Iodide/metal-organic frameworks (MOF) -mediated signal amplification strategy for the colorimetric detection of H2O2, Cr2O72- and H2S

Amino-Functionalized NDI-Based MOFs as Unusual "Turn On" and "Turn Off" Fluorescent Sensors for Phenolic Pollutants with Double Solvent Channel Response and Iodine Adsorbents

Regulating mixed ligands to change the functional properties of metal-organic frameworks (MOFs) has been an important topic; especially, the structural changes have significant implications for the transformation of sensing response in different solvent channels. Herein, two [Cd (DPNDI) (NH2-BDC)0.5(NO3)]·2.25DMF (1) and [Cd(DPNDI)(NH2-AIPA)]·0.5DMF (2) (DPNDI = N,N-di(4-pyridyl)-1,4,5,8-naphthalenetetracarboxydiimide, NH2-BDC = 2-amino terephthalic acid, NH2-AIPA = 5-aminoisophthalic acid) were synthesized by the solvothermal method. Structural analysis shows that complex 1 has a two-dimensional planar network structure and complex 2 exhibits a three-dimensional network structure, endowing its potential as an efficient fluorescence sensor for phenolic compound detection under different solvent environments. Both complexes showed high fluorescence quenching sensitivity to phenolics in a water medium. Conversely, complex 1 showed a fluorescence enhancement response to phenolic pollutants in an ethanol system with significantly low detection limits and recyclability. The detection limits were 0.58 μM for TNP, 1.3 μM for DNP, and 2.43 μM for PCP. In addition, the uncoordinated amino groups in the complexes promote them to exhibit excellent iodine adsorption performance. Especially, complex 2 can serve as an adsorbent for iodine in cyclohexane solution with better adsorption efficiency than that of complex 1, and its adsorption capacity can reach 505 mg/g. The mixed ligands regulation strategy of NDI-based MOFs will open up an effective avenue for the conversion of fluorescence signals in dual-solvent channels and play simultaneously important roles in multiple applications.

A simple fluorescence detection of acetylcholinesterase with peroxidase-like catalysis from iodide

Acetylcholinesterase (AChE) is an important enzyme in the central and peripheral nervous system that regulates the balance of the neurotransmitter acetylcholine. In this work, a simple, selective and sensitive fluorescence assay was developed toward AChE activity. A conventional AChE substrate acetylthiocholine iodide (ATCI) was applied. Instead directly rendering a signaling, it was found that free iodide ions was released during the enzymatic hydrolysis of ATCI. These ions further catalyzed the oxidation of non-emissive o-phenylenediamine (OPD) into a fluorescent product. This gave a response differed from frequently-adopted sulfhydryl- -based signals and thus minimized related interferences. All materials included in this process were directly available and no additional syntheses were required. Due to the extra iodide-based catalysis included, this scheme was capable of providing a sensitive response toward AChE in the range of 0.01-8 U/L, with a limit of detection at 0.006 U/L. This method was further extended onto chlorpyrifos as an exemplary AChE inhibitor, with a detection down to 3 pM.

High performance boron doped peroxidase-like nanozyme Cu/B-NC for detection of epinephrine and catalase

Herein, a novel peroxidase-like (POD-like) nanozyme Cu/B-NC was synthesized. The Cu and B co-doped nanozyme Cu/B-NC has competitive POD-like activity but negligible oxidase-like (OXD-like) activity, which is proved to partly benefit from the doping of boron atom. The catalytic activity of Cu/B-NC is high with great affinity for TMB and H2O2 and high reaction velocity. Cu/B-NC was utilized to catalyze the condensation of phenolic substance epinephrine (EP) and 4-aminoantipyrine (4-AAP) to form colored quinone imine in the presence of H2O2. UV-vis absorbance of quinone imine at 492 nm was used for EP determination. Catalase (CAT) could decompose H2O2, so CAT could also be quantified through absorbance variation. The linear ranges of colorimetric detection for EP and CAT were 2-100 μM and 1-30 U mL-1, respectively. The limits of detection (LODs) for EP and CAT were 0.97 μM and 0.57 U mL-1, respectively. The practicability of this sensing platform was further validated by successful application in actual samples.

