Method for cortical bone structural analysis from magnetic resonance images

Guided cortical and cancellous bone formation using a minimally invasive technique of BMSC- and BMP-2-laden visible light-cured carboxymethyl chitosan hydrogels

A cavity defect inside the bone is formed by deformed cancellous bone from the fixation of the cortical bone, and consequently, abnormal bone healing occurs. Therefore, repairing cancellous bone defects is a remarkable topic in orthopedic surgery. In this study, we prepared bone marrow-derived stem cell (BMSC)-laden and bone morphogenetic protein-2 (BMP-2)-laden visible light-cured carboxymethyl chitosan (CMCS) hydrogels for cortical and cancellous bone healing. Proton nuclear magnetic resonance (¹H NMR) analysis confirmed the methacrylation of CMCS (CMCSMA), resulting in 55 % of substitution. The higher concentration of CMCSMA hydrogel resulted in the lower swelling ratio, the larger viscosity, the slower degradation behavior, and the stronger compressive strength. The 5 w/v% hydrogel exhibited a controlled BMP-2 release for 14 days, while the 7 and 10 w/v% hydrogels displayed a controlled BMP-2 release for 28 days. Results of in vitro cytotoxicity and cell proliferation assays revealed the biocompatibility of the samples. In vivo animal tests demonstrated that BMSC- and BMP-2-laden 7 w/v% CMCSMA (CMCSMA+Cell+BMP-2) improved bone formation in the defected cortical and cancellous bones of the femur, as analyzed by micro-computed tomography (micro-CT) and histological evaluations. Consequently, we suggested that CMCSMA+Cell+BMP-2 can be a valuable scaffold for restoring cortical and cancellous bone defects.

Osseous Pathology on Wrist Magnetic Resonance Imaging

Advanced imaging of the osseous structures of the wrist by magnetic resonance imaging (MRI) yields powerful information regarding marrow composition and overall bone structure. Various forms of pathology, both benign and malignant, have unique marrow signal abnormalities that can be easily detected by MRI given its high sensitivity to radiographically occult processes. In particular, osseous pathology can be seen in the setting of traumatic, degenerative, congenital, infectious, and neoplastic conditions. The acuity or chronicity of these conditions can often be determined by imaging to aid in appropriate therapy. A thorough understanding of the breadth of pathology and corresponding MRI appearances can allow the interpreting radiologist to formulate a concise and accurate assessment of an examination.

Impact loading history modulates hip fracture load and location: A finite element simulation study of the proximal femur in female athletes

Sideways falls impose high stress on the thin superolateral cortical bone of the femoral neck, the region regarded as a fracture-prone region of the hip. Exercise training is a natural mode of mechanical loading to make bone more robust. Exercise-induced adaptation of cortical bone along the femoral neck has been previously demonstrated. However, it is unknown whether this adaption modulates hip fracture behavior. The purpose of this study was to investigate the influence of specific exercise loading history on fall-induced hip fracture behavior by estimating fracture load and location with proximal femur finite element (FE) models created from magnetic resonance images (MRI) of 111 women with distinct exercise histories: 91 athletes (aged 24.7 ± 6.1 years, >8 years competitive career) and 20 women as controls (aged 23.7 ± 3.8 years). The athletes were divided into five groups based on typical loading patterns of their sports: high-impact (H-I: 9 triple-jumpers and 10 high jumpers), odd-impact (O-I: 9 soccer and 10 squash players), high-magnitude (H-M: 17 power-lifters), repetitive-impact (R-I: 18 endurance runners), and repetitive non-impact (R-NI: 18 swimmers). Compared to the controls, the H-I, O-I, and R-I groups had significantly higher (11-26%, p < 0.05) fracture loads. Also, the fracture location in the H-I and O-I groups was significantly more proximal (7-10%) compared to the controls. These results suggest that an exercise loading history of high impacts, impacts from unusual directions, or repetitive impacts increases the fracture load and may lower the risk of fall-induced hip fracture.

Correlative Analysis of Vertebral Trabecular Bone Microarchitecture and Mechanical Properties: A Combined Ultra-high Field (7 Tesla) MRI and Biomechanical Investigation

STUDY DESIGN

High-resolution imaging and biomechanical investigation of ex-vivo vertebrae.

