A hydrogen peroxide sensor based on TNM functionalized reduced graphene oxide grafted with highly monodisperse Pd nanoparticles

A Core–Shell Au@TiO2 and Multi-Walled Carbon Nanotube-Based Sensor for the Electroanalytical Determination of H2O2 in Human Blood Serum and Saliva

A hydrogen peroxide (H₂O₂) sensor was developed based on core–shell gold@titanium dioxide nanoparticles and multi-walled carbon nanotubes modified glassy carbon electrode (Au@TiO₂/MWCNTs/GCE). Core–shell Au@TiO₂ material was prepared and characterized using a scanning electron microscopy and energy dispersive X-ray analysis (SEM/EDX), transmission electron microscopy (TEM), atomic force microscopy (AFM), Raman spectroscopy, X-ray diffraction (XRD) and Zeta-potential analyzer. The proposed sensor (Au@TiO₂/MWCNTs/GCE) was investigated electrochemically using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The analytical performance of the sensor was evaluated towards H₂O₂ using differential pulse voltammetry (DPV). The proposed sensor exhibited excellent stability and sensitivity with a linear concentration range from 5 to 200 µM (R² = 0.9973) and 200 to 6000 µM (R² = 0.9994), and a limit of detection (LOD) of 1.4 µM achieved under physiological pH conditions. The practicality of the proposed sensor was further tested by measuring H₂O₂ in human serum and saliva samples. The observed response and recovery results demonstrate its potential for real-world H₂O₂ monitoring. Additionally, the proposed sensor and detection strategy can offer potential prospects in electrochemical sensors development, indicative oxidative stress monitoring, clinical diagnostics, general cancer biomarker measurements, paper bleaching, etc.

High-efficiency application of CTS-Co NPs mimicking peroxidase enzyme on TMB(ox)

In this study, analytical studies of Chitosan-Cobalt(II) (CTS-Co(II)) nanoparticles (CTS - Co NPs) by mimicking horseradish peroxidase (HRP) were evaluated. In the applications, it was observed that CTS-Co NPs 3,3' 5,5' tetramethylbenzidine (TMB) oxidized in the presence of hydrogen peroxide (H₂O₂). The required CTS-Co NPs were synthesized at 50 °C in 30 min and characterized using Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), inductively coupled plasma-optical emission spectroscopy (ICP-OES), and X-ray photon spectroscopy (XPS) was done. CTS-Co NPs were studied to develop a selective TMB biosensor on TMB(ox) substrate. The synthesized CTS-Co NPs formed a catalytic reaction with 30% 0.2 mM H₂O₂ on 0.2 M TMB substrate. After the catalytic reaction, sensitive signals were obtained from the desired biosensor. Electrochemical measurements were taken as low limit of 10 mg and a high limit of 20 mg for the determination of CTS-Co NPs to TMB(ox). In the microplate study; The sensors were applied on 1.5 μg and 3 μg CTS-Co NPs TMB(ox) substrate, respectively. CTS- Co NPs; for TMB(ox) determination, optical density (OD) measurement was taken as a low limit of 1.5 μg and a high limit of 3 μg. Electrochemical applications of particles and microplate reader results were compared with horseradish peroxidase (HRP) enzyme for sensor properties. According to the data obtained, it was observed that it behaved similarly to the CTS-Co NPs peroxidase enzyme. This work presents innovations for nanoparticle extraction and sensor study from chitosan and other naturally sourced polymers.

Design, synthesis, and catalytic performance of modified graphene oxide based on a cobalt complex as a heterogenous catalyst for the preparation of aminonaphthoquinone derivatives

We are reporting a functionalized graphene oxide catalyst developed by modifying graphene oxide surface using the covalent attachment of an amino-functionalized SiO2 sphere/cobalt complex. Silica network has special characteristics including mechanical strength, high thermal and chemical stability with good dispersion in solvents. The silica/graphene oxide mixture provides improved properties and extends the scope of application. Graphene oxide was functionalized by spherical silica with the help of hybrid silane-containing nitrogen to coordinate with Co(ii) for increasing the catalytic activity. The catalyst was characterized by Fourier Transform Infrared (FT-IR) spectroscopy, powder X-ray diffraction (XRD), Energy Dispersive X-ray (EDX), Scanning Electron Microscopy (SEM), Raman spectroscopy, and Thermal Gravimetric (TGA) analyses. The catalyst showed high catalytic activity for multi-component reactions in the synthesis of aminonaphthoquinones in ethanol solvent. The catalyst's ability to improve the yield (96-98%), reduce the reaction time (5-8 min), and recycling ability are important benefits for the catalyst.

