Small molecular probe as selective tritopic sensor of Al3+, F- and TNP: Fabrication of portable prototype for onsite detection of explosive TNP

Colorimetric chemosensors for the selective detection of arsenite over arsenate anions in aqueous medium: Application in environmental water samples and DFT studies

Novel organic receptors N3R1- N3R3 were developed for the selective colorimetric recognition of arsenite ions in the organo-aqueous media. In the 50% aq. acetonitrile media and 70% aq. DMSO media, receptors N3R2 and N3R3 showed specific sensitivity and selectivity towards arsenite anions over arsenate anions. Receptor N3R1 showed discriminating recognition of arsenite in the 40% aq. DMSO medium. All three receptors formed a 1:1 complex with arsenite and stable for a pH range of 6-12. The receptors N3R2 and N3R3 achieved a detection limit of 0.008 ppm (8 ppb) and 0.0246 ppm, respectively, for arsenite. Initial hydrogen bonding on binding with the arsenite followed by the deprotonation mechanism was well supported by the UV-Vis titration, ¹H- NMR titration, electrochemical studies, and the DFT studies. Colorimetric test strips were fabricated using N3R1- N3R3 for the on-site detection of arsenite anion. The receptors are also employed for sensing arsenite ions in various environmental water samples with high accuracy.

Synthesis of samarium orthoferrite-based perovskite nanoparticles as a turn-on fluorescent probe for trace level detection of picric acid

Picric acid (2,4,6-trinitrophenol, PA) is a common constituent of many powerful explosives, thus, development of the chemical probes for trace level detection of PA is a crucial current challenge in both public security and environmental protection. In this work, the applicability of the new perovskite-type oxide SmFeO₃ nanoparticles as an inorganic fluorescence turn-on probe for the selective and sensitive recognition of PA in organic and aqueous media was investigated. The synthesis of nanoparticles SmFeO₃ was carried out using the surfactant-assisted templating approach which proceeds through the sol-gel process based on nonionic surfactant Triton X-100. The synthesized SmFeO₃ nanoparticles exhibited strong solvent-dependent emission at 330 nm wavelength with absorption maxima at 225 nm. Among the tested explosives, the probe showed the highest sensitivity and selectivity for detecting PA in water and water/acetonitrile mixture. The response time for detecting PA was less than 5 s. The limits of detection for PA in acetonitrile and water/acetonitrile mixture were 2.1 µM and 1.1 µM, respectively. Furthermore, to investigate the nature of the fluorescence turn-on sensing mechanism, the experimental data of the dynamic light scattering (DLS) technique and zeta-potential were used. Both techniques confirmed the aggregation-induced emission (AIE) mechanism for detection of PA with the synthesized turn-on probe. The results of the present work will have a considerable impact on the development and applications of a new class of inorganic fluorescence turn-on probes for the detection of PA.

Knoevenagel condensation triggered synthesis of dual-channel oxene based chemosensor: Discriminative spectrophotometric recognition of F-, CN- and HSO4- with breast cancer cell imaging, real sample analysis and molecular keypad lock applications

A novel oxene based unusual sensory receptor (HyMa) has been synthesized via.Knoevenagel condensation triggered carbon-heteroatom (oxygen) intramolecular bond formation reaction at room temperature for discriminative detection of multi-analytes like HSO₄^-, CN^- & F^- by spectro-photometric alterations with profound selectivity with the detection limit of 38 ppb, 18 ppb & 94 ppb respectively. Examination of the sensing mechanism was exhaustively investigated through several spectroscopic means like ¹H NMR, FT-IR, absorption and fluorescence spectra etc. In addition, quantum mechanical calculations like DFT and Loewdin spin population analyses also validated the rationality of the host-guest interaction. Apart from these, the reversible spectroscopic responses of HyMa towards F^- and Al³⁺ can imitate several complex logic functions that in turn help in preparing molecular keypad lock. This molecular keypad lock has the potential to protect the confidential information at the molecular scale. Additionally, the MTT assay of HyMa showed low cytotoxicity and membrane permeability indicating its attractive capability for bio-imaging towards triple negative breast cancer. HyMa-coated test strips could also be employed towards on-site detection of these deadly contaminants via "Dip Stick" approach without help of any instrumentation. In addition, HyMa has also been exploited for quantitative determination of HSO₄^- from various real water samples. In a nutshell, detection of lethal contaminants like CN^-, F^- & HSO₄^- at ppb level with in vitro live cell imaging has been explored with proper photophysical characterisation and theoretical calculations with real field applications.

18α-Glycyrrhetinic acid aggregation-induced emission probes for visual fluorescence detection of explosive as well multi-functional applications

Two novel compounds with good AIE properties were synthesized. As fluorescent probes, these compounds could effectively and quickly detect the explosive FOX-7.

