Facile synthesis of a core-shell structured magnetic covalent organic framework for enrichment of organophosphorus pesticides in fruits

Dual COF functionalized magnetic MXene composite for enhancing magnetic solid phase extraction of thiophene compounds from oilfield produced waters prior to GC-MS/MS analysis

In this study, a novel COFTABT@COFTATp modified magnetic MXene composite (CoFe2O4 @Ti3C2 @COFTABT@COFTATp) was synthesized by Schiff base reaction and irre-versible enol-keto tautomerization, and employed to establish a sensitive monitoring method for six thiophene compounds in oilfield produced water samples based on magnetic solid-phase extraction (MSPE) prior to gas chromatography coupled with a triple quadruple mass spectrometer (GC-MS/MS). The designed magnetic materials exhibited unexpected enrichment ability to target thiophene compounds and achieved good extraction efficiencies ranging from 83 % to 98 %. The developed MSPE/GC-MS/MS method exhibited good linearity in the range of 0.001-100 μg L-1, and obtained lower limits of detection ranging from 0.39 to 1.9 ng L-1. The spiked recoveries of thiophene compounds obtained in three oilfield produced water samples were over the range of 96.26 %-99.54 % with relative standard deviations (RSDs) less than 3.7 %. Notably, benzothiophene, 4-methyldibenzothiophene and 4,6-dimethyldibenzothiophene were detected in three oilfield-produced water samples. Furthermore, the material still kept favorable stability after six recycling experiments. The adsorption kinetics, adsorption isotherms as well as adsorption thermodynamics of thiophene compounds were investigated in detail to provide insight into the mechanisms. Overall, the present work contributed a promising strategy for designing and synthesizing new functionalized materials for the enrichment and detection of typical pollutants in the environment.

Magnetic Covalent Organic Frameworks-Fundamentals and Applications in Analytical Chemistry

Magnetic covalent organic frameworks are new emerging materials which, besides many other applications, have found unique applications in analytical chemistry as separating media and adsorbents. They have outstanding features such as special morphology, chemical and thermal stability, high adsorption capacity, good magnetic response, high specific surface area, uniform pore size distribution, strong π-π interactions with analytes and high reusability that makes reported studies on their properties and applications increased in the recent years. After discussing the methods of synthesis of MCOFs with different geometries that cause their special physic-chemical properties, this review focuses on their high potential which has been exhibited in various applications in extraction and pre-concentration of different analytes such as organic compounds, heavy metal ions and biological samples. The article also highlights the applications of magnetic covalent organic frameworks in other chemical analysis such as adsorbent and being used in sensors.

Advances on multiclass pesticide residue determination in citrus fruits and citrus-derived products - A critical review

The application of agrochemicals in citrus fruits is widely used to improve the quality of crops, increase production yields, and prolong post-harvest life. However, these substances are potentially toxic for humans and the ecosystem due to their widespread use, high stability, and bioaccumulation. Conventional techniques for determining pesticide residues in citrus fruits are chromatographic methods coupled with different detectors. However, in recent years, the need for analytical strategies that are less polluting for the environment has encouraged the appearance of new alternatives, such as sensors and biosensors, which allow selective and sensitive detection of pesticide residues in real time. A comprehensive overview of the analytical platforms used to determine pesticide residues in citrus fruits and citrus-derived products is presented herein. The review focuses on the evolution of these methods since 2015, their limitations, and possible future perspectives for improving pesticide residue determination and reducing environmental contamination.

Biomass waste-derived magnetic material coated with dual-dummy-template molecularly imprinted polymer for simultaneous extraction of organophosphorus and carbamate pesticides

An eco-friendly biomass waste-derived magnetic material coated with a dual-dummy-template molecularly imprinted polymer was fabricated using aqueous ethanol as a green porogen, lower amounts of toxic compounds as template molecules, and tyrosine and tryptophan as biocompatible binary monomers. The binding characteristics and selectivity of the material toward pesticides were assessed. High adsorption capacities ranging from 150.11 to 509.09 mg g-1 and imprinting factors reaching 2.2 were achieved within just 30 s. The material was applied for extraction of organophosphorus and carbamate pesticides prior to HPLC analysis. Under the optimum conditions, low limits of detection and quantitation were achieved, with ranges of 0.05-1.49 μg/L and 0.18-5.00 μg/L, respectively. The established approach enables efficient analysis of vegetable and fruit samples, yielding satisfactory recoveries ranging between 80 and 110 %. The method showed promise as an analytical method for the sensitive enrichment of pesticide residues in vegetable and fruit samples.

Ultrasonic synthesis of magnetic covalent organic frameworks and application magnetic solid phase extraction for rapid adsorption of trace bisphenols in food samples

A simple ultrasonic synthesis strategy was developed for a novel magnetic covalent organic framework. Firstly, the Fe3O4 nanoparticles were encapsulated by imine-type COF, which generated by the Schiff reaction of 4,4',4''-(1,3,5-Triazine-2,4,6-triyl)-trianiline (TAPT) and tris(4-formylphenyl)-amine (TFPA) using ultrasonic synthesis method within 2 h. The synthesised nanocomposites showed a sizeable specific surface area, and high adsorption capacity. A fast, sensitive MSPE method with Fe3O4@TAPT-TFPA-COF as adsorbent for analysing bisphenol compounds was developed. This method's advantages were simple operation, short extraction time, and avoidance of the use of centrifugal equipment. The method validation indicate that this method exhibited superior linearity, and detection limits range between 0.33 and 0.60 μg L-1. The recoveries of BPs ranged from 74.7 % to 107.0 %, with relative standard deviations of less than 3.8 % in water, milk, vinegar, and soy sauce samples. The proposed method was successfully applied for extracting BPs in food samples.