Enhanced nonlinear absorption and efficient power limiting action of Au/Ag@ graphite core-shell nanostructure synthesized by laser ablation

Here we report a drastic enhancement of nonlinear absorption behaviour and exceptional optical limiting action of two core-shell systems (Au@graphite and Ag@graphite) prepared by adopting a fairly easy way in which we did not use any graphitic substrate. We carried out pulsed laser ablation of Au and Ag targets in toluene, monosubstituted benzene from which graphite layers of nanometer thickness has emerged as a result of photochemical reactions. The prepared samples were characterized and analyzed by UV/Vis spectroscopy, Raman spectroscopy, and TEM. Theoretical simulations of the core-shell nanostructures were done by the finite-difference time-domain method underlined the quenching of SPR in the case of both Au and Ag NPs by the graphitic layers evolved from toluene. Au and/or Ag@graphite core-shell structure exhibited a huge improvement in the nonlinear absorption behaviour and the optical limiting efficiency of these systems is found to be better than that of many benchmark optical limiters. The enhancement in nonlinear absorption property and the limiting actions of these systems were attributed to the enhanced excited-state absorption as well as free-carrier absorption arose as a result of the modification in the electronic structure of graphite on core-shell formation. Moreover, the metallic NPs also enhances nonlinear absorption through free-carrier absorption free-carrier absorption. So we believe these results are quite useful for guiding the characterization, monitoring the synthesis of similar nanostructures and for, the development of nanohybrids with desired properties for nonlinear optical, optoelectronic and photocatalytic applications.

Facile preparation of novel Pd nanowire networks on a polyaniline hydrogel for sensitive determination of glucose

In this study, novel Pd nanowire networks (PdNW) grown on three-dimensional polyaniline hydrogel (3D-PANI) were prepared via a facile one-step electrodeposition approach at a constant potential of - 0.2 V and further utilized as an electrochemical sensing material for sensitive determination of glucose in alkaline medium. Compared with the sensor based on Pd nanofilm (PdNF)/3D-PANI prepared by electrodeposition at - 0.9 V, the sensor based on PdNW/3D-PANI presented substantially enhanced electrocatalytic activity towards glucose oxidation, with an excellent sensitivity of 146.6 μA mM^-1 cm^-2, a linear range from 5.0 to 9800 μM, and a low detection limit of 0.7 μM and was, therefore, demonstrated to be available for the determination of glucose in human serum. These findings are likely attributed to the combination of advantages of both PdNW and 3D-PANI, which outperformed most other Pd-based non-enzymatic glucose sensors reported earlier. Moreover, this non-enzymatic electrochemical sensor based on PdNW/3D-PANI may serve as an alternative tool for the assay of glucose and possibly other biomolecules. Graphical abstract.

Optimization of gold-palladium core-shell nanowires towards H2O2 reduction by adjusting shell thickness

Designable bimetallic core-shell nanoparticles exhibit superb performance in many fields including industrial catalysis, energy conversion and chemical sensing, due to their outstanding properties associated with their tunable electronic structure. Herein, Au-Pd core-shell (Au_richPd@AuPd_rich) nanowires (NWs) were synthesized through a one-pot facile chemical reduction method in the presence of cetyltrimethyl ammonium bromide (CTAB) surfactant. The thickness of the Pd shell could be adjusted by directly controlling the Au/Pd feeding ratio while maintaining the nanowire morphology. The as-obtained Au₇₅Pd₂₅ core-shell NWs with a thin Pd_rich shell showed significantly enhanced activities towards the reduction of hydrogen peroxide with the sensitivity reaching 338 μA cm^-2 mM^-1 and a linear range up to 10 mM. In sum, Pd shell thickness could be used to adjust the electronic structure, thereby optimizing the catalytic activity.

