Accurate SERS detection of malachite green in aquatic products on basis of graphene wrapped flexible sensor

Rapid identification and quantitative analysis of malachite green in fish via SERS and 1D convolutional neural network

Rapid and quantitative detection of malachite green (MG) in aquaculture products is very important for safety assurance in food supply. Here, we develop a point-of-care testing (POCT) platform that combines a flexible and transparent surface-enhanced Raman scattering (SERS) substrate with deep learning network for achieving rapid and quantitative detection of MG in fish. The flexible and transparent SERS substrate was prepared by depositing silver (Ag) film on the polydimethylsiloxane (PDMS) film using laser molecular beam epitaxy (LMBE) technique. The wrinkled Ag NPs@PDMS film exhibits high SERS activity, excellent reproducibility and good mechanical stability. Additionally, the fast in situ detection of MG residues onfishscales was achieved by using the wrinkled Ag NPs/PDMS film and a portable Raman spectrometer, with a minimum detectable concentration of 10-6 M. Subsequently, a one-dimensional convolutional neural network (1D CNN) model was constructed for rapid quantification of MG concentration. The results demonstrated that the 1D CNN quantitative analysis model possessed superior predictive performance, with a coefficient of determination (R2) of 0.9947 and a mean squared error (MSE) of 0.0104. The proposed POCT platform, integrating a transparent flexible SERS substrate, a portable Raman spectrometer and a 1D CNN model, provides an efficient strategy for rapid identification and quantitative analysis of MG in fish.

A ratiometric fluorescent sensor based on S-doped BCNO quantum dots and Au nanoclusters combined with 3D-printing portable device for the detection of malachite green

Sulfur-doped BCNO quantum dots (S-BCNO QDs) emitting green fluorescence were prepared by elemental doping method. The ratiometric fluorescence probe with dual emissions was simply established by mixed S-BCNO QDs with gold nanoclusters (GSH-Au NCs). Because the emission spectrum of Au NCs (donor) at 615 nm overlapped well with the ultraviolet absorption of malachite green (MG), fluorescence resonance energy transfer (FRET) can be achieved. When the concentration of MG increased, the fluorescence intensity (F495) of S-BCNO QDs decreased slowly, while the fluorescence intensity (F615) of Au NCs decreased sharply. The fluorescence intensity ratio of F615/F495 decreased with the increase of MG. By plotting the F615/F495 values against MG concentration, a sensitive and rapid detection of MG was possible with a wide detection range (0.1-50 µM) and a low detection limit of 10 nM. Due to the accompanying fluorescence color change from pink to blue-green, it can be used for visual detection. A three dimensional-printing device utilizing digital image colorimetry to capture color changes through the built-in camera, enables quantitative detection of MG with a good linearity between the values of red/green ratio and MG concentrations at the range 1-50 µM. This sensing platform had a range of advantages, including high cost-effectiveness, portability, ease of operation, and high sensitivity. Furthermore, the sensing platform was successfully applied to the detection of MG in real water sample and fish samples, thereby verifying the reliability and effectiveness of this sensing platform in water quality monitoring and food safety.

Flexible, foldable and transparent SERS film with high sensitivity and signal homogeneity via silver ion exchange and in-situ reduction

The adhesion between metal plasma and substrate was the key of surface-enhanced Raman scattering (SERS) technology. The preparation of ideal SERS substrate with multiple advantages such as high sensitivity and good signal reproducibility was still the focus of research. A flexible foldable and transparent fluorinated polyimide/silver NPs (FPI@Ag) SERS film was fabricated by the ion exchange and in-situ reduction method in this work. The effects of KOH hydrolysis time, AgNO3 ion exchange time and concentration, the type and concentration of reducing agents on the SERS performance of the FPI@Ag film were systematically discussed. As a result, the hydrolysis time of KOH affected the thickness of the metallic silver layer, the concentration of AgNO3 affected the size and spacing of Ag NPs, and the Raman signal of was remarkably enhanced when borane dimethylamine complex (DMAB) was used as reducing agent. When the detection limit of 4-Aminothiophenol was as low as 1 × 10-11 mol·L-1, the obvious Raman characteristic peak still appeared. The enhancement factor (EF) was up to 9.4 × 107. The linear quantification range was achieved in the range from 10-3-10-11 mol·L-1, R2 = 0.9987. In addition, we also performed multi-cycle bending and torsion test on the FPI@Ag film, and obtained stable Raman signals. The prepared FPI@Ag film can be attached to the surface of uneven samples, which can be used for on-site Raman detection and analysis.

