Poly(ethylene glycol) analogs grafted with low molecular weight poly(ethylene imine) as non-viral gene vectors

PEI-based functional materials: Fabrication techniques, properties, and biomedical applications

Cationic polymers have recently attracted considerable interest as research breakthroughs for various industrial and biomedical applications. They are particularly interesting due to their highly positive charges, acceptable physicochemical properties, and ability to undergo further modifications, making them attractive candidates for biomedical applications. Polyethyleneimines (PEIs), as the most extensively utilized polymers, are one of the valuable and prominent classes of polycations. Owing to their flexible polymeric chains, broad molecular weight (MW) distribution, and repetitive structural units, their customization for functional composites is more feasible. The specific beneficial attributes of PEIs could be introduced by purposeful functionalization or modification, long service life, biocompatibility, and distinct geometry. Therefore, PEIs have significant potential in biotechnology, medicine, and bioscience. In this review, we present the advances in PEI-based nanomaterials, their transfection efficiency, and their toxicity over the past few years. Furthermore, the potential and suitability of PEIs for various applications are highlighted and discussed in detail. This review aims to inspire readers to investigate innovative approaches for the design and development of next-generation PEI-based nanomaterials possessing cutting-edge functionalities and appealing characteristics.

Biomaterial-based gene therapy

Gene therapy, a medical approach that involves the correction or replacement of defective and abnormal genes, plays an essential role in the treatment of complex and refractory diseases, such as hereditary diseases, cancer, and rheumatic immune diseases. Nucleic acids alone do not easily enter the target cells due to their easy degradation in vivo and the structure of the target cell membranes. The introduction of genes into biological cells is often dependent on gene delivery vectors, such as adenoviral vectors, which are commonly used in gene therapy. However, traditional viral vectors have strong immunogenicity while also presenting a potential infection risk. Recently, biomaterials have attracted attention for use as efficient gene delivery vehicles, because they can avoid the drawbacks associated with viral vectors. Biomaterials can improve the biological stability of nucleic acids and the efficiency of intracellular gene delivery. This review is focused on biomaterial-based delivery systems in gene therapy and disease treatment. Herein, we review the recent developments and modalities of gene therapy. Additionally, we discuss nucleic acid delivery strategies, with a focus on biomaterial-based gene delivery systems. Furthermore, the current applications of biomaterial-based gene therapy are summarized.

Development of Covalent Chitosan-Polyethylenimine Derivatives as Gene Delivery Vehicle: Synthesis, Characterization, and Evaluation

There is an increasing interest in cationic polymers as important constituents of non-viral gene delivery vectors. In the present study, we developed a versatile synthetic route for the production of covalent polymeric conjugates consisting of water-soluble depolymerized chitosan (dCS; M_W 6–9 kDa) and low molecular weight polyethylenimine (PEI; 2.5 kDa linear, 1.8 kDa branched). dCS-PEI derivatives were evaluated based on their physicochemical properties, including purity, covalent bonding, solubility in aqueous media, ability for DNA condensation, and colloidal stability of the resulting polyplexes. They were complexed with non-integrating DNA vectors coding for reporter genes by simple admixing and assessed in vitro using liver-derived HuH-7 cells for their transfection efficiency and cytotoxicity. Using a rational screening cascade, a lead compound was selected (dCS-Suc-LPEI-14) displaying the best balance of biocompatibility, cytotoxicity, and transfection efficiency. Scale-up and in vivo evaluation in wild-type mice allowed for a direct comparison with a commercially available non-viral delivery vector (in vivo-jetPEI). Hepatic expression of the reporter gene luciferase resulted in liver-specific bioluminescence, upon intrabiliary infusion of the chitosan-based polyplexes, which exceeded the signal of the in vivo jetPEI reference formulation by a factor of 10. We conclude that the novel chitosan-derivative dCS-Suc-LPEI-14 shows promise and potential as an efficient polymeric conjugate for non-viral in vivo gene therapy.

