Biomimetic remineralization as a progressive dehydration mechanism of collagen matrices--implications in the aging of resin-dentin bonds

Novel biomimetic peptide-loaded chitosan nanoparticles improve dentin bonding via promoting dentin remineralization and inhibiting endogenous matrix metalloproteinases

OBJECTIVE

This study aims to synthesize novel chitosan nanoparticles loaded with an amelogenin-derived peptide QP5 (TMC-QP5/NPs), investigate their remineralization capability and inhibitory effects on endogenous matrix metalloproteinases (MMPs), and evaluate the dentin bonding properties of remineralized dentin regulated by TMC-QP5/NPs.

METHODS

TMC-QP5/NPs were prepared by ionic crosslinking method and characterized by dynamic light scattering method, scanning electron microscopy, transmission electron microscope, atomic force microscope, Fourier transform infrared spectroscopy, and differential scanning calorimetry. The encapsulation and loading efficiency of TMC-QP5/NPs and the release of QP5 were examined. To evaluate the remineralization capability of TMC-QP5/NPs, the mechanical properties, and the changes in structure and composition of differently conditioned dentin were characterized. The MMPs inhibitory effects of TMC-QP5/NPs were explored by MMP Activity Assay and in-situ zymography. The dentin bonding performance was detected by interfacial microleakage and microshear bond strength (μSBS).

RESULTS

TMC-QP5/NPs were successfully synthesized, with uniform size, good stability and biosafety. The encapsulation and loading efficiency of TMC-QP5/NPs was respectively 69.63 ± 2.22% and 13.21 ± 0.73%, with a sustained release of QP5. TMC-QP5/NPs could induce mineral deposits on demineralized collagen fibers and partial occlusion of dentin tubules, and recover the surface microhardness of dentin, showing better remineralization effects than QP5. Besides, TMC-QP5/NPs significantly inhibited the endogenous MMPs activity. The remineralized dentin induced by TMC-QP5/NPs exhibited less interfacial microleakage and higher μSBS, greatly improved dentin bonding.

SIGNIFICANCE

This novel peptide-loaded chitosan nanoparticles improved resin-dentin bonding by promoting dentin remineralization and inactivating MMPs, suggesting a promising strategy for optimizing dentin adhesive restorations.

The mechanism of biomineralization: Progress in mineralization from intracellular generation to extracellular deposition

Biomineralization is a highly regulated process that results in the deposition of minerals in a precise manner, ultimately producing skeletal and dental hard tissues. Recent studies have highlighted the crucial role played by intracellular processes in initiating biomineralization. These processes involve various organelles, such as the endoplasmic reticulum(ER), mitochondria, and lysosomes, in the formation, accumulation, maturation, and secretion of calcium phosphate (CaP) particles. Particularly, the recent in-depth study of the dynamic process of the formation of amorphous calcium phosphate(ACP) precursors among organelles has made great progress in the development of the integrity of the biomineralization chain. However, the precise mechanisms underlying these intracellular processes remain unclear, and they cannot be fully integrated with the extracellular mineralization mechanism and the physicochemical structure development of the mineralization particles. In this review, we aim to focus on the recent progress made in understanding intracellular mineralization organelles' processes and their relationship with the physicochemical structure development of CaP and extracellular deposition of CaP particles.

Er:YAG Laser Physical Etching and Ultra-High-Molecular-Weight Cross-Linked Sodium Polyacrylate Chemical Etching for a Reliable Dentin Dry Bonding

Dentin bond interface stability is the key issue of dental adhesion in present clinical dentistry. The concept of selective extrafibrillar demineralization has opened a new way to maintain intrafibrillar minerals to prevent interface degradation. Here, using ultra-high-molecular-weight sodium polyacrylate [Carbopol (Carbo) > 40 kDa] as a calcium chelator, we challenge this concept and propose a protocol for reliable dentin dry bonding. The results of high-resolution transmission electron microscopy revealed periodic bands of 67 nm dentin collagen fibrils after Carbo etching, and the hydroxyproline concentration increasing with prolonged chelating time denied the concept of extrafibrillar demineralization. The results that wet and dry bonding with Carbo-based demineralization produced a weaker bond strength than the traditional phosphoric acid wet adhesion suggested that the Carbo-based demineralization is an unreliable adhesion strategy. A novel protocol of Er:YAG laser physical etching followed by Carbo chemical etching for dentin adhesion revealed that a micro-/nano-level rough, rigid, and non-collagen exposed dentin surface was produced, the micro-tensile bond strength was maintained after aging under dry and wet bonding modes, and in situ zymography and nanoleakage within the hybrid layers presented lower signals after aging. Cell culture in vitro and a rabbit deep dentin adhesion model in vivo proved that this protocol is safe and biocompatible. Taken together, the concept of extrafibrillar demineralization is limited and insufficient to use in the clinic. The strategy of Er:YAG laser physical etching followed by Carbo chemical etching for dentin adhesion produces a bonding effect with reliability, durability, and safety.

Effects of cryopreservation on the biomechanical properties of dentin in cryopreserved teeth: An in-vitro study

This study focused on the biomechanical properties and microstructural changes in dentin of teeth in different age groups after cryopreserved for different durations. Ninety third molars from three age groups (youth group, middle-age group, and elderly group), were collected and randomly divided into three groups according to freezing time at -196 °C (7 days, 30 days, and 90 days). Control group was shored at ordinary temperature. After rewarming, the compressive strength and elastic modulus of the dentin were measured with an electronic universal tester. Scanning electron microscopy was used to evaluate the microstructure of dentin after cryopreservation. After cryopreservation, the compressive strength of the teeth in each experimental group was not significantly different from control group. With the increase of freezing time and age, dentin's elastic modulus showed a decreasing trend. There were statistically significances between the control group and freezing 90d group, freezing 7d and 90d group, youth and middle-aged group, youth and elderly group (P < 0.05). Both freezing time and age factors were significant for the elastic modulus of dentin(P＜0.05). There was no interaction effect for age and freezing time. In transverse sections of scanning electron microscopy, the dentinal tubule became narrower, partially occluded, and more easily adhered to impurities in the long freezing time and elderly group. In longitudinal sections, with freezing time and age, the inner wall of the dentinal tubules became rough especially in the aged group cryopreserved for 90 days. No significant microcracks exited in any of the longitudinal sections of dentin.

EDTA-functionalized silica nanoparticles as a conditioning agent for dentin bonding using etch-and-rinse technique

OBJECTIVE

This study investigated the possibility of using ethylenediaminetetraacetic acid functionalized silica nanoparticles (EDTA-SiO₂) as a dentin-conditioning agent using etch-and-rinse technique to promote the durability of dentin bonding.

METHODS

The SiO₂-EDTA were synthesized by N- [(3- trimethoxysilyl) propyl] ethylenediamine triacetic acid (EDTA-TMS) and SiO₂ (50 nm), then characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The capacity of SiO₂-EDTA to chelate calcium ions from dentin was examined by inductively coupled plasma-optic emission spectrometry (ICP-OES). The dentin surfaces conditioned with SiO₂-EDTA were detected by field emission scanning electron microscopy (SEM), TEM and microhardness testing. For dentin bonding, dentin surfaces were adopted wet- or dry-bonding technique and bonded with adhesive (Adper^TM Single Bond2) and applied composite resin (Filtek Z350) on them. The durability of dentin bonding was evaluated by mircotensile bond strength test, in-situ zymography and nanoleakage testing.

