Successful chondrogenesis within scaffolds, using magnetic stem cell confinement and bioreactor maturation

Magnetic Seeding of SPIO-BMSCs Into a Biphasic Scaffold Can Promote Tendon-Bone Healing After Rotator Cuff Repair

BACKGROUND

The tendon-bone interface (TBI) in the rotator cuff has a poor intrinsic capacity for healing, which increases the risk of retear after rotator cuff repair (RCR). However, facilitating regeneration of the TBI still remains a great clinical challenge. Herein, the authors established a novel strategy based on magnetic seeding to enhance the TBI regeneration.

HYPOTHESIS

Magnetic seeding bone marrow mesenchymal stem cells labeled with superparamagnetic iron oxide (SPIO-BMSCs) into a biphasic scaffold can promote tendon-bone healing after RCR.

STUDY DESIGN

Controlled laboratory study.

METHODS

BMSCs were labeled with SPIOs. Prussian blue staining, CCK-8 tests, Western blot, and quantitative reverse transcription polymerase chain reaction (PCR) were used to determine the optimal effect concentration of SPIOs on cell bioactivities and abilities. Then SPIO-BMSCs were magnetically seeded into a biphasic scaffold under a magnetic field. The seeding efficacy was assessed by a scanning electron microscope, and the potential mechanism in chondrogenic differentiation after seeding SPIO-BMSCs into the scaffold was evaluated by Western blot and PCR. Furthermore, the effect of SPIO-BMSC/biphasic scaffold on tendon-bone healing after RCR using a rat model was examined using histological analysis, enzyme-linked immunosorbent assay, and biomechanical evaluation.

RESULTS

BMSCs labeled with 100 μg/mL SPIO had no effect on cell bioactivities and the ability of chondrogenic differentiation. SPIO-BMSCs were magnetically seeded into a biphasic scaffold, which offered a high seeding efficacy to enhance chondrogenic differentiation of SPIO-BMSCs via the CDR1as/miR-7/FGF2 pathway for TBI formation in vitro. Furthermore, in vivo application of the biphasic scaffold with magnetically seeded SPIO-BMSCs showed their regenerative potential, indicating that they could significantly accelerate and promote TBI healing with superior biomechanical properties after RCR in a rat rotator cuff tear model.

CONCLUSION

Magnetically seeding SPIO-BMSCs into a biphasic scaffold enhanced seeding efficacy to promote cell distribution and condensation. This construct enhanced the chondrogenesis process via the CDR1as/miR-7/FGF2 pathway and further promoted tendon-bone healing after RCR in a rat rotator cuff tear model.

CLINICAL RELEVANCE

This study provides an alternative strategy for improving TBI healing after RCR.

Improved Neural Inductivity of Size-Controlled 3D Human Embryonic Stem Cells Using Magnetic Nanoparticles

Background: To improve the efficiency of neural development from human embryonic stem cells, human embryoid body (hEB) generation is vital through 3-dimensional formation. However, conventional approaches still have limitations: long-term cultivation and laborious steps for lineage determination. Methods: In this study, we controlled the size of hEBs for ectodermal lineage specification using cell-penetrating magnetic nanoparticles (MNPs), which resulted in reduced time required for initial neural induction. The magnetized cells were applied to concentrated magnetic force for magnet-derived multicellular organization. The uniformly sized hEBs were differentiated in neural induction medium (NIM) and suspended condition. This neurally induced MNP-hEBs were compared with other groups. Results: As a result, the uniformly sized MNP-hEBs in NIM showed significantly improved neural inductivity through morphological analysis and expression of neural markers. Signaling pathways of the accelerated neural induction were detected via expression of representative proteins; Wnt signaling, dopaminergic neuronal pathway, intercellular communications, and mechanotransduction. Consequently, we could shorten the time necessary for early neurogenesis, thereby enhancing the neural induction efficiency. Conclusion: Overall, this study suggests not only the importance of size regulation of hEBs at initial differentiation stage but also the efficacy of MNP-based neural induction method and stimulations for enhanced neural tissue regeneration.

