A novel electrochemical immunosensor based on catalase functionalized AuNPs-loaded self-assembled polymer nanospheres for ultrasensitive detection of tetrabromobisphenol A bis(2-hydroxyethyl) ether

Label-Free Assessment of Neuron-Specific Enolase via Polydopamine over a Carbon-Nanotube-Based Flexible Immunosensor

A label-free electrochemical immunosensor was developed for the rapid and sensitive detection of neuron-specific enolase (NSE). The electropolymerization of dopamine in conjunction with highly conductive carbon nanotubes offers a simple and quick platform for the direct anchoring of antibodies without the assistance of any coupling agent as well as a blocking agent. The developed immunosensor exhibited a wider detection range from 120 pM (9 ng mL-1) to 3 nM (200 ng mL-1) for NSE with a high sensitivity of 3.9 μA pM-1 cm-2 in 0.1 M phosphate-buffered saline (PBS) at physiological pH (7.4). Moreover, the short recognition time (15 min) for the antigen enabled the detection to be fast and less invasive. Additionally, the evaluation of a rate constant at various concentrations of NSE via feedback mode of scanning electrochemical microscopy (SECM) explained the profound effect of antigen concentration on the rate of flow of electrons. Therefore, the proposed immunosensor can be a promising tool for the early detection of small cell lung cancer in a very short period of time with consistent accuracy.

A visual colorimetric assay based on phage T156 and gold nanoparticles for the sensitive detection of Salmonella in lettuce

In this study, a new technique was developed for visual and precise identification of Salmonella using phage T156-mediated aggregation of gold nanoparticles. The phage binds to gold nanoparticles in a dispersed and stable state under high NaCl concentrations. When Salmonella is introduced, the phage specifically recognizes and adsorbs the targeted bacteria, causing the AuNPs to undergo a discoloration reaction resulting in aggregation, which enables Salmonella visualization. The method has a detection range of 3.8 × 101-3.8 × 109 CFU/mL and a limit of detection of 38 CFU/mL and can produce results in approximately 80 min. The technique was also tested on field samples, including spiked lettuce, and was found to be accurate with a recovery rate of 81.0-119.2% and relative standard deviations ranging from 3.3% to 14.7%. Notably, this technique utilizes phages as recognition elements in colorimetric methods, offering simplicity, speed, and the ability to effectively distinguish between live and dead Salmonella. It demonstrates remarkable sensitivity, specificity, and accuracy. Furthermore, it presents a novel avenue for the rapid detection of other pathogenic bacteria.

A transcriptomic-based analysis predicts the neuroendocrine disrupting effect on adult male and female zebrafish (Danio rerio) following long-term exposure to tetrabromobisphenol A bis(2-hydroxyethyl) ether

Endocrine-disrupting chemicals (EDCs) are now ubiquitously distributed in the environment. Tetrabromobisphenol A bis(2-hydroxyethyl) ether (TBBPA-DHEE) pollution in environment media poses a significant threat to humans and aquatic organisms as a result of its potential neurotoxicity and endocrine-disrupting effect. The endocrine-disrupting effects of TBBPA-DHEE on aquatic organisms, however, have received limited attention. In this study, the neurotoxicity and reproductive endocrine-disruptive effect of TBBPA-DHEE was evaluated by observing the neurobehavioral changes, vitellogenin (VTG), testosterone, 17β-estradiol and gene expression levels in adult male and female zebrafish exposed to TBBPA-DHEE (0.05, 0.2 and 0.3 mg/L) for 100 days. Furthermore, transcriptomic analysis was conducted to unravel other potential neuroendocrine-disrupting mechanism. Our result showed TBBPA-DHEE significantly (p < 0.05) altered the locomotor behavior and motor coordination abilities in both sexes. Steroid hormone and VTG levels were also altered indicating the neuroendocrine-disrupting effect of TBBPA-DHEE on the hypothalamic-pituitary-gonadal-axis. A total of 1568 genes were upregulated and 542 genes downregulated in males, whereas, 1265 upregulated and 535 downregulated genes were observed in females. The KEGG enrichment analysis showed that cell cycle and p55 signaling pathways were significantly enriched due to TBBPA-DHEE exposure. These pathways and its component genes are potential target of EDCs. The significant upregulation of genes in these pathways could partly explain the neuroendocrine disrupting effect of TBBPA-DHEE. The observed toxic effects of TBBPA-DHEE observed in this study is confirmation of the endocrine-disrupting toxicity of this chemical which would be valuable in biosafety evaluation and biomonitoring of TBBPA-DHEE for public health purposes.