RESULTS

FTIR, TGA and XPS results showed that SiO₂-EDTA contained N element and carboxyl groups. SEM, TEM and microhardness results indicated that SiO₂-EDTA group created extrafibrillar demineralization and retained more intrafibrillar minerals within dentin surface. In the dentin bonding experiment, SiO₂-EDTA group achieved acceptable bond strength, and reduced the activity of matrix metalloproteinase and nanoleakage along bonding interface.

CONCLUSION

It was possible to generate a feasible dentin conditioning agent (SiO₂-EDTA), which could create dentin extrafibrillar demineralization and improve dentin bond durability.

CLINICAL SIGNIFICANCE

This study introduces a new dentin conditioning scheme based on SiO₂-EDTA to create extrafibrillar demineralization for dentin bonding. This strategy has the potential to be used in clinic to promote the life of restoration bonding.

Polyphenols Can Improve Resin-Dentin Bond Durability by Promoting Amorphous Calcium Phosphate Nanoparticles to Backfill the Dentin Matrix

Objective

To investigate the effects of proanthocyanidins (PA), myricetin, resveratrol, and kaempferol on the modification of dentin collagen and the inhibition of matrix metalloproteinase (MMP) activity, and to evaluate their contributions to the biomimetic remineralization and resin-dentin bonding performance.

Methods

Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and in situ zymography were applied to verify the collagen modification and MMP activity inhibition induced by these four polyphenols. Scanning electron microscopy/energy dispersive spectrometer (SEM/EDS) analysis, X-ray diffraction (XRD), ATR-FTIR, Vickers hardness numbers (VHN), and micro-computed tomography (micro-CT) were performed to characterize the remineralized dentin. Microtensile bond strength (μTBS) and nanoleakage were investigated to evaluate the effects of the four polyphenols on resin-dentin bonding durability.

Results

ATR-FTIR and in situ zymography confirmed that these four polyphenols could modify dentin collagen and inhibit MMP activity, respectively. Chemoanalytic characterization exhibited the efficacies of the four polyphenols in promoting dentin biomimetic remineralization. The surface hardness of PA-pretreated dentin was the greatest. Micro-CT results demonstrated that the PAs group possessed the highest amount of dentin surface minerals and the lowest amount of deep-layer minerals. The surface and deep-layer mineral contents of the Myr group were higher than Res and Kae groups. Treatment with these four polyphenols significantly increased the initial μTBS compared with the control group without primer conditioning. μTBS decreased significantly during aging, and the decrease was more severe in the PAs and Kae groups than in the Myr and Res groups. With or without aging, the polyphenol groups exhibited relatively less fluorescence. However, the Myr and Res groups showed less serious nanoleakage after aging.

Conclusion

PA, myricetin, resveratrol, and kaempferol can modify dentin collagen, inhibit MMP activity, promote biomimetic remineralization, and improve resin-dentin bond durability. Compared with PA and kaempferol, myricetin and resveratrol are more effective in improving resin-dentin bonding.

The Effect of Polyacrylic Acid and Sodium Trimetaphosphate on Dentin Hybrid Layer Remineralization: An In Vitro Study

Background

Adhesive monomers are not able to fully encapsulate collagen fibrils in hybrid layer leaving them vulnerable to time-dependent hydrolytic degradation. The current in vitro study was designed for investigation of the remineralization of the resin-dentin hybrid layer using biomimetic analogs by nanoleakage investigation.

Material and Methods

Firstly, occlusal enamel of thirty human molars was removed exposing flat surface of dentin, then randomly divided into three main groups according to the different remineralizing protocols (n=10) (R): control group (R0), STMP group (R1), and biomimetic remineralizing group (R2). The dentin surface of the STMP and biomimetic remineralizing groups (R1 and R2) was treated with STMP solution, followed by self-etch adhesive application on dentin surface of all groups, and restored with double 2-mm thick layers of resin composite. Each tooth was sectioned perpendicularly to the resin-dentin interface for producing 1-mm thick slaps. Each group was subdivided into four subgroups according to the incubation time to 24 hours, one month, three months, and 4 months. Retrieved slabs were prepared for nanoleakage for evaluation of metallic silver particles distribution percentage at the resin-dentin interface using digital image analysis software.

Results

There was a statistically significant increase in nanoleakage over time in all three groups. However, the third group showed the least increase in metallic silver uptake over time.

Conclusions

Hybrid layer could be remineralized by using dual-biomimetic analogs (PAA and STMP). Key words:Hybrid layer, remineralization, nanoleakage, polyacrylic acid, sodium trimetaphosphate.

Degradation and Stabilization of Resin-Dentine Interfaces in Polymeric Dental Adhesives: An Updated Review

Instability of the dentine-resin interface is owed to the partial/incomplete penetration of the resin adhesives in the collagen fibrils. However, interfacial hydrolysis of the resin-matrix hybrid layer complex activates the collagenolytic and esterase enzymes that cause the degradation of the hybrid layer. Adequate hybridization is often prevented due to the water trapped between the interfibrillar spaces of the collagen network. Cyclic fatigue rupture and denaturation of the exposed collagen fibrils have been observed on repeated application of masticatory forces. To prevent interfacial microstructure, various approaches have been explored. Techniques that stabilize the resin–dentine bond have utilized endogenous proteases inhibitors, cross linking agents’ incorporation in the exposed collagen fibrils, an adhesive system free of water, and methods to increase the monomer penetration into the adhesives interface. Therefore, it is important to discover and analyze the causes of interfacial degradation and discover methods to stabilize the hybrid layer to execute new technique and materials. To achieve a predictable and durable adhesive resin, restoration is a solution to the many clinical problems arising due to microleakage, loss of integrity of the restoration, secondary caries, and postoperative sensitivity. To enhance the longevity of the resin-dentine bond strength, several experimental strategies have been carried out to improve the resistance to enzymatic degradation by inhibiting intrinsic collagenolytic activity. In addition, biomimetic remineralization research has advanced considerably to contemporary approaches of both intrafibrillar and extrafibrillar remineralization of dental hard tissues. Thus, in the presence of biomimetic analog complete remineralization of collagen, fibers are identified.

Effect of Diode Laser versus a Combination of Sodium Trimetaphosphate with Polyacrylic Acid on Obliteration of Dentinal Tubules: An In Vitro Study

BACKGROUND: Irradiation with diode laser and biomimetic remineralization are important methods in the treatment of hypersensitivity and dentin remineralization. AIM: The aim of the study was evaluation of the effect of diode laser versus the effect of sodium trimetaphosphate (STMP) with polyacrylic acid (PAA) on obliteration of dentinal tubules (DT). MATERIALS AND METHODS: Sixty dentin discs with a thickness of 2 mm were prepared and conditioned with EDTA for 15 s. Then, all dentin discs were divided into three main groups (20 discs each) according to the treatment method; control, diode laser treated, and STMP with PAA group (biomimetic group). Each group was subdivided into four subgroups (five discs each) according to the storage time; 2 h (To), 1 month (T1), 2 months (T2), and 3 months (T3), respectively. All samples were prepared to be analyzed after each time interval using environmental scanning electron microscope (ESEM). Comparison of differences of DT obliteration percentage made on each group before and after the treatment were performed using computer-assisted digital image analysis. RESULTS: Control group showed the least DT obliteration percentage, the samples of laser group recorded statistically significant increase in DT obliteration percentage at To in comparison to the biomimetic group. Meanwhile, at T1, there was no statistically significant difference between both laser and biomimetic groups. However, statistically significant decrease was recorded in laser group at T2 and T3, respectively. CONCLUSION: Irradiation with diode laser and biomimetic remineralization using PAA with STMP are a promising methods to obliterate opened DT effectively.