Review: Tissue Engineering of Small-Diameter Vascular Grafts and Their In Vivo Evaluation in Large Animals and Humans

To date, a wide range of materials, from synthetic to natural or a mixture of these, has been explored, modified, and examined as small-diameter tissue-engineered vascular grafts (SD-TEVGs) for tissue regeneration either in vitro or in vivo. However, very limited success has been achieved due to mechanical failure, thrombogenicity or intimal hyperplasia, and improvements of the SD-TEVG design are thus required. Here, in vivo studies investigating novel and relative long (10 times of the inner diameter) SD-TEVGs in large animal models and humans are identified and discussed, with emphasis on graft outcome based on model- and graft-related conditions. Only a few types of synthetic polymer-based SD-TEVGs have been evaluated in large-animal models and reflect limited success. However, some polymers, such as polycaprolactone (PCL), show favorable biocompatibility and potential to be further modified and improved in the form of hybrid grafts. Natural polymer- and cell-secreted extracellular matrix (ECM)-based SD-TEVGs tested in large animals still fail due to a weak strength or thrombogenicity. Similarly, native ECM-based SD-TEVGs and in-vitro-developed hybrid SD-TEVGs that contain xenogeneic molecules or matrix seem related to a harmful graft outcome. In contrast, allogeneic native ECM-based SD-TEVGs, in-vitro-developed hybrid SD-TEVGs with allogeneic banked human cells or isolated autologous stem cells, and in-body tissue architecture (IBTA)-based SD-TEVGs seem to be promising for the future, since they are suitable in dimension, mechanical strength, biocompatibility, and availability.

Recent Advances in Three-Dimensional Multicellular Spheroid Culture and Future Development

Three-dimensional multicellular spheroids (MCSs) have received extensive attention in the field of biomedicine due to their ability to simulate the structure and function of tissues in vivo more accurately than traditional in vitro two-dimensional models and to simulate cell-cell and cell extracellular matrix (ECM) interactions. It has become an important in vitro three-dimensional model for tumor research, high-throughput drug screening, tissue engineering, and basic biology research. In the review, we first summarize methods for MCSs generation and their respective advantages and disadvantages and highlight the advances of hydrogel and microfluidic systems in the generation of spheroids. Then, we look at the application of MCSs in cancer research and other aspects. Finally, we discuss the development direction and prospects of MCSs.

Hurdles to uptake of mesenchymal stem cells and their progenitors in therapeutic products

Twenty-five years have passed since the first clinical trial utilising mesenchymal stomal/stem cells (MSCs) in 1995. In this time academic research has grown our understanding of MSC biochemistry and our ability to manipulate these cells in vitro using chemical, biomaterial, and mechanical methods. Research has been emboldened by the promise that MSCs can treat illness and repair damaged tissues through their capacity for immunomodulation and differentiation. Since 1995, 31 therapeutic products containing MSCs and/or progenitors have reached the market with the level of in vitro manipulation varying significantly. In this review, we summarise existing therapeutic products containing MSCs or mesenchymal progenitor cells and examine the challenges faced when developing new therapeutic products. Successful progression to clinical trial, and ultimately market, requires a thorough understanding of these hurdles at the earliest stages of in vitro pre-clinical development. It is beneficial to understand the health economic benefit for a new product and the reimbursement potential within various healthcare systems. Pre-clinical studies should be selected to demonstrate efficacy and safety for the specific clinical indication in humans, to avoid duplication of effort and minimise animal usage. Early consideration should also be given to manufacturing: how cell manipulation methods will integrate into highly controlled workflows and how they will be scaled up to produce clinically relevant quantities of cells. Finally, we summarise the main regulatory pathways for these clinical products, which can help shape early therapeutic design and testing.

3D Bioprinting: The Roller Coaster Ride to Commercialization

Three-dimensional (3D) bioprinting as a technology is being researched and applied since 2003. It is actually several technologies (inkjet, extrusion, laser, magnetic bioprinting, etc.) under an umbrella term "3D bioprinting." The versatility of this technology allows widespread applications in several; however, after almost 20 years of research, there is still a limited number of cases of commercialized applications. This article discusses the potential for 3D bioprinting in regenerative medicine, drug discovery, and food industry, as well as the existing cases of companies that create commercialized products and services in the aforementioned areas and even in fashion, including their go-to-market route and financing received. We also address the main barriers to creating practical applications of 3D bioprinting within each sphere the technology that is being studied for.