Membrane-protected magnetic covalent organic framework for efficient extraction of estrogens in dairy products

The presence of estrogens residues in dairy products is a growing concern due to their potential health risk. Herein, in this study, we have developed a membrane-protected magnetic solid-phase extraction (MP-MSPE) method that utilized a magnetic adsorbent (Fe3O4@COF-LZU1) with in-situ growth for the efficient extraction of estrone (E1), 17β-estradiol (E2), and estriol (E3). When combined with HPLC-FLD, this method allows for the efficient detection of estrogens in dairy products. The stability of the MP-MSPE was improved by the presence of a dialysis membrane, which remained a high extraction efficiency (90 %) even after ten reuse cycles. The hydrogen bonding, π-π interactions and pore size effect contribute to the excellent adsorption of three estrogens onto Fe3O4@COF-LZU1. Under optimal conditions, the method exhibits a low detection limit (0.01-0.15 μg L-1), wide linear range (0.1-800 μg L-1), and favorable recoveries (77.3 %-109.4 %) at three concentration levels (10, 50 and 100 μg L-1). This proposed method is characterized by its simplicity, high efficiency and eco-friendliness, making it a promising approach for extracting estrogens from dairy products.

Adsorption Performance of Magnetic Covalent Organic Framework Composites for Bisphenol A and Ibuprofen

As typical environmental endocrine disruptors and nonsteroidal anti-inflammatory drugs, bisphenol A and ibuprofen in water supplies can cause great harm to the ecological environment and human health. In this study, magnetic covalent organic framework composites Fe₃O₄@COF-300 were synthesized by the hydrothermal method and used to remove bisphenol A and ibuprofen from water. Fe₃O₄@COF-300 could be rapidly separated from the matrix by external magnetic fields, and could selectively adsorb bisphenol A and ibuprofen in the presence of coexisting compounds such as phenol, Congo red, and amino black 10B. The removal efficiency of ibuprofen was 96.12-98.52% at pH in the range of 2-4 and that of bisphenol A was 92.18-95.62% at pH in the range of 2-10. The adsorption of bisphenol A and ibuprofen followed a pseudo-second-order kinetic and Langmuir model, and was a spontaneous endothermic process with the maximum adsorption amounts of 173.31 and 303.03 mg∙g^-1, respectively. The material presented favorable stability and reusability, and the removal efficiency of bisphenol A and ibuprofen after 5 cycles was still over 92.15% and 89.29%, respectively. Therefore, the prepared composite Fe₃O₄@COF-300 exhibited good performance in the adsorption of bisphenol A and ibuprofen in water.

Synthesis of a magnetic covalent organic framework for extraction and separation of ultraviolet filters in beverage samples

In this study, a novel magnetic covalent organic framework (Fe₃O₄@TAPB-BTT) was successfully synthesized under mild conditions. The prepared magnetic COF exhibited large surface area (876.3 m² g^-1), porous feature as well as sizeable π-conjugated network structure. Due to the above advantages, Fe₃O₄@TAPB-BTT showed good adsorptive performance for ultraviolet (UV) filters with adsorption capacities ranging from 80.8 to 120.1 mg g^-1. Then the adsorbent was applied to magnetic solid phase extraction (MSPE) of UV filters in beverage samples, followed by UHPLC-MS/MS analysis. The established method showed good accuracy, precision, and reproducibility with satisfactory recoveries (76.9-95.6 %), low limits of detection (0.001-0.15 µg/L), and low relative standard deviations (<9.8 %). Besides, the adsorbent can be reutilized at least ten times, demonstrating satisfactory reusability. This work provided an effective method for the analysis and determination of UV filters in drinks.

Room temperature fabrication of magnetic covalent organic frameworks for efficient enrichment of parabens in water

A novel 4 + 2 covalent magnetic organic framework (COF) with core-shell structure was synthesized for the first time with N, N, N', N'-Tetrakis (4-aminophenyl)-1, 4- benzenediamine (TPDA) and 2, 6-Pyridinedicarboxaldehyde (PCBA) at room temperature. The synthesized magnetic TPDA-PCBA-COF has a large specific surface area and superparamagnetism, which makes it an ideal sorbent for trace analytes enrichment. To this end, we combined it with magnetic solid phase extraction (MSPE) to enrich trace parabens in environmental water. The parameters affecting the enrichment efficiency of magnetic solid phase extraction, such as the amount of Fe₃O₄@TPDA-PCBA-COF, extraction time, pH of samples, salt concentration, desorption solvent volume and desorption time, were optimized. A simple method for extraction and determination of parabens in water samples by MSPE combined with high performance liquid chromatography (HPLC) was established under optimized conditions. The validation results revealed that the linear ranges were at 1.0-5.0 × 10² ng mL^-1 with R value between 0.9915 and 0.9999, the spiked recoveries were in the range of 82.8% to 99.9% and RSDs were lower than 10%. The method was further applied to the determination of parabens in water samples, with recoveries in the range of 82.2% to 110.0% and RSDs ≤ 7.7%. These results suggest that the magnetic TPDA-PCBA-COF could be used as a promising adsorbent for efficient extraction and quantitation of parabens in environmental water samples.

Recent advances and applications of magnetic covalent organic frameworks in food analysis

Recently, covalent organic frameworks (COFs) have been widely used to prepare magnetic adsorbents for food analysis due to their highly tunable porosity, large specific surface area, excellent chemical and thermal stability and large delocalised π-electron system. This review summarises the main types and preparation methods of magnetic COFs and their applications in food analysis for the detection of pesticide residues, veterinary drugs, endocrine-disrupting phenols and estrogens, plasticisers and other food contaminants. Furthermore, challenges and future outlook in the development of magnetic COFs for food analysis are discussed.

