Sensitive DNA detection by polymerase chain reaction with gold nanoparticles

Electrochemical biosensor for sensitive detection of SARS-CoV-2 gene fragments using Bi2Se3 topological insulator

In this study, we have designed an electrochemical biosensor based on topological material Bi2Se3 for the sensitive detection of SARS-CoV-2 in the COVID-19 pandemic. Flake-shaped Bi2Se3 was obtained directly from high-quality single crystals using mechanical exfoliation, and the single-stranded DNA was immobilized onto it. Under optimal conditions, the peak current of the differential pulse voltammetry method exhibited a linear relationship with the logarithm of the concentration of target-complementary-stranded DNA, ranging from 1.0 × 10-15 to 1.0 × 10-11 M, with a detection limit of 3.46 × 10-16 M. The topological material Bi2Se3, with Dirac surface states, enhanced the signal-to-interference plus noise ratio of the electrochemical measurements, thereby improving the sensitivity of the sensor. Furthermore, the electrochemical sensor demonstrated excellent specificity in recognizing RNA. It can detect complementary RNA by amplifying and transcribing the initial DNA template, with an initial DNA template concentration ranging from 1.0 × 10-18 to 1.0 × 10-15 M. Furthermore, the sensor also effectively distinguished negative and positive results by detecting splitting-synthetic SARS-CoV-2 pseudovirus with a concentration of 1 copy/μL input. Our work underscores the immense potential of the electrochemical sensing platform based on the topological material Bi2Se3 in the detection of pathogens during the rapid spread of acute infectious diseases.

Gold nanoparticles-based biosensors: pioneering solutions for bacterial and viral pathogen detection-a comprehensive review

Gold Nanoparticles (AuNPs) have gained significant attention in biosensor development due to their unique physical, chemical, and optical properties. When incorporated into biosensors, AuNPs offer several advantages, including a high surface area-to-volume ratio, excellent biocompatibility, ease of functionalization, and tunable optical properties. These properties make them ideal for the detection of various biomolecules, including proteins, nucleic acids, and bacterial and viral biomarkers. Traditional methods for detecting bacteria and viruses, such as RT-PCR and ELISA, often suffer from complexities, time consumption, and labor intensiveness. Consequently, researchers are continuously exploring novel devices to address these limitations and effectively detect a diverse array of infectious pathogenic microorganisms. In light of these challenges, nanotechnology has been instrumental in refining the architecture and performance of biosensors. By leveraging advancements in nanomaterials and strategies of biosensor fabrication the sensitivity and specificity of biosensors can be enhanced, enabling more precise detection of pathogenic bacteria and viruses. This review explores the versatility of AuNPs in detecting a variety of biomolecules, including proteins, nucleic acids, and bacterial and viral biomarkers. Furthermore, it evaluates recent advancements in AuNPs-based biosensors for the detection of pathogens, utilizing techniques such as optical biosensors, lateral flow immunoassays, colorimetric immunosensors, electrochemical biosensors, and fluorescence nanobiosensors. Additionally, the study discusses the existing challenges in the field and proposes future directions to improve AuNPs-based biosensors, with a focus on enhancing sensitivity, selectivity, and their utility in clinical and diagnostic applications.

Sensitive detection of microRNA by dynamic light scattering based on DNAzyme walker-mediated AuNPs self-assembly

As an important biomarker, microRNAs (miRNAs) play an important role in gene expression, and their detection has attracted increasing attention. In this study, a DNAzyme walker that could provide power to perform autonomous movement was designed. Based on the continuous mechanical motion characteristics of DNAzyme walker, a miRNA detection strategy for the self-assembly of AuNPs induced by the hairpin probe-guided DNAzyme walker "enzyme cleavage and walk" was established. In this strategy, DNAzyme walker continuously cleaved and walked on the hairpin probe on the surface of AuNPs to induce the continuous shedding of some segments of the hairpin probe. The remaining hairpin sequences on the surface of the AuNP pair with each other, causing the nanoparticles to self-assemble. This strategy uses the autonomous movement mechanism of DNAzyme walker to improve reaction efficiency and avoid the problem of using expensive and easily degradable proteases. Secondly, using dynamic light scattering technology as the signal output system, ultra-sensitive detection with a detection limit of 3.6 fM is achieved. In addition, this strategy has been successfully used to analyze target miRNAs in cancer cell samples.

