Colistin nanoparticle assembly by coacervate complexation with polyanionic peptides for treating drug-resistant gram-negative bacteria

Antibiotic-Polyphosphate Nanocomplexes: A Promising System for Effective Biofilm Eradication

Purpose

The eradication of bacterial biofilms poses an enormous challenge owing to the inherently low antibiotic susceptibility of the resident microbiota. The complexation of antibiotics with polyphosphate can substantially improve antimicrobial performance.

Methods

Nanoparticular complexes of the model drug colistin and polyphosphate (CP-NPs) were developed and characterized in terms of their particle size and morphology, polydispersity index (PDI), zeta potential, and cytotoxicity. Enzyme-triggered monophosphate and colistin release from the CP-NPs was evaluated in the presence of alkaline phosphatase (AP). Subsequently, antimicrobial efficacy was assessed by inhibition experiments on planktonic cultures, as well as time-kill assays on biofilms formed by the model organism Micrococcus luteus.

Results

The CP-NPs exhibited a spherical morphology with particle sizes <200 nm, PDI <0.25, and negative zeta potential. They showed reduced cytotoxicity toward two human cell lines and significantly decreased hemotoxicity compared with native colistin. Release experiments with AP verified the enzymatic cleavage of polyphosphate and subsequent release of monophosphate and colistin from CP-NPs. Although CP-NPs were ineffective against planktonic M. luteus cultures, they showed major activity against bacterial biofilms, outperforming native colistin treatment. Strongly elevated AP levels in the biofilm state were identified as a potential key factor for the observed findings.

Conclusion

Accordingly, polyphosphate-based nanocomplexes represent a promising tool to tackle bacterial biofilm.

Novel functions of o-cymen-5-ol nanoemulsion in reversing colistin resistance in multidrug-resistant Klebsiella pneumoniae infections

Multidrug resistance (MDR) Klebsiella pneumoniae (K. pneumoniae) is a major emerging threat to human health, and leads to very high mortality rate. The effectiveness of colistin, the last resort against MDR Gram-negative bacteria, is significantly compromised due to the widespread presence of plasmid- or chromosome-mediated resistance genes. In this study, o-cymen-5-ol has been found to greatly restore colistin sensitivity in MDR K. pneumoniae. Importantly, this compound does not impact bacterial viability, induce resistance, or cause any noticeable cell toxicity. Various routes disclosed the potential mechanism of o-cymen-5-ol potentiating colistin activity against MDR K. pneumoniae. These include inhibiting the activity of plasmid-mediated mobile colistin resistance gene (mcr-1), accelerating lipopolysaccharide (LPS) - mediated membrane damage, and promoting the ATP-binding cassette (ABC) transporter pathway. To enhance the administration and bioavailability of o-cymen-5-ol, a nanoemulsion has been designed, which significantly improves the loading efficiency and solubility of o-cymen-5-ol, resulting in antimicrobial potentiation of colistin against K. pneumoniae infection. This study has revealed a new understanding of the o-cymen-5-ol nanoemulsion as a means to enhance the effectiveness of colistin against resistant factors. The finding also suggests that o-cymen-5-ol nanoemulsion could be a promising approach in the development of potential treatments for multidrug-resistant Gram-negative bacterial infections.

Pulmonary delivery systems for antimicrobial peptides

Bacterial infections of the respiratory tract cause millions of deaths annually. Several diseases exist wherein (1) bacterial infection is the main cause of disease (e.g., tuberculosis and bacterial pneumonia), (2) bacterial infection is a consequence of disease and worsens the disease prognosis (e.g., cystic fibrosis), and (3) bacteria-triggered inflammation propagates the disease (e.g., chronic obstructive pulmonary disease). Current approaches to combat infections generally include long and aggressive antibiotic treatments, which challenge patient compliance, thereby making relapses common and contributing to the development of antibiotic resistance. Consequently, the proportion of infections that cannot be treated with conventional antibiotics is rapidly increasing, and novel therapies are urgently needed. In this context, antimicrobial peptides (AMPs) have received considerable attention as they may exhibit potent antimicrobial effects against antibiotic-resistant bacterial strains but with modest toxicity. In addition, some AMPs suppress inflammation and provide other host defense functions (motivating the alternative term host defense peptides (HDPs)). However, the delivery of AMPs is complicated because they are large, positively charged, and amphiphilic. As a result of this, AMP delivery systems have recently attracted attention. For airway infections, the currently investigated delivery approaches range from aerosols and dry powders to various self-assembly and nanoparticle carrier systems, as well as their combinations. In this paper, we discuss recent developments in the field, ranging from mechanistic mode-of-action studies to the application of these systems for combating bacterial infections in the airways.