Magnetically Actuated Manipulation and Its Applications for Cartilage Defects: Characteristics and Advanced Therapeutic Strategies

For the fact that articular cartilage is a highly organized and avascular tissue, cartilage defects are limited to spontaneously heal, which would subsequently progress to osteoarthritis. Many methods have been developed to enhance the ability for cartilage regeneration, among which magnetically actuated manipulation has attracted interests due to its biocompatibility and non-invasive manipulation. Magnetically actuated manipulation that can be achieved by introducing magnetic nanoparticles and magnetic field. This review summarizes the cutting-edge research on the chondrogenic enhancements via magnetically actuated manipulation, including cell labeling, cell targeting, cell assembly, magnetic seeding and tissue engineering strategies.

Mechanosensing of Mechanical Confinement by Mesenchymal-Like Cells

Mesenchymal stem cells (MSCs) and tumor cells have the unique capability to migrate out of their native environment and either home or metastasize, respectively, through extremely heterogeneous environments to a distant location. Once there, they can either aid in tissue regrowth or impart an immunomodulatory effect in the case of MSCs, or form secondary tumors in the case of tumor cells. During these journeys, cells experience physically confining forces that impinge on the cell body and the nucleus, ultimately causing a multitude of cellular changes. Most drastically, confining individual MSCs within hydrogels or confining monolayers of MSCs within agarose wells can sway MSC lineage commitment, while applying a confining compressive stress to metastatic tumor cells can increase their invasiveness. In this review, we seek to understand the signaling cascades that occur as cells sense confining forces and how that translates to behavioral changes, including elongated and multinucleated cell morphologies, novel migrational mechanisms, and altered gene expression, leading to a unique MSC secretome that could hold great promise for anti-inflammatory treatments. Through comparison of these altered behaviors, we aim to discern how MSCs alter their lineage selection, while tumor cells may become more aggressive and invasive. Synthesizing this information can be useful for employing MSCs for therapeutic approaches through systemic injections or tissue engineered grafts, and developing improved strategies for metastatic cancer therapies.

Cartilage Tissue-Mimetic Pellets with Multifunctional Magnetic Hyaluronic Acid-Graft-Amphiphilic Gelatin Microcapsules for Chondrogenic Stimulation

Articular cartilage defect is a common disorder caused by sustained mechanical stress. Owing to its nature of avascular, cartilage had less reconstruction ability so there is always a need for other repair strategies. In this study, we proposed tissue-mimetic pellets composed of chondrocytes and hyaluronic acid-graft-amphiphilic gelatin microcapsules (HA-AGMCs) to serve as biomimetic chondrocyte extracellular matrix (ECM) environments. The multifunctional HA-AGMC with specific targeting on CD44 receptors provides excellent structural stability and demonstrates high cell viability even in the center of pellets after 14 days culture. Furthermore, with superparamagnetic iron oxide nanoparticles (SPIOs) in the microcapsule shell of HA-AGMCs, it not only showed sound cell guiding ability but also induced two physical stimulations of static magnetic field(S) and magnet-derived shear stress (MF) on chondrogenic regeneration. Cartilage tissue-specific gene expressions of Col II and SOX9 were upregulated in the present of HA-AGMC in the early stage, and HA-AGMC+MF+S held the highest chondrogenic commitments throughout the study. Additionally, cartilage tissue-mimetic pellets with magnetic stimulation can stimulate chondrogenesis and sGAG synthesis.

Therapeutic "Tool" in Reconstruction and Regeneration of Tissue Engineering for Osteochondral Repair

Repairing osteochondral defects to restore joint function is a major challenge in regenerative medicine. However, with recent advances in tissue engineering, the development of potential treatments is promising. In recent years, in addition to single-layer scaffolds, double-layer or multilayer scaffolds have been prepared to mimic the structure of articular cartilage and subchondral bone for osteochondral repair. Although there are a range of different cells such as umbilical cord stem cells, bone marrow mesenchyml stem cell, and others that can be used, the availability, ease of preparation, and the osteogenic and chondrogenic capacity of these cells are important factors that will influence its selection for tissue engineering. Furthermore, appropriate cell proliferation and differentiation of these cells is also key for the optimal repair of osteochondral defects. The development of bioreactors has enhanced methods to stimulate the proliferation and differentiation of cells. In this review, we summarize the recent advances in tissue engineering, including the development of layered scaffolds, cells, and bioreactors that have changed the approach towards the development of novel treatments for osteochondral repair.

