Injectable drug depot engineered to release multiple ophthalmic therapeutic agents with precise time profiles for postoperative treatment following ocular surgery

Diverse Strategies to Develop Poly(ethylene glycol)-Polyester Thermogels for Modulating the Release of Antibodies

In this work, we present basic research on developing thermogel carriers containing high amounts of model antibody immunoglobulin G (IgG) with potential use as injectable molecules. The quantities of IgG loaded into the gel were varied to evaluate the possibility of tuning the dose release. The gel materials were based on blends of thermoresponsive and degradable ABA-type block copolymers composed of poly(lactide-co-glycolide)-b-poly(ethylene glycol)-b-poly(lactide-co-glycolide) (PLGA-PEG-PLGA) or poly(lactide-co-caprolactone)-b-poly(ethylene glycol)-b-(lactide-co-caprolactone) (PLCL-PEG-PLCL). Primarily, the gels with various amounts of IgG were obtained via thermogelation, where the only factor inducing gel formation was the change in temperature. Next, to control the gels' mechanical properties, degradation rate, and the extent of antibody release, we have tested two approaches. The first one involved the synergistic physical and chemical crosslinking of the copolymers. To achieve this, the hydroxyl groups located at the ends of the PLGA-PEG-PLGA chain were modified into acrylate groups. In this case, the thermogelation was accompanied by chemical crosslinking through the Michael addition reaction. Such an approach increased the dynamic mechanical properties of the gels and simultaneously prolonged their decomposition time. An alternative solution was to suspend crosslinked PEG-polyester nanoparticles loaded with IgG in a PLGA-PEG-PLGA gelling copolymer. We observed that loading IgG into thermogels lowered the gelation temperature (TGEL) value and increased the storage modulus of the gels, as compared with gels without IgG. The prepared gel materials were able to release the IgG from 8 up to 80 days, depending on the gel formulation and on the amount of loaded IgG. The results revealed that additional, chemical crosslinking of the thermogels and also suspension of particles in the polymer matrix substantially extended the duration of IgG release. With proper matching of the gel composition, environmental conditions, and the type and amount of active substances, antibody-containing thermogels can serve as effective IgG delivery materials.

The cytokine Meteorin-like inhibits anti-tumor CD8+ T cell responses by disrupting mitochondrial function

Tumor-infiltrating lymphocyte (TIL) hypofunction contributes to the progression of advanced cancers and is a frequent target of immunotherapy. Emerging evidence indicates that metabolic insufficiency drives T cell hypofunction during tonic stimulation, but the signals that initiate metabolic reprogramming in this context are largely unknown. Here, we found that Meteorin-like (METRNL), a metabolically active cytokine secreted by immune cells in the tumor microenvironment (TME), induced bioenergetic failure of CD8+ T cells. METRNL was secreted by CD8+ T cells during repeated stimulation and acted via both autocrine and paracrine signaling. Mechanistically, METRNL increased E2F-peroxisome proliferator-activated receptor delta (PPARδ) activity, causing mitochondrial depolarization and decreased oxidative phosphorylation, which triggered a compensatory bioenergetic shift to glycolysis. Metrnl ablation or downregulation improved the metabolic fitness of CD8+ T cells and enhanced tumor control in several tumor models, demonstrating the translational potential of targeting the METRNL-E2F-PPARδ pathway to support bioenergetic fitness of CD8+ TILs.