Poly(2-Deoxy-2-Methacrylamido-D-Glucose)-Based Complex Conjugates of Colistin, Deferoxamine and Vitamin B12: Synthesis and Biological Evaluation

Growing resistance to traditional antibiotics poses a global threat to public health. In this regard, modification of known antibiotics, but with limited applications due to side effects, is one of the extremely promising approaches at present. In this study, we proposed the synthesis of novel complex polymeric conjugates of the peptide antibiotic colistin (CT). A biocompatible and water-soluble synthetic glycopolymer, namely, poly(2-deoxy-2-methacrylamido-D-glucose) (PMAG), was used as a polymer carrier. In addition to monoconjugates containing CT linked to PMAG by hydrolyzable and stable bonds, a set of complex conjugates also containing the siderophore deferoxamine (DFOA) and vitamin B12 was developed. The structures of the conjugates were confirmed by 1H NMR and FTIR-spectroscopy, while the compositions of conjugates were determined by UV-Vis spectrophotometry and HPLC analysis. The buffer media with pH 7.4, corresponding to blood or ileum pH, and 5.2, corresponding to the intestinal pH after ingestion or pH in the focus of inflammation, were used to study the release of CT. The resulting conjugates were examined for cytotoxicity and antimicrobial activity. All conjugates showed less cytotoxicity than free colistin. A Caco-2 cell permeability assay was carried out for complex conjugates to simulate the drug absorption in the intestine. In contrast to free CT, which showed very low permeability through the Caco-2 monolayer, the complex polymeric conjugates of vitamin B12 and CT provided significant transport. The antimicrobial activity of the conjugates depended on the conjugate composition. It was found that conjugates containing CT linked to the polymer by a hydrolyzable bond were found to be more active than conjugates with a non-hydrolyzable bond between CT and PMAG. Conjugates containing DFOA complexed with Fe3+ were characterized by enhanced antimicrobial activity against Pseudomonas aeruginosa compared to other conjugates.

Negatively charged nanodiscs for the reduction of toxicity and enhanced efficacy of polymyxin B against Acinetobacter baumannii sepsis

The treatment of sepsis caused by multidrug-resistant (MDR) Gram-negative bacterial infections remains challenging. With these pathogens exhibiting resistance to carbapenems and new generation cephalosporins, the traditional antibiotic polymyxin B (PMB) has reemerged as a critical treatment option. However, its severe neurotoxicity and nephrotoxicity greatly limit the clinical application. Therefore, we designed negatively charged high-density lipoprotein (HDL) mimicking nanodiscs as a PMB delivery system, which can simultaneously reduce toxicity and enhance drug efficacy. The negative charge prevented the PMB release in physiological conditions and binding to cell membranes, significantly reducing toxicity in mammalian cells and mice. Notably, nanodisc-PMB exhibits superior efficacy than free PMB in sepsis induced by carbapenem-resistant Acinetobacter baumannii (CRAB) strains. Nanodisc-PMB shows promise as a treatment for carbapenem-resistant Gram-negative bacterial sepsis, especially caused by Acinetobacter baumannii, and the nanodiscs could be repurposed for other toxic antibiotics as an innovative delivery system. STATEMENT OF SIGNIFICANCE: Multidrug-resistant Gram-negative bacteria, notably carbapenem-resistant Acinetobacter baumannii, currently pose a substantial challenge due to the scarcity of effective treatments, rendering Polymyxins a last-resort antibiotic option. However, their therapeutic application is significantly limited by severe neurotoxic and nephrotoxic side effects. Prevailing polymyxin delivery systems focus on either reducing toxicity or enhancing bioavailability yet fail to simultaneously achieve both. In this scenario, we have developed a distinctive HDL-mimicking nanodisc for polymyxin B, which not only significantly reduces toxicity but also improves efficacy against Gram-negative bacteria, especially in sepsis caused by CRAB. This research offers an innovative drug delivery system for polymyxin B. Such advancement could notably improve the therapeutic landscape and make a significant contribution to the arsenal against these notorious pathogens.

Crafting Stable Antibiotic Nanoparticles via Complex Coacervation of Colistin with Block Copolymers

To combat the ever-growing increase of multidrug-resistant (MDR) bacteria, action must be taken in the development of antibiotic formulations. Colistin, an effective antibiotic, was found to be nephrotoxic and neurotoxic, consequently leading to a ban on its use in the 1980s. A decade later, colistin use was revived and nowadays used as a last-resort treatment against Gram-negative bacterial infections, although highly regulated. If cytotoxicity issues can be resolved, colistin could be an effective option to combat MDR bacteria. Herein, we investigate the complexation of colistin with poly(ethylene oxide)-b-poly(methacrylic acid) (PEO-b-PMAA) block copolymers to form complex coacervate core micelles (C3Ms) to ultimately improve colistin use in therapeutics while maintaining its effectiveness. We show that well-defined and stable micelles can be formed in which the cationic colistin and anionic PMAA form the core while PEO forms a protecting shell. The resulting C3Ms are in a kinetically arrested and stable state, yet they can be made reproducibly using an appropriate experimental protocol. By characterization through dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS), we found that the best C3M formulation, based on long-term stability and complexation efficiency, is at charge-matching conditions. This nanoparticle formulation was compared to noncomplexed colistin on its antimicrobial properties, enzymatic degradation, serum protein binding, and cytotoxicity. The studies indicate that the antimicrobial properties and cytotoxicity of the colistin-C3Ms were maintained while protein binding was limited, and enzymatic degradation decreased after complexation. Since colistin-C3Ms were found to have an equal effectivity but with increased cargo protection, such nanoparticles are promising components for the antibiotic formulation toolbox.

