Correlation between image noise and body weight in coronary CTA with 16-row MDCT

Pulmonary Vein Isolation in Obese Compared to Non-Obese Patients: Real-Life Experience from a Large Tertiary Center

1. Introduction: Pulmonary vein isolation (PVI) is an established procedure used to achieve rhythm control in atrial fibrillation (AF). In obese patients (pts), in whom AF occurs more frequently, a reduced effectiveness of PVI has been observed. Therefore, this study’s aim was to compare the long-term efficacy of PVI between obese and non-obese patients. 2. Methods: We enrolled 111 consecutive pts with a body mass index (BMI) of >30 kg/m2 undergoing PVI from our large registry. Procedural data and outcomes were compared with a matched group of 115 non-obese PVI pts and the long-term outcomes were analyzed. 3. Results: Overall follow-up duration was 314 patient-years in the obese and 378 patient-years in the non-obese group. The follow-up rate was 71% in the obese and 76% in the non-obese group. In both groups, their AF-characteristics did not differ significantly, while known risk factors were significantly more prevalent in the obese group. Procedural characteristics were similar in both groups. During follow-up, the obese pts demonstrated significant weight loss compared to the non-obese pts, while at the same time, the overall recurrence rate during follow-up did not differ significantly between both groups (obese: 39.2% and non-obese: 43.7%). PVI related and long-term complications were comparable between both groups. In the univariate analysis, obesity was not found to be associated with an increased AF recurrence risk. 4. Conclusion: These real-life data demonstrate that obese pts may not show higher AF recurrence rates after PVI compared to pts with normal body weight. Furthermore, PVI was found to be safe and effective in obese patients; thus, a BMI alone may not be a criterion for refusal of PVI.

Low-dose CT scan in stone detection for stone treatment follow-up: is there a relation between stone composition and radiation delivery? Study on a porcine-kidney model

BACKGROUND

Non-contrast CT scan (NCCT) is becoming the standard imaging modality in urinary stone disease. Radiation dose remains an issue, especially for those patients who may need to undergo several CT scans for this indication during their lifetime. Low-dose and ultra-low-dose protocols exist, but there is limited data on the relationship between the minimum radiation dose capable of detecting stone fragments and stone composition.

METHODS

Seven different kinds of human kidney stone were selected. Fragments of 1, 2, 4 and 7 mm were obtained for each stone. Four fragments of the same material were placed in a porcine kidney. A CT scan was then used to scan the kidney at decreasing dosages of 140, 70, 30, 15 and 7mAs. The scans were repeated for each type of stone. Images were reviewed by two radiologists independently with the intent of identifying the stone composition and providing information on its position, dimensions and Hounsfield units (HU).

RESULTS

All types of stone were visible at all settings. Only the 1-mm uric-acid fragment was not detected by both radiologists at 7 and 15 mAs. Dose Length product (DLP) decreased with the reduction in mAs. In terms of HU a statistically significant difference was observed between calcium-based and non-calcium-based stones. Stone dimensions and HU were not affected by the reductions in mAs.

CONCLUSIONS

Ultra-low-dose CT has a good detection rate for all kinds of stone, even when the fragment size is small. Only small uric acid fragments need higher energy settings in order to be detected. When the stone composition is known after surgery for urolithiasis, the most appropriate CT scan setting could be suggested by the urologist during their follow-up.

Effectiveness of automatic tube potential selection with tube current modulation in coronary CT angiography for obese patients: Comparison with a body mass index-based protocol using the propensity score matching method

Background

Reduced image quality from increased X-ray scatter and image noise can be problematic when coronary computed tomography angiography (CCTA) imaging is performed in obese patients. The aim of this study was to compare the image quality and radiation dose obtained using automatic tube potential selection with tube current modulation (APSCM) with those obtained using a body mass index (BMI)-based protocol for CCTA in obese patients.

Methods

A total of 203 consecutive obese (BMI > 30 kg/m²) patients were retrospectively enrolled, of whom 96 underwent CCTA with APSCM and 107 underwent a BMI-based protocol. After applying the propensity score matching method, the clinical parameters, subjective and objective image quality, and radiation dose were compared between the APSCM group and the matched BMI-based group. These parameters were also compared among different tube potential subgroups.