Zn-containing Adhesives Facilitate Collagen Protection and Remineralization at the Resin-Dentin Interface: A Narrative Review

This is a narrative review of the literature assessing the potential effectiveness of doping dentin polymeric adhesives with zinc compounds in order to improve bonding efficacy, remineralization and protection against degradation. A literature search was conducted using electronic databases, such as PubMed, MEDLINE, DIMDI and Web of Science. Through our search, we found literature demonstrating that Zn-doped dentin adhesives promote protection and remineralization of the resin-dentin interfaces. The increased bioactivity has also facilitated dentinal tubules' occlusion by crystals' precipitation contributing to improved sealing efficacy of restorations. Loading dentin adhesives with zinc gives rise to an increase of both crystallinity of mineral and crosslinking of collagen. The main role of zinc, in dentin adhesives, is to inhibit collagen proteolysis. We concluded that zinc exerts a protective effect through binding at the collagen-sensitive cleavage sites of matrix-metalloproteinases (MMPs), contributing to dentin matrix stabilization. Zinc may not only act as a MMPs inhibitor, but also influence signaling pathways and stimulate metabolic effects in dentin mineralization and remineralization processes. Zn-doped adhesives increase the longevity of dentin bonding through MMPs inhibition. Zn poses a remineralization strategy in demineralized dentin.

Advances in biomineralization-inspired materials for hard tissue repair

Biomineralization is the process by which organisms form mineralized tissues with hierarchical structures and excellent properties, including the bones and teeth in vertebrates. The underlying mechanisms and pathways of biomineralization provide inspiration for designing and constructing materials to repair hard tissues. In particular, the formation processes of minerals can be partly replicated by utilizing bioinspired artificial materials to mimic the functions of biomolecules or stabilize intermediate mineral phases involved in biomineralization. Here, we review recent advances in biomineralization-inspired materials developed for hard tissue repair. Biomineralization-inspired materials are categorized into different types based on their specific applications, which include bone repair, dentin remineralization, and enamel remineralization. Finally, the advantages and limitations of these materials are summarized, and several perspectives on future directions are discussed.

Traditional Microscopic Techniques Employed in Dental Adhesion Research-Applications and Protocols of Specimen Preparation

Microscopy is a traditional method to perform ex vivo/in vitro dental research. Contemporary microscopic techniques offer the opportunity to observe dental tissues and materials up to nanoscale level. The aim of this paper was to perform a literature review on four microscopic methods, which are widely employed in dental studies concerning the evaluation of resin-dental adhesive interfaces-confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM). The literature search was performed using digital databases: PubMed, Web of Science and Scopus. On the basis of key words relevant to the topic and established eligibility criteria, finally 84 papers were included in the review. Presented microscopic techniques differ in their principle of operation and require specific protocols for specimen preparation. With regard to adhesion studies, microscopy assists in the description of several elements involved in adhesive bonding, as well as in the assessment of the condition of enamel surface and the most appropriate etching procedures. There are several factors determining the quality of the interaction between the substrates which could be recognized and a potential for further implementation of microscopic techniques in dental research could be recognized, especially when these techniques are used simultaneously or combined with spectroscopic methods. Through such microscopy techniques it is possible to provide clinically relevant conclusions and recommendations, which can be easily introduced for enamel-safe bonding and bonding protocols, as well as optimal pretreatments in dentine preparation.

Dentin remineralization in acidic solution without initial calcium phosphate ions via poly(amido amine) and calcium phosphate nanocomposites after fluid challenges

OBJECTIVES

A previous study showed that the combination of poly(amido amine) (PAMAM) and rechargeable composites with nanoparticles of amorphous calcium phosphate (NACP) induced dentin remineralization in an acidic solution with no initial calcium (Ca) and phosphate (P) ions, mimicking the oral condition of individuals with dry mouths. However, the frequent fluid challenge in the oral cavity may decrease the remineralization capacity. Therefore, the objective of the present study was to investigate the remineralization efficacy on dentin in an acid solution via PAMAM + NACP after fluid challenges for the first time.

METHODS

The NACP nanocomposite was stored in a pH 4 solution for 77 days to exhaust its Ca and P ions and then recharged. Demineralized dentin samples were divided into four groups: (1) control dentin, (2) dentin coated with PAMAM, (3) dentin with recharged NACP composite, and (4) dentin with PAMAM + recharged NACP. PAMAM-coated dentin was shaken in phosphate-buffered saline for 77 days to desorb PAMAM from dentin. Samples were treated in pH 4 lactic acid with no initial Ca and P ions for 42 days.

RESULTS

After 77 days of fluid challenge, PAMAM failed to prevent dentin demineralization in lactic acid. The recharged NACP nanocomposite raised the pH to above 6.5 and re-released more than 6.0 and 4.0 mmol/L Ca and P ions daily, respectively, which inhibited further demineralization. In contrast, the PAMAM + NACP combined method induced great dentin remineralization and restored the dentin microhardness to 0.54 ± 0.04 GPa, which approached that of sound dentin (P = 0.426, P > 0.05).

CONCLUSIONS

The PAMAM + NACP combination achieved dentin remineralization in an acid solution with no initial Ca and P ions, even after severe fluid challenges.

CLINICAL RELEVANCE

The novel PAMAM + NACP has a strong and sustained remineralization capability to inhibit secondary caries, even for individuals with dry mouths.

A matched irrigation and obturation strategy for root canal therapy

In root canal therapy, irrigating solutions are employed to eliminate the bacterial load and also prepare dentin for sealer interaction. The aim of this research was to assess how irrigating solutions employed on their own or in sequence affected the tooth structure. The best way to prepare the tooth for obturation using hydraulic calcium silicate cement (HCSC) sealers and gutta-percha, thus guiding clinicians on a matched irrigation-obturation strategy for optimized root canal treatment was investigated. The effect of irrigating solutions on dentine was investigated by assessing changes in dentin microhardness, ultrastructure and mineral content, organic/inorganic matter, surface roughness and Young’s modulus. The interaction of four root canal sealers with the dentin was analysed by assessing the changes in microhardness of the dentin after sealer placement and also the sealer to dentin interface by scanning electron and confocal laser microscopy. The irrigating solutions damaged the dentin irreversibly both when used on their own and in combination. The best sequence involved sodium hypochlorite followed by chelator and a final rinse with sodium hypochlorite and obturation using HCSC sealers that enabled the restoration of dentin properties. The HCSC sealers did not rely on chelator irrigating solutions for a good material adaptation to dentin.

Zn-doping of silicate and hydroxyapatite-based cements: Dentin mechanobiology and bioactivity

The objective was to state zinc contribution in the effectiveness of novel zinc-doped dentin cements to achieve dentin remineralization, throughout a literature or narrative exploratory review. Literature search was conducted using electronic databases, such as PubMed, MEDLINE, DIMDI, Embase, Scopus and Web of Science. Both zinc-doping silicate and hydroxyapatite-based cements provoked an increase of both bioactivity and intrafibrillar mineralization of dentin. Zinc-doped hydroxyapatite-based cements (oxipatite) also induced an increase in values of dentin nano-hardness, Young's modulus and dentin resistance to deformation. From Raman analyses, it was stated higher intensity of phosphate peaks and crystallinity as markers of dentin calcification, in the presence of zinc. Zinc-based salt formations produced low microleakage and permeability values with hermetically sealed tubules at radicular dentin. Dentin treated with oxipatite attained preferred crystal grain orientation with polycrystalline lattices. Thereby, oxipatite mechanically reinforced dentin structure, by remineralization. Dentin treated with oxipatite produced immature crystallites formations, accounting for high hydroxyapatite solubility, instability and enhanced remineralizing activity.

