Influence of dynamic compressive loading on the in vitro degradation behavior of pure PLA and Mg/PLA composite

Structure-function integrated biodegradable Mg/polymer composites: Design, manufacturing, properties, and biomedical applications

Mg is a typical biodegradable metal widely used for biomedical applications due to its considerable mechanical properties and bioactivity. Biodegradable polymers have attracted great interest owing to their favorable processability and inclusiveness. However, it is challenging for the degradation rates of Mg or polymers to precisely match tissue repair processes, and the significant changes in local pH during degradation hinder tissue repair. The concept of combining Mg with polymers is proposed to overcome the shortcomings of materials, aiming to meet repair needs from various aspects such as mechanics and biology. Therefore, it is essential to systematically understand the behavior of biodegradable Mg/polymer composite (BMPC) from the design, manufacturing, mechanical properties, degradation, and biological effects. In this review, we elaborate on the design concepts and manufacturing strategies of high-strength BMPC, the "structure-function" relationship between the microstructures and mechanical properties of composites, the variation in the degradation rate due to endogenous and exogenous factors, and the establishment of advanced degradation research platform. Additionally, the interplay among composite components during degradation and the biological function of composites under non-responsive/stimuli-responsive platforms are also discussed. Finally, we hope that this review will benefit future clinical applications of "structure-function" integrated biomaterials.

A phenomenological model of pulsatile blood pressure-affected degradation of polylactic acid (PLA) vascular stent

The stent implantation may alter the post-operative patient's blood pressure, and bioresorbable vascular stents (BVS) as a candidate to treat vascular diseases, its degradation is affected by mechanical stress, thus, the altered pressure representing varying stress level will result in different degradation behaviors of the BVS. This paper first proposed a novel stress-regulated PLA degradation model that included swelling factor, and then the degradation evolutions of a PLA BVS within 180 days under normal and high blood pressures were simulated by finite element method, and more four degradation indexes were defined to study the effects of the two blood pressures on the degradation of the PLA BVS. The results showed that the high pressure weakly accelerated the degradation of the PLA BVS with respect to the normal pressure by examining the four indexes, e.g., the residual stent volumev r ( t ) decreased to 0.72 and 0.69, respectively for the normal and high pressures at day 180. The current finding provided a theoretical understanding of the PLA BVS degradation, and hinted that the PLA BVS may not need to be elaborately selected in clinical practices for treating hypertensive patients.

Green synthesis of bio-based flame retardant/natural rubber inorganic-organic hybrid and its flame retarding and toughening effect for polylactic acid

Polylactic acid (PLA) has garnered significant interest as a bio-based polymer due to its favorable thermal and processing characteristics, as well as its notable economic and environmental benefits. However, the drawbacks such as flammability and poor toughness of PLA severely constrained its applications in more fields. Here, based on the outstanding flame-retardant properties of core-shell flame retardant (CSFR) and the toughening potential of natural rubber (NR), we synthesized inorganic-organic hybrid of CSFR-NR using an aqueous synthesis to synchronous optimization of the comprehensive performance of PLA. The as-prepared CSFR-NR with "hard core and soft shell" possess the ability to promote char formation and facilitate uniform dispersion in the PLA matrix. Consequently, the PLA/CSFR-NR showed an excellent flame retardancy with the limiting oxygen index (LOI) value of 31.5 % and UL-94 V-0 rating and synergistic toughening effect with absolutely improvement in elongation at break and notched izod impact strength, achieving a balance between the fire safety and mechanical performance. Moreover, the degradation rate of PLA has also been substantially promoted by CSFR-NR in simulated seawater. Hence, this study offers a straightforward, efficient, and environmentally friendly strategy for creating high-performance flame retardant and toughened bioplastics.

Bioabsorbable Composites Based on Polymeric Matrix (PLA and PCL) Reinforced with Magnesium (Mg) for Use in Bone Regeneration Therapy: Physicochemical Properties and Biological Evaluation

Improvements in Tissue Engineering and Regenerative Medicine (TERM)-type technologies have allowed the development of specific materials that, together with a better understanding of bone tissue structure, have provided new pathways to obtain biomaterials for bone tissue regeneration. In this manuscript, bioabsorbable materials are presented as emerging materials in tissue engineering therapies related to bone lesions because of their ability to degrade in physiological environments while the regeneration process is completed. This comprehensive review aims to explore the studies, published since its inception (2010s) to the present, on bioabsorbable composite materials based on PLA and PCL polymeric matrix reinforced with Mg, which is also bioabsorbable and has recognized osteoinductive capacity. The research collected in the literature reveals studies based on different manufacturing and dispersion processes of the reinforcement as well as the physicochemical analysis and corresponding biological evaluation to know the osteoinductive capacity of the proposed PLA/Mg and PCL/Mg composites. In short, this review shows the potential of these composite materials and serves as a guide for those interested in bioabsorbable materials applied in bone tissue engineering.