Emerging themes and unifying concepts underlying cell behavior regulation by the pericellular space

Cells reside in a complex three-dimensional (3D) microenvironment where physical, chemical, and architectural features of the pericellular space regulate important cellular functions like migration, differentiation, and morphogenesis. A major goal of tissue engineering is to identify which properties of the pericellular space orchestrate these emergent cell behaviors and how. In this review, we highlight recent studies at the interface of biomaterials and single cell biophysics that are lending deeper insight towards this goal. Advanced methods have enabled the decoupling of architectural and mechanical features of the microenvironment, revealing multiple mechanisms of adhesion and mechanosensing modulation by biomaterials. Such studies are revealing important roles for pericellular space degradability, hydration, and adhesion competition in cell shape, volume, and differentiation regulation. STATEMENT OF SIGNIFICANCE: Cell fate and function are closely regulated by the local extracellular microenvironment. Advanced methods at the interface of single cell biophysics and biomaterials have shed new light on regulators of cell-pericellular space interactions by decoupling more features of the complex pericellular milieu than ever before. These findings lend deeper mechanistic insight into how biomaterials can be designed to fine-tune outcomes like differentiation, migration, and collective morphogenesis.

Magnetically Assisted Control of Stem Cells Applied in 2D, 3D and In Situ Models of Cell Migration

The success of cell therapy approaches is greatly dependent on the ability to precisely deliver and monitor transplanted stem cell grafts at treated sites. Iron oxide particles, traditionally used in vivo for magnetic resonance imaging (MRI), have been shown to also represent a safe and efficient in vitro labelling agent for mesenchymal stem cells (MSCs). Here, stem cells were labelled with magnetic particles, and their resulting response to magnetic forces was studied using 2D and 3D models. Labelled cells exhibited magnetic responsiveness, which promoted localised retention and patterned cell seeding when exposed to magnet arrangements in vitro. Directed migration was observed in 2D culture when adherent cells were exposed to a magnetic field, and also when cells were seeded into a 3D gel. Finally, a model of cell injection into the rodent leg was used to test the enhanced localised retention of labelled stem cells when applying magnetic forces, using whole body imaging to confirm the potential use of magnetic particles in strategies seeking to better control cell distribution for in vivo cell delivery.

Biosynthesis of magnetic nanoparticles from nano-degradation products revealed in human stem cells

While magnetic nanoparticles offer exciting possibilities for stem cell imaging or tissue bioengineering, their long-term intracellular fate remains to be fully documented. Besides, it appears that magnetic nanoparticles can occur naturally in human cells, but their origin and potentially endogenous synthesis still need further understanding. In an effort to explore the life cycle of magnetic nanoparticles, we investigated their transformations upon internalization in mesenchymal stem cells and as a function of the cells' differentiation status (undifferentiated, or undergoing adipogenesis, osteogenesis, and chondrogenesis). Using magnetism as a fingerprint of the transformation process, we evidenced an important degradation of the nanoparticles during chondrogenesis. For the other pathways, stem cells were remarkably "remagnetized" after degradation of nanoparticles. This remagnetization phenomenon is the direct demonstration of a possible neosynthesis of magnetic nanoparticles in cellulo and could lay some foundation to understand the presence of magnetic crystals in human cells. The neosynthesis was shown to take place within the endosomes and to involve the H-subunit of ferritin. Moreover, it appeared to be the key process to avoid long-term cytotoxicity (impact on differentiation) related to high doses of magnetic nanoparticles within stem cells.

