Osteogenic and angiogenic potentials of monocultured and co-cultured human-bone-marrow-derived mesenchymal stem cells and human-umbilical-vein endothelial cells on three-dimensional porous beta-tricalcium phosphate scaffold

Calcium Phosphates: A Key to Next-Generation In Vitro Bone Modeling

The replication of bone physiology under laboratory conditions is a prime target behind the development of in vitro bone models. The model should be robust enough to elicit an unbiased response when stimulated experimentally, giving reproducible outcomes. In vitro bone tissue generation majorly requires the availability of cellular components, the presence of factors promoting cellular proliferation and differentiation, efficient nutrient supply, and a supporting matrix for the cells to anchor - gaining predefined topology. Calcium phosphates (CaP) are difficult to ignore while considering the above requirements of a bone model. Therefore, the current review focuses on the role of CaP in developing an in vitro bone model addressing the prerequisites of bone tissue generation. Special emphasis is given to the physico-chemical properties of CaP that promote osteogenesis, angiogenesis and provide sufficient mechanical strength for load-bearing applications. Finally, the future course of action is discussed to ensure efficient utilization of CaP in the in vitro bone model development field.

Effects of the multiscale porosity of decellularized platelet-rich fibrin-loaded zinc-doped magnesium phosphate scaffolds in bone regeneration

In recent years, metallic ion-doped magnesium phosphate (MgP)-based degradable bioceramics have emerged as alternative bone substitute materials owing to their excellent biocompatibility, bone-forming ability, bioactivity, and controlled degradability. Conversely, incorporating a biomolecule such as decellularized platelet-rich fibrin (d-PRF) on scaffolds has certain advantages for bone tissue regeneration, particularly in enhanced osteogenesis and angiogenesis. The present study focuses on the impact of d-PRF-loaded multiscale porous zinc-doped magnesium phosphate (Zn-MgP) scaffolds on biodegradability, biocompatibility, and bone regeneration. Scaffolds were fabricated through the powder-metallurgy route utilizing naphthalene as a porogen (porosity = 5-43%). With the inclusion of a higher porogen, a higher fraction of macro-porosity (>20 μm) and pore interconnectivity were observed. X-ray diffraction (XRD) studies confirmed the formation of the farringtonite phase. The developed scaffolds exhibited a minimum ultimate compressive strength (UCS) of 8.5 MPa (for 40 Naph), which lies within the range of UCS of the cancellous bone of humans (2-12 MPa). The in vitro assessment via immersion in physiological fluid yielded a higher deposition of the calcium phosphate (CaP) compound in response to increased macro-porosity and interconnectivity (40 Naph). Cytocompatibility assessed using MC3T3-E1 cells showed that the incorporation of d-PRF coupled with increased porosity resulted the highest cell attachment, proliferation, and viability. For further evaluation, the developed scaffolds were implanted in in vivo rabbit femur condylar defects. Radiography, SEM, OTC labelling, and histology analysis after 2 months of implantation revealed the better invasion of mature osteoblastic cells into the scaffolds with enhanced angiogenesis and superior and accelerated healing of bone defects in d-PRF-incorporated higher porosity scaffolds (40 Naph). Finally, it is hypothesized that the combination of d-PRF incorporation with multiscale porosity and increased interconnectivity facilitated better bone-forming ability, good biocompatibility, and controlled degradability within and around the Zn-doped MgP scaffolds.

Enhancing the Repair of Substantial Volumetric Muscle Loss by Creating Different Levels of Blood Vessel Networks Using Pre-Vascularized Nerve Hydrogel Implants

Volumetric muscle loss (VML), a severe muscle tissue loss from trauma or surgery, results in scarring, limited regeneration, and significant fibrosis, leading to lasting reductions in muscle mass and function. A promising approach for VML recovery involves restoring vascular and neural networks at the injury site, a process not extensively studied yet. Collagen hydrogels have been investigated as scaffolds for blood vessel formation due to their biocompatibility, but reconstructing blood vessels and guiding innervation at the injury site is still difficult. In this study, collagen hydrogels with varied densities of vessel-forming cells are implanted subcutaneously in mice, generating pre-vascularized hydrogels with diverse vessel densities (0-145 numbers/mm2) within a week. These hydrogels, after being transplanted into muscle injury sites, are assessed for muscle repair capabilities. Results showed that hydrogels with high microvessel densities, filling the wound area, effectively reconnected with host vasculature and neural networks, promoting neovascularization and muscle integration, and addressing about 63% of the VML.

Branched Channels in Porous β-Tricalcium Phosphate Scaffold Promote Vascularization

Rapid and efficient vascularization is still considerably challenging for a porous β-tricalcium phosphate (β-TCP) scaffold to achieve. To overcome this challenge, branched channels were created in the porous β-TCP scaffold by using 3D printing and a template-casting method to facilitate the instant flow of blood supply. Human bone mesenchymal stem cells (hBMSCs) and human umbilical vein endothelial cells (HUVECs) were seeded in the channeled porous scaffolds and characterized through a double-stranded DNA (dsDNA) assay, alkaline phosphatase (ALP) assay, and cell migration. Channeled porous β-TCP scaffolds were then implanted in the subcutaneous pockets of mice. Histological staining and immunohistochemical staining on vascularization and bone-related markers were carried out on the embedded paraffin sections. Results from in vitro experiments showed that branched channels significantly promoted HUVECs' infiltration, migration, proliferation, and angiogenesis, and also promoted the proliferation and osteogenesis differentiation of hBMSCs. In vivo implantation results showed that, in the early stage after implantation, cells significantly migrated into branched channeled scaffolds. More matured blood vessels formed in the branched channeled scaffolds compared to that in nonchanneled and straight channeled scaffolds. Beside promoting vascularization, the branched channels also stimulated the infiltration of bone-related cells into the scaffolds. These results suggested that the geometric design of branched channels in the porous β-TCP scaffold promoted rapid vascularization and potentially stimulated bone cells recruitment.

Dose-dependent effects of zoledronic acid on the osteogenic differentiation of human bone marrow stem cells (hBMSCs)

Recent studies have shown that bisphosphonates can also impact osteoblasts besides osteoclasts. This study aimed to evaluate the effects of different concentrations of Zoledronic acid (ZA) during the osteogenic differentiation of human Bone Marrow Stem Cells (hBMSCs) in vitro. Thus, osteogenic differentiation of hBMSCs was conducted with different concentrations of Zoledronic Acid (ZA) (0, 0.1, 1.0, and 5.0 μM) for the first 3 days. Cell metabolism was quantified at 1-, 3-, 7-, and 14 days. At 7- and 14-days, the following analyses were performed: 1) mineralization nodule assay, 2) LIVE/DEAD™, 3) cell adhesion and spreading, 4) alkaline phosphatase (ALP) activity, and 5) qPCR analysis for RUNX-2), ALPL, and COL1 A1. Data were analyzed by ANOVA 2-way, followed by Tukey's post hoc test (p < 0.05). Cell metabolism (3-, 7-, and 14-days) (p < 0.001), mineralization (7-, 14-days) (p < 0.001), and ALP activity (14-days) (p < 0.001) were reduced in ZA 5.0 µM when compared to control (no ZA). Also, ZA 5.0 µM downregulated the expression of RUNX2 at 7- and 14-days (p < 0.001). It is possible to conclude that ZA (5.0 µM) can impair hBMSC differentiation into osteoblasts and interferes with its mineralization phase.

Early osteoimmunomodulation by mucin hydrogels augments the healing and revascularization of rat critical-size calvarial bone defects

The design principle of osteogenic bone grafts has shifted from immunological inertness to limiting foreign body response to combined osteoimmunomodulatory activity to promote high-quality endogenous bone regeneration. Recently developed immunomodulatory mucin hydrogels have been shown to elicit very low complement activation and suppress macrophage release and activation after implantation in vivo. However, their immunoregulatory activity has not yet been studied in the context of tissue repair. Herein, we synthesized mucin-monetite composite materials and investigated their early osteoimmunomodulation using a critical-size rat bone defect model. We demonstrated that the composites can polarize macrophages towards the M2 phenotype at weeks 1 and 2. The early osteoimmunomodulation enhanced early osteogenesis and angiogenesis and ultimately promoted fracture healing and engraftment (revascularization of the host vasculature) at weeks 6 and 12. Overall, we demonstrated the applicability of mucin-based immunomodulatory biomaterials to enhance tissue repair in tissue engineering and regenerative medicine.

