Poly(ethylene glycol) diacrylate/hyaluronic acid semi-interpenetrating network compositions for 3-D cell spreading and migration

Application of biomaterials in the treatment of intracerebral hemorrhage

Although the current surgical hematoma removal treatment saves patients' lives in critical moments of intracerebral hemorrhage (ICH), the lethality and disability rates of ICH are still very high. Due to the individual differences of patients, postoperative functional improvement is still to be confirmed, and the existing drug treatment has limited benefits for ICH. Recent advances in biomaterials may provide new ideas for the therapy of ICH. This review first briefly describes the pathogenic mechanisms of ICH, including primary and secondary injuries such as inflammation and intracerebral edema, and briefly describes the existing therapeutic approaches and their limitations. Secondly, existing nanomaterials and hydrogels for ICH, including exosomes, liposomes, and polymer nanomaterials, are also described. In addition, the potential challenges and application prospects of these biomaterials for clinical translation in ICH treatment are discussed.

Exploring the Progress of Hyaluronic Acid Hydrogels: Synthesis, Characteristics, and Wide-Ranging Applications

This comprehensive review delves into the world of hyaluronic acid (HA) hydrogels, exploring their creation, characteristics, research methodologies, and uses. HA hydrogels stand out among natural polysaccharides due to their distinct features. Their exceptional biocompatibility makes them a top choice for diverse biomedical purposes, with a great ability to coexist harmoniously with living cells and tissues. Furthermore, their biodegradability permits their gradual breakdown by bodily enzymes, enabling the creation of temporary frameworks for tissue engineering endeavors. Additionally, since HA is a vital component of the extracellular matrix (ECM) in numerous tissues, HA hydrogels can replicate the ECM's structure and functions. This mimicry is pivotal in tissue engineering applications by providing an ideal setting for cellular growth and maturation. Various cross-linking techniques like chemical, physical, enzymatic, and hybrid methods impact the mechanical strength, swelling capacity, and degradation speed of the hydrogels. Assessment tools such as rheological analysis, electron microscopy, spectroscopy, swelling tests, and degradation studies are employed to examine their attributes. HA-based hydrogels feature prominently in tissue engineering, drug distribution, wound recovery, ophthalmology, and cartilage mending. Crafting HA hydrogels enables the production of biomaterials with sought-after qualities, offering avenues for advancements in the realm of biomedicine.

Hydrogel Based on Polyhydroxyalkanoate Sulfonate: Control of the Swelling Rate by the Ionic Group Content

Hydrogels based on poly(3-hydroxyalkanoate) (PHA) sulfonate and poly(ethylene glycol) diacrylate, PEGDA, are prepared. First, PHA sulfonate is synthesized from unsaturated PHA by a thiol-ene reaction in the presence of sodium-3-mercapto-1-ethanesulfonate. The hydrophilicity of PHAs is considerably increased by adding sulfonate functions, and three amphiphilic PHAs are synthesized, containing 10, 22, or 29% sulfonate functions. Then, hydrogels are formed in the presence of PEGDA having different molar masses, that is, 575 or 2000 g mol^-1. The hydrogels show fibrillar and porous structures observed in cryo-MEB with pore sizes that vary according to the content of sulfonated groups (10 to 29 mol %) ranging from 50 to more than 150 nm. Furthermore, depending on the proportions of the two polymers, a variable rigidity is observed from 2 to 40 Pa. In fact, the evaluation of the dynamic mechanical properties of the hydrogel determined by DMA reveals that the less rigid hydrogels hinder the adhesion of Pseudomonas aeruginosa PaO1 bacteria. Finally, these hydrogels swelling up to 5000% are noncytotoxic, allowing the adhesion and amplification of immortalized C2C12 cells, and they are therefore seen as promising materials both for repelling PaO1 bacteria and for amplifying myogenic cells.

Concentration Dependent Effect of Quaternary Amines on the Adhesion of U251-MG Cells

Cationic gels have seen increasing interest in recent years for 2D cell cultivation since they may represent an alternative to the well-known RGD-peptide motif functionalized gels. However, few hydrogel systems with adjustable cationic strength have been fabricated and investigated so far. In this work, eight gels with defined concentrations of cationic groups, two of which also contained the RGD peptide, were prepared from three well-defined, soluble precursor copolymers with thiol-functionalities and PEGDA3500 as a crosslinker via thiol-ene chemistry. Live/dead stainings of U-251-MG cells on the hydrogels with different concentrations of the cationic motif were made after 3 days and 7 days of cultivation. The results show a high dependence of the number of adhesive cells and their morphology, cluster versus spread cells, on the concentration of cationic groups in the gel. This effect was more pronounced when the gels were not further dialyzed before usage. In addition, a synergistic effect of the two motifs, cationic group and RGD peptide, could be demonstrated, which together induce stronger cell adhesion than either motif alone.

