Platinum nanoparticles functionalized nitrogen doped graphene platform for sensitive electrochemical glucose biosensing

Glucose Biosensor Based on Glucose Oxidase Immobilized on BSA Cross-Linked Nanocomposite Modified Glassy Carbon Electrode

Glucose sensors based blood glucose detection are of great significance for the diagnosis and treatment of diabetes because diabetes has aroused wide concern in the world. In this study, bovine serum albumin (BSA) was used to cross-link glucose oxidase (GOD) on a glassy carbon electrode (GCE) modified by a composite of hydroxy fullerene (HFs) and multi-walled carbon nanotubes (MWCNTs) and protected with a glutaraldehyde (GLA)/Nafion (NF) composite membrane to prepare a novel glucose biosensor. The modified materials were analyzed by UV-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), and cyclic voltammetry (CV). The prepared MWCNTs-HFs composite has excellent conductivity, the addition of BSA regulates MWCNTs-HFs hydrophobicity and biocompatibility, and better immobilizes GOD on MWCNTs-HFs. MWCNTs-BSA-HFs plays a synergistic role in the electrochemical response to glucose. The biosensor shows high sensitivity (167 μA·mM^-1·cm^-2), wide calibration range (0.01-3.5 mM), and low detection limit (17 μM). The apparent Michaelis-Menten constant Kmapp is 119 μM. Additionally, the proposed biosensor has good selectivity and excellent storage stability (120 days). The practicability of the biosensor was evaluated in real plasma samples, and the recovery rate was satisfactory.

Electrochemical assay of acetamiprid in vegetables based on nitrogen-doped graphene/polypyrrole nanocomposites

Dual-mode electrochemical aptasensor based on nitrogen-doped graphene (NG) doped with the conducting polymer polypyrrole (PPy) nanocomposite is proposed for the determination of acetamiprid. NG/PPy was electrodeposited onto the glassy carbon electrode (GCE) using cyclic voltammetry technique. NG/PPy/GCE showed outstanding electrocatalytic activity for the oxidation of nitrite due to "active region" induced by the charge redistribution of carbon atoms. The ultrasensitive dual-mode biosensor for acetamiprid could be easily developed by coupling acetamiprid aptamers with the NG/PPy hybrid. The specific binding between acetamiprid and the aptamers resulted in the increase of differential pulse voltammetry (DPV) signal change and the decrease of chronoamperometry (CA) signal, and the concentration of acetamiprid could be measured. The working potentials of DPV and CA were - 0.2 ~ 0.4 V and - 0.4 ~ 0.4 V (vs. SCE), respectively. The dual-mode acetamiprid biosensor showed a wide linear range from 10^-12 to 10^-7 g mL^-1, with low detection limits of 1.15 × 10^-13 g mL^-1 and 7.32 × 10^-13 g mL^-1 through DPV and CA modes, respectively. Moreover, owing to high active area and superior conductivity, as well as good electrocatalytic ability, the dual-sensing platform based on NG/PPy nanocomposite supported the quantification of acetamiprid in complex samples. A dual-mode electrochemical aptasensor based on NG/PPy nanocomposite for acetamiprid detection was proposed through both the increase of differential pulse voltammetry (DPV) signal change and the decrease of chronoamperometry (CA) signal of the nitrite oxidation electrocatalyzed by NG/PPyn in sensors and biosensors.

Glucose oxidase@Cu-hemin metal-organic framework for colorimetric analysis of glucose

The work presents a novel glucose oxidase@Cu-hemin metal-organic frameworks (GOD@ Cu-hemin MOFs) with a ball-flower structure as bienzymatic catalysts for detection of glucose. The GOD@Cu-hemin MOFs exhibits great stability as compared with free horseradish peroxidase and GOD toward harsh conditions because the ball-flower-like shell of Cu-hemin MOF effectively protects from GOD. Thus, the GOD@Cu-Hemin MOFs can be used in external harsh conditions such as high temperature and acid/base. The GOD@Cu-hemin MOFs is capable of sensitive and selective detection of glucose via peroxidase-like of Cu-hemin MOFs and GOD by using 3,3',5,5'-tetramethylbenzidine (TMB) as a substrate. Under the existence of glucose, O₂ is reduced into H₂O₂ via GOD@Cu-hemin MOFs. The produced H₂O₂ as well as Cu-hemin MOFs oxidize TMB into blue oxTMB which shows UV-Vis absorbance at 652. The absorption intensity of oxTMB linearly increases with the increasing concentration of glucose from 0.01 to 1.0 mM with detection limit of 2.8 μM. An integrated agarose hydrogel film (Aga/GOD@Cu-hemin MOF/TMB) sensor is rationally designed for colorimetric detection of glucose. The sensor displays a response range of 30 μM-0.8 mM with a detection limit of 0.01 mM. The result indicates that the Cu-hemin MOFs are an ideal carrier for the encapsulation of enzymes.