OBJECTIVE

The aim of this study was to assess bone microarchitecture of cadaveric vertebrae using ultra-high field (UHF) 7 Tesla magnetic resonance imaging (MRI) and to determine whether the corresponding microarchitecture parameters were related to bone mineral density (BMD) and bone strength assessed by dual-energy x-ray absorptiometry (DXA) and mechanical compression tests.

SUMMARY OF BACKGROUND DATA

Limitations of DXA for the assessment of bone fragility and osteoporosis have been recognized and criteria of microarchitecture alteration have been included in the definition of osteoporosis. Although vertebral fracture is the most common osteoporotic fracture, no study has assessed directly vertebral trabecular bone microarchitecture.

METHODS

BMD of 24 vertebrae (L2, L3, L4) from eight cadavers was investigated using DXA. The bone volume fraction (BVF), trabecular thickness (Tb.Th), and trabecular spacing (Tb.Sp) of each vertebra were quantified using UHF MRI. Measurements were performed by two operators to characterize the inter-rater reliability. The whole set of specimens underwent mechanical compression tests to failure and the corresponding failure stress was calculated.

RESULTS

The inter-rater reliability for bone microarchitecture parameters was good with intraclass correlation coefficients ranging from 0.82 to 0.94. Failure load and stress were significantly correlated with BVF, Tb.Sp, and BMD (P < 0.05). Tb.Th was only correlated with the failure stress (P < 0.05). Multiple regression analysis demonstrated that the combination of BVF and BMD improved the prediction of the failure stress from an adjusted R = 0.384 for BMD alone to an adjusted R = 0.414.

CONCLUSION

We demonstrated for the first time that the vertebral bone microarchitecture assessed with UHF MRI was significantly correlated with biomechanical parameters. Our data suggest that the multimodal assessment of BMD and trabecular bone microarchitecture with UHF MRI provides additional information on the risk of vertebral bone fracture and might be of interest for the future investigation of selected osteoporotic patients.

LEVEL OF EVIDENCE

N /A.

Exercise loading history and femoral neck strength in a sideways fall: A three-dimensional finite element modeling study

Over 90% of hip fractures are caused by falls. Due to a fall-induced impact on the greater trochanter, the posterior part of the thin superolateral cortex of the femoral neck is known to experience the highest stress, making it a fracture-prone region. Cortical geometry of the proximal femur, in turn, reflects a mechanically appropriate form with respect to habitual exercise loading. In this finite element (FE) modeling study, we investigated whether specific exercise loading history is associated with femoral neck structural strength and estimated fall-induced stresses along the femoral neck. One hundred and eleven three-dimensional (3D) proximal femur FE models for a sideways falling situation were constructed from magnetic resonance (MR) images of 91 female athletes (aged 24.7±6.1years, >8years competitive career) and 20 non-competitive habitually active women (aged 23.7±3.8years) that served as a control group. The athletes were divided into five distinct groups based on the typical loading pattern of their sports: high-impact (H-I: triple-jumpers and high-jumpers), odd-impact (O-I: soccer and squash players), high-magnitude (H-M: power-lifters), repetitive-impact (R-I: endurance runners), and repetitive non-impact (R-NI: swimmers). The von Mises stresses obtained from the FE models were used to estimate mean fall-induced stresses in eight anatomical octants of the cortical bone cross-sections at the proximal, middle, and distal sites along the femoral neck axis. Significantly (p<0.05) lower stresses compared to the control group were observed: the H-I group - in the superoposterior (10%) and posterior (19%) octants at the middle site, and in the superoposterior (13%) and posterior (22%) octants at the distal site; the O-I group - in the superior (16%), superoposterior (16%), and posterior (12%) octants at the middle site, and in the superoposterior (14%) octant at the distal site; the H-M group - in the superior (13%) and superoposterior (15%) octants at the middle site, and a trend (p=0.07, 9%) in the superoposterior octant at the distal site; the R-I group - in the superior (14%), superoposterior (23%) and posterior (22%) octants at the middle site, and in the superoposterior (19%) and posterior (20%) octants at the distal site. The R-NI group did not differ significantly from the control group. These results suggest that exercise loading history comprising various impacts in particular is associated with a stronger femoral neck in a falling situation and may have potential to reduce hip fragility.

