthalenes (PCNs) are of growing concern due to their toxic effects on the environment and human health. There is an urgent need for strategies to monitor and analyze the coexistence of PFASs and PCNs, especially in food samples at trace levels, to ensure food safety. Herein, a novel β-cyclodextrin (β-CD) derived fluoro-functionalized covalent triazine-based frameworks named CD-F-CTF was firstly synthesized. This innovative framework effectively combines the porous nature of the covalent organic framework and the host-guest recognition property of β-CD enabling the simultaneous extraction of PFASs and PCNs. Under the optimal conditions, a simple and rapid method was developed to analyze PFASs and PCNs by solid-phase extraction (SPE) based simultaneous extraction and stepwise elution (SESE) strategy for the first time. When coupled with liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) and gas chromatography-tandem mass spectrometry (GC-MS/MS), this method achieved impressive detection limits for PFASs (0.020 -0.023 ng/g) and PCNs (0.016 -0.075 ng/g). Furthermore, the excellent performance was validated in food samples with recoveries of 76.7-107 % (for PFASs) and 78.0-108 % (for PCNs). This work not only provides a simple and rapid technique for simultaneous monitoring of PFASs and PCNs in food and environmental samples, but also introduces a new idea for the designing novel adsorbents with multiple recognition sites.

Application of magnetic carbon nanotube composite nanospheres in magnetic solid-phase extraction of trace perfluoroalkyl substances from environmental water samples

The layer-by-layer assembly technique was used to synthesize novel multiwalled carbon nanotubes (MWCNTs) on magnetic carbon (Fe₃O₄@C) nanospheres, which were then used to extract six perfluoroalkyl substances (PFAS) in environmental real water samples using ultra high-performance liquid chromatography coupled to tandem mass spectrometry. The as-synthesized sorbent MWCNTs@Fe₃O₄@C was employed for magnetic solid-phase extraction (MSPE). The as-prepared MWCNTs@Fe₃O₄@C was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and vibrating sample magnetometer (VSM). The main extraction parameters were systematically optimized by Box-Behnken design. Under optimal conditions, excellent results were achieved. The synthesized sorbent showed wide linear ranges (0.1-1000 ng L^-1), low detection limits (0.03-0.09 ng L^-1) and good repeatability (3.80%-9.52%) for extracting and detecting six PFAS. The developed method was also applied to analyze six PFAS from environmental water samples. This study indicated that MWCNTs@Fe₃O₄@C composites are promising materials for the extraction and determination of PFAS from water samples.

Superhydrophobic fluorinated microspheres for fluorous affinity chromatography

Fluorous affinity chromatography has received growing attention in separation and purification of fluoro compounds, but the wettability of the fluorinated stationary phases is seldom noticed. Here, we construct a series of micro-sized fluorine-containing microspheres by solvothermal precipitation polymerization. The fluorinated microspheres could be obtained with narrow size distribution at even high monomer loading of 15 wt%. Through alternating fluoro monomer, both the particle size and the wettability of the microsphere array could be tuned. Among them, the poly(divinylbenzene -dodecafluoroheptyl methacrylate), P(DVB-DFHMA), microsphere (6.1 μm) arrays displays superhydrophobicity with 153.2° water contact angle. The P(DVB-DFHMA) fluorinated microspheres (7.58% fluorine content) can be packed into steel-less columns as stationary phase for high-performance liquid chromatography. The retention mechanism of the fluorinated column is proven to be the specific fluorine-fluorine interaction. Compared to the commercial C18 silica column, the fluorinated column can completely separate fluorine-containing compounds under high water content mobile phase, including small fluoro molecules and fluoro macromolecules, at much lower back pressure by fluorous affinity.

Fabrication of a Magnetic Fluorinated Covalent Organic Framework for the Selective Capture of Benzoylurea Insecticide Residue in Beverages

