Preparation and properties of macroporous brushite bone cements

Chemical, structural and cytotoxicity characterisation of experimental fluoride-doped calcium phosphates as promising remineralising materials for dental applications

OBJECTIVES

This study aimed at evaluating the cytotoxicity, chemical and structural properties of experimental fluoride-doped calcium-phosphates as potential remineralising materials for dental applications.

METHODS

Experimental calcium phosphates were formulated using β-tricalcium phosphate, monocalcium phosphate monohydrate, calcium hydroxide, and different concentrations of calcium/sodium fluoride salts [(5 wt%: VSG5F), (10 wt%: VSG10F), (20 wt%: VSG20F)]. A fluoride-free calcium phosphate (VSG) was used as control. Each tested material was immersed in simulated body fluid (SBF), (24 h, 15 and 30 days) to assess their ability to crystallise into apatite-like. Cumulative fluoride release was assayed up to 45 days. Moreover, each powder was placed into a medium containing human dental pulp stem cells (200 mg/mL) and their cytotoxicity was analysed using the 3-(4,5-dimethylthiazol-2-yl)- 2,5-diphenyltetrazolium bromide (MTT) assay (24 h, 48 h and 72 h incubation). These latter results were statistically analysed by ANOVA and Tukey's test (α = 0.05).

RESULTS

All the experimental VSG-F materials produced fluoride-containing apatite-like crystals after SBF immersion. VSG20F presented prolonged release of fluoride ions into the storage media (45d). VSG, VSG10F and VSG20F showed a significant cytotoxicity at dilution of 1:1, while at 1:5, only VSG and VSG20F demonstrated a reduction in cell viability. At lower dilutions (1:10, 1:50 and 1:100) all specimens showed no significant toxicity to hDPSCs, but an increase in cell proliferation.

SIGNIFICANCE

The experimental fluoride-doped calcium-phosphates are biocompatible and possess a clear ability to evoke fluoride-containing apatite-like crystallisation. Hence, they may be promising remineralising materials for dental applications.

The role of new zinc incorporated monetite cements on osteogenic differentiation of human mesenchymal stem cells

β-Tricalcium phosphate particles were sintered in the presence of different amounts (0-0.72mol) of zinc oxide (ZnO) to prepare zinc doped β-TCP (Znβ-TCP) particles for further use in novel monetite (DCPA: CaHPO₄) zinc incorporated bone cements with osteogenic differentiation potential towards human mesenchymal stem cells (hMSCs). XRD analysis of zinc incorporated cements prepared with β-TCP reagent particles doped with different amount of ZnO (i.e. 0.03, 0.09 and 0.18mol ZnO) revealed the presence of unreacted Znβ-TCP and monetite. Furthermore, it was shown that zinc ions preferentially occupied the β-TCP crystal lattice rather than the monetite one. Release experiments indicated a burst release of ions from the different fabricated cements during the first 24h of immersion with zinc concentrations ranging between 85 and 100% of the total concentration released over a period of 21days. Cell proliferation significantly increased (P<0.05) on zinc incorporated monetite respect to control samples (Zinc-free cement) at 7 and 14days post seeding. The expression of Runx-2 was significantly up regulated (P<0.05) in the case of cells seeded on monetite prepared with β-TCP doped with 0.03 moles of ZnO. On the other hand, the cell mineralization as well as the expression of osteogenic marker genes ALP and OSC decreased significantly (P<0.05) at 14days post cell seeding. In conclusion, these results suggest that the zinc ions released from the cements during the first 24h of culture played a critical role in regulating the osteogenic differentiation of hMSCs.

Molecular level interactions in brushite-aminoacids composites

The interaction of aminoacids (Glycine, Proline, Lysine) with brushite based bone cements has been investigated by several techniques (FTIR spectroscopy, Thermogravimetry-TG, Scanning Electron Microscopy-SEM, mechanical properties studies), with the aim to elucidate the properties of the resulting composite materials and the interaction occurring at molecular level between the inorganic matrix and the organic moieties. Brushite phase is predominantly obtained also in the presence of aminoacids added during preparation of the bone cement. Focusing on Glycine incorporation, the presence of a fraction of bulk Glycine, weakly interacting with the inorganic matrix, together with Glycine specifically interacting with adsorption sites can be envisaged, as pointed out by FT IR and thermogravimetric data. In detail, FT-IR data evidenced changes in shape and position of bands associated to stretching modes of the carboxylic groups in Glycine structure, which can be explained by the coordination of these functional groups with the Ca ions in the matrix. Heating this composite at controlled temperature results in the detection of a condensation products, either cyclic condensation product, either dipeptide. Diffuse and not specific H-bonding seems to be the main form of interaction of Proline and Lysine with brushite. Due to the coordination with Ca ions here described, Glycine can act as retardant during brushite preparation, allowing good workability of the resulting composite.