Effect of Remineralized Collagen on Dentin Bond Strength through Calcium Phosphate Ion Clusters or Metastable Calcium Phosphate Solution

This study aimed to investigate whether dentin remineralization and micro-tensile bond strength increase when using calcium phosphate ion clusters (CPICs) or metastable Ca-P. After being etched, each dentin specimen was designated into four groups and treated with the appropriate solution for 1 min: 100% ethanol, 2 and 1 mg/mL of CPICs, and metastable Ca-P. The specimens were then prepared for scanning electron microscopy (SEM), transmission electron microscropy (TEM) imaging, a matrix metalloproteinases inhibition assay, and the micro-tensile bond strength test. To compare among the groups, one-way analysis of variance was performed. In the SEM imaging, with a rising concentration of CPICs, the degree of remineralization of dentin increased significantly. The metastable Ca-P treated specimens showed a similar level of remineralization as the 1 mg/mL CPICs treated specimens. The TEM imaging also revealed that dentin remineralization occurs in a CPICs concentration-dependent manner between the demineralized dentin and the resin layer. Furthermore, the results of micro-tensile bond strength showed the same trend as the results confirmed by SEM and TEM. We demonstrated that a 1 min pretreatment of CPICs or metastable Ca-P in etched dentin collagen fibril can achieve biomimetic remineralization and increase micro-tensile bond strength.

Effects of a biomimetic analog-based experimental bonding system on caries-affected and sound dentin

This study compared the ultrastructure, chemical composition, and proteases activity (PA) of sound (SD) and caries-affected dentin (CAD) in the dentin hybrid layer after using an experimental bonding system containing pyromellitic dianhydride glycerol methacrylate and biomimetic analogs. The bonding system used a three step and a total-etch procedure. Polyacrylic acid (5%) and sodium trimetaphosphate (5%) were added to the primer and monocalcium phosphate monohydrate (9%), beta-tricalcium phosphate (10.5%), and calcium hydroxide (0.5%) were added to the adhesive. Transmission electron microscopy (TEM) was used to evaluate the resultant structure, particularly the adhesive-dentin and the demineralized-SD interfaces. The chemical composition was evaluated through energy-dispersive X-ray spectroscopy (EDS) and selected area electron diffraction (SAED). The PA was measured with the Coomassie Blue-G250 coloring test, and the PA data were analyzed by ANOVA. EDS identified the presence of isolated calcium phosphate nanoparticles in the demineralized region; however, the SAED analysis did not show any evidences of hydroxyapatite (HA) neoformation in SD and CAD. The biomimetic analog-based adhesive system inhibited the activities of dentin proteases immediately after treatment. Additionally, the proteolytic activity on the affected dentin resembled that of the SD. In conclusion, no HA formed in the demineralized SD and CAD although there were calcium and phosphate deposits. The experimental adhesive system inhibited dentin proteases. The present study uses a new approach to investigate the hybrid layer behavior in dentin. The experimental adhesive system was synthesized and used on sound and affected-caries dentin as the substrate to reproduce real clinical conditions.

Nano-calcium phosphate and dimethylaminohexadecyl methacrylate adhesive for dentin remineralization in a biofilm-challenged environment

OBJECTIVE

Dentin remineralization at the bonded interface would protect it from external risk factors, therefore, would enhance the longevity of restoration and combat secondary caries. Dental biofilm, as one of the critical biological factors in caries formation, should not be neglected in the assessment of caries preventive agents. In this work, the remineralization effectiveness of demineralized human dentin in a multi-species dental biofilm environment via an adhesive containing nanoparticles of amorphous calcium phosphate (NACP) and dimethylaminohexadecyl methacrylate (DMAHDM) was investigated.

METHODS

Dentin demineralization was promoted by subjecting samples to a three-species acidic biofilm containing Streptococcus mutans, Streptococcus sanguinis, Streptococcus gordonii for 24h. Samples were divided into a control group, a DMAHDM adhesive group, an NACP group, and an NACP+DMAHDM adhesive group. A bonded model containing a control-bonded group, a DMAHDM-bonded group, an NACP-bonded group, and an NACP+DMAHDM-bonded group was also included in this study. All samples were subjected to a remineralization protocol consisting of 4-h exposure per 24-h period in brain heart infusion broth plus 1% sucrose (BHIS) followed by immersion in artificial saliva for the remaining period. The pH of BHIS after 4-h immersion was measured every other day. After 14 days, the biofilm was assessed for colony-forming unit (CFU) count, lactic acid production, live/dead staining, and calcium and phosphate content. The mineral changes in the demineralized dentin samples were analyzed by transverse microradiography.

RESULTS

The in vitro experiment results showed that the NACP+DMAHDM adhesive effectively achieved acid neutralization, decreased biofilm colony-forming unit (CFU) count, decreased biofilm lactic acid production, and increased biofilm calcium and phosphate content. The NACP+DMAHDM adhesive group had higher remineralization value than the NACP or DMAHDM alone adhesive group.

SIGNIFICANCE

The NACP+DMAHDM adhesive was effective in remineralizing dentin lesion in a biofilm model. It is promising to use NACP+DMAHDM adhesive to protect bonded interface, inhibit secondary caries, and prolong the longevity of restoration.

Effect of Chitosan as a Cross-Linker on Matrix Metalloproteinase Activity and Bond Stability with Different Adhesive Systems

The aim of the present study was to evaluate the effect of 0.1% chitosan (Ch) solution as an additional primer on the mechanical durability and enzymatic activity on dentine using an etch-and-rinse (E&R) adhesive and a universal self-etch (SE) adhesive. Microtensile bond strength and interfacial nanoleakage expression of the bonded interfaces for all adhesives (with or without pretreatment with 0.1% Ch solution for 1 min and air-dried for 5 s) were analyzed immediately and after 10,000 thermocycles. Zymograms of protein extracts from human dentine powder incubated with Optibond FL and Scotchbond Universal on untreated or Ch-treated dentine were obtained to examine dentine matrix metalloproteinase (MMP) activities. The use of 0.1% Ch solution as an additional primer in conjunction with the E&R or SE adhesive did not appear to have influenced the immediate bond strength (T0) or bond strength after thermocycling (T1). Zymography showed a reduction in MMP activities only for mineralized and demineralized dentine powder after the application of Ch. Application of 0.1% Ch solution does not increase the longevity of resin–dentine bonds. Nonetheless, the procedure appears to be proficient in reducing dentine MMP activities within groups without adhesive treatments. Further studies are required to comprehend the cross-linking of Ch with dentine collagen.