Multiple Cell Cultures for MRI Analysis

Magnetic resonance imaging (MRI) is an imaging method that enables diagnostics. In recent years, this technique has been widely used for research using cell cultures used in pharmaceutical science to understand the distribution of various drugs in a variety of biological samples, from cellular models to tissues. MRI's dynamic development in recent years, in addition to diagnostics, has allowed the method to be implemented to assess response to applied therapies. Conventional MRI imaging provides anatomical and pathological information. Due to advanced technology, MRI provides physiological information. The use of cell cultures is very important in the process of testing new synthesized drugs, cancer research, and stem cell research, among others. Two-dimensional (2D) cell cultures conducted under laboratory conditions, although they provide a lot of information, do not reflect the basic characteristics of the tumor. To replicate the tumor microenvironment in science, a three-dimensional (3D) culture of tumor cells was developed. This makes it possible to reproduce in vivo conditions where, in addition, there is a complex and dynamic process of cell-to-cell communication and cell-matrix interaction. In this work, we reviewed current research in 2D and 3D cultures and their use in MRI studies. Articles for each section were collected from PubMed, ScienceDirect, Web of Science, and Google Scholar.

High-cytocompatible semi-IPN bio-ink with wide molecular weight distribution for extrusion 3D bioprinting

The development of 3D printing has recently attracted significant attention on constructing complex three-dimensional physiological microenvironments. However, it is very challenging to provide a bio-ink with cell-harmless and high mold accuracy during extrusion in 3D printing. To overcome this issue, a technique improving the shear-thinning performance of semi-IPN bio-ink, which is universally applicable to all alginate/gelatin-based materials, was developed. Semi-IPN bio-ink prepared by cyclic heating–cooling treatment in this study can reduce the cell damage without sacrificing the accuracy of the scaffolds for its excellent shear-thinning performance. A more than 15% increase in post-printing Cell viability verified the feasibility of the strategy. Moreover, the bio-ink with low molecular weight and wide molecular weight distribution also promoted a uniform cell distribution and cell proliferation in clusters. Overall, this strategy revealed the effects of molecular parameters of semi-IPN bio-inks on printing performance, and the cell activity was studied and it could be widely applicable to construct the simulated extracellular matrix with various bio-inks.

Hyaluronic acid-fibrin hydrogels show improved mechanical stability in dermo-epidermal skin substitutes

Human plasma-derived bilayered skin substitutes have been successfully used by our group in different skin tissue engineering applications. However, several issues associated with their poor mechanical properties were observed, and they often resulted in rapid contraction and degradation. In this sense, hydrogels composed of plasma-derived fibrin and thiolated-hyaluronic acid (HA-SH, 0.05-0.2% w/v) crosslinked with poly(ethylene glycol) diacrylate (PEGDA, 2:1, 6:1, 10:1 and 14:1 mol of thiol to moles of acrylate) were developed to reduce the shrinking rates and enhance the mechanical properties of the plasma-derived matrices. Plasma/HA-SH-PEGDA hydrogels showed a decrease in the contraction behaviour ranging from 5% to 25% and an increase in Young's modulus. Furthermore, the results showed that a minimal amount of the added HA-SH was able to escape the plasma/HA-SH-PEGDA hydrogels after incubation in PBS. The results showed that the increase in rigidity of the matrices as well as the absence of adhesion cellular moieties in the second network of HA-SH/PEGDA, resulted in a decrease in contraction in the presence of the encapsulated primary human fibroblasts (hFBs), which may have been related to an overall decrease in proliferation of hFBs found for all hydrogels after 7 days with respect to the plasma control. The metabolic activity of hFB returned to the control levels at 14 days except for the 2:1 PEGDA crosslinking ratio. The metabolic activity of primary human keratinocytes (hKCs) seeded on the hydrogels showed a decrease when high amounts of HA-SH and PEGDA crosslinker were incorporated. Organotypic skins formed in vitro after 21 days with plasma/HA-SH-PEGDA hydrogels with an HA content of 0.05% w/v and a 2:1 crosslinking ratio were up to three times thicker than the plasma controls, evidencing a reduction in contraction, while they also showed better and more homogeneous keratin 10 (K10) expression in the supra-basal layer of the epidermis. Furthermore, filaggrin expression showed the formation of an enhanced stratum corneum for the constructs containing HA. These promising results indicate the potential of using these biomimetic hydrogels as in vitro skin models for pharmaceutical products and cosmetics and future work will elucidate their potential functionality for clinical treatment.

