Electrophoretic deposition of colloidal particles on Mg with cytocompatibility, antibacterial performance, and corrosion resistance

Electrophoretically deposited titanium and its alloys in biomedical engineering: Recent progress and remaining challenges

Over the past decade, titanium implants have gained popularity as the number of performed implantation operations has significantly increased. There are a number of methods for modifying the surface of biomaterials, which are aimed at extending the life of titanium implants. The developments in this field in recent years have required a comprehensive discussion of all the properties of electrophoretically deposited coatings on titanium and its alloys, taking into account their bioactivity. The development that took place in this field in recent years required a comprehensive discussion of all the properties of coatings electrophoretically deposited on titanium and its alloys, with particular emphasis on their bioactivity. Herein, we attempt to assess the influence of the electrophoretic deposition (EPD) process parameters on these coatings' biological and mechanical properties. Particular attention has been addressed to the in-vitro and in-vivo studies conducted hitherto. We have seen an increased interest in using titanium alloys without the addition of toxic compounds and gaps in the EPD field such as the uncommon endeavors to develop a "Design of experiments" approach as well as the lack of assessment of the surface free energy and detailed topography of electrophoretically deposited coatings. The exact correlation of coating properties with EPD process parameters still seems explicitly not understood, necessitating more future investigations. Ipso facto, the exact mechanism of particle agglomeration and Hamaker's law need to be fathomable.

Integrated MOF-74 Coatings on Magnesium for Corrosion Control, Cytocompatibility, and Antibacterial Properties

Biodegradable Mg and its alloys can degrade safely in vivo without toxicity. The major bottleneck inhibiting their clinical use is the high corrosion rate, which leads to the loss of mechanical integrity prematurely and bad biocompatibility. One ideal strategy is the modification with anticorrosive and bioactive coatings. Numerous metal-organic framework (MOF) membranes show satisfactory anticorrosion performance and biocompatibility. In this study, MOF-74 membranes are prepared on an NH₄TiOF₃ (NTiF) layer-modified Mg matrix, fabricating integrated bilayer coatings (MOF-74/NTiF) for corrosion control, cytocompatibility, and antibacterial properties. The inner NTiF layer serves as the primary protection for the Mg matrix and a stable surface for the growth of MOF-74 membranes. The outer MOF-74 membranes further enhance corrosion protection, whose crystals and thicknesses can be adjusted for different protective effects. Owing to superhydrophilic, micro-nanostructural, and nontoxic decomposition products, MOF-74 membranes significantly promote cell adhesion and proliferation, showing excellent cytocompatibility. Utilizing the decomposition of MOF-74 to generate the products of Zn²⁺ and 2,5-dihydroxyterephthalic acid can effectively inhibit Escherichia coli and Staphylococcus aureus, displaying highly efficient antibacterial properties. The research may shed valuable strategies for MOF-based functional coatings in the applications of biomedicine fields.

A Superior Corrosion Protection of Mg Alloy via Smart Nontoxic Hybrid Inhibitor-Containing Coatings

The increase of corrosion resistance of magnesium and its alloys by forming the smart self-healing hybrid coatings was achieved in this work in two steps. In the first step, using the plasma electrolytic oxidation (PEO) treatment, a ceramic-like bioactive coating was synthesized on the surface of biodegradable MA8 magnesium alloy. During the second step, the formed porous PEO layer was impregnated with a corrosion inhibitor 8-hydroxyquinoline (8-HQ) and bioresorbable polymer polycaprolactone (PCL) in different variations to enhance the protective properties of the coating. The composition, anticorrosion, and antifriction properties of the formed coatings were studied. 8-HQ allows controlling the rate of material degradation due to the self-healing effect of the smart coating. PCL treatment of the inhibitor-containing layer significantly improves the corrosion and wear resistance and retains an inhibitor in the pores of the PEO layer. It was revealed that the corrosion inhibitor incorporation method (including the number of steps, impregnation, and the type of solvent) significantly matters to the self-healing mechanism. The hybrid coatings obtained by a 1-step treatment in a dichloromethane solution containing 6 wt.% polycaprolactone and 15 g/L of 8-HQ are characterized by the best corrosion resistance. This coating demonstrates the lowest value of corrosion current density (3.02 × 10−7 A cm−2). The formation of the hybrid coating results in the corrosion rate decrease by 18 times (0.007 mm year−1) as compared to the blank PEO layer (0.128 mm year−1). An inhibitor efficiency was established to be 83.9%. The mechanism of corrosion protection of Mg alloy via smart hybrid coating was revealed.

Advances in the development of biodegradable coronary stents: A translational perspective

Implantation of cardiovascular stents is an important therapeutic method to treat coronary artery diseases. Bare-metal and drug-eluting stents show promising clinical outcomes, however, their permanent presence may create complications. In recent years, numerous preclinical and clinical trials have evaluated the properties of bioresorbable stents, including polymer and magnesium-based stents. Three-dimensional (3D) printed-shape-memory polymeric materials enable the self-deployment of stents and provide a novel approach for individualized treatment. Novel bioresorbable metallic stents such as iron- and zinc-based stents have also been investigated and refined. However, the development of novel bioresorbable stents accompanied by clinical translation remains time-consuming and challenging. This review comprehensively summarizes the development of bioresorbable stents based on their preclinical/clinical trials and highlights translational research as well as novel technologies for stents (e.g., bioresorbable electronic stents integrated with biosensors). These findings are expected to inspire the design of novel stents and optimization approaches to improve the efficacy of treatments for cardiovascular diseases.