Multifunctional one-droplet microfluidic chemosensing of ractopamine in real samples: a user-oriented flexible nano-architecture for on-site food and pharmaceutical analysis using optical sensors

Illegal use of ractopamine (RAC) in the food industry has dire consequences for health which should be curbed by inexpensive on-site checks. In this study, four advanced nanostructures of AuNPs were examined for this purpose. For the first time, a novel cost-effective colorimetric opto-sensor based on gold nanoparticles in aqueous solution was developed and successfully utilized for the recognition of RAC in real samples. The colorimetric chemosensor based on AuNPs-CysA exhibited a linear range of 0.1 μM to 0.01 M with a limit of detection (LOD) of 0.001 μM. Also, using AuNPs-DDT as a photonic probe two ranges of linearity of 0.01 to 50 μM and 0.005 to 0.01 M were obtained (LOD = 1 nM). The outstanding features of the utilized nanostructures are the simple preparation, the suitable stability of AuNPs-CysA and the excellent selectivity of AuNPs-DDT toward RAC recognition. Finally, the engineered colorimetric systems were combined with a simple and inexpensive optimized microfluidic glass fiber-based device. This work paves the way for devising inexpensive and efficient on-site recognition devices for food safety checks.

Plasmonic Cross-Linking Colorimetric PCR for Simple and Sensitive Nucleic Acid Detection

Simple, low-cost, and accurate nucleic acid assay platforms hold great promise for point-of-care (POC) pathogen detection, disease surveillance, and control. Plasmonic photothermal polymerase chain reaction (PPT-PCR) is a powerful and efficient nucleic acid amplification technique, but it lacks a simple and convenient analysis method for POC applications. Herein, we propose a novel plasmonic cross-linking colorimetric PCR (PPT-ccPCR) assay by integrating plasmonic magnetic nanoparticle (PMN)-based PPT-PCR with gold nanoparticle (AuNP)-based cross-linking colorimetry. AuNPs form assembled structures with the PMNs in the presence of amplicons and collect in a magnetic field, resulting in color changes to the supernatant. Target DNA with concentrations as low as 5 copies/μL can be visually detected within 40 min. The achieved limit of detection was 1.8 copies/μL based on the absorption signals. This simple and sensitive strategy needs no expensive instrumentation and demonstrates high potential for POC detection while enabling further applications in clinical diagnostics.

Robust Rules for Optimal Colorimetric Sensing Based on Gold Nanoparticle Aggregation

Spurred by outstanding optical properties, chemical stability, and facile bioconjugation, plasmonic metals have become the first-choice materials for optical signal transducers in biosensing. While the design rules for surface-based plasmonic sensors are well-established and commercialized, there is limited knowledge of the design of sensors based on nanoparticle aggregation. The reason is the lack of control over the interparticle distances, number of nanoparticles per cluster, or multiple mutual orientations during aggregation events, blurring the threshold between positive and negative readout. Here we identify the geometrical parameters (size, shape, and interparticle distance) that allow for maximizing the color difference upon nanoparticle clustering. Finding the optimal structural parameters will provide a fast and reliable means of readout, including unaided eye inspection or computer vision.

The Integration of Gold Nanoparticles with Polymerase Chain Reaction for Constructing Colorimetric Sensing Platforms for Detection of Health-Related DNA and Proteins

Polymerase chain reaction (PCR) is the standard tool in genetic information analysis, and the desirable detection merits of PCR have been extended to disease-related protein analysis. Recently, the combination of PCR and gold nanoparticles (AuNPs) to construct colorimetric sensing platforms has received considerable attention due to its high sensitivity, visual detection, capability for on-site detection, and low cost. However, it lacks a related review to summarize and discuss the advances in this area. This perspective gives an overview of established methods based on the combination of PCR and AuNPs for the visual detection of health-related DNA and proteins. Moreover, this work also addresses the future trends and perspectives for PCR-AuNP hybrid biosensors.