Advances in nanomaterial application in enzyme-based electrochemical biosensors: a review

Electrochemical enzyme-based biosensors are one of the largest and commercially successful groups of biosensors. Integration of nanomaterials in the biosensors results in significant improvement of biosensor sensitivity, limit of detection, stability, response rate and other analytical characteristics. Thus, new functional nanomaterials are key components of numerous biosensors. However, due to the great variety of available nanomaterials, they should be carefully selected according to the desired effects. The present review covers the recent applications of various types of nanomaterials in electrochemical enzyme-based biosensors for the detection of small biomolecules, environmental pollutants, food contaminants, and clinical biomarkers. Benefits and limitations of using nanomaterials for analytical purposes are discussed. Furthermore, we highlight specific properties of different nanomaterials, which are relevant to electrochemical biosensors. The review is structured according to the types of nanomaterials. We describe the application of inorganic nanomaterials, such as gold nanoparticles (AuNPs), platinum nanoparticles (PtNPs), silver nanoparticles (AgNPs), and palladium nanoparticles (PdNPs), zeolites, inorganic quantum dots, and organic nanomaterials, such as single-walled carbon nanotubes (SWCNTs), multi-walled carbon nanotubes (MWCNTs), carbon and graphene quantum dots, graphene, fullerenes, and calixarenes. Usage of composite nanomaterials is also presented.

A review on recent advancements in electrochemical biosensing using carbonaceous nanomaterials

This review, with 201 references, describes the recent advancement in the application of carbonaceous nanomaterials as highly conductive platforms in electrochemical biosensing. The electrochemical biosensing is described in introduction by classifying biosensors into catalytic-based and affinity-based biosensors and statistically demonstrates the most recent published works in each category. The introduction is followed by sections on electrochemical biosensors configurations and common carbonaceous nanomaterials applied in electrochemical biosensing, including graphene and its derivatives, carbon nanotubes, mesoporous carbon, carbon nanofibers and carbon nanospheres. In the following sections, carbonaceous catalytic-based and affinity-based biosensors are discussed in detail. In the category of catalytic-based biosensors, a comparison between enzymatic biosensors and non-enzymatic electrochemical sensors is carried out. Regarding the affinity-based biosensors, scholarly articles related to biological elements such as antibodies, deoxyribonucleic acids (DNAs) and aptamers are discussed in separate sections. The last section discusses recent advancements in carbonaceous screen-printed electrodes as a growing field in electrochemical biosensing. Tables are presented that give an overview on the diversity of analytes, type of materials and the sensors performance. Ultimately, general considerations, challenges and future perspectives in this field of science are discussed. Recent findings suggest that interests towards 2D nanostructured electrodes based on graphene and its derivatives are still growing in the field of electrochemical biosensing. That is because of their exceptional electrical conductivity, active surface area and more convenient production methods compared to carbon nanotubes. Graphical abstract Schematic representation of carbonaceous nanomaterials used in electrochemical biosensing. The content is classified into non-enzymatic sensors and affinity/ catalytic biosensors. Recent publications are tabulated and compared, considering materials, target, limit of detection and linear range of detection.

Electrochemical performance of ruthenium nanoparticles decorated on nitride carbon for non-enzymatic detection of hydrogen peroxide

Development of high-performance Pt-free non-enzymatic hydrogen peroxide (H2O2) sensors on the basis of supported metal nanoparticles (NPs) is important for industrial and biological applications. Here, we report the preparation of ultrafine, surface-clean, and well-distributed Ru NPs and concomitant formation of nitride carbon (Ru/NC) by pyrolyzing tris(2,2'-bipyridyl)ruthenium(ii) chloride (TBRC) with carbon. The use of the nitrogen (N)-containing Ru complex of TBRC as the metal precursor is essential for the preparation of ultrafine and highly dispersed Ru NPs (1.20 nm in diameter) on a NC support. The as-synthesized Ru/NC-800 displays superior analytical performance for non-enzymatic detection of H2O2 with a low detection limit of 0.468 μM, high sensitivity of 698 μA mM-1 cm-2, excellent linear detection ranging from 0.001 to 10.000 mM, good stability, and high selectivity. The control experiment results indicate that the high-performance of Ru/NC-800 must be ascribed to the ultrasmall and highly dispersed Ru NPs and N-doping, which can supply a higher density of active sites available for H2O2 detection. This study provides a facile strategy to synthesize ultrafine metal NPs and for concomitant production of NC for electrocatalytic non-enzymatic sensing.