•

Bioresorbable stents can overcome the limitations of non-degradable stents.

•

3D printing of shape-memory polymeric stents can lead to better clinical outcomes.

•

Advances in Mg-, Fe- and Zn-based stents from a translational perspective.

•

Electronic stents integrated with biosensors can covey stent status in real time.

•

Development in the assessment of stent performance in vivo.

Simultaneously stimulated osteogenesis and anti-bacteria of physically cross-linked double-network hydrogel loaded with MgO-Ag2O nanocomposites

Hydrogels, with a three-dimensional network of water-soluble polymer and water, could simulate the critical properties of extracellular matrix, which has been widely used in bone tissue engineering. However, most of conventional hydrogels for bone regeneration are fragile and have poor osteogenic activity, which restricts their applications. In this work, a novel nanoparticle-hydrogel composite consisting of physically cross-linked double-network loaded with MgO-Ag₂O nanocomposites was developed by the sol-gel method. The Mg²⁺ released from MgO-Ag₂O nanocomposites was used as an ionic cross-linking site of sodium alginate (SA), while the hydrophobic micelles in the polyacrylamide (PAAM) network is acted as another crosslinking point. The results indicated that the novel nanoparticle-hydrogel composites had good self-recovery ability and excellent mechanical properties compared with the conventional sodium alginate (SA)/polyacrylamide (PAAM) hydrogels. Additionally, it showed a slow release of Mg and Ag ions due to the dual function of the embedding effect of hydrogels and the increasing pH of the solution induced by the hydrolysis of sodium alginate. In terms of in vitro tests, the nanoparticle-hydrogel composites showed significantly stimulatory effects on the proliferation and differentiation of SaOS-2 cells. In addition, the antibacterial effects of the nanoparticle-hydrogel composites were gradually enhanced with the increase of MgO-Ag₂O content.

Improved Muscle Regeneration into a Joint Prosthesis with Mechano-Growth Factor Loaded within Mesoporous Silica Combined with Carbon Nanotubes on a Porous Titanium Alloy

Total joint replacement (TJR) is widely applied as a promising treatment for the reconstruction of serious joint diseases but is usually characterized by critical loss of skeletal muscle attachment to metal joint prostheses, resulting in fibrous scar tissue formation and subsequent motor dysfunction. Tissue engineering technology may provide a potential strategy for skeletal muscle regeneration into metal joint prostheses. Here, a porous titanium (Ti) alloy scaffold coated with carbon nanotubes (CNTs) and mesoporous silica nanoparticles (MSNs) through electrophoretic deposition (EPD) was designed as a mechano-growth factor (MGF) carrier. This two-layered coating exhibits a nanostructured topology, excellent MGF loading, and prolonged release performance via covalent bonding to improve myoblast adhesion, proliferation and myogenic differentiation in porous Ti alloy scaffolds without cytotoxicity. The Akt/mTOR signaling pathway plays a key role in this process. Furthermore, in vivo studies show that the scaffold promotes the growth of muscle, rather than fibrotic tissue, into the porous Ti alloy structure and improves muscle-derived mechanical properties, the migration of satellite cells, and possibly immunomodulation. In summary, this nanomaterial-coated scaffold provides a practical biomaterial platform to regenerate periprosthetic muscle tissue and restore comparable motor function to that of the natural joint.

Tannic acid: a versatile polyphenol for design of biomedical hydrogels

Tannic acid (TA), a natural polyphenol, is a hydrolysable amphiphilic tannin derivative of gallic acid with several galloyl groups in its structure. Tannic acid interacts with various organic, inorganic, hydrophilic, and hydrophobic materials such as proteins and polysaccharides via hydrogen bonding, electrostatic, coordinative bonding, and hydrophobic interactions. Tannic acid has been studied for various biomedical applications as a natural crosslinker with anti-inflammatory, antibacterial, and anticancer activities. In this review, we focus on TA-based hydrogels for biomaterials engineering to help biomaterials scientists and engineers better realize TA's potential in the design and fabrication of novel hydrogel biomaterials. The interactions of TA with various natural or synthetic compounds are deliberated, discussing parameters that affect TA-material interactions thus providing a fundamental set of criteria for utilizing TA in hydrogels for tissue healing and regeneration. The review also discusses the merits and demerits of using TA in developing hydrogels either through direct incorporation in the hydrogel formulation or indirectly via immersing the final product in a TA solution. In general, TA is a natural bioactive molecule with diverse potential for engineering biomedical hydrogels.

Recent progress in Tannic Acid-driven antimicrobial/antifouling surface coating strategies

Medical devices and surgical implants are a necessary part of tissue engineering and regenerative medicines. However, the biofouling and microbial colonization on the implant surface continues to be a major...

