Portable microfluidic device with thermometer-like display for real-time visual quantitation of Cadmium(II) contamination in drinking water

Hybrid Nanoparticle/DNAzyme Electrochemical Biosensor for the Detection of Divalent Heavy Metal Ions and Cr3

A hybrid noble nanoparticle/DNAzyme electrochemical biosensor is proposed for the detection of Pb2+, Cd2+, and Cr3+. The sensor takes advantage of a well-studied material that is known for its selective interaction with heavy metal ions (i.e., DNAzymes), which is combined with metallic nanoparticles. The double-helix structure of DNAzymes is known to dissociate into smaller fragments in the presence of specific heavy metal ions; this results in a measurable change in device resistance due to the collapse of conductive inter-nanoparticle DNAzyme bridging. The paper discusses the effect of DNAzyme anchoring groups (i.e., thiol and amino functionalization groups) on device performance and reports on the successful detection of all three target ions in concentrations that are well below their maximum permitted levels in tap water. While the use of DNAzymes for the detection of lead in particular and, to some extent, cadmium has been studied extensively, this is one of the few reports on the successful detection of chromium (III) via a sensor incorporating DNAzymes. The sensor showed great potential for its future integration in autonomous and remote sensing systems due to its low power characteristics, simple and cost-effective fabrication, and easy automation and measurement.

A novel lipid droplets/lysosomes-targeting colorimetric and ratiometric fluorescent probe for Cu2+ and its application

A novel multifunctional fluorescent probe LL2 was prepared via a one-step condensation reaction between 3-formyl-N-butylcarbazole and 2-Hydroxy-1-naphthylhydrazone. LL2 can work as a colorimetric probe for Cu²⁺, and can also selectively recognize Cu²⁺ via ratiometric fluorescence signal. After the addition of Cu²⁺, the probe LL2 responded rapidly within 5 s and reached stability within 30 s. In natural light, when Cu²⁺ were added to the solution, the color of probe LL2 changed from yellowish to colorless, while there was a discernible fluorescence changed from green to blue under a 365 nm UV lamp. The ratiometric fluorescence intensity (F₄₄₉/F₅₁₀) showed a good linear relationship (R² = 0.9902) with Cu²⁺ concentration in the concentration range of 0-5 μmol/L, and the minimum detection limit was 1.96 μM. Cell imaging experiments showed that LL2 could capture fluorescence signals in the green and blue channels of HepG2 cells through fluorescence confocal microscope, and successfully recognize exogenous Cu²⁺ in HepG2 cells. In addition, fluorescence co-localization experiments showed that LL2 could target both lipid droplets and lysosomes. Meanwhile, LL2 could be applied to filter paper strip assay and detection of Cu²⁺ in actual water samples. These results indicated that probe LL2 has a good capability for monitoring Cu²⁺ in environment and living cells.

Screen-printed electrochemical sensors for environmental monitoring of heavy metal ion detection

Heavy metal ions (HMIs) are known to cause severe damages to the human body and ecological environment. And considering the current alarming situation, it is crucial to develop a rapid, sensitive, robust, economical and convenient method for their detection. Screen printed electrochemical technology contributes greatly to this task, and has achieved global attention. It enabled the mass transmission rate and demonstrated ability to control the chemical nature of the measure media. Besides, the technique offers advantages like linear output, quick response, high selectivity, sensitivity and stability along with low power requirement and high signal-to-noise ratio. Recently, the performance of SPEs has been improved employing the most effective and promising method of the incorporation of different nanomaterials into SPEs. Especially, in electrochemical sensors, the incorporation of nanomaterials has gained extensive attention for HMIs detection as it exhibits outstanding features like broad electrochemical window, large surface area, high conductivity, selectivity and stability. The present review focuses on the recent progress in the field of screen-printed electrochemical sensors for HMIs detection using nanomaterials. Different fabrication methods of SPEs and their utilization for real sample analysis of HMIs using various nanomaterials have been extensively discussed. Additionally, advancement made in this field is also discussed taking help of the recent literature.

Microfluidic particle dam for direct visualization of SARS-CoV-2 antibody levels in COVID-19 vaccinees

Various COVID-19 vaccines are currently deployed, but their immunization varies and decays with time. Antibody level is a potent correlate to immune protection, but its quantitation relies on intensive laboratory techniques. Here, we report a decentralized, instrument-free microfluidic device that directly visualizes SARS-CoV-2 antibody levels. Magnetic microparticles (MMPs) and polystyrene microparticles (PMPs) can bind to SARS-CoV-2 antibodies simultaneously. In a microfluidic chip, this binding reduces the incidence of free PMPs escaping from magnetic separation and shortens PMP accumulation length at a particle dam. This visual quantitative result enables use in either sensitive mode [limit of detection (LOD): 13.3 ng/ml; sample-to-answer time: 70 min] or rapid mode (LOD: 57.8 ng/ml; sample-to-answer time: 20 min) and closely agrees with the gold standard enzyme-linked immunosorbent assay. Trials on 91 vaccinees revealed higher antibody levels in mRNA vaccinees than in inactivated vaccinees and their decay in 45 days, demonstrating the need for point-of-care devices to monitor immune protection.