Elastin-Plasma Hybrid Hydrogels for Skin Tissue Engineering

Dermo-epidermal equivalents based on plasma-derived fibrin hydrogels have been extensively studied for skin engineering. However, they showed rapid degradation and contraction over time and low mechanical properties which limit their reproducibility and lifespan. In order to achieve better mechanical properties, elasticity and biological properties, we incorporated a elastin-like recombinamer (ELR) network, based on two types of ELR, one modified with azide (SKS-N₃) and other with cyclooctyne (SKS-Cyclo) chemical groups at molar ratio 1:1 at three different SKS (serine-lysine-serine sequence) concentrations (1, 3, and 5 wt.%), into plasma-derived fibrin hydrogels. Our results showed a decrease in gelation time and contraction, both in the absence and presence of the encapsulated human primary fibroblasts (hFBs), higher mechanical properties and increase in elasticity when SKSs content is equal or higher than 3%. However, hFBs proliferation showed an improvement when the lowest SKS content (1 wt.%) was used but started decreasing when increasing SKS concentration at day 14 with respect to the plasma control. Proliferation of human primary keratinocytes (hKCs) seeded on top of the hybrid-plasma hydrogels containing 1 and 3% of SKS showed no differences to plasma control and an increase in hKCs proliferation was observed for hybrid-plasma hydrogels containing 5 wt.% of SKS. These promising results showed the need to achieve a balance between the reduced contraction, the better mechanical properties and biological properties and indicate the potential of using this type of hydrogel as a testing platform for pharmaceutical products and cosmetics, and future work will elucidate their potential.

Enhancing Biopolymer Hydrogel Functionality through Interpenetrating Networks

Traditional hydrogels are strong candidates for biomedical applications; however, they may suffer from drawbacks such as weak mechanics, static properties, and an inability to fully replicate aspects of the cellular microenvironment. These challenges can be addressed through the incorporation of second networks to form interpenetrating polymer network (IPN) hydrogels. The objective of this review is to establish clear trends on the enhanced functionality achieved by incorporating secondary networks into traditional, biopolymer-based hydrogels. These include mechanical reinforcement, 'smart' systems that respond to external stimuli, and the ability to tune cell-material interactions. Through attention to network structure and chemistry, IPN hydrogels may advance to meet challenging criteria for a wide range of biomedical fields.

Synergistic control of mechanics and microarchitecture of 3D bioactive hydrogel platform to promote the regenerative potential of engineered hepatic tissue

Culturing autologous cells with therapeutic potential derived from a patient within a bioactive scaffold to induce functioning tissue formation is considered the ideal methodology towards realizing patient-specific regenerative medicine. Hydrogels are often employed as the scaffold material for this purpose mainly for their tunable mechanical and diffusional properties as well as presenting cell-responsive moieties. Herein, a two-fold strategy was employed to control the physicomechanical properties and microarchitecture of hydrogels to maximize the efficacy of engineered hepatic tissues. First, a hydrophilic polymeric crosslinker with a tunable degree of reactive functional groups was employed to control the mechanical properties in a wide range while minimizing the change in diffusional properties. Second, photolithography technique was utilized to introduce microchannels into hydrogels to overcome the critical diffusional limit of bulk hydrogels. Encapsulating hepatic progenitor cells derived via direct reprogramming of tissue-harvested fibroblasts, the application of this strategy to control the mechanics, diffusion, and architecture of hydrogels in a combinatorial manner could allow the optimization of their hepatic functions. The regenerative capacity of this engineered hepatic tissue was further demonstrated using an in vivo acute liver injury model.

