Rapid multiplex DNA amplification on an inexpensive microdevice for human identification via short tandem repeat analysis

Modified differential lysis for sexual assault samples using a combined enzymatic and alkaline approach

Sexual assault sample processing, despite recent funding and research efforts, remains time-consuming, labourious, and inefficient. These limitations, combined with the prevalence of sexual assaults, have prompted the need to develop a cheaper, quicker, and more robust method for separating victim and perpetrator contributions within sexual assault evidence so that analysts can keep pace with submissions and cases can be resolved in a timely manner. Thus, this study examined the use of a combined enzymatic and alkaline approach for differential cell lysis-with the goal of developing a quick, cheap, and more efficient DNA isolation method. Quantification results for this assay revealed that (72.0 ± 18.3)%, (15.8 ± 14.2)%, and (29.5 ±  23.7)% of total DNA were retained in sperm fractions for neat semen, neat vaginal, and semen-vaginal mixture eluates, respectively. Short tandem repeat (STR) analysis of mixture samples processed with this technique exhibited sperm fraction DNA profiles with mean male-to-female ratios of 1.74:1, which was a 3.01 ± 2.30-fold improvement in male-to-female ratios and led to the recovery of 5.90 ± 7.80 unshared male contributor alleles in sperm fractions that were otherwise undetected in unseparated controls. Overall, this study presented a modified differential lysis approach using prepGEM™ and sodium hydroxide treatments that can accomplish cell elution and fractional lysis within 25 min. Future studies should investigate alternative "non-sperm" cell lysis methods to enhance lysis efficiency and minimize the potential for inhibition, as well as the optimization and automation of this technique.

Key points

Traditional sexual assault sample processing methods are time-consuming and inefficient.This modified differential lysis method produces lysates with sufficient DNA yield and quality.A combined technique using enzymatic and alkaline lysis can accomplish fractional separation.Lysis with prepGEM and NaOH absent purification is compatible with downstream processes.

Application of microfluidic technologies in forensic analysis

The application of microfluidic technology in forensic medicine has steadily expanded over the last two decades due to the favorable features of low cost, rapidity, high throughput, user-friendliness, contamination-free, and minimum sample and reagent consumption. In this context, bibliometric methods were adopted to visualize the literature information contained in the Science Citation Index Expanded from 1989 to 2022, focusing on the co-occurrence analysis of forensic and microfluidic topics. A deep interpretation of the literature was conducted based on co-occurrence results, in which microfluidic technologies and their applications in forensic medicine, particularly forensic genetics, were elaborated. The purpose of this review is to provide an impartial evaluation of the utilization of microfluidic technology in forensic medicine. Additionally, the challenges and future trends of implementing microfluidic technology in forensic genetics are also addressed.

On the Application of Microfluidic-Based Technologies in Forensics: A Review

Microfluidic technology is a powerful tool to enable the rapid, accurate, and on-site analysis of forensically relevant evidence on a crime scene. This review paper provides a summary on the application of this technology in various forensic investigation fields spanning from forensic serology and human identification to discriminating and analyzing diverse classes of drugs and explosives. Each aspect is further explained by providing a short summary on general forensic workflow and investigations for body fluid identification as well as through the analysis of drugs and explosives. Microfluidic technology, including fabrication methodologies, materials, and working modules, are touched upon. Finally, the current shortcomings on the implementation of the microfluidic technology in the forensic field are discussed along with the future perspectives.

Rapid Microchip Electrophoretic Separation of Novel Transcriptomic Body Fluid Markers for Forensic Fluid Profiling

Initial screening of criminal evidence often involves serological testing of stains of unknown composition and/or origin discovered at a crime scene to determine the tissue of origin. This testing is presumptive but critical for contextualizing the scene. Here, we describe a microfluidic approach for body fluid profiling via fluorescent electrophoretic separation of a published mRNA panel that provides unparalleled specificity and sensitivity. This centrifugal microfluidic approach expedites and automates the electrophoresis process by allowing for simple, rotationally driven flow and polymer loading through a 5 cm separation channel; with each disc containing three identical domains, multi-sample analysis is possible with a single disc and multi-sample detection per disc. The centrifugal platform enables a series of sequential unit operations (metering, mixing, aliquoting, heating, storage) to execute automated electrophoretic separation. Results show on-disc fluorescent detection and sizing of amplicons to perform comparably with a commercial 'gold standard' benchtop instrument and permitted sensitive, empirical discrimination between five distinct body fluids in less than 10 min. Notably, our microfluidic platform represents a faster, simpler method for separation of a transcriptomic panel to be used for forensically relevant body fluid identification.

