Fabrication of ternary MoS2-polypyrrole-Pd nanotubes as peroxidase mimics with a synergistic effect and their sensitive colorimetric detection of l-cysteine

Fe3O4 nanoparticles entrapped in the inner surfaces of N-doped carbon microtubes with enhanced biomimetic activity

Tubular structured composites have attracted great interest in catalysis research owing to their void-confinement effects. In this work, we synthesized a pair of hollow N-doped carbon microtubes (NCMTs) with Fe3O4 nanoparticles (NPs) encapsulated inside NCMTs (Fe3O4@NCMTs) and supported outside NCMTs (NCMTs@Fe3O4) while keeping other structural features the same. The impact of structural effects on the catalytic activities was investigated by comparing a pair of hollow-structured nanocomposites. It was found that the Fe3O4@NCMTs possessed a higher peroxidase-like activity when compared with NCMTs@Fe3O4, demonstrating structural superiority of Fe3O4@NCMTs. Based on the excellent peroxidase-like catalytic activity and stability of Fe3O4@NCMTs, an ultra-sensitive colorimetric method was developed for the detection of H2O2 and GSH with detection limits of 0.15 μM and 0.49 μM, respectively, which has potential application value in biological sciences and biotechnology.

Interfacing Ag2S Nanoparticles and MoS2 Nanosheets on Polypyrrole Nanotubes with Enhanced Catalytic Performance

The tubular architecture with multiple components can bring synergistic effects to improve the enzyme-like activity of molybdenum-based nanomaterials. Here, a facile polypyrrole (PPy)-protected hydrothermal sulfidation process was implemented to engineer MoS2/Ag2S heterointerfaces encapsulated in one-dimensional (1D) PPy nanotubes with MoO3@Ag nanorods as the self-sacrificing precursor. Notably, the sulfidation treatment led to the generation of MoS2 nanosheets (NSs) and Ag2S nanoparticles (NPs) and the creation of a tubular structure with a "kill three birds with one stone" role. The Ag2S/MoS2@PPy nanotubes showed the synergistic combined effects of Ag2S NPs, MoS2 NSs, and the 1D tube-like nanostructure. Based on the synergistic effects from these multiple components and the tubular structure, Ag2S/MoS2@PPy nanocomposites were used as a colorimetric sensing platform for detecting H2O2. Moreover, the reduction of 4-nitrophenol (4-NP) revealed excellent catalytic activity in the presence of NaBH4 and Ag2S/MoS2@PPy nanocomposites. This work highlights the effects of MoS2/Ag2S heterointerfaces and the hierarchical tubular structure in catalysis, thereby providing a new avenue for reducing 4-NP and the enzyme-like catalytic field.

Synergistically Enhanced Oxidase-like Property of Core-Shell MOF Nanozymes by Decorating Au and Ag/AgCl Nanoparticles for l-Cysteine Colorimetric Sensing

Monitoring l-cysteine (l-Cys) is of importance for human health and food safety. Herein, we designed a novel strategy for bimetallic Au and Ag/AgCl anchoring on Ni-doped ZIF-67 to form core-shell nanocubes (Ni-ZIF-67/AuAg/AgCl) using the galvanic replacement processes. The unique properties of ZIF-67 nanocubes were conducive to generating strong synergistic catalytic effects with Au and Ag/AgCl, particularly when Ni-ZIF-67/AuAg/AgCl composites were employed as oxidase mimics for catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). The Ni-ZIF-67/AuAg/AgCl composites displayed strong affinity toward TMB, displaying a lower Michaelis constant Km value of 0.25 mM and a higher maximum initial rate Vmax of 9 × 10-8 M s-1. By virtue of the nanozyme, the colorimetric sensor was constructed for l-Cys detection with a relatively low detection limit of 0.051 μM. The superior catalytic performance of the as-prepared Ni-ZIF-67/AuAg/AgCl composites can be ascribed to the core-shell structure, large specific surface area, and strong synergistic catalytic effects, which are beneficial for exposing more active sites and enhancing the conductivity to further boost their catalytic activity.

