Room-temperature synthesis of flower-shaped covalent organic frameworks for solid-phase extraction of quinolone antibiotics

Hydroxyl-containing triazine-based conjugated microporous polymers for solid phase extraction of fluoroquinolone antibiotics in the environment and food samples

Fluoroquinolones (FQs) are a category of broadly used antibiotics. Development of an effective and sensitive approach for determination of trace FQs in environmental and food samples is still challenging. Herein, the hydroxyl-containing triazine-based conjugated microporous polymers (CMPs-OH) was constructed and served as SPE absorbent for the efficient enrichment of FQs. Based on DFT simulations, the excellent enrichment capacity between CMPs-OH and FQs was contributed by hydrogen bonding and π-π interactions. In combination with high-performance liquid chromatography-tandem mass spectrometry, the proposed approach exhibited a wide linear range (0.2-400 ng L-1), low detection limits (0.05-0.15 ng L-1), and good intraday and interday precisions under optimal conditions. In addition, the established method was effectively utilized for the determination of FQs in fourteen samples with recoveries between 82.6 % and 109.2 %. This work provided a feasible sample pretreatment method for monitoring FQs in environmental and food matrices.

Fabrication of fluorinated triazine-based covalent organic frameworks for selective extraction of fluoroquinolone in milk

A novel fluorinated triazine-based covalent organic frameworks (F-CTFs) was designed and synthesized by using melamine and 2,3,5,6-tetrafluoroterephthalaldehydeas as organic ligands for selective pipette tip solid-phase extraction (PT-SPE) of amphiphilic fluoroquinolones (FQs). The competitive adsorption experiment and mechanism study were carried out and verified that this F-CTFs possesses favorable adsorption affinity for FQs. The abundant fluorine affinity sites endowed the F-CTFs high selectivity to FQs extraction through F-F interactions. The adsorption capacity of F-CTFs can reach up to 109.1 mg g-1 for enrofloxacin. The detailed characterization of the F-CTFs adsorbent involved the application of various techniques to examine its morphology and structure. Under optimized conditions, a method combining F-CTF-based PT-SPE with high-performance liquid chromatography (PT-SPE-HPLC) was established, which exhibited a broad linear range, excellent precision, and an impressively low limit of detection, and could be used for the determination of six FQs in milk, with LODs as low as 0.0010 μg mL-1. The recovery rates during extraction varied between 92.1% and 111.4%, exhibiting RSDs below 6.8% at different spiked concentrations.

Hydroxylated hierarchical flower-like COF for solid-phase extraction of adrenergic receptor agonists in milk

A new detection platform based on a hydroxylated covalent organic framework (COF) integrated with liquid chromatography-tandem mass spectrometry (LC-MS/MS) was constructed and used for detecting adrenergic receptor agonists (ARAs) residues in milk. The hydroxylated COF was prepared by polymerization of tris(4-aminophenyl)amine and 1,3,5-tris(4-formyl-3-hydroxyphenyl)benzene and applied to solid-phase extraction (SPE) of ARAs. This hydroxylated COF was featured with hierarchical flower-like morphology, easy preparation, and copious active adsorption sites. The adsorption model fittings and molecular simulation were applied to explore the potential adsorption mechanism. This detection platform was suitable for detecting four α2- and five β2-ARAs residues in milk. The linear ranges of the ARAs were from 0.25 to 50 µg·kg-1; the intra-day and the inter-day repeatability were in the range 2.9-7.9% and 2.0-10.1%, respectively. This work demonstrates this hydroxylated COF has great potential as SPE cartridge packing, and provides a new way to determine ARAs residues in milk.

Controllable synthesis of uniform flower-shaped covalent organic framework microspheres as absorbent for solid-phase extraction of trace 2,4-dichlorophenol

Controllable synthesis of micro-flower covalent organic frameworks (MFCOFs) with controllable size, monodisperse, spherical, and beautiful flower shape was realized by using 2,5-diformylfuran (DFF) and p-phenylenediamine (p-PDA) as building blocks at room temperature. High-quality MFCOFs (5 - 7 μm) were synthesized by controlling the kind of solvent, amounts of monomers, catalyst content, and reaction time. The synthesized MFCOFs possessed uniform mesopores deriving from the intrinsic pores of frameworks and wide-distributed pores belonging to the gap between the petals. The MFCOFs-packed solid-phase extraction (SPE) column shows adsorption capacity of about 8.85 mg g-1 for 2,4-dichlorophenol (2,4-DCP). The MFCOF-based SPE combined with the HPLC method was established for the determination of 2,4-DCP in environmental water. The linear range of this method is 20-1000 ng mL-1 (R2 > 0.9994), and limit of detection (S/N = 3) is 10.9 ng mL-1. Spiked recoveries were 94.3-98.5% with relative standard deviations lower than 2.3%.

