Incorporation of homochiral metal-organic cage into ionic liquid based monolithic column for capillary electrochromatography

Amino-β-cyclodextrin derivatives with different chain lengths as chiral selectors for separation of dansyl amino acid enantiomers by capillary electrophoresis

To date, cyclodextrins (CDs) and their derivatives are recognized as highly effective chiral selectors in electrophoresis for enantiomer separation due to their numerous advantages. In this study, three amino-β-CD derivatives, including NH2-β-CD-5 (Mono-(6-(tetraethylenepentamine)-6-deoxy)-beta-Cyclodextrin), NH2-β-CD-3 (mono-(6-(diethylenetriamine)-6-deoxy)-β-Cyclodextrin), and NH2-β-CD-1 (6-Monodeoxy-6-monoamino-beta-cyclodextrine) with varying amino substituent chain lengths were employed as chiral selectors in capillary electrophoresis (CE) to examine their chiral selectivity in the separation of five dansylated amino acid enantiomers, namely Dns-DL-Val, Dns-DL-Leu, Dns-DL-Thr, Dns-DL-Phe, and Dns-DL-Ser, as the chain length of the substituent group significantly impacts separation performance. Among the three amino-β-CD derivatives, NH2-β-CD-5 exhibited superior performance by separating four dansylated amino acid enantiomers, whereas NH2-β-CD-3 and NH2-β-CD-1 separated only two and one enantiomers, respectively. Additionally, the effects of pH values, buffer concentrations, and concentrations of the chiral selectors on the separation of dansylated amino acid enantiomers were also investigated. Furthermore, the stability and reproducibility of the three amino-β-CD derivatives were evaluated, with the relative standard deviations (RSDs) of resolution all below 8.2 %.

Monomer-mediated growth of β-cyclodextrin-based microporous organic network as stationary phase for capillary electrochromatography

CD-MONs (β-cyclodextrin-based microporous organic networks), derived from β-cyclodextrin, possess notable hydrophobic characteristics, a considerable specific surface area, and remarkable stability, rendering them highly advantageous in separation science. This research aimed to investigate the utility of CD-MONs in chromatography separation. Through a monomer-mediated technique, we fabricated an innovative CD-MON modified capillary column for application in open-tubular capillary electrochromatography (OT-CEC). The CD-MON-based stationary phase on the capillary's inner surface was analyzed using Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). We assessed the performance of the CD-MON modified capillary column for separation purposes. The microstructure and pronounced hydrophobicity of CD-MON contributed to enhanced selectivity and resolution in separating diverse hydrophobic analytes, such as alkylbenzenes, halogenated benzenes, parabens, and polycyclic aromatic hydrocarbons (PAHs). The maximum column efficiency achieved was 1.5 × 105 N/m. Additionally, the CD-MON modified capillary column demonstrated notably high column capacity, with a methylbenzene mass loading capacity of up to 197.9 pmol, surpassing that of previously reported porous-material-based capillaries. Furthermore, this self-constructed column was effectively utilized for PAHs determination in actual environmental water samples, exhibiting spiked recoveries ranging from 93.2 to 107.9% in lake water samples. These findings underscore the potential of CD-MON as an effective stationary phase in separation science.

Preparation of dicationic ionic liquid modified silica stationary phase for mixed-mode liquid chromatography and its application for food additive detection

BACKGROUND

Food safety has become an essential aspect of public concern and there are lots of detection means. Liquid chromatography plays a dominating role in food safety inspection because of its high separation efficiency and reproducibility. However, with the increasing complexity of real samples and monitoring requirements, conventional single-mode chromatography would require frequent column replacement and cannot separate different kinds of analytes on a single column simultaneously, which is costly and time-consuming. There is a great need for fabricating mixed-mode stationary phases and validating the feasibility of employing mixed-mode stationary phases for food safety inspection.

