Förster resonance energy transfer-based molecularly imprinted polymer /amine-functionalized metal-organic framework nanocomposite for trace level detection of 4-nitrophenol

A hybrid molecularly imprinted ratiometric fluorescent probe based on Eu-MOFs cross-linked fluorescence enhancement for smartphone-assisted detection of dicamba

A hybrid molecularly imprinted ratiometric fluorescence probe was constructed based on the characteristic that dicamba (DIC) can brighten the blue fluorescence of Eu-MOFs. According to the change of the fluorescence color of the probe solution from yellow to blue, a smartphone-assisted detection platform was established to realize the visual detection of DIC. The detection limits of fluorescence and smartphone analysis are 0.08 μM and 0.27 μM, respectively. The sensing mechanism study shows that the reaction belongs to the cross-linking fluorescence enhancement effect. Eu-MOFs form hydrogen bonds with the carboxyl groups of DIC and form a dendritic network structure, which inhibits the non-radiative transition of the luminescent center and improves the charge transfer efficiency to achieve enhanced fluorescence. So, this work provides a method for the fluorescence quantitative detection and on-site visual detection of DIC by smartphone in Hordeum vulgare and Setaria italica.

Fluorescence turn-on recognition of trace acetamiprid in seawater using selective molecularly imprinted polymer-based nanoprobe

A novel imprinted composite nanoprobe for fluorescence turn-on recognition of acetamiprid was fabricated and applied to rapidly and sensitively detect trace-level acetamiprid in seawater. The fluorescent probe was prepared using modified fluorescein isothiocyanate as a response unit to improve the sensitivity of signal transmission. The quantitative analysis of acetamiprid was obtained by measuring fluorescence enhancement efficiency of the probe. Under optimal conditions, a good linear relationship with a determination coefficient of 0.9988 was demonstrated in the range of 0-45 μg L-1 and the limit of detection was 1.5 μg L-1. The developed fluorescence-enhancing nanoprobe was utilized in determination of acetamiprid in seawater samples and achieved recoveries from 96.00 % to 104.00 % with the relative standard deviations <5.88 % (n = 3). This study offered a promising strategy for simple, reliable and sensitive detection of acetamiprid by embedding fluorescent dye in molecularly imprinted material as highly selective probes.

A Cd (II)‐based Metal–Organic Framework as Switch‐Off Fluorescence Sensors for Antibiotic Detection

Detecting antibiotic residues is crucial for monitoring their excessive use in healthcare and agricultural practices. Herein, a new 3D metal–organic framework (MOF) containing {[Cd (bpyp)(sdba)]·DMF·2H2O}n (1) (bpyp = 2,5‐bis (pyrid‐4‐yl)pyridine and H2sdba = 4,4′‐sulfonyldibenzoic acid) has been designed and synthesized. MOF 1 displays sensitive detection tetracycline (TCY) with a limit of detection below 7.67 × 10−6 M in an aqueous solution. The detection mechanism involves competitive absorption between MOF 1 and antibiotics, supported by UV–vis spectroscopy and fluorescence lifetime measurements. MOF 1 exhibits a visible fluorescence response to TCY under a 254 nm UV lamp. MOF 1 is applied in the quantitative detection of TCY in lake water with the recovery based on the sensing platform was 92.26–107.54% with RSD (%) less than 4.38%, indicating outstanding reliability.

Advances in 4-Nitrophenol Detection and Reduction Methods and Mechanisms: An Updated Review

This review emphasizes the progress in identifying and eliminating para-nitrophenol (4-NP), a toxic organic compound. It covers various strategical methods and materials, including organic and inorganic nanomaterials, for detecting and reducing 4-NP. Detection techniques such as electrochemical methods. Optical fiber-based surface plasmon resonance and photoluminescence, as well as the mechanisms of Förster Resonance Energy Transfer (FRET) and Inner Filter Effect (IFE) in fluorescence detection, are presented. Removal techniques for this contaminant include homogeneous catalysis, electrocatalysis, photocatalysis, and thermocatalysis, and their reaction mechanisms are also discussed. Further, the theoretical perspectives of 4-NP detection and reduction, parameters influencing the activities, and future perspectives are also reviewed in detail.

