Rapid and selective detection of Fe (III) by using a smartphone-based device as a portable detector and hydroxyl functionalized metal-organic frameworks as the fluorescence probe

Chitosan-based fluorescent probe for the detection of Fe3+ in real water and food samples

Iron ions play a crucial role in the environment and the human body. Therefore, developing an effective detection method is crucial. In this paper, we report CNS2, a chitosan-based fluorescent probe utilizing naphthalimide as a fluorophore. CNS2 is designed to "quench" its own yellow fluorescence through the specific binding of compounds containing enol structures to Fe3+. Studying the fluorescence lifetime of CNS2 in the presence or absence of Fe3+ reveals that the quenching mechanism is static. The presence of multiple recognition sites on the chitosan chain bound to Fe3+ gave CNS2 rapid recognition (1 min) and high sensitivity, with a detection limit as low as 0.211 μM. Moreover, the recognition of Fe3+ by CNS2 had a good specificity and was not affected by interferences. More importantly, in this study, CNS2 was successfully utilised to prepare fluorescent composite membranes and to detect Fe3+ in real water samples and a variety of food samples. The results show that the complex sample environment still does not affect the recognition of Fe3+ by CNS2. All the above experiments obtained more satisfactory results, which provide strong support for the detection of Fe3+ by the probe CNS2 in practical applications.

Fe-MOF-based fluorescent sensor with on/off capabilities for the highly sensitive detection of tert-butylhydroquinone in edible oils

In this work, a "turn off-on" fluorescent sensor was developed for highly sensitive determination of tert-butylhydroquinone (TBHQ) based on an Fe(III)-based metal-organic framework (Fe-MOF). An Fe-MOF with an octahedral structure was synthesized via a simple hydrothermal method using ferric chloride hexahydrate and 2-aminoterephthalic acid (NH2-BDC) as raw materials. The fluorescence of Fe-MOF is extremely weak owing to ligand-to-metal charge transfer (LMCT) and internal filtration effect (IFE). When the system contained TBHQ, the binding of TBHQ to Fe(III) inhibited the LMCT of the fluorescent ligand NH2-BDC to Fe(III), releasing the fluorescence of NH2-BDC and thus restoring the fluorescence. With this as the basis, a rapid, sensitive, and selective fluorescence sensor is developed for the detection of TBHQ. Under the optimal conditions, TBHQ showed good linearity with fluorescence intensity in the range of 0-1.5 × 102 μmol L-1 and a detection limit of 0.0030 μmol L-1 (S/N = 3). The selectivity, reproducibility, and stability of the developed Fe-MOF-based sensors are comprehensively studied. Finally, the practicality of the method is verified by examining the detection of TBHQ in soybean oil; the results are consistent with those obtained using conventional high-performance liquid chromatography.

A novel smartphone-integrated binary-emission molecularly imprinted fluorescence sensor embedded with MIL-101(Cr) for sensitive and real-time detection of protein

Aiming for precise, real-time, and on-site analysis of proteins, an innovative binary-emission fluorescence imprinted polymer was designed by sol-gel method after mixing MIL-101(Cr), green CdTe (g-CdTe) and red CdTe (r-CdTe) for detection of protein. In this proposal, MIL-101(Cr), as a favorable supporter, provided high surface area and porosity for imprinting sites, which ameliorated the transfer rate and the sensitivity of the nanosensor. And g-CdTe and r-CdTe were served as signal transduction for dual-emission response. Based on strengthened recognition reaction between high-affinity imprinting sites and protein, the fluorescence intensities of g-CdTe and r-CdTe yielded conspicuous two responses at 528 nm and 634 nm for protein under the excitation of 350 nm. The cytochrome c (Cyt c) and trypsin were served as model proteins to verify the generality of strategy. Given prominent merits of MIL-101(Cr), g-CdTe/r-CdTe@MIL-101(Cr)@MIP exhibited good linear range of 1-30 μM for Cyt c and 0.15-4 μM for trypsin, and the limit of detection were 0.13 μM and 0.014 μM, respectively. Significantly, an unsophisticated smartphone-based sensing device was developed by integrating g-CdTe/r-CdTe@MIL-101(Cr)@MIP with a 3D printing portable device to obtain precise on-site results. As expected, this portable platform was successfully applied for monitoring Cyt c and trypsin with a detection limit of 0.71 μM and 0.026 μM, respectively. These results indicated this dual-response molecularly imprinted fluorescence senor based on smartphone provided promising perspectives on futural on-site protein analysis.