Tetraphenylethylene-vitamin E Conjugates as sensitive aggregation-induced emission probes for selective detection of explosive FOX-7

With the increasingly severe international security situation, the application of explosives is more and more extensive, and the probes that can detect the explosives quickly and efficiently have attracted people's attention. In this work, two novel probes T₁ and T₂ were synthesized through vitamin E succinate and tetraphenylethylene derivative. Fluorescence spectra showed that both T₁ and T₂ had a typical aggregation-induced emission (AIE) effect in THF/H₂O solution, and explosive FOX-7 could effectively quench this fluorescence without being affected by other explosives or ions. The filter paper and cotton rods prepared with these two probes could detect FOX-7 specifically, which also provided the possibility for practical application on the battlefield.

Coumarin functionalized molecular scaffolds for the effectual detection of hazardous fluoride and cyanide

Fluoride and cyanide contamination in drinking water imposes detrimental impacts on human health above their permissible limits. Hence, the quantitative detection of these colourless water-soluble toxins has attracted attention. Even though a plethora of chemosensors have been reported so far for the detection of fluoride and cyanide from various matrices, still their applicability is limited to a few examples. Nevertheless, recent advances in the syntheses of coumarin derivatives have shown significant impact on fluoride and cyanide detection. Therefore, this present review provides a brief overview of the application of coumarin-coupled molecular scaffolds towards the detection of perilous fluoride and cyanide along with their sensing mechanisms in order to develop more innovative, simple, sensitive, real-time responsive and cost-effective coumarin-based supramolecular chemosensors to promote next generation approaches towards the ultra-trace quantitative detection of these toxic anions.

Interpol review of detection and characterization of explosives and explosives residues 2016-2019

This review paper covers the forensic-relevant literature for the analysis and detection of explosives and explosives residues from 2016-2019 as a part of the 19th Interpol International Forensic Science Managers Symposium. The review papers are also available at the Interpol website at: https://www.interpol.int/Resources/Documents#Publications.

Detection of toxic fluoride ion via chromogenic and fluorogenic sensing. A comprehensive review of the year 2015-2019

Fluoride ion (F^-) contamination can be accumulated along the water and the food chain and cause serious risk to public health. It is of the greatest importance that selects the suitable chromophores and fluorophores for the design and synthesis of outstanding selective, sensitive chromogenic and fluorogenic probes for detection of fluoride ion. In this review is mainly focused on the current progress of fluoride ion detection according to their receptors into several categories like anthracene, azo, benzothiazole, BODIPY, calixarene, coumarin, imidazole, diketopyrrolopyrrole, hydrazone, imidazole, naphthalene, naphthalimide, quantum dots, Schiff base and urea group sensing in the year 2015-2019.

A stilbazolium dye-based chromogenic and red-fluorescent probe for recognition of 2,4,6-trinitrophenol in water

Probe DMAS-DP in water shows highly selective decrease in absorbance (475 nm) and fluorescence intensity (615 nm) with 2,4,6-trinitrophenol and colour change from red to yellow (visible light) and red fluorescent to black (365 nm light).

Anion-Induced Structural Diversity of Zn and Cd Coordination Polymers Based on Bis-9,10-(pyridine-4-yl)-anthracene, Their Luminescent Properties, and Highly Efficient Sensing of Nitro Derivatives and Herbicides

Luminescent coordination polymers (CPs) of Zn²⁺ or Cd²⁺ and bis-9,10-(pyridine-4-yl)-anthracene (BA) show different 1D and 2D topologies depending on the anion used in the precursor. Compounds {[Zn(μ₂-BA)(MeOH)₂(p-Tos)₂]} _n (1) and {[Zn(μ₂-BA)(MeOH)₂(CF₃CO₂)₂]} _n (2) form linear structures and {BA@[Zn(μ₂-BA)(MeOH)₂(H₂O)₂](CF₃SO₃)₂} _n (3) featuring intercalation of uncoordinated BA molecules into linear ribbons. Cd-based CPs {[Cd(μ₂-BA)₂(ClO₄)₂]· n(DCM)} _n (4) and {[Cd(μ₂-BA)(MeOH)₂(Dioxane)(η₂-SiF₆)]·mDioxane} _n (5) form porous structures with 2D lattices. All complexes exhibit strong blue emission in the solid state with average lifetimes between 8 and 13 ns. The emission of compound 4 is sensitive to the presence of nitro aromatics, simazine, and trichloroanisole (TCA) and demonstrates nonlinear Stern-Volmer quenching kinetics. Limits of detection (LOD) of 15 and 16 ppb for picric acid and TCA were achieved, respectively.