Determination of Advantages and Limitations of qPCR Duplexing in a Single Fluorescent Channel

Real-time (quantitative) polymerase chain reaction (qPCR) has been widely applied in molecular diagnostics due to its immense sensitivity and specificity. qPCR multiplexing, based either on fluorescent probes or intercalating dyes, greatly expanded PCR capability due to the concurrent amplification of several deoxyribonucleic acid sequences. However, probe-based multiplexing requires multiple fluorescent channels, while intercalating dye-based multiplexing needs primers to be designed for amplicons having different melting temperatures. Here, we report a single fluorescent channel-based qPCR duplexing method on a model containing the sequence of chromosomes 21 (Chr21) and 18 (Chr18). We combined nonspecific intercalating dye EvaGreen with a 6-carboxyfluorescein (FAM) probe specific to either Chr21 or Chr18. The copy number (cn) of the target linked to the FAM probe could be determined in the entire tested range from the denaturation curve, while the cn of the other one was determined from the difference between the denaturation and elongation curves. We recorded the amplitude of fluorescence at the end of denaturation and elongation steps, thus getting statistical data set to determine the limit of the proposed method in detail in terms of detectable concentration ratios of both targets. The proposed method eliminated the fluorescence overspilling that happened in probe-based qPCR multiplexing and determined the specificity of the PCR product via melting curve analysis. Additionally, we performed and verified our method using a commercial thermal cycler instead of a self-developed system, making it more generally applicable for researchers. This quantitative single-channel duplexing method is an economical substitute for a conventional rather expensive probe-based qPCR requiring different color probes and hardware capable of processing these fluorescent signals.

The effects of dithiothreitol (DTT) on fluorescent qPCR dyes

DNA extractions of semen samples commonly utilize dithiothreitol (DTT) to reduce and disrupt disulfide bonds. Although traditional extraction techniques remove DTT before downstream analyses, the forensic DNA community has recently explored Y-screening, direct amplification, and direct cell lysis assays that omit purification but employ reducing agents to lyse spermatozoa. This study examined the impact of residual DTT on downstream processes involving fluorescent dyes. Quantification using Investigator^® Quantiplex HYres revealed a significant increase in the male DNA yield (p = 0.00056) and a >150,000,000-fold increase in the male:human DNA ratio when DTT remained in extracts versus when it was filtered out using a traditional purification method. When DTT was present with Quantifiler™ Trio, the true mean DNA yield for the large autosomal target significantly increased (p = 0.038) and the average reported DNA yields increased 1.1-fold, >9.5-fold, and 1.3-fold for the small autosomal, large autosomal, and male targets, respectively. DTT-spiked DNA standards from both kits were impacted similarly to samples with residual DTT, demonstrating that observed effects were related to DTT and not the extraction method. This study corroborates other reports that DTT adversely affects multiple dyes (e.g., Cy5, Quasar 670, SYBR Green I, TMR, and Mustang Purple^® ). Overall, DTT causes inaccurate quantities and, consequently, inaccurate calculated male:female ratios when used in conjunction with these kits. Thus, implementation of newer direct-to-PCR assays incorporating DTT should either be avoided or used only with carefully evaluated, compatible dyes.

Recent Advances and Applications of Microfluidic Capillary Electrophoresis: A Comprehensive Review (2017-Mid 2019)

Microfluidic capillary electrophoresis (MCE) is the novel technique resulted from the CE mininaturization as planar separation and analysis device. This review presents and discusses various application fields of this advanced technology published in the period 2017 till mid-2019 in eight different sections including clinical, biological, single cell analysis, environmental, pharmaceuticals, food analysis, forensic and ion analysis. The need for miniaturization of CE and the consequence advantages achieved are also discussed including high-throughput, miniaturized detection, effective separation, portability and the need for micro- or even nano-volume of samples. Comprehensive tables for the MCE applications in the different studied fields are provided. Also, figure comparing the number of the published papers applying MCE in the eight discussed fields within the studied period is included. The future investigation should put into consideration the possibility of replacing conventional CE with the MCE after proper validation. Suitable validation parameters with their suitable accepted ranges should be tailored for analysis methods utilizing such unique technique (MCE).