Evaluating the antibacterial effect of meropenem-loaded chitosan/sodium tripolyphosphate (TPP) nanoparticles on Acinetobacter baumannii isolated from hospitalized patients

BACKGROUND

Acinetobacter baumannii is a health threat due to its antibiotic resistance. Herein, antibiotic susceptibility and its association with the Toxin-antitoxin (TA) system genes in A. baumannii clinical isolates from Iran were investigated. Next, we prepared meropenem-loaded chitosan nanoparticles (MP-CS) and investigated their antibacterial effects against meropenem-susceptible bacterial isolates.

METHODS

Out of 240 clinical specimens, 60 A. baumannii isolates were assessed. Antibiotic resistance of the isolates against conventional antibiotics was determined alongside investigating the presence of three TA system genes (mazEF, relBE, and higBA). Chitosan nanoparticles were characterized in terms of size, zeta potential, encapsulation efficiency, and meropenem release activity. Their antibacterial effects were assessed using the well diffusion method, minimum inhibitory concentration (MIC), and colony-forming unit (CFU) counting. Their cytotoxic effects and biocompatibility index were determined via the MTT, LDH, and ROS formation assays.

RESULTS

Ampicillin, ceftazidime, and colistin were the least effective, and amikacin and tobramycin were the most effective antibiotics. Out of the 60 isolates, 10 (16.7%), 5 (8.3%), and 45 (75%) were multidrug-resistant (MDR), extensively drug-resistant (XDR), and pandrug-resistant (PDR), respectively. TA system genes had no significant effect on antibiotic resistance. MP-CS nanoparticles demonstrated an average size of 191.5 and zeta potential of 27.3 mV alongside a maximum encapsulation efficiency of 88.32% and release rate of 69.57%. MP-CS nanoparticles mediated similar antibacterial effects, as compared with free meropenem, against the A. baumannii isolates with significantly lower levels of meropenem. MP-CS nanoparticles remarkably prevented A549 and NCI-H292 cell infection by the A. baumannii isolates alongside demonstrating a favorable biocompatibility index.

CONCLUSION

Antibiotic-loaded nanoparticles should be further designed and investigated to increase their antibacterial effect against A. baumannii and assess their safety and applicability in vivo settings.

Essential considerations towards development of effective nasal antibiotic formulation: features, strategies, and future directions

INTRODUCTION

Intranasal antibiotic products are gaining popularity as a promising method of administering antibiotics, which provide numerous benefits, e.g. enhancing drug bioavailability, reducing adverse effects, and potentially minimizing resistance threats. However, some issues related to the antibiotic substances and nasal route challenges must be addressed to prepare effective formulations.

AREAS COVERED

This review focuses on the valuable points of nasal delivery as an alternative route for administering antibiotics, coupled with the challenges in the nasal cavity that might affect the formulations. Moreover, this review also highlights the application of nasal delivery to introduce antibiotics for local therapy, brain targeting, and systemic effects that have been conducted. In addition, this viewpoint provides strategies to maintain antibiotic stability and several crucial aspects to be considered for enabling effective nasal formulation.

EXPERT OPINION

In-depth knowledge and understanding regarding various key considerations with respect to the antibiotic substances and nasal route delivery requirement in preparing effective nasal antibiotic formulation would greatly improve the development of nasally administered antibiotic products, enabling better therapeutic outcomes of antibiotic treatment and establishing appropriate use of antibiotics, which in turn might reduce the chance of antibiotic resistance and enhance patient comfort.

Antibiotics against Pseudomonas aeruginosa on Human Skin Cell Lines: Determination of the Highest Non-Cytotoxic Concentrations with Antibiofilm Capacity for Wound Healing Strategies

Pseudomonas aeruginosa is one of the most common microorganisms causing infections of severe skin wounds. Antibiotic or antiseptic treatments are crucial to prevent and curb these infections. Antiseptics have been reported to be cytotoxic to skin cells and few studies evaluate the impact of commonly used antibiotics. This study evaluates how clinical antibiotics affect skin cells' viability, proliferation, migration, and cytokine secretion and defines the highest non-cytotoxic concentrations that maintain antibacterial activity. Cell proliferation, viability, and migration were evaluated on cell monolayers. Cytokines related to the wound healing process were determined. The minimum inhibitory concentrations and the impact on bacterial biofilm were assessed. Results showed that 0.02 mg/mL ciprofloxacin and 1 mg/mL meropenem are the highest non-cytotoxic concentrations for fibroblasts and keratinocytes while 1.25 mg/mL amikacin and 0.034 mg/mL colistin do not affect fibroblasts' viability and cytokine secretion but have an impact on keratinocytes. These concentrations are above the minimum inhibitory concentration but only amikacin could eradicate the biofilm. For the other antibiotics, cytotoxic concentrations are needed to eradicate the biofilm. Combinations with colistin at non-cytotoxic concentrations effectively eliminate the biofilm. These results provide information about the concentrations required when administering topical antibiotic treatments on skin lesions, and how these antibiotics affect wound management therapies. This study set the basis for the development of novel antibacterial wound healing strategies such as antibiotic artificial skin substitutes.