Automated cortical bone segmentation for multirow-detector CT imaging with validation and application to human studies

PURPOSE

Cortical bone supports and protects human skeletal functions and plays an important role in determining bone strength and fracture risk. Cortical bone segmentation at a peripheral site using multirow-detector CT (MD-CT) imaging is useful for in vivo assessment of bone strength and fracture risk. Major challenges for the task emerge from limited spatial resolution, low signal-to-noise ratio, presence of cortical pores, and structural complexity over the transition between trabecular and cortical bones. An automated algorithm for cortical bone segmentation at the distal tibia from in vivo MD-CT imaging is presented and its performance and application are examined.

METHODS

The algorithm is completed in two major steps-(1) bone filling, alignment, and region-of-interest computation and (2) segmentation of cortical bone. After the first step, the following sequence of tasks is performed to accomplish cortical bone segmentation-(1) detection of marrow space and possible pores, (2) computation of cortical bone thickness, detection of recession points, and confirmation and filling of true pores, and (3) detection of endosteal boundary and delineation of cortical bone. Effective generalizations of several digital topologic and geometric techniques are introduced and a fully automated algorithm is presented for cortical bone segmentation.

RESULTS

An accuracy of 95.1% in terms of volume of agreement with manual outlining of cortical bone was observed in human MD-CT scans, while an accuracy of 88.5% was achieved when compared with manual outlining on postregistered high resolution micro-CT imaging. An intraclass correlation coefficient of 0.98 was obtained in cadaveric repeat scans. A pilot study was conducted to describe gender differences in cortical bone properties. This study involved 51 female and 46 male participants (age: 19-20 yr) from the Iowa Bone Development Study. Results from this pilot study suggest that, on average after adjustment for height and weight differences, males have thicker cortex (mean difference 0.33 mm and effect size 0.92 at the anterior region) with lower bone mineral density (mean difference -28.73 mg/cm(3) and effect size 1.35 at the posterior region) as compared to females.

CONCLUSIONS

The algorithm presented is suitable for fully automated segmentation of cortical bone in MD-CT imaging of the distal tibia with high accuracy and reproducibility. Analysis of data from a pilot study demonstrated that the cortical bone indices allow quantification of gender differences in cortical bone from MD-CT imaging. Application to larger population groups, including those with compromised bone, is needed.

Bone marrow segmentation based on a combined consideration of transverse relaxation processes and Dixon oscillations

The aim of this study was to demonstrate that gradient-echo sampling of single spin echoes can be used to isolate the signal from trabecular bone marrow, with high-quality segmentation and surface reconstructions resulting from the application of simple post-processing strategies. Theoretical expressions of the time-domain single-spin-echo signal were used to simulate signals from bone marrow, non-bone fatty deposits and muscle. These simulations were compared with and used to interpret signals obtained by the application of the gradient-echo sampling of a spin-echo sequence to image the knee and surrounding tissues at 1.5 T. Trabecular bone marrow has a much higher reversible transverse relaxation rate than surrounding non-bone fatty deposits and other musculoskeletal tissues. This observation, combined with a choice of gradient-echo spacing that accentuates Dixon-type oscillations from chemical-shift interference effects, enabled the isolation of bone marrow signal from surrounding tissues through the use of simple image subtraction and thresholding. Three-dimensional renderings of the marrow surface were then readily generated with this approach - renderings that may prove useful for bone morphology assessment, e.g. for the measurement of femoral anteversion. In conclusion, understanding the behavior of signals from bone marrow and surrounding tissue as a function of time through a spin echo facilitates the segmentation and reconstruction of bone marrow surfaces using straightforward post-processing strategies that are typically available on modern radiology workstations.

Novel assessment tools for osteoporosis diagnosis and treatment

This review describes new technologies for the diagnosis and treatment, including fracture risk prediction, of postmenopausal osteoporosis. Four promising technologies and their potential for clinical translation and basic science studies are discussed. These include reference point indentation (RPI), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and magnetic resonance imaging (MRI). While each modality exploits different physical principles, the commonality is that none of them require use of ionizing radiation. To provide context for the new developments, brief summaries are provided for the current state of biomarker assays, fracture risk assessment (FRAX), and other fracture risk prediction algorithms and quantitative ultrasound (QUS) measurements.