Advances in coatings on magnesium alloys for cardiovascular stents - A review

Magnesium (Mg) and its alloys, as potential biodegradable materials, have drawn wide attention in the cardiovascular stent field because of their appropriate mechanical properties and biocompatibility. Nevertheless, the occurrence of thrombosis, inflammation, and restenosis of implanted Mg alloy stents caused by their poor corrosion resistance and insufficient endothelialization restrains their anticipated clinical applications. Numerous surface treatment tactics have mainly striven to modify the Mg alloy for inhibiting its degradation rate and enduing it with biological functionality. This review focuses on highlighting and summarizing the latest research progress in functionalized coatings on Mg alloys for cardiovascular stents over the last decade, regarding preparation strategies for metal oxide, metal hydroxide, inorganic nonmetallic, polymer, and their composite coatings; and the performance of these strategies in regulating degradation behavior and biofunction. Potential research direction is also concisely discussed to help guide biological functionalized strategies and inspire further innovations. It is hoped that this review can give assistance to the surface modification of cardiovascular Mg-based stents and promote future advancements in this emerging research field.

Anti-tumour activity of Mg-6%Ag and Mg-10%Gd alloys in mice with inoculated melanoma

Cytotoxicity in vitro and anti-tumour activity in vivo of magnesium alloys Mg-6%Ag and Mg-10%Gd was studied. It was shown that specifically designed and thermomechanically processed Mg alloys produced a sizeable cytotoxic effect on PC-3 line tumour cells in vitro through inhibition of their proliferation. A pronounced grain refinement in combination with the formation of second phases and precipitates attained by means of equal-channel angular pressing (ECAP) accellerated the degradation and gave rise to enhanced anti-tumour activity of both alloys. The gadolinium-containing alloy outperformed the silver-containing one substantially. In an in vivo assay, intratumoural implantation of pins made from both alloys in the homogenised and the ECAP states in mice with inoculated B16 melanoma gave rise to an indubitable anti-tumour effect. It was documented in a decrease of Ki-67(+) cells and the occurrence of regions of destruction of tumoural tissue that were filled with gas evolving in the course of biodegradation of the implants. The data obtained suggest that intratumoural implantation of gadolinium-containing magnesium alloys can be considered for therapy of inoperable or chemoresistant forms of cancer.

A biodegradable, mechanically tunable micro-arc oxidation AZ91D-based composite implant with calcium phosphate/chitosan coating promotes long-term bone tissue regeneration

BACKGROUND

To reduce the biodegradable rate and develop the long-term osteogenic ability of magnesium (Mg) alloy, we prepared a new biodegradable micro arc oxidation AZ91D-based composite implant with calcium phosphate/chitosan coating (CaP-CS/MAO/AZ91D) and investigated its mechanical property and long-term bone tissue regeneration ability.

MAIN METHODS AND MAJOR RESULTS

The results showed that the binding force and bioactivity of CaP-CS/MAO/AZ91D was better when the ratio of water to ethanol was 4:6 and MAO constant current was 0.1 A cm^-2 . Compressive strengths of 4:6 sample were more than 1300 N when the soaking time was increased to 21 days. CaP-CS/MAO/AZ91D extracts promoted differentiation and proliferation of rat mesenchymal stem cells (RMSC), which achieved higher proliferation rates over 16 days of culture and exhibited early alkaline phosphatase activity and late bone sialoprotein markers.

CONCLUSIONS AND IMPLICATIONS

CaP-CS/MAO/AZ91D was established to promote RMSC osteogenic differentiation within a proper range for at least 90 days through Wnt/β-catenin pathway activation, which would allow sufficient time for bone healing. Collectively, our findings suggest that the CaP-CS/MAO/AZ91D coating could not only reduce the corrosion rate and lead to better long-term biocompatibility but also promote osteogenic mineralization.

In Vitro Macrophage Immunomodulation by Poly(ε-caprolactone) Based-Coated AZ31 Mg Alloy

Due to its excellent bone-like mechanical properties and non-toxicity, magnesium (Mg) and its alloys have attracted great interest as biomaterials for orthopaedic applications. However, their fast degradation rate in physiological environments leads to an acute inflammatory response, restricting their use as biodegradable metallic implants. Endowing Mg-based biomaterials with immunomodulatory properties can help trigger a desired immune response capable of supporting a favorable healing process. In this study, electrospun poly(ε-caprolactone) (PCL) fibers loaded with coumarin (CM) and/or zinc oxide nanoparticles (ZnO) were used to coat the commercial AZ31 Mg alloy as single and combined formulas, and their effects on the macrophage inflammatory response and osteoclastogenic process were investigated by indirect contact studies. Likewise, the capacity of the analyzed samples to generate reactive oxygen species (ROS) has been investigated. The data obtained by attenuated total reflection Fourier-transform infrared (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS) analyses indicate that AZ31 alloy was perfectly coated with the PCL fibers loaded with CM and ZnO, which had an important influence on tuning the release of the active ingredient. Furthermore, in terms of degradation in phosphate-buffered saline (PBS) solution, the PCL-ZnO- and secondary PCL-CM-ZnO-coated samples exhibited the best corrosion behaviour. The in vitro results showed the PCL-CM-ZnO and, to a lower extent, PCL-ZnO coated sample exhibited the best behaviour in terms of inflammatory response and receptor activator of nuclear factor kappa-B ligand (RANKL)-mediated differentiation of RAW 264.7 macrophages into osteoclasts. Altogether, the results obtained suggest that the coating of Mg alloys with fibrous PCL containing CM and/or ZnO can constitute a feasible strategy for biomedical applications.