A novel electrochemical immunosensor for the highly sensitive and selective detection of the depression marker human apolipoprotein A4

The fabrication of electrochemical biosensors to directly, rapidly and ultrasensitively detect disease markers in urine or blood samples has become a new and competitive challenge in the field of sensor research. In this paper, a novel electrochemical immunosensor with high selectivity and sensitivity for the detection of the depression marker human apolipoprotein A4 (Apo-A4) was successfully constructed using zeolite imidazole ester metal organic skeleton-nitrogen doped graphene composites (ZIF-8@N-Gr). To this end, because of the higher surface area and biocompatibility, ZIF-8 with abundant biomolecular binding sites provided a good microenvironment for effectively immobilizing antigens. ZIF-8@N-Gr presented a flake structure, as the electrode displayed excellent electrical conductivity, which enhanced the electron transfer and significantly amplified the current signal of the immunosensor. More importantly, these immunosensors are capable of assaying human apolipoprotein A4 (Apo-A4) in 100% serum without suffering from any significant biological interference. Under optimized experimental conditions, the sensor was used for the analysis of whole serum samples and presented a wide linear range from 1.47 × 10^-10 g/mL to 3.00 × 10^-7 g/mL with a low detection limit of 8.33 × 10^-11 g/mL (3σ, n = 15). The satisfactory results of human serum sample analysis indicated that the proposed immunosensor had promising potential in the clinical diagnosis of depression.

Applications of Graphene and Its Derivatives in Chemical Analysis

In this review, the applications of graphene and its derivatives in the chemical analysis have been described. The properties of graphene materials which are essential for their use in chemical and biochemical analysis are characterized. The materials are used in sensors and biosensors, in electrochemistry, in chromatography and in the sample preparation techniques. Chemical and electrochemical sensors containing graphene materials are useful devices for detecting some chemical and biochemical compounds. Chromatographic columns for HPLC with graphene containing stationary phases may be used for separation of polar and nonpolar components of some specific mixtures. Graphene materials could be successfully employed during sample preparation for analysis with SPE, magnetic SPE, and SPME techniques. HighlightsThe review of the applications of graphene (G) and its derivatives, graphene oxide (GO) and reduced graphene oxide (rGO), in chemical and biochemical analysis is proposed.The electron donor-acceptor and proton donor-acceptor interactions for the graphene based materials - analytes systems and their impact on the analysis results are discussed, particularly:    i) in electrochemistry,ii) in chromatography,iii) in modern sample preparation techniquesiv) in sensors of different types.The essence of the thermal stability and the nomenclature of the graphene based materials in their different applications in chemical systems of different classes was discussed (and suggested).The benefits of using SPME fibers with immobilized graphene materials have been presented in detail.

Electrochemical Enzyme Biosensors Revisited: Old Solutions for New Problems

Worldwide legislation is driving the development of novel and highly efficient analytical tools for assessing the composition of every material that interacts with Consumers or Nature. The biosensor technology is one of the most active R&D domains of Analytical Sciences focused on the challenge of taking analytical chemistry to the field. Electrochemical biosensors based on redox enzymes, in particular, are highly appealing due to their usual quick response, high selectivity and sensitivity, low cost and portable dimensions. This review paper aims to provide an overview of the most important advances made in the field since the proposal of the first biosensor, the well-known hand-held glucose meter. The first section addresses the current needs and challenges for novel analytical tools, followed by a brief description of the different components and configurations of biosensing devices, and the fundamentals of enzyme kinetics and amperometry. The following sections emphasize on enzyme-based amperometric biosensors and the different stages of their development.