Effect of Using Biomimetic Analogs on Dentin Remineralization with Bioactive Cements

Abstract This study evaluated the impact of using biomimetic analogs (poly-acrylic acid and sodium tri-meta-phosphate) on dentin remineralization using two cement materials, the first is calcium silicate based and the second is calcium hydroxide based materials. Two standardized occlusal cavities (mesial and distal) were prepared within dentin after removal of occlusal enamel. Artificial demineralized dentin was induced through pH cycling (8 h in demineralizing and 16 h in remineralizing solutions). Demineralized cavities were divided into four groups; two groups received cement materials. The other groups were first treated with biomimetic analogs then restored with pulp cement materials. Teeth were sectioned buccolingually into two halves. Treated cavities with analogs were stored in simulated body fluid containing poly-acrylic acid. Untreated cavities were stored in simulated body fluid only. Ground unstained sections of demineralized dentin were examined using light microscope. Specimens were examined after 1, 6 and 12 weeks of storage using energy dispersive X-ray Spectroscopy (EDX) and Vickers microhardness was evaluated. Two-way ANOVA was used to analyze data statistically. Calcium silicate-based cement group with biomimetic analogs showed the highest statistically significant calcium and phosphorous wt% in addition to highest surface hardness values after 12 weeks of storage. Demineralized dentin ground sections showed increase in light zones after total period of storage. Calcium silicate-based cement showed the best ability to enrich the artificial carious dentin with ions for remineralization. Using biomimetic analogs had a significant impact on demineralized dentin surface hardness improvement.

Effects of oligopeptide simulating DMP-1/mineral trioxide aggregate/agarose hydrogel biomimetic mineralisation model for the treatment of dentine hypersensitivity

Dentine hypersensitivity (DH) occurs when dentine is exposed to stimuli from the oral environment due to a lack of enamel or cementum. The use of biomimetic mineralisation in occluding exposed dentinal tubules and regenerating enamel-like tissues on dentine surfaces is preferred for a long-lasting treatment. In this study, we established a biomimetic mineralisation model composed of oligopeptide stimulating dentine matrix protein 1 (DMP-1), mineral trioxide aggregate (MTA) and an agarose hydrogel biomimetic mineralisation model (AHBMM); the proposed model is thus referred to as DMP-1@MTA@AHBMM. The effectiveness of DMP-1@MTA@AHBMM for the management of DH was analysed with scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy and a microhardness test. The use of DMP-1@MTA@AHBMM on a demineralised dentine surface occluded the dentinal tubules and regenerated an enamel-like tissue containing well-defined fluoridated hydroxyapatite crystals on the dentine surface. The microhardness of the regenerated enamel-like tissue was greater than that of the demineralised dentine. Therefore, DMP-1@MTA@AHBMM can be a promising method for the management of DH.

Remineralization, Regeneration, and Repair of Natural Tooth Structure: Influences on the Future of Restorative Dentistry Practice

Currently, the principal strategy for the treatment of carious defects involves cavity preparations followed by the restoration of natural tooth structure with a synthetic material of inferior biomechanical and esthetic qualities and with questionable long-term clinical reliability of the interfacial bonds. Consequently, prevention and minimally invasive dentistry are considered basic approaches for the preservation of sound tooth structure. Moreover, conventional periodontal therapies do not always ensure predictable outcomes or completely restore the integrity of the periodontal ligament complex that has been lost due to periodontitis. Much effort and comprehensive research have been undertaken to mimic the natural development and biomineralization of teeth to regenerate and repair natural hard dental tissues and restore the integrity of the periodontium. Regeneration of the dentin-pulp tissue has faced several challenges, starting with the basic concerns of clinical applicability. Recent technologies and multidisciplinary approaches in tissue engineering and nanotechnology, as well as the use of modern strategies for stem cell recruitment, synthesis of effective biodegradable scaffolds, molecular signaling, gene therapy, and 3D bioprinting, have resulted in impressive outcomes that may revolutionize the practice of restorative dentistry. This Review covers the current approaches and technologies for remineralization, regeneration, and repair of natural tooth structure.

Dentin remineralization via adhesive containing amorphous calcium phosphate nanoparticles in a biofilm-challenged environment

OBJECTIVES

The remineralization of dentin at a bonded interface would help to strengthen the bonded interface and inhibit secondary caries, and would prolong the longevity of restoration. The aim of this study was to investigate the remineralization of demineralized human dentin in a dental biofilm environment via an adhesive containing nanoparticles of amorphous calcium phosphate (NACP).

METHODS

Dentin demineralization was promoted by subjecting samples to a Streptococcus mutans acidic biofilm for 24 h. Samples were divided into a control group, a commercial fluoride-releasing adhesive group, and an NACP adhesive group. All samples were subjected to a remineralization protocol consisting of 4-h exposure per 24-h period in brain heart infusion broth plus 1% sucrose (BHIS) followed by immersion in artificial saliva for the remaining period. The pH of BHIS after 4-h immersion was measured every other day. After 10 days, the biofilm was assessed for colony-forming unit (CFU) count, lactic acid production, live/dead staining, and calcium and phosphate content. The mineral changes in the demineralized dentin samples were analyzed by transverse microradiography, hardness measurement, X-ray diffraction characterization, and scanning electron microscopy.

RESULTS

The NACP adhesive achieved acid neutralization, decreased biofilm CFU count, decreased biofilm lactic acid production, and increased biofilm calcium and phosphate content (P < 0.05). The NACP adhesive group had higher remineralization value than the commercial fluoride-releasing adhesive group (P < 0.05).

CONCLUSIONS

The NACP adhesive was effective in remineralizing dentin lesions in a biofilm model. Its ability to protect bond interface, inhibit secondary caries, and prolong the longevity of restoration is promising.

CLINICAL SIGNIFICANCE

Using NACP-containing adhesives could be recommended because of the protective ability of its hybrid layer even under a biofilm-challenged environment.

Dental remineralization via poly(amido amine) and restorative materials containing calcium phosphate nanoparticles

Tooth decay is prevalent, and secondary caries causes restoration failures, both of which are related to demineralization. There is an urgent need to develop new therapeutic materials with remineralization functions. This article represents the first review on the cutting edge research of poly(amido amine) (PAMAM) in combination with nanoparticles of amorphous calcium phosphate (NACP). PAMAM was excellent nucleation template, and could absorb calcium (Ca) and phosphate (P) ions via its functional groups to activate remineralization. NACP composite and adhesive showed acid-neutralization and Ca and P ion release capabilities. PAMAM+NACP together showed synergistic effects and produced triple benefits: excellent nucleation templates, superior acid-neutralization, and ions release. Therefore, the PAMAM+NACP strategy possessed much greater remineralization capacity than using PAMAM or NACP alone. PAMAM+NACP achieved dentin remineralization even in an acidic solution without any initial Ca and P ions. Besides, the long-term remineralization capability of PAMAM+NACP was established. After prolonged fluid challenge, the immersed PAMAM with the recharged NACP still induced effective dentin mineral regeneration. Furthermore, the hardness of pre-demineralized dentin was increased back to that of healthy dentin, indicating a complete remineralization. Therefore, the novel PAMAM+NACP approach is promising to provide long-term therapeutic effects including tooth remineralization, hardness increase, and caries-inhibition capabilities.