Nanomaterials in bioelectrochemical devices: on applications enhancing their positive effect

Electrochemical biosensors and biofuel cells are finding an ever-increasing practical application due to several advantages. Biosensors are miniature measuring devices, which can be used for on-the-spot analyses, with small assay times and sample volumes. Biofuel cells have dual benefits of environmental cleanup and electric energy generation. Application of nanomaterials in biosensor and biofuel-cell devices increases their functioning efficiency and expands spheres of use. This review discusses the potential of nanomaterials in improving the basic parameters of bioelectrochemical systems, including the sensitivity increase, detection lower-limit decrease, detection-range change, lifetime increase, substrate-specificity control. In most cases, the consideration of the role of nanomaterials links a certain type of nanomaterial with its effect on the bioelectrochemical device upon the whole. The review aims at assessing the effects of nanomaterials on particular analytical parameters of a biosensor/biofuel-cell bioelectrochemical device.

Indirect competitive-structured electrochemical immunosensor for tetrabromobisphenol A sensing using CTAB-MnO2 nanosheet hybrid as a label for signal amplification

Tetrabromobisphenol A (TBBPA) is a kind of brominated flame retardant that is usually added to products to reduce their flame retardancy. However, its extensive use has resulted in their residues being found in the environment, which is very harmful. Herein, an indirect competitive immunosensor has been established for TBBPA detection based on the signal amplification system. Pd nanospheres in situ reduced on the surface of MnO₂ nanosheet hybrid (MnO₂/Pd) was used as the label for the secondary antibody through the Pd-N bond, and gold-toluidine blue composite was loaded onto MWCNTs (MWCNTs/Au-TB), which functioned as the platform for the immunosensor. The spherical structure of Pd had abundant catalytic active sites, which enhanced the catalytic activity of MnO₂/Pd as the label, hence amplifying the signal response. Besides, MWCNTs/Au-TB improved electron transfer and produced a strong signaling pathway for immobilizing antigens through the Au-NH₂ bond, which can specifically recognize primary antibodies to improve sensitivity. The immunosensor had a linear concentration range of 0-81 ng/mL, a low detection limit of 0.17 ng/mL (S/N = 3), with good stability, selectivity, and reproducibility based on the above advantages. Additionally, the acceptable accuracy and recoveries (recoveries, 92-124%; CV, 3.3-8.8%) in the real water sample analysis indicated that this strategy is promising for emerging pollutant analysis.

Metal Nanoparticle and Quantum Dot Tags for Signal Amplification in Electrochemical Immunosensors for Biomarker Detection

With the increasing importance of healthcare and clinical diagnosis, as well as the growing demand for highly sensitive analytical instruments, immunosensors have received considerable attention. In this review, electrochemical immunosensor signal amplification strategies using metal nanoparticles (MNPs) and quantum dots (Qdots) as tags are overviewed, focusing on recent developments in the ultrasensitive detection of biomarkers. MNPs and Qdots can be used separately or in combination with other nanostructures, while performing the function of nanocarriers, electroactive labels, or catalysts. Thus, different functions of MNPs and Qdots as well as recent advances in electrochemical signal amplification are discussed. Additionally, the methods most often used for antibody immobilization on nanoparticles, immunoassay formats, and electrochemical methods for indirect biomarker detection are overviewed.

An overview of surface-enhanced Raman scattering substrates by pulsed laser deposition technique: fundamentals and applications

Metallic nanoparticles (NPs), as an efficient substrate for surface-enhanced Raman scattering (SERS), attract much interests because of their various shapes and sizes. The appropriate size and morphology of metallic NPs are critical to serve as the substrate for achieving an efficient SERS. Pulsed laser deposition (PLD) is one of the feasible physical methods employed to synthesize metallic NPs with controllable sizes and surface characteristics. It has been recognized to be a successful tool for the deposition of SERS substrates due to its good controllability and high reproducibility in the manufacture of metallic NPs. This review provides an overview about the recent advances for the preparation of SERS substrates by PLD technique. The influences of parameters on the sizes and morphologies of metallic NPs during the deposition processes in PLD technique including laser output parameters, gas medium, liquid medium, substrate temperature, and properties of 3D substrate are presented. The applications of SERS substrates produced by PLD in the environmental monitoring and biomedical analysis are summarized. This knowledge could serve as a guideline for the researchers in exploring further applications of PLD technique in the production of SERS substrate.