Finding the Perfect Membrane: Current Knowledge on Barrier Membranes in Regenerative Procedures: A Descriptive Review

Guided tissue regeneration (GTR) and guided bone regeneration (GBR) became common procedures in the corrective phase of periodontal treatment. In order to obtain good quality tissue neo-formation, most techniques require the use of a membrane that will act as a barrier, having as a main purpose the blocking of cell invasion from the gingival epithelium and connective tissue into the newly formed bone structure. Different techniques and materials have been developed, aiming to obtain the perfect barrier membrane. The membranes can be divided according to the biodegradability of the base material into absorbable membranes and non-absorbable membranes. The use of absorbable membranes is extremely widespread due to their advantages, but in clinical situations of significant tissue loss, the use of non-absorbable membranes is often still preferred. This descriptive review presents a synthesis of the types of barrier membranes available and their characteristics, as well as future trends in the development of barrier membranes along with some allergological aspects of membrane use.

Finding the Perfect Membrane: Current Knowledge on Barrier Membranes in Regenerative Procedures: A Descriptive Review

Guided tissue regeneration (GTR) and guided bone regeneration (GBR) became common procedures in the corrective phase of periodontal treatment. In order to obtain good quality tissue neo-formation, most techniques require the use of a membrane that will act as a barrier, having as a main purpose the blocking of cell invasion from the gingival epithelium and connective tissue into the newly formed bone structure. Different techniques and materials have been developed, aiming to obtain the perfect barrier membrane. The membranes can be divided according to the biodegradability of the base material into absorbable membranes and non-absorbable membranes. The use of absorbable membranes is extremely widespread due to their advantages, but in clinical situations of significant tissue loss, the use of non-absorbable membranes is often still preferred. This descriptive review presents a synthesis of the types of barrier membranes available and their characteristics, as well as future trends in the development of barrier membranes along with some allergological aspects of membrane use.

Growth characteristics of human juvenile, adult and murine fibroblasts: a comparison of polymer wound dressings

OBJECTIVE

Fibroblasts are important for the successful healing of deep wounds. However, the influence exerted by Cuticell, a natural polymer on fibroblasts and by the synthetic polymer, Suprathel, made of poly-L-lactic acid, is not sufficiently characterised. This study compared the survival and growth characteristics of human juvenile and adult dermal fibroblasts as well as murine fibroblast cell line L929, on a natural polymer with those of a synthetic polymer using different culture models.

METHOD

Murine, juvenile and adult human fibroblasts were seeded on both the natural and synthetic polymers using statical slide culture or the medium air interface and dynamical rotatory culture. Cell adherence, viability, morphology and actin cytoskeleton architecture were monitored for 1-7 days. Biomaterial permeability was checked with a previously established diffusion chamber.

RESULTS

The majority of the murine and adult human fibroblasts survived in slide and rotatory cultures on both wound dressings. The fibroblasts seeded on the synthetic polymer exhibited phenotypically a typical spread shape with multiple cell adhesion sites earlier than those on the natural polymer. The highest survival rates in all tested fibroblast species over the entire observation time were detected in rotatory culture (mean: >70%). Nevertheless, it led to cell-cluster formation on both materials. In the medium air interface culture, few adult fibroblasts adhered and survived until the seventh day of culture on both the natural and synthetic polymers, and no viable juvenile and L929 fibroblasts could be found by day seven. Apart from a significant higher survival rate of L929 in slide culture on the natural polymer compared with the synthetic polymer at the end of the culturing period (p<0.0001), and a higher cell survival of L929 on the natural polymer in medium air interface culture, only minor differences between both materials were evident. This suggested a comparable cytocompatibility of both materials. Permeability testing revealed slightly higher permeance of the natural polymer compared with the synthetic polymer.