In vivo evaluation of bending strengths and degradation rates of different magnesium pin designs for oral stapler

Magnesium alloys have been potential biodegradable implants in the areas of bone, cardiovascular system, gastrointestinal tract, and so on. The purpose of this study is to evaluate Mg-2Zn alloy degradation as a potential suture material. The study included Sprague-Dawley (SD) rats in vivo. In 24 male SD rats, tests in the leg muscle were conducted using traditional surgical incision and insertion of magnesium alloys of different designs into the tissue. The material degradation topography, elemental composition, and strength of the pins were analyzed. This paper explores magnesium pins with different cross-sectional shapes and diameters to establish a suitable pin diameter and shape for use as an oral stapler, which must have a good balance of degradation rate and strength. The results showed there were good bending strengths over different degradation periods in groups with diameters of 0.8 mm and 0.5 mm, and no significantly different bending strength between the groups of triangle and round cross-section shapes with same diameter of 0.3 mm, although the degradation rate still needs to be improved.

Corrosion Behavior and Biological Activity of Micro Arc Oxidation Coatings with Berberine on a Pure Magnesium Surface

Bone tissue repair materials can cause problems such as inflammation around the implant, slow bone regeneration, and poor repair quality. In order to solve these problems, a coating was prepared by ultrasonic micro-arc oxidation and self-assembly technology on a pure magnesium substrate. We studied the effect of berberine on the performance of the ultrasonic micro-arc oxidation/polylactic acid and glycolic acid copolymer/berberine (UMAO/PLGA/BR) coating. The chemical and morphological character of the coating was analyzed using scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The corrosion properties were studied by potentiodynamic polarization and electrochemical impedance spectroscopy in a simulated body fluid. The cumulative release of drugs was tested by high-performance liquid chromatography. The results indicate that different amounts of BR can seal the corrosion channel to different extents. These coatings have a self-corrosion current density (Icorr) at least one order of magnitude lower than the UMAO coatings. When the BR content is 3.0 g/L, the self-corrosion current density of the UMAO/PLGA/BR coatings is the lowest (3.14 × 10−8 A/cm2) and the corrosion resistance is improved. UMAO/PLGA/BR coatings have excellent biological activity, which can effectively solve the clinical problem of rapid degradation of pure magnesium and easy infection.

Advances in Antibacterial Functionalized Coatings on Mg and Its Alloys for Medical Use—A Review

As a revolutionary implant material, magnesium and its alloys have many exciting performances, such as biodegradability, mechanical compatibility, and excellent biosecurity. However, the rapid and uncontrollable degradation rate of magnesium greatly hampers its clinical use. Many efforts have been taken to enhance the corrosion resistance of magnesium. However, it must be noted that improving the corrosion resistance of magnesium will lead to the compromise of its antibacterial abilities, which are attribute and proportional to the alkaline pH during its degradation. Providing antibacterial functionalized coating is one of the best methods for balancing the degradation rate and the antibacterial ability of magnesium. Antibacterial functionalized magnesium is especially well-suited for patients with diabetes and infected wounds. Considering the extremely complex biological environment in the human body and the demands of enhancing corrosion resistance, biocompatibility, osteogenesis, and antibacterial ability, composite coatings with combined properties of different materials may be promising. The aim of this review isto collect and compare recent studies on antibacterial functionalized coatings on magnesium and its alloys. The clinical applications of antibacterial functionalized coatings and their material characteristics, antibacterial abilities, in vitro cytocompatibility, and corrosion resistance are also discussed in detail.

Photo-Cross-Linked Polycarbonate Coating with Surface-Erosion Behavior for Corrosion Resistance and Cytocompatibility Enhancement of Magnesium Alloy

Absorbable magnesium (Mg) materials are promising for medical implant applications. However, their corrosion rate and potential toxicity remain a challenge. Herein, a photo-cross-linked coating with suitable durability and unique surface-eroding behavior for enhancement of anticorrosion property and cytocompatibility of AZ31 Mg alloy was developed. The biodegradable allyl-functional polycarbonate, poly[(5-methyl-5-allyloxycarbonyl-1,3-propanediol carbonate)-co-(trimethylene carbonate)] [P(MAC-co-TMC), PMT], was first synthesized by ring-opening copolymerization. The PMT copolymer, pentaerythritol tetrakis(3-mercaptopropionate), and a photoinitiator were then applied on AZ31 Mg alloy by dip coating, and these films were cross-linked via the subsequent photoinitiated thiol-ene click reaction. The poly(l-lactide) (PLLA) and poly(1,3-trimethylene carbonate) (PTMC) coatings without cross-linking were prepared and used as control. Our results show that the cross-linked PMT coatings exhibited superior mechanical properties compared with PLLA and PTMC coatings. Meanwhile, the surface-erosion behavior of the cross-linked PMT coatings remained, as confirmed by scanning electron microscopy analysis. As a result, the cross-linked PMT-coated Mg alloy showed lower corrosion rates, better in vitro corrosion resistance, and much lower cytotoxicity, compared with bare Mg and ones coated with PLLA and PTMC coatings. Results indicate that the cross-linked PMT coatings with unique surface-erosion behavior and good cytocompatibility might be promising to improve the safety and success rate of Mg-based devices and implants.