Composites of Palladium-Nickel Alloy Nanoparticles and Graphene Oxide for the Knoevenagel Condensation of Aldehydes with Malononitrile

Herein, we have described uniformly dispersed palladium-nickel nanoparticles furnished on graphene oxide (GO-supported PdNi nanoparticles) as a powerful heterogeneous nanocatalyst for the promotion of Knoevenagel reaction between malononitrile and aromatic aldehydes under mild reaction conditions. The successful characterization of PdNi nanoparticles on the GO surface was shown by X-ray diffraction, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy (HR-TEM), and TEM. GO-supported PdNi nanoparticles, which are used as highly efficient, stable, and durable catalysts, were used for the first time for the Knoevenagel condensation reaction. The data obtained here showed that the GO-supported PdNi nanocatalyst had a unique catalytic activity and demonstrated that it could be reused five times without a significant decrease in the catalytic performance. The use of this nanocatalyst results in a very short reaction time under mild reaction conditions, high recyclability, excellent catalytic activity, and a straightforward work-up procedure for Knoevenagel condensation of malononitrile and aromatic aldehydes.

Elastic layered rubber-graphene composite fabricated by rubbing-in technology for the multi-functional sensors

In this work, the elastic layered rubber-graphene composite based multi-functional sensor has been fabricated by rubbing-in technology. The effects of temperature, displacement, pressure and humidity on the impedance of the multi-functional sensor has been investigated in the frequency range of 0-200 kHz. The impedance of the samples decreased under the effect of uniaxial compressive displacement and under the effect of pressure. The temperature coefficient of the samples was found to be -0.836 and -0.862 %/°C with the increase in temperature from 29 °C to 54 °C, respectively, while the impedance of the samples decreased 1.26 ± 0.01 times with the increase in temperature from 29 °C to 54 °C while, respectively. The humidity dependent cross-sensitivity of the samples was investigated in the relative humidity range of (58-93) %RH and no effect of humidity on the performance of the sensor has been observed. The elastic layered rubber-graphene composite potentially can be used as displacement, frequency, temperature and pressure sensors.

Simplistic synthesis of ultrafine CoMnO3 nanosheets: An excellent electrocatalyst for highly sensitive detection of toxic 4-nitrophenol in environmental water samples

Design and fabrication of cost effective analytical tools to monitor toxic organic emissions in eco system is of a great necessity. Nitrophenols are a class of widespread toxic organic pollutant lead to serious adverse effects in biosphere on its consumption. This article reports a high sensitive, cost effective, robust electrochemical sensor for 4-nitrophenol (4-NP) in environmental water samples. A novel sheet like CoMnO₃ (CMO Ns) nanocatalyst was synthesized via oxalic acid assisted co-precipitation technique and employed as electrocatalyst for the high sensitive detection of 4-NP. The physiochemical properties of CMO Ns are studied in detail via XRD, FTIR, TEM, TGA, and XPS. TEM results reviled the protocol is an excellent way for synthesis of a uniformly distributed CMO Ns with lathery surface. Evident to the surface and other physiochemical studies the CMO Ns based sensor holds superior electrocatalytic activity towards 4-NP detection with excellent sensitivity (2.458 μA μM^-1 cm^-2) coupled with nanomolar detection (10 nm) limits. Moreover, the constructed sensor holds reliable long-term durability, good reproducibility, and excellent working stability. The practical applicability of the developed sensor was evaluated by determination of 4-NP in samples acquired from water resources with RSD ± 3.3%.

Enantioselective analysis of D- and l- Serine on a layer-by-layer imprinted electrochemical sensor

The present work describes a new, simple, and easy method of generating acrylamide functionalised reduced graphene oxide-fullerene layer-by-layer assembled dual imprinted polymers to quantify D- and L-Serine at ultra trace level in aqueous and real samples. Herein, the pencil graphite electrode was initially spin coated with D-Serine imprinted acrylamide functionalized reduced graphene oxide. After 10 min thermal treatment (50 °C), this electrode was again modified with L-Serine imprinted acrylamide functionalized fullerene molecules. This bilayer assembly was finally made thermally stable by 60 °C exposure for 3 h. The proposed sensor showed better electronic properties with an improved synergism. We have compared this modified electrode with other modified pencil graphite electrodes like single layered acrylamide functionalised reduced graphene oxide or fullerene, single layered acrylamide functionalised reduced graphene oxide-fullerene composite and double layered acrylamide functionalised reduced graphene oxide or fullerene molecules, which yielded very inferior sensitivity due to possible agglomeration and decreased synergism. The chosen system demonstrated a very good analytical figures of merit with differential pulse anodic stripping voltammetry and cyclic voltammetry transduction, showing lower limits of detection (0.24 ng mL^-1, S/N = 3) for both isomers. The proposed sensor assures practical applications as disease biomarker, manifesting several diseases at very ultra-trace level.