A Europium Metal-Organic Framework and Its Polymer Composite Membrane as Switch-Off Fluorescence Sensors for Antibiotic Detection in Lake Water

The detection of antibiotic residues is of great significance in monitoring their overuse in healthcare, livestock and poultry farming, and agricultural production. Herein, EuCl3 and 4,4'-dicarboxyl-diphenoxyethene (H2DPOE) ionothermally reacted in 1-methyl-3-butylimidazolium chloride to give a europium metal-organic framework (Eu-DPOE). Eu-DPOE shows different fluorescence quenching rates for sensing eight antibiotics under different excitation wavelengths. Eu-DPOE displays a fast response, high selectivity, and sensitivity in antibiotic detection by fluorescence quenching. Eu-DPOE can sensitively detect TCs (tetracyclines), NOR (norfloxacin), NFT (furazolidone), ODZ (ornidazole), SDZ (sulfadiazine), and CHL (chloramphenicol) with limits of detection below 0.5 μmol/L. It provides a convenient and rapid tool for sensing antibiotics in aqueous solution. The detection mechanism is a competition absorption between DPOE2- and antibiotics with the supports from powder X-ray diffraction (PXRD), UV-vis spectra, and fluorescence lifetime. With a composite membrane of poly(vinylidene fluoride) (PVDF) matrix loading Eu-DPOE (Eu-DPOE@PVDF), Eu-DPOE@PVDF exhibits a visual fluorescence response to NOR under a 254 nm UV lamp and NFT and CTC under 365 nm. Eu-DPOE@PVDF is applied in the quantitative detection of CTC, NOR, and NFT in lake water with recovery rates ranging from 88.37 to 113.8%. Totally, fluorescence-quenched Eu-DPOE@PVDF exhibits a fast response, high selectivity, and sensitivity in sensing CTC, NOR, and NFT.

Green and Facile Preparation of Covalent Organic Frameworks Based on Reaction Medium for Advanced Applications

Covalent organic frameworks (COFs), as a new class of crystalline, well-ordered, and porous materials with intermittent constructions, are formed via organic structural parts connected through covalent bonds. These materials have been employed in several fields comprising pollutant adsorption and separation, catalysis, electrical conductivity, gas storage, etc. The preparation of COFs is mainly applied in tubes with high temperatures and degassing treatment. Furthermore, the reaction medium is involved in toxic organic solvents like toluene, dioxane, mesitylene, acetonitrile, and so on. Hence, discovering clean medium and green approaches has attracted wide attention. Recently, facile, less dangerous, and greener methods have been developed for COFs synthesis in diverse applications like performing the reaction at ambient temperature or employing aqueous solvents, ionic liquids, and a mixture of organic solvents/water. This review article summarizes the eco-friendly production approaches of COFs for diverse applications.

Method Validation and Measurement Uncertainty (MU) Evaluation on Enrofloxacin and Ciprofloxacin in the Aquatic Products

This study aimed to investigate a detection method of enrofloxacin and ciprofloxacin to be avail for strictly supervising the quality and safety of aquatic products. The results displayed that the optimal extraction conditions for enrofloxacin and ciprofloxacin were the following five aspects: 15 g dosages of Na2SO4 to dehydrate, 8‰ of acetonitrile and 50% hydrochloric acid to deproteinization, 2 mL dosages of n-hexane to degrease, 10 min of ultrasonic time, and 20 min of extraction (stand) time. Meanwhile, it was also obtained for the optimal detection performance indexes of the recovery, precision, and accuracy from the tests of shrimp, grass carp, and tilapia. In particular, the expanded uncertainties were 2.8601 and 0.8613, and the factors of both the calibration curves (Urel(C)) and the analysis of the experiment (Urel(E)) were the two MU main contributors for enrofloxacin and ciprofloxacin together with the results above 40%. Consequently, the developed novel method was suited for the determination of the enrofloxacin and ciprofloxacin residues in aquatic products and would contribute to reinforce in supervision and inspection of the quality and safety of aquatic products.

Multivariate covalent organic frameworks guided carboxyl functionalized magnetic adsorbent for enrichment of fluoroquinolones in milk prior to high performance liquid chromatographic analysis

Herein, we prepared a carboxyl functionalized magnetic covalent organic framework (Fe3O4@iCOF-COOH) by combining multivariate synthetic strategy with post-synthetic modification. It was used as an adsorbent for magnetic solid phase extraction (MSPE) of six fluoroquinolones (FQs), and showed good absorption performance at neutral pH. Carboxyl groups are found to be crucial for the adsorption of fluoroquinolones. The adsorption mechanism was primarily attributed to strong hydrogen bonding, π-π interaction as well as potential hydrophobic effect. The optimal extraction conditions are sample pH at 6.0, adsorbent dosage of 3 mg, eluent of 1.0 mL methanol solution containing 7.5% ammonia, and extraction/desorption time of 30 min. Under the optimized conditions, the Fe3O4@iCOF-COOH was used as an adsorbent for MSPE of FQs in milk, an analytical method was established by combining with high-performance liquid chromatography-ultraviolet detection (HPLC-UV). The limits of detection (LODs) and limit of quantification (LOQs) were 1.24-4.58 ng⋅mL-1 and 4.12-15.3 ng⋅mL-1, respectively. The recoveries of target FQs in spiked milk were 68.4-105%. This work provides a new way to prepare covalent organic framework based adsorbents for solid phase extraction, and can be readily extended to other type of adsorbents.