Particle carriers for controlled release of peptides

There has been growing discovery and use of therapeutic peptides in drug delivery and tissue engineering. Peptides are smaller than proteins and can be formulated into drug delivery systems without significant loss of their bioactivity, which remains a concern with proteins. However, the smaller size of peptides has made the controlled release of these bioactive molecules from carriers challenging. Thus, there has been increasing development of carriers to improve the controlled release of peptides by leveraging hydrophobic and electrostatic interactions between the peptide and the carrier. The focus of this review paper is to critically discuss synthetic and natural nanoparticles and microparticles that have been investigated for the controlled delivery of peptides with emphasis on the underlying interactions.

A pH/enzyme dual responsive PMB spatiotemporal release hydrogel promoting chronic wound repair

Suppressing persistent multidrug-resistant (MDR) bacterial infections and excessive inflammation is the key for treating chronic wounds. Therefore, developing a microenvironment-responsive material with good biodegradability, drug-loading, anti-infection, and anti-inflammatory properties is desired to boost the chronic wounds healing process; however, using ordinary assembly remains a defect. Herein, we propose a pH/enzyme dual-responsive polymyxin B (PMB) spatiotemporal-release hydrogel (GelMA/OSSA/PMB), namely, the amount of OSSA and PMB released from GelMA/OSSA/PMB was closely related the wound pH and the enzyme concentration changing. The GelMA/OSSA/PMB showed better biosafety than equivalent free PMB, owing to the controlled release of PMB, which helped kill planktonic bacteria and inhibit biofilm activity in vitro. In addition, the GelMA/OSSA/PMB exhibited excellent antibacterial and anti-inflammatory properties. A MDR Pseudomonas aeruginosa caused infection was effectively resolved by the GelMA/OSSA/PMB hydrogel in vivo, thereby significantly boosting wound closure during the inflammatory phase. Furthermore, GelMA/OSSA/PMB accelerated the sequential phases of wound repair.

Peptide Antibiotic-Polyphosphate Nanoparticles: A Promising Strategy to Overcome the Enzymatic and Mucus Barrier of the Intestine

The aim of this study was to develop peptide antibiotic-polyphosphate nanoparticles that are able to overcome the enzymatic and mucus barriers providing a targeted drug release directly on the intestinal epithelium. Polymyxin B-polyphosphate nanoparticles (PMB-PP NPs) were formed via ionic gelation between the cationic peptide and the anionic polyphosphate (PP). The resulting NPs were characterized by particle size, polydispersity index (PDI), zeta potential, and cytotoxicity on Caco-2 cells. The protective effect of these NPs for incorporated PMB was evaluated via enzymatic degradation studies with lipase. Moreover, mucus diffusion of NPs was investigated with porcine intestinal mucus. Isolated intestinal alkaline phosphatase (IAP) was employed to trigger the degradation of NPs and consequent drug release. PMB-PP NPs exhibited an average size of 197.13 ± 14.13 nm, a PDI of 0.36, a zeta potential of -11.1 ± 3.4 mV and a concentration and time-dependent toxicity. They provided entire protection toward enzymatic degradation and exhibited significantly (p < 0.05) higher mucus permeating properties than PMB. When incubated with isolated IAP for 4 h, monophosphate and PMB were constantly released from PMB-PP NPs and zeta potential raised up to -1.9 ± 0.61 mV. According to these findings, PMB-PP NPs are promising delivery systems to protect cationic peptide antibiotics against enzymatic degradation, to overcome the mucus barrier and to provide drug release directly at the epithelium.

Polymyxin B Conjugates with Bio-Inspired Synthetic Polymers of Different Nature

The emergence and growth of bacterial resistance to antibiotics poses an enormous threat to humanity in the future. In this regard, the discovery of new antibiotics and the improvement of existing ones is a priority task. In this study, we proposed the synthesis of new polymeric conjugates of polymyxin B, which is a clinically approved but limited-use peptide antibiotic. In particular, three carboxylate-bearing polymers and one synthetic glycopolymer were selected for conjugation with polymyxin B (PMX B), namely, poly(α,L-glutamic acid) (PGlu), copolymer of L-glutamic acid and L-phenylalanine (P(Glu-co-Phe)), copolymer of N-vinyl succinamic acid and N-vinylsuccinimide (P(VSAA-co-VSI)), and poly(2-deoxy-2-methacrylamido-D-glucose) (PMAG). Unlike PGlu and PMAG, P(Glu-co-Phe) and P(VSAA-co-VSI) are amphiphilic and form nanoparticles in aqueous media. A number of conjugates with different polymyxin B loading were synthesized and characterized. In addition, the complex conjugates of PGLu or PMAG with polymyxin B and deferoxamine (siderophore) were obtained. A release of PMX B from Schiff base and amide-linked polymer conjugates was studied in model buffer media with pH 7.4 and 5.8. In both cases, a more pronounced release was observed under slightly acidic conditions. The cytotoxicity of free polymers and PMX B as well as their conjugates was examined in human embryonic kidney cells (HEK 293T cell line). All conjugates demonstrated reduced cytotoxicity compared to the free antibiotic. Finally, the antimicrobial efficacy of the conjugates against Pseudomonas aeruginosa was determined and compared. The lowest values of minimum inhibitory concentrations (MIC) were observed for polymyxin B and polymyxin B/deferoxamine conjugated with PMAG. Among the polymers tested, PMAG appears to be the most promising carrier for delivery of PMX B in conjugated form due to the good preservation of the antimicrobial properties of PMX B and the ability of controlled drug release.