Topical film prepared with Rhus verniciflua extract-loaded pullulan hydrogel for atopic dermatitis treatment

Atopic dermatitis (AD) is characterized by relapsing pruritus and skin dryness. Due to the pathogenic multiplicity and the adverse effects associated with the current therapeutics, development of transdermal drug delivery system is becoming an area of interest. Here, a novel topical film prepared with Rhus verniciflua extract (RVE)-loaded pullulan hydrogel (RVE@PH) was synthesized and tested its therapeutic efficacy on the AD rats modeled by neonatal capsaicin injection method. The RVE@PH was characterized by a Fourier-transform infrared spectroscopy and an in vitro release assay. Rat pups were randomly divided into two groups: vehicle-treated (VEH; n = 5) and capsaicin-treated (n = 15). The latter were given capsaicin subcutaneously at 24 h after birth for AD induction and further divided into three groups (n = 5 per each): not treated (CAP), pullulan hydrogel-applied (PH), and RVE@PH-applied (RVE-PH). The pullulan hydrogel and RVE@PH were topically applied on shoulder lesions for 14 days (from 42 to 56 days after birth). Their phenotypes were compared based on the dermatitis score, epidermal thickness, mast cell infiltration, and serum myeloperoxidase (MPO) activities. The PH group showed significant attenuation in all the aforementioned values compared to the CAP group, suggesting that pullulan hydrogel itself has therapeutic activity against AD. Notably, the attenuations were more potent in the RVE-PH group than the PH group, indicating that the therapeutic efficacy against AD is augmented by the presence of RVE, a loaded pharmaceutic. Collectively, these results indicate that RVE@PH inhibits AD through exerting the dual roles, that is, the pullulan hydrogel-mediated physical and RVE-mediated pharmaceutical actions. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 2325-2334, 2019.

Role of growth factors and oxygen to limit hypertrophy and impact of high magnetic nanoparticles dose during stem cell chondrogenesis

Due to an unmet clinical need of curative treatments for osteoarthritic patients, tissue engineering strategies that propose the development of cartilage tissue replacements from stem cells have emerged. Some of these strategies are based on the internalization of magnetic nanoparticles into stem cells to then initiate the chondrogenesis via magnetic compaction. A major difficulty is to drive the chondrogenic differentiation of the cells such as they produce an extracellular matrix free of hypertrophic collagen. An additional difficulty has to be overcome when nanoparticles are used, knowing that a high dose of nanoparticles can limit the chondrogenesis. We here propose a gene-based analysis of the effects of chemical factors (growth factors, hypoxia) on the chondrogenic differentiation of human mesenchymal stem cells both with and without nanoparticles. We focus on the synthesis of two of the most important constituents present in the cartilaginous extracellular matrix (Collagen II and Aggrecan) and on the expression of collagen X, the signature of hypertrophic cartilage, in order to provide a quantitative index of the type of cartilage produced (i.e. hyaline, hypertrophic). We demonstrate that by applying specific environmental conditions, gene expression can be directed toward the production of hyaline cartilage, with limited hypertrophy. Besides, a combination of the growth factors IGF-1, TGF-β3, with a hypoxic conditioning remarkably reduced the impact of high nanoparticles concentration.

Scaffold-free, label-free and nozzle-free biofabrication technology using magnetic levitational assembly

Tissue spheroids have been proposed as building blocks in 3D biofabrication. Conventional magnetic force-driven 2D patterning of tissue spheroids requires prior cell labeling by magnetic nanoparticles, meanwhile a label-free approach for 3D magnetic levitational assembly has been introduced. Here we present first time report on rapid assembly of 3D tissue construct using scaffold-free, nozzle-free and label-free magnetic levitation of tissue spheroids. Chondrospheres of standard size, shape and capable to fusion have been biofabricated from primary sheep chondrocytes using non-adhesive technology. Label-free magnetic levitation was performed using a prototype device equipped with permanent magnets in presence of gadolinium (Gd³⁺) in culture media, which enables magnetic levitation. Mathematical modeling and computer simulations were used for prediction of magnetic field and kinetics of tissue spheroids assembly into 3D tissue constructs. First, we used polystyrene beads to simulate the assembly of tissue spheroids and to determine the optimal settings for magnetic levitation in presence of Gd³⁺. Second, we proved the ability of chondrospheres to assemble rapidly into 3D tissue construct in the permanent magnetic field in the presence of Gd³⁺. Thus, scaffold- and label-free magnetic levitation of tissue spheroids is a promising approach for rapid 3D biofabrication and attractive alternative to label-based magnetic force-driven tissue engineering.