Results

No significant differences were observed between the APSCM group and the BMI-based group with respect to image quality or radiation dose assessment (p > 0.05). Twenty patients (21%) examined with 140 kV in the APSCM group were exposed to significantly more radiation (p < 0.05) than patients in the BMI-based group or patients in the other APSCM kV subgroups; significant improvement in image quality was not observed in the 140 kV subgroup. Patients with a high BMI and a large effective diameter tended to be examined with 140 kV (p < 0.05).

Conclusion

The use of APSCM for CCTA in obese patients did not significantly reduce the radiation dose or improve image quality compared with those in the matched BMI-based group. Our data indicate that it is better to avoid using APSCM when 140 kV is automatically selected, due to increased radiation dose and lack of significant improvement in image quality.

Performance of Half-dose Chest Computed Tomography in Lung Malignancy Using an Iterative Reconstruction Technique

Objectives The purpose of this study was to evaluate the performance of half-dose chest CT using an iterative reconstruction technique in patients with lung malignancies. Methods The Dual-source CT scans were obtained and half-dose datasets were reconstructed with 5 different strengths in 38 adults with lung malignancies. Two radiologists graded subjective image quality; noise, contrast and sharpness at the central/peripheral lung, mediastinum and chest wall of the reconstructed half-dose images, compared with those of standard-dose images, using a three-point scale. A lesion assessment; lesion conspicuity and diagnostic confidence, was also performed. The quantitative image noises; contrast-to-noise ratio (CNR) and signal-to-noise ratio (SNR) were measured and compared with those of standard-dose images. Results The subjective image noise in the half-dose images was less than that of the standard-dose images. The contrast in strengths 2 to 5 was superior, the sharpness of the lung parenchyma in strengths 3 to 5 was inferior, and the CNR/SNR in all strengths were higher than those of standard-dose images ( P &lt; 0.05). The improvement of subjective image noise and contrast, the decrease in sharpness, were correlated with strength level ( P &lt; 0.05). The lesion conspicuity in half-dose images of strengths 4 and 5 was decreased. The diagnostic confidence of the half-dose images of all strengths was comparable to that of the standard-dose images ( P &lt; 0.05). Conclusions Half-dose chest CT images using an iterative reconstruction technique show decreased image noise, increased contrast, and diagnostic confidence comparable to standard-dose images. Images reconstructed with strength 2 and 3 appear to be the optimal choice in clinical practice.

Accuracy of computed tomographic arthrography for assessment of articular cartilage defects in the ovine stifle

Articular cartilage defects are one of the features of osteoarthritis in animals and humans. Early detection of cartilage defects is a challenge in clinical veterinary practice and also in translational research studies. An accurate, diagnostic imaging method would be desirable for detecting and following up lesions in specific anatomical regions of the articular surface. The current prospective experimental study aimed to describe the accuracy of computed tomographic arthrography (CTA) for detecting cartilage defects in a common animal model used for osteoarthritis research, the ovine stifle (knee, femoropatellar/femorotibial) joint. Joints in cadaver limbs (n = 42) and in living animals under anesthesia (n = 13) were injected with a contrast medium and imaged using a standardized CT protocol. Gross anatomy and histological assessment of specific anatomic regions were used as a gold standard for the evaluation of sensitivity, specificity, negative predictive value, and positive predictive value for CTA identification of articular cartilage defects in those regions. Pooled estimated sensitivity and specificity were 90.32% and 97.30%, respectively, in cadaver limbs, and 81.82% and 95.24%, respectively, in living animals. Pooled estimated positive predictive value and negative predictive values were 98.25% and 85.71%, respectively, in cadaver limbs, and 81.82% and 95.24%, respectively, in living animals. The delineation of cartilage surface was good for anatomical regions most frequently affected by cartilage defects in the ovine stifle: medial femoral condyle, medial tibial condyle, and patella. This study supported the use of CTA as an imaging technique for detecting and monitoring articular cartilage defects in the ovine stifle joint.