Synthesis of SiO2@Ag Nanocomposite for Investigating Metal-Enhanced Fluorescence and Surface-Enhanced Raman Spectroscopy

SiO2@Ag nanocomposite (NC) has been synthesized by the chemical reduction and Stӧber method for Metal-enhanced fluorescence (MEF) of Rhodmine 6G (R6G) and Surface-enhanced Raman spectroscopy (SERS) of Malachite green (MG). As-synthesized SiO2@Ag NC indicated SiO2 nanosphere (NS) and Ag nanoparticle (NP) morphologies. The SiO2@Ag NC was high quality with a well-defined crystallite phase with average sizes of 24 nm and 132 nm for Ag NP and SiO2 NC, respectively. By using SiO2@Ag NC, the photoluminescence (PL) intensity of the R6G (at 59.17 ppm) was increased approximately 133 times. The SERS of the MG (at 1.0 ppm) with SiO2@Ag NC as substrate clearly observed vibrational modes in MG dye at 798, 916, 1172, 1394, and 1616 cm-1. As a result, the SERS enhancement factor (EFSERS) at 1172 cm-1 obtained 6.3 × 106. This initial study points to the potential of SiO2@Ag NC as a promising material for MEF and SERS substrates to detect dyes at low concentrations.

Trace analysis of food by surface-enhanced Raman spectroscopy combined with molecular imprinting technology: Principle, application, challenges, and prospects

Surface-enhanced Raman spectroscopy (SERS) is a rapid detection method with high sensitivity and simple pretreatment, but can be affected by interference from matrix components. By incorporating molecularly imprinted polymers (MIPs) that recognize specific targets, MIP-SERS sensors effectively overcome the interference of complex matrices and offer improved stability and sensitivity. This review provides a comprehensive understanding of the applications of MIP-SERS sensors for the detection of trace toxic substances in food. The underlying mechanism and development of SERS technology and the principle and classification of MIPs technology are discussed. Furthermore, the types of MIP-SERS sensors are introduced, with their advantages and disadvantages systematically illustrated. Recent advances in MIP-SERS technology for the detection of mycotoxins, additives, prohibited dyes, pesticides, veterinary drug residues, and other hazardous substances in food are highlighted. Finally, this review discusses the challenges associated with MIP-SERS technology and proposes future development prospects.

Detection of pesticide residues on flexible and transparent fluorinated polyimide film based on surface-enhanced Raman spectroscopy technology

BACKGROUND

Excessive pesticide residues will seriously endanger human health. The complexity and lag of the current popular analytical methods hinder the timeliness of food safety analysis. Surface-enhanced Raman scattering (SERS) was an ultra-sensitive vibration spectroscopy technology with the advantages of less time cost, non-destructive and semi-quantitative detection, which has attracted much attention in the rapid field detection of pesticide residue. It was clear that we need an efficient and convenient substrate for pesticide residue detection based on SRES technology, which needs to be portable, flexible, transparent and easy to detect irregular object surfaces.

RESULTS

A novel SERS sensor was designed to detect single and multi-component pesticide residues on irregular fruit and vegetable surfaces by in-situ growth of silver nanoparticles on a flexible and transparent fluorinated polyimide (FPI) substrate. Among them, Ag NPs were synthesized by liquid phase reduction method (AgNO3-PVP and NaBH4). The results showed that the detection limit of 1-4 BDT was down to 10-10 mol L-1, the enhancement factor (EF) was up to 1.57 × 107, and relative standard deviation (RSD) was 7.49 %. By this method, tricyclazole solution at a concentration of 0.01 mg L-1 was still detectable by the FPI@Ag SERS substrate. The linear quantification was achieved in the range from 100 mg L-1 to 0.01 mg L-1. Two mixed pesticides, tricyclazole and imazalil, were also successfully distinguished.

SIGNIFICANCE

This represents the formation of a flexible, foldable and transparent substrate for rapid on-site detection. Results can be obtained in <5 min by attaching the substrate to the substance to be tested. And the SERS substrate prepared with high sensitivity, stability, portable and convenient analysis, which provided new ideas for efficient and rapid household food safety detection.