Slice-layer COFs-aerogel: a regenerative dispersive solid-phase extraction adsorbent for determination of ultra-trace quinolone antibiotics

A novel type of three-dimensional network structure, covalent organic frameworks (COFs) aerogel, was fabricated and applied to dispersive solid-phase extraction (dSPE) of quinolone antibiotics (QAs). Density functional theory (DFT) was applied to investigate the possible interaction mechanism and results confirmed that the strong adsorption affinity is attributed to the intralayer hydrogen bonds and π-π interaction. Furthermore, a sensitive analytical method based on COFs-aerogel for determining quinolone antibiotics residues in water and honey samples was developed and HPLC-MS/MS was used for sample detection and quantification. Under the optimal conditions, COFs-aerogel exhibited a wide linearity (0.1-500 ng∙L-1), low limits of detection (0.02-0.06 ng∙L-1), and good precision (RSD ˂ 10%) for selected QAs. A preliminary practical application of the developed method was proved by the efficient detection of quinolone antibiotics in water and food samples with good recoveries (68.2-104% and 64.0-100% for water and honey samples, respectively). Combining the experimental data with theoretical calculation, results illustrated that COFs-aerogel holds a great potential to capture contaminants and address environmental and food safety issues.

Recent perspective of antibiotics remediation: A review of the principles, mechanisms, and chemistry controlling remediation from aqueous media

Antibiotic pollution is an ever-growing concern that affects the growth of plants and the well-being of animals and humans. Research on antibiotics remediation from aqueous media has grown over the years and previous reviews have highlighted recent advances in antibiotics remediation technologies, perspectives on antibiotics ecotoxicity, and the development of antibiotic-resistant genes. Nevertheless, the relationship between antibiotics solution chemistry, remediation technology, and the interactions between antibiotics and adsorbents at the molecular level is still elusive. Thus, this review summarizes recent literature on antibiotics remediation from aqueous media and the adsorption perspective. The review discusses the principles, mechanisms, and solution chemistry of antibiotics and how they affect remediation and the type of adsorbents used for antibiotic adsorption processes. The literature analysis revealed that: (i) Although antibiotics extraction and detection techniques have evolved from single-substrate-oriented to multi-substrates-oriented detection technologies, antibiotics pollution remains a great danger to the environment due to its trace level; (ii) Some of the most effective antibiotic remediation technologies are still at the laboratory scale. Thus, upscaling these technologies to field level will require funding, which brings in more constraints and doubts patterning to whether the technology will achieve the same performance as in the laboratory; and (iii) Adsorption technologies remain the most affordable for antibiotic remediation. However, the recent trends show more focus on developing high-end adsorbents which are expensive and sometimes less efficient compared to existing adsorbents. Thus, more research needs to focus on developing cheaper and less complex adsorbents from readily available raw materials. This review will be beneficial to stakeholders, researchers, and public health professionals for the efficient management of antibiotics for a refined decision.

Synthesis of a magnetic covalent organic framework for extraction and separation of ultraviolet filters in beverage samples

In this study, a novel magnetic covalent organic framework (Fe₃O₄@TAPB-BTT) was successfully synthesized under mild conditions. The prepared magnetic COF exhibited large surface area (876.3 m² g^-1), porous feature as well as sizeable π-conjugated network structure. Due to the above advantages, Fe₃O₄@TAPB-BTT showed good adsorptive performance for ultraviolet (UV) filters with adsorption capacities ranging from 80.8 to 120.1 mg g^-1. Then the adsorbent was applied to magnetic solid phase extraction (MSPE) of UV filters in beverage samples, followed by UHPLC-MS/MS analysis. The established method showed good accuracy, precision, and reproducibility with satisfactory recoveries (76.9-95.6 %), low limits of detection (0.001-0.15 µg/L), and low relative standard deviations (<9.8 %). Besides, the adsorbent can be reutilized at least ten times, demonstrating satisfactory reusability. This work provided an effective method for the analysis and determination of UV filters in drinks.

Rapid microwave synthesis of MOF microrods: Dispersive SPE coupled with UHPLC-MS/MS to determine fluoroquinolones in honey

A novel sorbent Cu-S metal-organic framework (MOF) microrods was prepared for dispersive solid-phase extraction via microwave synthesis and used to determine 12 fluoroquinolones (FQs) in honey samples employing ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). The best extraction efficiency was achieved by optimizing sample pH, sorbent quantity, eluent type/volume, and extraction and elution time. The proposed MOF exhibits advantages such as rapid synthesis time (20 min) and outstanding adsorption ability toward zwitterionic FQs. These advantages can be attributed to multiple interactions, including hydrogen bonding, π-π interaction, and hydrophobic interaction. The limits of detection of analytes were 0.005-0.045 ng g^-1. Acceptable recoveries (79.3%-95.6%) were obtained under the optimal conditions. Precision (relative standard deviation, RSD) was <9.2%. These results demonstrate the utility of our sample preparation method and the high capacity of Cu-S MOF microrods for rapid and selective extraction of FQs from honey samples.