Electrochemical DNA Biosensors Based on the Intrinsic Topological Insulator BiSbTeSe2 for Potential Application in HIV Determination

In this work, we reported a sensitive, label-free electrochemical biosensor based on the intrinsic topological insulator (TI) BiSbTeSe₂ for potential application in the determination of the HIV gene. With strong spin-obit coupling, TIs could have robust surface states with low electronic noise, which might be beneficial for the stable and sensitive electron transport between the electrode and electrolyte interface. Under optimized conditions of the biosensors using BiSbTeSe₂, the differential pulse voltammetry (DPV) peak currents showed a linear relationship with the logarithm of target DNA concentrations ranging from 1.0 × 10^-13 to 1.0 × 10^-7 M, with a detection limit of 1.07 × 10^-15 M. The sensing assay also displayed good selectivity and stability after storage at 4 °C for 7 days. This work provides an effective way to develop biosensors with topological materials, which have a potential application in the clinical determination and monitoring field.

Detection of Lysyl Oxidase Activity in Tumor Extracellular Matrix Using Peptide-Functionalized Gold Nanoprobes

Simple Summary

Although various malignant tumors express high levels of lysyl oxidase (LOX) and though its role in tumor progression is well-defined, there is a lack of sensing techniques to target LOX. This study highlights the application of peptide-functionalized gold nanoprobes for sensing the LOX levels in tumor microenvironments. The gold nanoparticles (AuNPs) in these nanoprobes aggregate upon exposure to LOX, resulting in a red shift of the surface plasmon resonance peak, accompanied by a characteristic color change. This colorimetric assay based on peptide-functionalized AuNP sensitively detects LOX secreted from various cancer cells not only in vitro but also in the tissue extract. In this study, the suggested analytical approach demonstrated high specificity to LOX and did not show any color change in the presence of other enzymes.

Abstract

High LOX levels in the tumor microenvironment causes the cross-linking of extracellular matrix components and increases the stiffness of tumor tissue. Thus, LOX plays an important role in tumorigenesis and in lowering the tumor response to anticancer drugs. Despite comprehensive efforts to identify the roles of LOX in the tumor microenvironment, sensitive and accurate detection methods have not yet been established. Here, we suggest the use of gold nanoparticles functionalized with LOX-sensitive peptides (LS-AuNPs) that aggregate upon exposure to LOX, resulting in a visual color change. LOX-sensitive peptides (LS-peptides) contain lysine residues that are converted to allysine in the presence of LOX, which is highly reactive and binds to adjacent allysine, resulting in the aggregation of the AuNPs. We demonstrated that the synthesized LS-AuNPs are capable of detecting LOX sensitively, specifically both in vitro and in the tissue extract. Moreover, the suggested LS-AuNP-based assay is more sensitive than commonly employed assays or commercially available kits. Therefore, the LS-AuNPs developed in this study can be used to detect LOX levels and can be further used to predict the stiffness or the anticancer drug resistance of the tumor.

Rapid and low-cost amplicon visualization for nucleic acid amplification tests using magnetic microbeads

This study presents a rapid and low-cost amplicon detection method in which amplicons are attached to magnetic microbeads, suspended in deionized water, and subjected to a magnetic field on a hydrophilic surface resulting in the circular agglomeration of amplicon-conjugated microbeads, visible to the naked eye.

