Electroactive polypyrrole-molybdenum disulfide nanocomposite for ultrasensitive detection of berberine in rat plasma

A Ratiometric Fluorescence Detection Method for Berberine Using Triplex-Containing DNA-Templated Silver Nanoclusters

Berberine (BBR), as a natural isoquinoline alkaloid, has demonstrated various pharmacological activities, and is widely applied in the treatment of diseases. The quantitative analysis of BBR is important for pharmacological studies and clinical applications. In this work, utilizing the specific interaction between BBR and triplex DNA, a sensitive and selective fluorescent detecting method was established with DNA-templated silver nanoclusters (DNA-AgNCs). After binding with the triplex structure in the template of DNA-AgNCs, BBR quenched the fluorescence of DNA-AgNCs and formed BBR-triplex complex with yellow-green fluorescence. The ratiometric fluorescence signal showed a linear relationship with BBR concentration in a range from 10 nM to 1000 nM, with a detection limit of 10 nM. Our method exhibited excellent sensitivity and selectivity, and was further applied in BBR detection in real samples.

A CTAB-assisted PANI-MoS2 nanosheet flower morphology for the highly sensitive electrochemical detection of hydrazine

In this work, cetyl trimethylammonium bromide (CTAB)-assisted polyaniline-molybdenum disulfide (CPANI-MoS2) nanosheets with a flower morphology have been synthesized through in situ polymerization and a hydrothermal method. The composite was analyzed for structural modification through X-ray diffraction (XRD) to examine chemical changes and the presence of functional groups via Fourier transform infrared (FTIR) and Raman spectroscopy techniques. The surface morphology was identified by field-emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HR-TEM) techniques. The CPANI-MoS2 nanosheet glassy carbon electrode (GCE) offers a novel strategy for the electrochemical detection of carcinogenic hydrazine. The cyclic voltammetry (CV) curve demonstrated a quasi-reversible behaviour with a high-surface area. Furthermore, differential pulse voltammetry (DPV) analysis of hydrazine detection showed a wide linear range from 10 μM to 100 μM, a low limit of detection of 0.40 μM, and a high sensitivity of 7.23 μA μM cm-2. The determination of hydrazine in a water sample and the recovery percentage were found to be 100.31% and 103.73%, respectively. The CPANI-MoS2 nanosheet GCE significantly contributed to the high electroanalytical oxidation activity due to the CTAB surfactant modifying the flower-like nanosheet morphology, which enables the easy adsorption of hydrazine analyte species and exhibits a high current rate with a rapid detection response.

Polypyrrole-induced active-edge-S and high-valence-Mo reinforced composites with boosted electrochemical performance for the determination of 2,4,6-trichlorophenol in the aquatic environment

With the extensive application of halogenated aromatic compounds, including 2,4,6-Trichlorophenol (2,4,6-TCP), improper treatment or discharge contribute to persistently harmful effects on humans and the ecosystem, rendering the identification and monitoring of 2,4,6-TCP in the aquatic environment urgently required. In this study, a highly sensitive electrochemical platform was developed using active-edge-S and high-valence-Mo rich MoS₂/polypyrrole composites. MoS₂/PPy illustrates superior electrochemical performance and catalytic activity and has not been explored for detecting chlorinated phenols previously. The local environment of polypyrrole induces the richness of active edge S and a high oxidation state of Mo species in the composites, both of which endorse a sensitive anodic current response due to the favored oxidation of 2,4,6-TCP through nucleophilic substitution. Also, the higher complementarity between pyrrole and 2,4,6-TCP with respective electron-rich and electron-poor features through π-π stacking interactions enhances the specific detection capability of 2,4,6-TCP by the MoS₂/polypyrrole-modified electrode. The MoS₂/polypyrrole-modified electrode achieved a linear range of 0.1-260 μM with an ultralow limit of detection of 0.009 μM. Additionally, the structural stability boosted by the linkage of polypyrrole and MoS₂ results in good resistance and satisfactory recovery in real water samples. The compiled results demonstrate that the proposed MoS₂/polypyrrole composite opens up a new potential to advance a sensitive, selective, facile fabrication, and low-cost platform for the on-site determination of 2,4,6-TCP in aquatic systems. The sensing of 2,4,6-TCP is important to monitor its occurrence and transport, and can also serve to track the effectiveness and adjust subsequent remediation treatments applied to contaminated sites.