Hydrogel-mediated local delivery of dexamethasone reduces neuroinflammation after traumatic brain injury

Excessive and prolonged neuroinflammation leads to neuronal cell death and limits functional recovery after traumatic brain injury (TBI). Dexamethasone (DX) is a steroidal anti-inflammatory agent that is known to attenuate early expression of pro-inflammatory cytokines associated with activated microglia/macrophages. In this study, we investigated the effect of dexamethasone-conjugated hyaluronic acid (HA-DXM) incorporated in a hydrolytically degradable, photo-cross-linkable PEG-bis-(acryloyloxy acetate) (PEG-bis-AA) hydrogel on the inflammatory response, apoptosis, and functional recovery in a controlled cortical impact (CCI) rat TBI model. In vitro, DX release from PEG-bis-AA/HA-DXM hydrogel was slow in PBS without enzymes, but significantly increased in the presence of hyauronidase/esterase enzymes. TBI was generated by a CCI device armed with a 3 mm tip (3.5 m/sec, depth: 2 mm) and treated immediately with PEG-bis-AA/HA-DXM hydrogel. PEG-bis-AA/HA hydrogel without DX was used for comparison and untreated TBI group was used as a control. Significant reductions in cavity size, inflammatory response, and apoptosis were observed in animals treated with PEG-bis-AA/HA-DXM compared to those receiving PEG-bis-AA/HA and untreated. Animals receiving the PEG-bis-AA/HA-DXM hydrogel also exhibited higher neuronal cell survival and improved motor functional recovery compared to the other two groups.

Vascular bioprinting with enzymatically degradable bioinks via multi-material projection-based stereolithography

Introduction of cavities and channels into 3D bioprinted constructs is a prerequisite for recreating physiological tissue architectures and integrating vasculature. Projection-based stereolithography inherently offers high printing speed with high spatial resolution, but so far has been incapable of fabricating complex native tissue architectures with cellular and biomaterial diversity. The use of sacrificial photoinks, i.e. photopolymerisable biomaterials that can be removed after printing, theoretically allows for the creation of any construct geometry via a multi-material printing process. However, the realisation of this strategy has been challenging because of difficult technical implementation and a lack of performant biomaterials. In this work, we use our projection-based, multi-material stereolithographic bioprinter and an enzymatically degradable sacrificial photoink to overcome the current hurdles. Multiple, hyaluronic acid-based photoinks were screened for printability, mechanical properties and digestibility through hyaluronidase. A formulation meeting all major requirements, i.e. desirable printing properties, generation of sufficiently strong hydrogels, as well as fast digestion rate, was identified. Biocompatibility of the material system was confirmed by embedding of human umbilical vein endothelial cells with followed enzymatic release. As a proof-of-concept, we bioprinted vascular models containing perfusable, endothelial cell-lined channels that remained stable for 28 days in culture. Our work establishes digestible sacrificial biomaterials as a new material strategy for 3D bioprinting of complex tissue models.

Semi-Interpenetrating Polymer Network of Hyaluronan and Chitosan Self-Healing Hydrogels for Central Nervous System Repair

The repair of the central nervous system (CNS) is a major challenge because of the difficulty for neurons or axons to regenerate after damages. Injectable hydrogels have been developed to deliver drugs or cells for neural repair, but these hydrogels usually require conditional stimuli or additional catalysts to control the gelling process. Self-healing hydrogels, which can be injected locally to fill tissue defects after stable gelation, are attractive candidates for CNS treatment. In the current study, the self-healing hydrogel with a semi-interpenetrating polymer network (SIPN) was prepared by incorporation of hyaluronan (HA) into the chitosan-based self-healing hydrogel. The addition of HA allowed the hydrogel to pass through a narrow needle much more easily. As the HA content increased, the hydrogel showed a more packed nanostructure and a more porous microstructure verified by coherent small-angle X-ray scattering and scanning electron microscopy. The unique structure of SIPN hydrogel enhanced the spreading, migration, proliferation, and differentiation of encapsulated neural stem cells in vitro. Compared to the pristine chitosan-based self-healing hydrogel, the SIPN hydrogel showed better biocompatibility, CNS injury repair, and functional recovery evaluated by the traumatic brain injury zebrafish model and intracerebral hemorrhage rat model. We proposed that the SIPN of HA and chitosan self-healing hydrogel allowed an adaptable environment for cell spreading and migration and had the potential as an injectable defect support for CNS repair.

Thin peptide hydrogel membranes suitable as scaffolds for engineering layered biostructures