Fluffy ball-like magnetic covalent organic frameworks for adsorption and removal of organothiophosphate pesticides

Organothiophosphate pesticides (OPPs) are the most commonly used pesticides, and their environmental migration brings serious water pollution and significant danger to human health, and thus it is urgent to develop effective technologies for removal of OPPs from water. Herein, magnetic covalent organic framework (COF) with a triazine skeleton was fabricated for enhanced adsorption and removal of OPPs from water. Magnetic COF has a fluffy ball-like structure, high crystallinity, large BET surface area (1543 m² g^-1), and regular mesopores (~3.1 nm). Therefore, it displayed high adsorption rates and large adsorption capacities for four typical OPPs, pyridafenthion, phoxim, pyrimitate, and phorate. Based on adsorption kinetic and isotherms investigations, the batch experimental data of magnetic COF was effectively modeled by pseudo-second-order kinetics and the Freundlich isothermal model. The equilibrium adsorption capacities of magnetic COF composite for OPPs ranged from 163.9 to 178.6 mg g^-1, which were about 10 times higher than the amorphous magnetic composite. The adsorption mechanism was further explored to verify the contributions of π-π, CH⋯π, and CH⋯S interactions to the adsorption of OPPs on the crystalline magnetic COF. Furthermore, the high removal rate of OPPs from the environmental water and reusability further indicated its potential in real applications as an effective adsorption material.

Recent progress in organic-inorganic hybrid materials as absorbents in sample pretreatment for pesticide detection

Sample pretreatment is essential for trace analysis of pesticides in complex food and environment matrices. Recently, organic-inorganic hybrid materials have gained increasing attention in pesticide extraction and preconcentration. This review highlighted the common organic-inorganic hybrid materials used as absorbents in sample pretreatment for pesticide detection. Furthermore, the preparation and characterization of organic-inorganic hybrid materials were summarized. To obtain a deep understanding of adsorption toward target analytes, the adsorption mechanism and absorption evaluation were discussed. Finally, the applications of organic-inorganic hybrid materials in sample pretreatment techniques and perspectives in the future are also discussed.

Efficient extraction of trace organochlorine pesticides from environmental samples by a polyacrylonitrile electrospun nanofiber membrane modified with covalent organic framework

Detecting and analyzing of the trace organochlorine pesticides (OCPs) in the real water has become a big challenge. In this work, a novel functional electrospun nanofiber membrane (PAN@COFs) was synthesized through the in situ growth of covalent organic frameworks (COFs) on a polyacrylonitrile electrospun nanofiber membranes under room temperature and used in the solid-phase micro-extraction (SPME) to enrich trace organochlorine pesticides (OCPs) in water. The resulted PAN@COFs composite consisted of numerous nanofibers coated ample porous COFs spheres (~ 500 nm) and owned stable crystal structure, abundant functional groups, good stability. In addition, the enrichment experiments clearly revealed that PAN@COFs exhibited rather outstanding performance on adsorbing the trace OCPs (as low as 10 ng L^-1) with the enrichment of 482-2686 times. Besides, PAN@COFs displayed good reusability and could be reused 100 times. Notably, in the real water samples (sea water and river water), the high enrichment factors and recovery rates strongly confirmed the feasibility of PAN@COFs for detecting the trace OCPs. Furthermore, due to the synergy of π-π stacking interaction and hydrophobic interaction between the OCPs molecules and PAN@COFs, the OCPs could be efficiently adsorbed on PAN@COFs, even under the extremely low driving force.

[Application of imine covalent organic frameworks in sample pretreatment]

Imine covalent organic frameworks (I-COFs), including imine-linked COFs and hydrazone-linked COFs, are a new type of crystalline porous organic materials constructed by the condensation of organic monomers by the Schiff-base reaction. Because they are composed of lightweight elements linked by strong covalent bonds, I-COF materials possess the advantages of low skeleton density, large surface area, high porosity, abundant monomer species, controllable pore size, functionalized structure, diverse synthetic methods, excellent adsorption performance, outstanding physical and chemical stabilities, etc. In recent years, interest in the field of I-COFs has increased tremendously because of their exceptional performance and broad applications in gas storage, gas separation, catalysis, sensing, photoelectric materials, sample pretreatment, drug delivery, and other fields. To date, imine bonds are one of the most widely used covalent bonds in COFs, and represent one of the most important ways to obtain I-COFs with excellent chemical stabilities. The synthesis methods for I-COFs include solvothermal synthesis, microwave synthesis, mechanochemical grinding synthesis, and room-temperature synthesis methods. Solvothermal synthesis is the most extensively used method for the production of I-COFs with high specific surface areas and good thermal stabilities. The microwave synthesis method is conducive to the rapid synthesis of COFs in industry, providing a more time-saving, simpler, and safer route for large-scale preparation of I-COFs. The mechanochemical grinding synthesis of porous solids has gained importance as an alternative to conventional solvothermal synthesis, because the process is quick, environment-friendly, and potentially scalable. The room-temperature method is characterized by mild reaction conditions and rapid reactions. It is an energy-saving, economic, safe, and green synthesis method, which has emerged as a hot spot in the preparation of I-COFs in recent years. Research progress over the past years on the application of I-COFs in the field of materials science has undoubtedly established the basis of its application in analytical chemistry. Owing to the excellent physical and chemical properties of I-COF materials, they are suitable for use as separation and enrichment media for trace target compounds in complex samples. The high specific surface area and porosity, extended conjugate network skeleton, and π-electron-rich nature of the materials endow it with a high adsorption capacity. These materials are highly enriched in target analytes by π-π interactions, acid-base interactions, donor-acceptor interactions, hydrogen bonding, hydrophobic interactions, and other intermolecular interactions. Precise control of the microporous structure of I-COFs was obtained by controlling the chain length, geometric structure, doping elements, and substituent groups of the organic monomers. Selective enrichment of target trace substances was achieved by modifying the groups of I-COFs based on the principle of host guest adaptation, molecular sieving, or microporous filling effect. At present, research on the synthesis of I-COF materials is in the stage of rapid development, and many I-COFs with excellent properties and great application potential have been synthesized, allowing widespread application of I-COFs in sample pretreatment medium. This review summarizes the current state-of-the-art on the main types and synthetic methods of I-COFs, as well as the applications of I-COFs in solid-phase extraction, magnetic solid-phase extraction, dispersive solid-phase extraction, and solid-phase microextraction. The prospects of I-COFs in sample pretreatment are also presented.