Disposable and cost-effective label-free electrochemical immunosensor for prolactin based on bismuth sulfide nanorods with polypyrrole

Prolactin (PRL) is produced by the pituitary gland and plays a vital role in the production of milk after a baby is born. PRL levels are normally elevated in pregnant and nursing women, and high levels of PRL in the human body cause hyperprolactinemia, infertility, galactorrhea, infrequent or irregular periods, amenorrhea, breast pain, and loss of libido. Accordingly, herein, a novel label-free immunosensor using a bismuth sulfide/polypyrrole (Bi2S3/PPy)-modified screen-printed electrode (SPE) for the fast and facile detection of the peptide hormone PRL. Bi2S3 nanorods were synthesized via a facile hydrothermal technique, and PPy was prepared by chemical polymerization method. Subsequently, the Bi2S3/PPy/ SPE was modified with 3-mercaptopropionic acid (MPA) and EDC/NHS. Owing to the cross-linking effect of EDC/NHS, antibody-PRL (anti-PRL) was firmly stabilized on the modified SPE surface. These layer-by-layer modifications enhanced the conducting properties, anti-PRL loading capacity, and sensitivity of the developed immunosensor. Under optimized conditions, the PRL immunosensor demonstrated a broad linear range of approximately 1-250 ng/mL, a low detection limit of approximately 0.130 ng/mL (3 × SD/b), good specificity, reproducibility, and stability. PRL was successfully evaluated in human and mouse serum samples, and the corresponding outcomes were compared with those of the electrochemical and ELISA methods.

Fabrication of eco-friendly chitosan functionalized few-layered WS2 nanocomposite implanted with ruthenium nanoparticles for in vitro antibacterial and anticancer activity: Synthesis, characterization, and pharmaceutical applications

The abundance of two-dimensional (2D) components has provided them with a broad material platform for building nano and atomic-level applications. So, 2D nanomaterials are unique because of their physicochemical properties. Over many years, graphene is a conventional 2D layered element that has significant attention in the scientific community. In recent years numerous new 2D nanomaterials other than graphene have been reported. The study of 2D nanomaterials is also in its infant stages, with the majority of research focusing on the explanation of special material properties, but very few articles are focusing on the biological applications of 2D nanomaterials. As a result, we focused on the transition metal dichalcogenides (TMDCs) such as MoS₂ and WS₂, which were emerging and exciting groups of elements with display great opportunities in several fields, such as cancer nanomedicine. Herein, we synthesized biologically active CS/WS₂/Ru composite by liquid exfoliation approach. The CS/WS₂/Ru composites exhibit significant antibacterial action towards (S. aureus, and E. coli) bacteria. Also, the composite suggests synergetic anticancer action against MCF-7 cancer cells. These reports are possible to explore the innovative aspects of biological outcomes in carcinological applications.

A cationic quantum dot-based ratiometric fluorescent probe to visually detect berberine hydrochloride in human blood serums

Berberine hydrochloride (BH) is an isoquinoline alkaloid normally used as drug to treat diseases. Compared with the traditional detection methods, the carbon quantum dots (CQDs) have better selectivity, high sensitivity, easy operation, and is inexpensive which could be widely utilized as fluorescent nanoprobes to detect various compounds quantificationally. And ratiometric fluorescent sensors conspicuously increase sensitivity and precision detection and improve quantification. In this work, we use water-soluble and fluorescent cationic carbon dots cetylpyridinium chloride monohydrate (CPC)-CQDs to connect with pinacyanol chloride (PC) and sodium tetraphenylborate (ST) as the ratiometric fluorescent probe to detect BH. The ratiometric fluorescent probe has high sensitivity towards alkaloids and metal ions, photochemical stability (60 min), and pH stability (from 6.0 to 8.0), with the detection range from 0 to 200 μM, and limit was as low as 57.35 nM. The accuracy of the method was verified by spiked recovery experiment in different human blood serums which were drawn from healthy adult volunteers to explore the practicability. The recoveries were in the range 94.34 to 105.48% with relative standard deviations (RSD) of 0.80 to 2.92%. In addition, we could observe that the fluorescence was gradually darkened, and the color turned yellow to realize the visual detection. It is expected that this work would open up a new strategy for detecting BH in the environment and human blood serums.

Determination of berberine in Rhizoma coptidis using a β-cyclodextrin-sensitized fluorescence method

In this work, a method for the determination of berberine in Rhizoma coptidis using β-cyclodextrin-sensitized fluorescence technology is established. Berberine is the main extract of Rhizoma coptidis, a medicinal material, which causes an envelope reaction with β-cyclodextrin to generate fluorescence sensitization. In the environment of its own aqueous extract, with 0.0065 mol L⁻¹ of β-cyclodextrin, a fluorescence excitation wavelength (λ_ex) of 345 nm and an emission wavelength (λ_em) of 540 nm were selected to avoid interference from other distractors. The fluorescent sensor for the detection of berberine exhibits a low limit of detection (3.59 × 10⁻⁹ mol L⁻¹) and a wide linear range from 2.7 × 10⁻⁷ mol L⁻¹ to 2.7 × 10⁻⁶ mol L⁻¹. Our sensor can be also used to detect berberine in real medicinal materials. The content of berberine in Rhizoma coptidis medicinal material was found to be 7.60% using this method with an average recovery rate of 99.5%. The result obtained by thin-layer chromatography with fluorescence detection was 7.61%, which is consistent with the result from the β-cyclodextrin sensitized fluorescence method. This method is simple and environmentally friendly with high sensitivity and good selectivity and gives reliable results, which is promising for practical application.

In this work, a method for the determination of berberine in Rhizoma coptidis using β-cyclodextrin-sensitized fluorescence technology is established.