A mathematical algorithm for quantification of CT image noise

Quantification of computed tomography (CT) noise helps in determination of radiation dosage requirements for adequate image quality. Clinical methods used include calculation of the standard deviation (SD) of a selected region of interest (ROI). In industry, wavelet decomposition has been used for image compression while removing high-frequency noise. We evaluated a cohort of 74 consecutive patients referred for coronary artery calcium scoring and quantitated noise within a 16×16 ROI in the ascending aorta using the traditional SD method and also using a two-dimensional dyadic wavelet decomposition method. Clinically, noise has been shown to be proportional to patient weight and also body mass index (BMI), which is a derived value from height and weight. Noise for both methods was plotted against patient parameters of height, weight, waist circumference and calculated BMI. A regression line was calculated and coefficient of determination (CoD) calculated for each. The CoD was better for height, weight, and waist circumference using the wavelet method as compared to the traditional SD method. The wavelet method of quantification of image noise may be an improved method as compared to the SD method. This method could help further refine an imaging system's determination of radiation dosage requirements to obtain a satisfactory quality image.

Predicting the image noise level of prospective ECG-triggered coronary computed tomography angiography: quantitative measurement of thoracic component versus body mass index

We evaluated the feasibility of using quantitatively measured thoracic components, as compared to body mass index (BMI), for predicting the image noise of coronary computed tomography angiography (CCTA). One hundred subjects (M:F = 64:36; mean age, 55 ± 8.8 years) who underwent prospective electrocardiography-gated CCTA and low-dose chest computed tomography (CT) were analyzed retrospectively. The image noise of the CCTA was determined by the standard deviation of the attenuation value in a region of interest on the aortic root level. On the low-dose chest CT, the areas of the thoracic components were measured at the aortic root level. An auto-segmentation technique with the following threshold levels was used: quantitatively measured area of total thorax [QMAtotal: -910 to 1000 Hounsfield units (HU)], lung (QMAlung: -910 to -200 HU), fat (QMAfat: -200 to 0 HU), muscle (QMAmuscle: 0-300 HU), soft tissue (fat + muscle, QMAsoft tissue: -200 to 300 HU), bone (QMAbone: 300-1000 HU) and solid tissue (fat + muscle + bone, QMAsolid tissue: -200 to 1000 HU). The relationship between image noise and variable biometric parameters including QMA was analyzed, and the linear correlation coefficients were used as indicators of the strength of association. Among the variable biometric parameters, including BMI, QMAsolid tissue showed the highest correlation coefficient with image noise in all subjects (r = 0.804), males (r = 0.716), females (r = 0.889), the overweight (r = 0.556), and the non-overweight subgroups (r = 0.783). QMAsolid tissue can be used as a potential surrogate predictor of the image noise level in low tube voltage CCTA.

Radiation dose reduction in chest CT--review of available options

Computed tomography currently accounts for the majority of radiation exposure related to medical imaging. Although technological improvement of CT scanners has reduced the radiation dose of individual examinations, the benefit was overshadowed by the rapid increase in the number of CT examinations. Radiation exposure from CT examination should be kept as low as reasonably possible for patient safety. Measures to avoid inappropriate CT examinations are needed. Principles and information on radiation dose reduction in chest CT are reviewed in this article. The reduction of tube current and tube potential are the mainstays of dose reduction methods. Study results indicate that routine protocols with reduced tube current are feasible with diagnostic results comparable to conventional standard dose protocols. Tube current adjustment is facilitated by the advent of automatic tube current modulation systems by setting the appropriate image quality level for the purpose of the examination. Tube potential reduction is an effective method for CT pulmonary angiography. Tube potential reduction often requires higher tube current for satisfactory image quality, but may still contribute to significant radiation dose reduction. Use of lower tube potential also has considerable advantage for smaller patients. Improvement in image production, especially the introduction of iterative reconstruction methods, is expected to lower radiation dose significantly. Radiation dose reduction in CT is a multifaceted issue. Understanding these aspects leads to an optimal solution for various indications of chest CT.

Low-dose CT for quantitative analysis in acute respiratory distress syndrome

INTRODUCTION

The clinical use of serial quantitative computed tomography (CT) to characterize lung disease and guide the optimization of mechanical ventilation in patients with acute respiratory distress syndrome (ARDS) is limited by the risk of cumulative radiation exposure and by the difficulties and risks related to transferring patients to the CT room. We evaluated the effects of tube current-time product (mAs) variations on quantitative results in healthy lungs and in experimental ARDS in order to support the use of low-dose CT for quantitative analysis.

