The influence of biomimetic topographical features and the extracellular matrix peptide RGD on human corneal epithelial contact guidance

Highly stable fibronectin-mimetic-peptide-based supramolecular hydrogel to accelerate corneal wound healing

Without timely treatment, poor wound healing in corneal injuries can seriously impair vision and lead to blindness. Thus, it is vital to develop a therapeutic strategy to accelerate corneal re-epithelialization. The conjugation of self-assembled motifs with a fibronectin-mimetic peptide sequence (PHSRN) drastically improves the chemical stability of PHSRN against protease hydrolysis and minimally affects its biological activity to promote the migration of corneal epithelial cells. The optimized Nap-FFPHSRN self-assembled into bioactive supramolecular hydrogels increases cell motility by remolding F-actin and boosts the tight junction of the corneal epithelium by increasing the expression of zonula occludens-1 (ZO-1). An in vivo experiment showed that a Nap-FFPHSRN hydrogel provided extended precorneal retention with good ocular tolerance after topical instillation. An animal model of corneal scrape showed that a single daily dose of Nap-FFPHSRN hydrogel had a superior therapeutic effect in facilitating corneal re-epithelialization with complete morphological and architectural recovery. With a rational approach to mimic bioactive proteins, this study presents a new strategy to demonstrate the potential of peptide-based supramolecular hydrogels for use in clinical treatment of corneal injury. STATEMENT OF SIGNIFICANCE: Here we systematically investigate the self-assembly behavior and chemical stability of designed peptide amphiphiles (Nap-FPHRSN, Nap-FFPHSRN and Nap-FFFPHSRN). The introduction of self-assembled motifs (Nap-F, Nap-FF and Nap-FFF) drastically enhances the chemical stability of fibronectin-mimetic peptide (PHSRN). Moreover, topical instillation of Nap-FFPHSRN hydrogel once daily, exhibits a better in vivo effect than PHSRN and the same in vivo effect as fibronectin, both of which are instilled three times daily, for promoting full morphological and architectural recovery after corneal re-epithelialization. As a rational design of conjugating bioactive peptides with self-assembled motifs to mimic bioactive proteins, this work may lead to a new approach that improves the in vivo therapeutic effect for treating corneal injury in clinic settings.

Design of Functional RGD Peptide-Based Biomaterials for Tissue Engineering

Tissue engineering (TE) is a rapidly expanding field aimed at restoring or replacing damaged tissues. In spite of significant advancements, the implementation of TE technologies requires the development of novel, highly biocompatible three-dimensional tissue structures. In this regard, the use of peptide self-assembly is an effective method for developing various tissue structures and surface functionalities. Specifically, the arginine-glycine-aspartic acid (RGD) family of peptides is known to be the most prominent ligand for extracellular integrin receptors. Due to their specific expression patterns in various human tissues and their tight association with various pathophysiological conditions, RGD peptides are suitable targets for tissue regeneration and treatment as well as organ replacement. Therefore, RGD-based ligands have been widely used in biomedical research. This review article summarizes the progress made in the application of RGD for tissue and organ development. Furthermore, we examine the effect of RGD peptide structure and sequence on the efficacy of TE in clinical and preclinical studies. Additionally, we outline the recent advancement in the use of RGD functionalized biomaterials for the regeneration of various tissues, including corneal repair, artificial neovascularization, and bone TE.

Elucidating the signal for contact guidance contained in aligned fibrils with a microstructural-mechanical model