Magnesium Phosphate Cement Systems for Hard Tissue Applications: A Review

In the search for more ideal bone graft materials for clinical application, the investigation into ceramic bone cements or bone void filler is ongoing. Calcium phosphate-based materials have been widely explored and implemented for medical use in bone defect repair. Such materials are an excellent choice because the implant mimics the natural chemistry of mineralized bone matrix and in injectable cement form, can be implemented with relative ease. However, of the available calcium phosphate cements, none fully meet the ideal standard, displaying low strengths and acidic setting reactions or slow setting times, and are often very slow to resorb in vivo. The study of magnesium phosphates for bone cements is a relatively new field compared to traditional calcium phosphate bone cements. Although reports are more limited, preliminary studies have shown that magnesium phosphate cements (MPC) may be a strong alternative to calcium phosphates for certain applications. The goal of the present publication is to review the history and achievements of magnesium phosphate-based cements or bone void fillers to date, assess how these cements compare with calcium phosphate competitors and to analyze the future directions and outlook for the research, development, and clinical implementation of these cements.

Di-Calcium Phosphate and Phytosphingosine as an Innovative Acid-Resistant Treatment to Occlude Dentine Tubules

The present investigation evaluated the ability of an experimental di-calcium phosphate (DCP) desensitising agent used alone or combined with phytosphingosine (PHS) to occlude dentine tubules and resist a citric acid (CA) or artificial saliva (AS) challenge. Three groups of human dentine specimens (DS) were treated with the following: (1) PHS alone, (2) DCP or (3) a combination of PHS and DCP. Dentine hydraulic conductance of DS was evaluated using a digital flow sensor at 6.9 kPa. The average fluid volume for each of the treated DS was used to calculate the total dentine permeability reduction (%P) prior to and following CA immersion for 1 min or AS immersion for 4 weeks. The treated DS were subjected to both scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy analysis. Statistically significant differences (%P) were identified between the groups by ANOVA and Fisher's multiple comparison test (p < 0.05), respectively. Interestingly, both PHS and DCP appeared to work synergistically. DS treated with DCP or PHS/DCP demonstrated a significant reduction (%P) prior to and following CA or AS challenge (p < 0.05). Both the SEM and FTIR analyses showed consistent brushite crystals occluding the dentine tubules. Conversely, the application of PHS alone failed to demonstrate any significant reduction of dentine permeability (p > 0.05) or show any evidence of occlusion of the dentine tubules. DCP can be used alone or combined with PHS to decrease the dentine permeability as well as to resist a CA and AS challenge. These results would, therefore, suggest that DCP may be a suitable treatment option for dentine hypersensitivity.

Adsorption of malathion on mesoporous monetite obtained by mechanochemical treatment of brushite

Synthesis of mesoporous monetite by mechanochemical treatment brushite.

Brushite foams--the effect of Tween® 80 and Pluronic® F-127 on foam porosity and mechanical properties

Resorbable calcium phosphate based bone void fillers should work as temporary templates for new bone formation. The incorporation of macropores with sizes of 100 -300 µm has been shown to increase the resorption rate of the implant and speed up bone ingrowth. In this work, macroporous brushite cements were fabricated through foaming of the cement paste, using two different synthetic surfactants, Tween® 80 and Pluronic® F-127. The macropores formed in the Pluronic samples were both smaller and less homogeneously distributed compared with the pores formed in the Tween samples. The porosity and compressive strength (CS) were comparable to previously developed hydroxyapatite foams. The cement foam containing Tween, 0.5M citric acid in the liquid, 1 mass% of disodium dihydrogen pyrophosphate mixed in the powder and a liquid to powder ratio of 0.43 mL/g, showed the highest porosity values (76% total and 56% macroporosity), while the CS was >1 MPa, that is, the hardened cement could be handled without rupture of the foamed structure. The investigated brushite foams show potential for future clinical use, both as bone void fillers and as scaffolds for in vitro bone regeneration.