Chromatographic techniques for the analysis of organophosphate pesticides with their extraction approach: a review (2015-2020)

In agriculture, a wide range of OPPs has been employed to boost crop yield, quality, and storage life. However, due to the ever-increasing population and rapid urbanization, pesticide use has surged in recent years. These compounds are exceedingly poisonous to humans, and despite the fact that specific legislation prohibits their use, the frequency of toxic and/or fatal incidents, as well as current statistics, suggest that they are currently accessible. As a result, determining the exposure to these substances as well as their detection (and that of their metabolites) in different types of exposed samples has become a hot issue in terms of quality and safety concerns. However, developing tools for the evaluation of these substances is a critical challenge for laboratories. Various chromatographic-based methods reported in the period of 2015-2020 have been developed, which are summarized and critically reviewed in this article, including the extraction of the target OPPs from different kinds of matrices. A comparison among the extraction and analysis techniques has been made in the current review article.

A ratiometric electrochemical biosensor via alkaline phosphatase mediated dissolution of nano-MnO2 and Ru(III) redox recycling for the determination of dimethoate

A sensitive and ratiometric electrochemical biosensor was developed for the determination of dimethoate via alkaline phosphatase (ALP) mediated dissolution of nano-MnO₂ and [Ru(NH₃)₆]³⁺(Ru(III)) redox recycling. The electroactive probe Ru(III) was adsorbed on the nano-MnO₂ with the high specific surface area through electrostatic interaction to form the MnO₂-Ru(III) nanocomposite, which was then fixed on the surface of the glassy carbon electrode. When the dimethoate inhibited the catalytic activity of ALP in a homogeneous system, the hydrolysate L-ascorbic acid (AA) produced by ALP hydrolysis of L-ascorbic acid-trisodium 2-phosphate (AAP) decreased. The solution was then incubated with a glassy carbon electrode modified by MnO₂-Ru(III). At this time, only a small amount of MnO₂-Ru(III) was decomposed and Ru(III) was rapidly electroreduced to Ru(II) on the surface of the electrode. The in-situ produced Ru(II) was chemically oxidized back to Ru(III) by Fe(III). The redox recycling of Ru(III) was completed and the Ru(III) reduction current signal was amplified. The process consumed part of Fe(III) to reduce the reduction current signal of Fe(III), and the ratio of the two reduction currents (I_Ru(III)/I_Fe(III)) increased significantly. The I_Ru(III)/I_Fe(III) value increased with the increase of dimethoate concentration in the linear range of 0.01-300 ng mL^-1, and the detection limit was 6.3 pg mL^-1. It has been successfully applied to the determination of dimethoate in oilseed rape and lettuce with a satisfactory result.

A novel electrochemiluminescence aptasensor based on copper-gold bimetallic nanoparticles and its applications

In this work, a novel electrochemiluminescence (ECL) aptasensor was structured for the detection of four organophosphorus pesticides (OPs). Firstly, multi-walled carbon nanotubes (MWCNTs) were used to create a favorable loading interface for the fixation of tris (2, 2'-bipyridyl) ruthenium (II) (Ru (bpy)₃²⁺). At the same time, copper (core)-gold (shell) bimetallic nanoparticles (Cu@Au NPs) were synthesized in the aqueous phase for the sensor construction. Gold nanoparticles (Au NPs) could promote the electrochemiluminescence intensity of Ru (bpy)₃²⁺ with high efficiency by catalyzing the oxidation process of tri-n-propylamine (TPrA). Compared with the Au NPs, Cu@Au NPs increased the solid loading of Au NPs by virtue of the large specific surface area of copper nanoparticles (Cu NPs), which could further improve the sensitivity of aptasensor. When OPs were added, the ECL intensity was significantly reduced, and the concentration of OPs could be detected through the ECL intensity. Under the optimum conditions, the aptasensor had a wider dynamic range and ultra-low detection limit for the detection of four pesticides: profenofos, isocarbophos, phorate, and omethoate, and their detection limits were 3 × 10^-4 ng/mL, 3 × 10^-4 ng/mL, 3 × 10^-3 ng/mL, and 3 × 10^-2 ng/mL respectively (S/N = 3). The aptasensor had the merits of good stability, reproducibility, and specificity, and had a favorable recovery rate in detecting OPs residues in vegetables. This work provided an effective method for the construction of a simple, rapid, and sensitive biosensor.