Triton X-100-Modified Adenosine Triphosphate-Responsive siRNA Delivery Agent for Antitumor Therapy

Modified polyethyleneimine (PEI) has been widely used as siRNA delivery agents. Here, a new Triton X-100-modified low-molecular-weight PEI siRNA delivery agent is developed together with the coupling of 4-carboxyphenylboronic acid (PBA) and dopamine grafted vitamin E (VEDA). Triton X-100, a nonionic detergent, greatly improves the cellular uptake of siRNA as well as the siRNA escape from endosome/lysosome because of its high transmembrane ability. In addition, the boronate bond between PBA and VEDA of the transfection agent can be triggered to release its entrapped siRNA because of the high level of adenosine triphosphate (ATP) in cancer cells. The transfection agent is successfully applied to deliver siRNAs targeting endogenous genes of epidermal growth factor receptor (EGFR) and kinesin-5 (Eg5) to cancer cells, showing good results on Eg5 and EGFR silencing ability and inhibition of cancer cell migration. Further in vivo study indicates that the Triton X-100-modified transfection agent is also efficient to deliver siRNA to cancer cells and shows significant tumor growth inhibition on mice tumor models. These results indicate that the Triton X-100-modified ATP-responsive transfection agent is a promising gene delivery vector for target gene silencing in vitro and in vivo.

High Molecular Weight Poly(ethylenimine)-Based Water-Soluble Lipopolymer for Transfection of Cancer Cells

Over the past decade, search for novel materials for nucleic acid delivery has prompted a special interest in polymeric nanoparticles (NPs). In this study, the biological applicability of a water-soluble cationic lipopolymer (WSLP) obtained by the modification of high molecular weight branched poly(ethylenimine) (PEI) with cholesteryl chloroformate is characterized and assessed for better cellular membrane permeability. To test the delivery efficiency of the produced lipopolymer, plasmid DNA (pDNA) encoding the enhanced green fluorescent protein and WSLP are mixed at different charge ratios. WSLP and WSLP/pDNA complexes are characterized by dynamic and static light scattering, particle charge detection, scanning electron microscopy, and transmission electron microscopy. The pDNA loading of WSLP is also verified by agarose gel electrophoresis. Cytotoxicity of PEI, WSLP, and of WSLP/pDNA is evaluated on human A549 and HeLa cells. A remarkable dependence of the toxicity on the dose, cholesterylation, and charge ratio is detected. Transfection is monitored by flow cytometry and by fluorescence microscopy. Importantly, cholesterylation decreases the toxicity of the polymer, while promoting high transfection efficiency in both cell lines. This work indicates a possible optimization mode of the high molecular weight PEI-based WSLP rendering it a promising candidate for gene delivery.

Influence of Network Structure on the Crystallization Behavior in Chemically Crosslinked Hydrogels

The network structure of hydrogels is a vital factor to determine their physical properties. Two network structures within hydrogels based on eight-arm star-shaped poly(ethylene glycol)(8PEG) have been obtained; the distinction between the two depends on the way in which the macromonomers were crosslinked: either by (i) commonly-used photo-initiated chain-growth polymerization (8PEG⁻UV), or (ii) Michael addition step-growth polymerization (8PEG⁻NH₃). The crystallization of hydrogels is facilitated by a solvent drying process to obtain a thin hydrogel film. Polarized optical microscopy (POM) results reveal that, while in the 8PEG⁻UV hydrogels only nano-scaled crystallites are apparent, the 8PEG⁻NH₃ hydrogels exhibit an assembly of giant crystalline domains with spherulite sizes ranging from 100 to 400 µm. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses further confirm these results. A model has been proposed to elucidate the correlations between the polymer network structures and the crystallization behavior of PEG-based hydrogels.

Core/Shell Gene Carriers with Different Lengths of PLGA Chains to Transfect Endothelial Cells

In order to improve the transfection efficiency and reduce the cytotoxicity of gene carriers, many strategies have been used to develop novel gene carriers. In this study, five complex micelles (MSP(2 k), MSP(4 k), MSP(6 k), MSP(8 k), and MSP(10 k)) were prepared from methoxy-poly(ethylene glycol)-b-poly(d,l-lactide-co-glycolide) (mPEG-b-PLGA) and sorbitol-poly(d,l-lactide-co-glycolide)-graft-PEI (sorbitol-PLGA-g-PEI, where the designed molecular weights of PLGA chains were 2 kDa, 4 kDa, 6 kDa, 8 kDa, and 10 kDa, respectively) copolymers by a self-assembly method, and the mass ratio of mPEG-b-PLGA to sorbitol-PLGA-g-PEI was 1/3. These complex micelles and their gene complexes had appropriate sizes and zeta potentials, and pEGFP-ZNF580 (pDNA) could be efficiently internalized into EA.hy926 cells by their gene complexes (MSP(2 k)/pDNA, MSP(4 k)/pDNA, MSP(6 k)/pDNA, MSP(8 k)/pDNA, and MSP(10 k)/pDNA). The MTT assay results demonstrated that the gene complexes had low cytotoxicity in vitro. When the hydrophobic PLGA chain increased above 6 kDa, the gene complexes showed higher performance than that prepared from short hydrophobic chains. Moreover, the relative ZNF580 protein expression levels in MSP(6 k)/pDNA, MSP(8 k)/pDNA, and MSP(10 k)/pDNA) groups were 79.6%, 71.2%, and 73%, respectively. These gene complexes could promote the transfection of endothelial cells, while providing important information and insight for the design of new and effective gene carriers to promote the proliferation and migration of endothelial cells.