Biofabricating the vascular tree in engineered bone tissue

The development of tissue engineering strategies for treatment of large bone defects has become increasingly relevant, given the growing demand for bone substitutes. Native bone is composed of a dense vascular network necessary for the regulation of bone development, regeneration and homeostasis. A major obstacle in fabricating living, clinically relevant-sized bone mimics (1-10 cm³) is the limited supply of nutrients, including oxygen to the core of the construct. Therefore, strategies to support vascularization are pivotal for the development of tissue engineered bone constructs. Creating a functional bone construct integrated with a vascular network, capable of delivering the necessary nutrients for optimal tissue development is imperative for translation into the clinics. The vascular system is composed of a complex network that runs throughout the body in a tree-like hierarchical branching fashion. A significant challenge for tissue engineering approaches lies in mimicking the intricate, multi-scale structures consisting of larger vessels (macro-vessels) which interconnect with multiple sprouting vessels (microvessels) in a closed network. The advent of biofabrication has enabled complex, out of plane channels to be generated and has laid the groundwork for the creation of multi-scale vasculature in recent years. This review highlights the key state-of-the-art achievements for the development of vascular networks of varying scales in the field of biofabrication with a particular focus for its application in developing a functional tissue engineered bone construct. STATEMENT OF SIGNIFICANCE: There is a growing need for bone substitutes to overcome the limited supply of patient-derived bone. Bone tissue engineering aims to overcome this by combining stem cells with scaffolds to restore missing bone. The current bottleneck in upscaling is the lack of an integrated vascular network, required for the delivery of nutrients to cells. 3D bioprinting techniques has enabled the creation of complex hollow structures of varying dimensions that resemble native blood vessels. The convergence of multiple materials, cell types and fabrication approaches, opens the possibility of developing clinically-relevant sized vascularized bone constructs. This review provides an up-to-date insight of the technologies currently available for the generation of complex vascular networks, with a focus on their application in bone tissue engineering.

Photobiomodulation therapy at red and near-infrared wavelengths for osteogenic differentiation in the scaffold-free microtissues

One of the novel strategies for bone tissue regeneration is photobiomodulation (PBM) which depends on the red and near-infrared light absorption by mitochondria and may trigger bone tissue regeneration via the production of intracellular ROS and ATP, NO release, etc. It is also important to identify the changes in those signal molecule levels in an in vivo mimicking platform such as 3-Dimensional (3D) Scaffold Free Microtissues (SFMs) that may serve more natural osteogenic differentiation responses to PBM. Herein, we aimed to increase the osteogenic differentiation capability of the co-culture of Human Bone Marrow Stem Cells (hBMSC) and Human Umbilical Vein Endothelial Cells (HUVECs) on 3D SFMs by triple light treatment at 655 and 808-nm of wavelengths with the energy densities of 1, 3, and 5 J/cm². We performed the analysis of cell viability, diameter measurements of SFMs, intracellular ROS production, NO release, ATP activity, temperature measurements, DNA content, ALPase activity, calcium content, and relative gene expressions of ALP, Collagen, and Osteopontin by qRT-PCR. It was found that both wavelengths were effective in terms of the viability of SFMs. 1 and 5 J/cm² energy densities of both wavelengths increased the SFM diameter with significant changes in intracellular ROS, ATP, and NO levels compared to the control group. We concluded that PBM therapy was successful to induce osteogenesis. 1 J/cm² at 655 nm of wavelength and 5 J/cm² at 808 nm of wavelength were the most effective energy densities for osteogenic differentiation on SFMs with triple light treatment.

Bone Beads Enveloped with Vascular Endothelial Cells for Bone Regenerative Medicine

The transplantation of pre-vascularized bone grafts is a promising strategy to improve the efficacy of engraftment and bone regeneration. We propose a hydrogel microbead-based approach for preparing vascularized and high-density tissue grafts. Mesenchymal stem cell-encapsulated collagen microgels (2 µL), termed bone beads, were prepared through spontaneous constriction, which improved the density of the mesenchymal stem cells and collagen molecules by more than 15-fold from the initial day of culture. Constriction was attributed to cell-attractive forces and involved better osteogenic differentiation of mesenchymal stem cells than that of spheroids. This approach was scalable, and ∼2,000 bone beads were prepared semi-automatically using a liquid dispenser and spinner flask. The mechanical stimuli in the spinner flask further improved the osteogenic differentiation of the mesenchymal stem cells in the bone beads compared with that in static culture. Vascular endothelial cells readily attach to and cover the surface of bone beads. The in vitro assembly of the endothelial cell-enveloped bone beads resulted in microchannel formation in the interspaces between the bone beads. Significant effects of endothelialization on in vivo bone regeneration were shown in rats with cranial bone defects. The use of endothelialized bone beads may be a scalable and robust approach for treating large bone defects. STATEMENT OF SIGNIFICANCE: A unique aspect of this study is that the hMSC-encapsulated collagen microgels were prepared through spontaneous constriction, leading to the enrichment of collagen and cell density. This constriction resulted in favorable microenvironments for the osteogenic differentiation of hMSCs, which is superior to conventional spheroid culture. The microgel beads were then enveloped with vascular endothelial cells and assembled to fabricate a tissue graft with vasculature in the interspaces among the beads. The significant effects of endothelialization on in vivo bone regeneration were clearly demonstrated in rats with cranial bone defects. We believe that microgel beads covered with vascular endothelial cells provide a promising approach for engineering better tissue grafts for bone-regenerative medicine.

Vancomycin Containing PDLLA and PLGA/β-TCP Inhibit Biofilm Formation but Do Not Stimulate Osteogenic Transformation of Human Mesenchymal Stem Cells

Aims

Chronic osteomyelitis, including implant-related prosthetic joint infection, is extremely difficult to cure. We develop vancomycin containing release systems from poly(d,l-lactide) (PDLLA) and poly(d,l-lactide-co-glycolide) (PLGA) composites with beta-tricalcium phosphate (β-TCP) to treat methicillin-resistant Staphylococcus aureus osteomyelitis. We ask whether vancomycin containing PDLLA/β-TCP and PLGA/β-TCP composites will prevent early biofilm formation, allow cell proliferation and osteogenic differentiation, and stimulate osteogenic signaling molecules in the absence of an osteogenic medium.

Methods

Composites were produced and characterized with scanning electron microscopy. In vitro vancomycin release was assessed for 6 weeks. Biofilm prevention was calculated by crystal violet staining. Human bone marrow-derived mesenchymal stem cells (hBM-MSCs) and osteosarcoma cell (SaOS-2) proliferation and differentiation were assessed with water soluble tetrazolium salt and alkaline phosphatase (ALP) staining. Real-time quantitative polymerase chain reaction defined osteogenic signaling molecules for hBM-MSCs.

Results

Totally, 3.1 ± 0.2 mg and 3.4 ± 0.4 mg vancomycin released from PDLLA/β-TCP and the PLGA/β-TCP composites, respectively, and inhibited early biofilm formation. hBM-MSCs and SaOS-2 cells proliferated on the composites and stimulated ALP activity of cells. Runt-related transcription factor 2 (RUNX2) and SRY-Box transcription Factor 9 (SOX9) expressions were, however, lower with composites when compared with control.

Conclusion

Vancomycin containing PDLLA/β-TCP and PLGA/β-TCP composites inhibited early biofilm formation and proliferated and differentiated hBM-MSCs and SaOS-2 cells, but osteogenesis-related RUNX2 and SOX9 transcription factors were not strongly expressed in the absence of an osteogenic medium for 14 days.

3D bioprinting of osteon-mimetic scaffolds with hierarchical microchannels for vascularized bone tissue regeneration

The integration of three-dimensional (3D) bioprinted scaffold's structure and function for critical-size bone defect repair is of immense significance. Inspired by the basic component of innate cortical bone tissue--osteons, many studies focus on biomimetic strategy. However, the complexity of hierarchical microchannels in the osteon, the requirement of mechanical strength of bone, and the biological function of angiogenesis and osteogenesis remain challenges in the fabrication of osteon-mimetic scaffolds. Therefore, we successfully built mimetic scaffolds with vertically central medullary canals, peripheral Haversian canals, and transverse Volkmann canals structures simultaneously by 3D bioprinting technology using polycaprolactone and bioink loading with bone marrow mesenchymal stem cells (BMSCs) and bone morphogenetic protein-4 (BMP-4). Subsequently, endothelial progenitor cells (EPCs) were seeded into the canals to enhance angiogenesis. The porosity and compressive properties of bioprinted scaffolds could be well controlled by altering the structure and canal numbers of the scaffolds. The osteon-mimetic scaffolds showed satisfactory biocompatibility and promotion of angiogenesis and osteogenesis in vitro and prompted the new blood vessels and new bone formation in vivo. In summary, this study proposes a biomimetic strategy for fabricating structured and functionalized 3D bioprinted scaffolds for vascularized bone tissue regeneration.