Self-assembled sodium alginate polymannuronate nanoparticles for synergistic treatment of ophthalmic infection and inflammation: Preparation optimization and in vitro/vivo evaluation

Frequent administrations are often needed during the treatment of ocular diseases due to the low bioavailability of the existing eye drops owing to inadequate corneal penetration and rapid drug washout. Herein, sodium alginate polymannuronate (SA) nanocarriers were developed using ionic gelation method that can provide better bioavailability through mucoadhesivity and sustained drug release by binding to the ocular mucus layer. This study disproves the common belief that only the G block of SA participates in the crosslinking reaction during ionic gelation. Self-assembly capability due to the linear flexible structure of the M block, better biocompatibility than G block along with the feasibility of controlling physicochemical characteristics postulate a high potential for designing efficient ocular drug delivery systems. Initially, four crosslinkers of varied concentrations were investigated. Taguchi design of experiment revealed the statistically significant effect of the crosslinker type and concentration on the particle size and stability. The best combination was detected by analyzing the particle size and zeta potential values that showed the desired microstructural properties for ocular barrier penetration. The desired combination was SA-Ca-1 that had particle size within the optimal corneal penetration range, that is 10-200 nm (135 nm). The drug carriers demonstrated excellent entrapment efficiency (∼89 % for Ciprofloxacin and ∼96 % for Dexamethasone) along with a sustained and simultaneous release of dual drug for at least 2 days. The nanoparticles also showed biocompatibility (4 ± 0.6 % hemolysis) and high mucoadhesivity (73 ± 2 % for 0.25 g) which was validated by molecular docking analysis. The prepared formulation was able to reduce the scleral inflammation of the rabbit uveitis models significantly within 3 days. Thus, the eye drop showed remarkable potential for efficient drug delivery leading to faster recovery.

Alternatives to Topical Glaucoma Medication for Glaucoma Management

Topical glaucoma medications have favorable safety and efficacy, but their use is limited by factors such as side effects, nonadherence, costs, ocular surface disease, intraocular pressure fluctuations, diminished quality of life, and the inherent difficulty of penetrating the corneal surface. Although traditionally these limitations have been accepted as an inevitable part of glaucoma treatment, a rapidly-evolving arena of minimally invasive surgical and laser interventions has initiated the beginnings of a reevaluation of the glaucoma treatment paradigm. This reevaluation encompasses an overall shift away from the reactive, topical-medication-first default and a shift toward earlier intervention with laser or surgical therapies such as selective laser trabeculoplasty, sustained-release drug delivery, and micro-invasive glaucoma surgery. Aside from favorable safety, these interventions may have clinically important attributes such as consistent IOP control, cost-effectiveness, independence from patient adherence, prevention of disease progression, and improved quality of life.

An insight on ophthalmic drug delivery systems: Focus on polymeric biomaterials-based carriers

Presently, different types of eye diseases, such as glaucoma, myopia, infection, and dry eyes are treated with topical eye drops. However, due to ocular surface barriers, eye drops require multiple administrations, which may cause several risks, thereby necessitating additional strategies. Some of the key characteristics of an ideal ocular drug delivery system are as follows: (a) good penetration into cornea, (b) high drug retention in the ocular tissues, (c) targetability to the desired regions of the eye, and (d) good bioavailability. It is worthy to note that the corneal epithelial tight junctions hinder the permeation of therapeutics through the cornea. Therefore, it is necessary to design nanocarriers that can overcome these barriers and enhance drug penetration into the inner parts of the eye. Moreover, intelligent multifunctional nanocarriers can be designed to include cavities, which may help encapsulate sufficient amount of the drug. In addition, nanocarriers can be modified with the targeting moieties. Different types of nanocarriers have been developed for ocular drug delivery applications, including emulsions, liposomes, micelles, and nanoparticles. However, these formulations may be rapidly cleared from the eye. The therapeutic use of the nanoparticles (NPs) is also hindered by the non-specific adsorption of proteins on NPs, which may limit their interaction with the cellular moieties or other targeted biological factors. Functional drug delivery systems (DDS), which can offer targeted ocular drug delivery while avoiding the non-specific protein adsorption could exhibit great potential. This could be further realized by the on-demand DDS, which can respond to the stimuli in a spatio-temporal fashion. The cell-mediated DDS offer another valuable platform for ophthalmological drug delivery.