Biodegradable Materials for Bone Repair and Tissue Engineering Applications

This review discusses and summarizes the recent developments and advances in the use of biodegradable materials for bone repair purposes. The choice between using degradable and non-degradable devices for orthopedic and maxillofacial applications must be carefully weighed. Traditional biodegradable devices for osteosynthesis have been successful in low or mild load bearing applications. However, continuing research and recent developments in the field of material science has resulted in development of biomaterials with improved strength and mechanical properties. For this purpose, biodegradable materials, including polymers, ceramics and magnesium alloys have attracted much attention for osteologic repair and applications. The next generation of biodegradable materials would benefit from recent knowledge gained regarding cell material interactions, with better control of interfacing between the material and the surrounding bone tissue. The next generations of biodegradable materials for bone repair and regeneration applications require better control of interfacing between the material and the surrounding bone tissue. Also, the mechanical properties and degradation/resorption profiles of these materials require further improvement to broaden their use and achieve better clinical results.

Reinforcement Strategies for Load-Bearing Calcium Phosphate Biocements

Calcium phosphate biocements based on calcium phosphate chemistry are well-established biomaterials for the repair of non-load bearing bone defects due to the brittle nature and low flexural strength of such cements. This article features reinforcement strategies of biocements based on various intrinsic or extrinsic material modifications to improve their strength and toughness. Altering particle size distribution in conjunction with using liquefiers reduces the amount of cement liquid necessary for cement paste preparation. This in turn decreases cement porosity and increases the mechanical performance, but does not change the brittle nature of the cements. The use of fibers may lead to a reinforcement of the matrix with a toughness increase of up to two orders of magnitude, but restricts at the same time cement injection for minimal invasive application techniques. A novel promising approach is the concept of dual-setting cements, in which a second hydrogel phase is simultaneously formed during setting, leading to more ductile cement–hydrogel composites with largely unaffected application properties.

Strontium modified calcium phosphate cements – approaches towards targeted stimulation of bone turnover

Strontium modified calcium phosphate cements can target local bone turnover by stimulating osteoblast proliferation and differentiation (1) as well as bone mineralisation (2), reducing osteoclastogenesis (3) and resorption activity, increase osteoclast apoptosis (4) and affect osteoblast/osteoclast paracrine signalling (5).

In vitro osteoinductive potential of porous monetite for bone tissue engineering

Tissue engineering-based bone grafts are emerging as a viable alternative treatment modality to repair and regenerate tissues damaged as a result of disease or injury. The choice of the biomaterial component is a critical determinant of the success of the graft or scaffold; essentially, it must induce and allow native tissue integration, and most importantly mimic the hierarchical structure of the native bone. Calcium phosphate bioceramics are widely used in orthopaedics and dentistry applications due to their similarity to bone mineral and their ability to induce a favourable biological response. One such material is monetite, which is biocompatible, osteoconductive and has the ability to be resorbed under physiological conditions. The osteoinductive properties of monetite in vivo are known; however, little is known of the direct effect on osteoinduction of human mesenchymal stem cells in vitro. In this study, we evaluated the potential of monetite to induce and sustain human mesenchymal stem cells towards osteogenic differentiation. Human mesenchymal stem cells were seeded on the monetite scaffold in the absence of differentiating factors for up to 28 days. The gene expression profile of bone-specific markers in cells on monetite scaffold was compared to the control material hydroxyapatite. At day 14, we observed a marked increase in alkaline phosphatase, osteocalcin and osteonectin expressions. This study provides evidence of a suitable material that has potential properties to be used as a tissue engineering scaffold.

Calcium phosphate cements for bone substitution: chemistry, handling and mechanical properties

Since their initial formulation in the 1980s, calcium phosphate cements (CPCs) have been increasingly used as bone substitutes. This article provides an overview on the chemistry, kinetics of setting and handling properties (setting time, cohesion and injectability) of CPCs for bone substitution, with a focus on their mechanical properties. Many processing parameters, such as particle size, composition of cement reactants and additives, can be adjusted to control the setting process of CPCs, concomitantly influencing their handling and mechanical performance. Moreover, this review shows that, although the mechanical strength of CPCs is generally low, it is not a critical issue for their application for bone repair--an observation not often realized by researchers and clinicians. CPCs with compressive strengths comparable to those of cortical bones can be produced through densification and/or homogenization of the cement matrix. The real limitation for CPCs appears to be their low fracture toughness and poor mechanical reliability (Weibull modulus), which have so far been only rarely studied.