Naringenin Microsphere as a Novel Adjuvant Reverses Colistin Resistance via Various Strategies against Multidrug-Resistant Klebsiella pneumoniae Infection

The efficacy of colistin, the last option against multidrug-resistant (MDR) Gram-negative bacteria, is severely threatened by the prevalence of plasmid- or chromosome-mediated colistin resistance genes. Herein, naringenin has dramatically restored colistin sensitivity against colistin-resistant Klebsiella pneumoniae infection without affecting bacterial viability, inducing resistance and causing obvious cell toxicity. Mechanism analysis reveals that naringenin potentiates colistin activity by multiple strategies including inhibition of mobilized colistin resistance gene activity, repression of two-component system regulation, and acceleration of reactive oxygen species-mediated oxidative damage. A lung-targeted delivery system of naringenin microspheres has been designed to facilitate naringenin bioavailability, accompanied by an effective potentiation of colistin for Klebsiella pneumoniae infection. Consequently, a new recognition of naringenin microspheres has been elucidated to restore colistin efficacy against colistin-resistant Gram-negative pathogens, which may be an effective strategy of developing potential candidates for MDR Gram-negative bacteria infection.

Nanomaterials for Delivering Antibiotics in the Therapy of Pneumonia

Bacterial pneumonia is one of the leading causes of death worldwide and exerts a significant burden on health-care resources. Antibiotics have long been used as first-line drugs for the treatment of bacterial pneumonia. However, antibiotic therapy and traditional antibiotic delivery are associated with important challenges, including drug resistance, low bioavailability, and adverse side effects; the existence of physiological barriers further hampers treatment. Fortunately, these limitations may be overcome by the application of nanotechnology, which can facilitate drug delivery while improving drug stability and bioavailability. This review summarizes the challenges facing the treatment of bacterial pneumonia and also highlights the types of nanoparticles that can be used for antibiotic delivery. This review places a special focus on the state-of-the-art in nanomaterial-based approaches to the delivery of antibiotics for the treatment of pneumonia.

An inflammation-targeted nanoparticle with bacteria forced release of polymyxin B for pneumonia therapy

The epidemic of multidrug-resistant Gram-negative bacteria is an ever-growing global concern. Polymyxin B (PMB), a kind of "old fashioned" antibiotic, has been revived in clinical practice and mainly used as last-line antibiotics for otherwise untreatable serious infections because the incidence of the resistance to PMB is currently relatively low in comparison with other antibiotics in vivo owing to the unique bactericidal mechanism of PMB. However, serious adverse side effects, including nephrotoxicity and neurotoxicity, hamper its clinical application. Herein, we describe the development of a nanoparticle that can target sites of inflammation and forcedly release PMB specifically in the area of Gram-negative bacteria. This particle was constructed through the electrostatic self-assembly of hyaluronic acid (HA) and PMB molecules in order to realize the safe and effective treatment of pneumonia. After systemic administration, PMB-HA nanoparticles were found to actively accumulate in the lungs, precisely target the CD44 receptors over-expressed on the membrane of activated endothelial cells in inflammatory sites, and then come into contact with the bacteria resident in the damaged alveolar-capillary membrane. Due to the electrostatic and hydrophobic interactions between PMB and the lipopolysaccharide (LPS) in the outer membranes of bacteria, the PMB molecules in the PMB-HA nanoparticles are expected to escape from the nanoparticles to insert into the bacteria via competitive binding with LPS. Through shielding the cationic nature of PMB, PMB-HA nanoparticles also possess outstanding biosafety performance in comparison to free PMB. It is thus believed that this smart delivery system may pave a new way for the resurrection of PMB in the future clinical treatment of bacterial inflammatory diseases.

Silver Nanoparticles Conjugated with Colistin Enhanced the Antimicrobial Activity against Gram-Negative Bacteria

Colistin is a potent peptide antibiotic that is effective against Gram-negative bacteria. However, nephrotoxicity limited its clinical use. Silver nanoparticles (AgNPs) have gained attention as a potential antimicrobial agent and nanodrug carrier. The conjugation of antibiotics and AgNPs has been found to increase the activity and decrease drug toxicity. In this study, colistin was conjugated with AgNPs (Col-AgNPs), which was confirmed by Fourier-transform infrared (FT-IR) and energy-dispersive X-ray (EDX) spectra. The optimized Col-AgNPs had the proper characteristics, including spherical shape, monodispersity, nanosized particle, high surface charge, and good stability. The powder X-ray diffraction (PXRD) pattern supported the crystallinity of Col-AgNPs and AgNPs. The drug loading of Col-AgNPs was 11.55 ± 0.93%. Col-AgNPs had higher activity against Gram-negative bacteria (Escherichia coli, Klebsiella pneumonia, and Pseudomonas aeruginosa) than AgNPs and colistin. The mechanism of actions of Col-AgNPs involved membrane disruption and genomic DNA damage. The Col-AgNPs and AgNPs were biocompatible with human red blood cells and renal cells at concentrations up to 16 µg/mL. Interestingly, Col-AgNPs exhibited higher cell survival than AgNPs and colistin at 32 µg/mL. Our results revealed that the Col-AgNPs could enhance the antimicrobial activity and cell biocompatibility more than colistin and AgNPs.