A short tetramer peptide, Ac-IVKC, spontaneously formed a hydrogel in water. Disulfide bonds were introduced via hydrogen peroxide (H₂O₂)-assisted oxidation, resulting in (Ac-IVKC)₂ dimers. The extent of disulfide bond formation and gel stiffness increased with the amount of H₂O₂ used and 100% dimerization was achieved with 0.2% H₂O₂. The resultant gel achieved an elastic modulus of ∼0.9 MPa, which to our knowledge, has not been reported for peptide-based hydrogels. The enhanced mechanical property enabled the fabrication of thin and transparent membranes. The hydrogel could also be handled with forceps at mm thickness, greatly increasing its ease of physical manipulation. Excess H₂O₂ was removed and the membrane was then infused with cell culture media. Various cells, including primary human corneal stromal and epithelial cells, were seeded onto the hydrogel membrane and demonstrated to remain viable. Depending on the intended application, specific cell combination or membrane stacking order could be used to engineer layered biostructures. STATEMENT OF SIGNIFICANCE: A short tetramer peptide - Ac-IVKC - spontaneously formed a hydrogel in water and disulfide bonds were introduced via hydrogen peroxide (H₂O₂)-assisted oxidation. The extent of disulfide-bond formation and gel stiffness were modulated by the amount of H₂O₂. At maximum disulfide-bond formation, the hydrogel achieved an elastic modulus of ∼0.9 MPa, which to our knowledge, has not been reported for peptide-based hydrogels. The enhanced mechanical property enabled the fabrication of thin transparent membranes that can be physically manipulated at mm thickness. The gels also supported 3D cell growth, including primary human corneal stromal and epithelial cells. Depending on the intended application, specific combination of cells or individual membrane stacking order could be used to engineer layered biostructures.

Injectable and tunable hyaluronic acid hydrogels releasing chemotactic and angiogenic growth factors for endodontic regeneration

Bioengineered soft tissues on any meaningful scale or complexity must incorporate aspects of the functional tissue, namely a vasculature, providing cells oxygen and nutrients critical for their survival. However, the ability of tissue engineering strategies to promote a fast revascularization is critically limited. Particularly in endodontic regenerative therapies, the complicated anatomy of the root canal system, and the narrow apical access limit the supply of new blood vessels and pulp tissue ingrowth. Here we characterize the viscoelastic and microstructural properties of a class of injectable hyaluronic acid (HA) hydrogels formed in situ, reinforced with cellulose nanocrystals (CNCs) and enriched with platelet lysate (PL), and test its ability to promote cells recruitment and proangiogenic activity in vitro. The incorporation of CNCs enhanced the stability of the materials against hydrolytic and enzymatic degradation. Moreover, the release of the chemotactic and pro-angiogenic growth factors (GFs) (PDGF and VEGF) from the PL-laden hydrogels showed an improved sustained profile proportional to the amount of incorporated CNCs. The PL-laden hydrogels exhibited preferential supportive properties of encapsulated human dental pulp cells (hDPCs) in in vitro culture conditions. Finally, PL-laden hydrogels stimulated chemotactic and pro-angiogenic activity by promoting hDPCs recruitment and cell sprouting in hDPCs/human umbilical vein endothelial cell co-cultures in vitro, and in an ex vivo model. These results support the use of the combined system as a scaffold for GFs delivery and cells recruitment, thereby exhibiting great clinical potential in treating injuries in vascularized tissues.

STATEMENT OF SIGNIFICANCE

Innovative strategies for improved chemotactic and pro-angiogenic features of TE constructs are needed. In this study, we developed an injectable HA/CNC/PL hydrogel with improved structural and biologic properties, that not only provide a sustained release of chemotactic and proangiogenic GFs from PL but also enhance the cells' viability and angiogenic activity. As a result of their unique traits, the developed hydrogels are ideally suited to simultaneously act as a GFs controlled delivery system and as a supportive matrix for cell culture, recruitment, and revascularization induction, holding great potential for the regeneration of vascularized soft tissues, such as the dentin-pulp complex.

A hybrid injectable hydrogel from hyperbranched PEG macromer as a stem cell delivery and retention platform for diabetic wound healing

The injectable hydrogel with desirable biocompatibility and tunable properties can improve the efficacy of stem cell-based therapy. However, the development of injectable hydrogel remains a great challenge due to the restriction of crosslinking efficiency, mechanical properties, and potential toxicity. Here, we report that a new injectable hydrogel system was fabricated from hyperbranched multi-acrylated poly(ethylene glycol) macromers (HP-PEGs) and thiolated hyaluronic acid (HA-SH) and used as a stem cell delivery and retention platform. The new HP-PEGs were synthesized via in situ reversible addition fragmentation chain transfer (RAFT) polymerization using an FDA approved anti-alcoholic drug-Disulfiram (DS) as the RAFT agent precursor. HP-PEGs can form injectable hydrogels with HA-SH rapidly via thiol-ene click reaction under physiological conditions. The hydrogels exhibited stable mechanical properties, non-swelling and anti-fouling properties. Hydrogels encapsulating adipose-derived stem cells (ADSCs) have demonstrated promising regenerative capabilities such as the maintenance of ADSCs' stemness and secretion abilities. The ADSCs embedded hydrogels were tested on the treatment of diabetic wound in a diabetic murine animal model, showing enhanced wound healing.