METHODS

In 14 sheep chest CT was performed at baseline and after the induction of ARDS via intravenous oleic acid injection. For each CT session, two consecutive scans were obtained applying two different mAs: 60 mAs was paired with 140, 15 or 7.5 mAs. All other CT parameters were kept unaltered (tube voltage 120 kVp, collimation 32 × 0.5 mm, pitch 0.85, matrix 512 × 512, pixel size 0.625 × 0.625 mm). Quantitative results obtained at different mAs were compared via Bland-Altman analysis.

RESULTS

Good agreement was observed between 60 mAs and 140 mAs and between 60 mAs and 15 mAs (all biases less than 1%). A further reduction of mAs to 7.5 mAs caused an increase in the bias of poorly aerated and nonaerated tissue (-2.9% and 2.4%, respectively) and determined a significant widening of the limits of agreement for the same compartments (-10.5% to 4.8% for poorly aerated tissue and -5.9% to 10.8% for nonaerated tissue). Estimated mean effective dose at 140, 60, 15 and 7.5 mAs corresponded to 17.8, 7.4, 2.0 and 0.9 mSv, respectively. Image noise of scans performed at 140, 60, 15 and 7.5 mAs corresponded to 10, 16, 38 and 74 Hounsfield units, respectively.

CONCLUSIONS

A reduction of effective dose up to 70% has been achieved with minimal effects on lung quantitative results. Low-dose computed tomography provides accurate quantitative results and could be used to characterize lung compartment distribution and possibly monitor time-course of ARDS with a lower risk of exposure to ionizing radiation. A further radiation dose reduction is associated with lower accuracy in quantitative results.

Image quality of low-dose CCTA in obese patients: impact of high-definition computed tomography and adaptive statistical iterative reconstruction

The accuracy of coronary computed tomography angiography (CCTA) in obese persons is compromised by increased image noise. We investigated CCTA image quality acquired on a high-definition 64-slice CT scanner using modern adaptive statistical iterative reconstruction (ASIR). Seventy overweight and obese patients (24 males; mean age 57 years, mean body mass index 33 kg/m(2)) were studied with clinically-indicated contrast enhanced CCTA. Thirty-five patients underwent a standard definition protocol with filtered backprojection reconstruction (SD-FBP) while 35 patients matched for gender, age, body mass index and coronary artery calcifications underwent a novel high definition protocol with ASIR (HD-ASIR). Segment by segment image quality was assessed using a four-point scale (1 = excellent, 2 = good, 3 = moderate, 4 = non-diagnostic) and revealed better scores for HD-ASIR compared to SD-FBP (1.5 ± 0.43 vs. 1.8 ± 0.48; p < 0.05). The smallest detectable vessel diameter was also improved, 1.0 ± 0.5 mm for HD-ASIR as compared to 1.4 ± 0.4 mm for SD-FBP (p < 0.001). Average vessel attenuation was higher for HD-ASIR (388.3 ± 109.6 versus 350.6 ± 90.3 Hounsfield Units, HU; p < 0.05), while image noise, signal-to-noise ratio and contrast-to noise ratio did not differ significantly between reconstruction protocols (p = NS). The estimated effective radiation doses were similar, 2.3 ± 0.1 and 2.5 ± 0.1 mSv (HD-ASIR vs. SD-ASIR respectively). Compared to a standard definition backprojection protocol (SD-FBP), a newer high definition scan protocol in combination with ASIR (HD-ASIR) incrementally improved image quality and visualization of distal coronary artery segments in overweight and obese individuals, without increasing image noise and radiation dose.

A systematic review of radiation dose associated with different generations of multidetector CT coronary angiography