RESULTS

This work fabricated multifunctional stationary phases for liquid chromatography to determine diverse food additives under the mixed mode of RPLC/HILIC/IEC. Two dicationic ionic liquid silanes were synthesized and bonded onto the silica gel surface. The functionalized silica was characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and elemental analysis. Both columns provide satisfactory separation performance towards 6 hydrophilic nucleosides, 4 hydrophobic polycyclic aromatic hydrocarbons, and 5 anions. Great repeatability of retention (RSD <0.1 %) and column efficiency (100330 plate/m) were obtained. Thermomechanical analysis and linear solvation energy relationship investigated the retention mechanism. Finally, the better in two prepared columns was employed to separate and determine the contents of NO2- and NO3- in vegetables(highest 4906 mg kg-1 NO3- in spinach), preservatives in bottled beverages (180.8 mg kg-1 sodium benzoate in soft drink), and melamine in milk with satisfactory performance and recovery rates ranging from 96.4 % to 105.6 %.

SIGNIFICANCE

This work developed a novel scheme for preparing mixed-mode stationary phases by dicationic ionic liquid which provides great separation selectivity. Most importantly, this work proved the superiority of employing mixed-mode stationary phases for food safety inspection, which might avoid high-cost and frequent changes of columns and chromatography systems in the near future.

From individuals to families: design and application of self-similar chiral nanomaterials

Establishing an intimate relationship between similar individuals is the beginning of self-extension. Various self-similar chiral nanomaterials can be designed using an individual-to-family approach, accomplishing self-extension. This self-similarity facilitates chiral communication, transmission, and amplification of synthons. We focus on describing the marriage of discrete cages to develop self-similar extended frameworks. The advantages of utilizing cage-based frameworks for chiral recognition, enantioseparation, chiral catalysis and sensing are highlighted. To further promote self-extension, fractal chiral nanomaterials with self-similar and iterated architectures have attracted tremendous attention. The beauty of a fractal family tree lies in its ability to capture the complexity and interconnectedness of a family's lineage. As a type of fractal material, nanoflowers possess an overarching importance in chiral amplification due to their large surface-to-volume ratio. This review summarizes the design and application of state-of-the-art self-similar chiral nanomaterials including cage-based extended frameworks, fractal nanomaterials, and nanoflowers. We hope this formation process from individuals to families will inherit and broaden this great chirality.

Recent progress of porous cage materials in sample preparation, chromatographic separation, and detection

Porous cage materials with certain dimensions, sizes, shapes, and functions have been regarded as promising materials for sample preparation, chromatographic separation, and detection process. In contrast to infinite frameworks such as metal-organic frameworks or covalent organic frameworks, porous cage materials are constructed from discrete molecules containing at least one internal cavity. The well-defined cavities in porous cage materials provide opportunities for non-covalent interactions. These interactions can be programmed into the ligand design or supramolecular cage constructing using the cages as building blocks, offering various host-guest recognition with great selectivity. In this review, we desire to elucidate the fundamental principles governing the design and fabrication of porous cage materials with well-defined cavities, good solvent processability, and modifiable groups, the applications of these porous cage materials in sample preparation, chromatographic separation, and detection were discussed. The recent advantages of porous cage materials for the analysis process were summarized. We state the potential of these materials and provide an outlook for further application strategies. We expect that this review can inspire interest in the porous cage materials research area for analysis.

Preparation of UiO-66 MOF-Bonded Porous-Layer Open-Tubular Columns Using an In Situ Growth Approach for Gas Chromatography