High-Performance Au@Ag Nanorods Substrate for SERS Detection of Malachite Green in Aquatic Products

In order to improve the detection performance of surface-enhanced Raman scattering (SERS), a low-cost Au@Ag nanorods (Au@Ag NRs) substrate with a good SERS enhancement effect was developed and applied to the detection of malachite green (MG) in aquaculture water and crayfish. By comparing the SERS signal enhancement effect of five kinds of Au@Ag NRs substrates with different silver layer thickness on 4-mercaptobenzoic acid (4-MBA) solution, it was found that the substrate prepared with 100 µL AgNO3 had the smallest aspect ratio (3.27) and the thickest Ag layer (4.1 nm). However, it showed a good signal enhancement effect, and achieved a detection of 4-MBA as low as 1 × 10-11 M, which was 8.7 times higher than that of the AuNRs substrate. In addition, the Au@Ag NRs substrate developed in this study was used for SRES detection of MG in crayfish; its detection limit was 1.58 × 10-9 M. The developed Au@Ag NRs sensor had the advantages of stable SERS signal, uniform size and low cost, which provided a new tool for SERS signal enhancement and highly sensitive SERS detection method development.

Fabrication of MIL-101(Cr)/silver nanocomposites as SERS substrate for sensitive determination of malachite green and crystal violet in tilapia

Nanocomposites with multiple functions have attracted much attention in designing novel SERS substrates. In this report, the enrichment ability of MIL-101(Cr) and the local surface plasma resonance (LSPR) of silver nanoparticles are combined to fabricate a SERS substrate denoted as MIL-101-MA@Ag, which can simultaneously produce high-density and uniformly distributed hot spots. Moreover, the enrichment ability of MIL-101(Cr) can further improve the sensitivity by concentrating and transferring the analytes in the vicinity of hot spots. Under optimal conditions, MIL-101-MA@Ag showed good SERS activity for malachite green (MG) and crystal violet (CV), with detection limits as low as 9.5×10-11 M and 9.2×10-12 M at 1616 cm-1, respectively. The prepared substrate has been successfully applied to detect MG and CV in tilapia, the recovery rate of fish tissue extract was 86.4~102%, and the relative standard deviation (RSD) was 8.9~15%. The results demonstrate that MOF-based nanocomposites are expected to be useful SERS substrates and have a universal applicability for the detection of other hazardous molecules.

Label free detection of multiple trace antibiotics with SERS substrates and independent components analysis

Surface enhanced Raman spectroscopy (SERS) has been widely studied and recognized as a powerful label-free technique for trace chemical analysis. However, its drawback in simultaneously identifying several molecular species has greatly limited its real-world applications. In this work, we reported a combination between SERS and independent component analysis (ICA) to detect several trace antibiotics which are commonly used in aquacultures, including malachite green, furazolidone, furaltadone hydrochloride, nitrofurantoin, and nitrofurazone. The analysis results indicate that the ICA method is highly effective in decomposing the measured SERS spectra. The target antibiotics could be precisely identified when the number of components and the sign of each independent component loading were properly optimized. With SERS substrates, the optimized ICA can identify trace molecules in a mixture at a concentration of 10^-6 M achieving the correlation values to the reference molecular spectra of 71-98%. Furthermore, measurement results obtained from a real-world sample demonstration could also be recognized as an important basis to suggest this method is promising for monitoring antibiotics in a real aquatic environment.

Adhesive surface-enhanced Raman scattering Cu-Au nanoassembly for the sensitive analysis of particulate matter

Surface-enhanced Raman scattering (SERS) has been used in atmospheric aerosol detection as it enables the high-resolution analysis of particulate matter. However, its use in the detection of historical samples without damaging the sampling membrane while achieving effective transfer and the high-sensitivity analysis of particulate matter from sample films remains challenging. In this study, a new type of SERS tape was developed, consisting of Au nanoparticles (NPs) on an adhesive double-sided Cu film (DCu). The enhanced electromagnetic field generated by the coupled resonance of the local surface plasmon resonances of AuNPs and DCu led to an enhanced SERS signal with an experimental enhancement factor of 10⁷. The AuNPs were semi-embedded and distributed on the substrate, and the viscous DCu layer was exposed, enabling particle transfer. The substrates exhibited good uniformity and favorable reproducibility with relative standard deviations of 13.53% and 9.74% respectively, and the substrates could be stored for 180 days with no signs of signal weakening. The application of the substrates was demonstrated by the extraction and detection of malachite green and ammonium salt particulate matter. The results demonstrated that SERS substrates based on AuNPs and DCu are highly promising in real-world environmental particle monitoring and detection.