Self-setting calcium orthophosphate formulations

In early 1980s, researchers discovered self-setting calcium orthophosphate cements, which are bioactive and biodegradable grafting bioceramics in the form of a powder and a liquid. After mixing, both phases form pastes, which set and harden forming either a non-stoichiometric calcium deficient hydroxyapatite or brushite. Since both of them are remarkably biocompartible, bioresorbable and osteoconductive, self-setting calcium orthophosphate formulations appear to be promising bioceramics for bone grafting. Furthermore, such formulations possess excellent molding capabilities, easy manipulation and nearly perfect adaptation to the complex shapes of bone defects, followed by gradual bioresorption and new bone formation. In addition, reinforced formulations have been introduced, which might be described as calcium orthophosphate concretes. The discovery of self-setting properties opened up a new era in the medical application of calcium orthophosphates and many commercial trademarks have been introduced as a result. Currently such formulations are widely used as synthetic bone grafts, with several advantages, such as pourability and injectability. Moreover, their low-temperature setting reactions and intrinsic porosity allow loading by drugs, biomolecules and even cells for tissue engineering purposes. In this review, an insight into the self-setting calcium orthophosphate formulations, as excellent bioceramics suitable for both dental and bone grafting applications, has been provided.

A platelet derived growth factor delivery system for bone regeneration

platelet derived growth factor (PDGF) was formulated in a calcium phosphate/biodegradable polymer system for local and controlled delivery to enhance bone regeneration. Implants with a porosity of 67 %, composed of hydroxyapatite, PLGA microspheres and Pluronic(®), were obtained by compression. An increase in porosity with time was expected due to Pluronic(®) dissolution and PLGA microsphere degradation. In vivo PDGF release and tissue distribution were monitored after system implantation into femurs of rabbits using (125)I-PDGF. Most of the PDGF was released within approximately 5 days and remained located around the implantation site with negligible systemic exposure. Compared with the reference groups, an important enhancement of bone regeneration was found with doses of 600 and 1,200 ng of PDGF, although no histological differences were observed between the two doses. In conclusion, the elaborated system exhibited good biocompatibility and offered a physiologically relevant PDGF profile that enhances bone formation compared to the non-treated bone defect.

Calcium orthophosphate-based bone cements (CPCs): Applications, antibiotic release and alternatives to antibiotics

Calcium orthophosphate bone cements (CPCs) are widely used in orthopedic surgery. Implants are highly susceptible to infection and often lead to the formation of microbial biofilms. Antibiotics are often incorporated into bone cement to prevent infection. The increase in the number of microorganisms acquiring or developing resistance to antibiotics, such as methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant enterococci (VRE), is a major concern. Bacteriocins (antimicrobial peptides) offer an alternative to antibiotics. Their mode of activity involves permanent destabilization of the plasma membrane of target cells. A number of broad-spectrum bacteriocins produced by lactic acid bacteria and Bacillus spp. have recently been reported. In this REVIEW the major characteristics of calcium phosphate bone cements, prosthetic joint-associated infections, and treatment of these infections is discussed. The role of antimicrobial agents in CPCs is discussed and the possibility of incorporating bacteriocins in prosthetic devices is investigated.

Dicalcium phosphate cements: brushite and monetite

Dicalcium phosphate cements were developed two decades ago and ever since there has been a substantial growth in research into improving their properties in order to satisfy the requirements needed for several clinical applications. The present paper presents an overview of the rapidly expanding research field of the two main dicalcium phosphate bioceramics: brushite and monetite. This review begins with a summary of all the different formulae developed to prepare dicalcium phosphate cements, and their setting reaction, in order to set the scene for the key cement physical and chemical properties, such as compressive and tensile strength, cohesion, injectability and shelf-life. We address the issue of brushite conversion into either monetite or apatite. Moreover, we discuss the in vivo behavior of the cements, including their ability to promote bone formation, biodegradation and potential clinical applications in drug delivery, orthopedics, craniofacial surgery, cancer therapy and biosensors.

New processing approaches in calcium phosphate cements and their applications in regenerative medicine

The key feature of calcium phosphate cements (CPCs) lies in the setting reaction triggered by mixing one or more solid calcium phosphate salts with an aqueous solution. Upon mixture, the reaction takes place through a dissolution-precipitation process which is macroscopically observed by a gradual hardening of the cement paste. The precipitation of hydroxyapatite nanocrystals at body or room temperature, and the fact that those materials can be used as self-setting pastes, have for many years been the most attractive features of CPCs. However, the need to develop materials able to sustain bone tissue ingrowth and be capable of delivering drugs and bioactive molecules, together with the continuous requirement from surgeons to develop more easily handling cements, has pushed the development of new processing routes that can accommodate all these requirements, taking advantage of the possibility of manipulating the self-setting CPC paste. It is the goal of this paper to provide a brief overview of the new processing developments in the area of CPCs and to identify the most significant achievements.