The thermally stable zirconium-based MOF, UiO-66, was employed for the preparation of bonded porous-layer open-tubular (PLOT) GC columns. The synthesis included the in situ growth of the UiO-66 film on the inner wall of the capillary through a one-step solvothermal procedure. SEM-EDX analysis revealed the formation of a thin, continuous, uniform, and compact layer of UiO-66 polycrystals on the functionalized inner wall of the column. The average polarity (ΔIav = 700) and the McReynolds constants reflected the polar nature of the UiO-66 stationary phase. Several mixtures of small organic compounds and real samples were used to evaluate the separation performance of the fabricated columns. Linear alkanes from n-pentane to n-decane were baseline separated within 1.35 min. Also, a series of six n-alkylbenzenes (C3-C8) were separated within 3 min with a minimum resolution of 3.09, whereas monohalobenzene mixtures were separated at 220 °C within 14s. UiO-66 PLOT columns are ideally suited for the isothermal separation of chlorobenzene structural isomers at 210 °C within 45 s with Rs ≥ 1.37. The prepared column featured outstanding thermal stability (up to 450 °C) without any observed bleeding or significant impact on its performance. This feature enabled the analysis of various petroleum-based samples.

Applications of electrophoresis for small enantiomeric drugs in real-world samples: Recent trends and future perspectives

Separation and identification of chiral molecules is a topic widely discussed in the literature and of fundamental importance, especially in the pharmaceutical and food fields, both from industrial and laboratory points of view. Several techniques are used to carry out these analyses, but high-performance liquid chromatography is often the "gold standard." The high costs of chiral columns, necessary for this technique, led researchers to look for an alternative, and capillary electrophoresis (CE) is a technique capable of overcoming some of the disadvantages of liquid chromatography, often providing comparable results in terms of sensitivity and robustness. We addressed this topic, already widely discussed in the literature, providing an overview of the last 6 years of the most frequent and recent applications of CE. To make the manuscript more effective, we decided to divide it into paragraphs that represent the main field of application, from enantioseparation in complex matrices (pharmacokinetic studies or toxicological dosage of drugs, analysis of environmental pollutants, and analyses of foods) to quality control analyses on pharmaceutical formulas. About these, which are the fields of most meaningful use, we mentioned some of the most innovative and performing methods, with a look to the future on the application of new materials used, such as chiral selectors, that can make these types of analyses accessible to all, reducing cost, time, and excessive use of toxic solvents.

Dynamic Cages-Towards Nanostructured Smart Materials

The interest in capsular assemblies such as dynamic organic and coordination cages has blossomed over the last decade. Given their chemical and structural variability, these systems have found applications in diverse fields of research, including energy conversion and storage, catalysis, separation, molecular recognition, and live-cell imaging. In the exploration of the potential of these discrete architectures, they are increasingly being employed in the formation of more complex systems and smart materials. This Review highlights the most promising pathways to overcome common drawbacks of cage systems (stability, recovery) and discusses the most promising strategies for their hybridization with systems featuring various dimensionalities. Following the description of the most recent advances in the fabrication of zero to three-dimensional cage-based systems, this Review will provide the reader with the structure-dependent relationship between the employed cages and the properties of the materials.

In situ growth of imine-based covalent organic framework as stationary phase for high-efficiency electrochromatographic separation

Design of the smart stationary phases, which can improve the separation efficiency is an essential work in the capillary electrochromatography (CEC). Owing to good excellent properties, covalent organic frameworks (COFs) have showed promising potential in the area of separation science. Here, a micro- and mesoporous COF TAPB-BTCA with adequate available interaction sites and outstanding mass transfer performance was first exploited as a stationary phase for high-efficiency in capillary electrochromatography. Through in situ growth approach, the COF TAPB-BTCA coated capillary column was facilely prepared at room temperature. The separation ability of the COF TAPB-BTCA coated capillary column was studied. The fabricated column showed high efficiency for the separation of six types of small molecular compounds, including alkylbenzenes, chlorobenzenes, phenols, parabens, vanillin and related phenolic compounds, and non-steroidal anti-inflammatory drugs (NSAIDs). The maximum theoretical plates reached up to 293,363 N/m for phloroglucinol, showing significantly improved column efficiency in comparison to previous reported COFs-based columns. In addition, the mass loadability for methylbenzene was achieved to 1.44 mg/mL. Also, excellent reproducibility and stability were obtained on the COF TAPB-BTCA coated columns. The relative standard deviations of intra-day (n = 3), inter-day (n = 3) and three batch tubes were all less than 2%, and no obvious change was presented in separation performance after the column was used 120 runs. This COF TAPB-BTCA-based stationary phase would be a promising candidate for high-efficiency chromatographic separation.