Ag NPs@PDMS nanoripple array films as SERS substrates for rapid in situ detection of pesticide residues

The large-area fabrication of flexible and transparent surface-enhanced Raman scattering (SERS) substrates with high performance by a facile and efficient method is still challenging. Here, we demonstrated a large-scale, flexible and transparent SERS substrate composed of PDMS nanoripple array film decorated with silver nanoparticles (Ag NPs@PDMS-NR array film) prepared by a combination of plasma treatment and magnetron sputtering. The performances of SERS substrates were characterized by rhodamine 6G (R6G) using a handheld Raman spectrometer. The optimal Ag NPs@PDMS-NR array film exhibited high SERS sensitivity, with a detection limitation of R6G reaching 8.20 × 10^-8 M as well as excellent uniformity (RSD = 6.8%) and batch-to-batch reproducibility (RSD = 2.3%). In addition, the substrate showed outstanding mechanical stability and good SERS enhancement by backside illumination, thus it was suitable for in situ SERS detection on curved surfaces. The detection limit of malachite green on apple and tomato peels was 1.19 × 10^-7 and 1.16 × 10^-7 M, respectively, and quantitative analysis of pesticide residues could be realized. These results demonstrate that the Ag NPs@PDMS-NR array film has great practical potential in rapid in situ detection of pollutants.

Double-sided plasmonic metasurface for simultaneous biomolecular separation and SERS detection

Porous membrane-based nanofiltration separation of small biomolecules is a widely used biotechnology for which size-based selectivity is a critical parameter of technological relevance. Efficient determination of size selectivity calls for an advanced detection method capable of performing sensitive, rapid, and on-membrane examination. Surface-enhanced Raman spectroscopy (SERS) is such a detection method that has been widely recognized as an ultrasensitive technique for trace-level detection with sensitivity down to the single-molecule level. In this work, we for the first time develop a double-sided hierarchical porous membrane-like plasmonic metasurface to realize high-selectivity bimolecular separation and simultaneous ultrasensitive SERS detection. This highly flexible device, consisting of subwavelength nanocone pairs surrounded by randomly orientated sub-5 nm nanogrooves, was prepared by combining customized "top-down" fabrication of conical nanopores in an ion-track registered polycarbonate membrane and self-assembly of nanogrooves on the membrane surface through physical vapor deposition. The unique tip-to-tip oriented conical nanopores in the device enables excellent size-based molecular selectivity; the hierarchical groove-pore structure supports a peculiar cascaded electromagnetic near-field enhancement mechanism, endowing the device with SERS-based molecular detection of ultrahigh sensitivity, uniformity, repeatability, and polarization independence. With such dual structural merits and performance enhancement, we demonstrate effective nanofiltration separation of small-sized adenine from big-sized ss-DNA and synergistic SERS determination of their species. We experimentally demonstrate an ultrasensitive detection of 4-mercaptopyridine down to 10 pM. Together with its unparalleled mechanical flexibility, this double-side-responsive plasmonic metasurface membrane can find great potential in real-world molecular filtration and detection under extremely complex working conditions.

Finite-difference time-domain to screen Au NPs as SERS active substrate for the sensitive determination of prohibited drugs in fish via solvent cleaning

Surface enhanced Raman spectroscopy (SERS), as a molecule-specific method using plasmonic nanostructures to significantly enhance signal intensity, has been employed in various fields. In our study, we investigated the size effect of gold nanoparticles (Au NPs) on surface plasmon response by finite-difference time-domain (FDTD) simulation. In addition, SERS experiments, using the same concentrations of crystal violet (CV), were also carried out to confirm the simulation results. On this basis, the size of citrate-stabilized Au NPs (∼100 nm) was controlled by a seed-mediated growth, thus providing great electromagnetic field enhancement for SERS detection of CV in fish. Methanol solvent cleaning along with high speed centrifugal separation was developed, which could not only remove lipids in fish, but also produce hot spots via induced aggregation of Au NPs. The SERS detection limit of CV in fish could be less than 1 ppb. Such cost-effective and facile routes will be attractive for the trace detection of various analytes in complex matrices.

Aluminum sheet induced flower-like carbon nitride anchored with silver nanowires for highly efficient SERS detection of trace malachite green

The sensitive detection of malachite green (MG) in aquaculture wastewater is necessary for its residual poses a great threat to the living systems. Herein, the flower-like C₃N₄ (f-C₃N₄) nanostructure induced by Al sheet in the hydrothermal process is constructed. Subsequently, Ag nanowires (AgNWs) supported on Al/f-C₃N₄ and the strong interaction between AgNWs and Al/f-C₃N₄ are confirmed by XPS, Raman spectroscopy, UV-vis diffuse reflectance and fluorescence spectroscopy. Importantly, the portable Al/f-C₃N₄/AgNWs substrate shows the outstanding SERS response for MG, which is attributed to enhanced electromagnetic effect of AgNWs on large amount of corrugated and creviced regions in the flower-like Al/f-C₃N₄ and the charge transfer among the components. Also, the prepared Al/f-C₃N₄ nanostructure provides large specific surface area and abundant "N" active sites for AgNWs, and the high enrichment ability of Al/f-C₃N₄ towards MG molecules by the strong π-π stacking interaction. The detection limit of Al/f-C₃N₄/AgNWs for MG is as low as 8.38 × 10^-12 mol L^-1. The substrate can be reproduced and reused for at least 7 cycles, and the activity can still be kept after laid up for 49 days. Importantly, it unfolds a good sensitivity and selectivity for MG in actual water sample. Results indicate that the Al/f-C₃N₄/AgNWs substrate has a promising potential in practical application for trace detection of MG.