Synthesis of metal-organic framework @molecularly imprinted polymer adsorbents for solid phase extraction of organophosphorus pesticides from agricultural products

The novel core-shell structural zeolitic imidazolate framework-8 @molecularly imprinted polymers were successfully synthesized by surface imprinting technique and used as adsorbents for solid-phase extraction of organophosphorus pesticides. The obtained hybrid composites were characterized by scanning electron microscopy, transmission electron microscopy and Fourier-transform infrared, and their adsorbing and recognition performance were evaluated by binding experiments. The results showed that zeolitic imidazolate framework-8 @molecularly imprinted polymers presented a typically core-shell structure with molecularly imprinted shell (about 50 nm) homogeneously polymerized on the surface of zeolitic imidazolate framework-8 core, and exhibited specific recognition towards organophosphorus pesticides with fast adsorption capacity. The adsorption and desorption conditions including sample loading solvent, sample pH, washing and elution solvent were optimized. Under optimum conditions, the solid-phase extraction based on zeolitic imidazolate framework-8 @molecularly imprinted polymers combined with high liquid chromatography-tandem mass spectrometry method for determining organophosphorus pesticides was established and exhibited good linearity (R² ≥ 0.9927) in the range of 1-200 µg/L. With spiked at three different concentration levels in agricultural products (cauliflower, radish, pear, muskmelon), the recoveries ranged from 82.5% to 123.0% with relative standard deviations lower than 8.24%. The developed method was sensitive, convenient and efficient. More importantly, this study could provide a promising strategy for designing new adsorbents with extremely fast mass transfer rate for other potential trace contaminants.

Integrated QuEChERS strategy for high-throughput multi-pesticide residues analysis of vegetables

An integrated QuEChERS strategy was developed by combining the extraction and purification processes into a single step. All of the pretreatment procedures could be performed in one tube within 5 min with the aid of magnetic nanoparticles and careful optimization of the key parameters, including the dosages of the sorbents (magnetic nanoparticles, C18, and graphitized carbon black), dehydrating and salting out reagents. The optimal method was validated and compared with the conventional QuEChERS method, demonstrating its clear superiority in terms of operating procedure, sample pretreatment time, and reagent dosages while affording equivalent pesticide recoveries and matrix effects. Further application of this method was performed to analyze 127 pesticide residues in solanaceous vegetables (tomato, pepper, and eggplant), leafy vegetables (brassica campestris and cabbage), legumes (green beans and cowpea), melon-type vegetables (cucumber and towel gourd), and a root vegetable (water bamboo), with the mean recoveries of the pesticides in the individual vegetable samples ranging from 70.6 to 92.8%. The method LOQs for these pesticides ranged from 10 to 50 μg/kg depending on the matrix. These results fully confirmed its wide applicability and versatility for achieving robust, rapid, and high-throughput multi-pesticide residues analysis in vegetable samples. More importantly, the developed strategy provides a greener and more "QuEChERS" design concept, which could be applied to the analysis of numerous types of pesticide residues in various matrices.

Recent advances in porous organic frameworks for sample pretreatment of pesticide and veterinary drug residues: a review

Rapid and accurate detection of pesticide and veterinary drug residues is a continuing challenge because of the complex matrix effects. Thus, appropriate sample pretreatment is a crucial step for the effective extraction of the analytes and removal of the interferences. Recently, the development of nanomaterial adsorbents has greatly promoted the innovation of food sample pretreatment approaches. Porous organic frameworks (POFs), including polymers of intrinsic microporosity, covalent organic frameworks, hyper crosslinked polymers, conjugated microporous polymers, and porous aromatic frameworks, have been widely utilized due to their tailorable skeletons and pores as well as fascinating features. This review summarizes the recent advances for POFs to be utilized in adsorption and sample preparation of pesticide and veterinary drug residues. In addition, future prospects and challenges are discussed, hoping to offer a reference for further study on POFs in sample pretreatment.

Eco-friendly fabrication of a magnetic dual-template molecularly imprinted polymer for the selective enrichment of organophosphorus pesticides for fruits and vegetables

A magnetic dual-template molecularly imprinted polymer (DMIP) was successfully prepared in an aqueous medium and used as a sorbent for the selective extraction of organophosphorus pesticides prior to analysis by high-performance liquid chromatography (HPLC). The binding properties and selectivity of DMIP toward organophosphorus were evaluated and compared with those of a non-imprinted polymer. The established magnetic dispersive solid-phase extraction (MDSPE) method using DMIP exhibited fast enrichment of the target analytes within 60 s for adsorption and 30 s for desorption. Good linearities in the range of 0.5-2000 μg L^-1 with coefficients of determination (R²) greater than 0.9930 were observed. The method provides low limits of detection of 0.062-0.195 μg L^-1 and limits of quantification of 0.210-0.640 μg L^-1 with relative standard deviations of less than 9.5% for intra- and inter-day analyses. The enrichment factors ranged from 464 to 621. Satisfactory recoveries ranged from 81.3 to 110.0% with relative standard deviations below 11%.

Capillary coated with three-dimensional covalent organic frameworks for separation of fluoroquinolones by open-tubular capillary electrochromatography

The Schiff-base reaction of 1,3,5-triformylphloroglucinol (Tp) and tetra(4-aminophenyl)methane (TAM) was performed for the synthesis of a three-dimensional covalent organic framework named 3D TpTAM, which was obtained by an ultrasound-assisted method for the first time. The morphology and structure of the synthesized TpTAM were characterized through various methods. Then, TpTAM-coated capillary columns were subsequently prepared by a covalent bonding method within a short time and applied for the separation of fluoroquinolones by capillary electrochromatography (CEC) with good resolution and reproducibility. The intraday relative standard deviations (RSDs) of the retention time and peak areas were 0.88%-0.95% and 2.27%-3.81%, respectively. The interday RSDs of retention time and peak areas were 0.71%-0.89% and 0.88%-3.60%, respectively. The column-to-column RSDs of retention time and peak areas were less than 1.90% and 13.56%, respectively. The interbatch RSDs of retention time and peak areas were less than 3.48% and 3.89%, respectively. The TpTAM-coated capillary columns could be used for no less than 100 runs with no observable changes in the separation efficiency. The separation mechanism was also studied, which indicated that π-π stacking effects, hydrophobic interactions and hydrogen bonding were the main factors. The results revealed that 3D TpTAM should have superior potential as the stationary phase in CEC for chromatographic separation.

