Magneto-controlled aptasensor for simultaneous detection of ochratoxin A and fumonisin B1 using inductively coupled plasma mass spectrometry with multiple metal nanoparticles as element labels

Preparation of dual recognition adsorbents based on molecularly imprinted polymers and aptamer for highly sensitive recognition and enrichment of ochratoxin A

In light of the significant risks that mycotoxins posed to public health and environmental safety, this research developed an adsorbent MIPs/Apt/AuNPs@ZIF-67 (MA-AZ) utilizing a dual-recognition approach combining molecularly imprinted polymers (MIPs) and aptamer (Apt). This innovative method enabled the effective and highly selective recognition and enrichment of ochratoxin A (OTA). ZIF-67 was utilized as a carrier with a substantial specific surface area, and gold nanoparticles (AuNPs) were loaded on its surface to fix the thiol-modified Apt on the surface of the carrier. Then, an initiator was used to initiate a polymerization reaction, and the generated MIPs coated Apt/AuNPs@ZIF-67, thereby synthesizing the MA-AZ with a "synergistic recognition" effect. The Apt significantly increased the number of recognition sites within the imprinted cavities, and MIPs played roles in identifying targets, fixing and protecting Apt. The combination of the both produced the effect of "1+1>2". The study on the adsorption performance of MA-AZ found that the adsorption capacity of MA-AZ could reach 65.1 mg/g, and the imprinted factor was 5.48. In addition, MA-AZ exhibited excellent stability, specificity, reusability and recovery rate. Thus, this study offers valuable insights for the recognition and enrichment of hazardous substances, and helps to promote the rapid development of safety detection.

Ultrasensitive detection of the H5N1 nucleic acid fragment by ICP-MS using DNA dendrimer-carried silver nanoparticle labeling

The importance of avian influenza virus (AIV) detection in clinical diagnosis and prognosis has been deeply recognized. In this study, the ultrasensitive detection of AIV subtype H5N1 was achieved by ICP-MS combined with DNA dendrimer-carried silver nanoparticle (AgNP) labeling. First, a magnetic control system was constructed by anchoring double-strand DNAs (dsDNAs) which contained a complementary sequence of H5N1 and two locked triggers on the surface of magnetic beads (MBs). When H5N1 was present, the two triggers were released and initiated dendrimer hybridization chain reactions which led to the generation of DNA dendrimer-carried AgNPs on the surface of the MBs. Finally, the AgNPs were collected via magnetic separation, digested by nitric acid, and tested using ICP-MS. The signal intensities of 107Ag were positively correlated with the concentrations of H5N1. Notably, the DNA dendrimer assembly contributed to significant signal amplification and good sensitivity with the limit of detection as low as 2.0 × 10-11 mol L-1. Moreover, the method displayed favorable selectivity against mismatched H5N1 and good recoveries in human serum samples. It is a promising analytical tool for the H5N1 virus and other subtypes of AIV, and has potential value in clinical diagnosis and prognosis of infectious diseases.

Light-Driven Electrochemical Biosensing with DNA Origami-Assisted Hybrid Nanoantenna for Fumonisin B1 Monitoring

The electrochemical detection of biosensors is largely governed by the changes in physical properties of redox probes, which are susceptible to electrode substrate effects, inhibiting sensor sensitivity. In this work, a light-driven electrochemical biosensor based on a hybrid nanoantenna was developed for the sensitive detection of fumonisin B1 (FB1). The hybrid nanoantenna sensing interface was constructed by coupling CdSe quantum dots (QDs)-DNA nanowire and graphdiyne oxide composites loaded with methylene blue and gold nanorods (GDYO-MB-Au NRs) using a tetrahedral DNA nanostructure, which acted as a light-driven unit and an amplification unit, respectively. The hybrid nanoantenna with light-driven properties facilitated the alteration in the chemical properties of MB at the sensing interface; that is, MB was degraded under light illumination. The stripping of the CdSe QDs-DNA nanowire triggered by the binding of FB1 could degrade the light-driven capability, thereby improving the electrochemical signal through depressing MB degradation. Taking advantage of the photodegradation of MB by the hybrid nanoantenna, the developed biosensor reduced the background signal and increased the detection sensitivity. The developed biosensor exhibited a linear detection range from 0.5 fg mL-1 to 10 pg mL-1 and a detection limit down to 0.45 fg mL-1. This strategy shows great promise for the fabrication of highly sensitive electrochemical biosensors.