Transition metal-doped germanium oxide nanozyme with enhanced enzyme-like activity for rapid detection of pesticide residues in water samples

Designing highly active nanozymes for bioanalysis and environmental sensing remains a challenge. In this study, transition metal, palladium (Pd) and iron (Fe), doped germanium oxide (GeO₂) nanozyme was designed and optimized. Compared with the pristine GeO₂ nanozyme, the transition metal doped GeO₂ nanozyme have lower Michaelis-Menten constants and higher catalytic activity, indicating that the Pd and Fe doped GeO₂ nanozyme not only enhance their affinity for the substrate but also improve its catalytic activity. In addition, a colorimetric sensor based on the GeO₂@Pd-H₂O₂-TMB system was constructed for the visual detection of simazine in water samples due to the good affinity between TMB and simazine. This sensor has good selectivity and sensitivity with a detection limit of 6.21 μM because of the highest catalytic performance of GeO₂@Pd nanozyme. This study broadens the application of nanozymes in environmental field and other nanozymes can also be enhanced in activity by simple transition metal doping.

π-Conjugated Copper Phthalocyanine Nanoparticles as Highly Sensitive Sensor for Colorimetric Detection of Biomarkers

Though numerous nanomaterials with enzyme-like activities have been utilized as probes and sensors for detecting biological molecules, it is still challenging to construct highly sensitive detectors for biomarkers using polymeric materials. Benefiting from the π-d delocalization effect of electrons, excellent metal-chelating property, high electron transferability, and good chemical stability of π-conjugated phthalocyanine, the design of the copper phthalocyanine-based conjugated polymer nanoparticles (Cu-PcCP NPs) as a colorimetric sensor for a variety of biomarkers is reported. The Cu-PcCP NPs are synthesized through a simple microwave-assisted polymerization, and their chemical structures are thoroughly characterized. The colorimetric results of Cu-PcCP NPs demonstrate excellent peroxidase-like detecting activity and also great substrate selectivity than most of the reported Cu-based nanomaterials. The Cu-PcCP NPs can achieve a detection limit of 4.88 μM for the H₂ O₂ , 4.27 μM for the L-cysteine, and 21.10 μM for the glucose via a cascade catalytic system, which shows comparable detecting sensitivity as that of many earlier reported enzyme-like nanomaterials. Moreover, Cu-PcCP NPs present remarkable resistance to harsh conditions, including high temperature, low pH, and excessive salts. These highly specific π-conjugated copper-phthalocyanine nanoparticles not only overcome the current limitation of polymeric material-based sensors but also provide a new direction for designing next-generation enzyme-like nanomaterial-based colorimetric biosensors.

Molybdenum Disulfide-Based Nanomaterials for Visible-Light-Induced Photocatalysis

Visible-light-responsive photocatalytic materials have a multitude of important applications, ranging from energy conversion and storage to industrial waste treatment. Molybdenum disulfide (MoS₂) and its variants exhibit high photocatalytic activity under irradiation by visible light as well as good stability and recyclability, which are desirable for all photocatalytic applications. MoS₂-based materials have been widely applied in various fields such as wastewater treatment, environmental remediation, and organic transformation reactions because of their excellent physicochemical properties. The present review focuses on the fundamental properties of MoS₂, recent developments and remaining challenges, and key strategies for tackling issues related to the utilization of MoS₂ in photocatalysis. The application of MoS₂-based materials in visible-light-induced catalytic reactions for the treatment of diverse kinds of pollutants including industrial, environmental, pharmaceutical, and agricultural waste are also critically discussed. The review concludes by highlighting the prospects of MoS₂ for use in various established and emerging areas of photocatalysis.