Role of Au(NPs) in the enhanced response of Au(NPs)-decorated MWCNT electrochemical biosensor

Background

The combination of Au-metallic-NPs and CNTs are a new class of hybrid nanomaterials for the development of electrochemical biosensor. Concentration of Au(nanoparticles [NPs]) in the electrochemical biosensor is crucial for the efficient charge transfer between the Au-NPs-MWCNTs modified electrode and electrolytic solution.

Methods

In this work, the charge transfer kinetics in the glassy carbon electrode (GCE) modified with Au(NPs)–multiwalled carbon nanotube (MWCNT) nanohybrid with varied concentrations of Au(NPs) in the range 40–100 nM was studied using electrochemical impedance spectroscopy (EIS). Field emission scanning electron microscopy and transmission electron microscopy confirmed the attachment of Au(NPs) on the surface of MWCNTs.

Results

The cyclic voltammetry and EIS results showed that the charge transfer mechanism was diffusion controlled and the rate of charge transfer was dependent on the concentration of Au(NPs) in the nanohybrid. The formation of spherical diffusion zone, which was dependent on the concentration of Au(NPs) in nanohybrids, was attributed to result in 3 times the increase in the charge transfer rate k_s, 5 times increase in mass transfer, and 5% (9%) increase in I_pa (I_pc) observed in cyclic voltammetry in 80 nM Au(NP) nanohybrid-modified GCE from MWCNT-modified GCE. The work was extended to probe the effect of charge transfer rates at various concentrations of Au(NPs) in the nanohybrid-modified electrodes in the presence of Escherichia coli. The cyclic voltammetry results clearly showed the best results for 80 nM Au(NPs) in nanohybrid electrode.

Conclusion

The present study suggested that the formation of spherical diffusion zone in nanohybrid-modified electrodes is critical for the enhanced electrochemical biosensing applications.

Highly sensitive glucose sensor based on monodisperse palladium nickel/activated carbon nanocomposites

Glucose enzyme biosensors have been used for a variety of applications such as medical diagnosis, bioprocess engineering, beverage industry and environmental scanning etc. and there is still a growing interest in glucose sensors. For this purpose, addressed herein, as a novel glucose sensor, highly sensitive activated carbon (AC) decorated monodisperse nickel and palladium alloy nanocomposites modified glassy carbon electrode (Ni-Pd@AC/GCE NCs) have been synthesized by in-situ reduction technique. Raman Spectroscopy (RS), X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM), cyclic voltammetry (CV) and chronoamperometry (CA) were used for the characterization of the prepared non-enzymatic glucose sensor. The characteristic sensor properties of the Ni-Pd@AC/GCE electrode were compared with Ni-Pd NCs/GCE, Ni@AC/GCE and Pd@AC/GCE and the results demonstrate that the AC is very effective in the enhancement of the electrocatalytic properties of sensor. In addition, the Ni-Pd@AC/GCE nanocomposites showed a very low detection limit of 0.014 μM, a wide linear range of 0.01 mM-1 mM and a very high sensitivity of 90 mA mM^-1 cm^-2. Furthermore, the recommended sensor offer the various advantageous such as facile preparation, fast response time, high selectivity and sensitivity. Lastly, monodisperse Ni-Pd@AC/GCE was utilized to detect glucose in real sample species.

Facile synthesis of size-controlled Fe2O3 nanoparticle-decorated carbon nanotubes for highly sensitive H2S detection

Hydrogen sulfide (H₂S) is one of the most plentiful toxic gases in a real-life and causes a collapse of the nervous system and a disturbance of the cellular respiration. Therefore, highly sensitive and selective H₂S gas sensor systems are becoming increasingly important in environmental monitoring and safety. In this report, we suggest the facile synthesis method of the Fe₂O₃ particles uniformly decorated on carbon nanotubes (Fe₂O₃@CNT) to detect H₂S gas using oxidative co-polymerization (pyrrole and 3-carboxylated pyrrole) and heat treatment. The as prepared Fe₂O₃@CNT-based sensor electrode is highly sensitive (as low as 1 ppm), selective and stable to H₂S gas at 25 °C, which shows promise for operating in medical diagnosis and environment monitoring. Excellent performance of the Fe₂O₃@CNT is due to the unique morphology of the nanocomposites made from uniformly dispersed Fe₂O₃ nanoparticles on the carbon surface without aggregation.

Fe₂O₃ uniformly dispersed on carbon nanotubes are synthesized using facile oxidative co-polymerization of monomers followed by heat treatment to apply electrode materials for a highly sensitive H₂S chemical sensor system.