Facile synthesis of triazine-based porous organic polymer for the extraction and determination of nitrofuran metabolites residues from meat samples with ultra-high performance liquid chromatography-quadrupole time of flight mass spectrometry

In this work, a novel triazine-based porous organic polymers, TAPT-BPDD, was firstly synthesized by a facile method at room temperature. After characterized by FT-IR, FE-SEM, XRPD, TGA, and nitrogen-sorption experiments, TAPT-BPDD was applied as solid-phase extraction (SPE) adsorbent for the extraction of four trace nitrofuran metabolites (NFMs) from meat samples. The key parameters including the adsorbent dosage, sample pH, type and volume of eluents, type of washing solvents were evaluated in the extraction process. Combined with ultra-high performance liquid chromatography-quadrupole time of flight mass spectrometry (UHPLC-QTOF-MS/MS) analysis, good linear relationship (1-50 µg·kg^-1, R²>0.9925) and low limits of detection (LODs, 0.05-0.56 µg·kg^-1) were obtained under the optimal conditions. When spiked at different level, the recoveries were in the range of 72.7-111.6%. The adsorption isothermal model and extraction selectivity of TAPT-BPDD were also studied in detail. The results showed that TAPT-BPDD was a kind of promising SPE adsorbent for the enrichment of organics in food samples.

The Ultratrace Determination of Fluoroquinolones in River Water Samples by an Online Solid-Phase Extraction Method Using a Molecularly Imprinted Polymer as a Selective Sorbent

Fluoroquinolones (FQs) are broad-spectrum antibiotics widely used to treat animal and human infections. The use of FQs in these activities has increased the presence of antibiotics in wastewater and food, triggering antimicrobial resistance, which has severe consequences for human health. The detection of antibiotics residues in water and food samples has attracted much attention. Herein, we report the development of a highly sensitive online solid-phase extraction methodology based on a selective molecularly imprinted polymer (MIP) and fluorescent detection (HPLC-FLD) for the determination of FQs in water at low ng L−1 level concentration. Under the optimal conditions, good linearity was obtained ranging from 0.7 to 666 ng L−1 for 7 FQs, achieving limits of detection (LOD) in the low ng L−1 level and excellent precision. Recoveries ranged between 54 and 118% (RSD < 17%) for all the FQs tested. The method was applied to determining FQs in river water. These results demonstrated that the developed method is highly sensitive and selective.

[Determination of four fungicides in water by magnetic solid phase extraction-ultrahigh performance liquid chromatography-tandem mass spectrometry using covalent organic framework material]

Fungicides can lead to soil and plant diseases after long-term enrichment in the environment; they can also penetrate deeper into the soil and groundwater by rainwater or irrigation, threatening the water environment and human health. Therefore, it is crucial to develop a simple, rapid, efficient, and sensitive analytical method for the detection of fungicides in the water environment. Sample pretreatment is important for the extraction and enrichment of pollutants from environmental water. Magnetic solid phase extraction (MSPE) is a new sample pretreatment method, which uses magnetic materials as adsorbents dispersed in solution, and rapid separation can be achieved by the aid of external magnets. Because of its advantages of short analytical time, less organic solvent consumption, and easy separation of adsorbents, MSPE has attracted much attention. The key to MSPE is the preparation of highly selective magnetic adsorbents. Covalent organic frameworks have the advantages of large surface area, good chemical and thermal stability, tunable porous structure, low density, and easy functionalization, all of which are ideal for adsorbing fungicides. The concentration of fungicides in environmental water is low. Ultrahigh performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) has high sensitivity and high selectivity, which is suitable for the analysis of fungicides. In this work, a magnetic covalent organic framework Fe₃O₄@TpBD was prepared by an in situ method, as the MSPE sorbent material to enrich of benzimidazole fungicides (thiabendazole, carbendazim, fuberidazole) and organic sulfur fungicide (isoprothiolane) in environmental water. An extraction method based on π-π conjugation, hydrogen bonding, and electrostatic interaction between Fe₃O₄@TpBD and the fungicides, in combination with UHPLC-MS/MS, was developed for the determination of four trace fungicides in water. Transmission electron microscopy (TEM), X-ray diffractometry (XRD), and Fourier transform-infrared spectroscopy (FT-IR) were performed to confirm the successful synthesis of Fe₃O₄@TpBD and to characterize this material. A series of experiments were carried out to decide the optimal extraction conditions, i. e., the magnetic ratio and dosage of Fe₃O₄@TpBD, pH of the water sample, adsorption time, type and volume of the eluent, elution time, and salinity. Gradient elution was carried out with methanol-water as the mobile phase. The target analytes were separated on an ACQUITY UPLC BEH C18 column (100 mm×2.1 mm, 1.7 μm), and multiple reaction monitoring (MRM) was conducted in the positive electrospray ionization mode. The ion source temperature and ion source voltage were set to 500 ℃ and 5 kV, respectively. The analytical method was established under the optimized extraction conditions. The four fungicides showed good linearity in the range of 3-1200 ng/L, with linear correlation coefficients greater than 0.998. The limits of detection (LODs) and limits of quantification (LOQs) of this developed method were 0.06-0.28 ng/L and 0.20-0.92 ng/L, respectively. Recovery tests were performed at three spiked levels of 15, 150, and 600 ng/L, with relative standard deviations of 2.8% to 10.0% (intra-day) and 4.4% to 15.7% (inter-day). The accuracy of the established analytical method was investigated by using it to test real water samples, and satisfactory recoveries for the four analytes were achieved within 77.1% to 119.1%. Trace amounts of carbendazim were detected in the reservoir water at 27.5 ng/L. The method has good sensitivity, accuracy, and precision, and the operation process is convenient.

