Responsive antimicrobial dental adhesive based on drug-silica co-assembled particles

Dental resin for periodontal and tooth root regeneration via metformin to enhance osteogenic and cementogenic differentiation of human periodontal ligament stem cells

OBJECTIVES

This study developed a novel dental resin incorporating metformin to repair root caries and periodontitis defects. The objectives were to: (1) Develop a novel dental resin with metformin release to fulfill the clinical requirements for mechanical properties; and (2) investigate the metformin release pattern and the effects on osteogenic and cementogenic differentiation of human periodontal ligament stem cells (hPDLSCs).

METHODS

Resin specimens with different concentrations of metformin were fabricated. Metformin release was measured using high-performance liquid chromatography. Cellular growth and proliferation on resin were assessed. Alizarin red S staining and an alkaline phosphatase (ALP) activity were determined. Quantitative real-time reverse transcription PCR was employed to determine osteogenic and cementogenic differentiation.

RESULTS

The resin with 7.5 % metformin had mechanical properties comparable to those of a commercial control, thus satisfying the clinical requirements (mean ± SD; n = 10). hPDLSCs showed robust growth and proliferation on resin. At 14 days, the number of hPDLSCs increased by four-fold (p > 0.1). ALP activity in the metformin group was 1.8 times higher than that of control (p < 0.05). At 21 days, the metformin group showed a significant increase in mineral synthesis. Metformin group had cementogenic and osteogenic differentiation values that were 2.5 and 2.3 times higher, respectively, than control without metformin (p < 0.05).

SIGNIFICANCE

A metformin-resin was formulated that greatly promoted both cementogenic and osteogenic differentiation for the first time. This resin was mechanically strong and supported hPDLSC adhesion, growth and proliferation. This resin substantially enhanced hPDLSC osteogenic and cementogenic differentiation, yielding mineral synthesis of hPDLSCs more than 2-fold that of control without metformin. This new metformin-resin shows promise for the restoration of tooth root caries and the regeneration of periodontal tissues including alveolar bone and cementum.

Current approaches to produce durable biomaterials: Trends in polymeric materials for restorative dentistry applications

Dental caries continues to be a public health issue, especially more evident in underserved populations throughout the U.S. Unfortunately, especially with an aging population, hundreds of thousands of resin composite restorations are replaced each year due to recurring decay and fracture. According to several cohort studies, the average life span of this type of restoration is 10 years or less, depending on the caries risk level of the patient and the complexity of the restorative procedure. Any new material development must depart from the simple restoration of form paradigm, in which the filling is simply inert/biocompatible. This review will discuss novel antibiofilm structures, based on a targeted approach specifically against dysbiotic bacteria. Biofilm coalescence can be prevented by using glycosyl transferase - GTF inhibitors, in a non-bactericidal approach. On the tooth substrate side, MMP-inhibiting molecules can improve the stability of the collagen in the hybrid layer. This review will also discuss the importance of testing the materials in a physiologically relevant environment, mimicking the conditions in the mouth in terms of mechanical loading, bacterial challenge, and the presence of saliva. Ultimately, the goal of materials development is to achieve durable restorations, capable of adapting to the oral environment and resisting challenges that go beyond mechanical demands. That way, we can prevent the unnecessary loss of additional tooth structure that comes with every re-treatment. CLINICAL SIGNIFICANCE: While proper restorative technique and patient education in terms of diet and oral hygiene are crucial factors in increasing the longevity of esthetic direct restorations, materials better able to resist and interact with the conditions of the oral environment are still needed. Reproducing the success of dental amalgams with esthetic materials continues to be the Holy Grail of materials development.

Physicochemical and biological properties of dental materials and formulations with silica nanoparticles: A narrative review

OBJECTIVE

Silica nanoparticles (SNPs) have been extensively studied and used in different dental applications to promote improved physicochemical properties, high substance loading efficiency, in addition to sustained delivery of substances for therapeutic or preventive purposes. Therefore, this study aimed to review the SNPs applications in nanomaterials and nanoformulations in dentistry, discussing their effect on physicochemical properties, biocompatibility and ability to nanocarry bioactive substances.

DATA RESOURCES

Literature searches were conducted on PubMed, Web of Science, and Scopus databases to identify studies examining the physicochemical and biological properties of dental materials and formulations containing SNPs. Data extraction was performed by one reviewer and verified by another STUDY SELECTION: A total of 50 were reviewed. In vitro studies reveal that SNPs improved the general properties of dental materials and formulations, such as microhardness, fracture toughness, flexural strength, elastic modulus and surface roughness, in addition to acting as efficient nanocarriers of substances, such as antimicrobial, osteogenic and remineralizing substances, and showed biocompatibility CONCLUSIONS: SNPs are biocompatible, improve properties of dental materials and serve as effective carriers for bioactive substances CLINICAL SIGNIFICANCE: Overall, SNPs are a promising drug delivery system that can improve dental materials biological and physicochemical and aesthetic properties, increasing their longevity and clinical performance. However, more studies are needed to elucidate SNPs short- and long-term effects in the oral cavity, mainly on in vivo and clinical studies, to prove their effectiveness and safety.

