Fluorescent quenching immune chromatographic strips with quantum dots and upconversion nanoparticles as fluorescent donors for visual detection of sulfaquinoxaline in foods of animal origin

Colorimetric and Reverse Fluorescence Dual-Signal Readout Immunochromatographic Assay for the Sensitive Determination of Sibutramine

Later flow immunochromatographic assay has been widely used in clinical, environmental, and other diagnostic applications owing to its high sensitivity and throughput. However, most immunoassays operate in the "turn-off" mode for detecting targets of low molecular weight. The signal intensity decreases as the analyte concentration increases, which poses a challenge for achieving ultrasensitive detection at low concentrations and is counterintuitive to new users. In this work, a fluorometric immunochromatographic assay (FICA) is developed to simultaneously read "turn-on" fluorescent and "turn-off" colorimetric signals, where ZnCdSe/ZnS quantum dots act as fluorescence donors and gold nanoparticles (AuNPs) act as quenchers. The fluorescent signal (excitation/emission wavelengths of 365/525 nm) is positively correlated with analytes' concentration. Taking sibutramine (SBT) as the analysis target, the visual limit of detection for SBT reached 3.9 ng/mL, and the limit of Quantitation was 5.0 ng/mg in spiked samples. The developed FICA achieves a high sensitivity in SBT detection, which is much lower than that of the colloidal gold-based immunochromatographic assay. This dual-function detection mode has great potential to be used as a rapid on-site semiquantitative method, providing an alternative mode for the determination of low levels of target analytes.

Recent advances in rare earth ion-doped upconversion nanomaterials: From design to their applications in food safety analysis

The misuse of chemicals in agricultural systems and food production leads to an increase in contaminants in food, which ultimately has adverse effects on human health. This situation has prompted a demand for sophisticated detection technologies with rapid and sensitive features, as concerns over food safety and quality have grown around the globe. The rare earth ion-doped upconversion nanoparticle (UCNP)-based sensor has emerged as an innovative and promising approach for detecting and analyzing food contaminants due to its superior photophysical properties, including low autofluorescence background, deep penetration of light, low toxicity, and minimal photodamage to the biological samples. The aim of this review was to discuss an outline of the applications of UCNPs to detect contaminants in food matrices, with particular attention on the determination of heavy metals, pesticides, pathogenic bacteria, mycotoxins, and antibiotics. The review briefly discusses the mechanism of upconversion (UC) luminescence, the synthesis, modification, functionality of UCNPs, as well as the detection principles for the design of UC biosensors. Furthermore, because current UCNP research on food safety detection is still at an early stage, this review identifies several bottlenecks that must be overcome in UCNPs and discusses the future prospects for its application in the field of food analysis.

Research Progress on Up-Conversion Fluorescence Probe for Detection of Perfluorooctanoic Acid in Water Treatment

Perfluorooctanoic acid (PFOA) is a new type of organic pollutant in wastewater that is persistent, toxic, and accumulates in living organisms. The development of rapid and sensitive analytical methods to detect PFOA in environmental media is of great importance. Fluorescence detection has the advantages of high efficiency and low cost, in which fluorescent probes have excellent fluorescence properties, excellent bio-solubility, and remarkable photostability. It is necessary to review the fluorescence detection routes for PFOA. In addition, the up-conversion of fluorescent materials (UCNPs), as fluorescent materials to prepare fluorescent probes with, has significant advantages and also attracts the attention of researchers, however, reviews related to their application in detecting PFOA and comparing them with other routes are rare. Furthermore, there are many strategies to improve the performance of up-conversion fluorescent probes including SiO₂ modification and amino modification. These strategies can enhance the detection effect of PFOA. Thus, this work reviews the types of fluorescence detection, the design, and synthesis of UCNPs, their recognition mechanism, properties, and their application progress. Moreover, the development trend and prospects of these detection probes are given.

