On the use of ionic liquids as mobile phase additives in high-performance liquid chromatography. A review

Effect of ionic liquids as mobile phase additives on retention behaviors of G-quadruplexes in reversed-phase high performance liquid chromatography

G-quadruplexes (G4s) play an important role in a variety of biological processes and have extensive application prospects. Due to the significance of G4s in physiology and biosensing, studies on G4s have attracted much attention, stimulating the development or improvement of methods for G4 structures and polymorphism analysis. In this work, ionic liquids (ILs) were involved as mobile phase additives in reversed-phase high performance liquid chromatography (RP-HPLC) to analyse G4s with various conformations for the first time. How ILs affected the retention behaviors of G4s was investigated comprehensively. It was found that the addition of ILs markedly enhanced G4 retention, along with obvious amelioration on chromatographic peak shapes and separation. The influence of pH of mobile phase and types of ILs were also included in order to acquire an in-depth understanding. It appeared that the effect of ILs on G4 retention behaviors was the result of a combination of various interactions between G4s with the hydrophobic stationary phase and with the IL-containing mobile phase, where ion pair mechanism and enhanced hydrophobic interaction dominated. The findings of this work revealed that ILs could effectively improve the separation of G4s in RP-HPLC, which was conducive to G4 structural analysis, especially for G4s polymorphism elucidation.

Triclosan and related compounds in the environment: Recent updates on sources, fates, distribution, analytical extraction, analysis, and removal techniques

Triclosan (TCS) has been widely used in daily life because of its broad-spectrum antibacterial activities. The residue of TCS and related compounds in the environment is one of the critical environmental safety problems, and the pandemic of COVID-19 aggravates the accumulation of TCS and related compounds in the environment. Therefore, detecting TCS and related compound residues in the environment is of great significance to human health and environmental safety. The distribution of TCS and related compounds are slightly different worldwide, and the removal methods also have advantages and disadvantages. This paper summarized the research progress on the source, distribution, degradation, analytical extraction, detection, and removal techniques of TCS and related compounds in different environmental samples. The commonly used analytical extraction methods for TCS and related compounds include solid-phase extraction, liquid-liquid extraction, solid-phase microextraction, liquid-phase microextraction, and so on. The determination methods include liquid chromatography coupled with different detectors, gas chromatography and related methods, sensors, electrochemical method, capillary electrophoresis. The removal techniques in various environmental samples mainly include biodegradation, advanced oxidation, and adsorption methods. Besides, both the pros and cons of different techniques have been compared and summarized, and the development and prospect of each technique have been given.

Application of Ionic Liquids as Mobile Phase Additives for Simultaneous Analysis of Nicotine and Its Metabolite Cotinine in Human Plasma by HPLC-DAD

Nicotine and cotinine are very polar basic molecules, which makes it difficult to analyze them by reversed-phase liquid chromatography (RPLC), especially in biological samples. Additives with an ionic character have been traditionally used in RPLC as silanol suppressors. The aim of our study was to investigate the potential of selected ionic liquids in improving chromatographic performance in comparison with common additives. The experimental design was conducted using the following ionic liquids as the mobile phase modifiers: 1-butyl-3-methylimidazolium tetrafluoroborate, BMIM[BF₄] and 1-butyl-3-methylimidazolium hexafluorophosphate BMIM[PF₆], with a C18 chromatographic column. The separation of these alkaloids on silica-based RPLC stationary phases was successfully conducted by the addition of BMIM[BF₄] in an acetonitrile:phosphate-buffer-based mobile phase in a pH range of 2.3-5.2. The presented chromatographic method can be used as alternative for monitoring studies or pharmacokinetic application necessary for the evaluation of tobacco smoke exposure.