Determination of quinolone antibiotics in environmental water using automatic solid-phase extraction and isotope dilution ultra-performance liquid chromatography tandem mass spectrometry

The widespread use of quinolones in humans and animals has become a major threat to public health. In this study, a simple, rapid, sensitive, and high throughput method based on automatic solid-phase extraction and isotope dilution ultra-performance liquid chromatography tandem mass spectrometry was described for the determination of trace quinolones in environmental water. The proposed automated solid-phase extraction method was initially optimized, and the optimum experimental conditions found were 1 L water sample with 0.5 g/L Na₂EDTA (pH 3) extracted and enriched by CNW Poly-Sery HLB cartridge at a flow rate of 50 mL/min and eluted by 8 mL of methanol. The linearity of the method ranged from 0.05 to 100 μg/L for 15 quinolones, with correlation coefficients ranging from 0.9993 to 0.9999. The limits of detection were in the low ng/L level, ranging from 0.005 to 0.051 ng/L. Finally, the optimized method was applied for determining trace levels of 15 quinolones in Wahaha pure water, tap water, river water, and seawater samples with good recoveries of 93 %-119 % and satisfactory relative standard deviations of 0.1 %-13.9 %. Fourteen quinolones were detected, and ofloxacin was the predominant congener in river water and seawater.

Covalent Organic Framework/Polyacrylonitrile Electrospun Nanofiber for Dispersive Solid-Phase Extraction of Trace Quinolones in Food Samples

The extraction of quinolone antibiotics (QAs) is crucial for the environment and human health. In this work, polyacrylonitrile (PAN)/covalent organic framework TpPa–1 nanofiber was prepared by an electrospinning technique and used as an adsorbent for dispersive solid-phase extraction (dSPE) of five QAs in the honey and pork. The morphology and structure of the adsorbent were characterized, and the extraction and desorption conditions for the targeted analytes were optimized. Under the optimal conditions, a sensitive method was developed by using PAN/TpPa–1 nanofiber as an adsorbent coupled with high-performance liquid chromatography (HPLC) for five QAs detection. It offered good linearity in the ranges of 0.5–200 ng·mL⁻¹ for pefloxacin, enrofloxacin, and orbifloxacin, and of 1–200 ng·mL⁻¹ for norfloxacin and sarafloxacin with correlation coefficients above 0.9946. The limits of detection (S/N = 3) of five QAs ranged from 0.03 to 0.133 ng·mL⁻¹. The intra-day and inter-day relative standard deviations of the five QAs with the spiked concentration of 50 ng·mL⁻¹ were 2.8–4.0 and 3.0–8.8, respectively. The recoveries of five QAs in the honey and pork samples were 81.6–119.7%, which proved that the proposed method has great potential for the efficient extraction and determination of QAs in complex samples.

Recent Advances in the Application of Covalent Organic Frameworks in Extraction: A Review

Covalent organic frameworks (COFs) are a class of emerging materials that are synthesized based on the covalent bonds between different building blocks. COFs possess unique attributes in terms of high porosity, tunable structure, ordered channels, easy modification, large surface area, and great physical and chemical stability. Due to these features, COFs have been extensively applied as adsorbents in various extraction modes. Enhanced extraction performance could be reached with modified COFs, where COFs are presented as composites with other materials including nanomaterials, carbon and its derivatives, silica, metal-organic frameworks, molecularly imprinted polymers, etc. This review article describes the recent advances, developments, and applications of COF-based materials being utilized as adsorbents in the extraction methods. The COFs, their properties, their synthesis approaches as well as their composite structures are reviewed. Most importantly, suggested mechanisms for the extraction of analyte(s) by COF-based materials are also discussed. Finally, the current challenges and future prospects of COF-based materials in extraction methods are summarized and considered in order to provide more insights into this field.