Polymer conjugation optimizes EDTA as a calcium-chelating agent that exclusively removes extrafibrillar minerals from mineralized collagen

During development of mineralized collagenous tissues, intrafibrillar mineralization is achieved by preventing mineralization precursor inhibitors that are larger than 40 kDa from entering the collagen fibrils. Such a property is incorporated in the design of a calcium chelator for dentin bonding in the etch-and-rinse technique that selectively demineralizes extrafibrillar apatite while leaving the intrafibrillar minerals intact. This strategy prevents complete demineralization of collagen fibrils, avoids collapse of collagen that blocks resin infiltration after air-drying, and protects the completely demineralized fibrils from bacteria colonization and degradation by endogenous proteases after resin bonding. In the present study, a water-soluble glycol chitosan-EDTA (GCE) conditioner was synthesized by conjugation of EDTA, an effective calcium chelator, to high molecular weight glycol chitosan, which exhibits weak chelation property. The GCE conjugate was purified, characterized by FTIR, ¹H NMR, isothermal titration calorimetry and ICP-AES, and subjected to size exclusion dialysis to recover molecules that are >40 kDa. The optimal concentration and application time for etching dentin were determined by bond strength testing to ensure that the dentin bonding results were comparable to phosphoric acid etching, and maintained equivalent bond strength after air-drying of the conditioned collagen matrix. Extrafibrillar demineralization was validated with transmission electron microscopy. Inhibition of endogenous dentin proteases was confirmed using in-situ zymography. The water-soluble GCE dentin conditioner was non-cytotoxic and possessed antibacterial activities against planktonic and single-species biofilms, supporting its ongoing development as a dentin conditioner with air-drying, anti-proteolytic and antibacterial properties to enhance the durability of bonds created using the etch-and-rinse bonding technique. STATEMENT OF SIGNIFICANCE: The current state-of-the-art techniques for filling decayed teeth with plastic tooth-colored materials require conditioning the mineralized, biofilm-covered, decayed dentin with acids or acid resin monomers to create a surface layer of completely- or partially-demineralized collagen matrix for the infiltration of adhesive resin monomers. Nevertheless, fillings prepared using these strategies are not as durable as consumers have anticipated. Conjugation of polymeric glycol chitosan with EDTA produces a new conditioner for dentin bonding that demineralizes only extrafibrillar dentin, reduces endogenous protease activities and kills biofilm bacteria. The high molecular weight glycol chitosan-EDTA is non-cytotoxic to the key regenerative players within the dentin-pulp complex. This advance permits dry bonding and the use of hydrophobic resins.

Poly(amido amine) and rechargeable adhesive containing calcium phosphate nanoparticles for long-term dentin remineralization

OBJECTIVES

The objective of the present study was to investigate long-term dentin remineralization via the combination of poly(amido amine) (PAMAM) with a novel rechargeable adhesive containing nanoparticles of amorphous calcium phosphate (NACP).

METHODS

The NACP adhesive was immersed in lactic acid at pH 4 to exhaust its calcium (Ca) and phosphate (P) ion release, and then recharged with Ca and P ions. Dentin samples were pre-demineralized with 37% phosphoric acid, and then divided into four groups: (1) dentin control, (2) dentin treated with PAMAM, (3) dentin with recharged NACP adhesive, (4) dentin with PAMAM + recharged NACP adhesive. In group (2) and (4), the PAMAM-coated dentin was immersed in phosphate-buffered saline with vigorous shaking for 77 days to accelerate any detachment of the PAMAM macromolecules from the demineralized dentin. Samples were treated with a cyclic remineralization/demineralization regimen for 21 days.

RESULTS

After 77 days of fluid flow challenge, the immersed PAMAM still retained its nucleation template function. The recharged NACP adhesive possessed sustained ion re-release and acid-neutralization capability, both of which did not decrease with repeated recharge and re-release cycles. The immersed PAMAM with the recharged NACP adhesive achieved long-term dentin remineralization, and restored dentin hardness to that of healthy dentin.

CONCLUSIONS

The PAMAM + NACP adhesive completely remineralizes pre-demineralized dentin even after long-term fluid challenges and provides long-term remineralization to protect tooth structures.

CLINICAL SIGNIFICANCE

The novel PAMAM + NACP adhesive provides long-term bond protection and caries inhibition to increase the longevity of resin-based restorations.

Contribution of biomimetic collagen-ligand interaction to intrafibrillar mineralization

Contemporary models of intrafibrillar mineralization mechanisms are established using collagen fibrils as templates without considering the contribution from collagen-bound apatite nucleation inhibitors. However, collagen matrices destined for mineralization in vertebrates contain bound matrix proteins for intrafibrillar mineralization. Negatively charged, high-molecular weight polycarboxylic acid is cross-linked to reconstituted collagen to create a model for examining the contribution of collagen-ligand interaction to intrafibrillar mineralization. Cryogenic electron microscopy and molecular dynamics simulation show that, after cross-linking to collagen, the bound polyelectrolyte caches prenucleation cluster singlets into chain-like aggregates along the fibrillar surface to increase the pool of mineralization precursors available for intrafibrillar mineralization. Higher-quality mineralized scaffolds with better biomechanical properties are achieved compared with mineralization of unmodified scaffolds in polyelectrolyte-stabilized mineralization solution. Collagen-ligand interaction provides insights on the genesis of heterogeneously mineralized tissues and the potential causes of ectopic calcification in nonmineralized body tissues.

Phosphorylated chitosan to promote biomimetic mineralization of type I collagen as a strategy for dentin repair and bone tissue engineering

This novel biomimetic mineralization technique provides an efficient method to produce an advanced mineralized matrix.

Bonding durability, antibacterial activity and biofilm pH of novel adhesive containing antibacterial monomer and nanoparticles of amorphous calcium phosphate

OBJECTIVES

The dentin bonding often fails over time, leading to secondary caries and restoration failure. The objectives of this study were to develop an adhesive with dimethylaminohexadecyl methacrylate (DMAHDM) and nanoparticles of amorphous calcium phosphate (NACP), and investigate the effects of storage in artificial saliva for six months on the bonding durability, antibacterial activity, ion release and biofilm pH properties for the first time.

METHODS

DMAHDM was added at 5% (by mass) to Scotchbond Primer and Adhesive (SBMP). NACP was added at 10%, 20%, and 30% to SBMP adhesive. Dentin bonding durability, antibacterial activity against Streptococcus mutans biofilms, and calcium (Ca) and phosphate (P) ion liberation properties were investigated after 1 day and 6months of storage in artificial saliva.

RESULTS

Dentin bond strength (n = 50) had 25% loss after 6 months of aging for SBMP control. However, SBMP + DMAHDM+10NACP and SBMP + DMAHDM+20NACP showed no loss in bond strength after storage in artificial saliva for 6 months. The DMAHDM + NACP incorporation method dramatically reduced the biofilm metabolic activity and acid production, and decreased the biofilm CFU by four orders of magnitude, compared to SBMP control, even after 6 months of aging (p < 0.05). DMAHDM + NACP had long-lasting Ca and P ion releases, and raised the biofilm pH to 6.8, while the control group had a cariogenic biofilm pH of 4.5.

CONCLUSIONS

Incorporating DMAHDM + NACP in bonding agent yielded potent and long-lasting antibacterial activity and ions liberation ability, and much higher long-term dentin bond strength after 6-month of aging. The new bonding agent is promising to inhibit caries at the restoration margins and increase the resin-dentin bonding longevity.

CLINICAL SIGNIFICANCE

The novel bioactive adhesive is promising to protect tooth structures from biofilm acids and secondary caries. NACP and DMAHDM have great potential for applications to a wide range of dental materials to reduce plaque and achieve therapeutic effects.

Cellular differentiation, bioactive and mechanical properties of experimental light-curing pulp protection materials

OBJECTIVE

Materials for pulp protection should have therapeutic properties in order to stimulate remineralization and pulp reparative processes. The aim of this study was to evaluate the mechanical properties, biocompatibility, cell differentiation and bioactivity of experimental light-curable resin-based materials containing bioactive micro-fillers.