Electrodeposited Assembly of Additive-Free Silk Fibroin Coating from Pre-Assembled Nanospheres for Drug Delivery

Electrophoretically deposited (EPD) polymer-based coatings have been extensively reported as reservoirs in medical devices for delivery of therapeutic agents, but control over drug release remains a challenge. Here, a simple but uncommon assembly strategy for EPD polymer coatings was proposed to improve drug release without introducing any additives except the EPD matrix polymer precursor. The added value of the proposed strategy was demonstrated by developing a novel EPD silk fibroin (SF) coating assembled from pre-assembled SF nanospheres for an application model, that is, preventing infections around percutaneous orthopedic implants via local delivery of antibiotics. The EPD mechanism of this nanosphere coating involved oxidation of water near the substrate to neutralize SF nanospheres, resulting in irreversible deposition. The deposition process and mass could be easily controlled using the applied EPD parameters. In comparison with the EPD SF coating assembled in a conventional way (directly obtained from SF molecule solutions), this novel coating had a similar adhesion strength but exhibited a more hydrophobic nanotopography to induce better fibroblastic response. Moreover, the use of nanospheres as building blocks enabled 1.38 and 21 times enhancement on the antibiotic release amount and time (of 95% maximum dug release), respectively, while retaining drug effectiveness and showing undetectable cytotoxicity. This unexpected release kinetics was found attributable to the electrostatic and hydrophobic interactions between the drug and nanospheres and a negligible initial dissolution effect on the nanosphere coating. These results illustrate the promising potential of the pre-assembled strategy on EPD polymer coatings for superior control over drug delivery.

Corrosion Resistance and Biocompatibility Assessment of a Biodegradable Hydrothermal-Coated Mg-Zn-Ca Alloy: An in Vitro and in Vivo Study

A hydrothermal (HT) coating was applied to the biomedical Mg-Zn-Ca alloy surface by microarc oxidation (MAO) and heat treatment. Then, the corrosion resistance and biocompatibility of the coated alloy was evaluated in vitro and in vivo. The corrosion rate (CR) of HT-coated implants was significantly lower in experiment. In addition, this CR increased over time in vivo but was stable, albeit higher, in vitro. The proliferation, adhesion, and live activity of bone marrow stem cells (BMSCs) were significantly greater on the surface of the HT-coated Mg alloy in vitro. Serum Mg²⁺ was always within the normal range in rabbits with implants, although Ca²⁺ was higher than normal for both uncoated and coated scaffolds. There were no significant pathological effects on the main organs of alloy-implanted rabbits compared with healthy animals. Thus, the HT coating significantly improved the corrosion resistance and biocompatibility of the Mg-Zn-Ca alloy.

Strategies to Prevent Biofilm Infections on Biomaterials: Effect of Novel Naturally-Derived Biofilm Inhibitors on a Competitive Colonization Model of Titanium by Staphylococcus aureus and SaOS-2 Cells

Biofilm-mediated infection is a major cause of bone prosthesis failure. The lack of molecules able to act in biofilms has driven research aimed at identifying new anti-biofilm agents via chemical screens. However, to be able to accommodate a large number of compounds, the testing conditions of these screenings end up being typically far from the clinical scenario. In this study, we assess the potential applicability of three previously discovered anti-biofilm compounds to be part of implanted medical devices by testing them on in vitro systems that more closely resemble the clinical scenario. To that end, we used a competition model based on the co-culture of SaOS-2 mammalian cells and Staphylococcus aureus (collection and clinical strains) on a titanium surface, as well as titanium pre-conditioned with high serum protein concentration. Additionally, we studied whether these compounds enhance the previously proven protective effect of pre-incubating titanium with SaOS-2 cells. Out of the three, DHA1 was the one with the highest potential, showing a preventive effect on bacterial adherence in all tested conditions, making it the most promising agent for incorporation into bone implants. This study emphasizes and demonstrates the importance of using meaningful experimental models, where potential antimicrobials ought to be tested for the protection of biomaterials in translational applications.

Mg-Phenolic Network Strategy for Enhancing Corrosion Resistance and Osteocompatibility of Degradable Magnesium Alloys

Magnesium-based alloys are the most widely used materials for degradable metallic implants and have considerable potential for bone applications owing to their excellent stimulating effect on osteogenesis. However, their high corrosion rate limits their structural stability and causes oxygen deficiency and an excessive increase in the pH around the defect area during bone healing. Magnesium oxides, which are the main corrosion products of Mg, are nontoxic materials with useful effects on new bone formation and pH neutralization. Metal-phenolic networks were introduced recently as a cost-effective and efficient surface modifier and were fabricated by deposition of nanosized metal oxides on different types of substrates using the chemical reaction between phenolic groups and metallic ions. In this study, magnesium oxide films were formed successfully on a Mg-based substrate using Mg-phenolic networks. The effects of various coating parameters on the surface morphology, corrosion resistance, degradation behavior, wettability, and osteocompatibility of degradable metallic materials after surface modification with Mg-phenolic networks were thoroughly investigated for the first time. The results showed that the initial concentration of Mg ions was the main parameter affecting the corrosion resistance, which was almost as much as 3 times that of uncoated samples. Additionally, cytotoxicity and viability assessment and observation of the morphological changes in bonelike cells showed that the in vitro osteocompatibility was significantly enhanced by coatings with Mg concentrations of 2.4-3.6 mg mL-1. Finally, in vivo animal studies using the rat calvarial defect model confirmed that the proposed coating method mitigated the formation of gas cavities around the implantation area by reducing the corrosion rate of the Mg-based implant. The nanosized metal oxides produced by the Mg-phenolic network significantly improved the biodegradability and osteocompatibility of Mg alloys, suggesting a potential approach to advancing the clinical application of Mg alloys.