Determination of bone architecture and strength in men and women with stage 5 chronic kidney disease

Fractures are common in men and women with dialysis-dependent chronic kidney disease (stage 5D CKD) and are associated with substantial morbidity and mortality. The clinical utility of dual energy X-ray absorptiometry (DXA) and peripheral quantitative computed tomography (pQCT), noninvasive measures of bone mass and architecture that reflect fracture risk in healthy men and women, is uncertain in patients with stage 5D CKD. This review will outline the epidemiology and etiology of fractures and will summarize the published data that describe the association between fractures, bone mass, and bone strength in stage 5D CKD. Fracture risk assessment in stage 5D CKD is complicated as the etiology of fractures is multifactorial and includes impairments in bone quantity and quality. Cross-sectional data suggest that bone density by DXA is lower among stage 5D CKD patients with fractures compared with those without, and that this may be particularly true at cortical sites. However, DXA does not capture bone microarchitecture and cannot differentiate between cortical and trabecular bone. Some, but not all studies, that measure cortical and trabecular bone by pQCT in stage 5D CKD, demonstrate a preferential decrease in cortical bone; however, these studies are limited by small sample sizes and cross-sectional study design. No studies have reported on longitudinal relationships between bone architecture, strength, and incident fractures in patients with stage 5D CKD. Further research is needed to identify noninvasive measures of bone strength that can be used for fracture risk assessment in stage 5D CKD.

Accuracy verification of magnetic resonance imaging (MRI) technology for lower-limb prosthetic research: utilising animal soft tissue specimen and common socket casting materials

Lower limb prosthetic socket shape and volume consistency can be quantified using MRI technology. Additionally, MRI images of the residual limb could be used as an input data for CAD-CAM technology and finite element studies. However, the accuracy of MRI when socket casting materials are used has to be defined. A number of six, 46 mm thick, cross-sections of an animal leg were used. Three specimens were wrapped with Plaster of Paris (POP) and the other three with commercially available silicone interface liner. Data was obtained by utilising MRI technology and then the segmented images compared to corresponding calliper measurement, photographic imaging, and water suspension techniques. The MRI measurement results were strongly correlated with actual diameter, surface area, and volume measurements. The results show that the selected scanning parameters and the semiautomatic segmentation method are adequate enough, considering the limit of clinical meaningful shape and volume fluctuation, for residual limb volume and the cross-sectional surface area measurements.

Noninvasive imaging of bone microarchitecture

The noninvasive quantification of peripheral compartment-specific bone microarchitecture is feasible with high-resolution peripheral quantitative computed tomography (HR-pQCT) and high-resolution magnetic resonance imaging (HR-MRI). In addition to classic morphometric indices, both techniques provide a suitable basis for virtual biomechanical testing using finite element (FE) analyses. Methodical limitations, morphometric parameter definition, and motion artifacts have to be considered to achieve optimal data interpretation from imaging studies. With increasing availability of in vivo high-resolution bone imaging techniques, special emphasis should be put on quality control including multicenter, cross-site validations. Importantly, conclusions from interventional studies investigating the effects of antiosteoporotic drugs on bone microarchitecture should be drawn with care, ideally involving imaging scientists, translational researchers, and clinicians.

Contractile and non-contractile tissue volume and distribution in ankle muscles of young and older adults

Magnetic resonance imaging (MRI) enables accurate in vivo quantification of human muscle volumes, which can be used to estimate subject-specific muscle force capabilities. An important consideration is the amount of contractile and non-contractile tissue in the muscle compartment, which will influence force capability. We quantified age-related differences in the proportion and distribution of contractile and non-contractile tissue in the dorsiflexor and plantar flexor (soleus, and medial and lateral heads of gastrocnemius) muscles, and examined how well these volumes can be estimated from single MRI cross-sections. Axial MRIs of the left leg for 12 young (mean age 27 years) and 12 older (72 years) healthy, active adults were used to compute muscle volumes. Contractile tissue distribution along the leg was characterized by mathematical functions to allow volume prediction from single-slice cross-sectional area (CSA) measurements. Compared to young, older adults had less contractile volume and a greater proportion of non-contractile tissue. In both age groups the proportion of non-contractile tissue increased distally, with the smallest proportion near the maximum compartment CSA. A single CSA measurement predicted contractile volume with 8-11% error, with older adults in the higher end of this range. Using multiple slices improved volume estimates by roughly 50%, with average errors of about 3-4%. These results demonstrate significant age-related differences in non-contractile tissue for the dorsi- and plantar-flexor muscles. Although estimates of contractile volume can be obtained from single CSA measurements, multiple slices are needed for increased accuracy due to inter-individual variations in muscle volume and composition.