Polymeric nanoparticle gel for intracellular mRNA delivery and immunological reprogramming of tumors

Immuno-oncology therapies have been of great interest with the goal of inducing sustained tumor regression, but clinical results have demonstrated the need for improved and widely applicable methods. An antigen-free method of cancer immunotherapy can stimulate the immune system to recruit lymphocytes and produce immunostimulatory factors without prior knowledge of neoantigens, while local delivery reduces the risk of systemic toxicity. To improve the interactions between tumor cells and cytotoxic lymphocytes, a gene delivery nanoparticle platform was engineered to reprogram the tumor microenvironment (TME) in situ to be more immunostimulatory by inducing tumor-associated antigen-presenting cells (tAPCs) to activate cytotoxic lymphocytes against the tumor. Biodegradable, lipophilic poly (beta-amino ester) (PBAE) nanoparticles were synthesized and used to co-deliver mRNA constructs encoding a signal 2 co-stimulatory molecule (4-1BBL) and a signal 3 immuno-stimulatory cytokine (IL-12), along with a nucleic acid-based immunomodulatory adjuvant. Nanoparticles are combined with a thermoresponsive block copolymer for gelation at the injection site for local NP retention at the tumor. The reprogramming nanoparticle gel synergizes with immune checkpoint blockade (ICB) to induce tumor regression and clearance in addition to resistance to tumor rechallenge at a distant site. In vitro and in vivo studies reveal increases in immunostimulatory cytokine production and recruitment of immune cells as a result of the nanoparticles. Intratumoral injection of nanoparticles encapsulating mRNA encoding immunostimulatory agents and adjuvants via an injectable thermoresponsive gel has great translational potential as an immuno-oncology therapy that can be accessible to a wide range of patients.

Improving ocular bioavailability of hydrophilic drugs through dynamic covalent complexation

The clinical benefits of diquafosol tetrasodium (DQS), a hydrophilic P2Y2 receptor agonist for dry eye, have been hindered by a demanding dosing regimen. Nevertheless, it is challenging to achieve sustained release of DQS with conventional drug delivery vehicles which are mainly designed for hydrophobic small molecule drugs. To address this, we developed an affinity hydrogel for DQS by taking advantage of borate-mediated dynamic covalent complexation between DQS and hydroxypropyl guar. The resultant formulation (3% DQS Gel) was characterized by sustained release, low corneal permeation, and extended ocular retention, which were desirable attributes for ocular surface drug delivery. Both in vitro and in vivo studies had been carried out to verify the biocompatibility of 3% DQS Gel. Using corneal fluorescein staining, the Schirmer's test, PAS staining, quantitative PCR and immunohistological analyses as outcome measures, the superior therapeutic effects of 3% DQS Gel over PBS, the hydrogel vehicle and free DQS were demonstrated in a mouse dry eye model. Our DQS delivery strategy reported herein is readily applicable to other hydrophilic small molecule drugs with cis-diol moieties, thus providing a general solution to improve clinical outcomes of numerous diseases.

Controlled Delivery of Corticosteroids Using Tunable Tough Adhesives

Hydrogel-based drug delivery systems typically aim to release drugs locally to tissue in an extended manner. Tissue adhesive alginate-polyacrylamide tough hydrogels are recently demonstrated to serve as an extended-release system for the corticosteroid triamcinolone acetonide. Here, the stimuli-responsive controlled release of triamcinolone acetonide from the alginate-polyacrylamide tough hydrogel drug delivery systems (TADDS) and evolving new approaches to combine alginate-polyacrylamide tough hydrogel with drug-loaded nano and microparticles, generating composite TADDS is described. Stimulation with ultrasound pulses or temperature changes is demonstrated to control the release of triamcinolone acetonide from the TADDS. The incorporation of laponite nanoparticles or PLGA microparticles into the tough hydrogel is shown to further enhance the versatility to control and modulate the release of triamcinolone acetonide. A first technical exploration of a TADDS shelf-life concept is performed using lyophilization, where lyophilized TADDS are physically stable and the bioactive integrity of released triamcinolone acetonide is demonstrated. Given the tunability of properties, the TADDS are a suggested technology platform for controlled drug delivery.