Dynamic light scattering and fluorescence dual-signal sensing of cancer antigen-125 via recognition of the polymerase chain reaction product with gold nanoparticle probe

Cancer antigen 125 (CA - 125) is an important biomarker for the diagnosis of ovarian cancer. In this paper, oligonucleotide 5'-GACAGGCCCGAAGGAATAGATAATACGACTCACTATAGGGAGACAAGAATAAACGCTCAA-3' (oligo 1) contains an aptamer of CA - 125, and was designed partly complementary to oligonucleotide 5'-CTCTCTCTCCACCTTCTTCTTTGAGCGTTTATTCTTGTCT-3' (oligo 2). Oligo 1 · oligo 2 was extended with the Klenow fragment (exo^-) polymerase for further polymerase chain reaction (PCR) processes in the presence of two primers: deoxyribose nucleoside triphosphate and Taq polymerase. Single-stranded DNA was produced at two sides of the PCR product by introducing a C₁₈ spacer into the two primers, which could hybridize with AuNPs-DNA probes, investigated by dynamic light scattering and fluorescence. The addition of CA - 125 can interrupt the hybridization between oligo 1 and oligo 2, causing the average diameter of AuNPs-DNA probes to decrease with the increase of CA-125 within the range of 5 fg mL^-1 - 50 ng mL^-1. The linear regression equation of this relationship was D = 430.48-49.60 log₁₀C, with a detection limit of 1.1 fg mL^-1. Fluorescein molecules were modified at the end of the forward primer. The fluorescence intensity of the PCR product can be measured simultaneously, with the fluorescence intensity increasing linearly with the logarithm of CA-125 concentration within a linear range from 10 fg mL^-1 to 50 ng mL^-1, with a detection limit of 1.5 fg mL^-1.

Visual detection of in vitro nucleic acid replication by submicro- and nano-sized materials

The rapid growth of in vitro nucleic acid replication has offered a powerful tool for clinical diagnosis, food safety detection and environmental monitorning. Successful implementation of various isothermal nucleic acid amplification methods enables rapid replication of target sequences without the participant of a thermal cycler. Point-of-need analysis possesses great superiorities in user-friendly, instant results analysis, low manufacturing, and consumable costs. To meet the great challenge of point-of-need analysis, developing simple and rapid visual methods becomes crucial. Submicro- and nanomaterials possess unique surface properties, which enables their rapid response to DNA amplicons. Their unique optical, magnetic, catalytic, and other physical/chemical properties have been frequently employed for the visual detection of in vitro nucleic acid replications. Herein, we aim to review the submicro- and nanomaterials-based visual methods for detection of nucleic acid amplification. The visual methods are classified according to the designing strategies (e.g. LSPR, bridging flocculation, luminescence, catalytic reaction, separation, etc.). The basic principles, merits and drawbacks of each strategy are described. The application in analysis of nucleic acid targets and non-nucleic acid targets are discussed. The main challenges and future research directions are also highlighted in this rapidly emerging field.

Intramolecular photoinitiator induced atom transfer radical polymerization for electrochemical DNA detection

A novel electrochemical biosensor was reported for the first time to achieve highly sensitive DNA detection based on photoinduced atom transfer radical polymerization (photoATRP). In this work, PNA was applied as the capture probe to specifically recognize the target DNA (TDNA), and we utilized lung cancer DNA as TDNA. The ATRP initiator was introduced to the electrode surface via phosphate-Zr4+-carboxylate chemistry. PhotoATRP was activated under blue light irradiation based on a photoinitiator I2959, which produced free radicals via homolytic cleavage. Subsequently, Cu2+ was reduced to Cu+ with the assistance of the free radicals, and numerous electroactive probes were grafted onto the electrode surface. Under optimal conditions, the limit of detection (LOD) of this method was 3.16 fM (S/N = 3, R2 = 0.992), and the linear range was from 10 fM to 1.0 nM. More importantly, the preparation process of this biosensor was simple and less laborious with a low background signal, suggesting good potential in practical applications.