Enzyme-linked immunosorbent assay based on light absorption of enzymatically generated aniline oligomer: Flow injection analysis for 3-phenoxybenzoic acid with anti-3-phenoxybenzoic acid monoclonal antibody

A flow enzyme-linked immunosorbent assay (ELISA) method based on light absorption by enzymatically generated aniline oligomer in the presence of horseradish peroxidase (HRP), H₂O₂, and aniline is proposed. Aniline oligomer is rapidly formed through the polymerization reaction via the enzymatic reaction, and its fast reaction rate is beneficial for flow ELISA. An anti-3-phenoxybenzoic acid monoclonal antibody (mAb) was produced by mice, and was used for the flow competitive ELISA for the determination of 3-phenoxybenzoic acid (3PBA), which was performed on an acrylic plate having a Y-shaped channel. ABS resin beads (d = 1 mm) were filled in the channel to increase the surface area for the adsorption of the mAb. A clank-type detection chamber (optical length: 1 cm) made of polydimethylsiloxane (PDMS) containing carbon black, which can significantly decrease light scattering, was fabricated with a 3D printer. The PDMS detection chamber was connected to the outlet of the acrylic flow chip with a tube. A blue LED was used as a light source for the flow ELISA. The inhabitation concentration at 50% and the detection range (absorbance change from 90 to 10%) for the proposed flow competitive ELISA were 0.5 ppm and 0.05-5 ppm, respectively. We also performed the flow competitive ELISA in an artificial and real urine, and no significant matrix effect of the urine samples on the ELISA was found.

Advances in immunosensor technology

In recent years, advances in immunosensor device fabrication have significantly expanded the use of this technology in a broad range of applications including clinical diagnosis, food analysis, quality control, environmental studies and industrial monitoring. The most important aspect in fabrication is to obtain a design that provides a low detection limit. The utilization of nanomaterials as a label, catalyst and biosensing transducer is, perhaps, the most popular approach in ultrasensitive devices. This chapter reviews recent advances in immunosensor fabrication and summarizes the most recent studies. Strategies employed to significantly improve sensitivity and specificity of immunosensor technology and the advantages and limitations thereof are explored.

A novel and facile immunosensor based on a barometer: Application for rapid analysis of Escherichia coli in waters

A facile immunosensor was constructed based on a barometer indicator using a double-antibody- sandwich method for rapid and sensitive detection of Escherichia coli (E. coli) from water samples. At the present study, Anti- E. coli DH-5 polyclonal antibody was modified through enriching carboxylated magnetic beads and catalase functionalized gold nanoparticles (AuNPs)- loaded nanospheres. The functionalized AuNPs-loaded nanospheres exhibited an excellent catalysis towards decomposition of hydrogen peroxide (H₂O₂), generating a large volume of oxygen (O₂) into waters, increasing the pressure inside the glass vial, which in turn raised the water level in barometer. Under the optimized experimental conditions, the proposed method showed wide linear ranges (10²- 10⁷ cfu mL^-1), good accuracy and precision (recoveries, 86.7- 107%; CV, 3.2- 8.1%) with a limit of detection (LOD, S/N = 3) and the limit of quantification (LOQ, S/N = 10) were 80 cfu mL^-1and 267 cfu mL^-1, respectively. Furthermore, the fabricated portable immunosensor device showed some distinct features in low cost and visibility, suggesting great potential for rapid and on-site analysis of this bacteria from waters in less developed areas of developing countries.

High-throughput chemiluminescence immunoassay based on Co2+/hemin synergistic catalysis for sensitive detection tetrabromobisphenol A bis(2-hydroxyethyl) ether in the environments