Nanoparticles functionalized with stem cell secretome and CXCR4-overexpressing endothelial membrane for targeted osteoporosis therapy

Background

Osteoporosis is a chronic condition affecting patients’ morbidity and mortality and represents a big socioeconomic burden. Because stem cells can proliferate and differentiate into bone-forming cells, stem cell therapy for osteoporosis has been widely studied. However, cells as a live drug face multiple challenges because of their instability during preservation and transportation. In addition, cell therapy has potential adverse effects such as embolism, tumorigenicity, and immunogenicity.

Results

Herein, we sought to use cell-mimicking and targeted therapeutic nanoparticles to replace stem cells. We fabricated nanoparticles (NPs) using polylactic-co-glycolic acid (PLGA) loaded with the secretome (Sec) from mesenchymal stem cells (MSCs) to form MSC-Sec NPs. Furthermore, we cloaked the nanoparticles with the membranes from C–X–C chemokine receptor type 4 (CXCR4)-expressing human microvascular endothelial cells (HMECs) to generate MSC-Sec/CXCR4 NP. CXCR4 can target the nanoparticles to the bone microenvironment under osteoporosis based on the CXCR4/SDF-1 axis.

Conclusions

In a rat model of osteoporosis, MSC-Sec/CXCR4 NP were found to accumulate in bone, and such treatment inhibited osteoclast differentiation while promoting osteogenic proliferation. In addition, our results showed that MSC-Sec/CXCR4 NPs reduce OVX-induced bone mass attenuation in OVX rats.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-021-01231-6.

Lotus root and osteons-inspired channel structural scaffold mediate cell biomineralization and vascularized bone tissue regeneration

The interconnectivity of porous scaffold is vital for cell and tissue infiltration, and vascular networks formation, determining the successful bone regeneration in large bone defects. Here, inspired by the lotus-root and Haversian system of natural bone, a nano-hydroxyapatite/polyurethane (n-HA/PU) lotus root-like scaffold inlaid with micro holes on the wall of the adjacent channel was utilized to mediate cell biomineralization and vascularized bone tissue regeneration. Such a particular lotus-type structure remarkably promoted cells to proliferate and infiltrate into the center of the entire scaffold, serving as a clue to account for regulating cell alignment and differentiation physically. In vitro studies suggested that apatite accumulated dramatically on the channel wall in the lotus-type scaffold, probably promoting specific osteogenic differentiation of cells by the orientated channels, even in the absence of osteogenic factors. In vivo creation of critical bone defects (15-mm segments) was done in the radius of rabbits and implanted with the scaffold of different geometry to assess the structural parameters on the efficacy of new bone regeneration. The more extensive positive staining of BMP-2, more considerable amount of infiltrated capillary, more robust new bone formation, particularly the biomechanical strength of lotus-type scaffold group could reach the level of the control group without surgery, indicating that the lotus-type scaffold was more favorable for new bone tissue formation along tube-like channels. These results highlighted the potential of this biomimetic scaffold for cell and tissue infiltration and thus repair large bony defects.

Coculture of Endothelial and Stromal Cells to Promote Concurrent Osteogenesis and Vasculogenesis

A key challenge in the treatment of large bone defects is the need to provide an adequate and stable vascular supply as new tissue develops. Bone tissue engineering applies selected biomaterials and cell types to create an environment that promotes tissue formation, maturation, and remodeling. Mesenchymal stromal cells (MSCs) have been widely used in these strategies because of their established effects on bone formation, and their ability to act as stabilizing pericytes that support vascular regeneration by endothelial cells (ECs). However, the creation of vascularized bone tissue in vitro requires coupling of osteogenesis and vasculogenesis in a three-dimensional (3D) biomaterial environment. In the present study, 3D fibrin hydrogels containing MSCs and ECs were prevascularized in vitro for 7 days to create an endothelial network in the matrix, and were subsequently cultured for a further 14 days under either continued vasculogenic stimulus, a combination of vasculogenic and osteogenic (hybrid) stimulus, or only osteogenic stimulus. It was found that ECs produced robust vessel networks in 3D fibrin matrices over 7 days of culture, and these networks continued to expand over the 14-day treatment period under vasculogenic conditions. Culture in hybrid medium resulted in maintenance of vessel networks for 14 days, while osteogenic culture abrogated vessel formation. These trends were mirrored in data representing overall cell viability and cell number in the 3D fibrin constructs. MSCs were found to colocalize with EC networks under vasculogenic and hybrid conditions, suggesting pericyte-like function. The bone marker alkaline phosphatase increased over time in hybrid and osteogenic media, but mineral deposition was evident only under purely osteogenic conditions. These results suggest that hybrid media compositions can support some aspects of multiphase tissue formation, but that alternative strategies are needed to obtain robust, concomitant vascularization, and osteogenesis in engineered tissues in vitro. Impact statement The combined use of mesenchymal stromal cells (MSCs) and endothelial cells to concomitantly produce mature bone and a nourishing vasculature is a promising tissue engineering approach to treating large bone defects. However, it is challenging to create and maintain vascular networks in the presence of osteogenic cues. This study used a 3D fibrin matrix to demonstrate that prevascularization of the construct can lead to maintenance of vessel structures over time, but that osteogenesis is compromised under these conditions. This work illuminates the capacity of MSCs to serve as both supportive pericytes and as osteoprogenitor cells, and motivates new strategies for coupling osteogenesis and vasculogenesis in engineered bone tissues.

Multiple channels with interconnected pores in a bioceramic scaffold promote bone tissue formation

Insufficient nutrition exchange and limited transportation of blood supply in a porous only scaffold often hinder bone formation, even though the porous scaffold is loaded with cells or growth factors. To overcome these issues, we developed a cell- and growth factor-free approach to induce bone formation in a critical-size bone defect by using an interconnected porous beta-tricalcium phosphate (β-TCP) scaffold with multiple channels. In vitro cell experimental results showed that multiple channels significantly promoted cell attachment and proliferation of human bone marrow mesenchymal stem cells, stimulated their alkaline phosphatase activity, and up-regulated the osteogenic gene expression. Multiple channels also considerably stimulated the expression of various mechanosensing markers of the cells, such as focal adhesion kinase, filamentous actin, and Yes-associated protein-1 at both static and dynamic culturing conditions. The in vivo bone defect implantation results demonstrated more bone formation inside multiple-channeled scaffolds compared to non-channeled scaffolds. Multiple channels prominently accelerated collagen type I, bone sialoprotein and osteocalcin protein expression. Fluorochrome images and angiogenic marker CD31 staining exhibited more mineral deposition and longer vasculature structures in multiple-channeled scaffolds, compared to non-channeled scaffolds. All the findings suggested that the creation of interconnected multiple channels in the porous β-TCP scaffold is a very promising approach to promote bone tissue regeneration.

Donor variability alters differentiation and mechanical cohesion of tissue-engineered constructs with human endothelial/MSC co-culture

To move towards clinical applications, tissue engineering (TE) should be validated with human primary cells and offer easy connection to the native vascularisation. Based on a sheet-like bone substitute developed previously, we investigated a mesenchymal stem cells/endothelial cells (MSCs/ECs) coculture to enhance pre-vascularisation. Using MSCs from six independent donors whose differentiation potential was assessed towards two lineages, we focused on donor variability and cell crosstalk regarding bone differentiation. Coculture was performed on calcium phosphate granules in a specific chamber during 1 month. MSCs were seeded first then ECs were added after 2 weeks, with respective monocultures as control groups. Cell viability and organisation (fluorescence, electronic microscopy), differentiation (ALP staining/activity, RT-qPCR) and mechanical cohesion were analysed. Adaptation of the protocol to coculture was validated (high cell viability and proliferation). Activity and differentiation showed strong trends towards synergistic effects between cell types. MSCs reached early mineralisation stage of maturation. The delayed addition of ECs allowed for their attachment on developed MSCs' matrix. The main impact of donor variability could be here the lack of cell proliferation potential with some donors, leading to low differentiation and mechanical cohesion and therefore absence of sheet-like shape successfully obtained with others. We suggest therefore adapting protocols to cell proliferation potentials from one batch of cells to the other in a patient-specific approach.