Hydrogen Isotope Separation Using a Metal-Organic Cage Built from Macrocycles

Porous materials that contain ultrafine pore apertures can separate hydrogen isotopes via kinetic quantum sieving (KQS). However, it is challenging to design materials with suitably narrow pores for KQS that also show good adsorption capacities and operate at practical temperatures. Here, we investigate a metal-organic cage (MOC) assembled from organic macrocycles and ZnII ions that exhibits narrow windows (<3.0 Å). Two polymorphs, referred to as 2α and 2β, were observed. Both polymorphs exhibit D2 /H2 selectivity in the temperature range 30-100 K. At higher temperature (77 K), the D2 adsorption capacity of 2β increases to about 2.7 times that of 2α, along with a reasonable D2 /H2 selectivity. Gas sorption analysis and thermal desorption spectroscopy suggest a gate-opening effect of the MOCs pore aperture. This promotes KQS at temperatures above liquid nitrogen temperature, indicating that MOCs hold promise for hydrogen isotope separation in real industrial environments.

Imine- and Amine-Type Macrocycles Derived from Chiral Diamines and Aromatic Dialdehydes

The condensation of aromatic dialdehydes with chiral diamines, such as 1,2-trans-diaminocyclohexane, leads to various enantiopure or meso-type macrocyclic Schiff bases, including [2 + 2], [3 + 3], [4 + 4], [6 + 6] and [8 + 8] condensation products. Unlike most cases of macrocycle synthesis, the [3 + 3] macrocycles of this type are sometimes obtained in high yields by direct condensation without a metal template. Macrocycles of other sizes from this family can often be selectively obtained in high yields by a suitable choice of metal template, solvent, or chirality of the building blocks. In particular, the application of a cadmium(II) template results in the expansion of the [2 + 2] macrocycles into giant [6 + 6] and [8 + 8] macrocycles. These imine macrocycles can be reduced to the corresponding macrocyclic amines which can act as hosts for the binding of multiple cations or multiple anions.

Carboxymethyl-β-cyclodextrin and histidine-zeolitic imidazolate framework-8 used for enantioseparation of three basic drugs in open-tubular capillary electrochromatography

Metal organic frameworks (MOFs) have drawn broad attention as a novel stationary phase due to their highly porous structure, modifiable pores, large specific surface areas, and satisfactory stability. In this paper, histidine-zeolitic imidazolate framework-8 (His-ZIF-8) synthesized at room temperature was physically coated to the internal surface of the capillary column and the carboxymethyl-β-cyclodextrin (CM-β-CD) as the chiral selector was chemically bonded to the His-ZIF-8@capillary column. The prepared CM-β-CD@His-ZIF-8@capillary column was used for the enantioseparation of amlodipine, propranolol, and atenolol in capillary electrochromatography. In contrast to the CM-β-CD@capillary column without His-ZIF-8, the CM-β-CD@His-ZIF-8@capillary column reveals significantly improved enantiodiscrimination performance for amlodipine (R_s : 0 → 2.29), propranolol (R_s : 0 → 1.69), and atenolol (R_s : 0 → 0.79). His-ZIF-8 concentration, buffer pH, buffer concentration, and the proportion of organic modifier were evaluated in detail with enantiomerically separating chiral molecules. The repeatability of intraday, day-to-day, and column-to-column have been discussed; the result was preferable, and the relative standard deviation (RSD) of separation parameters was <6.7%.