The efficiency of technologies used for epidemiological characterization of Listeria monocytogenes isolates: an update

The characterization of pathogenic bacteria by providing information regarding the identification and source-tracking of the causes of outbreaks is vital for the epidemiological investigations of foodborne diseases. The knowledge of transmission of Listeria monocytogenes (L. monocytogenes) strains from the environment, directly or indirectly (through food processing facilities) to the final food products, due to the complexity of evaluating numerous, affecting parameters is quite limited. The food trade globalization also adds difficulties in tracking the association between the infection occurrence and causative pathogens, aiming to prevent their spread. The occurrence of listeriosis, a notifiable disease throughout the world, can either be sporadic or outbreak-related. Due to the importance of foodborne outbreaks from a public health aspect and its correspondence enormous economic losses, cross-linked surveillance studies regarding the contamination of foods by L. monocytogenes, besides identifying clusters and tracing the sources of infections on an international-scale to prevent and control L. monocytogenes outbreaks sounds very crucial. Contrary to the conventional typing methods, molecular-based techniques, such as whole-genome sequencing, owing to the capacity to discriminate L. monocytogenes strains down to single nucleotide differences, provide an accurate characterization of strains and tracking the causes of outbreaks. However, routinely using molecular-based methods depends on the required improvements in the affordability, proper timing, and preparing reliable, standardized bioinformatics facilities. This work was conducted to critically review the practical potential of diverse typing methods have been used for the characterization of L. monocytogenes and discuss how they might change the future of efforts for control of listeriosis.

Applications of gold nanoparticles in ELISA, PCR, and immuno-PCR assays: A review

Development of state-of-the-art assays for sensitive and specific detection of disease biomarkers has received significant interest for early detection and prevention of various diseases. Enzyme Linked Immunosorbent assays (ELISA) and Polymerase Chain Reaction (PCR) are two examples of proteins and nucleic acid detection assays respectively, which have been widely used for the sensitive detection of target analytes in biological fluids. Recently, immuno-PCR has emerged as a sensitive detection method, where high specificity of sandwich ELISA assays is combined with high sensitivity of PCR for trace detection of biomarkers. However, inherent disadvantages of immuno-PCR assays limit their application as rapid and sensitive detection method in clinical settings. With advances in nanomaterials, nanoparticles-based immunoassays have been widely used to improve the sensitivity and simplicity of traditional immunoassays. Owing to facile synthesis, surface functionalization, and superior optical and electronic properties, gold nanoparticles have been at the forefront of sensing and detection technologies and have been extensively studied to improve the efficacies of immunoassays. This review provides a brief history of immuno-PCR assays and specifically focuses on the role of gold nanoparticles to improve the sensitivity and specificity of ELISA, PCR and immuno-PCR assays.

DNA circuits driven by conformational changes in DNAzyme recognition arms

DNA computing plays an important role in nanotechnology due to the unique programmability and parallelism of DNA molecules. As an important tool to realize DNA computation, various logic computing devices have great application potential. The application of DNAzyme makes the achievements in the field of logical computing more diverse. In order to improve the efficiency of the logical units run by DNAzyme, we proposed a strategy to regulate the DNA circuit by the conformational change of the E6-type DNAzyme recognition arms driven by Mg2+. This strategy changes the single mode of DNAzyme signal transmission, extends the functions of E6-type DNAzyme, and saves the time of signal transmission in the molecular scale. To verify the feasibility of this strategy, first, we constructed DNA logic gates (YES, OR, and AND). Second, we cascade different logic gates (YES-YES, YES-AND) to prove the scalability. Finally, a self-catalytic DNA circuit is established. Through the experimental results, we verified that this DNAzyme regulation strategy relatively reduces the cost of logic circuits to some extent and significantly increases the reaction rate, and can also be used to indicate the range of Mg2+ concentrations. This research strategy provides new thinking for logical computing and explores new directions for detection and biosensors.