Novel Molecule Nell-1 Promotes the Angiogenic Differentiation of Dental Pulp Stem Cells

Introduction

This work aimed to reveal the crucial role of Nell-1 in the angiogenic differentiation of human dental pulp stem cells (DPSCs) alone or co-cultured with human umbilical vein endothelial cell (HUVECs) in vitro and whether this molecule is involved in the pulp exposure model in vivo.

Methods

Immunofluorescence was conducted to ascertain the location of Nell-1 on DPSCs, HUVECs, and normal rat dental tissues. RT-PCR, Western blot, and ELISA were performed to observe the expression levels of angiogenic markers and determine the angiogenic differentiation of Nell-1 on DPSCs alone or co-cultured with HUVECs, as well as in vitro tube formation assay. Blood vessel number for all groups was observed and compared using immunohistochemistry by establishing a rat pulp exposure model.

Results

Nell-1 is highly expressed in the nucleus of DPSCs and HUVECs and is co-expressed with angiogenic markers in normal rat pulp tissues. Hence, Nell-1 can promote the angiogenic marker expression in DPSCs alone and co-cultured with other cells and can enhance angiogenesis in vitro as well as in the pulp exposure model.

Conclusion

Nell-1 may play a positive role in the angiogenic differentiation of DPSCs.

The effect of neural cell integrated into 3D co-axial bioprinted BMMSC structures during osteogenesis

A three-dimensional (3D) bioprinting is a new strategy for fabricating 3D cell-laden constructs that mimic the structural and functional characteristics of various tissues and provides a similar architecture and microenvironment of the native tissue. However, there are few reported studies on the neural function properties of bioengineered bone autografts. Thus, this study was aimed at investigating the effects of neural cell integration into 3D bioprinted bone constructs. The bioprinted hydrogel constructs could maintain long-term cell survival, support cell growth for human bone marrow-derived mesenchymal stem cells (BMMSCs), reduce cell surface biomarkers of stemness, and enhance orthopedic differentiation with higher expression of osteogenesis-related genes, including osteopontin (OPN) and bone morphogenetic protein-2. More importantly, the bioprinted constructs with neural cell integration indicated higher OPN gene and secretory alkaline phosphatase levels. These results suggested that the innervation in bioprinted bone constructs can accelerate the differentiation and maturation of bone development and provide patients with an option for accelerated bone function restoration.

Role of functionalized self-assembled peptide hydrogels in in vitro vasculogenesis

Fabrication of vascularized tissue constructs plays an integral role in creating clinically relevant tissues. Scaffold materials should be sufficiently vascularized to mimic functional and complex native tissues. Herein, we report the development of bioactive and biomimetic self-assembled peptide (SAP) hydrogels that allow the rapid formation of a vascular structure in vitro. The KLDLKLDLKLDL (KLD peptide) SAP was functionalized with laminin derived peptides IKVAV (V1) and YIGSR (V2) through direct coupling to mimic the natural extracellular matrix (ECM) and human umbilical endothelial cells (HUVECs) and mesenchymal stem cells (MSCs) cultured in 0.5% and 1% SAP hydrogels organized into vascularized structures. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) images proved the molecular integration of the nanofibrous structure in SAP hydrogels. The stability of SAP hydrogels was confirmed by rheological and degradation measurements. Bioactive peptide scaffolds enhanced significantly HUVEC/hMSC proliferation depicted by MTT analysis compared to KLD. Furthermore, the real time quantitative polymerase chain reaction (rt-PCR) was performed to analyse vascular gene expressions such as platelet/endothelial cell adhesion molecule-1 (PECAM-1), von Willebrand factor (vWF), and vascular endothelial cadherin (VE-cadherin). The results indicated that the KLD-V2 hydrogel significantly induced vasculogenesis in hMSC/HUVEC co-culture compared to KLD-V1, Biogelx and KLD because YIGSR in KLD-V2 promoted cell population and ECM secretion by the interaction with cells and increased vasculogenesis. Overall, the designed SAP hydrogel represents an effective scaffold for vascularization of tissue constructs with useful tissue engineering applications.

Coupling Osteogenesis and Vasculogenesis in Engineered Orthopedic Tissues

Inadequate vascularization of engineered tissue constructs is a main challenge in developing a clinically impactful therapy for large, complex, and recalcitrant bone defects. It is well established that bone and blood vessels form concomitantly during development, as well as during repair after injury. Endothelial cells (ECs) and mesenchymal stromal cells (MSCs) are known to be key players in orthopedic tissue regeneration and vascularization, and these cell types have been used widely in tissue engineering strategies to create vascularized bone. Coculture studies have demonstrated that there is crosstalk between ECs and MSCs that can lead to synergistic effects on tissue regeneration. At the same time, the complexity in fabricating, culturing, and characterizing engineered tissue constructs containing multiple cell types presents a challenge in creating multifunctional tissues. In particular, the timing, spatial distribution, and cell phenotypes that are most conducive to promoting concurrent bone and vessel formation are not well understood. This review describes the processes of bone and vascular development, and how these have been harnessed in tissue engineering strategies to create vascularized bone. There is an emphasis on interactions between ECs and MSCs, and the culture systems that can be used to understand and control these interactions within a single engineered construct. Developmental engineering strategies to mimic endochondral ossification are discussed as a means of generating vascularized orthopedic tissues. The field of tissue engineering has made impressive progress in creating tissue replacements. However, the development of larger, more complex, and multifunctional engineered orthopedic tissues will require a better understanding of how osteogenesis and vasculogenesis are coupled in tissue regeneration. Impact statement Vascularization of large engineered tissue volumes remains a challenge in developing new and more biologically functional bone grafts. A better understanding of how blood vessels develop during bone formation and regeneration is needed. This knowledge can then be applied to develop new strategies for promoting both osteogenesis and vasculogenesis during the creation of engineered orthopedic tissues. This article summarizes the processes of bone and blood vessel development, with a focus on how endothelial cells and mesenchymal stromal cells interact to form vascularized bone both during development and growth, as well as tissue healing. It is meant as a resource for tissue engineers who are interested in creating vascularized tissue, and in particular to those developing cell-based therapies for large, complex, and recalcitrant bone defects.

Strontium Laminarin polysaccharide modulates osteogenesis-angiogenesis for bone regeneration

Bone regeneration and repair has become one of the major clinical challenges worldwide and it involves multiple processes including inflammation, angiogenesis and osteogenesis. In this study, we synthesized strontium Laminarin polysaccharide (LP-Sr), a novel polysaccharide-metal complex that should have therapeutic effects on modulating osteogenesis and angiogenesis. The structure and composition of the as-fabricated LP-Sr were analyzed by EDS, XRD, FITR, ¹H NMR, HPLC, etc. The results indicate that we successfully synthesized this novel polysaccharide complex. Moreover, we evaluated the biomedical potential of this complex in promoting osteogenesis and angiogenesis by cell proliferation assay, ALP staining, immunofluorescent staining of CD31 and reverse transcription polymerase chain reaction (RT-PCR). The biological experiment results show that LP-Sr can effectively promote proliferation and increase the expression of VEGF and EGFL6 in HUVECs and significantly up-regulate the expression of Col1α1 and OCN in MC3T3-E1. Besides, it is suggested that LP-Sr has positive effects on the suppression of pro-inflammatory factor IL6 in both HUVECs and MC3T3-E1. Moreover, the osteogenic and angiogenic markers, i.e. alkaline phosphatase (ALP) and CD31, exhibited high expression in LP-Sr group. Hence, we believe that LP-Sr should be a promising and novel polysaccharide complex in modulating osteogenesis-angiogenesis for bone regeneration.