Therapeutic application of 3B-PEG injectable hydrogel/Nell-1 composite system to temporomandibular joint osteoarthritis

This study aims to construct a composite system of the tri-block polyethylene glycol injectable hydrogel (3B-PEG IH) and neural epithelial growth factor-like protein 1 (Nell-1), and to analyze its therapeutic effect on temporomandibular joint osteoarthritis (TMJOA). Sol-gel transition temperature was measured via inverting test. The viscoelastic modulus curves was measured by rheometer. Degradation and controlled release profiles of 3B-PEG IH were drawnin vitro.In vivogel retention and biocompatibility were completed subcutaneously on the back of rats. After primary chondrocytes were extracted and identified, the cell viability in 3B-PEG IH was measured. Evaluation of gene expression in hydrogel was performed by real-time polymerase chain reaction. TMJOA rabbits were established by intra-articular injection of type II collagenase. Six weeks after composite systems being injected, gross morphological score, micro-CT, histological staining and grading were evaluated. The rusults showed that different types of 3B-PEG IH all reached a stable gel state at 37 °C and could support the three-dimensional growth of chondrocytes, but poly(lactide-co-caprolactone)-block-poly(ethyleneglycol)-block-poly(lactide-co-caprolactone) (PLCL-PEG-PLCL) hydrogel had a wider gelation temperature range and better hydrolytic stability for about 4 weeks. Its controlled release curve is closest to the zero-order release kinetics.In vitro, PLCL-PEG-PLCL/Nell-1 could promote the chondrogenic expression and reduce the inflammatory expression.In vivo, TMJOA rabbits were mainly characterized by the disorder of cartilage structure and the destruction of subchondral bone. However, PLCL-PEG-PLCL/Nell-1 could reverse the destruction of the subchondral trabecula, restore the fibrous and proliferative layers of the surface, and reduce the irregular hyperplasia of fibrocartilage layer. In conclusion, by comparing the properties of different 3B-PEG IH, 20 wt% PLCL-PEG-PLCL hydrogel was selected as the most appropriate material. PLCL-PEG-PLCL/Nell-1 composite could reverse osteochondral damage caused by TMJOA, Nfatc1-Runx3 signaling pathway may play a role in it. This study may provide a novel, minimally-invasive therapeutic strategy for the clinical treatment of TMJOA.

Injectable Composite Systems Based on Microparticles in Hydrogels for Bioactive Cargo Controlled Delivery

Engineering drug delivery systems (DDS) aim to release bioactive cargo to a specific site within the human body safely and efficiently. Hydrogels have been used as delivery matrices in different studies due to their biocompatibility, biodegradability, and versatility in biomedical purposes. Microparticles have also been used as drug delivery systems for similar reasons. The combination of microparticles and hydrogels in a composite system has been the topic of many research works. These composite systems can be injected in loco as DDS. The hydrogel will serve as a barrier to protect the particles and retard the release of any bioactive cargo within the particles. Additionally, these systems allow different release profiles, where different loads can be released sequentially, thus allowing a synergistic treatment. The reported advantages from several studies of these systems can be of great use in biomedicine for the development of more effective DDS. This review will focus on in situ injectable microparticles in hydrogel composite DDS for biomedical purposes, where a compilation of different studies will be analysed and reported herein.