Efficient capture of benzoylurea insecticide (BU) residue in food is a vital procedure for food safe monitoring. Herein, a core-shell structured magnetic fluorinated covalent organic framework with good magnetic responsiveness and abundant fluorine affinity sites was successfully synthesized, suitable for magnetic solid-phase extraction (MSPE) of BUs. Using a room-temperature synthesis strategy, the magnetic fluorinated covalent organic framework was fabricated by in situ polymerization of 1,3,5-tris(4-aminophenyl) triazine (TAPT) and 2,3,5,6-tetrafluoroterephthaldehyde (TFTA) on the surface of carboxylated Fe₃O₄ nanoparticles. The competitive adsorption experiment and molecular simulation verified that this magnetic fluorinated covalent organic framework possesses favorable adsorption affinity for BUs. This magnetic fluorinated covalent organic framework could be easily regenerated and reused at least eight times with no reduction of enrichment performance. Combining this magnetic fluorinated covalent organic framework-based MSPE with high-performance liquid chromatography-tandem mass spectrometry, a novel sensitive method for the analysis of BUs was developed. In yellow wine and fruit juice samples, good linear correlations were obtained for BUs in the range of 10-2000 and 20-4000 ng·L^-1, respectively. The limit of quantitation of the BUs ranged from 1.4 to 13.3 ng·L^-1 in the two beverage matrices. Desirable precision was achieved, with intraday and interday relative standard deviations lower than 11%.

A novel analytical strategy for the determination of perfluoroalkyl acids in various food matrices using a home-made functionalized fluorine interaction SPME in combination with LC-MS/MS

In this study, a fluorine-fluorine interaction approach through fluoridating boron nitride nanosheets (BNNs) for sensing perfluoroalkyl acids (PFAAs) in multiple food matrices was developed. Through a facile hydrothermal fluorination modification, the BNNs were transferred into homogeneous fluorinated boron nitride nanoparticles (F-BNNs) with robust networks and specific surface area. After morphological modification, the particles displayed strong adsorption and sensing capabilities on PFAAs in both solid and liquid food matrix. Under the evaluation of mass spectrometry, F-BNNs based microextraction approach exhibited low method detection limits (MDLs) in the ranges of 0.9-3.9 pg mL^-1 and 3.6-15.8 pg g^-1 for milk and meat matrices, respectively, with satisfactory repeatability (RSD% <13.5%) and recoveries (77.7-110.5%). This work not only depicted a facile approach for preparing F-BNNs based SPME fiber, but also provided a routine analysis protocol for monitoring PFAAs in food systems.

Room-temperature synthesis of amino-functionalized magnetic covalent organic frameworks for efficient extraction of perfluoroalkyl acids in environmental water samples

The novel amino-functionalized magnetic covalent organic framework nanocomposites (Fe₃O₄@[NH₂]-COFs) were fabricated at room temperature, which were explored as a magnetic adsorbent for magnetic solid-phase extraction (MSPE). On the basis of the hydrophobic surfaces of magnetic nanocomposites and introduction of primary amines into the COFs shell, Fe₃O₄@[NH₂]-COFs displayed excellent enrichment capacity in "catching" ultratrace perfluoroalkyl acids (PFAAs) from water samples because of the synergistic combination of hydrophobic and electrostatic interactions between PFAAs and Fe₃O₄@[NH₂]-COFs. Under the optimized pretreatment and instrumental parameters, the proposed pretreatment approach, which hybridized MSPE using Fe₃O₄@[NH₂]-COFs and HPLC-MS/MS, displayed favorable linearity (10-10,000 ng L^-1) with R² (0.9990-0.9999), low limits of detection (0.05-0.38 ng L^-1), and excellent repeatability (3.7-9.2%). Moreover, the established approach was successfully utilized to determine PFAAs in real water samples with spiked recoveries ranging from 72.1% to 115.4%. Results indicated that Fe₃O₄@[NH₂]-COFs would be a potential alternative for MSPE of PFAAs at ultra-low levels.

Analysis of fluorinated compounds by micellar electrokinetic chromatography - mass spectrometry

Micellar electrokinetic chromatography (MEKC) is a good separation technique with high efficiency, high selectivity and simple preparation process. Hyphenation of MEKC with mass spectrometry (MS) could extend its application in complex sample analysis. However, direct coupling MEKC using commonly used surfactants like sodium dodecyl sulfate (SDS) with ESI-MS will lead to strong signal suppression. In this work, a MEKC-MS method using volatile ammonium perfluorooctanoate as surfactant was developed. The MS compatibility of ammonium perfluorooctanoate was investigated. The result revealed that there is no signal suppression even the concentration of ammonium perfluorooctanoate was up to 300 mM. Meanwhile, we found that ammonium perfluorooctanoate used as surfactant in MEKC provided powerful F-F interaction and hydrophobic interaction, which was beneficial for separation of fluorinated compounds. Using the ammonium perfluorooctanoate based MEKC method, several groups of fluorinated compounds, which cannot be separated using non-fluorinated surfactants like lauric acid and SDS based MEKC method, were baseline separated. Finally, the MEKC-ESI-MS method was successfully applied for analysis of two herbicides including fluometuron and fenuron in lake water samples with high separation efficiency, high sensitivity, good linearity and reproducibility.