Despite its importance in physiological processes and tissue engineering, the mechanism underlying cell contact guidance in an aligned fibrillar network has defied elucidation due to multiple interdependent signals that such a network presents to cells, namely, anisotropy of adhesion, porosity and mechanical behaviour. A microstructural-mechanical model of fibril networks was used to assess the relative magnitudes of these competing signals in networks of varied alignment strength based on idealized cylindrical pseudopods projected into the aligned and orthogonal directions and computing the anisotropy of metrics chosen for adhesion, porosity and mechanical behaviour: cylinder-fibre contact area for adhesion, persistence length of pores for porosity and total force to displace fibres from the cylindrical volume as well as network stiffness experienced upon cylinder retraction for mechanical behaviour. The signals related to mechanical anisotropy are substantially higher than adhesion and porosity anisotropy, especially at stronger network alignments, although their signal to noise (S/N) values are substantially lower. The former finding is consistent with a recent report that fibroblasts can sense fibril alignment via anisotropy of network mechanical resistance, and the model reveals this can be due to either mechanical resistance to pseudopod protrusion or retraction given their signal and S/N values are similar.

Multifunctional Biomaterials: Combining Material Modification Strategies for Engineering of Cell-Contacting Surfaces

In the human body, cells in a tissue are exposed to signals derived from their specific extracellular matrix (ECM), such as architectural structure, mechanical properties, and chemical composition (proteins, growth factors). Research on biomaterials in tissue engineering and regenerative medicine aims to recreate such stimuli using engineered materials to induce a specific response of cells at the interface. Although traditional biomaterials design has been mostly limited to varying individual signals, increasing interest has arisen on combining several features in recent years to improve the mimicry of extracellular matrix properties. Tremendous progress in combinatorial surface modification exploiting, for example, topographical features or variations in mechanics combined with biochemical cues has enabled the identification of their key regulatory characteristics on various cell fate decisions. Gradients especially facilitated such research by enabling the investigation of combined continuous changes of different signals. Despite unravelling important synergies for cellular responses, challenges arise in terms of fabrication and characterization of multifunctional engineered materials. This review summarizes recent work on combinatorial surface modifications that aim to control biological responses. Modification and characterization methods for enhanced control over multifunctional material properties are highlighted and discussed. Thereby, this review deepens the understanding and knowledge of biomimetic combinatorial material modification, their challenges but especially their potential.

Engineering topography: Effects on corneal cell behavior and integration into corneal tissue engineering

Cell-material interactions are important to tissue engineering. Inspired by the natural topographic structures on the extracellular matrix, a growing number of studies have integrated engineering topography into investigations of cell behavior on biomaterials. Engineering topography has a significant influence on cell behaviors. These cell-topography interactions play an important role in regenerative medicine and tissue engineering. Similarly, cell-topography interactions are important to corneal reconstruction and regeneration. In this review, we primarily summarized the effects of topographic cues on the behaviors of corneal cells, including cell morphology, adhesion, migration, and proliferation. Furthermore, the integration of engineering surface topography into corneal tissue engineering was also discussed.

Cells on hierarchically-structured platforms hosting functionalized nanoparticles

In this work, we report on a novel approach to develop hierarchically-structured cell culture platforms incorporating functionalized gold nanoparticles (AuNPs). In particular, the hierarchical substrates comprise primary pseudo-periodic arrays of silicon microcones combined with a secondary nanoscale pattern of homogeneously deposited AuNPs terminated with bio-functional moieties. AuNPs with various functionalities (i.e. oligopeptides, small molecules and oligomers) were successfully attached onto the microstructures. Experiments with PC12 cells on hierarchical substrates incorporating AuNPs carrying the RGD peptide showed an impressive growth and NGF-induced differentiation of the PC12 cells, compared to that on the NP-free, bare, micropatterned substrates. The exploitation of the developed methodology for the binding of AuNPs as carriers of specific bio-functional moieties onto micropatterned culture substrates for cell biology studies is envisaged.

Biomaterials for corneal bioengineering

Corneal transplantation is an important surgical treatment for many common corneal diseases. However, a worldwide shortage of tissue from suitable corneal donors has meant that many people are not able to receive sight-restoring operations. In addition, rejection is a major cause of corneal transplant failure. Bioengineering corneal tissue has recently gained widespread attention. In order to facilitate corneal regeneration, a range of materials is currently being investigated. The ideal substrate requires sufficient tectonic durability, biocompatibility with cultured cellular elements, transparency, and perhaps biodegradability and clinical compliance. This review considers the anatomy and function of the native cornea as a precursor to evaluating a variety of biomaterials for corneal regeneration including key characteristics for optimal material form and function. The integration of appropriate cells with the most appropriate biomaterials is also discussed. Taken together, the information provided offers insight into the requirements for fabricating synthetic and semisynthetic corneas for in vitro modeling of tissue development and disease, pharmaceutical screening, and in vivo application for regenerative medicine.