Graphdiyne Oxide Quantum Dots: The Enhancement of Peroxidase-like Activity and Their Applications in Sensing H2O2 and Cysteine

As one of the typical carbon nanomaterials, graphdiyne (GDY) with unique chemical, physical, and electronic properties has a great potential in various fields. Although it is an important member of carbon nanozymes, the research on its intrinsic enzyme mimetic properties and applications is still limited. Herein, graphdiyne oxide quantum dots (GDYO QDs) have been synthesized through oxidative cleavage, which exhibit enhanced peroxidase-like activity with lower K_m and higher V_max than those of most carbon-based nanozymes. The catalytic mechanism is explored, showing that the enhanced catalytic performance is attributed to the good conjugated structure, large number of oxygen-containing groups, and small-sized nanosheets with few layers. As a kind of peroxidase mimetic, the GDY-based nanozyme has excellent potential in sensing H₂O₂ and biological antioxidants through the colorimetric assay, with a linear range from 5 to 500 μM and detection limit of 1.5 μM for H₂O₂ and a linear range from 0 to 90 μM and detection limit of 0.48 μM for l-cysteine. Our work will be beneficial to develop high-performance artificial enzymes and to understand their mechanism for better applications.

Ascorbic Acid Sensor Based on CdS QDs@PDA Fluorescence Resonance Energy Transfer

An ascorbic acid (AA) sensor was constructed based on the fluorescence resonance energy transfer (FRET) between CdS quantum dots (CdS QDs) and polydopamine (PDA) to detect trace AA sensitively. FRET occurred due to the broad absorption spectrum of PDA completely overlapped with the narrow emission spectrum of CdS QDs. The fluorescence of CdS QDs was quenched and in the "off" state. When AA was present, the conversion of DA to PDA was hindered and the FRET disappeared, resulting in the fluorescence of CdS QDs in an "on" state. Importantly, the degree of fluorescence recovery of CdS QDs displayed a desirable linear correlation with the concentration of AA in the range of 5.0-100.0 μmol/L, the linear equation is y=0.0119cAA+0.3113, and the detection limit is 1.16 μmol/L (S/N = 3, n = 9). There was almost no interference with common amino acid, glucose and biological sulfhydryl small molecules to AA. Trace amount of AA in vitamin C tablets were determined and satisfactory results were obtained; the recoveries were observed to be 98.01-100.7%.

Ultrasensitive Pd nano catalyst as peroxidase mimetics for colorimetric sensing and evaluation of antioxidants and total polyphenols in beverages and fruit juices

Herein, we developed a new Pd NP from the aq extract of Elsholtzia blanda Benth. flower that showed efficient peroxidase mimetic activity. The catalytic mechanism was confirmed through colorimetric analysis. The optimizations of temperature, concentration, P^H and time were done to find out the best procedure to implement the intrinsic catalytic activity in practical applications. Michaelis-Menten constants were evaluated for both TMB and H₂O₂ substrate to investigate the affinity of Pd NP towards them. K_m was observed to be 42.35 mM for H₂O₂ and 0.0076 mM for TMB. Antioxidants were sensed using the peroxidase mimetic property up to nanomolar levels with a LOD = 0.78 nM for Gallic acid 0.85 nM for Tannic acid. The method was further implemented in comparing the radical scavenging power of different phenolic compounds. Smart-phone based analysis was done for observing the change in colour which could further be utilized as an analytical tool for study the antioxidant activity. R-Square values of 0.97 and 0.96 for detection of gallic acid and tannic acid respectively suggest good linearity of the plot. Lastly, the system was utilized in the evaluation of total antioxidant capacity (TAC) and total phenolic content (TPC) in commercially available juices and beverages.

Molybdenum Disulfide-Based Nanoprobes: Preparation and Sensing Application

The use of nanoprobes in sensors is a popular way to amplify their analytical performance. Coupled with two-dimensional nanomaterials, nanoprobes have been widely used to construct fluorescence, electrochemical, electrochemiluminescence (ECL), colorimetric, surface enhanced Raman scattering (SERS) and surface plasmon resonance (SPR) sensors for target molecules' detection due to their extraordinary signal amplification effect. The MoS₂ nanosheet is an emerging layered nanomaterial with excellent chemical and physical properties, which has been considered as an ideal supporting substrate to design nanoprobes for the construction of sensors. Herein, the development and application of molybdenum disulfide (MoS₂)-based nanoprobes is reviewed. First, the preparation principle of MoS₂-based nanoprobes was introduced. Second, the sensing application of MoS₂-based nanoprobes was summarized. Finally, the prospect and challenge of MoS₂-based nanoprobes in future were discussed.