Aquaculture drug degradation in persulfate by PANI-based microparticles controlled via ultrasonic field: Forced motion of "burning hot micromotors"

The triphenylmethane derivative malachite green (tpm_MaG) despite repeated prohibitions but is frequently detected in aquatic environment and draws emerging attention because of the potential poisonous effects. The polyaniline/persulfate with ultrasound catalysis (US/PANI-PS) was developed for tpm_MaG removal. The effects of 12 factors and the optimization by response surface methodology (RSM) for tpm_FG removal were evaluated based on the pseudo-first-kinetics (k_obs). From free radical inhibition, the ratios of active species in US/PANI-PS (δ₁₁ = 0.355, δ₁₂ = 0.593) were close to that in US-PS (δ₂₁ = 0.346, δ₂₂ = 0.586) and different to that in PANI-PS and PS systems. A possible degradation pathway (hydroxylation, N-demethylation, deamination, and open-benzene ring) was explored by gas chromatography-mass spectrometer (GC/MS) and high performance liquid chromatography-mass spectrometer (HPLC-MS). The designed reactor involving the US-driven PANI was simulated by acoustic-piezoelectric interaction. From cavitation calculations, the estimated effective-mean temperature at bubble-water interface had little increasing (from 704 K to 711 K) after adding the PANI, however, the adsorption capacity of tpm_MaG in reactive zone decreased from 0.0891 μM to 0.0787 μM. The mechanism (PANI hot turbo-micromotors) with US/PANI-PS was proposed. The tpm_MaG was removed with a low treatment cost of 2.81 $⋅m^-3 (the EE/O value 18.29 kWh⋅m^-3) by US/PANI-PS, presenting a cost-effective treating process. The reusability tests and characterizations (contact angle, X-ray diffraction (XRD), and scanning electron microscope (SEM)) further confirmed the stability of PANI.

A nanosol SERS/RRS aptamer assay of trace cobalt(ii) by covalent organic framework BtPD-loaded nanogold catalytic amplification

The determination of heavy metal ions has always been a hot topic in the field of environmental analysis. In this study, a new covalent organic framework-loaded gold nanoparticle (AuCOF) nanocatalytic amplification signal strategy was developed to determine trace Co²⁺ in water. The COF of BtPD was synthesized from 1,3,5-benzene tricarboxaldehyde and p-phenylenediamine, and a new kind of AuBtPD nanosol was prepared by reduction of HAuCl₄ to AuNPs on the BtPD carrier. It has strong catalysis of the new indicator reaction of sodium formate reducing HAuCl₄ to AuNP sol with strong resonance Rayleigh scattering (RRS) at 370 nm and surface enhanced resonance Raman scattering (SERS) activity at 1614 cm^-1 in the presence of a Victoria blue 4R (VB4R) molecular probe. Combining the nanocatalytic reaction to amplify the dual-scattering signals and specific aptamer (Apt) of cobalt ions, a new, fast, stable, sensitive and specific dual mode method for detecting Co²⁺ was established; the RRS signal I _370nm and SERS signal I _1614cm^-1 show a linear relationship with the concentration of 0.033-1 nmol L^-1 Co²⁺ and with a limit of detection (LOD) of 0.02 nmol L^-1. The two methods have been applied to the determination of Co²⁺ in industrial wastewater, tap water and river water, and the results are satisfactory.

In-situ surface-enhanced Raman scattering based on MTi20 nanoflowers: Monitoring and degradation of contaminants

Real-time and in-situ monitoring of chemical reactions has attracted great attention in many fields. In this work, we in-situ monitored the photodegradation reaction process of methylene blue (MB) by Surface enhanced Raman scattering (SERS) technique. An effective and versatile SERS platform assembled from MoS₂ nanoflowers (NFs) and TiO₂ nanoparticles (NPs) was prepared successfully. The optimized MoS₂/TiO₂ substrate (MTi₂₀) exhibits not only an ultra-high SERS response but also the excellent catalytic degradation performance to the contaminant MB, which provided a new material for real-time and in-situ monitoring the photodegradation process. Experiments prove that the detection limit is as low as 10^-13 M, and degradation rate is as high as 97.2% in 180 s, respectively. And the activity of the substrate kept in the air for 90 days is almost unchanged. Furthermore, as a practical SERS substrate, MTi₂₀ can also detect trace amounts of other harmful substances including malachite green (MG), bisphenol A (BPA) and endosulfan. Thus, this study come up with a new orientation at the real-time and in-situ monitoring of photocatalytic reaction and may be applied in environmental monitoring and food security fields in the future.