Radiological diagnostic progress in skeletal diseases

High-resolution bone imaging has made tremendous progress in the recent past. Both imaging modalities, computed tomography as well as MR imaging, have improved image quality. New developments such as HR-pQCT now make it possible to acquire in vivo images at peripheral sites with isotropic voxel size in a very short time. Further enhancements in the MR field have made it possible to image more central body sites such as the proximal femur with very high spatial resolution. New analysis methods can obtain direct estimates of biomechanical properties and important information related to bone's topology, as well as parameters of scale and orientation. These accomplishments will be essential in the noninvasive assessment of osteoporosis and fracture risk, will provide insight into the mechanisms behind bone loss, and will increasingly play a role as a tool for assessing treatment efficacy.

High-resolution imaging techniques for the assessment of osteoporosis

The importance of assessing the bone's microarchitectural make-up in addition to its mineral density in the context of osteoporosis has been emphasized in several publications. The high spatial resolution required to resolve the bone's microstructure in a clinically feasible scan time is challenging. At present, the best suited modalities meeting these requirements in vivo are high-resolution peripheral quantitative imaging (HR-pQCT) and magnetic resonance imaging (MRI). Whereas HR-pQCT is limited to peripheral skeleton regions like the wrist and ankle, MRI can also image other sites like the proximal femur but usually with lower spatial resolution. In addition, multidetector computed tomography has been used for high-resolution imaging of trabecular bone structure; however, the radiation dose is a limiting factor. This article provides an overview of the different modalities, technical requirements, and recent developments in this emerging field. Details regarding imaging protocols as well as image postprocessing methods for bone structure quantification are discussed.

Advances in osteoporosis imaging

In the assessment of osteoporosis, the measurement of bone mineral density (BMD(a)) obtained from dual energy X-ray absorptiometry (DXA; g/cm(2)) is the most widely used parameter. However, bone strength and fracture risk are also influenced by parameters of bone quality such as micro-architecture and tissue properties. This article reviews the radiological techniques currently available for imaging and quantifying bone structure, as well as advanced techniques to image bone quality. With the recent developments in magnetic resonance (MR) techniques, including the availability of clinical 3T scanners, and advances in computed tomography (CT) technology (e.g. clinical Micro-CT), in-vivo imaging of the trabecular bone architecture is becoming more feasible. Several in-vitro studies have demonstrated that bone architecture, measured by MR or CT, was a BMD-independent determinant of bone strength. In-vivo studies showed that patients with, and without, osteoporotic fractures could better be separated with parameters of bone architecture than with BMD. Parameters of trabecular architecture were more sensitive to treatment effects than BMD. Besides the 3D tomographic techniques, projection radiography has been used in the peripheral skeleton as an additional tool to better predict fracture risk than BMD alone. The quantification of the trabecular architecture included parameters of scale, shape, anisotropy and connectivity. Finite element analyses required highest resolution, but best predicted the biomechanical properties of the bone. MR diffusion and perfusion imaging and MR spectroscopy may provide measures of bone quality beyond trabecular micro-architecture.

Targeted exercises against hip fragility

SUMMARY

Compared to high-impact exercises, moderate-magnitude impacts from odd-loading directions have similar ability to thicken vulnerable cortical regions of the femoral neck. Since odd-impact exercises are mechanically less demanding to the body, this type of exercise can provide a reasonable basis for devising feasible, targeted bone training against hip fragility.

INTRODUCTION

Regional cortical thinning at the femoral neck is associated with hip fragility. Here, we investigated whether exercises involving high-magnitude impacts, moderate-magnitude impacts from odd directions, high-magnitude muscle forces, low-magnitude impacts at high repetition rate, or non-impact muscle forces at high repetition rate were associated with thicker femoral neck cortex.