Metal Site and Size-Controlled BTC-Based MOF as Cysteine Oxidase Mimic for Self-Cascade Detection of Cysteine and Hg2

Nanozyme-mediated strategy for sensing has been widely applied nowadays, in which the construction of a nanozyme cascade platform is an effective and challenging method to simulate the complexity and multifunctionality of natural systems. Herein, a simple and convenient self-cascade sensing platform was developed for the fluorescent detection of cysteine and Hg2+ by a BTC-based MOF through screening the metal sites and crystal sizes. By the introduction of polyvinylpyrrolidone, the as-prepared Cu-BTC possessed a metal center of Cu2+ and smaller size, which exhibited both cysteine oxidase- and peroxidase-like activities. The dual enzymic characters of Cu-BTC made a self-cascade reaction occur during which cysteine was first oxidized to cystine and generated H2O2 in the presence of O2, then H2O2 was decomposed into ·OH, and finally the ·OH triggered the turn-on fluorescence of Cu-BTC. Based on the self-cascade reactions and high affinity of Hg2+ and -SH within cysteine, a fluorescent method was developed to detect cysteine and Hg2+ with a range of 0-160/0-15 μM and a limit of detection of 0.04/0.09 μM, respectively. This work reveals the important role of the Cu2+ center for mimicking cysteine oxidase and gives a feasible strategy for constructing simple self-cascade reactions.

Advantages of Bimetallic Organic Frameworks in the Adsorption, Catalysis and Detection for Water Contaminants

The binary metal organic framework (MOF) is composed of two heterometallic ions bonded to an organic ligand. Compared with monometallic MOFs, bimetallic MOFs have greatly improved in terms of structure, porosity, active site, adsorption, selectivity, and stability, which has attracted wide attention. At present, many effective strategies have been designed for the synthesis of bimetallic MOF-based nanomaterials with specific morphology, structure, and function. The results show that bimetallic MOF-based nanocomposites could achieve multiple synergistic effects, which will greatly improve their research in the fields of adsorption, catalysis, energy storage, sensing, and so on. In this review, the main preparation methods of bimetallic MOFs-based materials are summarized, with emphasis on their applications in adsorption, catalysis, and detection of target pollutants in water environments, and perspectives on the future development of bimetallic MOFs-based nanomaterials in the field of water are presented.

Wavelength-shift-based visual fluorescence sensing of aspartic acids using Eu/Gd-MOF through pH triggering

With the increasing demand for on-site detection, the current approach of building dual-emission or multi-emission luminescence sensors based on metal-organic frameworks (MOFs) which possess the capacity of self-reference for numerous non-analyte factors falls short of meeting sensing requirements. Therefore, we have designed a novel strategy for constructing wavelength shift-based luminescence sensor named Eu/Gd(TCPP), which exhibits dual-emitting from metal ions Eu³⁺ and flexible rotating aggregation-induced emission (AIE) ligands H₄TCPP (2,3,5,6-tetrakis(4-carboxyphenyl)pyrazine). This sensor was prepared by a simple, green and fast plasma synthesis method. It's worth noting that the fluorescence emission of Eu/Gd(TCPP) shows a specific wavelength shift from ligand peak, and a visual color change from red to blue within a pH range of 4 to 3. Moreover, various characterization data verified that the luminescence switching mechanism of Eu/Gd(TCPP) was attributed to the H⁺-induced collapse of the Eu/Gd(TCPP) crystal structure, followed by untwisting of free ligands that lose rigid MOFs confinement. This hindered the antenna effect from H₄TCPP to Ln³⁺ ions and restricted the rotation emission of ligand, resulting in the red-shifting of the ligand emission and corresponding luminescence switching. By tactfully utilizing the short-range pH response property of Eu/Gd(TCPP), highly sensitive and selective on-site visual detection of acidic aspartic acid can be achieved.

Rapidly and ultra-sensitive colorimetric detection of H2O2 and glucose based on ferrous-metal organic framework with enhanced peroxidase-mimicking activity

In this article, a novel metal-organic framework, namely MIL-101(Fe^II), was firstly synthesized via a facile method. In the presence of H₂O₂, MIL-101(Fe^II) possesses excellent peroxidase-like activity toward the classical chromogenic substrate, N,N-Diethyl-p-phenylenediamine sulfate salt (DPD). The substitution of Fe²⁺ enhances the construction of Fe(II)-oxo nodes and accelerates electrons transfer between DPD and H₂O₂, thereby improving the peroxidase-mimicking catalytic activity of MIL-101(Fe^II) nanoenzyme. Additionally, DPD molecules could be adsorbed readily onto the surface of the nanoparticles due to the π-π interaction. The study of Michaelis constant indicates that the MIL-101(Fe^II) exhibits a higher affinity towards DPD (0.16 mM) in contrast to horseradish peroxidase (0.78 mM). In view of the impressive catalytic performance of MIL-101(Fe^II), two reliable monitoring platforms for the rapid detection of H₂O₂ and glucose were established with extremely low detection limits of 18.04 nM and 0.87 μM in the ranges of 40-5000 nM and 1.2-300 μM, respectively. The study of the catalytic mechanism indicates that DPD oxidation is attributed to the hydroxyl radical (·OH) produced from the decomposition of H₂O₂ catalyzed by MIL-101(Fe^II). Furthermore, the developed sensor indicates high selectivity and stability and can be effectively appropriate for the detection of H₂O₂ and glucose in real samples. This work not only provides a novel nanozyme with superior catalytic performance for biological analysis, but also broadens the application field of MIL-101(Fe^II) material.