A simple urea-based multianalyte and multichannel chemosensor for the selective detection of F−, Hg2+ and Cu2+ in solution and cells and the extraction of Hg2+ and Cu2+ from real water sources: a logic gate mimic ensemble

Herein, a hydrazine-based chromogenic, fluorogenic and electrochemical chemosensor BCC [1,5-bis(4-cyanophenyl) carbonohydrazide] was reported.

Toxic organic solvent adsorption by a hydrophobic covalent polymer

A hydrophobic needle-shaped novel covalent polymer has been synthesized at ambient temperature for adsorption of toxic organics.

A Journey towards Salivary Fluoride Level Detection by Suitable Low Cost Chemosensor: From Molecule to Product

Fluoride is a ubiquitous anion and essential for us owing to its ability to protect human body from several health related issues. The safe limit of Fluoride ion for human body is 1.5 ppm, above it the ion becomes toxic and can cause dental-skeletal fluorosis or urolithiasis. Several countries are facing such health hazard owing to the naturally abundant excess fluoride in ground water. As a consequence, habitants of such fluoride enriched zone needs to monitor the concentration of fluoride in their body by periodic analysis. In this regard, development of a chemosensor which can detect fluoride from human body fluid at easy-instant-economic way is an obvious mandate. For the first time, our group has developed a sensor kit and sensor station device as a deliverable product for individual and batch scale detection of salivary fluoride level by colorimetric method. The sensor station is the first device made by interfacing chemical output with electronics and the encrypted signal in digital version could be used as a level of fluoride in saliva. Our journey towards the development of suitable chemosensor for recognition of fluoride from human body fluid is summarized in this account.

A Highly Selective Fluorescent Chemosensor for Detecting Indium(III) with a Low Detection Limit and its Application

A highly selective chemosensor BHC ((E)-N-benzhydryl-2-((2-hydroxynaphthalen-1-yl)methylene)hydrazine-1-carbothioamide) for detecting indium(III) was synthesized. Sensor BHC can detect In(III) by a fluorescence turn-on method. The detection limit was analyzed to be 0.89 μM. Importantly, this value is the lowest among those previously known for fluorescent turn-on In(III) chemosensors. Based on the analytical methods like ESI-mass, Job plot, and theoretical calculations, the detection mechanism for In(III) was illustrated to be chelation-enhanced fluorescence (CHEF) effect. Additionally, sensor BHC was successfully applied to test strips.

A dual spectroscopic fluorescence probe based on carbon dots for detection of 2,4,6-trinitrophenol/Fe (III) ion by fluorescence and frequency doubling scattering spectra and its analytical applications

A convenient, highly sensitive and reliable assay for 2,4,6‑trinitrophenol (TNP) and Fe (III) ion (Fe³⁺) in the dual spectroscopic manner is developed based on novel carbon dots (CDs). The CDs with highly blue emitting fluorescent were easily prepared via the one-step potassium hydroxide-assisted reflux method from dextrin. The as-synthesized CDs exhibited the high crystalline quality, the excellent fluorescence characteristics with a high quantum yield of ~13.1%, and the narrow size distribution with an average diameter of 6.3±0.5nm. Fluorescence and frequency doubling scattering (FDS) spectra of CDs show the unique changes in the presence of TNP/Fe³⁺ by different mechanism. The fluorescence of CDs decreased apparently in the presence of TNP via electron-transfer. Thus, after the experimental conditions were optimized, the linear range for detection TNP is 0-50μM, the detection limit was 19.1nM. With the addition of Fe³⁺, the FDS of CDs appeared to be highly sensitive with a quick response to Fe³⁺ as a result of the change concentration of the scattering particle. The emission peak for FDS at 450nm was enhanced under the excitation wavelength at 900nm. The fluorescence response changes linearly with Fe³⁺ concentration in the range of 8-40μM, the detection limits were determined to be 44.1nM. The applications of CDs were extended for the detection of TNP, Fe³⁺ in real water samples with a high recovery. The results reported here may become the potential tools for the fast response of TNP and Fe³⁺ in the analysis of environmental pollutants.

A multifunctional two-photon fluorescent probe for detecting H2S in wastewater and GSH in vivo

A novel turn-on fluorescent probe, which coumarin-fused coumarin was used as fluorophore to link with 2, 4- dinitrodiphenyl ether moiety that has high selectivity and sensitivity for H₂S and thiols, was designed and synthesized. Our probe YB can sensitively react with H₂S and GSH to release free fluorophore with strong fluorescence signals. The probe YB could use as a significant molecular imaging tool to study the endogenous GSH in living cell and a practical detector for H₂S in the papermaking wastewater.