Engineering Approaches to Study Cellular Decision Making

In their native environment, cells are immersed in a complex milieu of biochemical and biophysical cues. These cues may include growth factors, the extracellular matrix, cell-cell contacts, stiffness, and topography, and they are responsible for regulating cellular behaviors such as adhesion, proliferation, migration, apoptosis, and differentiation. The decision-making process used to convert these extracellular inputs into actions is highly complex and sensitive to changes both in the type of individual cue (e.g., growth factor dose/level, timing) and in how these individual cues are combined (e.g., homotypic/heterotypic combinations). In this review, we highlight recent advances in the development of engineering-based approaches to study the cellular decision-making process. Specifically, we discuss the use of biomaterial platforms that enable controlled and tailored delivery of individual and combined cues, as well as the application of computational modeling to analyses of the complex cellular decision-making networks.

Hierarchical "As-Electrospun" Self-Assembled Fibrous Scaffolds Deconvolute Impacts of Chemically Defined Extracellular Matrix- and Cell Adhesion-Type Interactions on Stem Cell Haptokinesis

Controlled self-assembly of diblock copolymers offers the possibility of fabricating multilength scale, three-dimensional (3D) porous/fibrous structures (or scaffolds) with defined internal nano- or microstructure, with opportunities for application in a variety of fields, ranging from energy storage to bioengineering. Traditional methods by which such 3D constructs are produced are time-consuming and tedious, hindering their broader exploitation within larger-scale industrial processes. We report the development of a one-step process to fabricate "as-electrospun" self-assembled diblock copolymer micro- to nanometer-sized fibers incorporating core-shell or lamellar, closely packed spheres or bicontinuous gyroid nanosized structures. Isotropic and anisotropic (aligned) porous mats presenting spatially controlled chemistries, including bioactive (peptide-based) motifs, were successfully made from these hierarchical fibers. When functionalized with peptide sequences derived from a cell adhesion molecule (E-cadherin) and an extracellular matrix glycoprotein (laminin), these novel materials provided new insight into the impacts of such exquisitely tailored contact-guidance cues on the haptokinesis of human mesenchymal stem cells.

Initial contact guidance during cell spreading is contractility-independent

A wide variety of cell types exhibit substrate topography-based behavior, also known as contact guidance. However, the precise cellular mechanisms underlying this process are still unknown. In this study, we investigated contact guidance by studying the reaction of human endothelial cells (ECs) to well-defined microgroove topographies, both during and after initial cell spreading. As the cytoskeleton plays a major role in cellular adaptation to topographical features, two methods were used to perturb cytoskeletal structures. Inhibition of actomyosin contractility with the chemical inhibitor blebbistatatin demonstrated that initial contact guidance events are independent of traction force generation. However, cell alignment to the grooved substrate was altered at later time points, suggesting an initial 'passive' phase of contact guidance, followed by a contractility-dependent 'active' phase that relies on mechanosensitive feedback. The actin cytoskeleton was also perturbed in an indirect manner by culturing cells upside down, resulting in decreased levels of contact guidance and suggesting that a possible loss of contact between the actin cytoskeleton and the substrate could lead to cytoskeleton impairment. The process of contact guidance at the microscale was found to be primarily lamellipodia driven, as no bias in filopodia extension was observed on micron-scale grooves.

