Stable Pb2+ ion-selective electrodes based on polyaniline-TiO2 solid contacts

Recent Progress on Potentiometric Sensor Applications Based on Nanoscale Metal Oxides: A Comprehensive Review

Electrochemical sensors have been the subject of much research and development as of late, with several publications detailing new designs boasting enhanced performance metrics. That is, without a doubt, because such sensors stand out from other analytical tools thanks to their excellent analytical characteristics, low cost, and ease of use. Their progress has shown a trend toward seeking out novel useful nano structure materials. A variety of nanostructure metal oxides have been utilized in the creation of potentiometric sensors, which are the subject of this article. For screen-printed pH sensors, metal oxides have been utilized as sensing layers due to their mixed ion-electron conductivity and as paste-ion-selective electrode components and in solid-contact electrodes. Further significant uses include solid-contact layers. All the metal oxide uses mentioned are within the purview of this article. Nanoscale metal oxides have several potential uses in the potentiometry method, and this paper summarizes such uses, including hybrid materials and single-component layers. Potentiometric sensors with outstanding analytical properties can be manufactured entirely from metal oxides. These novel sensors outperform the more traditional, conventional electrodes in terms of useful characteristics. In this review, we looked at the potentiometric analytical properties of different building solutions with various nanoscale metal oxides.

Application of Metal Oxide Nanoparticles in the Field of Potentiometric Sensors: A Review

Recently, there has been rapid development of electrochemical sensors, and there have been numerous reports in the literature that describe new constructions with improved performance parameters. Undoubtedly, this is due to the fact that those sensors are characterized by very good analytical parameters, and at the same time, they are cheap and easy to use, which distinguishes them from other analytical tools. One of the trends observed in their development is the search for new functional materials. This review focuses on potentiometric sensors designed with the use of various metal oxides. Metal oxides, because of their remarkable properties including high electrical capacity and mixed ion-electron conductivity, have found applications as both sensing layers (e.g., of screen-printing pH sensors) or solid-contact layers and paste components in solid-contact and paste-ion-selective electrodes. All the mentioned applications of metal oxides are described in the scope of the paper. This paper presents a survey on the use of metal oxides in the field of the potentiometry method as both single-component layers and as a component of hybrid materials. Metal oxides are allowed to obtain potentiometric sensors of all-solid-state construction characterized by remarkable analytical parameters. These new types of sensors exhibit properties that are competitive with those of the commonly used conventional electrodes. Different construction solutions and various metal oxides were compared in the scope of this review based on their analytical parameters.

Ion-Selective Electrodes with Solid Contact Based on Composite Materials: A Review

Potentiometric sensors are the largest and most commonly used group of electrochemical sensors. Among them, ion-selective electrodes hold a prominent place. Since the end of the last century, their re-development has been observed, which is a consequence of the introduction of solid contact constructions, i.e., electrodes without an internal electrolyte solution. Research carried out in the field of potentiometric sensors primarily focuses on developing new variants of solid contact in order to obtain devices with better analytical parameters, and at the same time cheaper and easier to use, which has been made possible thanks to the achievements of material engineering. This paper presents an overview of new materials used as a solid contact in ion-selective electrodes over the past several years. These are primarily composite and hybrid materials that are a combination of carbon nanomaterials and polymers, as well as those obtained from carbon and polymer nanomaterials in combination with others, such as metal nanoparticles, metal oxides, ionic liquids and many others. Composite materials often have better mechanical, thermal, electrical, optical and chemical properties than the original components. With regard to their use in the construction of ion-selective electrodes, it is particularly important to increase the capacitance and surface area of the material, which makes them more effective in the process of charge transfer between the polymer membrane and the substrate material. This allows to obtain sensors with better analytical and operational parameters. Brief characteristics of electrodes with solid contact, their advantages and disadvantages, as well as research methods used to assess their parameters and analytical usefulness were presented. The work was divided into chapters according to the type of composite material, while the data in the table were arranged according to the type of ion. Selected basic analytical parameters of the obtained electrodes have been collected and summarized in order to better illustrate and compare the achievements that have been described till now in this field of analytical chemistry, which is potentiometry. This comprehensive review is a compendium of knowledge in the research area of functional composite materials and state-of-the-art SC-ISE construction technologies.

Stable Pb(II) ion-selective electrodes with a low detection limit using silver nanoparticles/polyaniline as the solid contact

Solid contact-based ion-selective electrodes (SC-ISEs) based on silver nanoparticles/polyaniline (Ag@PANI) as the solid contact (SC) were successfully prepared. The Ag@PANI SC showed high capacitance and excellent electron transport performance. Owing to the synergetic effects of the Ag nanoparticles and PANI, a GC/Ag@PANI-II/Pb²⁺-ISE (where II refers to a Ag content of 0.01 wt% in the SC layer) showed a low Pb²⁺ detection limit (6.31 × 10^-10 M) with a slope of 29.1 ± 0.3 mV/dec, a fast response (< 5 s), and high stability. GC/Ag@PANI-II/Pb²⁺-ISE exhibited a Nernstian response for Pb²⁺ ions over a wide concentration range (10^-3 to 10^-9 M). After a 3-week operation, GC/Ag@PANI-II/Pb²⁺-ISE responded linearly to Pb²⁺ over the range of 10^-7-10^-3 M, demonstrating good long-term potential stability. Furthermore, the electrode showed excellent reproducibility and repeatability of the potential values and was successfully applied to detect the Pb²⁺ concentration in real samples with a recovery of 97 - 109%. Results suggest that Ag@PANI composites offer good transducer performance in trace ion detection sensors.