Surface state dominated and carbon core coordinated red-emitting carbon dots for the detection of Cr2O72- and cell imaging

Cr(VI) as a toxic heavy metal ion can easily enter into the body through drinking or eating and cause liver and kidney diseases as well as cancer. Considering its high biological toxicity and adverse effects on human body, it is desirable to develop a probe to monitor its level in the environment. Herein, a high-efficiency fluorescent nanoprobe based on red emissive carbon dots (R-CDs) was established through a convenient solvothermal strategy. The as-prepared CDs with excitation-independency had the fixed emission wavelength at 627 nm when the excitation wavelength was 560 nm. Further study manifested that the new surface state formed by nitrogen and sulfur doping and the increased conjugated system established through dehydration and carbonization were the main reasons for the fluorescence redshift. In this system, these R-CDs as a fluorescent probe exhibited high specificity and sensitivity to Cr₂O₇^2- with the linear range of 4-40 μΜ and the limit of detection could reach 80.00 nM. The quenching of these CDs by Cr₂O₇^2- was efficiently induced through a static quenching process. Meanwhile, the obtained CDs could enter into HeLa cells through endocytosis and exhibit bright red fluorescence in cells under a confocal laser scanning microscope. Thus, this work provided a promising probe not only for detecting Cr(VI) in natural environment but also for imaging in cells.

Recent Progress in Metal-Organic Framework Based Fluorescent Sensors for Hazardous Materials Detection

Population growth and industrial development have exacerbated environmental pollution of both land and aquatic environments with toxic and harmful materials. Luminescence-based chemical sensors crafted for specific hazardous substances operate on host-guest interactions, leading to the detection of target molecules down to the nanomolar range. Particularly, the luminescence-based sensors constructed on the basis of metal-organic frameworks (MOFs) are of increasing interest, as they can not only compensate for the shortcomings of traditional detection techniques, but also can provide more sensitive detection for analytes. Recent years have seen MOFs-based fluorescent sensors show outstanding advantages in the field of hazardous substance identification and detection. Here, we critically discuss the application of MOFs for the detection of a broad scope of hazardous substances, including hazardous gases, heavy metal ions, radioactive ions, antibiotics, pesticides, nitro-explosives, and some harmful solvents as well as luminous and sensing mechanisms of MOF-based fluorescent sensors. The outlook and several crucial issues of this area are also discussed, with the expectation that it may help arouse widespread attention on exploring fluorescent MOFs (LMOFs) in potential sensing applications.

Yb3+-Doped Two-Dimensional Upconverting Tb-MOF Nanosheets with Luminescence Sensing Properties

In this article, we synthesized a Yb³⁺-doped two-dimensional (2-D) upconverting Tb metal-organic framework (Tb-MOF) (hereinafter referred to as Tb-UCMOF) by a one-step solvothermal method. The synthesized Tb-UCMOF is composed of stacks of 2-D nanosheets with an average width distributed between 250 and 300 nm, and these nanosheets can be exfoliated by a simple liquid ultrasound method. The structural characteristics of this flaky particle accumulation are confirmed by the type IV adsorption-desorption isotherm with a H₃-type adsorption hysteresis loop, and the Brunauer-Emmett-Teller surface of Tb-UCMOF is 143.9257 m²·g^-1. Tb-UCMOF has characteristic emissions of Tb³⁺ which are located at 490, 545, 585, and 621 nm under 980 nm excitation. The upconverting luminescence mechanism is attributed to that Yb³⁺ absorbs multiple photons and transfers the energy to Tb³⁺, causing its 4f electrons to jump to the excited state, and then the upconverting emissions are obtained when electrons return to the ground state. Since the Tb-UCMOF nanosheets have high dispersibility and an obvious upconverting luminescent signal, we explored their luminescence sensing properties. The luminescence intensity is found to gradually decrease with the addition of Cu²⁺, the linear range of Cu²⁺ sensing is 0-1.4 μM, and the detection limit is 0.16 μM. This rapid, highly selective, and sensitive Cu²⁺ sensing indicates that 2-D upconverting MOF nanosheets have great application prospects in luminescence sensing and also promote the research of 2-D upconverting MOFs with specific recognition for the application of biological and environmental luminescent sensors.

A Highly Stable Eu−MOF Multifunctional Luminescent Sensor for the Effective Detection of Fe3+, Cr2O72−/CrO42− and Aspartic Acid in Aqueous Systems

Heavy metal ions were common pollutants in water pollution. Amino acids, as important substances in organisms, participate in many life activities. The detection of heavy metal ions and amino acids...