The purpose of this paper is to perform a systematic review on radiation dose reduction in coronary computed tomography (CT) angiography that is done using different generations of multidetector CT (MDCT) scanners ranging from four-slice to 320-slice CTs, and have different dose-saving techniques. The method followed was to search for references on coronary CT angiography (CTA) that had been published in English between 1998 and February 2011. The effective radiation dose reported in each study based on different generations of MDCT scanners was analysed and compared between the types of scanners, gender, exposure factors and scanning protocols. Sixty-six studies were eligible for inclusion in this analysis. The mean effective dose (ED) for MDCT angiography with retrospective electrocardiogram (ECG) gating without use of any dose-saving protocol was 6.0 ± 2.8, 10.4 ± 4.90 and 11.8 ± 5.9 mSv for four-slice, 16-slice and 64-slice CTs, respectively. More dose-saving strategies were applied in recent CT generations including prospective ECG-gating protocols, application of lower tube voltage and tube current modulation to achieve a noteworthy dose reduction. Prospective ECG-gating protocol was increasingly used in 64, 125, 256 and 320 slices with corresponding ED of 4.1 ± 1.7, 3.6 ± 0.4, 3.0 ± 1.9 and 7.6 ± 1.6 mSv, respectively. Lower tube voltage and tube current modulation were widely applied in 64-slice CT and resulted in significant dose reduction (P < 0.05). This analysis has shown that dose-saving strategies can substantially reduce the radiation dose in CT coronary angiography. The fact that more and more clinicians are opting for dose-saving strategies in CT coronary angiography indicates an increased awareness of risks associated with high radiation doses among them.

Use of BMI guidelines and individual dose tracking to minimize radiation exposure from low-dose helical chest CT scanning in a lung cancer screening program

RATIONALE AND OBJECTIVES

The increasing use of computed tomography (CT) has been accompanied by rising concerns over potential radiation-related health risks, especially cancer, and a need to minimize such risks.

MATERIALS AND METHODS

We conducted 2186 low-dose helical chest CT scans among 1235 nuclear weapons workers at elevated risk of lung cancer, setting the CT scanner tube current at 30 mAs for all participants with BMI <35 kg/m(2) and permitting technologists to raise mAs levels for participants with BMI ≥35 kg/m(2). Dose-length product (DLP) was recorded from the CT scanner, permitting calculation of effective dose. Phantom-based estimates of effective dose were also made. A chest radiologist recorded acceptability of image quality.

RESULTS

The study population was significantly overweight: 79% exceeded a body mass index (BMI) >25 kg/m(2) and 37.1% exceeded a BMI ≥30 kg/m(2). Nearly 90% of CT scans were performed using a tube current setting of 30 mAs and had a mean DLP-based effective dose of 1.3 mSv. The phantom-based estimate of effective dose was lower at 1.1 mSv. Among participants with a BMI ≥35 kg/m(2), 92% were scanned at 40 or 50 mAs, which was associated with a DLP-based effective dose of 1.6 and 2.0 mSv, respectively. Image quality was satisfactory in 99.8% of scans.

CONCLUSION

Application of simple BMI-based guidelines and DLP tracking of low-dose helical chest CT scans in a lung cancer screening program minimizes radiation dose, even in a largely overweight population.

3D automatic exposure control for 64-detector row CT: radiation dose reduction in chest phantom study

PURPOSE

The purpose of this study was to determine the utility of three-dimensional (3D) automatic exposure control (AEC) for low-dose CT examination in a chest phantom study.

MATERIALS AND METHODS

A chest CT phantom including simulated focal ground-glass opacities (GGOs) and nodules was scanned with a 64-detector row CT with and without AEC. Performance of 3D AEC included changing targeted standard deviations (SDs) of image noise from scout view. To determine the appropriate targeted SD number for identification, the capability of overall identification with the CT protocol adapted to each of the targeted SDs was compared with that obtained with CT without AEC by means of receiver operating characteristic analysis.

RESULTS

When targeted SD values equal to or higher than 250 were used, areas under the curve (Azs) of nodule identification with CT protocol using AEC were significantly smaller than that for CT protocol without AEC (p < 0.05). When targeted SD numbers at equal to or more than 180 were adapted, Azs of CT protocol with AEC had significantly smaller than that without AEC (p < 0.05).

CONCLUSION

This phantom study shows 3D AEC is useful for low-dose lung CT examination, and can reduce the radiation dose while maintaining good identification capability and good image quality.

Limited clinical utility of CT coronary angiography in a district hospital setting

BACKGROUND

Studies have demonstrated considerable accuracy of multi-slice CT coronary angiography (MSCT-CA) in comparison to invasive coronary angiography (I-CA) for evaluating coronary artery disease (CAD). The extent to which published MSCT-CA accuracy parameters are transferable to routine practice beyond high-volume tertiary centres is unknown.

AIM

To determine the accuracy of MSCT-CA for the detection of CAD in a Scottish district general hospital.

DESIGN

Prospective study of diagnostic accuracy.