Gold nanostructures for the sensing of pH using a smartphone

Recently, metal nanostructures have been found to be capable of recognizing small changes in their surrounding environment, which can be utilized as significant sensing tools. In this study, we demonstrated colorimetric sensing of pH by gold nanostructures (GNs) using a simple smartphone. An indigenously developed Android app based on the CIELab 1931 analysis, which could run in a smartphone, was used for the precise determination of the pH value of liquid media. The pH value of an unknown solution obtained from the developed Android app was also compared with that obtained from the conventional ratiometric technique and a commercial pH meter. In another endeavor, it was found that the synthesized GNs demonstrated a high energy transfer efficiency from a donor (namely, the rhodamine 6G, (Rh 6G)) dye. This property of the GNs can be utilized further in the future for studying different bimolecular activities within the human body. It was found that the photoluminescence (PL) of Rh 6G was quenched when it was kept in the vicinity of the synthesized GNs, which was explained in terms of the Förster energy transfer mechanism. Thus, the present study will open up a plethora of opportunities for researchers to employ the nanostructures of gold and other metals in developing low-cost and Internet of Things (IoT)-based sensing devices using only a smart phone.

A facile deoxyuridine/biotin-modified molecular beacon for simultaneous detection of proteins and nucleic acids via a label-free and background-eliminated fluorescence assay

Simultaneous detection of different types of cancer biomarkers (nucleic acids and proteins) could facilitate early diagnosis of cancer and clinical treatment. Herein, a simultaneous detection platform of proteins and nucleic acids has been developed using a single substrate probe combining a label-free and background-eliminated fluorescence assay. Telomerase and telomerase RNA (TR) were chosen as the models. The molecular beacon (dU-BIO-HP) that contains deoxyuridine/biotin in its side arm, a TR recognition sequence in the loop and a telomerase substrate primer at the stem end was ingeniously designed. In the presence of telomerase, the stem of dU-BIO-HP is elongated by the addition of telomere repeats complementary to the assistant DNA. Furthermore, the formed dsDNA performed as engaging primers to initiate a SDA reaction, generating abundant G-quadruplex monomers. Similarly, on TR, the hybridization between TR and dU-BIO-HP can open its stem, triggering another SDA reaction, producing abundant short ssDNAs. With the G-quadruplex binding with ZnPPIX and ssDNA binding with SG for specific fluorescence responses, the label-free multiple detection can be achieved. In our strategy, the deoxyuridine of dU-BIO-HP acts as a barrier to block the DNA extension due to its strong inhibitory effects on DNA polymerase activity and to make sure that the two SDA reactions occurred independently. The biotin of dU-BIO-HP enables the reduction of the background from the binding between SG, ZnPPIX and dU-BIO-HP through streptavidin-biotin interaction. This method showed an excellent sensitivity with telomerase and TR detection limit of 2.18 HeLa cells per mL and 0.16 × 10^-12 M, respectively. Furthermore, the telomerase and TR in different cell lines have been evaluated as powerful tools for biomedical research and clinical diagnosis.

Gold Nanoparticle-Based Colorimetric Strategies for Chemical and Biological Sensing Applications

Gold nanoparticles are popularly used in biological and chemical sensors and their applications owing to their fascinating chemical, optical, and catalytic properties. Particularly, the use of gold nanoparticles is widespread in colorimetric assays because of their simple, cost-effective fabrication, and ease of use. More importantly, the gold nanoparticle sensor response is a visual change in color, which allows easy interpretation of results. Therefore, many studies of gold nanoparticle-based colorimetric methods have been reported, and some review articles published over the past years. Most reviews focus exclusively on a single gold nanoparticle-based colorimetric technique for one analyte of interest. In this review, we focus on the current developments in different colorimetric assay designs for the sensing of various chemical and biological samples. We summarize and classify the sensing strategies and mechanism analyses of gold nanoparticle-based detection. Additionally, typical examples of recently developed gold nanoparticle-based colorimetric methods and their applications in the detection of various analytes are presented and discussed comprehensively.