STATEMENT OF SIGNIFICANCE

Diabetic wounds, which are a severe type of diabetes, have become one of the most serious clinical problems. There is a great promise in the delivery of adipose stem cells into wound sites using injectable hydrogels that can improve diabetic wound healing. Due to the biocompatibility of poly(ethylene glycol) diacrylate (PEGDA), we developed an in situ RAFT polymerization approach using anti-alcoholic drug-Disulfiram (DS) as a RAFT agent precursor to achieve hyperbranched PEGDA (HP-PEG). HP-PEG can form an injectable hydrogel by crosslinking with thiolated hyaluronic acid (HA-SH). ADSCs can maintain their regenerative ability and be delivered into the wound sites. Hence, diabetic wound healing process was remarkably promoted, including inhibition of inflammation, enhanced angiogenesis and re-epithelialization. Taken together, the ADSCs-seeded injectable hydrogel may be a promising candidate for diabetic wound treatment.

Hydrogels for Atopic Dermatitis and Wound Management: A Superior Drug Delivery Vehicle

Wound management, in addition to presenting a significant burden to patients and their families, also contributes significantly to a country’s healthcare costs. Treatment strategies are numerous, but in most cases not ideal. Hydrogels, three-dimensional polymeric materials that can withstand a great degree of swelling without losing structural integrity, are drawing great attention for their use as topical wound management solutions in the form of films and as vehicles for drug delivery, due to their unique properties of high water content, biocompatibility, and flexibility. Hydrogels, both naturally and synthetically derived, can be tuned to respond to specific stimuli such as pH, temperature and light and they are ideally suited as drug delivery vehicles. Here we provide a brief overview of the history and characteristics of hydrogels, assess their uses in wound management and drug delivery, and compare them with other types of common drug delivery vehicle.

Characterizations of hyaluronate-based terpolymeric hydrogel synthesized via free radical polymerization mechanism for biomedical applications

In the present study, a novel terpolymeric hydrogel was developed using sodium hyaluronate (HA), 2-hydroxyethyl acrylate (2-HEA), and poly(ethylene glycol) diacrylate (PEGDA) via free radical polymerization for biomedical applications. To achieve elasticity, swelling ability, porous architecture and sufficient gel strength, hyaluronate was chemically modified by grafting and crosslinking methods using 2-HEA and PEGDA, respectively. The structure and compositions of the fabricated terpolymer (HA-g-p(2-HEA)-x-PEGDA) were verified by FTIR, ¹H HR-MAS-NMR, and TGA analyses. The surface morphology and cross-section of the hydrogel was detected by SEM analysis. The gel nature of terpolymer in aqueous medium at 37 °C was confirmed from swelling study, and rheological experiment. Non-cytotoxicity and biocompatibility of the HA-g-p(2-HEA)-x-PEGDA hydrogel were ascertained by in vitro mouse osteoblastic cells (MC3T3) proliferation, and viability studies. Hematoxylin and eosin Y, and Masson's trichrome stainings were performed to show tissue regeneration ability on the prepared hydrogel. In vitro release results of proangiogenic drug-dimethyloxalylglycine (DMOG), and antibiotics-tetracycline (TCN) showed sustained release behaviour from the prepared hydrogel under different pHs at 37 °C. The mathematical models fitted data imply that both DMOG and TCN release follow first order kinetics, while, the release mechanism is primarily controlled by diffusion as well as erosion process. Finally, the novel biocompatible HA-g-p(2-HEA)-x-PEGDA gel, which showed sustained drugs release, and regeneration ability of extracellular matrix and collagen, could be employed in biomedical applications, especially, for the delivery of DMOG/TCN, and in tissue engineering.

All-polymer fiber-optic pH sensor

A novel all-polymer fiber-optic pH sensor using a UV-cured pH-sensitive hydrogel, poly(ethylene glycol) diacrylate (PEGDA), coated on a polymer fiber Bragg grating was developed. The PEGDA increased in volume according to the pH value of the surrounding fluid, which subsequently induced a lateral stress in the polymer fiber Bragg grating. The proposed pH sensor exhibits a pH sensitivity of up to -0.41 nm/pH and a fast response time of 30 s.