Single-Crystalline Covalent Organic Frameworks as High-Performance Liquid Chromatographic Stationary Phases for Positional Isomer Separation

Vigorously developing new stationary phases to meet the requirements for the separation of positional isomers that have similar physicochemical properties is still an urgent topic in separation science. Herein, a single-crystalline covalent organic framework (COF-300) packed column for the separation of positional isomers in high-performance liquid chromatography (HPLC) was reported for the first time. Benefitting from its regular shape, excellent chemical and thermal stability, microporous feature, and strong hydrophobicity of single-crystalline COF-300, the single-crystalline COF-300-packed column showed excellent resolution for the separation of positional isomers, including nitroaniline, dichlorobenzene, dibromobenzene, diiodobenzene, diethylbenzene, chloronitrobenzene, bromonitrobenzene, and iodonitrobenzene isomers, which cannot be all separated on commercial columns and a polycrystalline COF-300-packed column. Especially, the resolution values for m-/p-diiodobenzene and o-/m-diiodobenzene were 4.45 and 2.53. Moreover, the alkylbenzene, monosubstituted aromatics, polycyclic aromatic hydrocarbons, and the mixture of ethylbenzene and styrene were also baseline separated on the single-crystalline COF-300-packed column. This successful application not only confirmed the great potential of single-crystalline COFs in HPLC separation of positional isomers but also pioneered the utilization of single-crystalline COFs in separation science.

l-Cysteine modified metal-organic framework as a chiral stationary phase for enantioseparation by capillary electrochromatography

A new kind of chiral zirconium based metal-organic framework, l-Cys-PCN-222, was synthesized using l-cysteine (l-Cys) as a chiral modifier by a solvent-assisted ligand incorporation approach and utilized as the chiral stationary phase in the capillary electrochromatography system. l-Cys-PCN-222 was characterized by X-ray diffraction, thermogravimetric analysis, X-ray photoelectron spectroscopy, Fourier-transform infrared spectra, nitrogen adsorption/desorption, circular dichroism spectrum, zeta-potential and so on. The results revealed that l-Cys-PCN-222 had the advantages of good crystallinity, high specific surface area (1818 m2 g-1), thermal stability and chiral recognition performance. Meanwhile, the l-Cys-PCN-222-bonded open-tubular column was prepared using l-Cys-PCN-222 particles as the solid phase by 'thiol-ene' click chemistry reaction and characterized by scanning electron microscopy, which proved the successful bonding of l-Cys-PCN-222 to the column inner wall. Finally, the stability, reproducibility and chiral separation performance of the l-Cys-PCN-222-bonded OT column were measured. Relative standard deviations (RSD) of the column efficiencies for run-to-run, day-to-day, column-to-column and runs were 1.39-6.62%, and did not obviously change after 200 runs. The enantiomeric separation of 17 kinds of chiral compounds including acidic, neutral and basic amino acids, imidazolinone and aryloxyphenoxypropionic pesticides, and fluoroquinolones were achieved in the l-Cys-PCN-222-bonded OT column. These results demonstrated that the chiral separation system of the chiral metal-organic frameworks (CMOFs) coupled with capillary electrochromatography has good application prospects.

Capillary coated with three-dimensional covalent organic frameworks for separation of fluoroquinolones by open-tubular capillary electrochromatography

The Schiff-base reaction of 1,3,5-triformylphloroglucinol (Tp) and tetra(4-aminophenyl)methane (TAM) was performed for the synthesis of a three-dimensional covalent organic framework named 3D TpTAM, which was obtained by an ultrasound-assisted method for the first time. The morphology and structure of the synthesized TpTAM were characterized through various methods. Then, TpTAM-coated capillary columns were subsequently prepared by a covalent bonding method within a short time and applied for the separation of fluoroquinolones by capillary electrochromatography (CEC) with good resolution and reproducibility. The intraday relative standard deviations (RSDs) of the retention time and peak areas were 0.88%-0.95% and 2.27%-3.81%, respectively. The interday RSDs of retention time and peak areas were 0.71%-0.89% and 0.88%-3.60%, respectively. The column-to-column RSDs of retention time and peak areas were less than 1.90% and 13.56%, respectively. The interbatch RSDs of retention time and peak areas were less than 3.48% and 3.89%, respectively. The TpTAM-coated capillary columns could be used for no less than 100 runs with no observable changes in the separation efficiency. The separation mechanism was also studied, which indicated that π-π stacking effects, hydrophobic interactions and hydrogen bonding were the main factors. The results revealed that 3D TpTAM should have superior potential as the stationary phase in CEC for chromatographic separation.