Aqueous liquid chromatography with mobile phases of sodium dodecyl sulphate and ionic liquid

In conventional reversed-phase liquid chromatography (RPLC) with hydro-organic solvents, basic cationic solutes yield retained, broad, asymmetric peaks, owing to their interaction with free anionic silanols in the stationary phase. RPLC mobile phases to which the anionic surfactant sodium dodecyl sulphate (SDS), or an ionic liquid (IL) are added, have been proposed as solutions, since these additives are able to block the silanol effect thus improving the chromatographic performance. With these additives, it is however necessary to increase the elution strength by adding an organic solvent, such as an alcohol or acetonitrile. A novel aqueous liquid chromatographic mode (in the absence of organic solvent) is here proposed, where the mobile phases contain only a mixture of aqueous solutions of SDS and an IL derived from 1-alkyl-3-methylimidazolium associated to chloride, both environmentally friendly. When these reagents are added, the anionic surfactant adsorbed on the stationary phase is able to attract the cationic solutes, whereas the adsorbed IL cation repels them. The combination of both effects (attraction and repulsion) allows the modulation of retention, by varying the IL/SDS ratio. Given the character of the additives, a type of green liquid chromatography is achieved. In this work, the chromatographic behavior of six basic compounds of pharmaceutical interest, the β-adrenoceptor antagonists acebutolol, atenolol, carteolol, metroprolol, oxprenolol and propranolol, is examined. In order to assess the chromatographic behavior of the mixed mobile phases containing SDS and IL, changes in retention, peak profile and resolution of mixtures of the analytes were explored at varying concentration of the additives.

Molecular Modelling of Ionic Liquids: Situations When Charge Scaling Seems Insufficient

Charge scaling as an effective solution to the experiment-computation disagreement in molecular modelling of ionic liquids (ILs) could bring the computational results close to the experimental reference for various thermodynamic properties. According to the large-scale benchmark calculations of mass density, solvation, and water-ILs transfer-free energies in our series of papers, the charge-scaling factor of 0.8 serves as a near-optimal option generally applicable to most ILs, although a system-dependent parameter adjustment could be attempted for further improved performance. However, there are situations in which such a charge-scaling treatment would fail. Namely, charge scaling cannot really affect the simulation outcome, or minimally perturbs the results that are still far from the experimental value. In such situations, the vdW radius as an additional adjustable parameter is commonly tuned to minimize the experiment-calculation deviation. In the current work, considering two ILs from the quinuclidinium family, we investigate the impacts of this vdW-scaling treatment on the mass density and the solvation/partition thermodynamics in a fashion similar to our previous charge-scaling works, i.e., scanning the vdW-scaling factor and computing physical properties under these parameter sets. It is observed that the mass density exhibits a linear response to the vdW-scaling factor with slopes close to -1.8 g/mL. By further investigating a set of physiochemically relevant temperatures between 288 K and 348 K, we confirm the robustness of the vdW-scaling treatment in the estimation of bulk properties. The best vdW-scaling parameter for mass density would worsen the computation of solvation/partition thermodynamics, and a marginal decrease in the vdW-scaling factor is considered as an intermediate option balancing the reproductions of bulk properties and solvation thermodynamics. These observations could be understood in a way similar to the charge-scaling situation. i.e., overfitting some properties (e.g., mass density) would degrade the accuracy of the other properties (e.g., solvation free energies). Following this principle, the general guideline for applying this vdW-tuning protocol is by using values between the density-derived choice and the solvation/partition-derived solution. The charge and current vdW scaling treatments cover commonly encountered ILs, completing the protocol for accurate modelling of ILs with fixed-charge force fields.

Quantitative evaluation of reversed-phase packing material based on calcium carbonate microspheres modified with an alternating copolymer

Considering the vulnerability of silica gel to alkaline mobile phases, a highly alkaline stable stationary phase for HPLC is required to separate basic compounds with high separation efficiency. To address this issue, we have developed a high alkaline stable packing material (CaCO₃-PMAcO) based on mesoporous calcium carbonate microspheres modified with poly(maleic acid-alt-1-octadecene). In this study, we report further investigation of the separation performance of CaCO₃-PMAcO column by systematically evaluating the effects of particle size and chromatographic conditions. Based on the theory of the van Deemter equation, the separation efficiency was related to the size of CaCO₃-PMAcO particles (2.9 - 5.7 µm). The evaluation of thermodynamics of retention by changing the column temperature from 20 °C to 45 °C implied that the retention mode was dominated by hydrophobic interaction associated with the exothermic enthalpy changes (-11.1 to -12.5 kJ/mol). The results of column selectivity tests revealed that the CaCO₃-PMAcO column had hydrophobic selectivity comparable to C₁₈ silica gel columns (α_P/B; CaCO₃-PMAcO column: 1.53, C₁₈ column: 1.69), and higher shape/steric selectivity (α_Tri/Ter; CaCO₃-PMAcO column: 1.56, C₁₈ column: 0.955). In practice, the CaCO₃-PMAcO column could be applied to the separation of not only alkylbenzenes and polycyclic aromatic hydrocarbons, but also to basic tricyclic antidepressants by using an alkaline mobile phase (pH 12).