Recent advances in bioreactors for cell-based therapies

Bioreactors have become indispensable tools in the cell-based therapy industry. Various forms of bioreactors are used to maintain well-controlled microenvironments to regulate cell growth, differentiation, and tissue development. They are essential for providing standardized, reproducible cell-based products for regenerative medicine applications or to establish physiologically relevant in vitro models for testing of pharmacologic agents. In this review, we discuss three main classes of bioreactors: cell expansion bioreactors, tissue engineering bioreactors, and lab-on-a-chip systems. We briefly examine the factors driving concerted research endeavors in each of these areas and describe the major advancements that have been reported in the last three years. Emerging issues that impact the commercialization and clinical use of bioreactors include (i) the need to scale up to greater cell quantities and larger graft sizes, (ii) simplification of in vivo systems to function without exogenous stem cells or growth factors or both, and (iii) increased control in the manufacture and monitoring of miniaturized systems to better capture complex tissue and organ physiology.

Toward the development of biomimetic injectable and macroporous biohydrogels for regenerative medicine

Repairing or replacing damaged human tissues has been the ambitious goal of regenerative medicine for over 25years. One promising approach is the use of hydrated three-dimensional scaffolds, known as hydrogels, which have had good results repairing tissues in pre-clinical trials. Benefiting from breakthrough advances in the field of biology, and more particularly regarding cell/matrix interactions, these hydrogels are now designed to recapitulate some of the fundamental cues of native environments to drive the local tissue regeneration. We highlight the key parameters that are required for the development of smart and biomimetic hydrogels. We also review the wide variety of polymers, crosslinking methods, and manufacturing processes that have been developed over the years. Of particular interest is the emergence of supramolecular chemistries, allowing for the development of highly functional and reversible biohydrogels. Moreover, advances in computer assisted design and three-dimensional printing have revolutionized the production of macroporous hydrogels and allowed for more complex designs than ever before with the opportunity to develop fully reconstituted organs. Today, the field of biohydrogels for regenerative medicine is a prolific area of research with applications for most bodily tissues. On top of these applications, injectable hydrogels and macroporous hydrogels (foams) were found to be the most successful. While commonly associated with cells or biologics as drug delivery systems to increase therapeutic outcomes, they are steadily being used in the emerging fields of organs-on-chip and hydrogel-assisted cell therapy. To highlight these advances, we review some of the recent developments that have been achieved for the regeneration of tissues, focusing on the articular cartilage, bone, cardiac, and neural tissues. These biohydrogels are associated with improved cartilage and bone defects regeneration, reduced left ventricular dilation upon myocardial infarction and display promising results repairing neural lesions. Combining the benefits from each of these areas reviewed above, we envision that an injectable biohydrogel foam loaded with either stem cells or their secretome is the most promising hydrogel solution to trigger tissue regeneration. A paradigm shift is occurring where the combined efforts of fundamental and applied sciences head toward the development of hydrogels restoring tissue functions, serving as drug screening platforms or recreating complex organs.

Morphological, Immunocytochemical, and Biochemical Studies of Rat Costal Chondrocytes Exposed to IL-1β and TGF-β1

This study was undertaken to determine the effects of IL-1β and TGF-β1 on the expression of differentiation-associated genes in chondrocytes in vitro. Rat costal chondrocytes were exposed to different concentrations of IL-1β and TGF-β1 for 48 h and tested for gene expression. IL-1β increased the expression of aggrecanase-1 and aggrecanase-2 and decreased the content of aggrecan and collagen II. Low concentration of TGF-β1 decreased the expression of aggrecan and collagen II and increased the expression of aggrecanase-2. However, the level of aggrecanase-1 was significantly elevated in the presence of high concentration of TGF-β1. IL-1β and TGF-β1 show the ability to modulate the production of aggrecan and collagen II in chondrocytes in vitro.