Design of a dual responsive receptor with oxochromane hydrazide moiety to monitor toxic Hg2+ and Cd2+ ions: Usage on real samples and live cells

In this work, we report a facile receptor OMB [N',N"'-(3-((4-oxochroman-3-yl)methylene)pentane-2,4- diylidene)bis(4-methoxybenzohydrazide)] for the simultaneous detection of toxic analytes (Hg²⁺ and Cd²⁺ ions) in environment and biological samples. The receptor OMB exhibits an excellent selectivity and sensitivity which was determined using absorption and emission spectra. The receptor OMB shows rapid detection with lowest LOD (0.62 nM for Hg²⁺ ions and 0.77 nM for Cd²⁺ ions) and LOQ (2.08 nM for Hg²⁺ ions and 2.57 nM for Cd²⁺ ions) values. In addition, the receptor OMB exhibits 1:1 binding stoichiometry towards Hg²⁺ and Cd²⁺ ions with binding constant values of 5.5 × 10⁶ M^-1 and 4.6 × 10⁶ M^-1. Moreover, the synthesized receptor OMB possess ability to detect these analytes (Hg²⁺ and Cd²⁺ ions) in realistic samples (food and water) which was recognized using photoluminescence spectroscopy technique. In addition, the receptor OMB is also utilized to detect both the analytes in live HeLa cells. Thus, the overall results indicate that the receptor OMB was more suitable to detect the toxic analytes (Hg²⁺ and Cd²⁺ ions) present in the environment.

Modification Strategies of Kapok Fiber Composites and Its Application in the Adsorption of Heavy Metal Ions and Dyes from Aqueous Solutions: A Systematic Review

Kapok fiber (Ceiba pentandra) belongs to a group of natural fibers that are mainly composed of cellulose, lignin, pectin, and small traces of inorganic compounds. These fibers are lightweight with hollow tubular structure that is easy to process and abundant in nature. Currently, kapok fibers are used in industry as filling material for beddings, upholstery, soft toys, and nonwoven materials. However, kapok fiber has also a potential application in the adsorptive removal of heavy metal ions and dyes from aqueous systems. This study aims to provide a comprehensive review about the recent developments on kapok fiber composites including its chemical properties, wettability, and surface morphology. Effective and innovative kapok fiber composites are analyzed with the help of characterization tools such as scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and Brunauer-Emmett-Teller analysis. Different pre-treatment methods such as alkali and acid pre-treatment, oxidation pre-treatment, and Fenton reaction are discussed. These techniques are applied to enhance the hydrophilicity and to generate rougher fiber surfaces. Moreover, surface modification and synthesis of kapok fiber-based composites and its environmental applications are examined. There are various methods in the fabrication of kapok fiber composites that include chemical modification and polymerization. These procedures allow the kapok fiber composites to have higher adsorption capacities for selective heavy metal and dye removal.

Development of a DNAzyme-based colorimetric biosensor assay for dual detection of Cd2+ and Hg2

A colorimetric biosensor assay has been developed for Cd²⁺ and Hg²⁺ detection based on Cd²⁺-dependent DNAzyme cleavage and Hg²⁺-binding-induced conformational switching of the G-quadruplex fragment. Two types of multifunctional magnetic beads (Cd-MBs and Hg-MBs) were synthesized by immobilizing two functionalized DNA sequences on magnetic beads via avidin-biotin chemistry. For Cd²⁺ detection, Cd-MBs are used as recognition probes, which are modified with a single phosphorothioate ribonucleobase (rA) substrate (PS substrate) and a Cd²⁺-specific DNAzyme (Cdzyme). In the presence of Cd²⁺, the PS substrate is cleaved by Cdzyme, and single-stranded DNA is released as the signal transduction sequence. After molecular assembly with the other two oligonucleotides, duplex DNA is produced, and it can be recognized and cleaved by FokI endonuclease. Thus, a signal output component consisting of a G-quadruplex fragment is released, which catalyzes the oxidation of ABTS with the addition of hemin and H₂O₂, inducing a remarkably amplified colorimetric signal. To rule out false-positive results and reduce interference signals, Hg-MBs modified with poly-T fragments were used as Hg²⁺ accumulation probes during the course of Cd²⁺ detection. On the other hand, Hg-MBs can perform their second function in Hg²⁺ detection by changing the catalytic activity of the G-quadruplex/hemin DNAzyme. In the presence of Hg²⁺, the G-quadruplex structure in Hg-MBs is disrupted upon Hg²⁺ binding. In the absence of Hg²⁺, an intensified color change can be observed by the naked eye for the formation of intact G-quadruplex/hemin DNAzymes. The biosensor assay exhibits excellent selectivity and high sensitivity. The detection limits for Cd²⁺ and Hg²⁺ are 1.9 nM and 19.5 nM, respectively. Moreover, the constructed sensors were used to detect environmental water samples, and the results indicate that the detection system is reliable and could be further used in environmental monitoring. The design strategy reported in this study could broadly extend the application of metal ion-specific DNAzyme-based biosensors.