Advanced electro-Fenton degradation of a mixture of pharmaceutical and steel industrial wastewater by pallet-activated-carbon using three-dimensional electrode reactor

In the present work, a three-dimensional electrode reactor (3Der) using pallet activated carbon (PAC), as particle electrodes, was investigated to degrade non-biodegradable organic pollutants in pharmaceutical wastewater and steel industry wastewater. The effect of operating parameters, such as pH, electrode distance, O₂ flow rate, and current density was investigated. The TOC removal efficiency in 3Der was achieved at the highest mineralization yield of 94.1% after 180 min electrolysis, which was 10-19% higher than the two-dimensional electrode reactor (2Der). The higher performance of the 3Der can be attributed to the indirect and direct oxidation mechanisms. The impact of supporting electrolytes was decreased in order as chloride > nitrate > sulfate. The morphology of sludge and the presence of Fe(OH)₃ after Fenton-oxidation were investigated. 3Der system improved biodegradability of pharmaceutical wastewater after electro-Fenton treatment at a PW/SIW ratio of 3:1 (BOD₅/COD = 0.6). Hence, the mechanism of 3Der/PAC, as particle electrodes was also proposed. 3Der with PAC particle electrodes using steel industry wastewater as a catalyst is an exciting technique for remediation of organic contaminated pharmaceutical wastewater.

Design and Multiple Applications of Mixed-Ligand Metal-Organic Frameworks with Dual Emission

Herein, we revealed the factors that affect the emission in mixed-ligand metal-organic frameworks (MOFs) with the combination of terephthalic acid (BDC), 2-aminoterephthalic acid (BDC-NH₂), and 2,5-dihydroxylterephthalic acid [BDC-(OH)₂] as models. The -NH₂ and -(OH)₂ groups change the π-conjugation and luminescence behaviors than BDC, so the ligands show different optical behaviors. The Zn²⁺ ion with a 3d¹⁰ full electronic structure shows little effect on the emission of the ligand and is selected as the metal node. We found that the emission of BDC is weak and incompatible to that of BDC-NH₂, so only the emission of BDC-NH₂ was observed in the BDC/BDC-NH₂-MOF. Crosstalk occurs between the emissions from BDC and BDC-(OH)₂ for the single emission from BDC/BDC-(OH)₂-MOFs, even different ratios are selected. The MOFs prepared with BDC-NH₂ and BDC-(OH)₂ show dual emission at 450 and 550 nm, while the relative intensity was easily tuned with the ligand ratio and excitation wavelength. Thus, abundant optical behaviors and extensive applications were realized, including but not limited to (1) dual emission from single MOFs, (2) tunable color from blue to yellow with the excitation from 290 to 370 nm for information encryption and decryption, (3) white emission obtained under an excitation of 330 nm, and (4) response of -NH₂ groups to HCHO and Fe³⁺ ions for ratiometric fluorescence sensing and visual detection. This work revealed the factors that affect the emission in mixed-ligand MOFs, studied their optical behaviors, and realized different applications with single MOFs.

N-alkylation briefly constructs tunable multifunctional sensor materials: Multianalyte detection and reversible adsorption

A series of N-alkyl-substituted polybenzimidazoles (SPBIs), synthesized by simple condensation and N-alkylation, act as functional materials with tunable microstructures and sensing performance. For their controllable morphologies, the formation of nano-/microspheres is observed at the n(RBr)/n(PBI) feed ratio of 5:1. Products with different degrees of alkylation can recognize metal ions and nitroaromatic compounds (NACs). For example, SPBI-c, obtained at the feed ratio of 1:1, can selectively detect Cu2+, Fe3+, and NACs. By contrast, SPBI-a, obtained at the feed ratio of 0.1:1, can exclusively detect Cu2+ with high sensitivity. Their sensing mechanisms have been studied by FT-IR spectroscopy, SEM, XPS, and DFT calculations. Interestingly, the SPBIs can adsorb Cu2+ in solution and show good recyclability. These results demonstrate that polymeric materials with both sensing and adsorption applications can be realized by regulating the alkylation extent of the main chain, thus providing a new approach for the facile synthesis of multifunctional materials.

Low-cost devices with fluorescence spots brightness and size dual-mode readout for the rapid detection of Cr(VI) based on smartphones

Sensitive, convenient and rapid detection devices for toxic Cr(VI) suitable for filed use are required. Smartphone can be used as the detector, but the quality of images taken with a smartphone may depend on the ambient light and the operator. In this work, two types of low-cost and portable smartphone-based devices used for fluorescence spots brightness and size dual-mode detection of Cr(VI) were constructed with the aid of the 3D printing, which avoids the effect of ambient light and maintains a fixed position of the phone camera relative to the samples. Based on the brightness reflected by the blue channel of RGB values of the images of carbon nanodots, a linear relationship between quenching efficiency and concentration of Cr(VI) in a range of 0.2-150 μM with a limit of detection of 0.058 μM was attained, which is comparable to or better than that from fluorescence spectrometers. With the size variation of fluorescence spots, a linear range of 10-350 μM was acquired and it is more intuitive for direct naked-eye estimation of the concentration of Cr(VI). The applicability of the proposed devices for the detection of Cr(VI) was verified with water and soil samples with recoveries ranging in 95.0-108.2%.