Ionic covalent organic frameworks for the magnetic solid-phase extraction of perfluorinated compounds in environmental water samples

A novel magnetic ionic covalent organic framework (Fe₃O₄@EB-iCOFs) was designed and synthesized. It was then characterized by X-ray diffraction, N₂ adsorption-desorption analysis, and magnetic measurements, among others. The material shows the advantages of ionic property, large surface area, and magnetic responsiveness. It has potential of magnetic solid-phase extraction (MSPE) of perfluorinated compounds (PFCs). A method for the determination of PFCs based on MSPE-HPLC-MS/MS was established. The method has excellent linearity (r ≥ 0.995) in the working range 1-1000 ng L^-1 , good repeatability (1.4-5.8%, n = 6), low limits of detection in the range 0.1-0.8 ng L^-1 and satisfactory recoveries (between 73.9 and 108.3%).

Insights into the structure-performance relationships of extraction materials in sample preparation for chromatography

Sample preparation is one of the most crucial steps in analytical processes. Commonly used methods, including solid-phase extraction, dispersive solid-phase extraction, dispersive magnetic solid-phase extraction, and solid-phase microextraction, greatly depend on the extraction materials. In recent decades, a vast number of materials have been studied and used in sample preparation for chromatography. Due to the unique structural properties, extraction materials significantly improve the performance of extraction devices. Endowing extraction materials with suitable structural properties can shorten the pretreatment process and improve the extraction efficiency and selectivity. To understand the structure-performance relationships of extraction materials, this review systematically summarizes the structural properties, including the pore size, pore shape, pore volume, accessibility of active sites, specific surface area, functional groups and physicochemical properties. The mechanisms by which the structural properties influence the extraction performance are also elucidated in detail. Finally, three principles for the design and synthesis of extraction materials are summarized. This review can provide systematic guidelines for synthesizing extraction materials and preparing extraction devices.

Recent development of nanoparticle-assisted metabolites analysis with mass spectrometry

Metabolomics systematically studies the changes of metabolites in biological systems in the temporal or spatial dimensions. It is a challenging task for comprehensive analysis of metabolomics because of diverse physicochemical properties and wide concentration distribution of metabolites. Used as enrichment sorbents, chemoselective probes, chromatographic stationary phases, MS ionization matrix, nanomaterials play excellent roles in improving the selectivity, separation performance, detection sensitivity and identification efficiency of metabolites when mass spectrometry is employed as the detection technique. This review summarized the recent development of nanoparticle-assisted metabolites analysis in terms of assisting the pretreatment of biological samples, improving the separation performance and enhancing the MALDI-MS detection.

Fluorine and nitrogen functionalized magnetic graphene as a novel adsorbent for extraction of perfluoroalkyl and polyfluoroalkyl substances from water and functional beverages followed by HPLC-Orbitrap HRMS determination

Most of the reported magnetic adsorbents are difficult to absorb multi-class of per- and polyfluoroalkyl substances (PFASs), especially the short-chain PFASs. In this work, a novel fluorine and nitrogen functionalized magnetic graphene (G-NH-FBC/Fe₂O₃) was first synthesized and characterized by scanning electron microscope (SEM), Fourier Transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). The as-prepared G-NH-FBC/Fe₂O₃ was utilized as adsorbents for the magnetic solid-phase extraction (MSPE) of 19 PFASs from water and functional beverages and showed excellent adsorption capacity probably due to the hydrophobic interaction. Under the optimal pretreatment and instrumental conditions, a selective and sensitive high performance liquid chromatography Orbitrap high resolution mass spectrometry (HPLC-Orbitrap HRMS) method was developed for the determination of PFASs. Results indicated that the proposed method had favorable linearity (R² ≥ 0.994) within a wide range of concentrations. Limit of detection (LOD) and limit of quantification (LOQ) for the developed method ranged from 3 ng/L to 15 ng/L and 10 ng/L to 49 ng/L, respectively. Finally, the method was successfully applied to determine PFASs in drinking water, river water, tap water, factory drainage and functional beverages with recoveries ranging from 71.9% to 117.6% and relative standard deviation of <10%. The prepared G-NH-FBC/Fe₂O₃ was easy to recycle and could be reused for five times without significant decrease in extraction recoveries of PFASs. These results demonstrated that this novel magnetic G-NH-FBC/Fe₂O₃ could efficiently enrich PFASs and the proposed method is reliable and robust for the determination of PFASs in water and beverage samples.