Liver bioengineering: Recent trends/advances in decellularization and cell sheet technologies towards translation into the clinic

Development of novel technologies provides the best tissue constructs engineering and maximizes their therapeutic effects in regenerative therapy, especially for liver dysfunctions. Among the currently investigated approaches of tissue engineering, scaffold-based and scaffold-free tissues are widely suggested for liver regeneration. Analogs of liver acellular extracellular matrix (ECM) are utilized in native scaffolds to increase the self-repair and healing ability of organs. Native ECM analog could improve liver repairing through providing the supportive framework for cells and signaling molecules, exerting normal biomechanical, biochemical, and physiological signal complexes. Recently, innovative cell sheet technology is introduced as an alternative for conventional tissue engineering with the advantage of fewer scaffold restrictions and cell culture on a Thermo-Responsive Polymer Surface. These sheets release the layered cells through a temperature-controlled procedure without enzymatic digestion, while preserving the cell-ECM contacts and adhesive molecules on cell-cell junctions. In addition, several novelties have been introduced into the cell sheet and decellularization technologies to aid cell growth, instruct differentiation/angiogenesis, and promote cell migration. In this review, recent trends, advancements, and issues linked to translation into clinical practice are dissected and compared regarding the decellularization and cell sheet technologies for liver tissue engineering.

Coupling between macrophage phenotype, angiogenesis and bone formation by calcium phosphates

The ability of calcium phosphate (CaP) materials to induce bone formation varies with their physicochemical properties, with surface topography as one of the most crucial triggers. In view of the natural wound healing processes (e.g., inflammation, angiogenesis, tissue formation and remodeling) initiated after surgical implantation, we here comparatively investigated the biological cascades occurring upon ectopic implantation of a tricalcium phosphate with submicron surface topography (TCP-S, osteoinductive) and a tricalcium phosphate with micron-scale topography (TCP-B, non-osteoinductive). In vitro, TCP-S facilitated M2 polarization of macrophages derived from a human leukemic cell line (THP-1) as shown by the enhanced secretion of TGF-β and CCL18. Interestingly, the conditioned media of polarized M2 macrophages on TCP-S enhanced tube formation by human umbilical vein endothelial cells (HUVECs), while had no influence on the osteogenic differentiation of human bone marrow stromal cells (HBMSCs). Following an intramuscular implantation in canines, TCP-S locally increased typical M2 macrophage markers (e.g., IL-10) at week 1 to 3 and enhanced blood vessel formation after week 3 as compared to TCP-B. Bone formation was observed histologically in TCP-S 6 weeks after implantation, and bone formation was inhibited when an angiogenesis inhibitor (KRN633) was loaded onto TCP-S. No bone formation was observed for TCP-B. The data presented herein suggest strong links between macrophage polarization, angiogenesis and CaP-induced bone formation. STATEMENT OF SIGNIFICANCE: The ability of calcium phosphate (CaP) materials to induce bone formation varies with their physicochemical properties, and the key physicochemical properties relevant to CaP-induced bone formation have been outlined in the last two decades. However, the biological mechanism underlying this material-driven osteoinduction remains largely unknown. This manuscript presented demonstrates strong links between surface topography, macrophage polarization, angiogenesis and bone formation in CaP materials implanted in non-osseous sites. The finding may provide new clues for further exploring the possible mechanism underlying osteoinduction by CaP materials.

Suturable elastomeric tubular grafts with patterned porosity for rapid vascularization of 3D constructs

Vascularization is considered to be one of the key challenges in engineering functional 3D tissues. Engineering suturable vascular grafts containing pores with diameter of several tens of microns in tissue engineered constructs may provide an instantaneous blood perfusion through the grafts improving cell infiltration and thus, allowing rapid vascularization and vascular branching. The aim of this work was to develop suturable tubular scaffolds to be integrated in biofabricated constructs, enabling the direct connection of the biofabricated construct with the host blood stream, providing an immediate blood flow inside the construct. Here, tubular grafts with customizable shapes (tubes, Y-shape capillaries) and controlled diameter ranging from several hundreds of microns to few mm are fabricated based on poly(glycerol sebacate) (PGS) / poly(vinyl alcohol) (PVA) electrospun scaffolds. Furthermore, a network of pore channels of diameter in the order of 100 µm was machined by laser femtosecond ablation in the tube wall. Both non-machined and laser machined tubular scaffolds elongated more than 100% of their original size have shown suture retention, being 5.85 and 3.96 N/mm2 respectively. To demonstrate the potential of application, the laser machined porous grafts were embedded in gelatin methacryloyl (GelMA) hydrogels, resulting in elastomeric porous tubular graft/GelMA 3D constructs. These constructs were then co-seeded with osteoblast-like cells (MG-63) at the external side of the graft and endothelial cells (HUVEC) inside, forming a bone osteon model. The laser machined pore network allowed an immediate endothelial cell flow towards the osteoblasts enabling the osteoblasts and endothelial cells to interact and form 3D structures. This rapid vascularization approach could be applied, not only for bone tissue regeneration, but also for a variety of tissues and organs.

Customizable 3D-Printed (Co-)Cultivation Systems for In Vitro Study of Angiogenesis

Due to the ever-increasing resolution of 3D printing technology, additive manufacturing is now even used to produce complex devices for laboratory applications. Personalized experimental devices or entire cultivation systems of almost unlimited complexity can potentially be manufactured within hours from start to finish-an enormous potential for experimental parallelization in a highly controllable environment. This study presents customized 3D-printed co-cultivation systems, which qualify for angiogenesis studies. In these systems, endothelial and mesenchymal stem cells (AD-MSC) were indirectly co-cultivated-that is, both cell types were physically separated through a rigid, 3D-printed barrier in the middle, while still sharing the same cell culture medium that allows for the exchange of signalling molecules. Biochemical-based cytotoxicity assays initially confirmed that the 3D printing material does not exert any negative effects on cells. Since the material also enables phase contrast and fluorescence microscopy, the behaviour of cells could be observed over the entire cultivation via both. Microscopic observations and subsequent quantitative analysis revealed that endothelial cells form tubular-like structures as angiogenic feature when indirectly co-cultured alongside AD-MSCs in the 3D-printed co-cultivation system. In addition, further 3D-printed devices are also introduced that address different issues and aspire to help in varying experimental setups. Our results mark an important step forward for the integration of customized 3D-printed systems as self-contained test systems or equipment in biomedical applications.

Immobilization of BMP-2 and VEGF within Multilayered Polydopamine-Coated Scaffolds and the Resulting Osteogenic and Angiogenic Synergy of Co-Cultured Human Mesenchymal Stem Cells and Human Endothelial Progenitor Cells

We have previously reported the fabrication of a polycaprolactone and hydroxyapatite composite scaffold incorporating growth factors to be used for bone regeneration. Two growth factors were incorporated employing a multilayered coating based on polydopamine (PDA). In particular, Bone morphogenetic protein-2 (BMP-2) was bound onto the inner PDA layer while vascular endothelial growth factor (VEGF) was immobilized onto the outer one. Herein, the in vitro release of both growth factors is evaluated. A fastest VEGF delivery followed by a slow and more sustained release of BMP-2 was demonstrated, thus fitting the needs for bone tissue engineering applications. Due to the relevance of the crosstalk between bone-promoting and vessel-forming cells during bone healing, the functionalized scaffolds are further assessed on a co-culture setup of human mesenchymal stem cells and human endothelial progenitor cells. Osteogenic and angiogenic gene expression analysis indicates a synergistic effect between the growth factor-loaded scaffolds and the co-culture conditions. Taken together, these results indicate that the developed scaffolds hold great potential as an efficient platform for bone-tissue applications.

Enhanced osteogenesis of human mesenchymal stem cells by self-assembled peptide hydrogel functionalized with glutamic acid templated peptides

Self-assembling peptide (SAP) hydrogel has been shown to be an excellent biological material for three-dimensional cell culture and stimulatie cell migration and differentiation into the scaffold, as well as for repairing bone tissue defects. Herein, we designed one of the SAP scaffolds KLD (KLDLKLDLKLDL) through direct coupling to short bioactive motif O1 (EEGGC) and O2 (EEEEE) of which bioactivity on osteogenic differentiation was previously demonstrated and self-assembled in different concentrations (0.5%, 1%, and 2%). Our aim was to enhance osteogenesis and biomineralization of injectable SAP hydrogels with controlled mechanical properties so that the peptide hydrogel also becomes capable of being injected to bone defects. The molecular integration of the nanofibrous peptide scaffolds was observed using atomic force microscopy (AFM) and scanning electron microscopy (SEM). The rheological properties and degradation profile of SAP hydrogels were evaluated to ensure stability of SAPs. Compared with pure KLD scaffold, we found that these designed bioactive peptide scaffolds significantly promoted hMSCs proliferation depicted by biochemical analysis of alkaline phosphatase (ALP) activity, total calcium deposition. Moreover, key osteogenic markers of ALP activity, collagen type I (COL-1), osteopontin (OP), and osteocalcin (OCN) expression levels determined by real-time polymerase chain reaction (PCR) and immunofluorescence analysis were also significantly increased with the addition of glutamic acid residues to KLD. We demonstrated that the designed SAP scaffolds promoted the proliferation and osteogenic differentiation of hMSCs. Our results suggest that these designed bioactive peptide scaffolds may be useful for promoting bone tissue regeneration.