METHODS

Using three-dimensional magnetic resonance imaging, we scanned the proximal femur of 91 female athletes, representing the above-mentioned five exercise-loadings, and 20 referents. Cortical thickness at the inferior, anterior, superior, and posterior regions of the femoral neck was evaluated. Between-group differences were analyzed with ANCOVA.

RESULTS

For the inferior cortical thickness, only the high-impact group differed significantly (approximately 60%, p = 0.012) from the reference group, while for the anterior cortex, both the high-impact and odd-impact groups differed (approximately 20%, p = 0.042 and p = 0.044, respectively). Also, the posterior cortex was approximately 20% thicker (p = 0.014 and p = 0.006, respectively) in these two groups.

CONCLUSIONS

Odd-impact exercise-loading was associated, similar to high-impact exercise-loading, with approximately 20% thicker cortex around the femoral neck. Since odd-impact exercises are mechanically less demanding to the body than high-impact exercises, it is argued that this type of bone training would offer a feasible basis for targeted exercise-based prevention of hip fragility.

In vivo determination of bone structure in postmenopausal women: a comparison of HR-pQCT and high-field MR imaging

Bone structural measures obtained by two noninvasive imaging tools-3T MRI and HR-pQCT-were compared. Significant but moderate correlations and 2- to 4-fold discrepancies in parameter values were detected, suggesting that differences in acquisition and analysis must be considered when interpreting data from these imaging modalities.

INTRODUCTION

High-field MRI and high resolution (HR)-pQCT are currently being used in longitudinal bone structure studies. Substantial differences in acquisition and analysis between these modalities may influence the quantitative data produced and could potentially influence clinical decisions based on their results. Our goal was to compare trabecular and cortical bone structural measures obtained in vivo by 3T MRI and HR-pQCT.

MATERIALS AND METHODS

Postmenopausal osteopenic women (n = 52) were recruited for this study. HR-pQCT imaging of the radius and tibia was performed using the XtremeCT scanner, with a voxel size of 82 x 82 x 82 microm(3). MR imaging was performed on a 3T Signa scanner using SSFP imaging sequences, with a pixel size of 156 x 156 microm(2) and slice thickness of 500 microm. Structure parameters were calculated using standard HR-pQCT and MRI analysis techniques. Relationships between measures derived from HR-pQCT, MRI, and DXA were studied.

RESULTS

Significant correlations between HR-pQCT and MRI parameters were found (p < 0.0001) and were strongest for Tb.N (r(2) = 0.52), Ct.Th (r(2) = 0.59), and site-specific Tb.Sp (r(2) = 0.54-0.60). MRI and HR-pQCT provided statistically different values of structure parameters (p < 0.0001), with BV/TV and Tb.Th exhibiting the largest discrepancies (MR/HR-pQCT = 3-4). Although differences in the Tb.N values were statistically significant, the mean differences were on the order of our reproducibility measurements. Systematic differences between MRI and HR-pQCT analysis procedures leading to discrepancies in cortical thickness values were observed, with MRI values consistently higher. Minimal correlations were found between MRI or HR-pQCT parameters and DXA BMD or T-score, except between HR-pQCT measures at the radius and the ultradistal radius T-scores, where moderate correlations were found (r(2) = 0.19-0.58).

CONCLUSIONS

This study provides unique insight into two emerging noninvasive tools for bone structure evaluation. Our findings highlight the significant influence of analysis technique on results of in vivo assessment and underscore the importance of accounting for these differences when interpreting results from these modalities.

Tibial geometry is associated with failure load ex vivo: a MRI, pQCT and DXA study

We studied the relations between bone geometry and density and the mechanical properties of human cadaveric tibiae. Bone geometry, assessed by MRI and pQCT, and bone density, assessed by DXA, were significantly associated with bone's mechanical properties. However, cortical density assessed by pQCT was not associated with mechanical properties.

INTRODUCTION

The primary objective of this study was to determine the contribution of cross-sectional geometry (by MRI and pQCT) and density (by pQCT and DXA) to mechanical properties of the human cadaveric tibia.

METHODS

We assessed 20 human cadaveric tibiae. Bone cross-sectional geometry variables (total area, cortical area, and section modulus) were measured with MRI and pQCT. Cortical density and areal BMD were measured with pQCT and DXA, respectively. The specimens were tested to failure in a four-point bending apparatus. Coefficients of determination between imaging variables of interest and mechanical properties were determined.