METHOD

One hundred patients with suspected CAD recruited from two Glasgow hospitals underwent both MSCT-CA (Philips Brilliance 40 × 0.625 collimation, 50-200 ms temporal resolution) and I-CA. Studies were reported by independent, blinded radiologists and cardiologists and compared using the AHA 15-segment model.

RESULTS

Of 100 patients [55 male, 45 female, mean (SD) age 58.0 (10.7) years], 59 and 41% had low-intermediate and high pre-test probabilities of significant CAD, respectively. Mean (SD) heart rate during MSCT-CA was 68.8 (9.0) bpm. Fifty-seven per cent of patients had coronary artery calcification and 35% were obese. Patient prevalence of CAD was 38%. Per-patient sensitivity, specificity, positive and negative (NPV) predictive values for MSCT-CA were 92.1, 47.5, 52.2 and 90.6%, respectively. NPV was reduced to 75.0% in the high pre-test probability group. Specificity was compromised in patients with sub-optimally controlled heart rates, calcified arteries and elevated BMI.

CONCLUSION

Forty-Slice MSCT-CA has a high NPV for ruling out significant CAD when performed in a district hospital setting in patients with low-intermediate pre-test probability and minimal arterial calcification. Specificity is compromised by clinically appropriate strategies for dealing with unevaluable studies. Effective heart rate control during MSCT-CA is imperative. National guidelines should be utilized to govern patient selection and direct MSCT-CA reporter training to ensure quality control.

Patient preparation and scanning techniques

Cardiac computed tomographic angiography (CCTA) is a unique diagnostic modality that can provide a comprehensive assessment of cardiac anatomy. Rapid advances in scanner and software technology have resulted in the ability to noninvasively image the coronary arteries. However, careful patient preparation and scanning technique is required to ensure optimal image quality while minimizing radiation dose delivered. Important components of patient preparation include knowledge of the indications and contraindications for CCTA, patient screening, patient premedication, patient positioning, prescan instruction, and electrocardiograph lead placement. Scanning technique should be determined on a patient by patient basis and tailored according to age and radiation risk, body mass index and chest circumference, heart rate and variability, presence of stents, and coronary calcification.

Quantitative assessment of image quality in 64-slice-computed tomography of coronary arteries in subjects undergoing screening for coronary artery disease

Accurate and consistent visualization of the entire coronary system with high-grade imaging quality is crucial for routine applications of multi-detector-computed tomography (MDCT) coronary angiography. To determine the imaging quality of 64-slice-MDCT coronary angiography, we respectively explored the quantitative parameters of imaging quality in 105 consecutive subjects (71 men, 34 women; aged 58.66 +/- 10.62 years) who underwent 64-slice-MDCT coronary angiography to screen for coronary disease. The interobserver agreement for semi-quantitative image quality, visible length, signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) of the coronary arteries was good. The SNR and CNR of the proximal segments of the coronary arteries were superior to that of the distal segments of coronary arteries (p < 0.001). The visible length of the stenosed right coronary artery was significantly shorter than that of the non-stenosed right coronary artery (p = 0.03). The SNR and CNR of the stenosed and non-stenosed coronary arteries revealed no significant difference (p > 0.05). Body weight and body mass index were inversely related to the SNR and CNR of the aorta (p < 0.001). In conclusion, 64-slice-MDCT coronary angiography can provide excellent imaging quality of coronary arteries in subjects undergoing screening for coronary disease, although the SNR and CNR were relatively low at the distal segments of coronary arteries.

Patient characteristics as predictors of image quality and diagnostic accuracy of MDCT compared with conventional coronary angiography for detecting coronary artery stenoses: CORE-64 Multicenter International Trial

OBJECTIVE

The purpose of the study was to investigate patient characteristics associated with image quality and their impact on the diagnostic accuracy of MDCT for the detection of coronary artery stenosis.

MATERIALS AND METHODS

Two hundred ninety-one patients with a coronary artery calcification (CAC) score of <or=600 Agatston units (214 men and 77 women; mean age, 59.3+/-10.0 years [SD]) were analyzed. An overall image quality score was derived using an ordinal scale. The accuracy of quantitative MDCT to detect significant (>or=50%) stenoses was assessed using quantitative coronary angiography (QCA) per patient and per vessel using a modified 19-segment model. The effect of CAC, obesity, heart rate, and heart rate variability on image quality and accuracy were evaluated by multiple logistic regression. Image quality and accuracy were further analyzed in subgroups of significant predictor variables. Diagnostic analysis was determined for image quality strata using receiver operating characteristic (ROC) curves.