Lollipop-Inspired Multilayered Drug Delivery Hydrogel for Dual Effective, Long-Term, and NIR-Defined Glaucoma Treatment

Glaucoma is an ophthalmic disease that is characterized by elevated intraocular pressure (IOP). Eye drops are the preferred choice to reduce IOP for the treatment of glaucoma. However, the bioavailability of eye drops is low (<5%). Their long-term frequent administration cannot ensure patient compliance, which is the main reason for treatment failure. Inspired by lollipop, herein, a multilayered sodium alginate-chitosan (SA-CS) hydrogel ball (HB) decorated by zinc oxide-modified biochar (ZnO-BC) is developed as a new drug delivery system. The multilayer structure encapsulate timolol maleate (TM) and levofloxacin inside the different layers to realize the sustained release of drugs, which can control ocular hypertension and prevent infection effectively. The results show that the release of TM can be sustained in vitro for longer than 2 weeks. Moreover, IOP is also effectively reduced in vivo. Meanwhile, the photothermal conversion activity of ZnO-BC can regulate drug release on demand after stimulation by near-infrared irradiation. More importantly, the designed HB also shows good biocompatibility and antibacterial properties in vitro and in vivo. In summary, ZnO-BC-SA-CS HB can effectively reduce IOP and is expected to replace the classical tedious eye drop strategy, having potential utilization value in the treatment of glaucoma.

Nanomedicines for the treatment of glaucoma: Current status and future perspectives

Glaucoma is the global leading cause of irreversible blindness. It is a chronic progressive disorder and, therefore, often requires long-term management with drugs on patients' discretion. However, there is a shortage of antiglaucoma drugs in the current market due to their low bioavailability. This is because there are multiple biological barriers of the human eyes, thereby leading to increased demands for frequent dosage regimen per day of these drugs, which could result in concomitant side effects and eventually reduced patient compliance. Recently, nanomedicines have become optimized alternatives to conventional ophthalmic formulations due to advantages of improved barrier permeability, sustained drug release, tissue targeting, and lowered systemic absorption of instilled medications. These merits provide the active ingredients in these nanomedicines an effective manner to reach the ideal concentrations at sites of damaged nerves, offering a promising platform for neuroprotective treatment of these conditions. In this study, nanomedicines and nanomedicine-based novel strategies for pharmacotherapy of glaucoma were reviewed, including liposomes, niosomes, nanoparticles, and dendrimers. This article intends to offer a comprehensive review of frontier progresses as well as hotspots and issues that appeared in the field of nanomedicines, which may enable a practical flourish in the future. STATEMENT OF SIGNIFICANCE: Recent novel pharmaceutical strategies toward glaucoma, a chronic blinding ocular disease that currently requires frequent daily dosage regimen, based on nanomedicines and nanomaterials have been comprehensively reviewed in this manuscript. The collection of field hotspots and issues in the late years should offer a quick grasp of the general concept and up-to-date threads upon the refinement of existing treatment patterns for glaucoma. Meanwhile, the Conclusion and Future Perspective section given at the end of the text brings out the possible shortages and opinions in terms of ideal research direction, which hopefully could facilitate a future practical flourish in the area.

Structural characterization and developability assessment of sustained release hydrogels for rapid implementation during preclinical studies

Sustained-release formulations are important tools to convert efficacious molecules into therapeutic products. Hydrogels enable the rapid assessment of sustained-release strategies, which are important during preclinical development where drug quantities are limited and fast turnaround times are the norm. Most research in hydrogel-based drug delivery has focused around synthesizing new materials and polymers, with limited focus on structural characterization, technology developability and implementation. Two commercially available thermosensitive hydrogel systems, comprised of block copolymers of poly(lactic-co-glycolic acid)-b-poly(ethylene glycol)-b-poly(lactic-co-glycolic acid) (PLGA) and poly(lactide-co-caprolactone)-b-poly(ethyleneglycol)-b-poly(lactide-co-caprolactone) (PLCL), were evaluated during this study. The two block copolymers described in the study were successfully formulated to form hydrogels which delayed the release of lysozyme (> 20 days) in vitro. Characterization of formulation attributes of the hydrogels like T_sol-gel temperature, complex viscosity and injection force showed that these systems are amenable to rapid implementation in preclinical studies. Understanding the structure of the gel network is critical to determine the factors controlling the release of therapeutics out of these gels. The structures were characterized via the gel mesh sizes, which were estimated using two orthogonal techniques: small angle X-ray scattering (SAXS) and rheology. The mesh sizes of these hydrogels were larger than the hydrodynamic radius (size) of lysozyme (drug), indicating that release through these gels is expected to be diffusive at all time scales rather than sub-diffusive. In vitro drug release experiments confirm that diffusion is the dominating mechanism for lysozyme release; with no contribution from degradation, erosion, relaxation, swelling of the polymer network or drug-polymer interactions. PLGA hydrogel was found to have a much higher complex viscosity than PLCL hydrogel, which correlates with the slower diffusivity and release of lysozyme seen from the PLGA hydrogel as compared to PLCL hydrogel. This is due to the increased frictional drag experienced by the lysozyme molecule in the PLGA hydrogel network, as described by the hydrodynamic theory.