Nanotechnology in tissue engineering: expanding possibilities with nanoparticles

Tissue engineering is a multidisciplinary field that merges engineering, material science, and medical biology in order to develop biological alternatives for repairing, replacing, maintaining, or boosting the functionality of tissues and organs. The ultimate goal of tissue engineering is to create biological alternatives for repairing, replacing, maintaining, or enhancing the functionality of tissues and organs. However, the current landscape of tissue engineering techniques presents several challenges, including a lack of suitable biomaterials, inadequate cell proliferation, limited methodologies for replicating desired physiological structures, and the unstable and insufficient production of growth factors, which are essential for facilitating cell communication and the appropriate cellular responses. Despite these challenges, there has been significant progress made in tissue engineering techniques in recent years. Nanoparticles hold a major role within the realm of nanotechnology due to their unique qualities that change with size. These particles, which provide potential solutions to the issues that are met in tissue engineering, have helped propel nanotechnology to its current state of prominence. Despite substantial breakthroughs in the utilization of nanoparticles over the past two decades, the full range of their potential in addressing the difficulties within tissue engineering remains largely untapped. This is due to the fact that these advancements have occurred in relatively isolated pockets. In the realm of tissue engineering, the purpose of this research is to conduct an in-depth investigation of the several ways in which various types of nanoparticles might be put to use. In addition to this, it sheds light on the challenges that need to be conquered in order to unlock the maximum potential of nanotechnology in this area.

The mechanical, wear, antibacterial properties and biocompatibility of injectable restorative materials under wet challenge

OBJECTIVES

To evaluate the mechanical, wear, antibacterial properties, and biocompatibility of injectable composite materials.

METHODS

Two injectable composite resins (GU and BI), one flowable composite resin (FS), and one flowable compomer (DF), in A2 shade, were tested. Mechanical properties were tested via three-point bending test immediately after preparation and after 1-day, 7-day, 14-day, and 30-day water storage. Under water-PMMA slurry immersion, specimens were subjected to a 3-body wear test (10,000 cycles) against stainless steel balls, while the roughness, wear depth, and volume loss were recorded. After 1-day and 3-day MC3T3-E1 cell culture, cell viability was evaluated with CCK-8 test kits, while the cell morphology was observed under CLSM and SEM. Antibacterial properties on S. mutans were assessed via CFU counting, CLSM, and SEM observation. SPSS 26.0 was used for statistical analysis (α = 0.05).

RESULTS

The mechanical properties were material-dependent and sensitive to water storage. Flexural strength ranked GU > FS > BI > DF at all testing levels. Three nanocomposites had better wear properties than DF. No significant difference on 1-day cell viability was found, but DF showed significantly lower cell proliferation than nanocomposites on 3-day assessment. GU and FS had more favourable cell adhesion and morphology. CFU counting revealed no significant difference, while FS presented a slightly thicker biofilm and BI showed relatively lower bacteria density.

CONCLUSIONS

Injectable nanocomposites outperformed the compomer regarding mechanical properties, wear resistance, and biocompatibility. The tested materials presented comparable antibacterial behaviours. Flowable resin-based composites' performances are affected by multiple factors, and their compositions can be attributed.

CLINICAL SIGNIFICANCE

A profound understanding of the mechanical, wear, and biological properties of the restorative material is imperative for the clinical success of dental restorations. The current study demonstrated superior properties of highly filled injectable composite resins, which imply their wider indications and better long-term clinical performances.

Formulation of arginine-loaded mesoporous silica nanoparticles (Arg@MSNs) modified orthodontic adhesive

OBJECTIVES

The objective of this study was to synthesize arginine loaded mesoporous silica nanoparticles (Arg@MSNs), develop a novel orthodontic adhesive using Arg@MSNs as modifiers, and investigate the adhesive performance, antibacterial activity, and biocompatibility.

METHODS

Arg@MSNs were synthesized by immobilizing arginine into MSNs and characterized using transmission electron microscope (TEM), dynamic light scattering (DLS), and Fourier Transform Infrared Spectrometer (FT-IR). Arg@MSNs were incorporated into Transbond XT adhesive with different mass fraction to form functional adhesives. The degree of conversion (DC), arginine release behavior, adhesive performance, antibacterial activity against Streptococcus mutans biofilm, and cytotoxicity were comprehensively evaluated.

RESULTS

TEM, DLS, and FT-IR characterizations confirmed the successful preparation of Arg@MSNs. The incorporation of Arg@MSNs did not significantly affect DC and exhibited clinically acceptable bonding strength. Compared to the commercial control, the Arg@MSNs modified adhesives greatly suppressed the metabolic activity and polysaccharide production while increased the biofilm pH values. The cell counting kit (CCK)-8 test indicated no cytotoxicity.

CONCLUSIONS

The novel orthodontic adhesive containing Arg@MSNs exhibited significantly enhanced antibacterial activities and inhibitory effects on acid production compared to the commercial adhesive without compromising their bonding strength or biocompatibility.

CLINICAL SIGNIFICANCE

The novel orthodontic adhesive containing Arg@MSNs exhibits potential clinical benefits in preventing demineralization of enamel surfaces around or beneath orthodontic brackets due to its enhanced antibacterial activities and acid-producing inhibitory effects.

Association between failed eradication of 7-day triple therapy for Helicobacter pylori and untreated dental caries in Japanese adults

Helicobacter pylori (H. pylori) infection is a cause of gastric disorders and is treated mainly by pharmacotherapy with antimicrobial agents. An association has been reported between dental caries and H. pylori infection. As antimicrobial agents are less effective inside dental caries because of impaired blood circulation, the presence of untreated dental caries (decayed teeth) may influence the success of H. pylori eradication treatment. In this cross-sectional study, we examined whether failed eradication of H. pylori was associated with decayed teeth in Japanese adults. Enrolled were 226 participants who received dental checkups among those treated for eradication of H. pylori at Asahi University Hospital between April 2019 and March 2021. Treatment efficacy was assessed by urea breath test. Eradication failed in 38 participants (17%), decayed teeth in 32 participants (14%), and number of 0.34 teeth per participants. Multivariate logistic regression analyses showed that failed eradication of H. pylori was associated with decayed teeth (presence: odds ratio, 2.672; 95% confidence interval, 1.093-6.531) after adjusting for gender, age, and brushing frequency. These results indicate that failed eradication of H. pylori was associated with decayed teeth and suggest that untreated dental caries may impact treatment for eradication of H. pylori.