Rapid generation of three-dimensional microchannels for vascularization using a subtractive printing technique

The development of tissue-engineered products has been limited by lack of a perfused microvasculature that delivers nutrients and maintains cell viability. Current strategies to promote vascularization such as additive three-dimensional printing techniques have limitations. This study validates the use of an ultra-fast laser subtractive printing technique to generate capillary-sized channels in hydrogels prepopulated with cells by demonstrating cell viability relative to the photodisrupted channels in the gel. The system can move the focal spot laterally in the gel at a rate of 2500 mm/s by using a galvanometric scanner to raster the in plane focal spot. A Galilean telescope allows z-axis movement. Blended hydrogels of polyethylene glycol and collagen with a range of optical clarities, mechanical properties and swelling behavior were tested to demonstrate that the subtractive printing process for writing vascular channels is compatible with all of the blended hydrogels tested. Channel width and patterns were controlled by adjusting the laser energy and focal spot positioning, respectively. After treatment, high cell viability was observed at distances greater than or equal to 18 μm from the fabricated channels. Overall, this study demonstrates a flexible technique that has the potential to rapidly generate channels in tissue-engineered constructs.

Elasticity-based development of functionally enhanced multicellular 3D liver encapsulated in hybrid hydrogel

Current in vitro liver models provide three-dimensional (3-D) microenvironments in combination with tissue engineering technology and can perform more accurate in vivo mimicry than two-dimensional models. However, a human cell-based, functionally mature liver model is still desired, which would provide an alternative to animal experiments and resolve low-prediction issues on species differences. Here, we prepared hybrid hydrogels of varying elasticity and compared them with a normal liver, to develop a more mature liver model that preserves liver properties in vitro. We encapsulated HepaRG cells, either alone or with supporting cells, in a biodegradable hybrid hydrogel. The elastic modulus of the 3D liver dynamically changed during culture due to the combined effects of prolonged degradation of hydrogel and extracellular matrix formation provided by the supporting cells. As a result, when the elastic modulus of the 3D liver model converges close to that of the in vivo liver (≅ 2.3 to 5.9 kPa), both phenotypic and functional maturation of the 3D liver were realized, while hepatic gene expression, albumin secretion, cytochrome p450-3A4 activity, and drug metabolism were enhanced. Finally, the 3D liver model was expanded to applications with embryonic stem cell-derived hepatocytes and primary human hepatocytes, and it supported prolonged hepatocyte survival and functionality in long-term culture. Our model represents critical progress in developing a biomimetic liver system to simulate liver tissue remodeling, and provides a versatile platform in drug development and disease modeling, ranging from physiology to pathology.

STATEMENT OF SIGNIFICANCE

We provide a functionally improved 3D liver model that recapitulates in vivo liver stiffness. We have experimentally addressed the issues of orchestrated effects of mechanical compliance, controlled matrix formation by stromal cells in conjunction with hepatic differentiation, and functional maturation of hepatocytes in a dynamic 3D microenvironment. Our model represents critical progress in developing a biomimetic liver system to simulate liver tissue remodeling, and provides a versatile platform in drug development and disease modeling, ranging from physiology to pathology. Additionally, recent advances in the stem-cell technologies have made the development of 3D organoid possible, and thus, our study also provides further contribution to the development of physiologically relevant stem-cell-based 3D tissues that provide an elasticity-based predefined biomimetic 3D microenvironment.

Composite biopolymers for bone regeneration enhancement in bony defects

For the past century, various biomaterials have been used in the treatment of bone defects and fractures. Their role as potential substitutes for human bone grafts increases as donors become scarce. Metals, ceramics and polymers are all materials that confer different advantages to bone scaffold development. For instance, biocompatibility is a highly desirable property for which naturally-derived polymers are renowned. While generally applied separately, the use of biomaterials, in particular natural polymers, is likely to change, as biomaterial research moves towards mixing different types of materials in order to maximize their individual strengths. This review focuses on osteoconductive biocomposite scaffolds which are constructed around natural polymers and their performance at the in vitro/in vivo stages and in clinical trials.