CONCLUSION

Cell survival rates depended on the culture system and the fibroblast source. Nevertheless, the juvenile skin fibroblasts were the most sensitive. This observation suggests that wound dressings used in treating children should be tested beforehand with juvenile fibroblasts to ensure the dressing does not compromise wound healing. Future experiments should also include the response of compromised fibroblasts, for example, from burn patients.

A study on Mg wires/poly-lactic acid composite degradation under dynamic compression and bending load for implant applications

A novel and economic device is developed for simulating the physiological mechanochemical conditions. The degradation behaviors of poly-lactic acid (PLA) based composite reinforced with magnesium alloy wires (Mg wires/PLA) under dynamic compression and bending loads are investigated. The results denote the dynamic loads significantly influence the degradation behaviors of the composite. The dynamic bending load would profoundly promote the degradation of Mg wires in the composite and then accelerate the mechanical properties loss of the composite. The bending strength retention of the composite under consistent dynamic bending load at a magnitude of 5.6 N (about 5.6 MPa for the maximum stress at the middle surface) after 21 days immersion is about 53.3%, comparing to 69.7% for the dynamic compression load at a magnitude of 12 N (0.5 MPa for the compression stress). Furthermore, a numerical model is successfully postulated to elucidate the bending strength evolution of the composite under different dynamic loading conditions.

Characterization of a Bioresorbable Magnesium-Reinforced PLA-Integrated GTR/GBR Membrane as Dental Applications

Inferior mechanical properties have always been a limitation of the bioresorbable membranes in GBR/GTR. This study is aimed at fabricating a bioresorbable magnesium-reinforced polylactic acid- (PLA-) integrated membrane and investigating its mechanical properties, degradation rate, and biocompatibility. The uncoated and fluoride-coated magnesium alloys, AZ91, were made into strips. Then, magnesium-reinforced PLA-integrated membrane was made through integration. PLA strips were used in the control group instead of magnesium strips. Specimens were cut into rectangular shape and immersed in Hank's Balanced Salt Solution (HBSS) at 37°C for 4, 8, and 12 d. The weight loss of the AZ91 strips was measured. Three-point bending tests were conducted before and after the immersion to determine the maximum load on specimens. Potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS) were conducted on coated and uncoated AZ91 plates to examine corrosion resistance. Murine fibroblast and osteoblast cells were cultured on circular specimens and titanium disks for 1, 3, and 5 d. Thereafter, WST test was performed to examine cell proliferation. As a result, the coated and uncoated groups showed higher maximum loads than the control group at all time points. The weight loss of AZ91 strips used in the coated group was lower than that in the uncoated group. PDP, EIS, SEM, and EDS showed that the coated AZ91 had a better corrosion resistance than the uncoated AZ91. The cell proliferation test showed that the addition of AZ91 did not have an adverse effect on osteoblast cells. Conclusively, the magnesium-reinforced PLA-integrated membrane has excellent load capacity, corrosion resistance, cell affinity, and proper degradation rate. Moreover, it has great potential as a bioresorbable membrane in the GBR/GTR application.

Development of a Novel Loading Device for Studying Magnesium Degradation under Compressive Load for Implant Applications

Medical implants play a key role in treating bone fractures. Permanent implants are currently used for immobilization of fractures and bearing physiological loads during bone healing. After bone has healed, these implants, if not removed, often cause complications in the long run; and secondary surgeries for removing them pose additional discomfort and expenses for patients. Magnesium (Mg)-based bioresorbable implants, can potentially eliminate the need for additional surgeries by degrading safely over time in the human body. When studying the degradation behaviors of Mg-based implants in vitro, it is important to simulate physiological conditions in vivo closely, including loading. Considering that implants often carry physiological loads in vivo and mechanical stresses affect the degradation rate of Mg, a novel loading device was designed and manufactured for studying Mg degradation under load over a long period of time in a simulated body fluid in vitro. Degradation of Mg rods were investigated by immersing in a revised simulated body fluid (rSBF) for two weeks while a consistent compressive load was applied using the loading device. The results showed that the loading device provided a consistent load of 500 ± 45 N during the two weeks of immersion. Mg rods showed a significant faster degradation rate under the applied load, as demonstrated by a higher mass loss of the sample, a higher pH increase and Mg²⁺ ion release in the rSBF.