Application of omics technologies in cariology research: A critical review with bibliometric analysis

OBJECTIVES

To review the application of omics technologies in the field of cariology research and provide critical insights into the emerging opportunities and challenges.

DATA & SOURCES

Publications on the application of omics technologies in cariology research up to December 2022 were sourced from online databases, including PubMed, Web of Science and Scopus. Two independent reviewers assessed the relevance of the publications to the objective of this review.

STUDY SELECTION

Studies that employed omics technologies to investigate dental caries were selected from the initial pool of identified publications. A total of 922 publications with one or more omics technologies adopted were included for comprehensive bibliographic analysis. (Meta)genomics (676/922, 73 %) is the predominant omics technology applied for cariology research in the included studies. Other applied omics technologies are metabolomics (108/922, 12 %), proteomics (105/922, 11 %), and transcriptomics (76/922, 8 %).

CONCLUSION

This study identified an emerging trend in the application of multiple omics technologies in cariology research. Omics technologies possess significant potential in developing strategies for the detection, staging evaluation, risk assessment, prevention, and management of dental caries. Despite the numerous challenges that lie ahead, the integration of multi-omics data obtained from individual biological samples, in conjunction with artificial intelligence technology, may offer potential avenues for further exploration in caries research.

CLINICAL SIGNIFICANCE

This review presented a comprehensive overview of the application of omics technologies in cariology research and discussed the advantages and challenges of using these methods to detect, assess, predict, prevent, and treat dental caries. It contributes to steering research for improved understanding of dental caries and advancing clinical translation of cariology research outcomes.

Innovations in the Design and Application of Stimuli-Responsive Restorative Dental Polymers

The field of dental materials is undergoing rapid advancements in the pursuit of an innovative generation of dental polymeric restorative materials. There is a growing interest in the development of a distinct category of dental polymers that transcend the conventional role of inertly filling prepared cavities. Instead, these materials possess the capacity to actively detect and respond to alterations within the host environment by undergoing dynamic and controlled molecular changes. Despite the well-established status of stimuli-responsive polymeric systems in other fields, their implementation in dentistry is still in its nascent stages, presenting a multitude of promising opportunities for advancement. These systems revolve around the fundamental concept of harnessing distinctive stimuli inherent in the oral environment to trigger precise, targeted, predictable, and demand-driven responses through molecular modifications within the polymeric network. This review aims to provide a comprehensive overview of the diverse categories of stimuli-responsive polymers, accentuating the critical aspects that must be considered during their design and development phases. Furthermore, it evaluates their current application in the dental field while exploring potential alternatives for future advancements.

Smart Dental Materials Intelligently Responding to Oral pH to Combat Caries: A Literature Review

Smart dental materials are designed to intelligently respond to physiological changes and local environmental stimuli to protect the teeth and promote oral health. Dental plaque, or biofilms, can substantially reduce the local pH, causing demineralization that can then progress to tooth caries. Progress has been made recently in developing smart dental materials that possess antibacterial and remineralizing capabilities in response to local oral pH in order to suppress caries, promote mineralization, and protect tooth structures. This article reviews cutting-edge research on smart dental materials, their novel microstructural and chemical designs, physical and biological properties, antibiofilm and remineralizing capabilities, and mechanisms of being smart to respond to pH. In addition, this article discusses exciting and new developments, methods to further improve the smart materials, and potential clinical applications.

Smart dental materials for antimicrobial applications

Smart biomaterials can sense and react to physiological or external environmental stimuli (e.g., mechanical, chemical, electrical, or magnetic signals). The last decades have seen exponential growth in the use and development of smart dental biomaterials for antimicrobial applications in dentistry. These biomaterial systems offer improved efficacy and controllable bio-functionalities to prevent infections and extend the longevity of dental devices. This review article presents the current state-of-the-art of design, evaluation, advantages, and limitations of bioactive and stimuli-responsive and autonomous dental materials for antimicrobial applications. First, the importance and classification of smart biomaterials are discussed. Second, the categories of bioresponsive antibacterial dental materials are systematically itemized based on different stimuli, including pH, enzymes, light, magnetic field, and vibrations. For each category, their antimicrobial mechanism, applications, and examples are discussed. Finally, we examined the limitations and obstacles required to develop clinically relevant applications of these appealing technologies.

One-Pot Preparation of Cetylpyridinium Chloride-Containing Nanoparticles for Biofilm Eradication

Quaternary ammonium compounds (QACs) have been widely used due to their excellent antimicrobial activity. However, using the technology where nanomaterials are employed as drug carriers to deliver QAC drugs has not been fully explored. In this study, mesoporous silica nanoparticles (MSNs) with short rod morphology were synthesized in a one-pot reaction using an antiseptic drug cetylpyridinium chloride (CPC). CPC-MSN were characterized via various methods and tested against three bacterial species (Streptococcus mutans, Actinomyces naeslundii, and Enterococcus faecalis), which are associated with oral infections, caries, and endodontic pathology. The nanoparticle delivery system used in this study prolonged the release of CPC. The manufactured CPC-MSN effectively killed the tested bacteria within the biofilm, and their size allowed them to penetrate into dentinal tubules. This CPC-MSN nanoparticle delivery system demonstrates potential for applications in dental materials.