Dual-readout fluorescence quenching immunochromatographic test strips for highly sensitive simultaneous detection of chloramphenicol and amantadine based on gold nanoparticle-triggered photoluminescent nanoswitch control

Herein, a novel fluorescence quenching immunochromatographic test strip (FQICTS) for simultaneous detection of chloramphenicol (CAP) and amantadine (AMD) was developed on the basis of inner filter effect (IFE), with the combination of gold nanoparticles (AuNPs) and highly luminescent green-emitting gold nanoclusters (AuNCs) as the IFE quencher/donor pair. The AuNPs could quench the excitation light and emission light of AuNCs and achieve a high IFE efficiency due to dual spectral overlapping. Under optimal conditions, the "turn-on" mode of the AuNCs-based dual-readout FQICTS showed good linearity for CAP detection in chicken samples from 0.05 ng/g to 10 ng/g, with a limit of detection (LOD) of 0.043 ng/g. The linear range of AMD is 0.5-50 ng/g, with LOD of 0.45 ng/g. The visual LODs of CAP and AMD in "turn-on" mode were 200 and 10 times lower than that in "turn-off" mode, respectively. The "turn-on" mode of FQICTS showed high recovery for detecting CAP (82.5-94.5%) and AMD (81.9-110.7%) spiked into chicken samples. The performance and practicability of the established method were verified with commercial enzyme-immunoassay kits, and good correlations were observed. Overall, the newly developed AuNCs-based dual-readout FQICTS is a promising on-site screening tool for rapid, high-sensitivity detection of multiple food contaminants in practical applications.

Novel immunochromatographic strip assay based on up-conversion nanoparticles for sensitive detection of imidacloprid in agricultural and environmental samples

Neonicotinoid insecticides are widely used in agriculture for pest control, but the pesticide residues in environmental and agricultural products were a big threat to the health of non-target organisms. In this study, a new immunochromatographic strip test was established for the rapid detection of imidacloprid residue, a neonicotinoid insecticide, based on up-conversion nanoparticles (UCNPs) coupled with the monoclonal antibody against imidacloprid. Under optimal conditions, the half inhibitory concentration (IC₅₀), detection limit, and the linear range of this strip were 8.37 ng/mL, 0.45 ng/mL, and 0.97-250 ng/mL. The strip test could be completed in 30 min. The average recoveries of imidacloprid spiked in water, Chinese cabbages, cucumber, honey, and tea samples were 70.1~101.8%, with coefficient of variations less than 18.9%. The strip was used to test real samples and verified by UPLC-MS/MS method with the good agreement (R² was 0.9825), indicating this novel strip immunoassay is accurate and reliable.

Lanthanide ion (Ln3+ )-based upconversion sensor for quantification of food contaminants: A review

The food safety issue has gradually become the focus of attention in modern society. The presence of food contaminants poses a threat to human health and there are a number of interesting researches on the detection of food contaminants. Upconversion nanoparticles (UCNPs) are superior to other fluorescence materials, considering the benefits of large anti-Stokes shifts, high chemical stability, non-autofluorescence, good light penetration ability, and low toxicity. These properties render UCNPs promising candidates as luminescent labels in biodetection, which provides opportunities as a sensitive, accurate, and rapid detection method. This paper intended to review the research progress of food contaminants detection by UCNPs-based sensors. We have proposed the key criteria for UCNPs in the detection of food contaminants. Additionally, it highlighted the construction process of the UCNPs-based sensors, which includes the synthesis and modification of UCNPs, selection of the recognition elements, and consideration of the detection principle. Moreover, six kinds of food contaminants detected by UCNPs technology in the past 5 years have been summarized and discussed fairly. Last but not least, it is outlined that UCNPs have great potential to be applied in food safety detection and threw new insight into the challenges ahead.