Cystathionine γ-lyase-H2S facilitates mandibular defect healing via inducing osteogenic differentiation of bone marrow mesenchymal stem cells

OBJECTIVE

To investigate the effects of endogenous hydrogen sulfide (H₂S) synthase, cystathionine-γ-lyase (CSE), on the healing of mandibular defect and the osteogenic differentiation of human mandibular bone marrow mesenchymal stem cells (HM-BMMSCs).

METHODS

Sixty 8-week male C57BL/6 wild-type (WT) mice and CSE knockout (CSE^-/-) mice were divided into WT group, CSE^-/- group and CSE^-/- + GYY4137 (a slow-releasing H₂S donor) group. Mandibular defect healing in each group was identified by micro-CT. The histological staining and immunohistochemical staining were adopted to evaluate bone regeneration and reconstruction of mandibular defect. HM-BMMSCs were extracted and cultured for osteogenic induction, which were divided into control group, PAG (a CSE inhibitor) group, GYY4137 group and PAG + GYY4137 group. The mineralization of HM-BMMSCs in each group was determined by alkaline phosphatase (ALP) staining and alizarin red staining. Moreover, mRNA expressions of ALP and Runt-related transcription factor 2 (RUNX2) were detected by RT-PCR.

RESULTS

Mandibular defect healing in CSE^-/- mice was undesirable. When exogenous H₂S were supplemented to CSE^-/- mice, the new bone mass increased with higher degrees of bone mineralization and bone maturity. Bone mineral density (BMD), bone volume fraction (BV/TV) and bone trabecular thickness (Tb.Th) also significantly increased. in vitro experiments showed that PAG attenuated ALP activity and mineralized nodule formation ability in HM-BMMSCs, and repressed mRNA expressions of ALP and RUNX2. All these osteogenic indexes of HM-BMMSCs were reversed after exogenous H₂S was supplemented.

CONCLUSION

It is demonstrated that CSE deficiency thwarts the healing of mandibular defect. Blocking the synthesis of H₂S inhibits the osteogenic differentiation of HM-BMMSCs, thereby affects bone healing.

Biological Responses of Ceramic Bone Spacers Produced by Green Processing of Additively Manufactured Thin Meshes

Bone spacers are exclusively used for replacing the tissue after trauma and/or diseases. Ceramic materials bring positive opportunities to enhance greater osteointegration and performance of implants, yet processing of porous geometries can be challenging. Additive Manufacturing (AM) opens opportunities to grade porosity levels in a part; however, its productivity may be low due to its batch processing approach. The paper studies the biological responses yielded by hydroxyapatite with β-TCP (tricalcium phosphate) ceramic porous bone spacers manufactured by robocasting 2-layer meshes that are rolled in green and sintered. The implants are assessed in vitro and in vivo for their compatibility. Human bone marrow mesenchymal stem cells attached, proliferated and differentiated on the bone spacers produced. Cells on the spacers presented alkaline phosphatase staining, confirming osteogenic differentiation. They also expressed bone-specific COL1A1, BGAP, BSP, and SPP1 genes. The fold change of these genes ranged between 8 to 16 folds compared to controls. When implanted into the subcutaneous tissue of rabbits, they triggered collagen fibre formation and mild fibroblastic proliferation. In conclusion, rolled AM-meshes bone spacers stimulated bone formation in vitro and were biocompatible in vivo. This technology may give the advantage to custom produce spacers at high production rates if industrially upscaled.

Development of a decellularized porcine bone matrix for potential applications in bone tissue regeneration

Aim: The objectives of this study were to develop a new decellularized bone matrix (DBM) and to investigate its effect on the in vitro cell behavior of human bone marrow-derived mesenchymal stem cells (hMSCs), compared with porous β-tricalcium phosphate (β-TCP) scaffolds. Materials & methods: Triton X-100 and deoxycholate sodium solution, combining DNase I and RNase, were used to decellularize porcine bones. The DBM were then characterized by DNA contents and matrix components. hMSCs were then seeded on the DBM and β-TCP scaffolds to study cell behavior. Results: Results showed that most porcine cells were removed and the matrix components of the DBM were maintained. Cell culture results showed that DBM promoted cell attachment and proliferation of hMSCs but did not significantly promote the gene expression of osteogenic genes, compared with β-TCP scaffolds. Conclusion: DBM has similar function on cell behavior to β-TCP scaffolds that have promising potential in bone tissue regeneration.

Cell-cell interaction in a coculture system consisting of CRISPR/Cas9 mediated GFP knock-in HUVECs and MG-63 cells in alginate-GelMA based nanocomposites hydrogel as a 3D scaffold

The interaction between osteogenic and angiogenic cells through a coculturing system in biocompatible materials has been considered for successfully engineering vascularized bone tissue equivalents. In this study, we developed a hydrogel-blended scaffold consisted of gelatin methacryloyl (GelMA) and alginate enriched with hydroxyapatite nanoparticles (HAP) to model an in vitro prevascularized bone construct. The hydrogel-based scaffold revealed a higher mechanical stiffness than those of pure (GelMA), alginate, and (GelMA+ HAP) hydrogels. In the present study, we generated a green fluorescent protein (GFP) knock-in umbilical vein endothelial cells (HUVECs) cell line using the CRISPR/Cas9 technology. The GFP was inserted into the human-like ROSA locus of HUVECs genome. HUVECs expressing GFP were cocultured with OB-like cells (MG-63) within three-dimensionally (3D) fabricated hydrogel to investigate the response of cocultured osteoblasts and endothelial cells in a 3D structure. Cell viability under the 3D cocultured gel was higher than the 3D monocultured. Compared to the 3D monocultured condition, the cells were aligned and developed into the vessel-like structures. During 14 days of culture periods, the cells displayed actin protrusions by the formation of spike-like filopodia in the 3D cocultured model. Angiogenic and osteogenic-related genes such as CD31, vWF, and osteocalcin showed higher expression in the cocultured versus the monocultured. These results have collectively indicated that the 3D cocultured hydrogel facilitates interaction among cells, thereby having a greater effect on angiogenic and osteogenic properties in the absence of induction media.

Advanced gelatin-based vascularization bioinks for extrusion-based bioprinting of vascularized bone equivalents

Bone tissue is highly vascularized. The crosstalk of vascular and osteogenic cells is not only responsible for the formation of the strongly divergent tissue types but also for their physiological maintenance and repair. Extrusion-based bioprinting presents a promising fabrication method for bone replacement. It allows for the production of large-volume constructs, which can be tailored to individual tissue defect geometries. In this study, we used the all-gelatin-based toolbox of methacryl-modified gelatin (GM), non-modified gelatin (G) and acetylated GM (GMA) to tailor both the properties of the bioink towards improved printability, and the properties of the crosslinked hydrogel towards enhanced support of vascular network formation by simple blending. The vasculogenic behavior of human dermal microvascular endothelial cells (HDMECs) and human adipose-derived stem cells (ASCs) was evaluated in the different hydrogel formulations for 14 days. Co-culture constructs including a vascular component and an osteogenic component (i.e. a bone bioink based on GM, hydroxyapatite and ASCs) were fabricated via extrusion-based bioprinting. Bioprinted co-culture constructs exhibited functional tissue-specific cells whose interplay positively affected the formation and maintenance of vascular-like structures. The setup further enabled the deposition of bone matrix associated proteins like collagen type I, fibronectin and alkaline phosphatase within the 30-day culture.