A Magnetically Actuated Microscaffold Containing Mesenchymal Stem Cells for Articular Cartilage Repair

This study proposes a magnetically actuated microscaffold with the capability of targeted mesenchymal stem cell (MSC) delivery for articular cartilage regeneration. The microscaffold, as a 3D porous microbead, is divided into body and surface portions according to its materials and fabrication methods. The microscaffold body, which consists of poly(lactic-co-glycolic acid) (PLGA), is formed through water-in-oil-in-water emulsion templating, and its surface is coated with amine functionalized magnetic nanoparticles (MNPs) via amino bond formation. The porous PLGA structure of the microscaffold can assist in cell adhesion and migration, and the MNPs on the microscaffold can make it possible to steer using an electromagnetic actuation system that provides external magnetic fields for the 3D locomotion of the microscaffold. As a fundamental test of the magnetic response of the microscaffold, it is characterized in terms of the magnetization curve, velocity, and 3D locomotion of a single microscaffold. In addition, its function with a cargo of MSCs for cartilage regeneration is demonstrated from the proliferation, viability, and chondrogenic differentiation of D1 mouse MSCs that are cultured on the microscaffold. For the feasibility tests for cartilage repair, 2D/3D targeting of multiple microscaffolds with the MSCs is performed to demonstrate targeted stem cell delivery using the microscaffolds and their swarm motion.

[Effect of polycaprolactone-ascobic acid scaffold in repairing articular cartilage defects in rabbits]

OBJECTIVE

To investigate the effect of polycaprolactone-ascobic acid (PCL-AA) scaffolds in promoting repair of articular cartilage defects in a rabbit model.

METHODS

The cartilage defects (3.5 mm in diameter and 3.0 mm in depth) were created in the trochlear groove of the bilateral knees of eight 6-month-old male New Zealand white rabbits. The rabbit models were then randomized into 3 groups to receive implantation of PCL-AA scaffolds (group A, n=8), implantation of PCL scaffolds without AA (group B, n=5), or no treatment (group C, n=3). In groups A and B, the mixture of fibrin gel (10 µg) and thrombinogen (10 µg) was injected into the defects to fix the scaffolds during the surgery. Histological analyses and quantitative assessments of defect repair were conducted at 6 and 12 weeks after implantation of the scaffold.

RESULTS

At 6 weeks after scaffold implantation, macroscopic observation showed better filling of the cartilage defects in group A than in group B, while no obvious defect repair was observed in group C. The rabbits in group A showed a significant improvement of the Wakitani score than those in group B (4.05∓1.11 vs 7.05∓0.98, P<0.05). HE staining revealed the presence of newly generated cells in and around the PCL-AA scaffolds without inflammatory cells. Safranin O staining showed a significantly greater ECM of the newly regenerated tissue in groups A and B than in group C (P<0.05), and the volume of the regenerated cartilage and cells was significantly greater in group A than in group B (P<0.05). Samples harvested at 12 weeks showed more hyalione-like cartilage formation than that at 6 weeks in group A.

CONCLUSION

PCL-AA scaffolds have a good biocompatibility and promotes the healing of articular cartilage defects. Adding ascorbic acid into PCL scaffolds better promotes cartilage formation in terms of both quantity and quality of the regenerated tissues. PCL-AA scaffolds can serve as a promising biomaterial to promote the regeneration of articular cartilage using tissue engineering techniques.

3D Magnetic Stem Cell Aggregation and Bioreactor Maturation for Cartilage Regeneration

Cartilage engineering remains a challenge due to the difficulties in creating an in vitro functional implant similar to the native tissue. An approach recently explored for the development of autologous replacements involves the differentiation of stem cells into chondrocytes. To initiate this chondrogenesis, a degree of compaction of the stem cells is required; hence, we demonstrated the feasibility of magnetically condensing cells, both within thick scaffolds and scaffold-free, using miniaturized magnetic field sources as cell attractors. This magnetic approach was also used to guide aggregate fusion and to build scaffold-free, organized, three-dimensional (3D) tissues several millimeters in size. In addition to having an enhanced size, the tissue formed by magnetic-driven fusion presented a significant increase in the expression of collagen II, and a similar trend was observed for aggrecan expression. As the native cartilage was subjected to forces that influenced its 3D structure, dynamic maturation was also performed. A bioreactor that provides mechanical stimuli was used to culture the magnetically seeded scaffolds over a 21-day period. Bioreactor maturation largely improved chondrogenesis into the cellularized scaffolds; the extracellular matrix obtained under these conditions was rich in collagen II and aggrecan. This work outlines the innovative potential of magnetic condensation of labeled stem cells and dynamic maturation in a bioreactor for improved chondrogenic differentiation, both scaffold-free and within polysaccharide scaffolds.