Thermoresponsive GenisteinNLC-dexamethasone-moxifloxacin multi drug delivery system in lens capsule bag to prevent complications after cataract surgery

Cataract surgery is the most common intraocular procedure. To decrease postsurgical inflammation, prevent infection and reduce the incidence of secondary cataract, we built a temperature-sensitive drug delivery system carrying dexamethasone, moxifloxacin and genistein nanostructured lipid carrier (GenNLC) modified by mPEG-PLA based on F127/F68 as hydrogel. Characterizations and release profiles of the drug delivery system were studied. In vitro functions were detected by CCK-8 test, immunofluorescence, wound-healing assay, real time-PCR and western blotting. The size of GenNLCs was 39.47 ± 0.69 nm in average with surface charges of - 4.32 ± 0.84 mV. The hydrogel gelation temperature and time were 32 °C, 20 s with a viscosity, hardness, adhesiveness and stringiness of 6.135 Pa.s, 54.0 g, 22.0 g, and 3.24 mm, respectively. Transmittance of the gel-release medium was above 90% (93.44 ± 0.33% to 100%) at range of 430 nm to 800 nm. Moxifloxacin released completely within 10 days. Fifty percent of dexamethasone released at a constant rate in the first week, and then released sustainably with a tapering down rate until day 30. Genistein released slowly but persistently with a cumulative release of 63% at day 40. The thermoresponsive hydrogel inhibited the proliferation, migration and epithelial-mesenchymal transition of SRA 01/04 cells, which were confirmed by testing CCK-8, wound-healing assay, western blot, real time-PCR (RT-PCR) and immunofluorescence. These results support this intracameral thermoresponsive in situ multi-drug delivery system with programmed release amounts and release profiles to cut down the need of eye drops for preventing inflammation or infection and to reduce posterior capsular opacification following cataract surgery.

Structures and Applications of Thermoresponsive Hydrogels and Nanocomposite-Hydrogels Based on Copolymers with Poly (Ethylene Glycol) and Poly (Lactide-Co-Glycolide) Blocks

Thermoresponsive hydrogels showing biocompatibility and degradability have been under intense investigation for biomedical applications, especially hydrogels composed of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(lactic acid-co-glycolic acid) (PLGA) as first-line materials. Even though various aspects such as gelation behavior, degradation behavior, drug-release behavior, and composition effect have been studied for 20 years since the first report of these hydrogels, there are still many outputs on parameters affecting their gelation, structure, and application. In this review, the current trends of research on linear block copolymers composed of PEG and PLGA during the last 5 years (2014-2019) are summarized. In detail, this review stresses newly found parameters affecting thermoresponsive gelation, findings from structural analysis by simulation, small-angle neutron scattering (SANS), etc., progress in biomedical applications including drug delivery systems and regeneration medicine, and nanocomposites composed of block copolymers with PEG and PLGA and nanomaterials (laponite).

Thermoresponsive dendronized chitosan-based hydrogels as injectable stem cell carriers

A combination of dendronization and Schiff-base chemistry endows injectable chitosan hydrogels with thermoresponsiveness, self-healing abilities and enhanced mechanical properties under physiological conditions.