Quantitative SERS sensor based on self-assembled Au@Ag heterogeneous nanocuboids monolayer with high enhancement factor for practical quantitative detection

Accurate and rapid quantitative detection of pesticide and pollutant levels in the actual sample can aid in protecting food security, environmental security, and human health. A high Raman enhancement factor and good repeatability of the surface-enhanced Raman spectroscopy (SERS) substrates are favorable to quantitative analysis. Herein, a quantitative SERS sensor based on constructed self-assembled plasmonic Au@Ag heterogeneous nanocuboids (Au@Ag NCs) monolayer was developed. The sensor was used to quantitatively detect the trace pesticides extracted from pear surfaces and pollutants in fishpond water. Densely packed Au@Ag NCs fabricated into large-scale monolayer films were chemically functionalized using 4-methyl-thiobenzoic acid (4-MBA) at the organic/aqueous interface, in which plentiful nanogaps contribute to increase hotspots. Their sharp corners and edges make the sensor have high SERS performance through providing abundant "hot spots." The obtained optically SERS-based sensor with uniform liquid-state interfacial nanoparticle arrays appeared to have nice SERS performance and uniformity using crystal violet (CV) as a probe molecule. In particular, the proposed SERS sensor was applied for quantitative detection of thiabendazole (TBZ) extracted from pear surfaces and malachite green (MG) in fishpond water down to levels of 0.0105 nM and 0.87 nM for SERS assay respectively. As a result, our proposed SERS quantitative detection strategy is quite preferred to on-site analysis and supervision of contaminant in food samples.

Peroxidase-like recyclable SERS probe for the detection and elimination of cationic dyes in pond water

A peroxidase-like MOF coated magnetic surface-enhanced Raman scattering (SERS) probe as Ni@Mil-100(Fe)@Ag nanowires (NMAs) was developed, which can detect multiple cationic dyes with a good recyclability and a high sensitivity. Specifically, Mil-100(Fe) with peroxidase-like activity was fabricated on the magnetic prickly Ni nanowires through layer-by-layer (LBL) method. With the presence of 10 mM H₂O₂, hydroxyl radical (•OH) produced by peroxidase-like catalytic reaction of Mil-100(Fe) layer can easily eliminate the pollution molecules within 1 min without any requirement for expensive equipment or complicated process. The magnetic NMAs can provide a rapid refreshment for at least 10 times. In addition, carboxyl-functionalized Mil-100(Fe) can not only increase the decoration efficiency of Tollens but also promote the selective enrichment of the cationic dyes, which endows the probe with a greatly improved sensitivity with a limit of detection (LOD) as low as 10^-10 M for crystal violet (CV). Following the erasure by H₂O₂, multiple cationic fishery drugs in pond water can be sequentially detected. Such a recyclable SERS probe holds a great potential in various applications as aquaculture, biomedicine and chemical analysis.

A survey of chloramphenicol residues in aquatic products of Shenzhen, South China

Food safety is a top priority of concern for consumers. To promote growth, as well as to treat diseases which occur in aquaculture, antibiotics, even banned veterinary antibiotics, are widely used. This survey investigated the levels of chloramphenicol (CAP) by LC-MS/MS in 291 aquatic samples (all the products in this survey were local sales, exported products were not included), including shellfish, shrimp and fish, from Shenzhen, South China. The CAP concentrations in these samples (based on wet weight) were: shellfish (<LOD-205 µg kg^-1, mean: 68.8 µg kg^-1); shrimp (<LOD-2.2 µg kg^-1, mean: 0.5 µg kg^-1) and fish (<LOD-1.9 µg kg^-1, mean: 0.7 µg kg^-1). The highest concentration of CAP was found in shellfish samples (Mactra veneriformis, 205 µg kg^-1), these levels were greater than those reported in aquatic products from other locations in China. The detection rate of CAP was 37.2% in shellfish samples (64/172), 13.6% in shrimp samples (3/22) and 16.5% in fish samples (16/97). The detection rate of CAP in shellfish samples was higher than that in fish and shrimp samples, and therefore food safety in this region cannot be ignored. The results obtained from the current study indicated a high incidence of CAP in aquatic products in this region and argue for stronger market supervision and regulation in China.