Application of Nanomaterials in Restorative Dentistry

Dental composite resins are widely popular restoratives, as, when using these tools to restore the tooth, only the infected and affected carious structures are removed. This allows the patient to retain a greater quantity of their natural tooth structure than they would have using conventional principles of cavity preparation. Nanomaterials are a new concept concerning the manipulation of materials on an atomic or molecular level. However, on a nanoscale, the chemical, biological, and physical properties of an atom vary compared to the properties of its naturally occurring compound form. The main idea of shifting focus to the inclusion of nanomaterials is to aid in the detection, treatment, and prevention of the recurrence of a pathology (secondary caries). The primary aim of using nanomaterials in composites is to augment their strength, wear resistance, and microhardness. This usage also reduces polymerization shrinkage. Nanomaterials are capable of enhancing mechanical properties, life, and bond strength between dentin and restoration. This review aims to highlight different research studies and experiments that have been conducted on the use of nanomaterials in restorative dentistry in order to understand the versatility of these materials and their viability in practice.

L-arginine-containing mesoporous silica nanoparticles embedded in dental adhesive (Arg@MSN@DAdh) for targeting cariogenic bacteria

Dental caries is the major biofilm-mediated oral disease in the world. The main treatment to restore caries lesions consists of the use of adhesive resin composites due to their good properties. However, the progressive degradation of the adhesive in the medium term makes possible the proliferation of cariogenic bacteria allowing secondary caries to emerge. In this study, a dental adhesive incorporating a drug delivery system based on L-arginine-containing mesoporous silica nanoparticles (MSNs) was used to release this essential amino acid as a source of basicity to neutralize the harmful acidic conditions that mediate the development of dental secondary caries. The in vitro and bacterial culture experiments proved that L-arginine was released in a sustained way from MSNs and diffused out from the dental adhesive, effectively contributing to the reduction of the bacterial strains Streptococcus mutans and Lactobacillus casei. Furthermore, the mechanical and bonding properties of the dental adhesive did not change significantly after the incorporation of L-arginine-containing MSNs. These results are yielding glimmers of promise for the cost-effective prevention of secondary caries.

Rapid synthesis of drug-encapsulated films by evaporation-induced self-assembly for highly-controlled drug release from biomaterial surfaces

Infection at the surgical site for dental implants results in failed procedures, patient pain, burdensome economic impact, and the over-prescription of prophylactic antibiotics. Mesoporous silica films as coatings for implants may provide an ideal antimicrobial drug storage and local release vector to the site of infection, however traditional drug loading techniques result in insufficient drug load and short-term release kinetics. In this work, we have applied a method to use a surfactant-antimicrobial drug octenidine dihydrochloride (OCT) as a template for mesostructured silica, to demonstrate silica-OCT composite films. The films are synthesized by evaporation induced self-assembly (EISA) and we explore the effects of synthesis parameters on porous film structure, OCT incorporation, and OCT drug release rates. Drug micelle incorporation into the silica mesostructure was highly dependent on silica precursor pre-reaction to form silica oligomers before film spin-casting. The OCT drug concentration of the synthesis solution dictated the time required for effective incorporation (without phase separation), with total loading in the film of up to 90% by mass. The OCT content in the films was found to directly determine the timescale of drug release, from 2 to 8 h for a single layer film. The total release timescale was increased by the addition of multiple layers of OCT-silica films to nearly 2 weeks. Drug release from films completely inhibited Streptococcus mutans (UA159) growth, while drug-free porous silica films showed no increase in bacterial growth over non-porous control. These OCT-silica films have a significant potential to store and release antimicrobial drugs from dental implant surfaces.

Simulating the Intraoral Aging of Dental Bonding Agents: A Narrative Review

Despite their popularity, resin composite restorations fail earlier and at higher rates than comparable amalgam restorations. One of the reasons for these rates of failure are the properties of current dental bonding agents. Modern bonding agents are vulnerable to gradual chemical and mechanical degradation from a number of avenues such as daily use in chewing, catalytic hydrolysis facilitated by salivary or bacterial enzymes, and thermal fluctuations. These stressors have been found to work synergistically, all contributing to the deterioration and eventual failure of the hybrid layer. Due to the expense and difficulty in conducting in vivo experiments, in vitro protocols meant to accurately simulate the oral environment’s stressors are important in the development of bonding agents and materials that are more resistant to these processes of degradation. This narrative review serves to summarize the currently employed methods of aging dental materials and critically appraise them in the context of our knowledge of the oral environment’s parameters.

Antimicrobial agents in dental restorative materials: Effect on long-term drug release and material properties

The present study reports on the long-term drug release and mechanical properties of bioactive dental filling materials based on chlorhexidine diacetate (CHX) or octinidine (di)hydrochloride (ODH) incorporated in a composite based on dimethacrylates or an ormocer. CHX or ODH were added to a nano-hybrid ormocer (O) and a nano-hybrid composite (C) with the amount of 2 wt% to achieve four matrix-drug combinations: O-CHX, O-ODH, C-CHX, and C-ODH. Drug extraction and release were measured using high-performance liquid chromatography with diode-array detection (HPLC-DAD), while drug distribution was assessed by using energy dispersive X-ray spectroscopy (EDX). Drug release in water at 37°C was observed over 87 d. To determine the material properties, the water absorption, water solubility, flexural strength and hardness were measured and compared to the reference materials. Persistent drug release over 87 d was observed for both ODH-based systems and both ormocer-systems, with the longest duration of activity seen for the O-ODH combination. Persistent drug release was achieved via the loosening of the polymer network indicated via decreasing polymerization enthalpies, enhanced water absorption, and water solubility. As a consequence, the flexural strengths of the materials were reduced. However, surface hardness was hardly reduced. ODH seems to be more adequate than CHX for the design of bioactive dental filling materials based on nano-hybrid ormocer and composites.