Effective extraction of fluoroquinolones from water using facile modified plant fibers

In this study, ecofriendly and economic carboxy-terminated plant fibers (PFs) were used as adsorbents for the effective in-syringe solid phase extraction (IS-SPE) of fluoroquinolone (FQ) residues from water. Based on the thermal esterification and etherification reaction of cellulose hydroxy with citric acid (CA) and sodium chloroacetate in aqueous solutions, carboxy groups grafted onto cotton, cattail, and corncob fibers were fabricated. Compared with carboxy-terminated corncob and cotton, CA-modified cattail with more carboxy groups showed excellent adsorption capacity for FQs. The modified cattail fibers were reproducible and reusable with relative standard deviations of 3.2%–4.2% within 10 cycles of adsorption-desorption. A good extraction efficiency of 71.3%–80.9% was achieved after optimizing the extraction condition. Based on carboxylated cattail, IS-SPE coupled with ultra-performance liquid chromatography with a photodiode array detector was conducted to analyze FQs in environmental water samples. High sensitivity with limit of detections of 0.08–0.25 μg/L and good accuracy with recoveries of 83.8%–111.7% were obtained. Overall, the simple and environment-friendly modified waste PFs have potential applications in the effective extraction and detection of FQs in natural waters.

•

Plant fibers were functionalized by green methods.

•

The bio-adsorbents were applied for the extraction of fluoroquinolones.

•

The higher carboxy content in fibers improved extraction performance.

•

Carboxylated cattail was efficient in the adsorption of fluoroquinolones in environmental waters.

Fabrication of environmentally-friendly composited sponges for efficient removal of fluoroquinolones antibiotics from water

In this study, two environmentally-friendly macroscopically formal (PVF) composited sponges (PL and PLS) functionalized with lignin and lignosulfonate, respectively, were fabricated by a one-step mechanical foaming method. PLS, obtained with the fed mass ratio of 0.3:1 lignosulfonate to PVF in the preparation process, possessed a large specific surface area of approximately 22.396 m²/g, a three-dimensional skeleton structure with a skeletal density of 3.236 g/cm³, and 0.338 mmol/g of acidic oxygen-containing groups. Thus, it showed a high adsorption capacity of 0.16-0.24 mmol/g in removing seven antibiotics, of the popular fluoroquinolones (FQs) family from water. The contributions of hydrogen bonding, electrostatic attraction (EA) and π-π electron donor-acceptor interaction to the adsorption of FQs onto the PL and PLS sponges were analyzed systematically by investigating the pH dependence of the adsorption capacity, and the changes in adsorption of two sub structural analogs of FQs as molecular probes, and by performing theoretical calculations. The EA between the acidic oxygen-containing groups on the sponges and the amino groups of FQs played a dominant role in adsorption in near neutral conditions, leading to a superior adsorption performance for PLS. Overall, the composited sponges have the advantages of simple production, environmental-friendliness, convenient recycle, and low cost, which renders them potentially viable in treating real wastewater containing FQs.

Magnetic covalent-organic frameworks for the simultaneous extraction of eleven emerging aromatic disinfection byproducts in water samples coupled with UHPLC-MS/MS determination

A simple method based on magnetic solid-phase extraction (MSPE) was developed for the simultaneous extraction of eleven emerging aromatic disinfection byproducts (DBPs) in water samples coupled with ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) determination. A magnetic covalent-organic framework (COF) material, namely, Fe₃O₄ @TpBD, was facilely synthesized and fully characterized, followed by an MSPE process. Several important MSPE parameters, such as the magnetic ratio, Fe₃O₄ @TpBD amount and sample pH, were systematically investigated. Under optimal conditions, the limits of detection and quantification of this COF-MSPE-UHPLC-MS/MS method were as low as 0.07-1.81 ng/L and 0.24-5.99 ng/L, respectively. Good precision was obtained with relative standard deviations (RSDs) of 1.3-10.9% (intraday) and 4.3-15.9% (interday). Furthermore, the validated method was proven applicable to real water samples; for example, the recoveries were 86.8-115.1% for the secondary effluent, and several DBPs in swimming pool water were detected. Notably, the MSPE process required only 7 min, ensuring that the DBPs were relatively stable during the whole analysis process and that Fe₃O₄ @TpBD demonstrated excellent reusability. The COF-based MSPE method with simplicity, rapidity and efficiency provided an ideal sample pretreatment alternative to determine trace DBPs in complex matrices.

Miniaturized green sample preparation approaches for pharmaceutical analysis

The development of green sample preparation procedures is an extremely important research field in which more and more applications are constantly being proposed in different areas, including pharmaceutical analysis. This review article is aimed at providing a general overview of the development of miniaturized green analytical sample preparation procedures in the pharmaceutical analysis field, with special focus on the works published between January 2017 and July 2021. Particular attention has been paid to the application of environmentally friendly solvents and sorbents as well as nanomaterials or high extraction capacity sorbents in which the solvent volumes and reagents amounts are drastically reduced, with their subsequent advantages from the sustainability point of view.