Potentiometric extractive sensing of lead ions over a nickel oxide intercalated chitosan-grafted-polyaniline composite

The present research paper reports the extractive potentiometric sensing of lead ions over a chemically functionalized ternary nanocomposite of nickel oxide intercalated chitosan grafted polyaniline (NiO-in-CHIT-g-PANI) prepared by the in situ chemical polymerization and composite formation technique under optimized conditions. The structural, morphological, and physical properties of the composite material were investigated by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and other suitable ASTM methods. The obtained analytical result suggests the formation of a porous hybrid composite matrix with better electrical conductivity ∼ 5.25 × 10^-3 S cm^-1, free interactive carbonyl sites, and evolved aligned crystallinity. Furthermore, a film of the synthesized composite was cast on ITO coated glass by the spin coating technique for potentiometric sensing and the recovery of adsorbed Pb²⁺ ions from natural and artificial water solutions. Under optimum conditions of ∼pH = 7.0 and a temperature of 25 °C, the electrode exhibited potential responses for Pb²⁺ ions in concentrations ranging from 1.0 × 10^-6 M to 1 × 10^-3 M along with a sensitivity of 0.2379 mV μM^-1 cm^-2, response time of 40 s, recovery time of 10 s, and stability for 64 days. The adsorbed Pb²⁺ ions were recovered at a rate of 84% after applying an optimized reverse voltage on the above-used electrodes. The adsorption and desorption mechanism has been explained based on the induced potential due to the electrochemical surface interaction between Pb²⁺ and the NiO-in-CHIT-g-PANI based electrode. The analytical application of the fabricated electrode in the real sample was also explored for the sensing and recovery of the respective metal ions in wastewater samples along with the possibility of optimization of the required metal concentrations.

One-step electrochemical sensor based on an integrated probe toward sub-ppt level Pb2+ detection by fast scan voltammetry

Herein, a one-step electrochemical sensor for selective and sensitive detection of lead ion Pb²⁺ was developed based on an integrated probe meso-tetra(4-carboxyphenyl) porphine (TCPP)-multi-walled carbon nanotubes (MWCNTs)@Fe₃O₄, which is TCPP-modified magnetic multi-walled carbon nanotubes. In the integrated probe, TCPP is a porphyrin with a specific cavity structure which could selectively chelate with Pb²⁺, MWCNTs with good electric conductivity provide a place to load TCPP and form a specific adsorption state of Pb²⁺ on the electrode surface, and Fe₃O₄ enables the rapid separation and one-step fabrication of the electrochemical sensor. Based on it, the sample pre-enrichment, separation and determination can be integrated, making the whole process very fast and simple. In addition, fast scan voltammetry (FSV) with a scan rate up to 200 V/s could be used to improve the detection sensitivity greatly, benefitting from the specific adsorption state formed. Under the optimal conditions obtained through orthogonal experiments including adsorption time, integrated probe dosage and solution pH, there was a good linear relationship between the peak current and Pb²⁺ concentration ranging from 2.0 × 10^-4 μg L^-1 to 2.0 × 10^-3 μg L^-1, with the limit of detection (LOD) being 6.7 × 10^-5 μg L^-1 (S/N = 3) i.e. 0.067 ppt. Analysis of actual water samples was successful. Therefore, being simple, fast, selective and sensitive, the one-step electrochemical sensor proposed has a good potential in practical applications.

Solid-Contact Ion-Selective Electrodes: Response Mechanisms, Transducer Materials and Wearable Sensors

Wearable sensors based on solid-contact ion-selective electrodes (SC-ISEs) are currently attracting intensive attention in monitoring human health conditions through real-time and non-invasive analysis of ions in biological fluids. SC-ISEs have gone through a revolution with improvements in potential stability and reproducibility. The introduction of new transducing materials, the understanding of theoretical potentiometric responses, and wearable applications greatly facilitate SC-ISEs. We review recent advances in SC-ISEs including the response mechanism (redox capacitance and electric-double-layer capacitance mechanisms) and crucial solid transducer materials (conducting polymers, carbon and other nanomaterials) and applications in wearable sensors. At the end of the review we illustrate the existing challenges and prospects for future SC-ISEs. We expect this review to provide readers with a general picture of SC-ISEs and appeal to further establishing protocols for evaluating SC-ISEs and accelerating commercial wearable sensors for clinical diagnosis and family practice.

Recent advances in solid-contact ion-selective electrodes: functional materials, transduction mechanisms, and development trends

This article presents a comprehensive overview of recent progress in the design and applications of solid-contact ion-selective electrodes (SC-ISEs).