RESULTS

Cross-sectional geometry measurements from MRI and pQCT were strongly correlated with bone mechanical properties (r(2) range from 0.55 to 0.85). Bone cross-sectional geometry measured by MRI explained a proportion of variance in mechanical properties similar to that explained by pQCT bone cross-sectional geometry measurements and DXA measurements.

CONCLUSIONS

We found that there was a close association between geometry and mechanical properties regardless of the imaging modality (MRI or pQCT) used.

Spatial autocorrelation and mean intercept length analysis of trabecular bone anisotropy applied to in vivo magnetic resonance imaging

Osteoporosis is characterized by bone loss and deterioration of the trabecular bone (TB) architecture that leads to impaired overall mechanical strength of the bone. Bone mineral density (BMD) measured by dual-energy x-ray absorptiometry is currently the standard clinical metric assessing bone integrity but it fails to capture the structural changes in the TB. Recent research suggests that structure contributes to bone strength in a manner complementary to BMD. Besides parameters of scale such as the mean TB thickness and mean bone volume fraction, parameters describing the anisotropy of the trabecular architecture play an important role in the characterization of TB since trabeculae are preferentially oriented along the direction of local loading. Therefore, the degree of structural anisotropy is of pivotal importance to the bone's mechanical competence. The most common method for measuring structural anisotropy of TB is the mean-intercept length (MIL). In this work we present a method, based on the three-dimensional spatial autocorrelation function (ACF), for mapping of the full structural anisotropy ellipsoid of both TB thickness and spacing and we examine its performance as compared to that of MIL. Not only is the ACF method faster by several orders of magnitude, it is also considerably more robust to noise. Further, it is applicable at lower spatial resolution and is relatively insensitive to image shading. The chief reason for ACF's superior performance is that it does not require binarization, which is difficult to achieve in the limited spatial regime of in vivo magnetic resonance imaging. MIL and ACF have been applied to high-resolution magnetic resonances images of the tibia in a group of ten healthy postmenopausal women by comparing the structural anisotropy and principal direction of the computed fabric tensor for each method. While there is fair agreement between the two methods, ACF analysis yielded greater anisotropy than MIL for both TB thickness and spacing. There was good agreement between the two techniques as far as the eigenvectors of the fabric ellipsoids were concerned, which parallel the bone's macroscopic axis.

Structural and functional assessment of trabecular and cortical bone by micro magnetic resonance imaging

Osteoporosis is a multifactorial disorder of bone mineral homeostasis affecting the elderly. It is a major public health issue with significant socioeconomic consequences. Recent findings suggest that bone loss-the key manifestation of the disease-is accompanied by architectural deterioration, both affecting the bone's mechanical competence and susceptibility to fracture. This article reviews the potential of quantitative micro MRI (mu-MRI), including a discussion of the technical requirements for image acquisition, processing, and analysis for assessing the architectural implications of osteoporosis and as a means to monitor the response to treatment. With current technology, the resolution achievable in clinically acceptable scan times and necessary signal-to-noise ratio (SNR) is comparable to trabecular thickness. This limited spatial resolution regime demands processing and analysis algorithms designed to operate under such limiting conditions. It is shown that three different classes of structural parameters can be distinguished, characterizing scale, topology, and orientation. There is considerable evidence that osteoporotic bone loss affects all three classes but that topological changes, resulting from conversion of trabecular plates to rods, with the latter's eventual disconnection, are particularly prominent. Clinical applications discussed can be divided into those dealing with assessment of osteoporotic fracture risk as opposed to the study of the effect of disease progression and regression in response to treatment. Current data suggest that noninvasive assessment of cortical and trabecular bone (TB) architecture by mu-MRI may provide new surrogate endpoints to assess the efficacy of intervention in osteoporosis treatment and prevention.

Alterations of cortical and trabecular architecture are associated with fractures in postmenopausal women, partially independent of decreased BMD measured by DXA: the OFELY study

We assessed the role of low aBMD and impaired architecture-assessed by an HR-pQCT system-in a case-control study of postmenopausal women with fractures. Vertebral and nonvertebral fractures are associated with low volumetric BMD and architectural alterations of trabecular and cortical bone, independent of aBMD assessed by DXA.