Topography-Guided Control of Local Migratory Behaviors and Protein Expression of Cancer Cells

In vivo cancer cell migration and invasion are directed by biophysical guidance mechanisms such as pre-existing microtracks and basement membrane extracellular matrices. Here, this paper reports the correlation of the local migratory behavior of cancer cells and the biochemical signal expression using the topography that can guide or inhibit cell behaviors. To this end, the local apparent migration and the protein expression level are investigated with respect to the topographical feature size (flat, nanoline, and microline) and orientation (microline, microconcentric, and microradial) with the collectively migrating (A431) and individually migrating (MDA-MB-231 and U-87-MG) cancer cells. The results show that the migration and the protein expression of focal adhesion kinase, rho-associated protein kinase, and extracellular signal-regulated kinase are localized in the periphery of cell colony. Furthermore, the inhibition of migratory behavior at the periphery recues the protein expression, while the guidance of migration enhances the aforementioned protein expression. The results may imply the employ of biophysical inhibitory factors can help to control invasiveness of cancer cells during the progression state.

Contact-mediated control of radial migration of corneal epithelial cells

PURPOSE

Patients with a heterozygous mutation in the gene encoding the transcription factor, PAX6, have a degenerative corneal opacity associated with failure of normal radial epithelial cell migration across the corneal surface and a reported wound healing defect. This study investigated the guidance mechanisms that drive the directed migration of corneal epithelial cells.

METHODS

In vivo corneal epithelial wounding was performed in adult wild-type and Pax6(+/-) mice, and the healing migration rates were compared. To investigate the control of the cell migration direction, primary corneal epithelial cells from wild-type and Pax6(+/-) mice were plated on grooved quartz substrates, and alignment relative to the grooves was assayed. A reconstructed corneal culture system was developed in which dissociated wild-type and genetically mutant corneal epithelial cells could be cultured on a de-epithelialized corneal stroma or basement membrane and their migration assayed with time-lapse microscopy.

RESULTS

The Pax6(+/-) cells efficiently re-epithelialized corneal wounds in vivo but had mild slowing of healing migration compared to the wild-type. Cells aligned parallel to quartz grooves in vitro, but the Pax6(+/-) cells were less robustly oriented than the wild-type. In the reconstructed corneal culture system, corneal epithelial cells continued to migrate radially, showing that the cells are guided by contact-mediated cues from the basement membrane. Recombining wild-type and Pax6 mutant corneal epithelial cells with wild-type and Pax6 mutant corneal stroma showed that normal Pax6 dosage was required autonomously in the epithelial cells for directed migration. Integrin-mediated attachment to the substrate, and intracellular PI3Kγ activity, were required for migration. Pharmacological inhibition of cAMP signaling randomized migration tracks in reconstructed corneas.

CONCLUSIONS

Striking patterns of centripetal migration of corneal epithelial cells observed in vivo are driven by contact-mediated cues operating through an intracellular cAMP pathway, and failure to read these cues underlies the migration defects that accompany corneal degeneration in patients with mutations in PAX6.

Substrate-mediated delivery of gene complex nanoparticles via polydopamine coating for enhancing competitiveness of endothelial cells

Substrate-mediated delivery of functional plasmid DNA (pDNA) has been proven to be a promising strategy to promote competitiveness of endothelial cells (ECs) over smooth muscle cells (SMCs), which is beneficial to inducing fast endothelialization of implanted vascular devices. Thus, it is of great importance to develop universal approaches with simplicity and easiness to immobilize DNA complex nanoparticles on substrates. In this study, the bioinspired polydopamine (PDA) coating was employed in immobilization of DNA complex nanoparticles, which were composed of protamine (PrS) and plasmid DNA encoding with hepatocyte growth factor (HGF-pDNA) gene. We demonstrated that the DNA complex nanoparticles can be successfully immobilized onto the PDA surface. Consequently, the HGF expression of both ECs and SMCs were significantly improved when they cultured on the DNA complex nanoparticles-immobilized substrates. Furthermore, EC proliferation was specifically promoted due to bioactivity of HGF, leading to an enhancement of EC competitiveness over SMCs. Our findings demonstrated the substrate-mediated functional gene nanoparticle delivery through PDA coating as a simple and efficient approach. It may hold great potential in the field of interventional cardiovascular implants.