A technology roadmap of smart biosensors from conventional glucose monitoring systems

The objective of this review article is to focus on technology roadmap of smart biosensors from a conventional glucose monitoring system. The estimation of glucose with commercially available devices involves analysis of blood samples that are obtained by pricking finger or extracting blood from the forearm. Since pain and discomfort are associated with invasive methods, the non-invasive measurement techniques have been investigated. The non-invasive methods show advantages like non-exposure to sharp objects such as needles and syringes, due to which there is an increase in testing frequency, improved control of glucose concentration and absence of pain and biohazard materials. This review study is aimed to describe recent invasive techniques and major noninvasive techniques, viz. biosensors, optical techniques and sensor-embedded contact lenses for glucose estimation.

Sensing at the Surface of Graphene Field-Effect Transistors

Recent research trends now offer new opportunities for developing the next generations of label-free biochemical sensors using graphene and other two-dimensional materials. While the physics of graphene transistors operated in electrolyte is well grounded, important chemical challenges still remain to be addressed, namely the impact of the chemical functionalizations of graphene on the key electrical parameters and the sensing performances. In fact, graphene - at least ideal graphene - is highly chemically inert. The functionalizations and chemical alterations of the graphene surface - both covalently and non-covalently - are crucial steps that define the sensitivity of graphene. The presence, reactivity, adsorption of gas and ions, proteins, DNA, cells and tissues on graphene have been successfully monitored with graphene. This review aims to unify most of the work done so far on biochemical sensing at the surface of a (chemically functionalized) graphene field-effect transistor and the challenges that lie ahead. The authors are convinced that graphene biochemical sensors hold great promise to meet the ever-increasing demand for sensitivity, especially looking at the recent progresses suggesting that the obstacle of Debye screening can be overcome.

Nitrogen-doped graphene-chitosan matrix based efficient chemiluminescent immunosensor for detection of chicken interleukin-4

Chicken interleukin-4 (ChIL-4), which is released by activated type 2 helper (Th2) cells following their stimulation in vitro, is an important indicator for the study of cell-mediated immunity in chickens after infection or vaccination. In this work, the first ChIL-4 chemiluminescent (CL) immunosensor was developed via the immobilization of monoclonal ChIL-4 antibodies on a nitrogen-doped graphene (NG)-chitosan nanocomposite matrix. NG nanosheets were used for the first time in the CL immunoassay to provide a biocompatible microenvironment for the immobilized capture antibody. The ChIL-4 immunosensor was characterized systematically. The proposed immunosensor displayed a wide linear range from 0.05 to 70ngmL^-1 and a low detection limit of 0.02ngmL^-1 at a signal-to-noise ratio of 3. Compared to traditional assay methods, this system was more flexible, simple, rapid, and sensitive. Moreover, this CL immunoassay system had an excellent detection and fabrication reproducibility, a high specificity, an acceptable accuracy, and a high stability. This work enables the specific detection of ChIL-4 and the further study of its role in the immune responses of poultry.

Morphology controlled synthesis of platinum nanoparticles performed on the surface of graphene oxide using a gas–liquid interfacial reaction and its application for high-performance electrochemical sensing

Electrochemical sensing of nitrite based on morphology-controlled Pt/GO nanocomposites which were obtained using a novel gas–liquid interfacial reaction.

Real-Time Evaluation of Live Cancer Cells by an in Situ Surface Plasmon Resonance and Electrochemical Study

This work presents a new strategy of the combination of surface plasmon resonance (SPR) and electrochemical study for real-time evaluation of live cancer cells treated with daunorubicin (DNR) at the interface of the SPR chip and living cancer cells. The observations demonstrate that the SPR signal changes could be closely related to the morphology and mass changes of adsorbed cancer cells and the variation of the refractive index of the medium solution. The results of light microscopy images and 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide studies also illustrate the release or desorption of HepG2 cancer cells, which were due to their apoptosis after treatment with DNR. It is evident that the extracellular concentration of DNR residue can be readily determined through electrochemical measurements. The decreases in the magnitudes of SPR signals were linearly related to cell survival rates, and the combination of SPR with electrochemical study could be utilized to evaluate the potential therapeutic efficiency of bioactive agents to cells. Thus, this label-free, real-time SPR-electrochemical detection technique has great promise in bioanalysis or monitoring of relevant treatment processes in clinical applications.