INTRODUCTION

Alterations of bone architecture and low BMD both contribute to skeletal fragility, but the contribution of cortical and trabecular architecture, independently of areal BMD (aBMD), to the risk of fracture in postmenopausal women has not been thoroughly evaluated. We assessed the role of impaired architecture and low BMD in postmenopausal women with fractures.

MATERIALS AND METHODS

A matched case-control study in women from the OFELY cohort was performed after 13 years of follow-up. One hundred one women (mean, 73.7+/-8 years) who sustained a fragility fracture during the follow-up of the study were age-matched with one control who never had a fracture. Density and architecture at the distal radius and tibia were measured with high-resolution pQCT (HR-pQCT) using an XTreme CT (Scanco Medical AG, Bassersdorf, Switzerland). aBMD at the total hip and ultradistal radius was measured by DXA.

RESULTS

There were 80 peripheral fractures in 72 women, 44 vertebral fractures in 34 women, and both types of fractures in 5 women over the 14 years of follow-up. At the distal radius, women with fractures had lower volumetric total (D tot) and trabecular (D trab) BMDs, BV/TV, cortical thickness (Cort Th), trabecular number (TbN), and trabecular thickness (TbTh) and higher trabecular separation (TbSp) and distribution of trabecular separation (TbSpSd) than controls without fractures. In a logistic model, each SD decrease of volumetric total and trabecular densities was associated with a significantly increased risk of fracture at both sites (ORs ranged from 2.00 to 2.47). After adjusting for aBMD measured by DXA at the ultradistal radius, differences between cases and controls remained significant for D trab, and there was a similar trend for TbN, TbSp, and TbSpSd, with adjusted ORs ranging from 1.32 to 1.50. At the distal tibia, before and after adjusting for total hip aBMD, differences between cases and controls remained significant for D tot, D trab, Cort Th, and TbTh, with adjusted ORs ranging from 1.80 to 2.09.

CONCLUSIONS

In postmenopausal women, vertebral and nonvertebral fractures are associated with low volumetric BMD and architectural alterations of trabecular and cortical bone that can be assessed noninvasively and that are partially independent of aBMD assessed by DXA.

Quantitative MRI for the assessment of bone structure and function

Osteoporosis is the most common degenerative disease in the elderly. It is characterized by low bone mass and structural deterioration of bone tissue, leading to morbidity and increased fracture risk in the hip, spine and wrist-all sites of predominantly trabecular bone. Bone densitometry, currently the standard methodology for diagnosis and treatment monitoring, has significant limitations in that it cannot provide information on the structural manifestations of the disease. Recent advances in imaging, in particular MRI, can now provide detailed insight into the architectural consequences of disease progression and regression in response to treatment. The focus of this review is on the emerging methodology of quantitative MRI for the assessment of structure and function of trabecular bone. During the past 10 years, various approaches have been explored for obtaining image-based quantitative information on trabecular architecture. Indirect methods that do not require resolution on the scale of individual trabeculae and therefore can be practiced at any skeletal location, make use of the induced magnetic fields in the intertrabecular space. These fields, which have their origin in the greater diamagnetism of bone relative to surrounding marrow, can be measured in various ways, most typically in the form of R2', the recoverable component of the total transverse relaxation rate. Alternatively, the trabecular network can be quantified by high-resolution MRI (micro-MRI), which requires resolution adequate to at least partially resolve individual trabeculae. Micro-MRI-based structure analysis is therefore technically demanding in terms of image acquisition and algorithms needed to extract the structural information under conditions of limited signal-to-noise ratio and resolution. Other requirements that must be met include motion correction and image registration, both critical for achieving the reproducibility needed in repeat studies. Key clinical applications targeted involve fracture risk prediction and evaluation of the effect of therapeutic intervention.

Assessment of bone mineral and matrix using backscatter electron imaging and FTIR imaging

The resistance of bone to fracture is determined by its geometric and material properties. The geometry and density can be determined by radiographic methods, but material properties such as collagen structure, mineral composition, and crystal structure currently require analysis by invasive techniques. Backscatter electron imaging provides quantitative information on the distribution of the mineral within tissue sections, and infrared and other vibrational spectroscopic methods can supplement these data, providing site-specific information on mineral content as well as information on collagen maturity and distributions of crystal size and composition. This information contributes to the knowledge of "bone quality."