Effective Spatial Separation of PC12 and NIH3T3 Cells by the Microgrooved Surface of Biocompatible Polymer Substrates

Most organs and tissues are composed of more than one type of cell that is spatially separated and located in different regions. This study used a microgrooved poly(lactic-co-glycolic acid) (PLGA) substrate to guide two types of cocultured cells to two spatially separated regions. Specifically, PC12 pheochromocytoma cells are guided to the inside of microgrooves, whereas NIH3T3 fibroblasts are guided to the ridge area in between neighboring parallel microgrooves. In addition, the microgrooved structures can significantly promote the proliferation and neural differentiation of PC12 cells as well as the osteogenic differentiation of NIH3T3 cells. Therefore, the microgrooved PLGA surface with separated PC12 and NIH3T3 cells can serve as a potential model system for studying nerve reconstruction in bone-repairing scaffolds.

Biomimetic stochastic topography and electric fields synergistically enhance directional migration of corneal epithelial cells in a MMP-3-dependent manner

Directed migration of corneal epithelial cells (CECs) is critical for maintenance of corneal homeostasis as well as wound healing. Soluble cytoactive factors and the intrinsic chemical attributes of the underlying extracellular matrix (ECM) participate in stimulating and directing migration. The central importance of the intrinsic biophysical attributes of the microenvironment of the cell in modulating an array of fundamental epithelial behaviors including migration has been widely documented. Among the best measures of these attributes are the intrinsic topography and stiffness of the ECM and electric fields (EFs). How cells integrate these multiple simultaneous inputs is not well understood. Here, we present a method that combines the use of (i) topographically patterned substrates (mean pore diameter 800nm) possessing features that approximate those found in the native corneal basement membrane; and (ii) EFs (0-150mVmm(-1)) mimicking those at corneal epithelial wounds that the cells experience in vivo. We found that topographic cues and EFs synergistically regulated directional migration of human CECs and that this was associated with upregulation of matrix metalloproteinase-3 (MMP3). MMP3 expression and activity were significantly elevated with 150mVmm(-1) applied-EF while MMP2/9 remained unaltered. MMP3 expression was elevated in cells cultured on patterned surfaces against planar surfaces. The highest single-cell migration rate was observed with 150mVmm(-1) applied EF on patterned and planar surfaces. When cultured as a confluent sheet, EFs induced collective cell migration on stochastically patterned surfaces compared with dissociated single-cell migration on planar surfaces. These results suggest significant interaction of biophysical cues in regulating cell behaviors and will help define design parameters for corneal prosthetics and help to better understand corneal wound healing.

Dynamic stiffness of polyelectrolyte multilayer films based on disulfide bonds for in situ control of cell adhesion

Dynamic stiffness of (poly-l-lysine/hyaluronan-SH) films was developed for in situ control of cell adhesion by using reversible disulfide linkages.

Involvement of YAP, TAZ and HSP90 in contact guidance and intercellular junction formation in corneal epithelial cells

The extracellular environment possesses a rich milieu of biophysical and biochemical signaling cues that are simultaneously integrated by cells and influence cellular phenotype. Yes-associated protein (YAP) and transcriptional co-activator with PDZ-binding motif (WWTR1; TAZ), two important signaling molecules of the Hippo pathway, have been recently implicated as nuclear relays of cytoskeletal changes mediated by substratum rigidity and topography. These proteins intersect with other important intracellular signaling pathways (e.g. Wnt and TGFβ). In the cornea, epithelial cells adhere to the stroma through a 3-dimensional topography-rich basement membrane, with features in the nano-submicron size-scale that are capable of profoundly modulating a wide range of fundamental cell behaviors. The influences of substratum-topography, YAP/TAZ knockdown, and HSP90 inhibition on cell morphology, YAP/TAZ localization, and the expression of TGFβ2 and CTGF, were investigated. The results demonstrate (a) that knockdown of TAZ enhances contact guidance in a YAP dependent manner, (b) that CTGF is predominantly regulated by YAP and not TAZ, and (c) that TGFβ2 is regulated by both YAP and TAZ in these cells. Additionally, inhibition of HSP90 resulted in nuclear localization and subsequent transcriptional-activation of YAP, formation of cell-cell junctions and co-localization of E-cadherin and β-catenin at adherens junctions. Results presented in this study reflect the complexities underlying the molecular relationships between the cytoskeleton, growth factors, heat shock proteins, and co-activators of transcription that impact mechanotransduction. The data reveal the importance of YAP/TAZ on the cell behaviors, and gene and protein expression.