In situ room-temperature preparation of a covalent organic framework as stationary phase for high-efficiency capillary electrochromatographic separation

Covalent organic frameworks (COFs), considered as a series of newly emerging porous organic materials, have been widely utilized in separation fields. Herein, a novel COF (TFPB-BD) was first employed as stationary phase for high-efficiency capillary electrochromatographic separation. Benzidine (BD) and 1,3,5-Tris-(4-formylphenyl)benzene (TFPB) were selected as organic linkers and then introduced into the aldehyde group modified capillary for the in situ growth of TFPB-BD onto the capillary inner wall at room temperature. The morphology and formation of TFPB coated capillary column were confirmed by a variety of tools including Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). It's interesting that the TFPB globular crystals with nanoscale were uniformly and densely modified on the capillary inner surface. Hence, the prepared column exhibited prominent separation performance for the test analytes including alkylbenzenes, chlorobenzenes and phenolic compounds with high efficiency and high resolution. The maximum column efficiency can reach about 1.8 × 10⁵ plates•m^-1. Additionally, the high resolutions of anilines, amino acids and parabens were also achieved on the TFPB modified capillary. The precisions (RSDs) of the retention times of alkylbenzenes of intra-day runs (n = 3), inter-day runs (n = 3) and parallel columns (n = 3) were all less than 2.83%. This innovative COF-based stationary phase gives great promise for the chromatographic separation field.

Facile preparation of ethanediamine-β-cyclodextrin modified capillary column for electrochromatographic enantioseparation of Dansyl amino acids

Herein, the fabrication of a fascinating multifunctional cyclodextrin (CD) chiral stationary phase and its chiral separation performance in capillary electrochromatography are proposed. A facile interfacial polymerization was used to anchor ethanediamine-β-cyclodextrin (EDA-β-CD) polymerized with trimesoyl chloride (TMC) and to form the chiral stationary phase (CSP) composite onto the surface wall of the capillary. The characters of prepared columns were confirmed by Fourier transform infrared spectroscopy (FT-IR), X-ray Photoelectron Spectrometer (XPS), scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). This novel CSP offers multi-typical interactions including hydrogen bonding, π-interaction, hydrophobic and electrostatic interaction as well as steric effects which contribute to prominent chiral recognition for Dansyl-DL-amino acids in CEC modes. The EDA-β-CD modified column showed eminent enantioseparation performance towards five Dansyl-DL-amino acids (the DL-forms of valine, threonine, leucine, phenylalanine, serine). Besides, the prepared columns were perfectly reproducible and stable. The relative standard deviations of the enantiomer retention times for intra-day (n = 5), inter-day (n = 3) runs and column-to-columns (n = 3) are below 0.54%, 1.35% and 4.89%, individually. This innovative chiral stationary phase shows a broader application view and scope in chiral recognition domain.

Metal–organic cages for molecular separations

Separation technology is central to industries as diverse as petroleum, pharmaceuticals, mining and life sciences. Metal-organic cages, a class of molecular containers formed via coordination-driven self-assembly, show great promise as separation agents. Precise control of the shape, size and functionalization of cage cavities enables them to selectively bind and distinguish a wide scope of physicochemically similar substances in solution. Extensive research has, thus, been performed involving separations of high-value targets using coordination cages, ranging from gases and liquids to compounds dissolved in solution. Enantiopure capsules also show great potential for the separation of chiral molecules. The use of crystalline cages as absorbents, or the incorporation of cages into polymer membranes, could increase the selectivity and efficiency of separation processes. This Review covers recent progress in using metal-organic cages to achieve separations, with discussion of the many methods of using them in this context. Challenges and potential future developments are also discussed.