Degradable magnesium-based alloys for biomedical applications: The role of critical alloying elements

Magnesium-based alloys exhibit biodegradable, biocompatible and excellent mechanical properties which enable them to serve as ideal candidate biomedical materials. In particular, their biodegradable ability helps patients to avoid a second surgery. The corrosion rate, however, is too rapid to sustain the healing process. Alloying is an effective method to slow down the corrosion rate. However, currently magnesium alloys used as biomaterials are mostly commercial alloys without considering cytotoxicity from the perspective of biosafety. This article comprehensively reviews the status of various existing and newly developed degradable magnesium-based alloys specially designed for biomedical application. The effects of critical alloying elements, compositions, heat treatment and processing technology on the microstructure, mechanical properties and corrosion resistance of magnesium alloys are discussed in detail. This article covers Mg-Ca based, Mg-Zn based, Mg-Sr based, Mg-RE based and Mg-Cu-based alloy systems. The novel methods of fabricating Mg-based biomaterials and surface treatment on Mg based alloys for potential biomedical applications are summarized.

Osteoimmunomodulation, osseointegration, and in vivo mechanical integrity of pure Mg coated with HA nanorod/pore-sealed MgO bilayer

Fast degradation of Mg-based implants results in the loss of mechanical integrity and poor osseointegration. Herein, a bilayer-structured coating (termed as HAT), comprising an outer layer of hydroxyapatite (HA) nanorods and an inner layer of pores-sealed MgO with HA/Mg(OH)2, was formed on Mg using plasma electrolytic oxidation and hydrothermal treatment. Osteoimmunomodulation, osseointegration, mechanical integrity, and bone-implant interfacial structure evolution of the HAT-coated Mg were investigated by implantation in rabbit femora, together with Mg coated with plasma electrolytic oxidized porous MgO (termed as PEO0) and bare Mg. As compared to PEO0-coated and bare Mg, HAT-coated Mg greatly downregulated pro-inflammatory TNF-α and IL-1β, upregulated anti-inflammatory IL-10, and suppressed osteoclastogenesis, modulating the surrounding microenvironment toward favoring the recruitment of osteogenetic cells. Moreover, HAT-coated Mg accelerated bone sialoprotein and osteopontin secretion of osteogenetic cells and their mineralization to form a cement line matrix. It also promoted the differentiation of osteogenetic cells, secretion of collagen overlying on the cement line matrix, inducing an earlier and more pronounced bone matrix formation. The cement line matrix wrapped the HA nanorods and filled the interrod spaces of the HAT coating, forming strong interdigitation at the bone-coating interface, and therefore, yielding enhanced osseointegration by means of contact osteogenesis. Due to the considerably reduced corrosion of Mg by the pores-sealed bilayer structure of HAT coating, HAT-coated Mg maintained the mechanical integrity for a longer duration than PEO0-coated and bare Mg. It is clarified that the degradation of MgO and HA, rather than delamination, was the vanishing mode of PEO0 and HAT coatings during long-term implantation, avoiding osteolysis induced by the delamination-generated particles.

Polymeric nanoparticles-based multi-functional coatings on NiTi alloy with nickel ion release control, cytocompatibility, and antibacterial performance

Photo-cross-linked quaternized copolymer coatings on NiTi alloy show prominent inhibition of nickel ion release and antibacterial properties.

The "Race for the Surface" experimentally studied: In vitro assessment of Staphylococcus spp. adhesion and preosteoblastic cells integration to doped Ti-6Al-4V alloys

OBJECTIVE

Implant-related infection is a devastating complication in orthopedic surgery. Aiming to minimize this problem, many material modifications have been developed. Here we report a study of a surface modification of Ti-6 Al-4 V alloy using a methodology that enables the study of interactions between bacteria and the material in the presence of eukaryotic cells.

METHODS

We mixed different concentrations of collection or clinical strains of staphylococci isolated from implant-related infections with preosteoblastic cells using a previously published methodology, analyzing the minimal concentration of bacteria able to colonize the surface of the material through image analysis. Ti-6 Al-4 V alloy was modified by anodization to obtain two F-doped nanostructured surfaces that have been previously described to have antibacterial properties.

RESULTS

Our results show similar bacterial adhesion results to nanoporous and nanotubular F-doped surfaces. The presence of preosteoblastic cells increases the adherence of all bacterial strains to both structures. No effect of the surface on eukaryotic cells adherence was detected.

CONCLUSION

To our knowledge, this is the first time that anin vitro study emulating the race for the surface evaluates and compares the osseointegration and antibacterial properties between two nanostructured- modified titanium alloy surfaces. Clinical strains show different behavior from collection ones in bacterial adherence. The presence of cells increased bacterial adherence. NP and NT surface modifications didn´t show significant differences in bacterial adhesion and preosteoblastic cells integration.