Pd-Fe3O4 Janus nanozyme with rational design for ultrasensitive colorimetric detection of biothiols

Although nanozyme-based colorimetric assays have been broadly used for biosensing, some limitations such as low catalytic activity of nanozyme, poor sensitivity to analytes and lack of understanding the structure-activity relationship remain unsolved. In this work, we developed an ultrasensitive colorimetric method for biothiols detection based on density functional theory-assisted design of janus Pd-Fe₃O₄ nanozyme. The Pd-Fe₃O₄ dumbbell-like nanoparticles (DBNPs) prepared by seed-mediated approach shows a uniform heterodimeric nanostructure. Ultrasensitive biothiols detection is achieved from two aspects. On one hand, due to the synergistic effect between Pd and Fe₃O₄ in the dumbbell structure, Pd-Fe₃O₄ DBNPs show enhanced peroxidase-mimic activity compared to the individual components. On the other hand, when the target biothiols molecule is present, its inhibition effect on the janus Pd-Fe₃O₄ nanozyme is also significantly enhanced. The above results are confirmed both in experiment and theoretical calculation. Based on the rational design, a simple, highly selective and urtrasensitive colorimetric and quantitative assay for biothiols is developed. The limit of detection (LOD) can reach as low as 3.1 nM in aqueous solution. This assay is also successfully applied to the detection of biothiols in real urine samples. Moreover, the Pd-Fe₃O₄ nanozyme is used to discriminate biothiols levels in normal and cancer cells with high sensitivity at the cell density of 15,000/mL, which demonstrates its great potential in biological and clinical analysis. This work not only shows the great promise of janus bimetallic nanozymes' excellent functionalities but also provides rational guidelines to design high-performance nanozymes for biosensing and biomedical applications.

Pd-Immobilized Schiff Base Double-Layer Macrocycle: Synthesis, Structures, Peroxidase Mimic Activity, and Antibacterial Performance

Di-, tri-, and tetra-aldehydes have been employed to access new [2 + 2] [2 + 3] and [2 + 4] double-layer Schiff base macrocycles. The [2 + 3] compound has been used for the immobilization of Pd and the resulting composite has been employed as a peroxidase-like mimetic using 3,3',5,5'-tetramethylbenzidine (TMB) as the substrate; the optimum conditions together with the catalytic kinetics of the enzyme-like activity is discussed. Based on the peroxidase-like catalytic activity, the Pd@Schiff base composite was found to exhibit excellent bactericidal activity against both Escherichia coli (Gram-negative bacterium) and Staphylococcus aureus (Gram-positive bacterium) in the presence of relatively low concentrations of H₂O₂. Furthermore, cytotoxicity measurements illustrate the biosafety of the Pd composite. The above-mentioned findings have the potential to guide the innovation of new Pd-based composites as enzyme mimetics and antibacterial materials.

Fe doped MoS2/polypyrrole microtubes towards efficient peroxidase mimicking and colorimetric sensing application