Applications of covalent organic frameworks and their composites in the extraction of pesticides from different samples

Pesticides are used extensively in a wide range of applications and due to their high rate of consumption, they are ubiquitous in the different media and samples like environment, water sources, air, soil, biological materials, wastes (liquids, solids or sludges), vegetables and fruits, where they can persist for long periods. Pesticides often have hazardous side effects and can cause a range of harmful diseases like Parkinson, Alzheimer, asthma, depression and anxiety, cancer, etc, even at low concentrations. To this end, extraction, pre-concentration and determination of pesticides from various samples presents significant challenges caused by sample complexity and the low concentrations of them in many samples. Often, direct extraction and determination of pesticides are impossible due to their low concentrations and the complexity of samples. The main goals of sample preparation are removing interfering species, pre-concentrating target analyte/s and converting the analytes into more stable forms (when needed). The most popular approach is solid-phase extraction due to its simplicity, efficiency, ease of operation and low cost. This method is based on using a wide variety of materials, among which covalent organic frameworks (COFs) can be identified as an emerging class of highly versatile materials exhibiting advantageous properties, such as a porous and crystalline structure, pre-designable structure, high physical and chemical stability, ease of modification, high surface area and high adsorption capacity. The present review will cover recent developments in synthesis and applications of COFs and their composites for extraction of pesticides, different synthesis approaches of COFs, possible mechanisms for interaction of COFs-based adsorbents with pesticides and finally, future prospects and challenges in the fabrication and utilization of COFs and their composites for extraction of pesticides.

Fabrication of magnetic-responsive controlled-release herbicide by a palygorskite-based nanocomposite

In this work, a type of magnetic-responsive controlled-release herbicide (MCRH) was developed using a nanocomposite including palygorskite (Pal), ferroferric oxide (Fe₃O₄), glyphosate (Gly), and amino silicon oil (ASO). In this system, Pal with the structure of micro/nanonetworks can bind a large quantity of Gly and Fe₃O₄. The movement of Fe₃O₄ particles can be driven by a magnetic field to ensure the controlled release of pesticides. Gly, which is a type of nonselective herbicide, is widely used for weed control. In addition, ASO was selected as the coating agent to prevent Gly from rapidly releasing. In this work, the effects of the magnetic field, temperature, and coexisting ions on the release ratio of pesticides were investigated, and the results suggest that MCRH could effectively improve the utilization efficiency (UE) of Gly. In addition, zebrafish experiments indicate that MCRH has better biosafety than Gly.

Enhanced adsorption of malathion and phoxim by a three-dimensional magnetic graphene oxide-functionalized citrus peel-derived bio-composite

By integrating the steps of direct magnetization and one-pot pyrolysis, a three-dimensional (3D) magnetic graphene oxide-functionalized citrus peel-derived bio-composite (mGOBC) was synthesized and characterized successfully, and it was proved to possess a three-dimensional (3D) porous architecture and graphitic structure. Its potential as an enrichment adsorbent was investigated using adsorption kinetics and adsorption isotherm models to establish an effective analytical method for the determination of organophosphorus pesticides (OPPs) in vegetables. The experimental results indicated that the adsorption was better fitted with the pseudo second order model and Langmuir isotherm model, and the maximum adsorption capacities for malathion and phoxim were 25.26 mg g-1 and 42.31 mg g-1, respectively. It was found that the graphitic structure of mGOBC resulted in π-π EDA (electron donor-acceptor) interaction with the benzene rings, electron-donating N, P, and S atoms in the analytes, which assisted adsorption. Subsequently, Plackett-Burman (P-B) experimental design, central composite design (CCD) and response surface methodology (RSM) were employed to develop an analytical method based on the mGOBC adsorbent. Under optimal conditions, the developed method is accurate and precise. The novel synthesized mGOBC can efficiently achieve removal and trace determination of harmful OPPs.

Fast construction of core-shell structured magnetic covalent organic framework as sorbent for solid-phase extraction of zearalenone and its derivatives prior to their determination by UHPLC-MS/MS

Magnetic covalent organic framework nanocomposite denoted as Fe₃O₄@TAPB-Tp with core-shell structure was fabricated via a simple template-mediated precipitation polymerization method at mild conditions. The polyimine network shell was created through the polymerization of 1,3,5-tris(4-aminophenyl)-benzene (TAPB) and 1,3,5-triformyl-phloroglucinol (Tp) in tetrahydrofuran (THF) by the Schiff-base reaction. Featuring with large specific surface area (163.19 m² g^-1), good solution dispersibility, and high stability, the obtained Fe₃O₄@TAPB-Tp exhibited high adsorption capacities and fast adsorption for zearalenone and its derivatives (ZEAs). The adsorption isotherms showed multilayer adsorption dominated at low concentration and monolayer adsorption at high concentration between the interface of ZEAs and Fe₃O₄@TAPB-Tp. With the Fe₃O₄@TAPB-Tp as sorbent, a magnetic solid-phase extraction-ultrahigh performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method was established for simultaneous adsorption and detection of five ZEAs in complex samples. The proposed method displayed favorable linearity, low limits of detection (0.003 ~ 0.018 μg kg^-1), and good repeatability (2.37~10.4%). The developed method has been applied for real sample analysis, with recoveries of 81.27~90.26%. These results showed that Fe₃O₄@TAPB-Tp has a good application potential for the adsorption of ZEAs in food samples. Magnetic covalent organic framework nanocomposite (Fe₃O₄@TAPB-Tp) were quickly fabricated at mild conditions and used as effective adsorbent for magnetic solid-phase extraction of zearalenone and its derivatives (ZEAs) from food samples prior to ultrahigh performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) analysis.