Biosensing based on upconversion nanoparticles for food quality and safety applications

Food safety and quality regulations inevitably call for sensitive and accurate analytical methods to detect harmful contaminants in food and to ensure safe food for the consumer. Both novel and well-established biorecognition elements, together with different transduction schemes, enable the simple and rapid analysis of various food contaminants. Upconversion nanoparticles (UCNPs) are inorganic nanocrystals that convert near-infrared light into shorter wavelength emission. This unique photophysical feature, along with narrow emission bandwidths and large anti-Stokes shift, render UCNPs excellent optical labels for biosensing because they can be detected without optical background interferences from the sample matrix. In this review, we show how this exciting technique has evolved into biosensing platforms for food quality and safety monitoring and highlight recent applications in the field.

Sensors/nanosensors based on upconversion materials for the determination of pharmaceuticals and biomolecules: An overview

Upconversion materials have been the focus of a large body of research in analytical and clinical fields in the last two decades owing to their ability to convert light between various spectral regions and their particular photophysical features. They emit efficient and sharp ultraviolet (UV) or visible luminescence after excitation with near-infrared (NIR) light. These features overcome some of the disadvantages reported for conventional fluorescent materials and provide opportunities for high sensitivity chemo-and bio-sensing. Here, we review studies that used upconversion materials as sensors for the determination of pharmaceuticals and biomolecules in the last two decades. The articles included in this review were retrieved from the SCOPUS database using the search phrases: "upconversion nanoparticles for determination of pharmaceutical compounds", and "upconversion nanoparticles for determination of biomolecules". Details of each developed upconversion nanoparticles based sensor along with their relevant analytical parameters are reported and carefully explained.

A Cu(II)-anchored unzipped covalent triazine framework with peroxidase-mimicking properties for molecular imprinting-based electrochemiluminescent detection of sulfaquinoxaline

The authors describe a method of electrochemiluminescent quantitation of the antibiotic sulfaquinoxaline (SQX). It relies on the use of a molecularly imprinted polymer and a Cu(II)-anchored unzipped covalent triazine framework (UnZ-CCTF) with excellent dispersibility, electrical conductivity, and peroxidaze-like activity. The framework was prepared by unzipping a covalent triazine framework under retention of basic triazine units. It was morphologically and structurally characterized by a range of instrumental techniques. The excellent peroxidase-mimicking effect of UnZ-CCTF on the electrochemiluminescence of the luminol/H₂O₂ system was exploited to design an ultrasensitive SQX assay with a 1.0-20 pM detection range and a detection limit of 0.76 pM (at 3δ/m). The technique was used for SQX quantitation in spiked milk samples, achieving recoveries of 94.0-104.8%. Graphical abstract Scheme of the sulfaquinoxaline molecularly imprinted electrochemiluminescence sensor based on Cu-anchored unzipped covalent triazine frameworks.

Fluorometric lateral flow immunochromatographic zearalenone assay by exploiting a quencher system composed of carbon dots and silver nanoparticles

It is found that the fluorescence of carbon dots (CD) with an emission peak at 459 nm is strongly quenched by silver nanoparticles (AgNPs) with their absorption peak at 430 nm. The finding was applied in a fluorescence quenchometric lateral flow immunochromatographic assay for detection of zearalenone (ZEN) with CDs conjugated to ovalbumin (OVA) as donor signal probe and AgNP-Ab as acceptor signal probe. The assay has an LOD of 0.1 μg·L^-1 for ZEN. This is 10 times better than the respective "turn-off" AgNP-based LFIA. In case of cereal samples and their products, the LODs range from 1 to 2.5 μg·kg^-1. Only minor cross reactivity is found for fusarium toxins, and no cross-sensitivity for aflatoxin B1, T-2 mycotoxin, ochratoxin A, deoxynivalenol, and fumonisin B1. The assay represents a simple, sensitive, and rapid tool for determination of ZEN in cereal samples and their products. Graphical abstract Schematic presentation of fluorescence quenching lateral flow immunochromatographic assay (FLFIA) based on carbon dots (CD) and silver nanoparticle (AgNP) fluorescence resonance energy transfer (FRET) system for the rapid high sensitive detection of zearalenone (ZEN) in cereal samples.