Covalent organic frameworks-based smart materials for mitigation of pharmaceutical pollutants from aqueous solution

Covalent organic frameworks (COFs) are an emergent group of crystalline porous materials that have gained incredible interest in recent years. With foreseeable controllable functionalities and structural configurations, the constructions and catalytic properties of these organic polymeric materials can be controlled to fabricate targeted materials. The specified monomer linkers and pre-designed architecture of COFs facilitate the post-synthetic modifications for introducing novel functions and useful properties. By virtue of inherent porosity, robust framework, well-ordered geometry, functionality, higher stability, and amenability to functionalization, COFs and COFs-based composites are regarded as prospective nanomaterials for environmental clean-up and remediation. This report spotlights the state-of-the-art advances and progress in COFs-based materials to efficiently mitigate pharmaceutical-based environmental pollutants from aqueous solutions. Synthesis approaches, structure, functionalization, and sustainability aspects of COFs are discussed. Moreover, the adsorptive and photocatalytic potential of COFs and their derived nanocomposites for removal and degradation of pharmaceuticals are thoroughly vetted. In addition to deciphering adsorption mechanism/isotherms, the stability, regeneratability and reproducibility are also delineated. Lastly, the outcomes are summed up, and new directions are proposed to widen the promise of COF-based smart materials in diverse fields.

共价有机框架分子印迹聚合物复合材料的制备及其用于牛奶中痕量诺氟沙星的选择性富集

诺氟沙星(NFX)作为一种常见的喹诺酮类兽药,被广泛应用于畜牧业中,但其会残留在动物体内,进而对人体健康造成危害,为此有许多国家和组织均对NFX残留量进行了严格限制。为实现对复杂体系中痕量NFX残留的准确与可靠分析,该文制备了一种以共价有机框架(COFs)为载体的分子印迹聚合物(MIPs)。首先,在室温条件下,以金属三氟酸盐为催化剂,对苯二甲醛和3,3'-二氨基联苯为原料快速合成了“席夫碱”型共价有机框架(DP-COF)。然后将NFX、甲基丙烯酸、乙二醇二甲基丙烯酸酯与DP-COF混合,利用偶氮二异丁腈引发聚合反应,即可得到DP-COF@MIPs。整个制备过程条件温和,耗时仅5 h。采用场发射扫描电镜、傅里叶红外光谱、X射线衍射仪、BET比表面积测试仪等对其进行了表征。结果证实成功制备出了DP-COF@MIPs,该材料表面粗糙,拥有介孔范围的孔径(17.79 nm)。通过吸附实验、重复使用性实验对材料性能进行评估,结果表明该材料表观吸附容量高达41.57 mg/g,对NFX具有良好的特异性和选择性识别能力,且重复使用率令人满意。结合HPLC-UV-Vis,实现对牛奶样品中痕量NFX的检测。在3个加标水平下(0.03、0.1、0.3 mg/L),平均回收率为88.8%~92.9%,相对标准偏差小于1.7%。结果表明,该方法可以实现在复杂基质中对兽药残留高选择性、高灵敏度及准确性的检测。

Recent advances in porous organic frameworks for sample pretreatment of pesticide and veterinary drug residues: a review

Rapid and accurate detection of pesticide and veterinary drug residues is a continuing challenge because of the complex matrix effects. Thus, appropriate sample pretreatment is a crucial step for the effective extraction of the analytes and removal of the interferences. Recently, the development of nanomaterial adsorbents has greatly promoted the innovation of food sample pretreatment approaches. Porous organic frameworks (POFs), including polymers of intrinsic microporosity, covalent organic frameworks, hyper crosslinked polymers, conjugated microporous polymers, and porous aromatic frameworks, have been widely utilized due to their tailorable skeletons and pores as well as fascinating features. This review summarizes the recent advances for POFs to be utilized in adsorption and sample preparation of pesticide and veterinary drug residues. In addition, future prospects and challenges are discussed, hoping to offer a reference for further study on POFs in sample pretreatment.

Technological Advancements for the Detection of Antibiotics in Food Products

Antibiotics, nowadays, are not only used for the treatment of human diseases but also used in animal and poultry farming to increase production. Overuse of antibiotics leads to their circulation in the food chain due to unmanaged discharge. These circulating antibiotics and their residues are a major cause of antimicrobial resistance (AMR), so comprehensive and multifaceted measures aligning with the One Health approach are crucial to curb the emergence and dissemination of antibiotic resistance through the food chain. Different chromatographic techniques and capillary electrophoresis (CE) are being widely used for the separation and detection of antibiotics and their residues from food samples. However, the matrix present in food samples interferes with the proper detection of the antibiotics, which are present in trace concentrations. This review is focused on the scientific literature published in the last decade devoted to the detection of antibiotics in food products. Various extraction methods are employed for the enrichment of antibiotics from a wide variety of food samples; however, solid-phase extraction (SPE) techniques are often used for the extraction of antibiotics from food products and biological samples. In addition, this review has scrutinized how changing instrumental composition, organization, and working parameters in the chromatography and CE can greatly impact the identification and quantification of antibiotic residues. This review also summarized recent advancements in other detection methods such as immunological assays, surface-enhanced Raman spectroscopy (SERS)-based assays, and biosensors which have emerged as rapid, sensitive, and selective tools for accurate detection and quantification of traces of antibiotics.