Automated microchannel alignment using innate opto-signature for microchip electrophoresis

In laser-induced fluorescence (LIF) detection, optimal alignment is essential in maximizing the fluorescent signal and, hence, detection sensitivity. Micro-total analysis systems (μTAS) involving microchip electrophoresis (ME) are challenged with alignment of the optics to the separation channel each run due to the single-use nature. Furthermore, μTAS devices that are designed to operate autonomously and by non-experts face additional challenges in performing alignment with micrometer resolution without human intervention. As part of the development of a total DNA analysis system, we set out to develop an automated alignment (AA) method to locate a 50-by-50 μm separation channel on a freely rotating microfluidic device in the absence of a fluorescent dye, accomplished without additional hardware. We detail the innate fluorescent signature attainable from laser excitation and the optimization of the algorithm to achieve AA at 84.6% success rate from 26 microchips. This AA method was a key element in realizing complete automation of the DNA analysis process in order to advance our instrument to a technology readiness level of 7. This is the first description of an AA method for ME (and centrifugal ME) with the purpose of providing transparent technical details to bridge the gap from 'fully integrated' to 'fully automated' instruments for point-of-detection, sample in-answer-out use cases. Written in the context of a forensic application, the AA method is adaptable for a wide range of bioanalytical applications involving LIF detection.

A Fluorescence Sensing Method with Reduced DNA Typing and Low-Cost Instrumentation for Detection of Sample Tampering Cases in Urinalysis

This work presents a method to unequivocally detect urine sample tampering in cases where integrity of the sample needs to be verified prior to urinalysis. The technique involves the detection of distinct patterns of a triplex short tandem repeats system in DNA extracted from human urine. The analysis is realized with single-dye fluorescence detection and using a regular smartphone camera. The experimental results had demonstrated the efficacy of the analytical approach to obtaining distinct profiles of amplicons in urine from different sample providers. Reproducibility tests with fresh and stored urine have revealed a maximum variation in the profiles within an interval of 5 to 9%. Cases of urine sample tampering via mixture were simulated in the study, and the experiments have identified patterns of mixed genotypes from dual mixtures of urine samples. Moreover, sample adulteration by mixing a non-human fluid with urine in a volume ratio over 25% can be detected. The low cost of the approach is accompanied by the compatibility of the technique to use with different DNA sample preparation protocols and PCR instrumentation. Furthermore, the possibility of realizing the method in an integrated microchip system open great perspectives to conducting sample integrity tests at the site of urine sample reception and/or at resource-limited settings.

Specific PCR method for detection of species origin in biochemical drugs via primers for the ATPase 8 gene by electrophoresis

A PCR method is described to identify the species origin of various animal and human tissue-derived biochemical drugs. Four commercialized drugs, including spermary tablets, compound embryonic bovine liver extract tablets, spleen aminopeptide solution, and placenta polypeptide injection, were used as a proof-of-principle in this study. Primers were designed to amplify conservative regions of mitochondrial cytochrome b and ATPase 8 genes from beef, pork, lamb and human DNA, respectively. The specificity of primers for ATPase 8 gene is found to be higher than those for cytochrome b under the given experimental conditions. The amplicon sizes of ATPase 8 were 212, 271, 293 and 405 bp for pork, beef, lamb and human tissue, respectively. The minimum detectable concentration of DNA sample for species identification is 0.05-0.5 pg·μL^-1. The species origin can be distinguished by this method in extremely low concentrations of template DNAs extracted. Conceivably, this PCR method for meat authentication may be extended to quality control of other biochemical drugs and raw materials. Graphical abstract A specific PCR method was developed for the detection of species origin in biochemical drugs via species-specific primers targeting mitochondrial ATPase 8 genes. The PCR products were separated by gel electrophoresis and species origins were indicated by comparison to references.

Advancement of analytical modes in a multichannel, microfluidic droplet-based sample chopper employing phase-locked detection

In this work, we expand upon our recently developed droplet-based sample chopping concepts by introducing a multiplexed fluidic micro-chopper device (μChopper). Six aqueous input channels were integrated with a single oil input, and each of these seven channels was controlled by a pneumatic valve for automated sampling through software control. This improved design, while maintaining high precision in valve-based droplet generation at bandwidths of 0.03 to 0.05 Hz, enabled a variety of analytical modes to be employed on-chip compared to previous devices limited to sample/reference alternations. The device was analytically validated for real-time, continuous calibration with a single sample and five standards; multiplexed analysis during calibration using a mixed mode; and standard addition through spiking of six sample droplets with varying amounts of standard. Finally, the standard addition mode was applied to protein quantification in human serum samples using on-chip, homogeneous fluorescence immunoassays. Ultimately, with only ~1.2 μL of total analyzed solution volume- representing 100-fold and 75-fold reductions in reagent and serum volumes, respectively-we were able to generate full, six-point standard addition curves in only 1.5 min, and results correlated well with those from standard plate-reader equipment. This work thus exploited microfluidic valves for both their automation and droplet phase-locking capabilities, resulting in a micro-analytical tool capable of complex analytical interrogation modes on sub-microliter sample volumes while also leveraging drastic noise rejection via lock-in detection. The multichannel μChopper device should prove particularly useful in analyzing precious biological samples or for dynamic analyses at small volume scales.