Recent Advances on Ionic Liquid Uses in Separation Techniques

Ionic liquids (ILs) are non-molecular solvents; specifically, molten salts with low melting points, often below 100 °C and even below room temperature, thus allowing these solvents to remain liquid [...]

L-Histidinium Chiral Ionic Liquid Functionalized β-Cyclodextrin as Chiral Selector in Capillary Electrophoresis

Nowadays, ionic liquids (ILs) functionalized cyclodextrins (CDs) have drawn increasing attention in chiral separation. Herein, a novel β-CD derivative functionalized by L-histidinium IL, mono-6-deoxy-6-L-histidinium-β-cyclodextrin chloride (L-HMCDCl), was synthesized for the first time and utilized for enantioseparation of nefopam and chlorphenamine in capillary electrophoresis. The L-HMCDCl exhibited superior enantioselectivity compared with native β-CD. The effect of some key parameters such as chiral selector concentration, buffer pH and applied voltage on the enantioseparation was investigated in detail. In the interest of the chiral discrimination mechanism and the enhanced enantioselectivity of L-HMCDCl, molecular modeling with AutoDock was employed to study the interaction, which was in good agreement with experimental results.

Unique Orientation of the Solid-Solid Interface at the Janus Particle Boundary Induced by Ionic Liquids

This study reveals the unique role on Janus particles of the solid-solid interface at the boundary in determining particle interactions and assembly. In an aqueous ionic liquid (IL) solution, Janus spheres adopt intriguing orientations with their boundaries pinned on the glass substrate. It was further discovered that the orientation was affected by the particle amphiphilicity as well as the chemical structure and concentration of the IL. Further characterization suggests that the adsorption on the hydrophilic side is due to both an electrostatic interaction and hydrogen bonding, while adsorption on the hydrophobic side is due to hydrophobic attraction. Through the concerted interplay of all these interactions, the amphiphilic boundary may attract an excessive amount of IL cations, which guide the unique orientations of the Janus spheres. The results highlight the importance of the Janus boundary that has not been recognized previously. Adsorption at the solid-solid interfaces may inspire new applications in areas such as separation and catalysis.

The Current Role of Graphene-Based Nanomaterials in the Sample Preparation Arena

Since its discovery in 2004 by Novoselov et al., graphene has attracted increasing attention in the scientific community due to its excellent physical and chemical properties, such as thermal/mechanical resistance, electronic stability, high Young's modulus, and fast mobility of charged atoms. In addition, other remarkable characteristics support its use in analytical chemistry, especially as sorbent. For these reasons, graphene-based materials (GBMs) have been used as a promising material in sample preparation. Graphene and graphene oxide, owing to their excellent physical and chemical properties as a large surface area, good mechanical strength, thermal stability, and delocalized π-electrons, are ideal sorbents, especially for molecules containing aromatic rings. They have been used in several sample preparation techniques such as solid-phase extraction (SPE), stir bar sorptive extraction (SBSE), magnetic solid-phase extraction (MSPE), as well as in miniaturized modes as solid-phase microextraction (SPME) in their different configurations. However, the reduced size and weight of graphene sheets can limit their use since they commonly aggregate to each other, causing clogging in high-pressure extractive devices. One way to overcome it and other drawbacks consists of covalently attaching the graphene sheets to support materials (e.g., silica, polymers, and magnetically modified supports). Also, graphene-based materials can be further chemically modified to favor some interactions with specific analytes, resulting in more efficient hybrid sorbents with higher selectivity for specific chemical classes. As a result of this wide variety of graphene-based sorbents, several studies have shown the current potential of applying GBMs in different fields such as food, biological, pharmaceutical, and environmental applications. Within such a context, this review will focus on the last five years of achievements in graphene-based materials for sample preparation techniques highlighting their synthesis, chemical structure, and potential application for the extraction of target analytes in different complex matrices.