Ultrasensitive fluorescence detection of gonyautoxins in seawater using a novel molecularly imprinted nanoprobe

Gonyautoxins (GTXs), a group of potent neurotoxins belonging to paralytic shellfish toxins (PSTs), are often associated with harmful algal blooms of toxic dinoflagellates in the sea and represent serious health and ecological concerns worldwide. In the study, a highly selective and sensitive fluorescence nanoprobe was constructed based on photoinduced electron transfer recognition mechanism to rapidly detect GTXs in seawater, using specific entrapment of molecularly imprinted polymers (MIPs) combined with fluorescence analyses. The green emissive fluorescein isothiocyanate was grafted in a silicate matrix as a signal transducer and fluorescence intensity of the nanoprobe with a core-shell structure exhibited a strong enhancement due to efficient analyte blockage in a short response time. Under optimal conditions, the developed MIPs nanoprobe presented an excellent analytical performance for spiked seawater samples including a recovery from 94.44 % to 98.23 %, a linear range between 0.018 nmol L-1 and 0.36 nmol L-1, as well as good accuracy. Furthermore, the method had extremely high sensitivity, with limit of detection obtained as 0.005 nmol L-1 for GTXs and GTX2/3. Finally, the nanoprobe was applied for the determination of GTXs in seven natural seawater samples with GTXs mixture (0.035-0.058 nmol L-1) or single GTX2/3 (0.033-0.050 nmol L-1), and the results agreed well with those of a UPLC-MS/MS method. The findings of our study suggest that the constructed MIPs-based fluorescence enhancement nanoprobe was suitable for rapid, selective and ultrasensitive detection of GTXs, particular GTX2/3, in natural seawater samples.

Orange peel-derived carbon dots/Cu-MOF nanohybrid for fluorescence determination of l-ascorbic acid and Fe3. Anal Chim Acta 2024;1287:342066. [PMID: 38182373 DOI: 10.1016/j.aca.2023.342066]

Recycling and reuse of biomass waste in synthesis of nanomaterials have recently received much attention as an effective solution for environmental protection and sustainable development. Herein, nitrogen-doped carbon dots (N-CDs) with blue emission were synthesized from the orange peels as a precursor through a simple hydrothermal method and then, modified with ethylenediamine tetraacetic acid (N-CD@EDTA). The N-CD@EDTA was embedded as a fluorophore in Cu-based metal-organic framework (MOF-199) structure (N-CD@EDTA/MOF-199) to construct fluorescence sensor toward l-ascorbic acid (L-AA) determination. The N-CD@EDTA/MOF-199 nanohybrid significantly and selectively turned on toward L-AA determination during the fluorimetric experiments. Under optimal conditions, the probe showed a suitable linear response in the concentration range of 10 nM-100 μM with a low limit of detection (LOD) of 8.6 nM and high sensitivity of 0.201 μM-1. The possible mechanism of recognition and adsorption, including the reduction of Cu 2+ nodes in the MOF-199 structure in the presence of L-AA and the release of trapped N-CD@EDTA into the solution, was explored. Moreover, the N-CD@EDTA/MOF-199/L-AA (100 μM) system was further applied as a fluorescent "on-off" sensor for Fe3+ determination with a LOD of 1.15 μM. The proposed probe was successfully used in orange juice and water samples to determine L-AA and Fe3+ with satisfactory recovery, which displays the promising capability of sensor in real samples. The recoveries obtained by suggested method are consistent with that obtained from high performance liquid chromatography (HPLC) and atomic absorption spectroscopy which confirm the favorable characteristic of the sensor for accurate determination of L-AA and Fe3+ in practical applications.

A label-free ratiometric fluorescent aptasensor based on a peroxidase-mimetic multifunctional ZrFe-MOF for the determination of tetrodotoxin

A Fe/Zr bimetal-organic framework (ZrFe-MOF) is utilized to establish a ratiometric fluorescent aptasensor for the determination of tetrodotoxin (TTX). The multifunctional ZrFe-MOF possesses inherent fluorescence at 445 nm wavelength, peroxidase-mimetic activity, and specific recognition and adsorption capabilities for aptamers, owing to its organic ligand, and Fe and Zr nodes. The peroxidation of o-phenylenediamine (OPD) substrate generates fluorescent 2,3-diaminophenazine (OPDox) at 555 nm wavelength, thus quenching the inherent fluorescence of ZrFe-MOF because of the fluorescence resonance energy transfer (FRET) effect. TTX aptamers, which are absorbed on the material surface without immobilization or fluorescent labeling, inhibit the peroxidase-mimetic activity of ZrFe-MOF. It causes the decreased OPDox fluorescence at 555 nm wavelength and the inverse restoration of ZrFe-MOF fluorescence at 445 nm wavelength. With TTX, the aptamers specifically bind to TTX, triggering rigid complex release from ZrFe-MOF surface and reactivating its peroxidase-mimetic activity. Consequently, the two fluorescence signals exhibit opposite changes. Employing this ratiometric strategy, the determination of TTX is achieved with a detection limit of 0.027 ng/mL and a linear range of 0.05-500 ng/mL. This aptasensor also successfully determines TTX concentrations in puffer fish and clam samples, demonstrating its promising application for monitoring trace TTX in food safety.