A comprehensive review of mycotoxins: Toxicology, detection, and effective mitigation approaches

Mycotoxins, harmful compounds produced by fungal pathogens, pose a severe threat to food safety and consumer health. Some commonly produced mycotoxins such as aflatoxins, ochratoxin A, fumonisins, trichothecenes, zearalenone, and patulin have serious health implications in humans and animals. Mycotoxin contamination is particularly concerning in regions heavily reliant on staple foods like grains, cereals, and nuts. Preventing mycotoxin contamination is crucial for a sustainable food supply. Chromatographic methods like thin layer chromatography (TLC), gas chromatography (GC), high-performance liquid chromatography (HPLC), and liquid chromatography coupled with a mass spectrometer (LC/MS), are commonly used to detect mycotoxins; however, there is a need for on-site, rapid, and cost-effective detection methods. Currently, enzyme-linked immunosorbent assays (ELISA), lateral flow assays (LFAs), and biosensors are becoming popular analytical tools for rapid detection. Meanwhile, preventing mycotoxin contamination is crucial for food safety and a sustainable food supply. Physical, chemical, and biological approaches have been used to inhibit fungal growth and mycotoxin production. However, new strains resistant to conventional methods have led to the exploration of novel strategies like cold atmospheric plasma (CAP) technology, polyphenols and flavonoids, magnetic materials and nanoparticles, and natural essential oils (NEOs). This paper reviews recent scientific research on mycotoxin toxicity, explores advancements in detecting mycotoxins in various foods, and evaluates the effectiveness of innovative mitigation strategies for controlling and detoxifying mycotoxins.

ICP-MS and fluorescence dual-mode detection of ZIKV-RNA based on quantum dot labeling with hybridization chain reaction

The detection of Zika virus (ZIKV) is of great significance to human life and health. Herein, we presented an ICP-MS and fluorescent dual-mode sensor for quantitative analysis of Zika virus RNA fragments (ZIKV-RNA), which employed quantum dots (QDs) as signal tags and combined with hybridization chain reaction (HCR). The dual-mode sensor realized cross-checking of the analysis results and improved the assay accuracy. Firstly, the single-stranded DNA (ssDNA) was anchored on the surface of magnetic beads (MBs). Afterward, HCR was conducted with probe DNA-CdSe quantum dots conjugates (pDNA-QDs) and link DNA (lDNA), producing the MBs-ssDNA-[pDNA-QDs-lDNA]n conjugates. In the presence of target ZIKV-RNA, a strand displacement reaction occurred, leading to the dissociation of the [pDNA-QDs-lDNA]n labels from the conjugates into the solution. Finally, the signal intensity was detected using ICP-MS and fluorescence analysis, with achieved limits of detection of 131 pM and 152 pM, respectively. The inter-assay RSD values of fluorescence and ICP-MS were 3.94 % and 4.26 % at 10 nM level, respectively, showing that the method had good precision. This method showed high selectivity and was applied to the analysis of biological fluids. There was no significant difference between the results of ICP-MS modes and fluorescence mode. This method offers a new strategy for sensitivity analysis of ZIKV-RNA and exhibits promise in clinical applications for diagnosis.

Iodinated organic molecule as tag for inductively coupled Plasma-mass spectrometry aptamer assays

Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) aptamer-based assays using metallic nanostructures or chelates as exogenous tags have gained growing attention in the last decade. We describe here a proof-of-concept study based on the exploitation of a simple organic molecule as a tag, i.e.l-thyroxine carrying four iodine atoms detectable by ICP-MS. A solid-phase assay involving the structure-switching format was deployed for the detection of the small molecule l-tyrosinamide as model target. The overall design involved (i) a reporter agent consisting of a DNA aptamer incorporating a single l-thyroxine label at its end and (ii) a capture agent, which is a partially complementary strand, immobilized on a microplate. Limit of detection in the nanomolar range was reported. The present labeling approach was further developed for the detection of a model protein (α-thrombin), using a sandwich mode, and proved effective in a biological matrix. We believe that the l-thyroxine tagging method could become a simple and robust alternative to commonly used labeling methods for ICP-MS aptamer-based assays.