Molybdenum disulfide (MoS₂) nanosheets have been found to exhibit intrinsic peroxidase-like activity that could be applied in colorimetric sensing platforms. However, their poor conductivity and few exposed edge sites often lead to poor catalytic activity, impeding the application of MoS₂ nanosheets in enzyme-like catalysis. Here, a novel strategy was developed to selectively deposit Fe-doped MoS₂ nanosheets on polypyrrole microtubes to obtain Fe-MoS₂@PPy microtubes to address these issues. In the synthesized Fe-MoS₂@PPy microtubes, PPy microtubes can not only be used as a conductive support to promote the electron transfer, but also greatly alleviate the aggregations of MoS₂ nanosheets, and thus improve the enzyme-like activity. Meanwhile, additional active sites, formed by Fe doping, also endow the catalyst with excellent activity in enzyme-like catalysis. Notably, in the process of sulfidation, the dissolution, redistribution and diffusion result in the disappearance of MoO₃@FeOOH cores and the formation of Fe doped MoS₂ nanosheets, which significantly facilitate the deposition of Fe-doped MoS₂ nanosheets on PPy microtubes. On the basis of the high peroxidase-like catalytic efficiency of the Fe-MoS₂@PPy microtubes, a simple and convenient colorimetric strategy for the rapid and sensitive detection of L-cysteine has been developed. This strategy introduces both the PPy layer and Fe doping to increase the conductivity and the density of active sites of MoS₂ nanosheets, thus enhancing the catalytic activity and stability. More importantly, Fe-MoS₂@PPy microtubes could be used as a good support for loading other materials such as Au and Ag nanoparticles (NPs), forming ternary Fe-MoS₂/Ag, Au@PPy nanotubes. This work offers an opportunity to develop low-cost and highly active MoS₂-based nanocomposites for promising potential applications in electrochemical energy conversion and medical diagnostics.

Keratin-inorganic hybrid nanoflowers decorated with Fe3O4 nanoparticles as enzyme mimics for colorimetric detection of glucose

Fe₃O₄ magnetic nanoparticles (MNPs) are highly active enzyme-like catalysts. However, low stability is still a big challenge for Fe₃O₄-based enzyme mimics because the Fe₃O₄ MNPs can be easily dissolved when exposed to acidic conditions. Inspired by the numerous catalytic sites of a flower-like structure and the biological functions of amino acids in structural proteins, herein, by employing keratin as a protein component, stable Fe₃O₄-based MNP embedded keratin-Cu₃(PO₄)₂ nanoflowers were constructed, from which hierarchical nanostructures with a three-dimensional petal-like morphology were selected for subsequent studies owing to their excellent enzymic catalytic activity. The keratin-nanoflower@Fe₃O₄ exhibited significantly enhanced catalytic activity compared with that of keratin-Cu₃(PO₄)₂ nanoflowers and individual Fe₃O₄ MNPs. Remarkably, keratin-nanoflower@Fe₃O₄ exhibited superior long-term stability to Fe₃O₄ MNPs under more acidic conditions and favorable reusability. This method has been successfully exploited for the colorimetric determination of glucose in human serum with satisfactory sensitivity and specificity, offering a novel approach for glucose detection.

Hollow POM@MOF-derived Porous NiMo6 @Co3 O4 for Biothiol Colorimetric Detection

Developing highly active and sensitive peroxidase mimics for _L -cysteine (_L -Cys) colorimetric detection is very important for biotechnology and medical diagnosis. Herein, polyoxometalate-doped porous Co₃ O₄ composite (NiMo₆ @Co₃ O₄ ) was designed and prepared for the first time. Compared with pure and commercial Co₃ O₄ , NiMo₆ @Co₃ O₄ (n) composites exhibit the enhanced peroxidase-mimicking activities and stabilities due to the strong synergistic effect between porous Co₃ O₄ and multi-electron NiMo₆ clusters. Moreover, the peroxidase-mimicking activities of NiMo₆ @Co₃ O₄ (n) composites are heavily dependent on the doping mass of NiMo₆ , and the optimized NiMo₆ @Co₃ O₄ (2) exhibits the superlative peroxidase-mimicking activity. More importantly, a sensitive _L -Cys colorimetric detection is developed with the sensitivity of 0.023 μM^-1 and the detection limit at least 0.018 μM in the linear range of 1-20 μM, which is by far the best enzyme-mimetic performances, to the best our knowledge.