A novel dicyanoisophorone based red-emitting fluorescent probe with a large Stokes shift for detection of hydrazine in solution and living cells

A novel dicyanoisophorone based fluorescent probe HP was developed to detect hydrazine. Upon the addition of hydrazine, probe HP displayed turn-on fluorescence in the red region with a large Stokes shift (180nm). This probe exhibited high selectivity and high sensitivity to hydrazine in solution. The detection limit of HP was found to be 3.26ppb, which was lower than the threshold limit value set by USEPA (10ppb). Moreover, the probe was successfully applied to detect hydrazine in different water samples and living cells.

A highly sensitive and rapidly responding fluorescent probe based on a rhodol fluorophore for imaging endogenous hypochlorite in living mice

Hypochlorous (HOCl) acid is generated as a defense tool in the immune system and plays a vital role in killing a wide range of pathogens. There is therefore great interest in developing fluorescent probes that can endogenously respond to the change in concentration of HOCl in vivo. To address this challenge, we here present a rapidly responding fluorescent probe RO610 to image endogenous HOCl in living mice. The development of RO610 was based on a novel water-soluble and pH-independent fluorescent xanthene dye, 2'-formylrhodol ROA, which exhibits highly selective and sensitive responses to HOCl/ClO^- over other reactive species. Moreover, adding a little more than 5 equiv. of ClO^- to the solution of RO610 resulted in a clearly observable fluorescence enhancement (48-fold) within 30 s. Based on these properties, RO610 was used to detect ClO^- in A549 cells without interference by other oxidants. It was applied for the imaging of endogenous HOCl in living nude mice with satisfactory results.

A quinoline-based compound for explosive 2,4,6-trinitrophenol sensing: experimental and DFT-D3 studies

A quinoline-based compound, 2,5-dimethylbis(quinolin-2-ylmethylene)benzene-1,4-diamine (DQB), has been found to be a turn-off chemosensor for 2,4,6-trinitrophenol.

A pyrene-benzimidazole composed effective fluoride sensor: potential mimicking of a Boolean logic gate

A highly selective fluoride sensor based on a pyrene benzimidazole unit was developed and studied for recyclable memory function.

Nanomolar-level selective dual channel sensing of Cu2+and CN−from an aqueous medium by an opto-electronic chemoreceptor

A novel chromogenic and fluorogenic chemoreceptor exhibiting a proclivity towards Cu²⁺and CN⁻, with applications in bioimaging and molecular electronics, was developed.

A long-persistent phosphorescent chemosensor for the detection of TNP based on CaTiO3:Pr3+@SiO2 photoluminescence materials

An effective and facile phosphorescence sensing approach was developed for 2,4,6-trinitrophenol (TNP) detection using CaTiO₃:Pr³⁺@SiO₂ photoluminescence materials.

Defects regulating of graphene ink for electrochemical determination of ascorbic acid, dopamine and uric acid

A simple water immersing treatment has been established for regulating the electrocatalytic activity of commercial graphene ink. This process enables to remove additives in graphene ink and consequently expose the surface defects. A graphene ink coated glass has been fabricated as an example platform for simultaneous determination of ascorbic acid (AA), dopamine (DA), and uric acid (UA). Cyclic voltammetry studied indicated electrocatalytic reaction can be initiated after the additives leaching during the water immersing treatment. Under optimal conditions, the linear calibration curves were achieved in the range of 50-1000, 3-140, and 0.5-150μM, with detection limits of 17.8, 1.44 and 0.29μM for AA, DA, and UA, respectively. This work demonstrated that the removal of additives of the graphene ink after film coating could be applied as a simple and cost-effective electrochemical platform for sensing application.

A Highly Selective Naphthalimide-Based Chemosensor: "Naked-Eye" Colorimetric and Fluorescent Turn-On Recognition of Al3+ and Its Application in Practical Samples, Test Paper and Logic Gate

A novel naphthalimide-based colorimetric and fluorescent turn-on chemosensor for Al³⁺ was synthesized and characterized with spectroscopic techniques. In MeOH solution, BPAM showed high selectivity and sensitivity to Al³⁺ by a 60-fold fluorescence enhancement and blue-shift absorption with visible color changes attributed to the contribution of chelation enhanced fluorescence (CHEF) and inhibition of intramolecular charge transfer (ICT). A 1:1 BPAM-Al³⁺ complex confirmed by job's plot and HRMS with a binding constant of 6.37 × 10⁴ M^- 1, and the detection limit for Al³⁺ was as low as 1.59 × 10^- 7 M. BPAM was successfully applied in real sample detection and assessing the existence of Al³⁺ by a colorimetric method on filter paper. Furthermore, the fluorescent signals of BPAM were designed to construct an INHIBIT molecular logic gate.