Magnetic nanoparticle-based immunosensors and aptasensors for mycotoxin detection in foodstuffs: An update

Mycotoxin contamination of food crops is a global challenge due to their unpredictable occurrence and severe adverse health effects on humans. Therefore, it is of great importance to develop effective tools to prevent the accumulation of mycotoxins through the food chain. The use of magnetic nanoparticle (MNP)-assisted biosensors for detecting mycotoxin in complex foodstuffs has garnered great interest due to the significantly enhanced sensitivity and accuracy. Within such a context, this review includes the fundamentals and recent advances (2020-2023) in the area of mycotoxin monitoring in food matrices using MNP-based aptasensors and immunosensors. In this review, we start by providing a comprehensive introduction to the design of immunosensors (natural antibody or nanobody, random or site-oriented immobilization) and aptasensors (techniques for aptamer selection, characterization, and truncation). Meanwhile, special attention is paid to the multifunctionalities of MNPs (recoverable adsorbent, versatile carrier, and signal indicator) in preparing mycotoxin-specific biosensors. Further, the contribution of MNPs to the multiplexing determination of various mycotoxins is summarized. Finally, challenges and future perspectives for the practical applications of MNP-assisted biosensors are also discussed. The progress and updates of MNP-based biosensors shown in this review are expected to offer readers valuable insights about the design of MNP-based tools for the effective detection of mycotoxins in practical applications.

Ultrasensitive determination of β-conglutin food allergen by means an aptamer assay based on inductively coupled plasma mass spectrometry detection

The overall objective of this work is the evaluation of different competitive aptamer assays based on inductively coupled plasma mass spectrometry (ICP-MS) detection for the determination of β-conglutin (food protein allergen from lupin) in flour samples. To this end, two competitive aptamer assay schemes were developed using either thiolated aptamers chemisorbed onto gold nanoparticles (AuNPs) or biotinylated aptamers linked to streptavidin-AuNPs. The influence of ICP-MS detection mode (i.e., conventional vs single particle) on assay performance was explored. In the case of the thiolated aptamer, the limit of detection (LoD) obtained using the single particle mode was improved 2-fold as compared to the LoD provided by the conventional mode. With regards to the biotinylated aptamer, the use of the conventional mode provided a 5-fold improvement of LoD as compared to that obtained for the single particle one. Using the optimized conditions, the best LoD of 2 pM was obtained with the biotinylated aptamer operating with conventional ICP-MS detection. When compared to previous reports using the same aptamer in a competitive assay, the developed method significantly improved the LoD by at least an order of magnitude. Different flour samples containing lupin were successfully analyzed according to European Conformity guidelines for the analysis of food contaminants.

Dual-ratiometric electrochemical aptasensor based on carbon nanohorns/anthraquinone-2-carboxylic acid/Au nanoparticles for simultaneous detection of malathion and omethoate

Organophosphorus pesticides (OPs) are one of the most frequently used pesticides in agriculture, and their residues in environment have caused serious human health and environmental concerns. In this work, we reported a dual-ratiometric electrochemical aptasensor based on carbon nanohorns/anthraquinone-2-carboxylic acid/Au nanoparticles (CNHs/AQ/AuNPs) for simultaneous detection of malathion (MAL) and omethoate (OMT). Here, CNHs/AQ/AuNPs composites were synthesized by a simple room temperature method, and used as a substrate to generate a reference signal (I_AQ) and enlarge response signals. Hairpin DNA was then immobilized, offering independent and specific binding sites to further adsorb MB-labelled MAL aptamer (MB-Apt1) and Fc-labelled OMT aptamer (Fc-Apt2). Upon the addition of MAL or OMT, the formation of aptamer-target complex caused the release of MB-Apt1 or Fc-Apt2 from the electrode, resulting in a decrease in I_MB or I_Fc, while I_AQ kept unchanged. Based on this principle, the ratiometric signals of I_MB/I_AQ and I_Fc/I_AQ were used to simultaneously detect MAL and OMT, offering a linear range of 3 pg mL^-1 to 3 ng mL^-1 for MAL and 10 pg mL^-1 to 10 ng mL^-1 for OMT, and no significant cross-reactivity existed. By taking advantage of the excellent conductivity and large specific area of CNHs/AQ/AuNPs and the stable two-dimensional structure of hairpin DNA, the aptasensor exhibited high sensitivity, selectivity and reliability. Our work has offered a novel way for simultaneous detection of multiple OPs.

Aptamer affinity-based microextraction in-line coupled to capillary electrophoresis mass spectrometry using a porous layer/nanoparticle -modified open tubular column