Tip-to-tip assembly of urchin-like Au nanostar at water-oil interface for surface-enhanced Raman spectroscopy detection

Au Nanostar (NS) monolayer as a surface enhanced Raman scattering (SERS) substrate has been synthesized by self-assembly at a water-oil interface. It is confirmed from the experiment and simulation results that the Au NS monolayer includes lots of "hot spots" at or between the tips of the Au NSs, enhancing the local electromagnetic fields and giving rise to strong SERS signals sequentially. The limit of detection is determined to be down to 4.2 × 10^-12 M for rhodamine 6G. Furthermore, the Au NS monolayer can detect multiple molecules, including thiabendazole, methylene blue, 4-mercaptobenzoic acid, and p-amino thiophenol, indicating that the SERS substrate composed of Au NS monolayer has potential applications in analytical chemistry, food safety, and environmental safety.

A novel core-shell upconversion nanoparticles@zirconium-based metal organic framework fluorescent nanoprobe for efficient continuous detection of trace methylene blue and ferrous ions

Herein, we have synthesized Gd₂O₃:Yb,Er@UiO-66-NH₂ (UiO-66-NH₂ represent a zirconium-based metal organic framework [Zr₆O₄(OH)₄(ata)₁₂], ata: 2-aminoterephthalate) core-shell composites to develop an upconversion fluorescent nanoprobe for efficient detection of trace methylene blue (MB) and ferrous ions (Fe²⁺). Due to the fluorescence of the nanoprobe can be quenched by MB based on inner filter effect, but gradually recover when contact with ·OH, which is generated from the reaction between H₂O₂ and Fe²⁺, we have achieved the detection of Fe²⁺. The detection linear range is from 1.78 to 15.8 μM, and the limit of detection (LOD) is 0.071 μM. Besides, in this process, we also simultaneously realize the detection of MB. The linear range of MB turn-off detection is 0-42.6 μM, and the LOD is 0.41 μM. To our knowledge, no example of using upconversion fluorescence probe for continuous detection of trace MB and Fe²⁺ has been reported for now, and test results are superior compared with most reported Fe²⁺ probes. Moreover, the combinations of upconversion nanoparticles (UCNPs) and the metal-organic frameworks (MOFs) have enhanced the selectivity and sensitivity of the probe towards MB and Fe²⁺. Therefore, we believe the designed upconversion fluorescent nanoprobe is a promising efficient tool in detecting MB and diagnose Fe²⁺ related diseases in the future.

Large-Scale Flexible Surface-Enhanced Raman Scattering (SERS) Sensors with High Stability and Signal Homogeneity

Flexible surface-enhanced Raman scattering (SERS) sensors have attracted great attention as a portable and low-cost device for chemical and bio-detection. However, flexible SERS sensors tend to suffer low signal spatial homogeneity due to the uneven distribution of active plasmonic nanostructures (hot spots) and quick degradation of their sensitivity due to low adhesion of hot spots and flexible substrates during fast sampling. Herein, a large-area (20 × 20 cm²) polyimide (PI)-based SERS sensor is exploited for trace detection with high signal homogeneity and stability. The SERS sensor is constructed from PI through in situ growth of silver and gold core-shell nanoparticles (Ag@Au NPs) based on chemical reduction and galvanic replacement processes. Benefiting from the abundant carboxyl groups on the surface-cleaved PI, densely and uniformly distributed Ag@Au NPs are successfully prepared on the film under ambient conditions. The high Raman enhancement factor (EF) (up to 1.07 × 10⁷) and detection capability with low nanomolar (10^-9 M) detection limits are obtained for this flexible SERS sensor. The uniform Raman signals in the random region show good signal homogeneity with a low variation of 8.7%. Moreover, the flexible SERS sensor exhibited superior efficiency and durability after storage for 30 days even after 500 cycles of mechanical stimuli (bending or torsion). The residue of pesticide thiram (tetramethylthiuram disulfide, TMTD) has been rapidly traced by direct sampling from the apple surface, and a sensitivity of 10 ng/cm² for TMTD was achieved. These findings show that the PI-based SERS sensor is a very strong candidate for broad and simple utilization of flexible SERS for both laboratory and commercial applications in chemical and biomolecule detections.