Colorimetric bio-barcode immunoassay for parathion based on amplification by using platinum nanoparticles acting as a nanozyme

A competitive bio-barcode immunoassay is described for the trace detection of parathion in water, pear, cabbage, and rice samples. It is based on amplification by platinum nanoparticle acting as a nanozyme. Gold nanoparticles (AuNPs) were modified with (a) monoclonal antibodies (mAbs) against parathion, and (b) thiolated single-stranded DNA (ssDNA) oligonucleotides. Magnetic nanoparticles (MNPs) were functionalized with ovalbumin coupled with parathion hapten. Parathion and its hapten compete with mAbs on the surface of the AuNPs. Subsequently, the platinum nanoparticles (PtNPs) probe, which was functionalized with the complementary thiolated ssDNA (C-ssDNA), was added to the reaction mixture for the detection of parathion. The signal was catalytically amplified by coupling with platinum nanozyme using teramethylbenzidine and H₂O₂ as the chromogenic system. The immunoassay has a linear range that extends from 0.01-50 μg·L^-1, and the limit of detection is 2.0 × 10^-3 μg·L^-1. The recoveries and relative standard deviations (RSDs) ranged from 91.1-114.4% and 3.6-15.8%, respectively. The method correlates well with data obtained by gas chromatography-tandem mass spectrometry (GC-MS/MS). Graphical abstract The parathion and the magnetic nanoparticles (MNPs) labelled with hapten-OVA competitively reacted to AuNPs modified with mAbs and thiolated DNA for the detection of parathion. The signal was catalyzed by platinum nanozyme. The limit of detection for parathion is 2.0 ng·L^-1.

Mycobacterium tuberculosis strain H37Rv Electrochemical Sensor Mediated by Aptamer and AuNPs-DNA

The accurate and rapid detection of Mycobacterium tuberculosis ( M. tuberculosis) is essential for the effective treatment of tuberculosis. In this article, we propose an electrochemical sensor to detect M. tuberculosis reference strain H37Rv. The sensor contains an H37Rv aptamer and oligonucleotides modified with gold nanoparticles (AuNPs-DNA). An H37Rv aptamer screened by our laboratory was used as the recognition probe. The change in frequency shift mediated by AuNPs-DNA in the presence of H37Rv was detected using a multichannel series piezoelectric quartz crystal (MSPQC) system. Three oligonucleotides modified with gold nanoparticles were designed. These oligonucleotides contained 12, 12, and 13 bases that hybridized with the 37-nt H37Rv aptamer. H37Rv aptamer was immobilized on the gold electrode surface by Au-S bonds. A conductive-layer was then formed by sequential hybridization of the aptamer with the three designed AuNPs-DNAs. When H37Rv was present, it specifically bound to the aptamer, resulting in the detachment of AuNPs-DNA from the electrode. The conductive layer was thereby replaced by a nonconductive complex of aptamer and bacteria. These changes were monitored by the MSPQC system. The proposed sensor is rapid, specific and sensitive, the detection time was 2 h. The detection limit was 100 cfu/mL. This sensor would be of great benefit for the early clinical diagnosis of tuberculosis.

Ultrasensitive Detection of HIV DNA with Polymerase Chain Reaction-Dynamic Light Scattering

Early diagnosis of HIV biomarkers or genes is the key to reducing acquired immunodeficiency syndrome (AIDS) mortality. In our work, we developed a novel polymerase chain reaction-dynamic light scattering (PCR-DLS) assay for one-step sensitive detection of HIV DNA based on the average-diameter change of gold nanoparticles (AuNPs). This is the first PCR assay that makes use of the DLS technique as a signal read-out, with the particle size measured by DLS increasing with the concentration of target DNA. With the help of the AuNP probes, this PCR-DLS assay can effectively improve the specificity of PCR reactions, which can greatly increase the detection sensitivity, with a detection limit of 1.8 aM (S/N = 3). In addition, the proposed strategy was successfully used to analyze target DNA in human serum samples, indicating that the PCR-DLS assay has a promising potential application for rapid and early clinical diagnosis of HIV infection.