Nanoparticles complexed with gene vectors to promote proliferation of human vascular endothelial cells

Amphiphilic block copolymers containing biodegradable hydrophobic segments of depsipeptide based copolymers have been synthesized and explored as gene carriers for enhancing proliferation of endothelial cells in vitro. These polymers form nanoparticles (NPs) with positive charges on their surface, which could condense recombinant plasmids of enhanced green fluorescent protein plasmid and ZNF580 gene (pEGFP-ZNF580) and protect them against DNase I. ZNF580 gene is efficiently transported into EA.hy926 cells to promote their proliferation, whereby the transfection efficiency of NPs/pEGFP-ZNF580 is approximately similar to that of Lipofectamine 2000. These results indicate that the NPs might have potential as a carrier for pEGFP-ZNF580, which could support endothelialization of cardiovascular implants.

PEGylated peptide based reductive polycations as efficient nonviral gene vectors

To overcome the critical barriers in gene delivery, a series of reducible polycations (RPCs) based on low molecular weight (LMW) peptides, i.e. PolyHK6 H, PolyHK6 H-mPEG1 , PolyHK6 H-mPEG2 , and PolyHK6 H-mPEG3 , with different poly(ethylene glycol) (PEG) contents, are synthesized and evaluated as nonviral gene vectors. All the RPCs exhibit lower cytotoxicity compared with 25 kDa polyethyleneimine (PEI) and PEGylated PEI (PEI-mPEG: PEI-mPEG1 , PEI-mPEG2 , and PEI-mPEG3 ). PolyHK6 H-mPEG1 and PolyHK6 H-mPEG2 can bind and condense plasmid deoxyribonucleic acid (pDNA) efficiently with a particle size of about 200 nm. Moreover, they display much higher transfection efficiency than that of 25 kDa PEI especially in serum-supplemented medium. Moreover, PolyHK6 H-mPEG1 has equal transfection efficiency with PEI-mPEG1 which is optimal in the PEI-mPEG, but PolyHK6 H-mPEG1 exhibits significantly lower cytotoxicity than PEI-mPEG1 . This is attributed to the fact that inter-peptide disulfide bonds can increase the stability of RPCs/pDNA complexes in extracellular environment and thereafter cleave in cytoplasm to facilitate the release of pDNA in intracellular environment. The PEGylated RPCs demonstrate here improved intracellular gene transfer performance and will have great potential applications in vivo.

Gene delivery of PEI incorporating with functional block copolymer via non-covalent assembly strategy

A novel functional diblock polymer P(PEGMA-b-MAH) is prepared and incorporated to improve the gene delivery efficiency of poly(ethyleneimine) PEI via non-covalent assembly strategy. First, P(PEGMA-b-MAH) is prepared from l-methacrylamidohistidine methyl ester (MAH) by reversible addition fragmentation chain transfer polymerization, with poly[poly(ethylene glycol) methyl ether methacrylate] (P(PEGMA)) as the macroinitiator. Then P(PEGMA-b-MAH) is assembled with plasmid DNA (pDNA) and PEI (M(w)=10kDa) to form PEI/P(PEGMA-b-MAH)/pDNA ternary complexes. The agarose gel retardation assay shows that the presence of P(PEGMA-b-MAH) does not interfere with DNA condensation by the PEI. Dynamic light scattering tests show that PEI/P(PEGMA-b-MAH)/pDNA ternary complexes have excellent serum stability. In vitro transfection indicates that, compared to the P(PEGMA-b-MAH) free PEI-25k/pDNA binary complexes, PEI-10k/P(PEGMA-b-MAH)/pDNA ternary complexes have lower cytotoxicity and higher gene transfection efficiency, especially under serum conditions. The ternary complexes proposed here can inspire a new strategy for the development of gene and drug delivery vectors.