Metal-organic frameworks for chemical sensing devices

Metal-organic frameworks (MOFs) are exceptionally large surface area materials with organized porous cages that have been investigated for nearly three decades. Due to the flexibility in their design and predisposition toward functionalization, they have shown promise in many areas of application, including chemical sensing. Consequently, they are identified as advanced materials with potential for deployment in analytical devices for chemical and biochemical sensing applications, where high sensitivity is desirable, for example, in environmental monitoring and to advance personal diagnostics. To keep abreast of new research, which signposts the future directions in the development of MOF-based chemical sensors, this review examines studies since 2015 that focus on the applications of MOF films and devices in chemical sensing. Various examples that use MOF films in solid-state sensing applications were drawn from recent studies based on electronic, electrochemical, electromechanical and optical sensing methods. These examples underscore the readiness of MOFs to be integrated in optical and electronic analytical devices. Also, preliminary demonstrations of future sensors are indicated in the performances of MOF-based wearables and smartphone sensors. This review will inspire collaborative efforts between scientists and engineers working within the field of MOFs, leading to greater innovations and accelerating the development of MOF-based analytical devices for chemical and biochemical sensing applications.

Recent progress in smartphone-based techniques for food safety and the detection of heavy metal ions in environmental water

Emerging smartphone-based point-of-care tests (POCTs) are cost-effective, precise, and easy to implement in resource-limited areas. Thus, they are considered a potential alternative to conventional diagnostic testing. This review explores food safety and the detection of metal ions in environmental water based on unprecedented smartphone technology. Specifically, we provide an overview of various methods used for target analyte detection (antibiotics, enzymes, mycotoxins, pathogens, pesticides, small molecules, and metal ions), such as colorimetric, fluorescence, microscopic imaging, and electrochemical methods. This paper performs a comprehensive review of smartphone-based POCTs developed in the last three years (2018-2020) and evaluates their relative advantages and limitations. Moreover, we discuss the imperative role of new technology in the progress of POCTs. Sensor materials (metal nanoparticles, carbon dots, quantum dots, organic substrates, etc.) and detection techniques (paper-based, later flow assay, microfluidic platform, etc.) involved in POCTs based on smartphones, and the challenges faced by these techniques, are addressed.

MOF/COF-based materials using 3D printing technology: applications in water treatment, gas removal, biomedical, and electronic industries

We have considered the newest outcomes in the uses of 3D-printed COF- and MOF-based materials for diverse applications.

A portable and high-sensitivity optical sensing system for detecting fluorescently labeled enterohaemorrhagic Escherichia coli Shiga toxin 2B-subunit

We developed a stand-alone, real-time optical detection device capable of reading fluorescence intensities from cell samples with high sensitivity and precision, for use as a portable fluorescent sensor for sensing fluorescently labeled enterohemorrhagic Escherichia coli (EHEC) Shiga toxins (Stxs). In general, the signal intensity from the fluorescently labeled Stxs was weak due to the small number of molecules bound to each cell. To address this technical challenge, we used a highly sensitive light detector (photomultiplier tube: PMT) to measure fluorescence, and designed a portable optical housing to align optical parts precisely; the housing itself was fabricated on a 3D printer. In addition, an electric circuit that amplified PMT output was designed and integrated into the system. The system shows the toxin concentration in the sample on a liquid crystal display (LCD), and a microcontroller circuit is used to read PMT output, process data, and display results. In contrast to other portable fluorescent detectors, the system works alone, without any peripheral computer or additional apparatus; its total size is about 17 × 13 × 9 cm³, and it weighs about 770 g. The detection limit was 0.01 ppm of Alexa Fluor 488 in PBS, which is ten thousand times lower than those of other smartphone-based systems and sufficiently sensitive for use with a portable optical detector. We used the portable real-time optical sensing system to detect Alexa Fluor 488–tagged Stx2B-subunits bound to monocytic THP-1 cells expressing the toxin receptor globotriaosylceramide (Gb3). The device did not detect a signal from Gb3-negative PD36 cells, indicating that it was capable of specifically detecting Stxs bound to cells expressing the toxin receptor. Following the development of a rapid and autonomous method for fluorescently tagging cells in food samples, the optical detection system described here could be used for direct detection of Shiga toxins in food in the field.

Carbon quantum dots (CQDs) modified ZnO/CdS nanoparticles based fluorescence sensor for highly selective and sensitive detection of Fe(III)

A simple and fast spectrofluorimetric method coupled with carbon quantum dots (CQDs) modified ZnO/CdS nanoparticles was developed for the detection of Ferric iron (Fe(III)). The fluorescence of CQDs/ZnO/CdS NPs was effectively quenched by Fe(III) due to the strong interaction between the CQDs/ZnO/CdS NPs and Fe(III). In addition, the detection limit of Fe(III) was about 1.72×10^-7M. The effect of foreign ions on the fluorescence intensity of CQDs/ZnO/CdS NPs showed that the interference response in detecting of Fe(III) ions was low. Moreover, the quenching of Fe(III) and CQDs/ZnO/CdS NPs was discussed to be a static quenching procedure, which was proved by quenching constant K_SV and fluorescence lifetime τ. The study of thermodynamics showed that the values of entropy change (ΔS) and enthalpy change (ΔH) were both positive, and the value of free energy (ΔG) was negative, which implied that the weak interaction of the molecular between CQDs/ZnO/CdS NPs and Fe(III) was hydrophobic force, and the quenching process was endothermic and spontaneous.