The Combination of Solid-State Chemistry and Medicinal Chemistry as the Basis for the Synthesis of Theranostics Platforms

This review presents the main patterns of synthesis for theranostics platforms. We examine various approaches to the interpretation of theranostics, statistics of publications drawn from the PubMed database, and the solid-state and medicinal chemistry methods used for the formation of nanotheranostic objects. We highlight and analyze chemical methods for the modification of nanoparticles, synthesis of spacers with functional end-groups, and the immobilization of medicinal substances and fluorophores. An overview of the modern solutions applied in various fields of medicine is provided, along with an outline of specific examples and an analysis of modern trends and development areas of theranostics as a part of personalized medicine.

Synergistic Effect of Bioactive Inorganic Fillers in Enhancing Properties of Dentin Adhesives-A Review

Dentin adhesives (DAs) play a critical role in the clinical success of dental resin composite (DRC) restorations. A strong bond between the adhesive and dentin improves the longevity of the restoration, but it is strongly dependent on the various properties of DAs. The current review was aimed at summarizing the information present in the literature regarding the improvement of the properties of DAs noticed after the addition of bioactive inorganic fillers. From our search, we were able to find evidence of multiple bioactive inorganic fillers (bioactive glass, hydroxyapatite, amorphous calcium phosphate, graphene oxide, calcium chloride, zinc chloride, silica, and niobium pentoxide) in the literature that have been used to improve the different properties of DAs. These improvements can be seen in the form of improved hardness, higher modulus of elasticity, enhanced bond, flexural, and ultimate tensile strength, improved fracture toughness, reduced nanoleakage, remineralization of the adhesive-dentin interface, improved resin tag formation, greater radiopacity, antibacterial effect, and improved DC (observed for some fillers). Most of the studies dealing with the subject area are in vitro. Future in situ and in vivo studies are recommended to positively attest to the results of laboratory findings.

Dentin Bond Integrity of Filled and Unfilled Resin Adhesive Enhanced with Silica Nanoparticles-An SEM, EDX, Micro-Raman, FTIR and Micro-Tensile Bond Strength Study

The objective of this study was to synthesize and assess unfilled and filled (silica nanoparticles) dentin adhesive polymer. Methods encompassing scanning electron microscopy (SEM)-namely, energy dispersive X-ray spectroscopy (EDX), micro-tensile bond strength (µTBS) test, Fourier transform infrared (FTIR), and micro-Raman spectroscopy-were utilized to investigate Si particles' shape and incorporation, dentin bond toughness, degree of conversion (DC), and adhesive-dentin interaction. The Si particles were incorporated in the experimental adhesive (EA) at 0, 5, 10, and 15 wt. % to yield Si-EA-0% (negative control group), Si-EA-5%, Si-EA-10%, and Si-EA-15% groups, respectively. Teeth were set to form bonded samples using adhesives in four groups for µTBS testing, with and without aging. Si particles were spherical shaped and resin tags having standard penetrations were detected on SEM micrographs. The EDX analysis confirmed the occurrence of Si in the adhesive groups (maximum in the Si-EA-15% group). Micro-Raman spectroscopy revealed the presence of characteristic peaks at 638, 802, and 1300 cm^-1 for the Si particles. The µTBS test revealed the highest mean values for Si-EA-15% followed by Si-EA-10%. The greatest DC was appreciated for the control group trailed by the Si-EA-5% group. The addition of Si particles of 15 and 10 wt. % in dentin adhesive showed improved bond strength. The addition of 15 wt. % resulted in a bond strength that was superior to all other groups. The Si-EA-15% group demonstrated acceptable DC, suitable dentin interaction, and resin tag formation.

Drug-Silica Coassembled Particles Improve Antimicrobial Properties of Endodontic Sealers

INTRODUCTION

The purpose of this study was to assess the antimicrobial activity and flow of root canal sealers after incorporating novel highly loaded antimicrobial drug-silica coassembled particles (DSPs).

METHODS

DSPs were synthesized through coassembly of silica and octenidine dihydrochloride (OCT) antimicrobial surfactant. DSPs were loaded (1% and 2% wt) into epoxy resin sealer (AH Plus [AH]; Dentsply DeTrey GmbH, Konstanz, Germany) or calcium silicate-based sealer (EndoSequence Bioceramic Sealer (BC); Brasseler, Savannah, GA). OCT release from DSP-modified sealers was determined using liquid chromatography. Antimicrobial activity of sealers against planktonic or biofilm form Enterococcus faecalis was assessed using direct contact and membrane restricted tests. Sealer flow was tested according to ISO6876:2012.

RESULTS

OCT release from BC + 1% or 2% DSPs was above the minimum inhibitory concentration following 2 days throughout the 30-day experiment, whereas OCT release from AH + 1% or 2% DSP was significantly below the minimum inhibitory concentration against E. faecalis (4 μg/mL) over the whole 30-day experimental period. All materials (with or without DSPs) killed planktonic bacteria initially. AH ± 1% or 2% DSPs had no antimicrobial activity after 7 days. BC + 1% or 2% DSPs maintained antibacterial activity over the 30-day period. Both modified and unmodified sealers completely inhibited the growth of E. faecalis biofilms after 24 hours of contact. DSPs decreased the flow of AH and BC sealers; for AH, the reduction was proportional to the amount of DSPs added. All modified and unmodified sealers, except for AH + 2% DSPs, were within the acceptable limits of ISO 6876 flow tests.