METHODS

Four calcium-phosphosilicate micro-fillers were prepared and incorporated into a resin blend: 1) Bioglass 45S5 (BAG); 2) zinc-doped bioglass (BAG-Zn); 3) βTCP-modified calcium silicate (β-CS); 4) zinc-doped β-CS (β-CS-Zn). These experimental resins were tested for flexural strength (FS) and fracture toughness (FT) after 24h and 30-day storage in simulated body fluid (SBF). Cytotoxicity was evaluated using MTT assay, while bioactivity was evaluated using mineralization and gene expression assays (Runx-2 & ALP).

RESULTS

The lowest FS and FT at 24h was attained with β-CS resin, while all the other tested materials exhibited a decrease in FS after prolonged storage in SBF. β-CS-Zn maintained a stable FT after 30-day SBF aging. Incorporation of bioactive micro-fillers had no negative effect on the biocompatibility of the experimental materials tested in this study. The inclusion of zinc-doped fillers significantly increased the cellular remineralization potential and expression of the osteogenic genes Runx2 and ALP (p<0.05).

SIGNIFICANCE

The innovative materials tested in this study, in particular those containing β-CS-Zn and BAG-Zn may promote cell differentiation and mineralization. Thus, these materials might represent suitable therapeutic pulp protection materials for minimally invasive and atraumatic restorative treatments.

Nanomagnetic-mediated drug delivery for the treatment of dental disease

Maintaining the vitality of the dental pulp, the highly innervated and highly vascular, innermost layer of the tooth, is a critical goal of any dental procedure. Upon injury, targeting the pulp with specific therapies is challenging because it is encased in hard tissues. This project describes a method that can effectively deliver therapeutic agents to the pulp. This method relies on the use of nanoparticles that can be actively steered using magnetic forces to the pulp, traveling through naturally occurring channels in the dentin (the middle layer of the tooth). This method can reduce the inflammation of injured pulp and improve the penetration of dental adhesives into dentin. Such a delivery method would be less expensive, and both less painful and less traumatic than existing therapeutic options available for treatment of injured dental pulp. This technique would be simple and could be readily translated to clinical use.

Poly (amido amine) dendrimer and dental adhesive with calcium phosphate nanoparticles remineralized dentin in lactic acid

Patients with dry mouth often have an acidic oral environment lacking saliva to provide calcium (Ca) and phosphate (P) ions. There has been no report on tooth remineralization in acidic pH4 and CaP ion-lacking solutions. The objective of this study was to develop a novel method of combining poly(amido amine) (PAMAM) with adhesive containing nanoparticles of amorphous calcium phosphate (NACP) for dentin remineralization in pH4 and CaP-lacking solution for the first time. Demineralized dentin was tested in four groups: (1) dentin control, (2) dentin with PAMAM, (3) dentin with NACP adhesive, (4) dentin with PAMAM + NACP adhesive. Dentin samples were examined by scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS) and hardness testing. Increasing the NACP filler level in adhesive from 0 to 40 wt% did not negatively affect the dentin bond strength (p > 0.1). NACP adhesive released CaP ions and neutralized the acid. PAMAM alone failed to achieve dentin remineralization in lactic acid. NACP alone induced slight dentin remineralization in lactic acid (p > 0.1). In contrast, the novel PAMAM + NACP group in the pH4 and CaP-lacking solution completely remineralized the predemineralized dentin, increasing its hardness which approached that of healthy dentin (p > 0.1). In conclusion, dentin remineralization via PAMAM + NACP adhesive in pH4 and CaP-lacking acid was achieved for the first time, when conventional remineralization methods such as PAMAM or NACP did not work. The novel PAMAM + NACP method is promising to increase the longevity of the composite-tooth bond, inhibit caries, remineralize lesions and protect tooth structures, even for patients with dry mouth and an acidic oral environment. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2414-2424, 2018.

The remineralization effectiveness of PAMAM dendrimer with different terminal groups on demineralized dentin in vitro

The aim of this study was to examine the dentin remineralization extent that poly(amido amine) (PAMAM) induces quantitatively, and select the most effective kind of PAMAM with a certain terminal group for dentin remineralization, both for the first time.

Intrafibrillar mineralization of polyacrylic acid-bound collagen fibrils using a two-dimensional collagen model and Portland cement-based resins

The biomimetic remineralization of apatite-depleted dentin is a potential method for enhancing the durability of resin-dentin bonding. To advance this strategy from its initial proof-of-concept design, we sought to investigate the characteristics of polyacrylic acid (PAA) adsorption to desorption from type I collagen and to test the mineralization ability of PAA-bound collagen. Portland cement and β-tricalcium phosphate (β-TCP) were homogenized with a hydrophilic resin blend to produce experimental resins. The collagen fibrils reconstituted on nickel (Ni) grids were mineralized using different methods: (i) group I consisted of collagen treated with Portland cement-based resin in simulated body fluid (SBF); (ii) group II consisted of PAA-bound collagen treated with Portland cement-based resin in SBF; and (iii) group III consisted of PAA-bound collagen treated with β-TCP-doped Portland cement-based resin in deionized water. Intrafibrillar mineralization was evaluated using transmission electron microscopy. We found that a carbonyl-associated peak at pH 3.0 increased as adsorption time increased, whereas a hydrogen bond-associated peak increased as desorption time increased. The experimental resins maintained an alkaline pH and the continuous release of calcium ions. Apatite was detected within PAA-bound collagen in groups II and III. Our results suggest that PAA-bound type I collagen fibrils can be mineralized using Portland cement-based resins.

Poly (amido amine) and nano-calcium phosphate bonding agent to remineralize tooth dentin in cyclic artificial saliva/lactic acid

The objectives of this study were to develop a novel method to remineralize dentin lesions, and investigate the remineralization effects of poly (amido amine) (PAMAM) dendrimer plus a bonding agent with nanoparticles of amorphous calcium phosphate (NACP) in a cyclic artificial saliva/lactic acid environment for the first time. Dentin lesions were produced via phosphoric acid. Four groups were tested: (1) dentin control, (2) dentin with PAMAM, (3) dentin with NACP bonding agent, and (4) dentin with PAMAM plus NACP bonding agent. Specimens were treated with cyclic artificial saliva/lactic acid. The remineralized dentin was examined using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), hardness and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). NACP bonding agent yielded a dentin shear bond strength similar to commercial controls (Prime & Bond NT, Dentsply; Scotchbond Multi-purpose, 3M) (p>0.1). Increasing NACP in bonding agent from 0 to 40% did not affect bond strength. NACP bonding agent neutralized the acid and released Ca ions with concentrations of 4 to 20mmol/L, and P ions of 2 to 9mmol/L. PAMAM or NACP bonding agent alone achieved slight remineralization. The PAMAM+NACP group achieved the greatest dentin remineralization p<0.05). At 20days, PAMAM+NACP increased the hardness of pre-demineralized dentin to reach the normal dentin hardness (p>0.1). In conclusion, superior remineralization of PAMAM+NACP bonding agent was demonstrated for the first time. PAMAM+NACP bonding agent induced dentin remineralization under acid challenge, when conventional remineralization methods such as PAMAM alone did not work well. The novel PAMAM+NACP bonding agent method is promising to improve the longevity of resin-dentin bonds, inhibit caries, and protect teeth.