Design and Development of Degradable Polyethylenimines for Delivery of DNA and Small Interfering RNA: An Updated Review

Polyethylenimine (PEI), considered as the most potent and promising alternative carrier to viral vectors, has been studied as the “state of the art” among various polymers for nonviral gene delivery applications for many years. Although PEI-based carrier minimizes the bottlenecks associated with viral vectors such as unwanted immunogenicity and production problems, the toxic side effects of PEI prevent its rapid advancements due to nondegradable nature. In this regard, various degradable cross-linking and/or grafting agents have been linked to synthesize degradable PEIs in order to minimize the toxicity and improve the efficacy of PEI-mediated gene carriers. This paper describes an update on various cross-linkers and grafting agents in the design and development of degradable PEI derivatives and their potential applications for effective delivery of DNA in vitro and in vivo. The molecular weight (MW) of PEI and the structural relationship to its cellular toxicity and transfection ability were also discussed. Finally, the potential applications of various degradable PEIs for small interfering RNA (siRNA)-mediated gene silencing were also covered.

Generation of a focused poly(amino ether) library: polymer-mediated transgene delivery and gold-nanorod based theranostic systems

A focused library of twenty-one cationic poly(amino ethers) was synthesized following ring-opening polymerization of two diglycidyl ethers by different oligoamines. The polymers were screened in parallel for plasmid DNA (pDNA) delivery, and transgene expression efficacies of individual polymers were compared to those of 25 kDa polyethylenimine (PEI), a current standard for polymer-mediated transgene delivery. Seven lead polymers that demonstrated higher transgene expression than PEI in pancreatic and prostate cancer cells lines were identified from the screen. All seven lead polymers showed highest transgene expression at a polymer:pDNA weight ratio of 5:1 in the MIA PaCa-2 pancreatic cancer cell line. Among the conditions studied, transgene expression efficacy correlated with minimal polymer cytotoxicity but not polyplex sizes. In addition, this study indicated that methylene spacing between amine centers in the monomers, amine content, and molecular weight of the polymers are all significant factors and should be considered when designing polymers for transgene delivery. A lead effective polymer was employed for coating gold nanorods, leading to theranostic nanoassemblies that possess combined transgene delivery and optical imaging capabilities, leading to potential theranostic systems.

DEGRADABLE POLYETHYLENIMINE DERIVATIVES AS GENE CARRIERS

Gene therapy is a treatment for inborn and acquired diseases, although the development of safe and effective gene delivery system is a great challenge to make a gene therapy a success. Viral vectors have been used in a majority of clinics because of their high transfection efficiency in vitro and in vivo. However, their use has been limited because of several drawbacks, such as induction of immune response, recombination of wild-type viruses, limitation in the size of inserted gene, and difficulty in large-scale production. Nonviral vectors have been widely proposed safe alternatives to viral vectors because they have low immunogenicity, flexibility in the size of gene to be delivered, cell targetibility, and easy scalability of production, although they have low transfection efficiency compared to viral vectors. Among nonviral vectors, polyethylenimine (PEI) has been widely used as a standard gene carriers due to its high pH-buffering capacity for endosomal escape although high-molecular-weight PEI is too toxic owing to non-degradability. Recently, many types of degradable PEI have been studied due to high transfection efficiency with lower cytotoxicity. This review explains recent progress on the development of degradable PEIs as nonviral vectors. The present paper summarizes the transfection efficiency of DNA or silencing efficiency of small interfering RNA (siRNA) based on the kinds of degradable linkage between low PEI and crosslinkers. Degradable linkages, such as ester, disulfide, imines, carbamate, amide and ketal in the degradable PEIs are covered.

C/EBP-α and C/EBP-β-mediated adipogenesis of human mesenchymal stem cells (hMSCs) using PLGA nanoparticles complexed with poly(ethyleneimmine)

In this study, to drive efficient adipogenic differentiation, the adipogenic transcription factors C/EBP-α and C/EBP-β fused to green fluorescent protein (GFP) or red fluorescent protein (RFP) were complexed with poly-ethyleneimine (PEI) coupled with biodegradable PLGA nanospheres and delivered to human mesenchymal stem cell (hMSC). FACS analysis revealed that the transfection efficiency of C/EBP-α, C/EBP-β, or both genes complexed with PEI-coated PLGA nanospheres was 12.59%, 21.74%, and 28.96% of hMSCs. Expression and localization of C/EBP-α and C/EBP-β were confirmed by Western blotting and confocal laser microscopy. Overexpression of exogenous C/EBP-α and C/EBP-β significantly elevated adipogenic differentiation processes as indicated by RT-PCR, real-time PCR, Western blotting, histology, and immunofluorescence microscopy. During adipogenesis, PEI-coupled PLGA nanospheres complexed with C/EBP-α and C/EBP-β greatly increased the adipogenic capability of in vitro cultured cells, as well of in vivo transplanted cells. The expression of genes and proteins specific to adipogenic differentiation in hMSCs was significantly elevated compared to the controls.