3D printing of Haversian bone-mimicking scaffolds for multicellular delivery in bone regeneration

The integration of structure and function for tissue engineering scaffolds is of great importance in mimicking native bone tissue. However, the complexity of hierarchical structures, the requirement for mechanical properties, and the diversity of bone resident cells are the major challenges in constructing biomimetic bone tissue engineering scaffolds. Herein, a Haversian bone-mimicking scaffold with integrated hierarchical Haversian bone structure was successfully prepared via digital laser processing (DLP)-based 3D printing. The compressive strength and porosity of scaffolds could be well controlled by altering the parameters of the Haversian bone-mimicking structure. The Haversian bone-mimicking scaffolds showed great potential for multicellular delivery by inducing osteogenic, angiogenic, and neurogenic differentiation in vitro and accelerated the ingrowth of blood vessels and new bone formation in vivo. The work offers a new strategy for designing structured and functionalized biomaterials through mimicking native complex bone tissue for tissue regeneration.

Effects of Fiber Alignment and Coculture with Endothelial Cells on Osteogenic Differentiation of Mesenchymal Stromal Cells

Vascularization is a critical process during bone regeneration. The lack of vascular networks leads to insufficient oxygen and nutrients supply, which compromises the survival of regenerated bone. One strategy for improving the survival and osteogenesis of tissue-engineered bone grafts involves the coculture of endothelial cells (ECs) with mesenchymal stromal cells (MSCs). Moreover, bone regeneration is especially challenging due to its unique structural properties with aligned topographical cues, with which stem cells can interact. Inspired by the aligned fibrillar nanostructures in human cancellous bone, we fabricated polycaprolactone (PCL) electrospun fibers with aligned and random morphology, cocultured human MSCs with human umbilical vein ECs (HUVECs), and finally investigated how these two factors modulate osteogenic differentiation of human MSCs (hMSCs). After optimizing cell ratio, a hMSCs/HUVECs ratio (90:10) was considered to be the best combination for osteogenic differentiation. Coculture results showed that hMSCs and HUVECs adhered to and proliferated well on both scaffolds. The aligned structure of PCL fibers strongly influenced the morphology and orientation of hMSCs and HUVECs; however, fiber alignment was observed to not affect alkaline phosphate (ALP) activity or mineralization of hMSCs compared with random scaffolds. More importantly, cocultured cells on both random and aligned scaffolds had significantly higher ALP activities than monoculture groups, which indicated that coculture with HUVECs provided a larger relative contribution to the osteogenesis of hMSCs compared with fiber alignment. Taken together, we conclude that coculture of hMSCs with ECs is an effective strategy to promote osteogenesis on electrospun scaffolds, and aligned fibers could be introduced to regenerate bone tissues with oriented topography without significant deleterious effects on hMSCs differentiation. This study shows the ability to grow oriented tissue-engineered cocultures with significant increases in osteogenesis over monoculture conditions. Impact statement This work demonstrates an effective method of enhancing osteogenesis of mesenchymal stromal cells on electrospun scaffolds through coculturing with endothelial cells. Furthermore, we provide the optimized conditions for cocultures on electrospun fibrous scaffolds and engineered bone tissues with oriented topography on aligned fibers. This study demonstrates promising findings for growing oriented tissue-engineered cocultures with significant increase in osteogenesis over monoculture conditions.

Endothelialized microrods for minimally invasive in situ neovascularization

Despite the significant advancements in fabricating various scaffolding systems over the past decades, generation of functional tissues towards vascularization remains challenging for the currently available biofabrication approaches. On the other hand, the applicability of traditional surgical transplantation of vascularized tissue constructs is sometimes limited due to the sophisticated surgical procedures, which are invasive, leading to increased risks of scar formation and infection. Considering these facts, we present an innovative platform, the angiogenic microrods composed of sodium alginate/gelatin harboring proliferating endothelial cells using a specially designed double T-junction microfluidic device with an expansion chamber, for achieving minimally invasive neovascularization in situ. Such vessel-like microarchitectures could be derived through controlled penetration of the crosslinker genepin for the gelatin phase, ensuing differential degrees in crosslinking of peripheral and central portions of the microstructures, thus resulting in the formation of vascular lumen-like hollow cavities via endothelial cell migration and proliferation during culture in vitro. Furthermore, in vivo performance of the microrods was explored. We believe that the development of these modular microrods for minimally invasive delivery is of great interest and offers a convenient approach for vascularization in situ.

Anomalous in Vitro and in Vivo Degradation of Magnesium Phosphate Bioceramics: Role of Zinc Addition

In vitro and in vivo degradation behavior and biocompatibility of magnesium phosphate (MgP) bioceramics and the potential role of zinc (Zn) on degradation were compared. Samples were prepared by conventional solid-state sintering at 1200 °C for 2h. Zn-doped MgP (0.5 wt %) showed 50% less degradation than that of pure MgP after immersion into simulated body fluid (SBF) for 8 weeks. Osteoblast-like cell (MG-63) proliferation was evident in MgP ceramics, which was significantly enhanced upon Zn addition. Both Alamar Blue assay and Live/Dead imaging showed the highest cell attachment and proliferation for 0.5 wt % Zn-doped MgP. In vivo biocompatibility of these MgP ceramics were studied after implantation in the rabbit femur. The micro computed tomography (μ-CT) analysis showed that in vivo degradability increased with the increase in the Zn content which is in contradiction to in vitro degradability. Histological evaluation showed large influx of osteoclast cells to the implantation site for Zn-doped MgP samples compared to that of undoped MgP, which is the primary reason of increased degradability of these samples. After 90 days of implantation, large sections of 0.5 wt % Zn-doped MgP samples were replaced by newly formed bones. Fluorochrome labeling showed 78 ± 3% new bone formation for 0.5 wt % Zn-doped MgP ceramics compared to 56 ± 3% for pure MgP samples. Our findings suggest that the addition of Zn in MgP ceramics alters their sintering and degradation kinetics that leads to decreased in vitro degradation, however, when Zn-doped MgP ceramics were implanted in rabbits, higher degradability was observed due to lower Mg²⁺ ion concentration in the degradation media.

Three-dimensional Printed Mg-Doped β-TCP Bone Tissue Engineering Scaffolds: Effects of Magnesium Ion Concentration on Osteogenesis and Angiogenesis In Vitro

Background

Three-dimensional (3D) printed bone tissue engineering scaffolds have been widely used in research and clinical applications. β-TCP is a biomaterial commonly used in bone tissue engineering to treat bone defects, and its multifunctionality can be achieved by co-doping different metal ions. Magnesium doping in biomaterials has been shown to alter physicochemical properties of cells and enhance osteogenesis.

Methods

A series of Mg-doped TCP scaffolds were manufactured by using cryogenic 3D printing technology and sintering. The characteristics of the porous scaffolds, such as microstructure, chemical composition, mechanical properties, apparent porosity, etc., were examined. To further study the role of magnesium ions in simultaneously inducing osteogenesis and angiogenesis, human bone marrow mesenchymal stem cells (hBMSCs) and human umblical vein endothelial cells (HUVECs) were cultured in scaffold extracts to investigate cell proliferation, viability, and expression of osteogenic and angiogenic genes.

Results

The results showed that Mg-doped TCP scaffolds have the advantages of precise design, interconnected porous structure, and similar compressive strength to natural cancellous bone. hBMSCs and HUVECs exhibit high proliferation rate, cell morphology and viability in a certain amount of Mg2+. In addition, this concentration of magnesium can also increase the expression levels of osteogenic and angiogenic biomarkers.

Conclusion

A certain concentration of magnesium ions plays an important role in new bone regeneration and reconstruction. It can be used as a simple and effective method to enhance the osteogenesis and angiogenesis of bioceramic scaffolds, and support the development of biomaterials and bone tissue engineering scaffolds.

Enhanced osteogenesis of bone marrow stem cells cultured on hydroxyapatite/collagen I scaffold in the presence of low-frequency magnetic field

As a non-invasive biophysical therapy, electromagnetic fields (EMF) have been widely used to promote the healing of fractures. In the present study, hydroxyapatite/collagen I (HAC) loaded with rabbit bone marrow mesenchymal stem cells (MSCs) were cultured in a dynamic perfusion bioreactor and exposed to EMF of 15 Hz/1mT. Osteogenic differentiation of the seeded cells was analyzed through the evaluation of ALP activity and osteogenesis-related genes expression in vitro. The in vivo osteogenesis efficacy of the cell laden HAC constructs treated with/without EMF was evaluated through a rabbit femur condyle defect model. The results showed that EMF of 15 Hz/1mT could enhance the osteogenic differentiation of the cells seeded on HAC scaffold. Furthermore, the in vivo experiments demonstrated that EMF exposure could promote bone regeneration within the defect and bone integration between the graft and host bone. Taking together, the MSCs seeded HAC scaffold combined with EMF exposure could be a promising approach for bone tissue engineering.