PHBV/PAM scaffolds with local oriented structure through UV polymerization for tissue engineering

Locally oriented tissue engineering scaffolds can provoke cellular orientation and direct cell spread and migration, offering an exciting potential way for the regeneration of the complex tissue. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) scaffolds with locally oriented hydrophilic polyacrylamide (PAM) inside the macropores of the scaffolds were achieved through UV graft polymerization. The interpenetrating PAM chains enabled good interconnectivity of PHBV/PAM scaffolds that presented a lower porosity and minor diameter of pores than PHBV scaffolds. The pores with diameter below 100 μm increased to 82.15% of PHBV/PAM scaffolds compared with 31.5% of PHBV scaffolds. PHBV/PAM scaffold showed a much higher compressive elastic modulus than PHBV scaffold due to PAM stuffing. At 5 days of culturing, sheep chondrocytes spread along the similar direction in the macropores of PHBV/PAM scaffolds. The locally oriented PAM chains might guide the attachment and spreading of chondrocytes and direct the formation of microfilaments via contact guidance.

The functions and applications of RGD in tumor therapy and tissue engineering

Arginine-Glycine-Aspartic (RGD), is the specific recognition site of integrins with theirs ligands, and regulates cell-cell and cell-extracellular matrix interactions. The RGD motif can be combined with integrins overexpressed on the tumor neovasculature and tumor cells with a certain affinity, becoming the new target for imaging agents, and drugs, and gene delivery for tumor treatment. Further, RGD as a biomimetic peptide can also promote cell adherence to the matrix, prevent cell apoptosis and accelerate new tissue regeneration. Functionalizing material surfaces with RGD can improve cell/biomaterial interactions, which facilitates the generation of tissue-engineered constructs. This paper reviews the main functions and advantages of RGD, describes the applications of RGD in imaging agents, drugs, gene delivery for tumor therapy, and highlights the role of RGD in promoting the development of tissue engineering (bone regeneration, cornea repair, artificial neovascularization) in recent years.

Characterizing nanoscale topography of the aortic heart valve basement membrane for tissue engineering heart valve scaffold design

A fully effective prosthetic heart valve has not yet been developed. A successful tissue-engineered valve prosthetic must contain a scaffold that fully supports valve endothelial cell function. Recently, topographic features of scaffolds have been shown to influence the behavior of a variety of cell types and should be considered in rational scaffold design and fabrication. The basement membrane of the aortic valve endothelium provides important parameters for tissue engineering scaffold design. This study presents a quantitative characterization of the topographic features of the native aortic valve endothelial basement membrane; topographical features were measured, and quantitative data were generated using scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), and light microscopy. Optimal conditions for basement membrane isolation were established. Histological, immunohistochemical, and TEM analyses following decellularization confirmed basement membrane integrity. SEM and AFM photomicrographs of isolated basement membrane were captured and quantitatively analyzed. The basement membrane of the aortic valve has a rich, felt-like, 3-D nanoscale topography, consisting of pores, fibers, and elevations. All features measured were in the sub-100 nm range. No statistical difference was found between the fibrosal and ventricular surfaces of the cusp. These data provide a rational starting point for the design of extracellular scaffolds with nanoscale topographic features that mimic those found in the native aortic heart valve basement membrane.