Advances in functionalized polymer coatings on biodegradable magnesium alloys - A review

Magnesium (Mg) and its alloys have become a research frontier in biodegradable materials owing to their superior biocompatibility and excellent biomechanical compatibility. However, their high degradation rate in the physiological environment should be well tackled prior to clinical applications. This review summarizes the latest progress in the development of polymeric coatings on biodegradable Mg alloys over the last decade, regarding preparation strategies for polylactic acid (PLA), poly (latic-co-glycolic) acid (PLGA), polycaprolactone (PCL), polydopamine (PDA), chitosan (CS), collagen (Col) and their composite, and their performance in terms of corrosion resistance and biocompatibility. Feasible perspectives and developing directions of next generation of polymeric coatings with respect to biomedical Mg alloys are briefly discussed.

STATEMENT OF SIGNIFICANCE

Magnesium (Mg) and its alloys have become a research frontier in biodegradable materials owing to their superior biocompatibility and suitable biomechanical compatibility. However, the principal drawback of Mg-based implants is their poor corrosion resistance in physiological environments. Hence, it is vital to mitigate the degradation/corrosion behavior of Mg alloys for safe biomedical deployments. This review summarizes the latest progress in development of polymeric coatings on biomedical Mg alloys regarding preparation strategy, corrosion resistance and biocompatibility, including polylactic acid (PLA), poly (latic-co-glycolic) acid (PLGA), polycaprolactone (PCL), chitosan (CS), polydopamine (PDA), collagen (Col) and their composite. In addition, functionalized polymer coatings with Mg alloys exhibits a promising prospect owing to their ability of degradation along with biocompatibility, self-healing, drug-delivery and osteoinduction.

Corrosion protection of AZ31 alloy and constrained bacterial adhesion mediated by a polymeric coating obtained from a phytocompound

The prevention of microbial biofilm formation on a biomaterial surface is crucial in avoiding implants failures and the development of antibiotic resistant bacteria. It was reported that biodegradable Mg alloys may show antimicrobial effects due to the alkalinization of the corroding area. However, this issue is controversial and deserves a detailed study, since the processes occurring at the [biodegradable metal/biological medium] interface are complex and varied. Results showed that bacterial adhesion on AZ31 was lower than that of the titanium control and revealed that was dependent on surface composition, depicting some preferential sites for bacterial attachment (C-, P-, O-containing corrosion products) and others that are particularly avoided (active corrosion sites). As a key challenge, a strategy able to improve the performance of Mg alloys by both, reducing the formation of corrosion products and inhibiting bacterial adhesion was subsequently developed. A polymeric layer (polyTOH) was obtained by electropolymerization of thymol (TOH), a phytophenolic compound. The polyTOH can operate as a multifunctional film that improves the surface characteristics of the AZ31 Mg alloy by enhancing corrosion resistance (ions release was reduced to almost the half during the first days) and create an anti-adherent surface (bacterial attachment was 30-fold lower on polyTOH-AZ31 than on non-coated Mg alloy and 200-fold lower than Ti control and was constrained to specific regions). This anti-adherent property implies an additional advantage: enhancement of the efficacy of antibiotic treatments.

Magnetically actuated mechanical stimuli on Fe3O4/mineralized collagen coatings to enhance osteogenic differentiation of the MC3T3-E1 cells

Mechanical stimuli at the bone-implant interface are considered to activate the mechanotransduction pathway of the cell to improve the initial osseointegration establishment and to guarantee clinical success of the implant. However, control of the mechanical stimuli at the bone-implant interface still remains a challenge. In this study, we have designed a strategy of a magnetically responsive coating on which the mechanical stimuli is controlled because of coating deformation under static magnetic field (SMF). The iron oxide nanoparticle/mineralized collagen (IOP-MC) coatings were electrochemically codeposited on titanium substrates in different quantities of IOPs and distributions; the resulting coatings were verified to possess swelling behavior with flexibility same as that of hydrogel. The relative quantity of IOP to collagen and the IOP distribution in the coatings were demonstrated to play a critical role in mediating cell behavior. The cells present on the outer layer of the distributed IOP-MC (O-IOP-MC) coating with a mass ratio of 0.67 revealed the most distinct osteogenic differentiation activity being promoted, which could be attributed to the maximized mechanical stimuli with exposure to SMF. Furthermore, the enhanced osteogenic differentiation of the stimulated MC3T3-E1 cells originated from magnetically actuated mechanotransduction signaling pathway, embodying the upregulated expression of osteogenic-related and mechanotransduction-related genes. This work therefore provides a promising strategy for implementing mechanical stimuli to activate mechanotransduction on the bone-implant interface and thus to promote osseointegration.

STATEMENT OF SIGNIFICANCE

The magnetically actuated coating is designed to produce mechanical stimuli to cells for promoting osteogenic differentiation based on the coating deformation. Iron oxide nanoparticles (IOPs) were incorporated into the mineralized collagen coatings (MC) forming the composite coatings (IOP-MC) with spatially distributed IOPs, and the IOP-MC coatings with outer distributed IOPs (O-IOPs-MC) shows the maximized mechanical stimuli to cells with enhanced osteogenic differentiation under static magnetic field. The upregulated expression of the associated genes reveals that the enabled mechanotransduction signaling pathway is responsible for the promoted cellular osteogenic differentiation. This work therefore provides a promising strategy for implementing mechanical stimuli to activate mechanotransduction on the bone-implant interface to promote osseointegration.