The influence of osteopontin-guided collagen intrafibrillar mineralization on pericyte differentiation and vascularization of engineered bone scaffolds

Biomimetically mineralized collagen scaffolds are promising for bone regeneration, but vascularization of these materials remains to be addressed. Here, we engineered mineralized scaffolds using an osteopontin-guided polymer-induced liquid-precursor mineralization method to recapitulate bone's mineralized nanostructure. SEM images of mineralized samples confirmed the presence of collagen with intrafibrillar mineral, also EDS spectra and FTIR showed high peaks of calcium and phosphate, with a similar mineral/matrix ratio to native bone. Mineralization increased collagen compressive modulus up to 15-fold. To evaluate vasculature formation and pericyte-like differentiation, HUVECs and hMSCs were seeded in a 4:1 ratio in the scaffolds for 7 days. Moreover, we used RT-PCR to investigate the gene expression of pericyte markers ACTA2, desmin, CD13, NG2, and PDGFRβ. Confocal images showed that both nonmineralized and mineralized scaffolds enabled endothelial capillary network formation. However, vessels in the nonmineralized samples had longer vessel length, a larger number of junctions, and a higher presence of αSMA+ mural cells. RT-PCR analysis confirmed the downregulation of pericytic markers in mineralized samples. In conclusion, although both scaffolds enabled endothelial capillary network formation, mineralized scaffolds presented less pericyte-supported vessels. These observations suggest that specific scaffold characteristics may be required for efficient scaffold vascularization in future bone tissue engineering strategies. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1522-1532, 2019.

The synergistic effects of graphene-contained 3D-printed calcium silicate/poly-ε-caprolactone scaffolds promote FGFR-induced osteogenic/angiogenic differentiation of mesenchymal stem cells

Graphene-contained calcium silicate (CS)/polycaprolactone (PCL) scaffold (GCP) provides an alternative solution that can bring several bone formation properties, such as osteoinductive. This study finds out the optimal percentage of graphene additive to calcium silicate and polycaprolactone mixture for excellent in vitro and in vivo bone-regeneration ability, in addition, this scaffold could fabricate by 3D printing technology and demonstrates distinct mechanical, degradation, and biological behavior. With controlled structure and porosity by 3D printing, osteogenesis and proliferation capabilities of Wharton's Jelly derived mesenchymal stem cells (WJMSCs) were significantly enhanced when cultured on 3D printed GCP scaffolds. In this study, it was also discovered that fibroblast growth factor receptor (FGFR) plays an active role in modulating differentiation behavior of WJMSCs cultured on GCP scaffolds. The validation has been proved by analyzed the decreased cell proliferation, osteogenic-related protein (ALP and OC), and angiogenic-related protein (VEGF and vWF) with FGFR knockdown on all experimental groups. Moreover, this study infers that the GCP scaffold could induce the effects of proliferation, differentiation and related protein expression on WJMSCs through FGFR pathway. In summary, this research indicated the 3D-printed GCP scaffolds own the dual bioactivities to reach the osteogenesis and vascularization for bone regeneration.

The effect of modified electrospun PCL-nHA-nZnO scaffolds on osteogenesis and angiogenesis

Large bone defects treatment is one of the challenges in current bone tissue engineering approaches. Various strategies have been proposed to address this issue, among which, prevascularization by coculturing of angiogenic and osteogenic cells on the scaffolds can alleviate this problem. In the present study, modified fibrous scaffolds were prepared by electrospinning and subsequent ultrasonication of polycaprolactone (PCL) containing nano-hydroxyapatite (n-HA), with/without nano-zinc oxide (n-ZnO), and polyethylene oxide [PEO] as a sacrificial agent. The physical, mechanical, and chemical characteristics of the scaffolds were evaluated. The results showed the presence of n-ZnO, which in turn increased Young's module of the scaffolds from 5.5 ± 0.67 to 6.7 ± 1.77 MPa. Moreover, MTT, SEM, alkaline phosphatase (ALP) activity, chicken embryo chorioallantoic membrane (CAM) assay, and real-time RT-PCR were utilized to investigate the biocompatibility, cell adhesion and infiltration, osteoconductivity, angiogenic properties, and expression of osteogenic and angiogenic related genes. ALP assay showed that the highest enzyme activity was noted when the modified scaffolds containing n-ZnO were seeded with HUVEC:hBMSC at the cell ratio of 1:5. CAM assay showed induction of angiogenesis for the scaffolds containing n-ZnO. Real-time RT-PCR results showed significant upregulation of angiogenic related genes. Thus, the scaffolds containing n-ZnO may have great potential for osteogenesis and angiogenesis in tissue engineering applications.

Recent Advances in Scaffold Design and Material for Vascularized Tissue-Engineered Bone Regeneration

Bone tissue is a highly vascularized tissue and concomitant development of the vascular system and mineralized matrix requires a synergistic interaction between osteogenesis and angioblasts. Several strategies have been applied to achieve vascularized tissue-engineered bone, including the addition of cytokines as well as pre-vascularization strategies and co-culture systems. However, the scaffold is another extremely important component to consider, and development of vascularized bone scaffolds remains one of the greatest challenges for engineering clinically relevant bone substitutes. Here, this review highlights the biomaterial selection, preparation of pre-vascularized scaffolds, composition modification of the scaffold, structural design, and the comprehensive use of the above synergistic modifications of scaffold materials for vascular scaffolds in bone tissue engineering. Moreover, a strategy is proposed for the design of future scaffold structures, in which promoting the regeneration of vascularized bone by regulating the microenvironment should be the main focus. This overview can help illuminate progress in this field and identify the most recently developed scaffolds that show the greatest potential for achieving clinically vascularized bone.

Bone marrow mesenchymal stem cells: Aging and tissue engineering applications to enhance bone healing

Bone has well documented natural healing capacity that normally is sufficient to repair fractures and other common injuries. However, the properties of bone change throughout life, and aging is accompanied by increased incidence of bone diseases and compromised fracture healing capacity, which necessitate effective therapies capable of enhancing bone regeneration. The therapeutic potential of adult mesenchymal stem cells (MSCs) for bone repair has been long proposed and examined. Actions of MSCs may include direct differentiation to become bone cells, attraction and recruitment of other cells, or creation of a regenerative environment via production of trophic growth factors. With systemic aging, MSCs also undergo functional decline, which has been well investigated in a number of recent studies. In this review, we first describe the changes in MSCs during aging and discuss how these alterations can affect bone regeneration. We next review current research findings on bone tissue engineering, which is considered a promising and viable therapeutic solution for structural and functional restoration of bone. In particular, the importance of MSCs and bioscaffolds is highlighted. Finally, potential approaches for the prevention of MSC aging and the rejuvenation of aged MSC are discussed.

Engineering Porous β-Tricalcium Phosphate (β-TCP) Scaffolds with Multiple Channels to Promote Cell Migration, Proliferation, and Angiogenesis

Inadequate oxygen and nutrient diffusion in a porous scaffold often resulted in insufficient formation of branched vasculatures, which hindered bone regeneration. In this study, interconnected porous β-tricalcium phosphate (β-TCP) scaffolds with different geometric designs of channels were fabricated and compared to discover the functionality of structure on facilitating nutrient diffusion for angiogenesis. In vitro fluid transportation and degradation of the scaffolds were performed. Cell infiltration, migration, and proliferation of human umbilical vein endothelial cells (HUVECs) on the scaffolds were carried out under both static and dynamic culture conditions. A computational simulation model and a series of immunofluorescent staining were implemented to understand the mechanism of cell behavior in response to different types of scaffolds. Results showed that geometry with multiple channels significantly accelerated the release of Ca²⁺ and increased the fluid diffusion efficiency. Moreover, multiple channels promoted HUVECs' infiltration and migration in vitro. The ex vivo implantation results showed that the channels promoted cells from the rats' calvarial bone explants to infiltrate into the implanted scaffold. Multiple channels also stimulated HUVECs' proliferation prominently at both static and dynamic culturing conditions. The expression of both cell migration-related protein α5 and angiogenesis-related protein CD31 on multiple-channeled scaffolds was upregulated compared to that on the other two types of scaffolds, implying that multiple channels reinforced cell migration and angiogenesis. All the findings suggested that the geometric design of multiple channels in the porous β-TCP scaffold has promising potential to promote cell infiltration, migration, and further vascularization when implanted in vivo.