An aptamer affinity based microextraction column is developed to be directly in-line coupled to capillary electrophoresis-mass spectrometry (CE-MS) for analyzing mycotoxins in food samples. Single-stranded DNA aptamers for selective recognition of aflatoxin B1 (AFB1) and ochratoxin A (OTA) targets are co-immobilized via covalent bonds on the surface of the inlet end of a capillary, which is pre-modified with three-dimensional porous layer and gold nanoparticles to enhance the specific surface area and loading capacity. The outlet of the capillary is designed as a porous tip to serve as the spray source for injection to the mass spectrometry. All the necessary processes for pretreatment and analysis of a sample are accomplished in one injection, including aptamer affinity-based microextraction, CE separation and MS detection of analytes. AFB1 and OTA are simultaneously determined in a wide linear range with sample consumption of only 1 μL and the limit-of-detection as low as 1 pg/mL. The microextraction column exhibits excellent repeatability and stability, which can be used over 45 runs within a month with CE separation efficiency and only MS intensity slightly decreased. Mycotoxins in three kinds of cereal based infant foods are accurately analyzed using the proposed method. The study provides a robust and universal approach that would have potential applications in a variety of analytical fields based on selective molecular recognition coupling to CE-MS analysis.

ssDNA-C3N4 conjugates-based nanozyme sensor array for discriminating mycotoxins

A nanozyme sensor array based on the ssDNA-distensible C3N4 nanosheet sensor elements for discriminating multiple mycotoxins commonly existing in contaminated cereals has been explored. The sensor array exploited (a) three DNA nonspecific sequences (A40, T40, C40) absorbed on the C3N4 nanosheets as sensor elements catalyzing the oxidation of TMB; (b) the presence of five mycotoxins affected the catalytic activity of three nanozymes with various degrees. The parameter (A₀-A) was employed as the signal output to obtain the response patterns for different mycotoxins with the same concentration where A₀ and A were the absorption peak values at 650 nm of oxTMB in the absence and presence of target mycotoxins, respectively. After the raw data was subjected to principal component analysis, 3D canonical score plots were obtained. The sensor array was capable of separating five mycotoxins from each other with 100% accuracy even if the concentration of the mycotoxins was as low as 1 nM. Moreover, the array performed well in discriminating the mycotoxin mixtures with different ratios. Importantly, the practicality of this sensor array was demonstrated by discriminating the five mycotoxins spiking in corn-free samples in 3D canonical score plots, validating that the sensor array can act as a flexible detection tool for food safety. A nanozyme sensor array was developed based on the ssDNA-distensible C3N4 NSs sensor elements for discriminating muitiple mycotoxins.

Recent advances in simultaneous detection strategies for multi-mycotoxins in foods

Mycotoxin contamination has become a challenge in the field of food safety testing, given the increasing emphasis on food safety in recent years. Mycotoxins are widely distributed, in heavily polluted areas. Food contamination with these toxins is difficult to prevent and control. Mycotoxins, as are small-molecule toxic metabolites produced by several species belonging to the genera Aspergillus, Fusarium, and Penicillium growing in food. They are considered teratogenic, carcinogenic, and mutagenic to humans and animals. Food systems are often simultaneously contaminated with multiple mycotoxins. Due to the additive or synergistic toxicological effects caused by the co-existence of multiple mycotoxins, their individual detection requires reliable, accurate, and high-throughput techniques. Currently available, methods for the detection of multiple mycotoxins are mainly based on chromatography, spectroscopy (colorimetry, fluorescence, and surface-enhanced Raman scattering), and electrochemistry. This review provides a comprehensive overview of advances in the multiple detection methods of mycotoxins during the recent 5 years. The principles and features of these techniques are described. The practical applications and challenges associated with assays for multiple detection methods of mycotoxins are summarized. The potential for future development and application is discussed in an effort, to provide standards of references for further research.

Surface Plasmon Resonance (SPR) biosensor for detection of mycotoxins: A review

Mycotoxin is one of the most important natural pollutants, which poses a global threat to food safety. However, the pollution of mold in food production is inevitable. The detection technology of mycotoxins in food production is an important means to prevent the damage of mycotoxins, so rapid detection and screening to avoid pollution diffusion is essential. The focus of this review is to update the literature on the detection of mycotoxins by surface plasmon resonance (SPR) technology, rather than just traditional chromatographic methods. As a relatively novel and simple analytical method, SPR has been proved to be fast, sensitive and label-free, and has been widely used in real-time qualitative and quantitative analysis of various pollutants. This paper aims to give a broad overview of the sensors for detection and analysis of several common mycotoxins.