CONCLUSIONS

DSPs enhanced the antimicrobial performance of BC but not AH, whereas the material's flow remained compliant with ISO 6876 standards. Depending on the sealer, DSPs may enhance antimicrobial efficacy in root canal treatment and potentially improve treatment outcome.

New Smart Antimicrobial Hydrogels, Nanomaterials, and Coatings: Earlier Action, More Specific, Better Dosing?

To fight against antibiotic-resistant bacteria adhering and developing on medical devices, which is a growing problem worldwide, researchers are currently developing new "smart" materials and coatings. They consist in delivery of antimicrobial agents in an intelligent way, i.e., only when bacteria are present. This requires the use of new and sophisticated tools combining antimicrobial agents with lipids or polymers, synthetic and/or natural. In this review, three classes of innovative materials are described: hydrogels, nanomaterials, and thin films. Moreover, smart antibacterial materials can be classified into two groups depending on the origin of the stimulus used: those that respond to a nonbiological stimulus (light, temperature, electric and magnetic fields) and those that respond to a biological stimulus related to the presence of bacteria, such as changes in pH or bacterial enzyme secretion. The bacteria presence can induce a pH change that constitutes a first potential biological trigger allowing the system to become active. A second biological trigger signal consists in enzymes produced by bacteria themselves. A complete panel of recent studies will be given focusing on the design of such innovative smart materials that are sensitive to biological triggers.

Bibliometric Analysis of Literature Published on Antibacterial Dental Adhesive from 1996-2020

This study aimed to investigate the current state of research on antibacterial dental adhesives. The interest in this field can be drawn from an increasing number of scholarly works in this area. However, there is still a lack of quantitative measurement of this topic. The main aim of this study was to consolidate the research published on the antibacterial adhesive from 1996 to 2020 in Web of Science indexed journals. The bibliometric method, a quantitative study of investigating publishing trends and patterns, was used for this study. The result has shown that a gradual increase in research was found, whereby a substantial increase was observed from 2013. A total of 248 documents were published in 84 journals with total citations of 5107. The highly cited articles were published mainly in Q1 category journals. Most of the published articles were from the USA, China, and other developed countries; however, some developing countries contributed as well. The authorship pattern showed an interdisciplinary and collaborative approach among researchers. The thematic evaluation of keywords along with a three-factor analysis showed that 'antibacterial adhesives' and 'quaternary ammonium' have been used commonly. This bibliometric analysis can provide direction not only to researchers but also to funding organizations and policymakers.

Antimicrobial antidegradative dental adhesive preserves restoration-tooth bond

OBJECTIVE

Assess the ability of an antimicrobial drug-releasing resin adhesive, containing octenidine dihydrochloride (OCT)-silica co-assembled particles (DSPs), to enhance the biostability and preserve the interfacial fracture toughness (FT) of composite restorations bonded to dentin. Enzyme-catalyzed degradation compromises the dental restoration-tooth interface, increasing cariogenic bacterial infiltration. In addition to bacterial ingress inhibition, antimicrobial-releasing adhesives may exhibit direct interfacial biodegradation inhibition as an additional benefit.

METHODS

Mini short-rod restoration bonding specimens with total-etch adhesive with/without 10% wt. DSPs were made. Interfacial fracture toughness (FT) was measured as-manufactured or post-incubation in simulated human salivary esterase (SHSE) for up to 6-months. Effect of OCT on SHSE and whole saliva/bacterial enzyme activity was assessed. Release of OCT outside the restoration interface was assessed.

RESULTS

No deleterious effect of DSPs on initial bonding capacity was observed. Aging specimens in SHSE reduced FT of control but not DSP-adhesive-bonded specimens. OCT inhibited SHSE degradation of adhesive monomer and may inhibit endogenous proteases. OCT inhibited bacterial esterase and collagenase. No endogenous collagen breakdown was detected in the present study. OCT increased human saliva degradative esterase activity below its minimum inhibitory concentration towards S. mutans (MIC), but inhibited degradation above MIC. OCT release outside restoration margins was below detection.

SIGNIFICANCE

DSP-adhesive preserves the restoration bond through a secondary enzyme-inhibitory effect of released OCT, which is virtually confined to the restoration interface microgap. Enzyme activity modulation may produce a positive-to-negative feedback switch, by increasing OCT concentration via biodegradation-triggered release to an effective dose, then subsequently slowing degradation and degradation-triggered release.

Human neutrophils compromise the restoration-tooth interface

Neutrophils, cells of the innate immune system, enter the mouth and release factors that are hypothesized to contribute to the degradation of tooth dentin, methacrylate resin composites, and adhesives at the restoration-tooth-dentin interface. The objectives were to characterize neutrophils' degradation towards resin composite, self-etch (SE) and total-etch (TE) adhesives, SE and TE resin-dentin interfaces and to identify proteins that could contribute to the degradation process. Neutrophils' degradation of cured resin composite, and SE and TE adhesives, was quantified by measuring the specific resin degradation by-product, bishydroxy-propoxy-phenyl-propane (bisHPPP), released after 30 days incubation of the materials with the cells. Neutrophils' degradative effect on resin-dentin interfaces was examined by recording the interfacial fracture toughness (FT), and surface analysis of the fracture mode following incubation of SE and TE miniature short-rod (mini-SR) specimens with the cells. Neutrophils increased degradation of polymerized resin composite, and TE adhesive, but not SE adhesive over 30 days (p < 0.05). Incubation of SE and TE resin-dentin interfaces with neutrophils led to a reduction in FT over time (p < 0.05). The effect was more pronounced for TE interfaces. Neutrophils also affected the fracture mode of SE and TE resin-dentin interfaces. Several proteins that could contribute to the degradative activity of neutrophils, including Neutrophil collagenase (MMP-8), Matrix metalloproteinase- 9 (MMP-9), Cathepsin G, Neutrophil- gelatinase associated lipocalin (NGAL) and Myeloperoxidase, were isolated. The ability of neutrophils to degrade resin, tooth dentin, and reduce the bond strength of resin-dentin interfaces suggest neutrophils' potential role in primary and recurrent caries and dental restoration failure.