Here, a novel chemiluminescence (CL) immunoassay was fabricated for sensitive determination of tetrabromobisphenol A bis(2-hydroxyethyl) ether (TBBPA-DHEE), one of typical tetrabromobisphenol A derivatives. At the indirectly competitive method, the synthesized PS@hemin@Co²⁺ was labelled by secondary antibody (Ab₂) instead of common natural enzymes, which showed excellent catalysis towards the decomposition of luminol-H₂O₂ for producing CL signal. Furthermore, the CL signal was greatly amplified owing to the synergistic catalysis of hemin and Co²⁺ in the detection system. Under the optimized conditions, the established method offered (i) low detection limit (LOD, 0.9 μg/L), which was almost 5 times lower than that using a conventional ELISA with the same antibody; (ii) a good linearity (1.6-14.3 μg/L); (iii) satisfactory accuracy and precision (recoveries, 89.67-125.33%; CV, 2.75-8.37%). The proposed CL immunoassay was applied for analysis of environmental samples from various sources collected from Jiangsu and Zhejiang province, China. And the detected concentrations were ranged in 2.4-3.7 μg/L in environmental waters and 1.8-2.4 ng/g (dry weight, dw) in soil samples, indicating great potential for trace TBBPA-DHEE detection from environmental samples.

Nanoparticles as Emerging Labels in Electrochemical Immunosensors

This review shows recent trends in the use of nanoparticles as labels for electrochemical immunosensing applications. Some general considerations on the principles of both the direct detection based on redox properties and indirect detection through electrocatalytic properties, before focusing on the applications for mainly proteins detection, are given. Emerging use as blocking tags in nanochannels-based immunosensing systems is also covered in this review. Finally, aspects related to the analytical performance of the developed devices together with prospects for future improvements and applications are discussed.

Electrochemical immunosensor based on Ag+-dependent CTAB-AuNPs for ultrasensitive detection of sulfamethazine

An electrochemical biosensor was proposed utilizing an improved amplification strategy for the rapid detection of sulfamethazine (as a model target) in aquatic environments. In this competitive immunoassay, cetyltrimethylammonium bromide-capped gold nanoparticles (CTAB-AuNPs) were used as a signal amplifier and electrode matrix and coated with an antigen-antibody (Cag-Ab₁) specific binding system as a recognition unit for the target compound. In addition, silver nanoparticle labels were functionalized with dendritic fibrous nanosilica (DFNS@AgNPs) and decorated onto chitosan/single walled carbon nanohorn (CS/SWCNH)-modified glass carbon electrodes (GCEs), which improved the electron transfer rate and increased the surface area, enabling more coating antigens to be captured. Under acidic conditions, massive amounts of the Ag⁺ bound to the surface of the AuNPs dissolved, and consequently, formed Ag⁺@CTAB-AuNP complexes, which resulted in a distinctly improved peroxidase-like activity and enhanced current response. Furthermore, the destroyed Ab₁-Ab₂-DFNS conjugation greatly decreased the impedance, bringing about the amplification of the electrochemical signals. After optimization of the parameters, the proposed approach exhibited excellent performance, including good sensitivity (LOD, 0.0655 ng/mL) and satisfactory accuracy (recoveries, 79.02%-118.39%; CV, 3.18%-9.82%), which indicates the great potential of this strategy for the rapid detection of trace pollutants in the environments.

A competitive immunosensor for ultrasensitive detection of sulphonamides from environmental waters using silver nanoparticles decorated single-walled carbon nanohorns as labels

A novel competitive electrochemical immunosensor based on Au nanodendrites (Au NDs)/silver nanoparticles (Ag NPs) @single-walled carbon nanohorns (SWCNHs) was established for sensitive determination of sulphonamides (SAs) in aquatic environments. The indirectly competitive binding system of the approach was composed of coating antigen that coated on Au NDs/glass carbon electrode (GCE), the target and primary antibody (Ab₁). When Ab₂@Ag NPs@SWCNHs was captured by coating antigen (Cag)- Ab₁ complex, massive Ag⁺ will be released from electrode in the presence nitric acid (HNO₃), consequently, the generated Ag⁺ will significantly amplify the electrochemical signal, which would be recorded by the linear sweep voltametry (LSV). Meanwhile, the used three-dimensional Au nanodendrites (Au NDs) could increase the conductivity of the electrode and the size of the active surface area to improve the antigen-loading. Under the optimal conditions, the immunosensor showed a good linear relationship for sulfamethazine (SMZ)ranged in 0.33-63.81 ng/mL with a detection limit of 0.12 ng/mL (LOD, based on 90% inhibition). In addition, the proposed approach exhibited satisfactory accuracy and precision (recoveries, 79.25-119.25%; CV, 2.14-9.58%), it can be applied for rapid analysis of the trace pollutants from environmental waters.