Nanotechnologies for control of pathogenic microbial biofilms

Biofilms are formed at interfaces by microorganisms, which congregate in microstructured communities embedded in a self-produced extracellular polymeric substance (EPS). Biofilm-related infections are problematic due to the high resistance towards most clinically used antimicrobials, which is associated with high mortality and morbidity, combined with increased hospital stays and overall treatment costs. Several new nanotechnology-based approaches have recently been proposed for targeting resistant bacteria and microbial biofilms. Here we discuss the impacts of biofilms on healthcare, food processing and packaging, and water filtration and distribution systems, and summarize the emerging nanotechnological strategies that are being developed for biofilm prevention, control and eradication. Combination of novel nanomaterials with conventional antimicrobial therapies has shown great potential in producing more effective platforms for controlling biofilms. Recent developments include antimicrobial nanocarriers with enzyme surface functionality that allow passive infection site targeting, degradation of the EPS and delivery of high concentrations of antimicrobials to the residing cells. Several stimuli-responsive antimicrobial formulation strategies have taken advantage of the biofilm microenvironment to enhance interaction and passive delivery into the biofilm sites. Nanoparticles of ultralow size have also been recently employed in formulations to improve the EPS penetration, enhance the carrier efficiency, and improve the cell wall permeability to antimicrobials. We also discuss antimicrobial metal and metal oxide nanoparticle formulations which provide additional mechanical factors through externally induced actuation and generate reactive oxygen species (ROS) within the biofilms. The review helps to bridge microbiology with materials science and nanotechnology, enabling a more comprehensive interdisciplinary approach towards the development of novel antimicrobial treatments and biofilm control strategies.

Synthetic molecular evolution of antimicrobial peptides

As we learn more about how peptide structure and activity are related, we anticipate that antimicrobial peptides will be engineered to have strong potency and distinct functions and that synthetic peptides will have new biomedical applications, such as treatments for emerging infectious diseases. As a result of the enormous number of possible amino acid sequences and the low-throughput nature of antimicrobial peptide assays, computational tools for peptide design and optimization are needed for direct experimentation toward obtaining functional sequences. Recent developments in computational tools have improved peptide design, saving labor, reagents, costs, and time. At the same time, improvements in peptide synthesis and experimental platforms continue to reduce the cost and increase the throughput of peptide-drug screening. In this review, we discuss the current methods of peptide design and engineering, including in silico methods and peptide synthesis and screening, and highlight areas of potential improvement.

Hybrid Nanoparticles and Composite Hydrogel Systems for Delivery of Peptide Antibiotics

The growing number of drug-resistant pathogenic bacteria poses a global threat to human health. For this reason, the search for ways to enhance the antibacterial activity of existing antibiotics is now an urgent medical task. The aim of this study was to develop novel delivery systems for polymyxins to improve their antimicrobial properties against various infections. For this, hybrid core-shell nanoparticles, consisting of silver core and a poly(glutamic acid) shell capable of polymyxin binding, were developed and carefully investigated. Characterization of the hybrid nanoparticles revealed a hydrodynamic diameter of approximately 100 nm and a negative electrokinetic potential. The nanoparticles demonstrated a lack of cytotoxicity, a low uptake by macrophages, and their own antimicrobial activity. Drug loading and loading efficacy were determined for both polymyxin B and E, and the maximal loaded value with an appropriate size of the delivery systems was 450 µg/mg of nanoparticles. Composite materials based on agarose hydrogel were prepared, containing both the loaded hybrid systems and free antibiotics. The features of polymyxin release from the hybrid nanoparticles and the composite materials were studied, and the mechanisms of release were analyzed using different theoretical models. The antibacterial activity against Pseudomonas aeruginosa was evaluated for both the polymyxin hybrid and the composite delivery systems. All tested samples inhibited bacterial growth. The minimal inhibitory concentrations of the polymyxin B hybrid delivery system demonstrated a synergistic effect when compared with either the antibiotic or the silver nanoparticles alone.