Establishment of an Improved ELONA Method for Detecting Fumonisin B1 Based on Aptamers and Hemin-CDs Conjugates

Fumonisin B₁ (FB₁) is a strong mycotoxin that is ubiquitous in agricultural products. The establishment of rapid detection methods is an important means to prevent and control FB₁ contamination. In this study, an improved enzyme-linked oligonucleotide assay (ELONA) method was designed and tested to detect the contents of FB₁ in maize (corn) samples. F10 modified with biotin was bound to an enzyme label plate that was coated with streptavidin (SA) in advance, and carbon dots (CDs) were used to catalyze the color of tetramethylbenzidine (TMB). The complementary chain of F10 was modified with an amino group and coupled with CDs to obtain conjugates. The sample and conjugates were then added to the enzyme plate coated with F10 (an FB₁ aptamer). Upon completion of the color reaction, the absorbance was measured at 450 nm. The LOD of this method was 4.30 ng/mL and the LOQ was 13.03 ng/mL. We observed a linear relationship in the FB₁ concentration range of 0-100 ng/mL. The standard curve was y = -0.001482 × x + 0.3463, R² = 0.9918, and the experimental results could be directly measured visually. The recovery of the maize sample was 97.5-99.23% and 94.54-99.25%, and the total detection time was 1 h.

Recent Progress in Rapid Determination of Mycotoxins Based on Emerging Biorecognition Molecules: A Review

Mycotoxins are secondary metabolites produced by fungal species, which pose significant risk to humans and livestock. The mycotoxins which are produced from Aspergillus, Penicillium, and Fusarium are considered most important and therefore regulated in food- and feedstuffs. Analyses are predominantly performed by official laboratory methods in centralized labs by expert technicians. There is an urgent demand for new low-cost, easy-to-use, and portable analytical devices for rapid on-site determination. Most significant advances were realized in the field bioanalytical techniques based on molecular recognition. This review aims to discuss recent progress in the generation of native biomolecules and new bioinspired materials towards mycotoxins for the development of reliable bioreceptor-based analytical methods. After brief presentation of basic knowledge regarding characteristics of most important mycotoxins, the generation, benefits, and limitations of present and emerging biorecognition molecules, such as polyclonal (pAb), monoclonal (mAb), recombinant antibodies (rAb), aptamers, short peptides, and molecularly imprinted polymers (MIPs), are discussed. Hereinafter, the use of binders in different areas of application, including sample preparation, microplate- and tube-based assays, lateral flow devices, and biosensors, is highlighted. Special focus, on a global scale, is placed on commercial availability of single receptor molecules, test-kits, and biosensor platforms using multiplexed bead-based suspension assays and planar biochip arrays. Future outlook is given with special emphasis on new challenges, such as increasing use of rAb based on synthetic and naïve antibody libraries to renounce animal immunization, multiple-analyte test-kits and high-throughput multiplexing, and determination of masked mycotoxins, including stereoisomeric degradation products.

Occurrence and dietary exposure of heavy metals in marketed vegetables and fruits of Shandong Province, China

The contamination of heavy metals in vegetables and fruits is a serious threat to food safety and human health. The present study was designed to investigate the occurrence and dietary exposure of lead (Pb), arsenic (As), cadmium (Cd), and mercury (Hg) in vegetables and fruits in Shandong Province, China. Results demonstrated that the mean level of total heavy metals was 30.25 µg/kg. The most frequently found heavy metal was Cd (69.2%) with a mean value of 11.54 µg/kg. The mean exposure values of Pb, As, Cd, and Hg in vegetables were 0.052, 0.045, 0.038, and 2.40 × 10-3 µg/kg bw/day, respectively. Moreover, the calculated hazard quotient (HQ) values of mean levels for these four heavy metals were all less than 1, indicating the health risk of heavy metal exposure caused by vegetable consumption was low. This study has displayed baseline information on heavy metal contamination in vegetables and fruits, which can provide useful data support for the formulation of relevant standards and government management.

Aptamer-based detection of fumonisin B1: A critical review

Mycotoxin contamination is a current issue affecting several crops and processed products worldwide. Among the diverse mycotoxin group, fumonisin B1 (FB1) has become a relevant compound because of its adverse effects in the food chain. Conventional analytical methods previously proposed to quantify FB1 comprise LC-MS, HPLC-FLD and ELISA, while novel approaches integrate different sensing platforms and fluorescently labelled agents in combination with antibodies. Nevertheless, such methods could be expensive, time-consuming and require experience. Aptamers (ssDNA) are promising alternatives to overcome some of the drawbacks of conventional analytical methods, their high affinity through specific aptamer-target binding has been exploited in various designs attaining favorable limits of detection (LOD). So far, two aptamers specific to FB1 have been reported, and their modified and shortened sequences have been explored for a successful target quantification. In this critical review spanning the last eight years, we have conducted a systematic comparison based on principal component analysis of the aptamer-based techniques for FB1, compared with chromatographic, immunological and other analytical methods. We have also conducted an in-silico prediction of the folded structure of both aptamers under their reported conditions. The potential of aptasensors for the future development of highly sensitive FB1 testing methods is emphasized.