Hydrophilic Liquid Chromatography versus Reversed-Phase Liquid Chromatography in the Absence and the Presence of 1-Hexyl-3-methylimidazolium Chloride for the Analysis of Basic Compounds

In reversed-phase liquid chromatography (RPLC), positively charged basic compounds yield broad and asymmetric peaks, as a result of ionic interactions with free silanols that remain on conventional silica-based columns. Diverse solutions have been proposed to mask the silanophilic activity, which is translated to an improved peak shape. In this work, the chromatographic performance of hydrophilic interaction liquid chromatography (HILIC) was evaluated as an alternative to the addition of an ionic liquid (IL) to the aqueous-organic mobile phase used with RPLC columns, for the analysis of eight β-adrenoceptor antagonists. ILs change the behavior of RPLC stationary phases owing to adsorption on their surface. Meanwhile, in HILIC, a layer of adsorbed water is formed on the stationary phase surface. The association of cationic basic compounds with the adsorbed additive ions, hydrophilic partitioning on the HILIC columns, and other interactions, give rise to complex retention mechanisms. The chromatographic behavior was examined in terms of retention, elution strength, selectivity, peak shape and resolution, using acetonitrile-water mobile phases buffered at pH 3. Both chromatographic modes, RPLC with added IL and HILIC, proved to be a viable solution to the problem of poor peak shape for basic compounds.

Sample Preparation Using Graphene-Oxide-Derived Nanomaterials for the Extraction of Metals

Graphene oxide is a compound with a form similar to graphene, composed of carbon atoms in a sp2 single-atom layer of a hybrid connection. Due to its significant surface area and its good mechanical and thermal stability, graphene oxide has a plethora of applications in various scientific fields including heterogenous catalysis, gas storage, environmental remediation, etc. In analytical chemistry, graphene oxide has been successfully employed for the extraction and preconcentration of organic compounds, metal ions, and proteins. Since graphene oxide sheets are negatively charged in aqueous solutions, the material and its derivatives are ideal sorbents to bind with metal ions. To date, various graphene oxide nanocomposites have been successfully synthesized and evaluated for the extraction and preconcentration of metal ions from biological, environmental, agricultural, and food samples. In this review article, we aim to discuss the application of graphene oxide and functionalized graphene oxide nanocomposites for the extraction of metal ions prior to their determination via an instrumental analytical technique. Applications of ionic liquids and deep eutectic solvents for the modification of graphene oxide and its functionalized derivatives are also discussed.

Comparison of surfactant-mediated liquid chromatographic modes with sodium dodecyl sulphate for the analysis of basic drugs

In reversed-phase liquid chromatography (RPLC), basic drugs are positively charged at the usual working pH range and interact with free anionic silanols present in conventional silica-based stationary phases. This translates into stronger retention and tailed and broadened peaks. This problem can be resolved by the addition of reagents to the mobile phase that are adsorbed on the stationary phase, avoiding the access of solutes to silanols. Among these additives, surfactants under micellar conditions have provided good silanol suppressing potency through the technique known as micellar liquid chromatography (MLC). The most common example of this is anionic sodium dodecyl sulphate (SDS). When SDS is at moderate concentration in the presence of high organic solvent content, micelles are not formed and the chromatographic mode is known as high submicellar liquid chromatography (HSLC). In contrast, the addition of an oil to an aqueous solution of SDS containing micelles gives rise to microemulsions in a chromatographic mode known as microemulsion liquid chromatography (MELC). A comprehensive comparison of the chromatographic behaviour of a set of basic β-adrenoceptor antagonists analysed by MLC, HSLC and MELC is carried out in this work, in terms of retention, peak shape and organic solvent consumption. The study shows that high submicellar eluents reduce retention and enhance efficiency with respect to conventional RPLC and MLC. Meanwhile, MELC allows reduced analysis times with less organic solvent with respect to HSLC. The narrower and more symmetrical peaks in MLC, HSLC and MELC, with respect to conventional RPLC, reveal the presence of silanol masking.

Liquid chromatographic separation of alkaloids in herbal medicines: Current status and perspectives

Alkaloids are a widespread group of basic compounds in herbal medicines and have attracted great interest due to various pharmaceutical activities and desirable druggability. Their distinctive structures make chromatographic separation fairly difficult. Peak tailing, poor resolution, and inferior column-to-column reproducibility are common obstacles to overcome. In order to provide a valuable reference, the methodologies and/or strategies on liquid chromatographic separation of alkaloids in herbal medicines proposed from 2012 to 2019 are thoroughly summarized.