Analysis of Perfluorinated Compounds in Environmental Water Using Decyl-perfluorinated Magnetic Mesoporous Microspheres as Magnetic Solid-Phase Extraction Materials and Microwave-Assisted Derivatization Followed by Gas Chromatography-mass Spectrometry

In this work, a new method was developed for perfluorinated compounds (PFCs) analysis in water samples based on decyl-perfluorinated magnetic mesoporous nanocomposites microspheres-assisted extraction and microwave-assisted derivatization followed by gas chromatography-mass spectrometry analysis. The decyl-perfluorinated magnetic mesoporous nanocomposites have several advantages such as fast separation ability, good dispersibility in water sample and high selective preconcentration of PFCs. Various parameters, including eluting solvent and volume, the amounts of absorbents, extraction time and elution time, the microwave-assisted derivatization conditions were optimized. Validation studies showed that this method has good linearity (r2 > 0.9970), satisfactory precision (RSD < 7.8%) and high recovery (93-107%). The limits of detection were found to be 0.055-0.086 μg/L and the limits of quantification be 0.18-0.28 μg/L, respectively. The results indicated that the proposed method has advantages of convenience, good sensitivity and high efficiency. The method has been applied successfully to analyze perfluorinated organic acids in real water samples.

A C8-Modified Graphene@mSiO2 Composites Based Method for Quantification of Gallic Acid in Rat Plasma after Oral Administration of Changtai Granule and Its Application to Pharmacokinetics

A rapid, effective extraction technique has been established for measuring the gallic acid in rat plasma by using sandwich-structured graphene/mesoporous silica composites with C₈-modified interior pore-walls as adsorbent. The unique characteristics of the graphene-silica composites excluded large molecules, like proteins, from the mesopore channels as a result of size exclusion effect, leading to a direct extraction of drug molecules from protein-rich biological samples such as plasma without any other pretreatment procedure. Followed by elution and centrifugation, the gallic acid-absorbed composites were rapidly isolated before LC-MS/MS. Serving as a reliable tool for analysis of Traditional Chinese Medicine: Changtai Granule, the newly developed method was fully validated and successfully applied in the pharmacokinetic study of gallic acid in rat plasma. Extraction recovery, matrix effect and stability were satisfactory in rat plasma. According to the results of pharmacokinetic studies, Changtai Granule exhibited greater adsorption, distribution and clearance properties of gallic acid in the treatment of ulcerative colitis. Hence, this study may offer a valuable alternative to simplify and speed up sample preparation, and be useful for clinical studies of related preparations.

Preconcentration and Determination of Perfluoroalkyl Substances (PFASs) in Water Samples by Bamboo Charcoal-Based Solid-Phase Extraction Prior to Liquid Chromatography-Tandem Mass Spectrometry

In this work, bamboo charcoal was used as solid-phase extraction adsorbent for the enrichment of six perfluoroalkyl acids (PFAAs) in environmental water samples before liquid chromatography–tandem mass spectrometry analysis. The specific porous structure, high specific surface area, high porosity, and stability of bamboo charcoal were characterized. Several experimental parameters which considerably affect extraction efficiency were investigated and optimized in detail. The experimental data exhibited low limits of detection (LODs) (0.01–1.15 ng/L), wide linear range (2–3 orders of magnitude and R ≥ 0.993) within the concentration range of 0.1–1000 ng/L, and good repeatability (2.7–5.0%, n = 5 intraday and 4.8–8.3%, n = 5 interday) and reproducibility (5.3–8.0%, n = 3). Bamboo charcoal was successfully used for the enrichment and determination of PFAAs in real environmental water samples. The bamboo charcoal-based solid-phase extraction coupled with liquid chromatography–tandem mass spectrometry analysis possessed great potential in the determination of trace PFAA levels in environmental water samples.