Fluorescence detection of 4-nitrophenol and α-glucosidase activity based on 4-nitrophenol-regulated fluorescence of silicon nanoparticles

A fluorescence assay for the detection of 4-nitrophenol (4-NP), α-glucosidase (α-Glu) activity and α-Glu inhibitors (AGIs) is developed based on the inner filter effect (IFE), a flexible and simple signal transfer strategy. In this assay, silicon nanoparticles (Si NPs) synthesized under mild and easily accessible conditions are employed as fluorescent indicators. 4-NP efficaciously quenches the fluorescence of Si NPs through the IFE at a very rapid rate, thus achieving 4-NP detection in a mix-to-read manner, which is suitable for on-site detection. The quenching mechanism has been comprehensively studied and confirmed. More significantly, based on the fact that 4-NP can be generated through α-Glu-catalyzed hydrolysis of 4-nitrophenyl-α-D-glucopyranoside (NPG), the fluorescence detection of α-Glu activity is legitimately achieved by employing NPG as the substrate. The linear ranges for 4-NP and α-Glu activity detection are 0.5-60 μM and 0.5-60 mU mL-1 with low detection limits of 0.074 μM and 0.094 mU mL-1, respectively. This method not only can preciously assay targets in real samples, but is also capable of screening AGIs as drugs as well as assessing their inhibition efficiency.

Rapid and sensitive detection of methyl parathion in rice based on carbon quantum dots nano-fluorescence probe and inner filter effect

A highly sensitive fluorescent sensing system of novel carbon quantum dots nano-fluorescent probe based on corn stalks was established for the determination of methyl parathion by alkaline catalytic hydrolysis and inner filter effect mechanism. The carbon quantum dots nano-fluorescent probe was prepared from corn stalks using an optimized one-step hydrothermal method. The detection mechanism of methyl parathion was revealed. The reaction conditions were optimized. The linear range, sensitivity and selectivity of the method were evaluated. Under the optimal conditions, the carbon quantum dots nano-fluorescent probe exhibited high selectivity and sensitivity to methyl parathion, achieving a linear range of 0.005-14 µg/mL. The fluorescence sensing platform was applied to the detection of methyl parathion in rice samples, and the results showed that the recoveries range from 91.64 to 104.28 %, and the relative standard deviations were less than 4.17 %. The detection limit for methyl parathion in rice samples was 1.22 µg/kg, and the limit of quantitation (LOQ) was 4.07 µg/kg, which was very satisfactory.

A Turn-Off Fluorescent Biomimetic Sensor Based on a Molecularly Imprinted Polymer-Coated Amino-Functionalized Zirconium (IV) Metal-Organic Framework for the Ultrasensitive and Selective Detection of Trace Oxytetracycline in Milk

Developing sensitive and effective methods to monitor oxytetracycline residues in food is of great significance for maintaining public health. Herein, a fluorescent sensor (NH₂-UIO-66 (Zr)@MIP) based on a molecularly imprinted polymer-coated amino-functionalized zirconium (IV) metal-organic framework was successfully constructed and first used for the ultrasensitive determination of oxytetracycline. NH₂-UIO-66 (Zr), with a maximum emission wavelength of 455 nm under 350 nm excitation, was prepared using a microwave-assisted heating method. The NH₂-UIO-66 (Zr)@MIP sensor with specific recognition sites for oxytetracycline was then acquired by modifying a molecularly imprinted polymer on the surface of NH₂-UIO-66 (Zr). The introduction of NH₂-UIO-66 (Zr) as both a signal tag and supporter can strengthen the sensitivity of the fluorescence sensor. Thanks to the combination of the unique characteristics of the molecularly imprinted polymer and NH₂-UIO-66 (Zr), the prepared sensor not only exhibited a sensitive fluorescence response, specific identification capabilities and a high selectivity for oxytetracycline, but also showed good fluorescence stability, satisfactory precision and reproducibility. The fabricated sensor displayed a fluorescent linear quenching in the OTC concentration range of 0.05-40 μg mL^-1, with a detection limit of 0.012 μg mL^-1. More importantly, the fluorescence sensor was finally applied for the detection of oxytetracycline in milk, and the results were comparable to those obtained using the HPLC approach. Hence, the NH₂-UIO-66 (Zr)@MIP sensor possesses great application potential for the accurate evaluation of trace oxytetracycline in dairy products.