Molecularly imprinted polymer-sol-gel tablet toward micro-solid phase extraction: I. Determination of methadone in human plasma utilizing liquid chromatography–tandem mass spectrometry

Molecularly imprinted polymers in the analysis of chlorogenic acid: A review

Chlorogenic acid, a phenolic compound, is prevalent across various plant species and has been known for its pharmacological advantages. Health care experts have identified chlorogenic acid as a potential biomarker for treatment of a wide range of illnesses. Therefore, achieving efficient extraction and analysis of chlorogenic acid from plants and their products has become essential. Molecularly imprinted polymers (MIPs) are highly effective adsorbent for the extraction of chlorogenic acid from complex matrices. Currently, there is a lack of comprehensive review article that consolidate the methods utilized for the purification of chlorogenic acid through molecular imprinting. In this context, we have surveyed the common approaches employed in preparing MIPs specifically designed for the analysis of chlorogenic acid, including both conventional and newly developed. This review discusses the advantages, limitations of polymerization techniques and proposed strategies to produce more efficient MIPs for chlorogenic acid enrichment in complex samples. Additionaly, we present advanced imprinting methods for designing MIPs, which improve the adsorption capacity, sensitivity and selectivity towards chlorogenic acid.

Simultaneous determination of methadone and tramadol in serum samples by ultrasonic-assisted micro solid phase extraction and gas chromatography-mass spectrometry

Ultrasonic-assisted dispersive micro solid phase extraction (UA-DMSPE) is proposed as a fast and easy technique for the extraction and preconcentration of methadone and tramadol from serum samples. Different sorbents including carbon nanotubes, oxidized carbon nanotubes, and TiO2 nanoparticles were compared to extract methadone and tramadol. The best performance was obtained using oxidized carbon nanotubes due to the strong affinity between the drugs and carbon nanotube adsorbents. Final analysis of drugs performed by using gas chromatography-mass spectrometric detection. Different parameters affecting the extraction efficiency, such as the sample volume, amount of adsorbent, desorption solvent type and volume, centrifugation time, and speed were investigated and optimized. The striking features of this technique are correlated to its speed and the small volumes of sample (about 1 mL), desorption solvent (about 50 μL), and adsorbent (about 0.001 g) for analysis of drugs, and finally, milder centrifugation conditions relative to the previously reported adsorbent. The optimal parameters were achieved as follows: pH value was set at 9, the sample volume was adjusted to 1200 µL, the amount of adsorbent used was 1 mg, the extraction time was set at 5 min, and the volume of the desorption solvent was adjusted to 50 µL. The limits of detections (0.5 and 0.8 ng mL-1) and quantifications (1.5 and 2.5 ng mL-1) were obtained for methadone and tramadol, respectively. The developed method also showed good repeatability, relative standard deviation (RSD) of 9.49 % and 7.47 % (n = 5), for the spiked aqueous solution at the concentration level of 10, 50, and 100 ng mL-1 for analytes, and linearity, R ≥ 0.9809. The results showed that UA-DMSPE is a quick, relatively inexpensive, and environmentally friendly alternative technique for the extraction of opiate drugs from serum samples.

Innovative Solid-Phase Extraction Strategies for Improving the Advanced Chromatographic Determination of Drugs in Challenging Biological Samples

In the past few decades, considerable scientific strides have been made in the subject of drug analysis in human biological samples. However, the risk caused by incorrect drug plasma levels in patients still remains an important concern. This review paper attempts to investigate the advances made over the last ten years in common sample preparation techniques (SPT) for biological samples based on solid sorbents, including solid-phase extraction (SPE) and solid-phase micro-extraction (SPME), and in particular in the field of molecularly imprinted polymers (MIPs), including non-stimuli-responsive and stimuli-responsive adsorbents. This class of materials is known as 'smart adsorbents', exhibiting tailored responses to various stimuli such as magnetic fields, pH, temperature, and light. Details are provided on how these advanced SPT are changing the landscape of modern drug analysis in their coupling with liquid chromatography-mass spectrometry (LC-MS) analytical techniques, a general term that includes high-performance liquid chromatography (HPLC) and ultra-high performance liquid chromatography (UHPLC), as well as any variation of MS, such as tandem (MS/MS), multiple-stage (MSn), and high-resolution (HRMS) mass spectrometry. Some notes are also provided on coupling with less-performing techniques, such as high-performance liquid chromatography with ultraviolet (HPLC-UV) and diode array detection (HPLC-DAD) detection. Finally, we provide a general review of the difficulties and benefits of the proposed approaches and the future prospects of this research area.