Use of phenyl/tetrazolyl-functionalized magnetic microspheres and stable isotope labeled internal standards for significant reduction of matrix effect in determination of nine fluoroquinolones by liquid chromatography-quadrupole linear ion trap mass spectrometry

In this study, the strategy of unique adsorbent combined with isotope labeled internal standards was used to significantly reduce the matrix effect for the enrichment and analysis of nine fluoroquinolones in a complex sample by liquid chromatography coupled to quadrupole linear ion trap mass spectrometry (LC-QqQ_LIT-MS/MS). The adsorbent was prepared conveniently by functionalizing Fe₃O₄@SiO₂ microspheres with phenyl and tetrazolyl groups, which could adsorb fluoroquinolones selectively via hydrophobic, electrostatic, and π-π interactions. The established magnetic solid-phase extraction (MSPE) method as well as using stable isotope labeled internal standards in the next MS/MS detection was able to reduce the matrix effect significantly. In the process of LC-QqQ_LIT-MS/MS analysis, the precursor and product ions of the analytes were monitored quantitatively and qualitatively on a QTrap system equipped simultaneously with the multiple reaction monitoring (MRM) and enhanced product ion (EPI) scan. Subsequently, the enrichment method combined with LC-QqQ_LIT-MS/MS demonstrated good analytical features in terms of linearity (7.5-100.0 ng mL^-1, r > 0.9960), satisfactory recoveries (88.6%-118.3%) with RSDs < 12.0%, LODs = 0.5 μg kg^-1 and LOQs = 1.5 μg kg^-1 for all tested analytes. Finally, the developed MSPE-LC-QqQ_LIT-MS/MS method had been successfully applied to real pork samples for food-safety risk monitoring in Ningxia Province, China. Graphical abstract Mechanism of reducing matrix effect through the as-prepared adsorbent.

Elucidation of the Molecular Determinants for Optimal Perfluorooctanesulfonate Adsorption Using a Combinatorial Nanoparticle Library Approach

Perfluorooctanesulfonate (PFOS) persistently accumulates in the environment and in humans, causing various toxicities. To determine the key molecular determinants for optimal PFOS specificity and efficiency, we designed and synthesized a combinatorial gold nanoparticle (GNP) library consisting of 18 members with rationally diversified hydrophobic, electrostatic, and fluorine-fluorine interaction components for PFOS bindings. According to our findings, the electrostatic and F-F interactions between PFOS and nanoparticles are complementary. When F-F attractions are relatively weak, the electrostatic interactions are dominant. As F-F interactions increase, the electrostatic contributions are reduced to as low as 20%, demonstrating that F-F binding may overpower even electrostatic interactions. Furthermore, F-F interactions (28-79% binding efficiency) are 2-fold stronger than regular hydrophobic interactions (15-39% binding efficiency) for PFOS adsorption, explaining why these novel PFOS-binding nanoparticles are superior to other conventional materials based on either hydrophobic or electrostatic binding. The PFOS adsorption by the optimized nanoparticles performs well in the presence of ionic interferences and in environmental wastewater. This library mapping approach can potentially be applied to recognition mechanism investigation of other pollutants and facilitate the discovery of effective monitoring probes and matrices for their removal.

Analysis of the presence of perfluoroalkyl substances in water, sediment and biota of the Jucar River (E Spain). Sources, partitioning and relationships with water physical characteristics

The presence, sources and partitioning of 21 perfluoroalkyl substances (PFASs: C4-C14, C16, C18 carboxylate, C4, C6-C10 sulfonates and C8 sulfonamide) were assessed in water, sediment, and biota of the Jucar River basin (E Spain). Considering the three matrices, perfluoropentanoate (PFPeA) and perfluorooctane sulfonate (PFOS) were the most frequent compounds, being remarkable the high occurrence of short-chain PFASs (C≤8), which are intended to replace the long-chain ones in several industrial and commercial applications. In general, all samples were contaminated with at least one PFAS, with the exception of three fish samples. Mean concentrations detected in sediments (0.22-11.5ng g(-1)) and biota (0.63-274µgkg(-1)) samples were higher than those measured in water (0.04-83.1ngL(-1)), which might suggest (bio) accumulation. The occurrence of PFAS is related to urban and industrial discharges (Cuenca city in the upper part of basin, and car's factory, and effluents of the sewage treatment plant (STP) of Alzira, in the lower part). Increasing pollution gradients were found. On the other hand, higher contamination levels were observed after regulation dams of the catchment pointing out their importance in the re-distribution of these contaminants. None of the hazard quotients (HQ) calculated indicate potential risk for the different tropic levels considered (algae, Daphnia sp. and fish). PFAS concentrations found in this study can be considered in acceptable levels if compared to existing Regulatory Legislation and, consequently, they do not pose an immediate human health risk.