A core-shell structured magnetic covalent organic framework as a magnetic solid-phase extraction adsorbent for phenylurea herbicides

In this work, a core-shell structured magnetic covalent organic framework named as M-TpDAB was constructed with 3,3'-diaminobenzidine (DAB) and 1,3,5-triformylphloroglucinol (Tp) as building units. M-TpDAB was characterized by infrared spectroscopy, nitrogen adsorption-desorption isotherms, powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Using the M-TpDAB as adsorbent, a simple and highly effective method was proposed for preconcentrating phenylurea herbicides before high performance liquid-phase chromatography analysis. In the optimized conditions, a good linearity was achieved within the range of 0.15-100 ng mL^-1 for water sample, 1.0-100.0 ng mL^-1 for tea drink samples. The limits of detection for the analytes were 0.05-0.15 ng mL^-1 for water sample and 0.30-0.50 ng mL^-1 for drink samples. Satisfactory recoveries of spiked target compounds were in the range of 84.6%-105% for water sample and 80.3%-102% for tea drink samples. Finally, the M-TpDAB based method was successfully used to determine phenylurea herbicides in tea drinks and water samples, demonstrating a good alternative for analyzing trace level of phenylurea herbicides in water samples.

Facile synthesis of covalent organic frameworks functionalized with graphene hydrogel for effectively extracting organophosphorus pesticides from vegetables

A novel covalent organic framework material (3DGA@COFs), for use as a solid-phase dispersion sorbent, has been synthesized for extracting organophosphorus pesticides (OPs) from vegetables. The prepared 3DGA@COFs material exhibited many advantageous features, including a large specific surface area (127.95 m²/g) and high pore volume (0.0344 cm³/g), which made it an ideal sorbent for sample pretreatment. The experimental conditions affecting extraction performance (adsorbent type, adsorbent amount, reaction time, pH, ionic concentration, and eluent) were optimized systematically. The extracted analytes were detected by HPLC-MS/MS. Under optimized conditions, the proposed method exhibited a wide linear range (0.5-100 μg/L) and low limits of detection (0.01-0.14 μg/L). The recoveries (75.40%-102.13%) satisfied the requirements for a precise detection method. The proposed method was successfully used for determining malathion, triazophos, quinalphos in lettuce, tomato and cucumber samples, thus indicating the potential of using 3DGA@COFs materials for pretreating vegetable samples.

[Synthesis and application progress of covalent organic polymers in sample preparation for food safety analysis]

Food safety is closely related to human health and life. Contaminated foods may result in illness or poisoning. For example, perfluorinated compounds can concentrate in the human body, or they can be transferred to the baby during breastfeeding, thus leading to serious health risks. Phthalate esters may cause damage to the liver, lungs, and kidneys. Therefore, food safety has become a hot topic at a global level. Poisonous and harmful substances in foods are derived from the environment, planting or breeding, food contacting materials, and food processing, or due to unsuitable storage conditions. Residues of pesticides and veterinary drugs, organic pollutants, additives, heavy metals, and biotoxins often hamper food safety, causing diseases or even death. The diversity of available food species, complexity of the sample matrix, and lack of information about the source of pollutants render the direct determination of food contaminants difficult. Pretreatment is vital for the accurate analysis of trace toxins in foods. Optimal pretreatment can not only improve the extract efficiency and determination sensitivity, but also prevent instrument contamination. Pretreatment techniques have played an important role in trace determination for complex matrices. Pretreatment methods can be classified as solvent-based and adsorption-based methods. Adsorption-based techniques such as solid-phase extraction, magnetic solid-phase extraction, and solid-phase microextraction are simple and efficient, and hence, are widely used. In these pretreatment techniques, adsorbents play a key role in the extraction effect. In the last few years, metal organic frameworks, metal oxide materials, carbon nanotubes, graphene, and magnetic nanoparticles, as well as a combination of these materials, have been used as adsorbents. These materials are porous and have a large surface area; they are used to enrich trace targets and eliminate interferents. Covalent organic polymers (COPs) are a class of organic porous materials constructed from organic monomers via covalent bonding. Given their excellent characteristics such as light density, good stability, high surface area, structural controllability, and ease of modification, COPs are potential adsorbents. COPs are often synthesized by solvent thermal methods. However, these methods are time-consuming and require toxic solvents and harsh reaction conditions. As alternatives, room-temperature methods, mechanical chemical methods, microwave-assisted methods, and UV-assisted methods have been developed. This has facilitated the synthesis of a wide range of COPs. In this article, the recent applications of COPs in sample pretreatment for food safety analysis are reviewed. COPs can be used in solid-phase extraction by simple packing into columns, polymerization, or chemical bonding in the capillary. Magnetic compounds have been prepared by one-pot synthesis, in situ growth, in situ reduction, or coprecipitation methods and used in magnetic solid-phase extraction. Coatings of solid-phase microextraction fibers are fabricated by physical methods, chemical bonding, sol-gel methods, or in situ growth. Toxic and harmful substances in foods and foodstuffs are efficiently extracted by exploiting the high adsorbent capacities and specificity of COPs. Future development prospects and challenges in sample pretreatment are also discussed herein. There is increased focus on the development of simple, efficient, and environment-friendly methods to synthesize COPs with specific functions; further, high-throughput, sensitive analytical methods may be established. In the future, more specific COPs will be prepared in a cost-effective manner for widespread use in sample pretreatment.