RESULTS

Increasing body mass index (BMI) (odds ratio [OR]=0.89, p<0.001), increasing heart rate (OR=0.90, p<0.001), and the presence of breathing artifact (OR=4.97, p<or=0.001) were associated with poorer image quality whereas sex, CAC score, and heart rate variability were not. Compared with examinations of white patients, studies of black patients had significantly poorer image quality (OR=0.58, p=0.04). At a vessel level, CAC score (10 Agatston units) (OR=1.03, p=0.012) and patient age (OR=1.02, p=0.04) were significantly associated with the diagnostic accuracy of quantitative MDCT compared with QCA. A trend was observed in differences in the areas under the ROC curves across image quality strata at the vessel level (p=0.08).

CONCLUSION

Image quality is significantly associated with patient ethnicity, BMI, mean scan heart rate, and the presence of breathing artifact but not with CAC score at a patient level. At a vessel level, CAC score and age were associated with reduced diagnostic accuracy.

Optimization of tube current in coronary multidetector computed tomography angiography: assessment of a standardized method to individualize current selection based on body habitus

This study sought to extract information on individual patient habitus from scout imaging and to correlate radiograph tube current settings with enhancement of the coronaries as a function of patient profiles for coronary multidetector computed tomography.

MATERIALS AND METHODS

Fifty patients underwent coronary 64-slice multidetector computed tomography consisting of 2-plane scouts and electrocardiography-gated coronary studies at 64 x 0.625 mm, radiograph voltage of 120 kVp, and radiograph currents of 295 to 788 mA, which were reconstructed during 65%, 75%, and 85% R-R intervals. Patients' weight was recorded. On scout imaging, chest diameters were determined, and circumferences were calculated. To determine whether body weight showed sex-specific characteristics, t test was used. Pearson correlation determined whether cross-sectional measurements reflected female/male body habitus. On coronary imaging, contrast-to-noise ratios (CNRs) of the aorta and the coronaries were calculated. To assess whether CNRs differed throughout the diastolic phase, t test was used. Data triplets of CNRs and the corresponding current and circumference were plotted; CNRs less than 250 Hounsfield unit (HU) were discarded, dissecting lines as 95th percentiles correlating radiograph currents and patients' circumferences were calculated.

RESULTS

Female/male weights differed significantly (P = 0.0006); circumferences based on scouts adequately reflected body weight (coefficients, 0.86 male/0.87 female). Homogenous vascular enhancement of the aorta (mean +/- SD, 344.4 +/- 81.8 HU) and the right (292.3 +/- 82.8 HU) and left (285.8 +/- 81.3 HU) coronaries was achieved (P > 0.005). Ninety-fifth percentile cutoffs identified linear relationships between patient's circumference and the minimal adequate radiograph current achieving CNR less than or equal to 250 HU.

CONCLUSION

Scout imaging can be used to determine individual patient habitus; habitus-adjusted minimal radiograph tube current cutoff levels identified in this study ensuring clinically required levels of coronary enhancement can be used for future coronary CT angiography optimization of tube current based on scout imaging.

Dual-source computed tomography: estimation of radiation exposure of ECG-gated and ECG-triggered coronary angiography

PURPOSE

The aim of the study was to estimate radiation exposure of coronary calcium scoring and angiography using ECG-gated and ECG-triggered dual-source computed tomography.

MATERIALS AND METHODS

An Alderson Rando phantom equipped with thermoluminescent dosimeters was used for all dose measurements. Effective dose was calculated according to ICRP 103. Radiation exposure was performed on a dual-source computed tomography (DSCT) scanner with standard protocols for calcium scoring (DSCT-Ca) and coronary angiography (DSCTA) at different heart rates (40-100 beats/min). Furthermore, a scanning protocol with ECG-triggering as well as a standard chest CT scan were evaluated.