Separation and indirect ultraviolet detection of ferrous and trivalent iron ions by using ionic liquids in ion chromatography

A method of simultaneous separation and indirect ultraviolet detection of different valence iron ions Fe²⁺ and Fe³⁺ by using ionic liquids as mobile phase additives and ultraviolet absorption reagents on a cation exchange column functionalized with carboxylic acid group was developed. The effects of ionic liquids, organic acids, detection wavelength, etc. on separation and detection of Fe²⁺ and Fe³⁺ were investigated and the mechanism was discussed. The pyridinium and imidazolium ionic liquids were not only ultraviolet absorption reagents of indirect ultraviolet detection but also effective components for separating Fe²⁺ and Fe³⁺ . The separation and detection of Fe²⁺ and Fe³⁺ can be achieved using 0.5 mmol/L pyridinium ionic liquid-1.2 mmol/L methanesulfonic acid as the mobile phase. The determination of Fe²⁺ and Fe³⁺ had a good linear relationship in the concentration range of 1-100 mg/L. The limits of detection of Fe²⁺ and Fe³⁺ were 0.12 and 0.09 mg/L, respectively. This method was applied to the actual sample detection in the field of medical analysis. The spiked recoveries were between 97.3 and 99.5%, and the relative standard deviations were less than 0.6%. The method is simple, accurate, and reliable, and is an analytical method with universal and practical value.

Designing a sustainable mobile phase composition for melamine monitoring in milk samples based on micellar liquid chromatography and natural deep eutectic solvent

Modified micellar liquid chromatography (MLC) with a natural deep eutectic solvent (NADES), produced from choline chloride (ChCl) and ethylene glycol (EG), was employed for melamine (MEL) monitoring in milk matrix. This sustainable mobile phase was attained through chemometrical optimization of crucial variables including concentration of sodium dodecyl sulphate ([SDS]) along with volume percentages of both NADES and glacial acetic acid (GAC). The desirability function and central composite design were utilized as chemometrical tools. Retention time (t_R-MEL), and chromatographic peak width of MEL at 50% of its height (W_50%-MEL) were considered for finding the best possible arrangement of the influential factors in the configuration of the mobile phase. Under the optimal experimental conditions of 0.10 mol L^-1 SDS, 4% (v/v) NADES, and 4% (v/v) GAC, the results showed that both t_R-MEL and W_50%-MEL drastically decreased when NADES was a part of the mobile phase composition. This indicated that ChCl-EG-based NADES had a significant impact on improving the chromatographic behaviour of an ionizable polar compound, MEL. At the optimal point, MEL was eluted in approximately 10 min without being interfered by coexisting proteins and endogenous species in milk. The practical performance of the mobile phase was established through direct injection of milk samples into the MLC system. The eligibility criteria of the United State-Food and Drug Administration (US-FDA) were considered for validation of the introduced methodology.

Estimation of Solute-Stationary Phase and Solute-Mobile Phase Interactions in the Presence of Ionic Liquids

The presence of free silanols on alkyl-bonded reversed-phase stationary phases is responsible for broad and asymmetrical peaks when basic drugs are chromatographed with conventional octadecylsilane (C18) columns due to ionic interactions. In the last few years, ionic liquids (ILs) have attracted attention to reduce this undesirable silanol activity. ILs should be considered as dual modifiers (with a cationic and anionic character), which means that both cations and anions are able to adsorb on the stationary phase, creating a positively or negatively charged layer, depending on the relative adsorption. The accessibility of basic compounds to the silanols is prevented by both the IL cation and anion, improving the peak profiles. A comparative study of the performance of six imidazolium-based ILs, differing in their cation/anions, as modifiers of the chromatographic behavior of a group of ten β-adrenoceptor antagonists, is addressed. Mobile phases containing cationic amines (triethylamine and dimethyloctylamine) were used as a reference for the interpretation of the results. Using a mathematical model based on two chemical equilibria, the association constants between the solutes and modified stationary phase as well as those between solutes and the additive in the mobile phase were estimated. These values, together with the changes in retention and peak shape, were used to obtain conclusions about the retention mechanism, changes in the nature of the chromatographic system, and silanol suppression effect.