Recent molecularly imprinted polymers applications in bioanalysis

Molecular imprinted polymers (MIPs) as extraordinary compounds with unique features have presented a wide range of applications and benefits to researchers. In particular when used as a sorbent in sample preparation methods for the analysis of biological samples and complex matrices. Its application in the extraction of medicinal species has attracted much attention and a growing interest. This review focus on articles and research that deals with the application of MIPs in the analysis of components such as biomarkers, drugs, hormones, blockers and inhibitors, especially in biological matrices. The studies based on MIP applications in bioanalysis and the deployment of MIPs in high-throughput settings and optimization of extraction methods are presented. A review of more than 200 articles and research works clearly shows that the superiority of MIP techniques lies in high accuracy, reproducibility, sensitivity, speed and cost effectiveness which make them suitable for clinical usage. Furthermore, this review present MIP-based extraction techniques and MIP-biosensors which are categorized on their classes based on common properties of target components. Extraction methods, studied sample matrices, target analytes, analytical techniques and their results for each study are described. Investigations indicate satisfactory results using MIP-based bioanalysis. According to the increasing number of studies on method development over the last decade, the use of MIPs in bioanalysis is growing and will further expand the scope of MIP applications for less studied samples and analytes.

Progress in pretreatment of methadone: an update since 2015

Methadone, a µ-opioid receptor agonist, is widely used in pain-relieving and treating opioid dependence. If not strictly controlled, as an opioid substitute, it can lead to abuse and cause more severe withdrawal responses than heroin. Also, overdose or abuse of this drug in clinical use may provide severe side effects such as apnea, circulatory collapse, cardiac arrest, and even death. For these reasons, simple, rapid, and efficient methods have been developed for the pretreatment of methadone. This review presents a comprehensive conclusion of the pretreatment methods used for methadone in various sample matrices, focusing on the developments since 2015. Traditionally used pretreatment methods like solid-phase extraction and liquid-liquid extraction are discussed and newly developed methods like solid-phase microextraction and liquid-liquid microextraction along with new materials applied are focused.

Green molecularly imprinted polymers for sustainable sample preparation

The use of molecularly imprinted polymers in sample preparation as selective sorbent materials has received great attention during the last years leading to analytical methods with unprecedented selectivity. However, with the progressive implementation of Green Analytical Chemistry principles, it is necessary to critically review the greenness of synthesis and further use of molecularly imprinted polymers in sample preparation. Accordingly, in the present review, the different steps and strategies for the preparation of molecularly imprinted polymers, the used reagents, as well as their incorporation to microextraction techniques are reviewed from a green perspective and recent alternatives to make the use of molecularly imprinted polymers more sustainable are provided.

Review of LC techniques for determination of methadone and its metabolite in the biological samples

Methadone (MTD) is a synthetic analgesic drug used for treating opioid dependence and effectively used clinically for patients with severe pain. The abuse of MTD may lead to poisoning, disorder in the central nervous system and even death. The regular monitoring of MTD in biological matrices including serum, plasma and urine samples is an effective way to control abuse of MTD. In this manner, the selection of analytical monitoring of MTD in biological matrices is of paramount importance. This study was conducted to review high-performance liquid chromatography (HPLC) techniques carried out on MTD and its main metabolite 2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine (EDDP) in the biological samples during 2015-June 2021.

Application of Microextraction-Based Techniques for Screening-Controlled Drugs in Forensic Context-A Review

The analysis of controlled drugs in forensic matrices, i.e., urine, blood, plasma, saliva, and hair, is one of the current hot topics in the clinical and toxicological context. The use of microextraction-based approaches has gained considerable notoriety, mainly due to the great simplicity, cost-benefit, and environmental sustainability. For this reason, the application of these innovative techniques has become more relevant than ever in programs for monitoring priority substances such as the main illicit drugs, e.g., opioids, stimulants, cannabinoids, hallucinogens, dissociative drugs, and related compounds. The present contribution aims to make a comprehensive review on the state-of-the art advantages and future trends on the application of microextraction-based techniques for screening-controlled drugs in the forensic context.

Functionalized graphene oxide tablets for sample preparation of drugs in biological fluids: Extraction of ritonavir, a HIV protease inhibitor, from human saliva and plasma using LC-MS/MS

In this work, graphene oxide-based tablets (GO-Tabs) were prepared by applying a thin layer of functionalized GO on a polyethylene substrate. The GO was functionalized with amine groups (-NH₂ ) by poly(ethylene glycol)bis(3-aminopropyl) terminated (GO-NH₂ -PEG-NH₂ ). The functionalized GO-Tabs were used for the extraction of ritonavir (RTV) in human saliva samples. RTV in plasma and saliva samples was analyzed using LC-MS/MS. Gradient LC system with MS/MS in the positive-ion mode [electrospray ionization (ESI+)] was used. The transitions m/z 721 → 269.0 and m/z 614 → 421 were used for RTV and the internal standard indinavir, respectively. This study determined the human immunodeficiency virus protease inhibitor RTV in human saliva samples using functionalized GO-Tab and LC-MS/MS, and the method was validated. The standard calibration curve for plasma and saliva samples was constructed from 5.0 to 2000 nmol L^-1 . The limit of detection was 0.1 nmol L^-1 , and the limit of quantification was 5.0 nmol L^-1 in both plasma and saliva matrices. The intra- and inter-assay precision values were found to be between 1.5 and 5.8%, and the accuracy values ranged from 88.0 to 108% utilizing saliva and plasma samples. The extraction recovery was more than 80%, and the presented functionalized GO-Tabs could be reused for more than 10 extractions without deterioration in recovery.