Dual-wavelength electrochemiluminescence ratiometry for hydrogen sulfide detection based on Cd2+-doped g-C3N4 nanosheets

Herein, a novel and facile dual-wavelength ratiometric electrochemiluminescence-resonance energy transfer (ECL-RET) sensor for hydrogen sulfide (H₂S) detection was constructed based on the interaction between S^2- and Cd²⁺-doped g-C₃N₄ nanosheets (NSs). Cd²⁺-doped g-C₃N₄ NSs exhibited a strong ECL emission at 435 nm. In the presence of H₂S, CdS was formed in situ on g-C₃N₄ NSs by the adsorption of S^2- and Cd²⁺, generating another ECL emission at 515 nm. Furthermore, the overlapping of the absorption spectrum of the formed CdS and the ECL emission spectrum of g-C₃N₄ NSs led to a feasible RET, thus quenching the ECL intensity from g-C₃N₄ at 435 nm. Through an ECL decrease at 435 nm and an increase at 515 nm, a dual-wavelength ratiometric ECL-RET system for H₂S was designed. The sensor exhibited a lower detection limit of 0.02 μM with a wide linear range of 0.05-100.0 μM. In addition, the applicability of the method was validated by plasma sample analysis with a linear range of 80.0-106.0%. We believe that such a proposal would provide new insight into advanced dual-wavelength ECL ratiometric assays.

Iodide-enhanced Cu-MOF nanomaterials for the amplified colorimetric detection of Fe3

In this paper, a novel colorimetric strategy based on iodide ion (I^-) and Cu-MOF catalysis was developed for simple, low-cost, and naked-eye detection of Fe³⁺. Both I^- and MOFs display catalytic activity toward peroxidase substrate 3,3',5,5'-tetramethylbenzidine (TMB). Adsorption and embedding of I^- in Cu-MOF generates Cu-MOF/I with a three-dimensional porous structure that exhibits higher specific surface area, providing more active sites to facilitate interaction with TMB, resulting in enhanced catalytic efficiency. Reports have shown that Fe³⁺ can oxidize TMB in the absence of H₂O₂. We found that as Fe³⁺ concentration increases, the color of the system gradually deepens and the UV absorption peak gradually increases, thus providing a colorimetric sensor for quantitative Fe³⁺ detection. The detection limit (LOD) obtained in the presence of I^- is 200 nM; however, in the absence of I^-, the LOD is approx. 10 μM. Thus, the sensing system is ideal for signal amplified analysis of Fe³⁺. In the presence of various interfering metal ions, the developed sensing system displays excellent selectivity. Additionally, the practical application to Fe³⁺ detection in real samples is explored.

Encapsulation Capacity of β-Cyclodextrin Stabilized Silver Nanoparticles towards Creatinine Enhances the Colorimetric Sensing of Hydrogen Peroxide in Urine

The β-cyclodextrin shell of synthesized silver nanoparticles (βCD-AgNPs) are found to enhance the detection of hydrogen peroxide in urine when compared to the Horse Radish Peroxidase assay kit. Nanoparticles are confirmed by the UV-Vis absorbance of their localized surface plasmonic resonance (LSPR) at 384 nm. The mean size of the βCD-AgNPs is 53 nm/diameter; XRD analysis shows a face-centered cubic structure. The crystalline structure of type 4H hexagonal nature of the AgNPs with 2.4 nm β-CD coating onto is confirmed using aberration corrected high-resolution transmission electron microscopy (HRTEM). A silver atomic lattice at 2.50 Å and 2.41 Å corresponding to (100) and (101) Miller indices is confirmed using the HRTEM. The scope of βCD-AgNPs to detect hydrogen peroxide (H2O2) in aqueous media and human urine is investigated. The test is optimized by examining the effect of volumes of nanoparticles, the pH of the medium, and the kinetic and temperature effect on H2O2 detection. The βCD-AgNPs test is used as a refined protocol, which demonstrated improved sensitivity towards H2O2 in urine compared to the values obtained by the Horse Radish Assay kit. Direct assessment of H2O2 by the βCD-AgNPs test presented always with a linear response in the nM, μM, and mM ranges with a limit of detection of 1.47 nM and a quantitation limit of 3.76 nM. While a linear response obtained from 1.3 to 37.3 nmoles of H2O2/mole creatinine with a slope of 0.0075 and regression coefficient of 0.9955 when the βCD-AgNPs is used as refined test of creatinine. Values ranging from 34.62 ± 0.23 nmoles of H2O2/mole of creatinine and 54.61 ± 1.04 nmoles of H2O2/mole of creatinine when the matrix is not diluted and between 32.16 ± 0.42 nmoles of H2O2/mole of creatinine and 49.66 ± 0.80 nmoles of H2O2/mole of creatinine when the matrix is twice diluted are found in freshly voided urine of seven apparent healthy men aged between 20 and 40 years old.