Electrophoretic deposition: a versatile tool against biomaterial associated infections

Biomaterial-associated infections (BAIs) are today considered as one of the most withering complications of orthopedic implant surgery. Even though BAIs occur relatively infrequently in primary joint replacement surgeries (incidence rates around 1-2%), revision arthroplasties carry up to 40% risk of infection recurrence, with devastating consequences for the patient and significant associated cost. Once the responsible pathogens, mainly bacteria, attach to the surface of the biomaterial, they start creating layers of extracellular matrix with complex architectures, called biofilms. These last mentioned, encapsulate and protect bacteria by hindering the immune response and impeding antibiotics from reaching the pathogens. To prevent such an outcome, the surface of the biomaterials, in particular implants, can be modified in order to play the role of inherent drug delivery devices or as substrates for antibacterial/multifunctional coating deposition. This paper presents an overview of novel electrochemically-triggered deposition strategies, with a focus on electrophoretic deposition (EPD), a versatile and cost-effective technique for organic and inorganic material deposition. Other than being a simple deposition tool, EPD has been recently employed to create novel micro/nanostructured surfaces for multi-purpose antibacterial approaches, presented in detail in this review. In addition, a thorough comparison and assessment of the latest antibacterial and multifunctional compounds deposited by means of EPD have been reported, followed by a critical reflection on current and future prospects of the topic. The relative simplicity of EPD's application, has, by some means, undermined the fundamental requirement of rationality of multifunctional coating design. The demanding practical needs for a successful clinical translation in the growing fields of tissue engineering and antibacterial/multifunctional implant coatings, calls for a more systematic in vitro experimental design rationale, in order to make amends for the scarcity of significant in vivo and clinical studies.

Prevention of Biomaterial Infection by Pre-Operative Incubation with Human Cells

BACKGROUND

Cells of tissues and biofilm forming bacteria compete for the living space on the surface of an implant. We hypothesized the incubation of the implant (titanium, polydimethylsiloxane, and polystyrene surface) with human cells before implantation as a strategy to prevent bacterial adhesion and biofilm formation.

METHODS

After 24 hours of incubation with human osteogenic sarcoma SaOS-2 cells (1 × 10⁵ cells/mL), the materials were incubated for 4.5 hours or two days with Staphylococcus aureus in serial 1:10 dilutions of 10⁸ colony-forming units/mL. The bacterial adherence and biofilm biomass on materials pre-incubated with SaOS-2 cells were compared with our previous results on materials incubated only with bacteria or in simultaneous co-culture of SaOS-2 cells and S. aureus. Fluorescent microscopy and crystal violet stain were used. The number of viable SaOS-2 and bacterial cells present was tested using colorimetric methods (MTT, LDH) and drop plate method, respectively.

RESULTS

The pre-treatment with human cells was associated with a reduction of bacterial colonization of the biomaterial at 4.5 hours and 48 hours compared with the non-pre-treated materials. The presence of bacteria decreased the number of viable human cells on all materials. ( Supplementary Fig. 1 ; see online supplementary materials at www.liebertpub.com/sur ).

CONCLUSIONS

These results suggest that the pre-operative incubation of prostheses with host cells could prevent infection of biomaterials.

In Vitro Studies on the Degradability, Bioactivity, and Cell Differentiation of PRP/AZ31B Mg Alloys Composite Scaffold

In recent years, more and more methods have been developed to improve the bioactivity of the biodegradable materials in bone tissue regeneration. In present study, we used rat mesenchymal stem cells (rMSCs) to evaluate the outcomes of Mg alloys (AZ31B, Magnesium, and Aluminum) and Platelet-rich plasma (PRP)/Mg alloys on rMSCs biocompatibility and osteogenic differentiation. Water absorption experiments indicated that both bare AZ31B and PRP/AZ31B were capable of absorbing large amounts of water. But the water absorption ratio for PRP/AZ31B was significantly higher than that for bare AZ31B. The degradability experiments implied that both samples degraded at same speed. rMSCs on the surface of AZ31B distributed more and better than those on the AZ31B scaffold. In ALP activity experiment, the activity of rMSCs on the PRP/AZ31B was markedly higher than that on the AZ31B scaffolds on the 7th day and 14th day. qRT-PCR also showed that OPN and OCN were expressed in both samples. OPN and OCN expression in PRP/AZ31B sample were higher than those in bare AZ31B samples. In summary, the in vitro study implied that AZ31B combined with PRP could remarkably improve cell seeding, attachment, proliferation, and differentiation.

One-step fabrication of biomimetic superhydrophobic surface by electrodeposition on magnesium alloy and its corrosion inhibition

A facile, rapid and one-step electrodeposition process has been employed to construct a superhydrophobic surface with micro/nano scale structure on a Mg-Sn-Zn (TZ51) alloy, which is expected to be applied as a biodegradable biomedical implant materials. By changing the electrodeposition time, the maximum contact angle of the droplet was observed as high as 160.4°±0.7°. The characteristics of the as-prepared surface were conducted by field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FT-IR). Besides, the anti-corrosion performance of the coatings in stimulated body fluid (SBF) solution were investigated by electrochemical measurement. The results demonstrated that the anti-corrosion property of superhydrophobic surface was greatly improved. This method show beneficial effects on the wettability and corrosion behavior, and therefore provides a efficient route to mitigate the undesirable rapid corrosion of magnesium alloy in favor of application for clinical field.