RESULTS

Depending on gender, heart rate and ECG-pulsing, the effective dose of a complete cardiac DSCT (DSCT-Ca and DSCTA) scan varies from 10.2 to 32.6mSv. The effective radiation dose increased significantly with lower heart rates (p<0.035). ECG-pulsing reduced the radiation exposure significantly in DSCTA (p<0.001). Due to breast tissue in the primary scan range, females' doses showed an increase up to 69.9% compared to males in scan protocols without ECG-pulsing. Prospective ECG-triggered DSCTA resulted in estimated effective doses from 2.8mSv (males) to 4.1mSv (females).

CONCLUSION

The ECG-pulsing technique has proven its effectiveness to reduce effective dose in coronary CT angiography and is recommended for all patients with regular heart rates. The patient's heart rate influences the radiation exposure with a significant decrease at higher heart rates. Due to its lower dose, ECG-triggered DSCTA should be implemented for special indications, i.e. for diagnosis of pathologies of the aortic root and the ascending aorta.

Radiation dose reduction in chest CT: a review

OBJECTIVE

This article aims to summarize the available data on reducing radiation dose exposure in routine chest CT protocols. First, the general aspects of radiation dose in CT and radiation risk are discussed, followed by the effect of changing parameters on image quality. Finally, the results of previous radiation dose reduction studies are reviewed, and important information contributing to radiation dose reduction will be shared.

CONCLUSION

A variety of methods and techniques for radiation dose reduction should be used to ensure that radiation exposure is kept as low as is reasonably achievable.

Diagnostic value of 64-slice CT angiography in coronary artery disease: a systematic review

PURPOSE

To perform a systematic review of the diagnostic value of 64-multislice CT (MSCT) angiography in the detection of coronary artery disease (CAD) when compared to conventional coronary angiography.

MATERIALS AND METHODS

A search of PUBMED and MEDLINE databases for English literature was performed. Only studies with at least 10 patients comparing 64-slice MSCT angiography with conventional coronary angiography in the detection of CAD were included. Diagnostic value of MSCT angiography compared to coronary angiography was compared and analysed at segment-, vessel- and patient-based assessment.

RESULTS

Fifteen studies met selection criteria and were included for analysis. Pooled sensitivity, specificity, positive predictive value and negative predictive value as well as 95% confidence interval (CI) were 97% (94 and 99%), 88% (79 and 97%), 94% (91 and 97%), and 95% (90 and 99%) for patient-based assessment; 92% (85 and 99%), 92% (85 and 99%), 78% (66 and 91%) and 98% (96 and 99%) for vessel-based assessment; 90% (85 and 94%), 96% (95 and 97%), 75%(68 and 82%) and 98% (98 and 99%) for segment-based assessment, respectively. No significant difference was found in the diagnostic accuracy of 64-slice CT in the detection of CAD when comparison was performed either among four main coronary arteries, or between proximal and middle or distal segments (p>0.05).

CONCLUSION

Our results showed that 64-slice CT angiography has a high-diagnostic value in the detection of CAD. Severe coronary artery calcification seems to be the major factor affecting the visualisation and assessment.

Multislice CT angiography in aortic stent grafting: Relationship between image noise and body mass index

PURPOSE

To investigate the correlation between image noise and body mass index (BMI) in multislice CT angiography (MSCT) for patients with abdominal aortic aneurysm (AAA) treated with endovascular stent grafts.

MATERIALS AND METHODS

Seventeen patients who underwent MSCT following endovascular repair of AAA were included in the study. Image noise (standard deviation of the CT attenuation: S.D.) and signal to noise ratio (SNR) were plotted against BMI to demonstrate the correlation using a linear regression method. Image quality of 3D reconstructions was correlated to the SNR and BMI.

RESULTS

The r-value of linear regression between S.D. and BMI was 0.578 (p<0.05), 0.835 and 0.802 (p<0.001), respectively, at the level of renal artery, aortic aneurysm and common iliac artery. The r-value of linear regression between SNR and BMI was 0.332, 0.516 and 0.552 (p<0.05), respectively, at above three levels. Image quality of 3D reconstructions was compromised in five patients and diagnosis was affected in two patients with BMI more than 30.

CONCLUSION

A significant correlation was observed between image noise and BMI in MSCT angiography of endovascular repair of AAA. Our findings are valuable for optimisation of MSCT angiography scanning protocols and reduction of radiation dose in MSCT examinations.