Impact of colistin and colistin-loaded on alginate nanoparticles on pigs infected with a colistin-resistant enterotoxigenic Escherichia coli strain

Colistin is frequently used for the control of post-weaning diarrhoea in pigs. Colistin resistance caused by plasmidic genes is a public health issue. We evaluated, in experimental animal facilities, whether free colistin or colistin-loaded on alginate nanoparticles (colistin/Alg NPs) could select a colistin-resistant Enterotoxigenic Escherichia coli. The Alg NPs were produced by a simple top-down approach through ball milling of sodium alginate polymer precursor, and colistin loading was achieved through physical adsorption. Colistin loading on Alg NPs was confirmed using various tools such Fourier transform infrared spectroscopy and dynamic light scattering measurements. Thirty-four piglets were orally inoculated or not with a mcr-1-positive, rifampicin-resistant enterotoxigenic E. coli strain, and the inoculated pigs were either treated or not during five days with commercial colistin (100,000 IU/kg) or colistin/Alg NPs (40,415 IU/kg). Clinical signs were recorded. Fecal and post-mortem samples were analyzed by culture. The result clearly indicated that colistin/Alg NPs had a slightly better therapeutic effect. Both treatments led to a transitory decrease of the total E. coli fecal population with a majority of colistin-resistant E. coli isolates during treatment, but the dominant E. coli population was found susceptible at the end of the trial. Further studies are needed to evaluate, in diverse experimental or field conditions, the therapeutic efficacy of colistin/Alg NPs for post-weaning diarrhoea.

An LC-MS/MS method for simultaneous analysis of the cystic fibrosis therapeutic drugs colistin, ivacaftor and ciprofloxacin

Inhaled antibiotics such as colistin and ciprofloxacin are increasingly used to treat bacterial lung infections in cystic fibrosis patients. In this study, we established and validated a new HPLC-MS/MS method that could simultaneously detect drug concentrations of ciprofloxacin, colistin and ivacaftor in rat plasma, human epithelial cell lysate, cell culture medium, and drug transport media. An aliquot of 200 μL drug-containing rat plasma or cell culture medium was treated with 600 μL of extraction solution (acetonitrile containing 0.1% formic acid and 0.2% trifluoroacetic acid (TFA)). The addition of 0.2% TFA helped to break the drug-protein bonds. Moreover, the addition of 0.1% formic acid to the transport medium and cell lysate samples could significantly improve the response and reproducibility. After vortexing and centrifuging, the sample components were analyzed by HPLC-MS/MS. The multiple reaction monitoring mode was used to detect the following transitions: 585.5-101.1 (colistin A), 578.5-101.1 (colistin B), 393.2-337.2 (ivacaftor), 332.2-314.2 (ciprofloxacin), 602.3-101.1 (polymyxin B1 as internal standard (IS)) and 595.4-101.1 (polymyxin B2 as IS). The running time of a single sample was only 6 min, making this a time-efficient method. Linear correlations were found for colistin A at 0.029-5.82 μg/mL, colistin B at 0.016-3.14 μg/mL, ivacaftor at 0.05-10.0 μg/mL, and ciprofloxacin at 0.043-8.58 μg/mL. Accuracy, precision, and stability of the method were within the acceptable range. This method would be highly useful for research on cytotoxicity, animal pharmacokinetics, and in vitro drug delivery.

Complexation of amoxicillin by transition metals: Physico-chemical and antibacterial activity evaluation

Some bacteria have developed resistance to antibiotics that were once commonly used to treat them. Moreover, this resistance has become more and more massive and worrying. During this work, we succeeded in synthesizing "metal-antibiotic" complexes, combining as a ligand for the metals of Cu (II), Zn (II) and Fe (III). These complexes AMX - M (M = Cu, Fe and Zn) were characterized by UV-Vis spectrophotometry, IR spectroscopy, and electrochemical methods. Job's method of continuous variation suggested 1:1 metals to ligand stoichiometry for all amoxicillin complexes. The binding constant/association constant (K) of the AMX with Zn(II), Cu(II), and Fe(III) were found to be 4.46 × 10⁴, 7.17 × 10² and 7.65 × 10² L mol^-1, respectively. The IR spectra shows that the ligands coordinated to the metal ions through amino, imino, carboxylate, β-lactamic and carbonyl groups. The electrochemical results proved that amoxicillin oxidation process can be delayed by transition metal complexation. After, the complex synthesis, the antibacterial activity of ligand and its metal complexes were evaluated against Escherichia. coli bacteria by antibiogram method. The results show that the metal-amoxicillin complexes have better antibacterial activity against Escherichia coli (E. coli) than the free ligand (amoxicillin) due to the AMX protection against oxidation after complexation.

Formulation of chitosan coated nanoliposomes for the oral delivery of colistin sulfate: in vitro characterization, 99mTc-radiolabeling and in vivo biodistribution studies