Ag nanoparticle ink coupled with graphene oxide cellulose paper: a flexible and tunable SERS sensing platform

Surface-enhanced Raman scattering (SERS) is highly promising for ultra-sensitive detection in a series of applications. Although extensive advances have been achieved in SERS technologies, the preparation of highly efficient SERS substrates still suffers from several limitations, including complex preparation procedures, high cost, and instability for long time storage. To address these problems, we report a novel, to the best of our knowledge, SERS platform that combines graphene oxide (GO) and cellulose composite paper with colloidal silver nanoparticle (Ag NP) ink. As an efficient substrate, the GO and cellulose composite paper that features hierarchical micro-nanostructures and improved interaction with target molecules can be fabricated on a large scale, and the Ag NP ink can be well stored, avoiding being oxidized in ambient conditions. In this way, our SERS platform not only reduces the cost, but also improved the stability. The sensitivity, reproducibility, and tunable SERS detection performance were evaluated using rhodamine 6G as probing molecules. To demonstrate the capability of our SERS platform in practical analysis, the SERS spectra of two monosodium salt solutions of different concentrations have been collected. The SERS platform has revealed great potential for practical application of SERS technologies.

Controllable In-Situ Growth of Silver Nanoparticles on Filter Paper for Flexible and Highly Sensitive SERS Sensors for Malachite Green Residue Detection

In this work, a series of highly flexible and sensitive surface-enhanced Raman scattering (SERS) substrates were fabricated by the in-situ growth of silver nanoparticles (AgNPs) on polydopamine (PDA) templated filter papers (FPs), based on mussel-inspired surface chemistry. The obtained FP@PDA@AgNPs strips exhibited high sensitivity and reproducibility with Rhodamine 6G (R6G) probe molecules, with a calculated detection limit of approximately 10-10 M. More critically, these FP@PDA@AgNPs strips could be used as outstanding flexible SERS sensors to quickly collect and detect malachite green (MG) residues on fish scales, crab shells and shrimp skins by a swabbing extraction method. The detection limits for MG residues were calculated to be approximately as low as 0.04635 pg/cm2, 0.06952 pg/cm2 and 0.09270 pg/cm2, respectively. This facile and efficient strategy could to be utilized as a universal approach to fabricating a variety of flexible, cheap and portable SERS sensors for surface contamination analysis, and has great potential in the environmental scientific analysis and food safety monitoring fields.

A functional Au array SERS chip for the fast inspection of pesticides in conjunction with surface extraction and coordination transferring

The fast inspection of the pesticide residues on fruits and vegetables requires the development of facile, sensitive and accurate methods. Surface enhanced Raman scattering (SERS) is a promising way to provide a fast inspection method, which requires significant improvements in the reproducibility and feasibility. In the present work, an SERS method was developed for the fast inspection of pesticides on fruit peels in conjunction with surface extraction and coordination transferring. In this new method, the residual pesticides were directly extracted from fruit peels with an appropriate extraction solution and then quantitatively transferred onto an organic solvent-compatible Au array SERS chip through the strong chemical interactions between the heteroatoms in the pesticides and the gold surface. The functional SERS chip was fabricated by the interfacial assembly of an Au array on a membrane, which produced dense and uniformly distributed SERS hot spots and enabled compatibility with random curvature surfaces and handheld Raman spectrometers. As a proof of concept, sulfur atoms containing thiram on apples were detected at a concentration as low as 5 ng cm-2 with good reproducibility (relative standard deviation lower than 10%). The strong interactions between the sulfur atoms and gold surface during the coordination transferring process were confirmed by the enhanced vibrations of the specified bands occurring in both the Raman and IR spectra. This surface extraction-coordination transferring-based method holds wide applicability for heteroatom-containing pesticides, as demonstrated by the detection of various S- and P-containing pesticides.

Toward Flexible Surface-Enhanced Raman Scattering (SERS) Sensors for Point-of-Care Diagnostics

Surface-enhanced Raman scattering (SERS) spectroscopy provides a noninvasive and highly sensitive route for fingerprint and label-free detection of a wide range of molecules. Recently, flexible SERS has attracted increasingly tremendous research interest due to its unique advantages compared to rigid substrate-based SERS. Here, the latest advances in flexible substrate-based SERS diagnostic devices are investigated in-depth. First, the intriguing prospect of point-of-care diagnostics is briefly described, followed by an introduction to the cutting-edge SERS technique. Then, the focus is moved from conventional rigid substrate-based SERS to the emerging flexible SERS technique. The main part of this report highlights the recent three categories of flexible SERS substrates, including actively tunable SERS, swab-sampling strategy, and the in situ SERS detection approach. Furthermore, other promising means of flexible SERS are also introduced. The flexible SERS substrates with low-cost, batch-fabrication, and easy-to-operate characteristics can be integrated into portable Raman spectroscopes for point-of-care diagnostics, which are conceivable to penetrate global markets and households as next-generation wearable sensors in the near future.