Magnetic boron nitride nanosheets as a novel magnetic solid-phase extraction adsorbent for the determination of plant growth regulators in tomatoes

A novel magnetic boron nitride nanosheets (Fe₃O₄@BNNSs) composite-based magnetic solid-phase extraction (MSPE) method was employed to analyse six plant growth regulators (PGRs) in tomatoes combined with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The novel Fe₃O₄@BNNSs composite was prepared via an in situ chemical coprecipitation process and characterized by scanning electron microscopy (SEM), Fourier transform infrared spectrometry (FT-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and vibrating sample magnetometry (VSM). Several factors that may affect the extraction efficiencies were optimized. Under the optimal factors, low limits of detection (0.002-0.010 ng g^-1), good linear ranges (0.05-10 ng g^-1) and satisfactory precisions (intra-day: 1.2%-3.9%; inter-day: 2.1%-6.9%) were achieved. The established approach was successfully employed to extract and determine PGRs in tomatoes, and the spiked recoveries were between 85.2 and 109.0%.

Preparation of magnetic mesoporous metal-phenolic coordination spheres for extraction of crystal violet and leuco-metabolites in fish

To address the undesirably low porosity of phenolic resin, a new material termed magnetic mesoporous metal-phenolic coordination spheres (Fe₃O₄@Co-TA) was synthesized by chelating tannic acid (TA) with metal ions. Fe₃O₄@Co-TA was characterized by transmission electron microscopy, scanning electron microscopy, hysteresis loop (B-H) analysis, Fourier-transform infrared spectroscopy, and N₂ adsorption-desorption. The results indicated that the new material comprises mesopores (2 nm and 3 nm) and exhibits a good magnetic response (44 emu/g). Combined with high-performance liquid chromatography (HPLC), a novel method for the detection of crystal violet (CV) and leucocrystal violet (LCV) by magnetic solid-phase extraction was established. Under the optimal extraction conditions, the linear ranges of CV and LCV detection were 0.2‒60 μg/L and 0.04‒40 μg/L, the detection limits were 0.04 μg/L and 0.008 μg/L, and the enrichment factors were 435 and 460, respectively. Fe₃O₄@Co-TA was reused ten times without significant reduction of the extraction ability. This method was successfully used for the detection of CV and LCV in fish samples, providing an effective technique for food safety monitoring and quality control.

Covalent Organic Framework Composites: Synthesis and Analytical Applications

In the recent years, composite materials containing covalent organic frameworks (COFs) have raised increasing interest for analytical applications. To date, various synthesis techniques have emerged that allow for the preparation of crystalline and porous COF composites with various materials. Herein, we summarize the most common methods used to gain access to crystalline COF composites with magnetic nanoparticles, other oxide materials, graphene and graphene oxide, and metal nanoparticles. Additionally, some examples of stainless steel, polymer, and metal-organic framework composites are presented. Thereafter, we discuss the use of these composites for chromatographic separation, environmental remediation, and sensing.

Nanoscale covalent organic frameworks as theranostic platforms for oncotherapy: synthesis, functionalization, and applications

Cancer nanomedicine is one of the most promising domains that has emerged in the continuing search for cancer diagnosis and treatment. The rapid development of nanomaterials and nanotechnology provide a vast array of materials for use in cancer nanomedicine. Among the various nanomaterials, covalent organic frameworks (COFs) are becoming an attractive class of upstarts owing to their high crystallinity, structural regularity, inherent porosity, extensive functionality, design flexibility, and good biocompatibility. In this comprehensive review, recent developments and key achievements of COFs are provided, including their structural design, synthesis methods, nanocrystallization, and functionalization strategies. Subsequently, a systematic overview of the potential oncotherapy applications achieved till date in the fast-growing field of COFs is provided with the aim to inspire further contributions and developments to this nascent but promising field. Finally, development opportunities, critical challenges, and some personal perspectives for COF-based cancer therapeutics are presented.

Effective enrichment and detection of trace polybrominated diphenyl ethers in water samples based on magnetic covalent organic framework nanospheres coupled with chromatography-mass spectrometry

Novel core shell structured magnetic covalent organic frameworks were synthesized at room temperature and first applied in water samples for the enrichment of trace polybrominated diphenyl ethers (PBDEs) through magnetic solid-phase extraction. The prepared materials were characterized through transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, vibrating sample magnetometer and X-ray photoelectron spectroscopy. During adsorption, the parameters affecting extraction and desorption efficiency were further optimized. Combined gas chromatography and mass spectrometry (GC/MS) revealed that high enrichment factors (275-292), low limits of detection (0.12-0.38 ng·L-1), wide linear ranges (0.5-1000 ng·L-1), and good reproducibility (intra-day 1.40%-4.31% and inter-day 5.14%-9.12%) were obtained under optimal conditions. The method successfully detected PBDEs in different water samples.

Covalent Organic Frameworks in Sample Preparation

Covalent organic frameworks (COFs) can be classified as emerging porous crystalline polymers with extremely high porosity and surface area size, and good thermal stability. These properties have awakened the interests of many areas, opening new horizons of research and applications. In the Analytical Chemistry field, COFs have found an important application in sample preparation approaches since their inherent properties clearly match, in a good number of cases, with the ideal characteristics of any extraction or clean-up sorbent. The review article is meant to provide a detailed overview of the different COFs that have been used up to now for sample preparation (i.e., solid-phase extraction in its most relevant operational modes-conventional, dispersive, magnetic/solid-phase microextraction and stir-bar sorptive extraction); the extraction devices/formats in which they have been applied; and their performances and suitability for this task.