Hotpots and trends of covalent organic frameworks (COFs) in the environmental and energy field: Bibliometric analysis

Covalent organic frameworks (COFs) have attracted extensive attention due to their low density, adjustable structure, functionalization, and good stability. This paper systematically and comprehensively describes to qualitatively and quantitatively the progress, trends, and hotspots of COFs in the environmental and energy fields from the perspective of bibliometrics. Herein, based on the Web of Science database, a total of 2589 articles from 2005 to October 6, 2020, were collected. Thereafter, co-occurrence, co-citation analysis, and cluster analysis were conducted using CiteSpace and VOSviewer software. The results indicated that COFs research shows the characteristics of rapid growth. The active countries were mainly USA, Germany, Japan, China, and India. More than half of the top 20 active institutions were from China. The research hotspots in this field were systematically elaborated, including synthesis, adsorption, catalysis, membrane, sensor, and energy storage. Research has shown that various COFs are reasonably designed, synthesized, and used in different applications. For example, when COFs are used for photocatalysis, groups containing photocatalytic active sites are integrated into COFs to improve photocatalytic activity. Finally, some challenges were proposed, that are beneficial to the rapid and balanced development of the COFs field. For instance, the preparation methods still need to be further improved for mass production and there is an imbalance in environmental applications such as fewer sensor and membrane applications. We believe that this study provides a comprehensive and systematic overview of the environmental and energy applications of COFs for future investigations.

Sheathed in-situ room-temperature growth covalent organic framework solid-phase microextraction fiber for detecting ultratrace polybrominated diphenyl ethers from environmental samples

The extraction performance of solid-phase microextraction (SPME) fiber is significantly influenced by coating materials and fabricating process. It is urgently needed for fabricating robust SPME fiber with facile preparation methods. Herein, a novel polyimide (PI) @ covalent organic framework (COF) synthesized by 1,3,5-Tris (4-aminophenyl) benzene (TPB) and 2,5-dimethoxyterephthalaldehyde (DMTP) fiber, named PI@TPB-DMTP fiber, was successfully fabricated with facile method at room temperature. Firstly, a COF crystals TPB-DMTP was in situ grown on stainless steel fiber, where the COF crystals was synthesized by the Schiff-base reaction between TPB and DMTP. Subsequently, the COF coating was covered with an ultrathin layer of PI through a simple dip-coating method to improve the fiber stability. By coupled PI@TPB-DMTP SPME fiber with gas chromatography-negative chemical ion-mass spectrometry (GC-NCI-MS), a sensitive analytical method was established for the determination of ultratrace polybrominated diphenyl ethers (PBDEs) in water sample. To achieve the best efficiency and sensitivity for the analysis of PBDEs, six potential influencing factors in extraction step and desorption step were optimized. Under optimized conditions, the established method showed high enhancement factors of 1470-3555, wide linear range of 0.05-100 ng L^-1, low detection limits of 0.0083-0.0190 ng L^-1, good repeatability for intra-day in the range of 3.71%-7.62% and inter-day in the range of 5.12%-8.81%, good reproducibility in the range of 6.83%-9.21%. The satisfactory recovery was ranged from 79.2% to 117.3% in determining real water samples. The excellent experimental performance was mainly attributed to the large specific surface area of TPB-DMTP, as well as the high permeability of porous PI film. The results demonstrated that the COF-based fiber showed great potential for analysis of PBDEs in complex environmental samples.

Determination of quinolones in environmental water and fish by magnetic metal organic frameworks based magnetic solid-phase extraction followed by high-performance liquid chromatography-tandem mass spectrometry

The widespread use of quinolones has become an increasing global public health threat. In this study, IRMOF-3 coated SiO₂/Fe₃O₄ were prepared via a facile room-temperature method. The prepared IRMOF-3 coated SiO₂/Fe₃O₄ was used as a sorbent for magnetic solid phase extraction, and then combined with high-performance liquid chromatography-tandem mass spectrometry for the determination of 10 quinolines. The extraction conditions of magnetic solid phase extraction were studied in detail, and the optimal conditions were established. Under the optimal experimental conditions, the limits of quantification of 10 quinolones were in the range of 0.005-0.01 μg L^-1, the relative standard deviations were 6.58-10.6% (n=7), the enrichment factors were 21.0-23.8 for water samples. The limits of quantification of 10 quinolones were in the range of 0.10-0.20 μg kg^-1, the relative standard deviations were 5.95-14.5% (n=7), the enrichment factors were 1.08-1.24 for fish samples. The proposed method was applied for the determination of 10 quinolones in river water, aquacultural water and a fish sample, and enrofloxacin and ciprofloxacin were found in the fish sample.