Advances of Anti-Caries Nanomaterials

Caries is the most common and extensive oral chronic disease. Due to the lack of anti-caries properties, traditional caries filling materials can easily cause secondary caries and lead to treatment failure. Nanomaterials can interfere with the bacteria metabolism, inhibit the formation of biofilm, reduce demineralization, and promote remineralization, which is expected to be an effective strategy for caries management. The nanotechnology in anti-caries materials, especially nano-adhesive and nano-composite resin, has developed fast in recent years. In this review, the antibacterial nanomaterials, remineralization nanomaterials, and nano-drug delivery systems are reviewed. We are aimed to provide a theoretical basis for the future development of anti-caries nanomaterials.

Peptide-assisted pre-bonding remineralization of dentin to improve bonding

Bonding with dentin is a complex process involving physical and chemical adhesion where the adhesive must be able to penetrate and envelop collagen fibers. Acid etching clears the dentin of debris, which prevents adhesives to interact with dentin. However, it also demineralizes the outermost surface of dentin and exposes collagen fibers. The mineral-free collagen is susceptible to collapse after drying and to proteolytic or microbial attack, ultimately impairing the bonding with dentin. To address this, we have attempted a pre-bonding rapid remineralization approach to recover the mineral content of etched dentin. We have used a mineralization-promoting peptide and high calcium/phosphate concentration to achieve this in a clinically applicable timeframe. Partial remineralization was confirmed via SEM and XRD analyses. The mechanical properties and the stability of the partially remineralized dentin were investigated via microhardness, collagen hydrolysis and shrinkage tests. The bonding properties were investigated via shear bond strength (SBS) and microleakage tests. Pre-bonding remineralization of dentin with peptide for 10 min significantly increased the stiffness, resistance to hydrolysis and reduced shrinkage due to drying. SBS was increased with both an etch&rinse and a self-etch adhesive. However, pre-bonding remineralization resulted in reduced microleakage only with the etch&rinse adhesive. The described method is readily applicable to clinic since it is expected to add only 10 min to the procedure. Future in situ and/or in vivo studies will help to confirm the benefits observed in this in vitro study and allow optimize the parameters of the method.

Applications of nano-materials in diverse dentistry regimes

Research and development in the applied sciences at the atomic or molecular level is the order of the day under the domain of nanotechnology or nano-science with enormous influence on nearly all areas of human health and activities comprising diverse medical fields such as pharmacological studies, clinical diagnoses, and supplementary immune system. The field of nano-dentistry has emerged due to the assorted dental applications of nano-technology. This review provides a brief introduction to the general nanotechnology field and a comprehensive overview of the synthesis features and dental uses of nano-materials including current innovations and future expectations with general comments on the latest advancements in the mechanisms and the most significant toxicological dimensions.

Polymeric and inorganic nanoscopical antimicrobial fillers in dentistry

Failure of dental treatments is mainly due to the biofilm accumulated on the dental materials. Many investigations have been conducted on the advancements of antimicrobial dental materials. Polymeric and inorganic nanoscopical agents are capable of inhibiting microorganism proliferation. Applying them as fillers in dental materials can achieve enhanced microbicidal ability. The present review provides a broad overview on the state-of-the-art research in the field of antimicrobial fillers which have been adopted for incorporation into dental materials over the last 5 years. The antibacterial agents and applications are described, with the aim of providing information for future investigations. STATEMENT OF SIGNIFICANCE: Microbial infection is the primary cause of dental treatment failure. The present review provides an overview on the state-of-art in the field of antimicrobial nanoscopical or polymeric fillers that have been applied in dental materials. Trends in the biotechnological development of these antimicrobial fillers over the last 5 years are reviewed to provide a backdrop for further advancement in this field of research.

Drug-templated mesoporous silica nanocontainers with extra high payload and controlled release rate

The possibility of one-step creating of pH-sensitive mesostructured silica-based nanocontainers with exceptionally high payload using associates of two antiseptics (including hydrolyzable one) as templates is demonstrated. The effects of the template nature and the conditions of the sol-gel process on the porous structure of silica nanocontainers are studied and discussed. The kinetics of the templating drug release from such containers is studied and some features of this process are analyzed. It is shown that the drug release rate can be tuned by varying the medium pH. The bactericidal activity of two encapsulated antiseptics against the Staphylococcus aureus is evaluated in vitro by agar diffusion method with replacement of agar with agarose. The diameters of the inhibition zones for silica-based containers loaded with antiseptics increased with the pre-diffusion time at 4 °C. At the same time, empty containers (after elimination of antiseptics by etching) did not reveal any bactericidal properties.

Esterases affect the physical properties of materials used to seal the endodontic space

Materials used to seal the endodontic space are subjected to enzymatic degradative activities of body fluids and bacteria.

OBJECTIVES

To assess effects of simulated human salivary, blood and bacterial esterases (SHSE) on physical properties of typical restorative material and root canal sealers.

METHODS

Specimens of set methacrylate-based resin composite (BisfilTM2B; RC), calcium-silicate sealer (EndoSequence®; BC) or epoxy-resin sealer (AH-Plus®; ER) were tested after up to 28Days exposure to phosphate buffered saline (PBS) or SHSE, using ANSI/ADA-57:2000 and ISO-6876:2012.