2D Co-MOF nanosheet-based nanozyme with ultrahigh peroxidase catalytic activity for detection of biomolecules in human serum samples

A two-dimensional (2D) Co-MOF nanosheet-based nanozyme was developed for colorimetric detection of disease-related biomolecules. The prepared 2D Co-MOFs exhibited ultrahigh peroxidase catalytic activity. 2D Co-MOFs can catalyze the oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to the blue product oxTMB, accompanying an obvious change of absorption value at 652 nm. However, alkaline phosphatase can catalyze the hydrolysis of L-ascorbic acid-2-phosphate to produce ascorbic acid which can reduce the oxTMB to TMB, resulting in an obvious color fading. Therefore, by recording the change of absorption value at 652 nm, the 2D Co-MOF nanosheets were used to detect ascorbic acid (AA) and alkaline phosphatase (ALP). The limit of detection for AA and ALP was 0.47 μM and 0.33 U L^-1, respectively. The limit of quantification for AA and ALP was 1.56 μM and 1.1 U L^-1, respectively. The developed nanozyme was successfully used to determine alkaline phosphatase in clinical human serum samples and the results were consistent with those provided by the hospital. Furthermore, by integrating 2D Co-MOF nanosheets with image recognition and data processing function fixed on a smartphone, a portable test of ascorbic acid was reached. Schematic presentation of the preparation of two-dimensional Co-MOF nanosheet-based nanozyme and their application in portable detection of biomolecules.

Electronic coupling between molybdenum disulfide and gold nanoparticles to enhance the peroxidase activity for the colorimetric immunoassays of hydrogen peroxide and cancer cells

Peroxidase nanoenzymes exhibit a specific affinity toward substrates, thereby demonstrating application potential for realizing the colorimetric immunoassays of hydrogen peroxide (H₂O₂), which can be further used as a probe for imaging cancer cells. To enhance the intrinsic peroxidase activity of molybdenum sulfide (MoS₂) nanomaterials, gold (Au) nanoparticles with an average diameter of approximately 2.1 nm were modified on a MoS₂/carbon surface (denoted as MoS₂/C-Au₆₀₀) via ascorbic acid reduction. MoS₂/C-Au₆₀₀ can oxidize 3,3',5,5'-tetramethylbenzidine (TMB) to generate a blue oxidation product in the presence of H₂O₂; this product exhibits peroxidase-like activities, superior to those of most existing MoS₂-based nanoenzymes. Furthermore, MoS₂/C-Au₆₀₀ exhibits a high detection capability for H₂O₂ in the range of 1 × 10^-5 to 2 × 10^-4 mol/L (R² = 0.99), and the lowest detection limit is 1.82 µmol/L in a sodium acetate and acetic acid buffer solution. Steady state kinetics studies indicate that the catalytic mechanism is consistent with the ping-pong mechanism. Given its strong absorption peak at 652 nm in the visible region, MoS₂/C-Au₆₀₀ can be used to image cancer cells due to the enhanced permeability and retention effect. Our findings demonstrate that the synergistic electronic coupling between multiple components can enhance the peroxidase activity, which can facilitate the development of an effective, facile, and reliable method to perform colorimetric immunoassays of H₂O₂ and cancer cells.

An Au@NH2-MIL-125(Ti)-based multifunctional platform for colorimetric detections of biomolecules and Hg2+

Au@NH₂-MIL-125(Ti) was fabricated and explored as a multifunctional platform for sensitive colorimetric detections of biomolecules and Hg²⁺.

Fabrication of noble metal nanoparticles decorated on one dimensional hierarchical polypyrrole@MoS2 microtubes

Herein, we present a facile strategy to fabricate noble metal (Ag, Au, Pd) decorated on PPy@MoS₂ microtubes. As a proof of application, the ternary PPy@MoS₂@Au hybrids reveal excellent enzyme-like catalytic performance.