In vitro remineralization of hybrid layers using biomimetic analogs

Resin-dentin bond degradation is a major cause of restoration failures. The major aim of the current study was to evaluate the impact of a remineralization medium on collagen matrices of hybrid layers of three different adhesive resins using nanotechnology methods. Coronal dentin surfaces were prepared from freshly extracted premolars and bonded to composite resin using three adhesive resins (FluoroBond II, Xeno-III-Bond, and iBond). From each tooth, two central slabs were selected for the study. The slabs used as controls were immersed in a simulated body fluid (SBF). The experimental slabs were immersed in a Portland cement-based remineralization medium that contained two biomimetic analogs (biomineralization medium (BRM)). Eight slabs per group were retrieved after 1, 2, 3, and 4 months, respectively and immersed in Rhodamine B for 24 h. Confocal laser scanning microscopy was used to evaluate the permeability of hybrid layers to Rhodamine B. Data were analyzed by analysis of variance (ANOVA) and Tukey's honest significant difference (HSD) tests. After four months, all BRM specimens exhibited a significantly smaller fluorescent area than SBF specimens, indicating a remineralization of the hybrid layer (P≤0.05). A clinically applicable biomimetic remineralization delivery system could potentially slow down bond degradation.

Synergistic intrafibrillar/extrafibrillar mineralization of collagen scaffolds based on a biomimetic strategy to promote the regeneration of bone defects

The mineralization of collagen scaffolds can improve their mechanical properties and biocompatibility, thereby providing an appropriate microenvironment for bone regeneration. The primary purpose of the present study is to fabricate a synergistically intra- and extrafibrillar mineralized collagen scaffold, which has many advantages in terms of biocompatibility, biomechanical properties, and further osteogenic potential. In this study, mineralized collagen scaffolds were fabricated using a traditional mineralization method (ie, immersed in simulated body fluid) as a control group and using a biomimetic method based on the polymer-induced liquid precursor process as an experimental group. In the polymer-induced liquid precursor process, a negatively charged polymer, carboxymethyl chitosan (CMC), was used to stabilize amorphous calcium phosphate (ACP) to form nanocomplexes of CMC/ACP. Collagen scaffolds mineralized based on the polymer-induced liquid precursor process were in gel form such that nanocomplexes of CMC/ACP can easily be drawn into the interstices of the collagen fibrils. Scanning electron microscopy and transmission electron microscopy were used to examine the porous micromorphology and synergistic mineralization pattern of the collagen scaffolds. Compared with simulated body fluid, nanocomplexes of CMC/ACP significantly increased the modulus of the collagen scaffolds. The results of in vitro experiments showed that the cell count and differentiated degrees in the experimental group were higher than those in the control group. Histological staining and micro-computed tomography showed that the amount of new bone regenerated in the experimental group was larger than that in the control group. The biomimetic mineralization will assist us in fabricating a novel collagen scaffold for clinical applications.

Improved secondary caries resistance via augmented pressure displacement of antibacterial adhesive

The present in vitro study evaluated the secondary caries resistance potential of acid-etched human coronal dentin bonded using augmented pressure adhesive displacement in conjunction with an experimental antibacterial adhesive. One hundred and twenty class I cavities were restored with a commercial non-antibacterial etch-and-rinse adhesive (N) or an experimental antibacterial adhesive (A) which was displaced by gentle air-blow (G) or augmented pressure air-blow (H). After bonding and restoration with resin composite, the resulted 4 groups (N-G, N-H, A-G and A-H) were exposed to Streptococcus mutans biofilm for 4, 8, 15, 20 or 25 days. The development of secondary caries in the bonding interface was then examined by confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). Data acquired from 15, 20 and 25 days of artificial caries induction were analyzed with three-way ANOVA at α = 0.05. The depth of the artificial carious lesions was significantly affected by “adhesive type” (Single Bond 2 vs experimental antibacterial adhesive p = 0.003), “intensity of adhesive displacement” (gentle vs augmented-pressure adhesive displacement; p < 0.001), as well as “artificial caries induction time” (p < 0.001). The combined use of augmented pressure adhesive displacement and experimental antibacterial adhesive reduces the progression of secondary caries.

A rapid, efficient, and facile solution for dental hypersensitivity: The tannin-iron complex

Dental hypersensitivity due to exposure of dentinal tubules under the enamel layer to saliva is a very popular and highly elusive technology priority in dentistry. Blocking water flow within exposed dentinal tubules is a key principle for curing dental hypersensitivity. Some salts used in "at home" solutions remineralize the tubules inside by concentrating saliva ingredients. An "in-office" option of applying dense resin sealants on the tubule entrance has only localized effects on well-defined sore spots. We report a self-assembled film that was formed by facile, rapid (4 min), and efficient (approximately 0.5 g/L concentration) dip-coating of teeth in an aqueous solution containing a tannic acid-iron(III) complex. It quickly and effectively occluded the dentinal tubules of human teeth. It withstood intense tooth brushing and induced hydroxyapatite remineralisation within the dentinal tubules. This strategy holds great promise for future applications as an effective and user-friendly desensitizer for managing dental hypersensitivity.

Dentin bonding: can we make it last?

In dentin bonding, contemporary dental adhesive systems rely on formation of the hybrid layer, a biocomposite containing dentin collagen and polymerized resin adhesive. They are usually able to create at least reasonable integrity of the hybrid layer with high immediate bond strength. However, loss of dentin-bonded interface integrity and bond strength is commonly seen after aging both in vitro and in vivo. This is due to endogenous collagenolytic enzymes, matrix metalloproteinases, and cysteine cathepsins, responsible for the time-dependent loss of hybrid layer collagen. In addition, the hydrophilic nature of adhesive systems creates problems that lead to suboptimal hybrid layers. These problems include, for example, insufficient resin impregnation of dentin, phase separation, and a low rate of polymerization, all of which may reduce the longevity of the bonded interface. Preservation of the collagen matrix integrity by inhibition of endogenous dentin proteases is key to improving dentin bonding durability. Several approaches to retain the integrity of the hybrid layer and to improve the long-term dentin bond strength have been tested. These include the use of enzyme inhibitors, either separately or as incorporated into the adhesive resins; increase of collagen resistance to enzymatic degradation; and elimination of water from the interface to slow down or eliminate hydrolytic loss of the hybrid layer components. This review looks at the principles, current status, and future of the different techniques designed to prevent the loss of hybrid layer and bond strength.

Importance of age on the dynamic mechanical behavior of intertubular and peritubular dentin

An experimental evaluation of human coronal dentin was performed using nanoscopic dynamic mechanical analysis (nanoDMA). The primary objectives were to quantify any unique changes in mechanical behavior of intertubular and peritubular dentin with age, and to evaluate the microstructure and mechanical behavior of the mineral deposited within the lumens. Specimens of coronal dentin were evaluated by nanoDMA using single indents and in scanning mode via scanning probe microscopy. Results showed that there were no significant differences in the storage modulus or complex modulus between the two age groups (18-25 versus 54-83 yrs) for either the intertubular or peritubular tissue. However, there were significant differences in the dampening behavior between the young and old dentin, as represented in the loss modulus and tanδ responses. For both the intertubular and peritubular components, the capacity for dampening was significantly lower in the old group. Scanning based nanoDMA showed that the tubules of old dentin exhibit a gradient in elastic behavior, with decrease in elastic modulus from the cuff to the center of tubules filled with newly deposited mineral.

Biomimetic promotion of dentin remineralization usingl-glutamic acid: inspiration from biomineralization proteins

The decalcified dentin layer was remineralized in two days using the cooperative effect of PAA and Glu.