Insights into the structure-performance relationships of extraction materials in sample preparation for chromatography

Sample preparation is one of the most crucial steps in analytical processes. Commonly used methods, including solid-phase extraction, dispersive solid-phase extraction, dispersive magnetic solid-phase extraction, and solid-phase microextraction, greatly depend on the extraction materials. In recent decades, a vast number of materials have been studied and used in sample preparation for chromatography. Due to the unique structural properties, extraction materials significantly improve the performance of extraction devices. Endowing extraction materials with suitable structural properties can shorten the pretreatment process and improve the extraction efficiency and selectivity. To understand the structure-performance relationships of extraction materials, this review systematically summarizes the structural properties, including the pore size, pore shape, pore volume, accessibility of active sites, specific surface area, functional groups and physicochemical properties. The mechanisms by which the structural properties influence the extraction performance are also elucidated in detail. Finally, three principles for the design and synthesis of extraction materials are summarized. This review can provide systematic guidelines for synthesizing extraction materials and preparing extraction devices.

An innovative highly sensitive electrochemical sensor based on modified electrode with carbon quantum dots and multiwall carbon nanotubes for determination of methadone hydrochloride in real samples

In the present work, to enhance the properties of a pencil graphite electrode (PGE), highly functionalized carbon quantum dots (CQDs) were synthesized and mixed with multiwall carbon nanotubes (MWCNTs) as novel modifiers for the preparation of working electrodes. These modifiers exhibited unique characteristics owing to the fascinating and well-defined properties of the CQD-MWCNT nanocomposite, including high surface to volume ratio, high conductivity, high stability and excellent electrocatalytic activity. Consequently, a modified pencil graphite electrode based on poly (diallyldimethylammonium chloride) (PDDA)/MWCNT/CQD was used to monitor the oxidation signals of methadone hydrochloride. Notably, field emission scanning electron microscopy (FE-SEM) was used to characterize the morphology and features of the different modifiers on the electrode surface. The proposed sensor was characterized via electrochemical studies including differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). Under the optimum experimental conditions, the current response and concentration of methadone exhibited a linear relationship in the range of 0.1-225 μM with a detection limit of 0.03 μM. Furthermore, this sensor was successfully applied to determine methadone in human urine and plasma samples.

Selective separation and purification of polydatin by molecularly imprinted polymers from the extract of Polygoni Cuspidati Rhizoma et Radix, rats' plasma and urine

Molecularly imprinted polymers (MIPs) based on polydatin were prepared by precipitation polymerization method. Synthesis process of MIPs was optimized by discussion of functional monomers, porogens and the molar ratio of template- functional monomer-cross linker. Then, MIPs were prepared with polydatin as the template, 4-vinyl pyridine as the functional monomer, ethylene glycol dimethyl acrylate as the cross linker, acetonitrile as the porogen and the molar ratio of template-monomer-cross linker at 1:10:20. Scanning electron microscopy and Fourier transform infrared spectrometer were used to inspect macroscale and chemical bond of MIPs. Adsorption capability and selectivity of MIPs to polydatin were investigated by carrying out the static, dynamic and selective experiments. The results showed MIPs performed high adsorption ability and selectivity to polydatin, indicating MIPs could be used to separate and enrich polydatin from the complex systems. Finally, MIPs were applied as the adsorbent for isolation and purification of polydatin from the extract of Polygoni Cuspidati Rhizoma et Radix, rats' plasma and urine samples. MIPs were successfully used to separate polydatin from the Polygoni Cuspidati Rhizoma et Radix and recovery ranged from 89.2% to 91.6%. The maximum concentration of polydatin in rats' plasma and urine samples was 2.84 ± 0.0748 µg mL^-1 and 2.64 ± 0.485 µg mL^-1, respectively. Moreover, to compare with the MIPs method, organic solvent methods were used to analyze the polydatin in rats' plasma and urine samples. The results illustrated MIPs method was effective and selective for enrichment of polydatin from the medicinal plants and biological samples.