RESULTS

Regardless of media, microhardness increased with time for BC remained unchanged for ER and decreased for RC (p < 0.05). SHSE moderated the increase for BC compared to PBS (28.0 ± 4.8 vs. 38.1 ± 7.9 KHN) at 7Days, and enhanced the decrease for RC at 7Days (55.6 ± 7.1 vs. 66.3 ± 6.5 KHN) and 28Days (52.3 ± 9.2 vs. 62.6 ± 8.5 KHN). Compressive strength was enhanced only for BC by either media. BC expanded with time for both incubation conditions; SHSE moderated the expansion compared to PBS at 7Days (0.026 ± 0.01% vs. 0.049 ± 0.007%). Shrinkage of ER was similar for both incubation media and was lower than that for RC (p < 0.05). Shrinkage of RC was enhanced by SHSE compared to PBS at 7Days (0.5 ± 0.07% vs. 0.38 ± 0.08%). Weight loss was lowest for ER and highest for BC (p < 0.05). It was enhanced by SHSE compared to PBS for BC at 28Days (2.40 ± 0.2 vs. 2.96 ± 0.19 W L%), and for RC at 7Days (0.54 ± 0.09 vs. 0.80 ± 0.1 W L%).

SIGNIFICANCE

Simulated body fluids and bacterial esterases affected the physical properties of test materials, suggesting potential impacts on sealing ability and resistance to bacterial ingress, and tooth strength ultimately affecting their clinical performance.

Human neutrophils degrade methacrylate resin composites and tooth dentin

Cholesterol esterase-like (CE) activity from saliva and esterase from cariogenic bacteria hydrolyze ester linkages of dental methacrylate resins. Collagenolytic, matrix metalloproteinase-like (MMP) activities from dentin and bacteria degrade collagen in demineralized tooth dentin. Human neutrophils in the oral cavity contain factors that are hypothesized to have CE and MMP activities that could contribute to the degradation of methacrylate resins and dentinal collagen. OBJECTIVES: To measure the CE and MMP activities from human neutrophils and their ability to degrade dental methacrylate resin composite and dentinal collagen. Neutrophils' CE and MMP activities were measured using nitrophenyl-esters or fluorimetric MMP substrates, respectively. Neutrophils' degradation of resin composite and dentinal collagen was quantified by measuring release of a universal 2,2-Bis[4-(2-hydroxy-3-methacryloxypropoxy)phenyl]propane (bisGMA)-derived resin composite degradation byproduct, bishydroxy-propoxy-phenyl-propane (bisHPPP), or a collagen degradation by-product, hydroxyproline, respectively using ultra performance liquid chromatography/mass spectrometry. Neutrophils' CE activity increased the release of bisHPPP from bisGMA monomer compared to control after 24 and 48 h (p < 0.05). Neutrophils degraded polymerized resin composite and produced higher amounts of bisHPPP than buffer after 48 h of incubation (p < 0.05). Neutrophils show generic MMP, gelatinase, MMP-2 and MMP-9, and collagenase, MMP-1 and MMP-8 activities that were stable or increased over the first 24 h (p < 0.05). Neutrophils degraded demineralized dentin more than buffer-only groups, indicated by higher amounts of hydroxyproline (p < 0.05). The ability of neutrophils to degrade both dental resin composite and tooth dentin, suggest neutrophil's potential role in root caries, and in recurrent carries by accelerating the degradation of resin-dentin interfaces, and compromising the longevity of the restoration. STATEMENT OF SIGNIFICANCE: Neutrophils are part of the innate immune system and are constantly entering the oral cavity through the gingival sulcus, in direct contact with the tooth, restoration, restoration-tooth margins and pathogenic bacteria. The current study is the first to characterize and quantify degradative activities from neutrophils toward methacrylate resin and demineralized dentin, the two main components of the restoration-tooth interface, suggesting that this interface could be negatively influenced by neutrophils, potentially contributing to increase in caries formation and progression, and premature restoration failure. This study provides a significant finding to the biomaterials and oral health fields by identifying a potential weakness in current restorative procedures and materials used to manage gingival proximal and cervical gingival or sub-gingival carious lesions.

Biostable, antidegradative and antimicrobial restorative systems based on host-biomaterials and microbial interactions

OBJECTIVES

Despite decades of development and their status as the restorative material of choice for dentists, resin composite restoratives and adhesives exhibit a number of shortcomings that limit their long-term survival in the oral cavity. Herein we review past and current work to understand these challenges and approaches to improve dental materials and extend restoration service life.

METHODS

Peer-reviewed work from a number of researchers as well as our own are summarized and analyzed. We also include yet-unpublished work of our own. Challenges to dental materials, methods to assess new materials, and recent material improvements and research directions are presented.

RESULTS

Mechanical stress, host- and bacterial-biodegradation, and secondary caries formation all contribute to restoration failure. In particular, several host- and bacterial-derived enzymes degrade the resin and collagen components of the hybrid layer, expanding the marginal gap and increasing access to bacteria and saliva. Furthermore, the virulence of cariogenic bacteria is up-regulated by resin biodegradation by-products, creating a positive feedback loop that increases biodegradation. These factors work synergistically to degrade the restoration margin, leading to secondary caries and restoration failure. Significant progress has been made to produce hydrolytically stable resins to resist biodegradation, as well as antimicrobial materials to reduce bacterial load around the restoration. Ideally, these two approaches should be combined in a holistic approach to restoration preservation.

SIGNIFICANCE

The oral cavity is a complex environment that poses an array of challenges to long-term material success; materials testing conditions should be comprehensive and closely mimic pathogenic oral conditions.