Fabrication of polyethyleneimine-functionalized reduced graphene oxide-hemin-bovine serum albumin (PEI-rGO-hemin-BSA) nanocomposites as peroxidase mimetics for the detection of multiple metabolites

The ultrasensitive bioassays are increasingly demanded for disease diagnosis and environmental monitoring. The combined unique natures of the components in nanocomposites have led to their wide applications in bioanalysis. In the current study, a simple strategy for preparing polyethyleneimine-functionalized reduced graphene oxide-hemin-bovine serum albumin (PEI-rGO-Hemin-BSA) nanocomposites as peroxidase mimetics was demonstrated. The developed nanocomposites of PEI-rGO-Hemin-BSA showed an excellent peroxidase-like activity. Importantly, through the glutaradelhyde crosslinking, PEI-rGO-Hemin-BSA could be further simply combined with various oxidases such as glucose oxidase, cholesterol oxidase, lactate oxidase and choline oxidase for the detection and quantitative measurement of multiple metabolites including glucose, cholesterol, l-lactate, and choline. The developed detection strategy, which is sensitive, convenient, low-costed, and in tiny sample consumption, could be expected wide applications in the disease diagnosis and management of metabolite disorders.

Nanozymes: Classification, Catalytic Mechanisms, Activity Regulation, and Applications

Because of the high catalytic activities and substrate specificity, natural enzymes have been widely used in industrial, medical, and biological fields, etc. Although promising, they often suffer from intrinsic shortcomings such as high cost, low operational stability, and difficulties of recycling. To overcome these shortcomings, researchers have been devoted to the exploration of artificial enzyme mimics for a long time. Since the discovery of ferromagnetic nanoparticles with intrinsic horseradish peroxidase-like activity in 2007, a large amount of studies on nanozymes have been constantly emerging in the next decade. Nanozymes are one kind of nanomaterials with enzymatic catalytic properties. Compared with natural enzymes, nanozymes have the advantages such as low cost, high stability and durability, which have been widely used in industrial, medical, and biological fields. A thorough understanding of the possible catalytic mechanisms will contribute to the development of novel and high-efficient nanozymes, and the rational regulations of the activities of nanozymes are of great significance. In this review, we systematically introduce the classification, catalytic mechanism, activity regulation as well as recent research progress of nanozymes in the field of biosensing, environmental protection, and disease treatments, etc. in the past years. We also propose the current challenges of nanozymes as well as their future research focus. We anticipate this review may be of significance for the field to understand the properties of nanozymes and the development of novel nanomaterials with enzyme mimicking activities.

Functional nanomaterials with unique enzyme-like characteristics for sensing applications

We highlight the recent developments in functional nanomaterials with unique enzyme-like characteristics for sensing applications.

Cu@Au(Ag)/Pt nanocomposite as peroxidase mimic and application of Cu@Au/Pt in colorimetric detection of glucose and l-cysteine

Nanomaterial-based artificial peroxidase has attracted extensive interests due to their distinct advantages over natural counterpart. Cu@Au/Pt and Cu@Ag/Pt nanocomposite with rambutan-like structure were prepared and discovered to function like peroxidase, which was illustrated by catalyzing the oxidation reaction of 3,3′,5,5′-tetramethylbenzidine (TMB) accompanied with a blue color change. Steady-state investigation indicates that the catalytic kinetics of Cu@Au/Pt and Cu@Ag/Pt all followed typical Michaelis–Menten behaviors and Cu@Au/Pt showed a strong affinity for H₂O₂, while Cu@Ag/Pt showed strong affinity for TMB. The color change and absorbance intensity strongly depend on the concentration of H₂O₂, thus the direct determination of H₂O₂ and indirect detection of glucose were demonstrated using Cu@Au/Pt with a detection limit of 1.5 μM and 6 μM, respectively. What is more important, the method was applied for detection of glucose in 50% fetal bovine serum with a detection limit of 80 μM, which is much lower than the lowest glucose content in blood for diabetes (7 mM). Moreover, the Cu@Au/Pt nanocomposite were also successfully applied for sensing l-cysteine because of the inhibition effect. Considering the good peroxidase-like activity and novel structure, Cu@Au(Ag)/Pt is expected to have a wide range of applications in bioassays and biocatalysis.

Cu@Au(Ag)/Pt nanocomposite possess good peroxidase-like activity and can be used for detection of glucose and l-cysteine.