Application of molecularly imprinted polymers in the anti-doping field: sample purification and compound analysis

The problem posed by anti-doping requirements is one of the great analytical challenges; multiple compound detection at low ng ml-1 levels from complex samples, with requirements for exceptional confidence in results. This review surveys the design, synthesis and application of molecularly imprinted polymers (MIPs) in this field, focusing on the templating of androgenous anabolic steroids (AASs), as the most commonly abused substances, but also other WADA prohibited substances. Commentary on the application of these materials in detection, clean-up and sensing is offered, alongside views on the future of imprinting in this field.

Microextraction approaches for bioanalytical applications: An overview

Biological samples are usually complex matrices due to the presence of proteins, salts and a variety of organic compounds with chemical properties similar to those of the target analytes. Therefore, sample preparation is often mandatory in order to isolate the analytes from troublesome matrices before instrumental analysis. Because the number of samples in drug development, doping analysis, forensic science, toxicological analysis, and preclinical and clinical assays is steadily increasing, novel high throughput sample preparation approaches are calling for. The key factors in this development are the miniaturization and the automation of the sample preparation approaches so as to cope with most of the twelve principles of green chemistry. In this review, recent trends in sample preparation and novel strategies will be discussed in detail with particular focus on sorptive and liquid-phase microextraction in bioanalysis. The actual applicability of selective sorbents is also considered. Additionally, the role of 3D printing in microextraction for bioanalytical methods will be pinpointed.

Recent Applications of Molecularly Imprinted Sol-Gel Methodology in Sample Preparation

Due to their selectivity and chemical stability, molecularly imprinted polymers have attracted great interest in sample preparation. Imprinted polymers have been applied for the extraction and the enrichment of different sorts of trace analytes in biological and environmental samples before their analysis. Additionally, MIPs are utilized in various sample preparation techniques such as SPE, SPME, SBSE and MEPS. Nevertheless, molecularly imprinted polymers suffer from thermal (stable only up to 150 °C) and mechanical stability issues, improper porosity and poor capacity. The sol-gel methodology as a promising alternative to address these limitations allowing the production of sorbents with controlled porosity and higher surface area. Thus the combination of molecularly imprinted technology and sol-gel technology can create influential materials with high selectivity, high capacity and high thermal stability. This work aims to present an overview of molecularly imprinted sol-gel polymerization methods and their applications in analytical and bioanalytical fields.

Graphene Oxide Tablets for Sample Preparation of Drugs in Biological Fluids: Determination of Omeprazole in Human Saliva for Liquid Chromatography Tandem Mass Spectrometry

In this study, a novel sort of sample preparation sorbent was developed, by preparing thin layer graphene oxide tablets (GO-Tabs) utilizing a mixture of graphene oxide and polyethylene glycol on a polyethylene substrate. The GO-Tabs were used for extraction and concentration of omeprazole (OME) in human saliva samples. The determination of OME was carried out using liquid chromatography-tandem mass spectrometry (LC–MS/MS) under gradient LC conditions and in the positive ion mode (ESI+) with mass transitions of m/z 346.3→198.0 for OME and m/z 369.98→252.0 for the internal standard. Standard calibration for the saliva samples was in the range of 2.0–2000 nmol L⁻¹. Limits of detection and quantification were 0.05 and 2.0 nmol L⁻¹, respectively. Method validation showed good method accuracy and precision; the inter-day precision values ranged from 5.7 to 8.3 (%RSD), and the accuracy of determinations varied from −11.8% to 13.3% (% deviation from nominal values). The extraction recovery was 60%, and GO-Tabs could be re-used for more than ten extractions without deterioration in recovery. In this study, the determination of OME in real human saliva samples using GO-Tab extraction was validated.

Molecularly imprinted polymer-sol-gel tablet toward micro-solid phase extraction: II. Determination of amphetamine in human urine samples by liquid chromatography-tandem mass spectrometry

Amphetamine selective molecularly imprinted sol-gel polymer tablets, MIP-tablets, for solid-phase microextraction of biofluid samples were prepared. An acetonitrile solution of deuterated amphetamine template and silane precursor, 3-(propylmethacrylate) trimethoxysilane, was soaked into the pores of polyethylene tablet substrates and polymerized by an acid-catalysed sol-gel process. Application of the resultant MIP-tablets to extract amphetamine from human urine samples followed by LC-MS/MS analysis was investigated. The extraction protocol was optimised with respect to pH of sample, addition of sodium chloride, extraction time, desorption solvent and desorption time. The final analysis method determined amphetamine in human urine with a limit of detection (LOD) of 1.0ng/mL and a lower limit of quantification (LLOQ) of 5ng/mL. Validation demonstrated accuracy of the method was 91.0-104.0% and inter-assay precision was 4.8-8.5% (RSD). Extraction recovery was 80%. The MIP-tablets could be re-used and the same tablet could be employed for more than twenty extractions.