Fundamental Properties of Packing Materials for Liquid Chromatography

The high performance of chemically-modified silica gel packing materials is based on the utilization of pure silica gels. Earlier silica gels used to be made from inorganic silica; however, nowadays, silica gels are made from organic silanes. The surface smoothness and lack of trace metals of new silica gels permits easy surface modifications (chemical reactions) and improves the reproducibility and stability. Sharpening peak symmetry is based on developing better surface modification methods (silylation). Typical examples can be found in the chromatography of amitriptyline for silanol testing and that of quinizarin for trace metal testing. These test compounds were selected and demonstrated sensitive results in the measurement of trace amounts of either silanol or trace metals. Here, we demonstrate the three-dimensional model chemical structures of bonded-phase silica gels with surface electron density for easy understanding of the molecular interaction sites with analytes. Furthermore, a quantitative explanation of hydrophilic and hydrophobic liquid chromatographies was provided. The synthesis methods of superficially porous silica gels and their modified products were introduced.

Enantioseparation of amino alcohol drugs by nonaqueous capillary electrophoresis with a maltobionic acid-based ionic liquid as the chiral selector

This study deals with the nonaqueous capillary electrophoretic enantioseparation of twenty-two amino alcohol drugs with a maltobionic acid (MA)-based ionic liquid (tetramethylammonium maltobionic acid, TMA-MA) as the novel chiral selector.

Determination of Heavy Metal Ions and Organic Pollutants in Water Samples Using Ionic Liquids and Ionic Liquid-Modified Sorbents

Water pollution, especially by inorganic and organic substances, is considered as a critical problem worldwide. Several governmental agencies are listing an increasing number of compounds as serious problems in water because of their toxicity, bioaccumulation, and persistence. In recent decades, there has been considerable research on developing analytical methods of heavy metal ions and organic pollutants from water. Ionic liquids, as the environment-friendly solvents, have been applied in the analytical process owing to their unique physicochemical properties. This review summarizes the applications of ionic liquids in the determination of heavy metal ions and organic pollutants in water samples. In addition, some sorbents that were modified physically or chemically by ionic liquids were applied in the adsorption of pollutants. According to the results in all references, the application of new designed ionic liquids and related sorbents is expected to increase in the future.

Advances in detection and quantification of methylcytosine and its derivatives

Methylation of the fifth carbon atom in cytosine is an epigenetic modification of deoxyribonucleic acid that plays important roles in numerous cellular processes and disease pathogenesis. Three additional states of cytosine, that is, 5-hydroxymethylcytosine, 5-formylcytosine and 5-carboxylcytosine, have been identified and associated with the diagnosis and/or prognosis of diseases. However, accurate measurement of those intermediates is a challenge since their global levels are relatively low. A number of innovative methods have been developed to detect and quantify these compounds in biological samples, such as blood, tissue and urine, etc. This review focuses on recent advancement in detection and quantification of four cytosine modifications, based on which, the development, diagnosis, and prognosis of diseases could be monitored through non-invasive procedures.

Greening Reversed-Phase Liquid Chromatography Methods Using Alternative Solvents for Pharmaceutical Analysis

The greening of analytical methods has gained increasing interest in the field of pharmaceutical analysis to reduce environmental impacts and improve the health safety of analysts. Reversed-phase high-performance liquid chromatography (RP-HPLC) is the most widely used analytical technique involved in pharmaceutical drug development and manufacturing, such as the quality control of bulk drugs and pharmaceutical formulations, as well as the analysis of drugs in biological samples. However, RP-HPLC methods commonly use large amounts of organic solvents and generate high quantities of waste to be disposed, leading to some issues in terms of ecological impact and operator safety. In this context, greening HPLC methods is becoming highly desirable. One strategy to reduce the impact of hazardous solvents is to replace classically used organic solvents (i.e., acetonitrile and methanol) with greener ones. So far, ethanol has been the most often used alternative organic solvent. Others strategies have followed, such as the use of totally aqueous mobile phases, micellar liquid chromatography, and ionic liquids. These approaches have been well developed, as they do not require equipment investments and are rather economical. This review describes and critically discusses the recent advances in greening RP-HPLC methods dedicated to pharmaceutical analysis based on the use of alternative solvents.