Neovascularization Induced by the Hyaluronic Acid-Based Spongy-Like Hydrogels Degradation Products

Neovascularization has been a major challenge in many tissue regeneration strategies. Hyaluronic acid (HA) of 3-25 disaccharides is known to be angiogenic due to its interaction with endothelial cell receptors. This effect has been explored with HA-based structures but a transitory response is observed due to HA burst biodegradation. Herein we developed gellan gum (GG)-HA spongy-like hydrogels from semi-interpenetrating network hydrogels with different HA amounts. Enzymatic degradation was more evident in the GG-HA with high HA amount due to their lower mechanical stability, also resulting from the degradation itself, which facilitated the access of the enzyme to the HA in the bulk. GG-HA spongy-like hydrogels hyaluronidase-mediated degradation lead to the release of HA oligosaccharides of different amounts and sizes in a HA content-dependent manner which promoted in vitro proliferation of human umbilical cord vein endothelial cells (HUVECs) but not their migration. Although no effect was observed in human dermal microvascular endothelial cells (hDMECs) in vitro, the implantation of GG-HA spongy-like hydrogels in an ischemic hind limb mice model promoted neovascularization in a material-dependent manner, consistent with the in vitro degradation profile. Overall, GG-HA spongy-like hydrogels with a sustained release of HA oligomers are valuable options to improve tissue vascularization, a critical issue in several applications in the tissue engineering and regenerative medicine field.

Development of 3D Microvascular Networks Within Gelatin Hydrogels Using Thermoresponsive Sacrificial Microfibers

A 3D microvascularized gelatin hydrogel is produced using thermoresponsive sacrificial poly(N-isopropylacrylamide) microfibers. The capillary-like microvascular network allows constant perfusion of media throughout the thick hydrogel, and significantly improves the viability of human neonatal dermal fibroblasts encapsulated within the gel at a high density.

Fabrication and Characterization of a Novel Anticancer Drug Delivery System: Salecan/Poly(methacrylic acid) Semi-interpenetrating Polymer Network Hydrogel

Salecan is a novel linear extracellular polysaccharide with a linear backbone of 1-3-linked glucopyranosyl units. Salecan is suitable for preparing hydrogels for biomedical applications due to its prominent physicochemical and biological profiles. In this contribution, a variety of innovative semi-interpenetrating polymer network (semi-IPN) hydrogels consisting of Salecan and poly(methacrylic acid) (PMAA) were developed via free radical polymerization for controlled drug delivery. The successful fabrication of the semi-IPNs was verified by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetric (TGA) measurements. Scanning electron microscopy (SEM) and rheology analyses demonstrated that the morphological and mechanical behaviors of the resultant hydrogels were strongly affected by the contents of Salecan and cross-linker N,N'-methylenebis(acrylamide) (BIS). Moreover, the swelling properties of these hydrogels were systematically investigated, and the results indicated that they exhibited pH sensitivity. The drug delivery applications of such fabricated hydrogels were further evaluated from which doxorubicin (Dox) was chosen as a model drug for in vitro release and cell viability studies. It was found that the Dox release from the Dox-loaded hydrogels was significantly accelerated when the pH of the release media decreased from 7.4 to 5.0. Toxicity assays confirmed that the blank hydrogels had negligible toxicity to normal cells, whereas the Dox-loaded hydrogels remained high in cytotoxicity for A549 and HepG2 cancer cells. All of these attributes implied that the new proposed semi-IPNs serve as potential drug delivery platforms for cancer therapy.

Cell-Mediated Dexamethasone Release from Semi-IPNs Stimulates Osteogenic Differentiation of Encapsulated Mesenchymal Stem Cells

Scaffold-based delivery of bioactive molecules capable of directing stem cell differentiation is critical to the development of point-of-care cell therapy for orthopedic repair. Dexamethasone-conjugated hyaluronic acid (HA-DXM) was synthesized and combined with hydrolytically degradable, photo-cross-linkable PEG-bis(2-acryloyloxy propanoate) (PEG-bis-AP) to form semi-IPNs. Dexamethasone (DX) release was limited in physiological buffer and substantially increased in the presence of encapsulated human mesenchymal stem cells (hMSCs) or exogenous hyaluronidase, confirming that release occurred primarily by a cell-mediated enzymatic mechanism. hMSCs encapsulated in PEG-bis-AP/HA-DXM semi-IPNs increased osteoblast-specific gene expression, alkaline phosphatase activity, and matrix mineralization, attaining levels that were not significantly different from positive controls consisting of hMSCs in PEG-bis-AP/native HA cultured with DX supplementation in the culture medium. These studies demonstrate that PEG-bis-AP/HA-DXM semi-IPNs can provide cell-mediated release of bioactive free DX that induces hMSC osteogenic differentiation. This approach offers an efficient system for local delivery of osteogenic molecules empowering point of care applications.

Building cell-containing multilayered phospholipid polymer hydrogels for controlling the diffusion of a bioactive reagent

We developed multilayered phospholipid polymer hydrogels containing living cells and a specific bioactive reagent for the regulation of cell-fate.