Colistin sulfate is a very important antibiotic for the treatment of multidrug-resistant Gram-negative infections. Unfortunately, it has low oral bioavailability and several side effects following parenteral administration. The present study aims to develop chitosan-coated colistin nanoliposomes to improve the stability in the gastrointestinal tract and to enhance the oral delivery of colistin. The chitosan-coated colistin nanoliposomes were obtained via thin-film evaporation and electrostatic deposition methods using either Span 60, Tween 65 or Tween 80 as surfactants with different cholesterol: surfactant: soya lecithin ratios. The influence of systems variables was further characterized by vesicle size analysis, zeta potential (ZP), poly dispersibility index (PDI), and also their entrapment efficiency percentage (EE %) was evaluated. Various systems were formed with vesicle sizes in the nano-range, 155.64 ± 12.53 nm to 315.64 ± 15.90 nm, and EE % of 45.2 ± 2.9% to 81.8 ± 2.9%. Moreover, the ZP value of the prepared nanoliposomes switched from a negative to a positive value after chitosan coating. To track the released colistin in vivo, technetium 99m (^99mTc) was incorporated into the optimum system (S-3) system via direct coupling with colistin. Chitosan-coated ^99mTc-colistin nanoliposome, ^99mTc-colistin suspension, and ^99mTc-chitosan-coated nanoliposomes (placebo) were administered orally into bacterial infection (Escherichia coli) bearing mice. The biodistribution results showed that chitosan-coated nanoliposome significantly enhanced the bioavailability of colistin compared to colistin suspension (the commercially available). Moreover, the system effectively improved the localization of colistin at the infected muscle. In conclusion, this approach offers a promising tool for enhanced oral delivery of colistin.

Antibiotic Cross-linked Micelles with Reduced Toxicity for Multidrug-Resistant Bacterial Sepsis Treatment

One potential approach to address the rising threat of antibiotic resistance is through novel formulations of established drugs. We designed antibiotic cross-linked micelles (ABC-micelles) by cross-linking the Pluronic F127 block copolymers with an antibiotic itself, via a novel one-pot synthesis in aqueous solution. ABC-micelles enhanced antibiotic encapsulation while also reducing systemic toxicity in mice. Using colistin, a hydrophilic, potent ″last-resort" antibiotic, ABC-micelle encapsulation yield was 80%, with good storage stability. ABC-micelles exhibited an improved safety profile, with a maximum tolerated dose of over 100 mg/kg colistin in mice, at least 16 times higher than the free drug. Colistin-induced nephrotoxicity and neurotoxicity were reduced in ABC-micelles by 10-50-fold. Despite reduced toxicity, ABC-micelles preserved bactericidal activity, and the clinically relevant combination of colistin and rifampicin (co-loaded in the micelles) showed a synergistic antimicrobial effect against antibiotic-resistant strains of Escherichia coli, Pseudomonas aeruginosa, and Acinetobacter baumannii. In a mouse model of sepsis, colistin ABC-micelles showed equivalent efficacy as free colistin but with a substantially higher therapeutic index. Microscopic single-cell imaging of bacteria revealed that ABC-micelles could kill bacteria in a more rapid manner with distinct cell membrane disruption, possibly reflecting a different antimicrobial mechanism from free colistin. This work shows the potential of drug cross-linked micelles as a new class of biomaterials formed from existing antibiotics and represents a new and generalized approach for formulating amine-containing drugs.

An overview of chitosan and its application in infectious diseases

Infectious diseases, such as the coronavirus disease-19, SARS virus, Ebola virus, and AIDS, threaten the health of human beings globally. New viruses, drug-resistant bacteria, and fungi continue to challenge the human efficacious drug bank. Researchers have developed a variety of new antiviral and antibacterial drugs in response to the infectious disease crisis. Meanwhile, the development of functional materials has also improved therapeutic outcomes. As a natural material, chitosan possesses good biocompatibility, bioactivity, and biosafety. It has been proven that the cooperation between chitosan and traditional medicine greatly improves the ability of anti-infection. This review summarized the application and design considerations of chitosan-composed systems for the treatment of infectious diseases, looking forward to providing the idea of infectious disease therapy.

Enhanced Antimicrobial and Antibiofilm Effect of New Colistin-Loaded Human Albumin Nanoparticles

Multidrug-resistant (MDR) Gram-negative bacteria (GNB), such as Acinetobacter and Klebsiella, are responsible for severe hospital-acquired infections. Colistin, despite its toxicity and low tissue penetration, is considered the last resort antibiotic against these microorganisms. Of concern, the use of Colistin has recently been compromised by the emergence of Colistin resistance. Herein, we developed a new formulation consisting of multifunctional chitosan-coated human albumin nanoparticles for the delivery of Colistin (Col/haNPs). Col/haNPs were in vitro characterized for encapsulation efficiency, drug release, stability and cytotoxicity and were evaluated for antibacterial activity against MDR GNB (Acinetobacter baumannii and Klebsiella pneumoniae). Col/haNPs showed sizes lower than 200 nm, high encapsulation efficiency (98.65%) and prolonged in vitro release of Colistin. The safety of the nanoformulation was demonstrated by a negligible cytotoxicity on human fibroblasts and hemolytic activity. Col/haNPs evidenced a high antibacterial effect with a significant decrease in MIC values compared to free Colistin, in particular against Col-resistant strains with a pronounced decline of bacterial growth over time. Moreover, Col/haNPs exhibited an inhibitory effect on biofilm formation that was 4 and 60 fold higher compared to free Colistin, respectively for Colistin susceptible and resistant A. baumannii. Our findings suggest that Col/haNPs could represent a promising Colistin nanocarrier with high antimicrobial activity on MDR GNB.

Polypeptide Self-Assembled Nanoparticles as Delivery Systems for Polymyxins B and E

Polymyxins are peptide antibiotics that are highly efficient against many multidrug resistant pathogens. However, the poor stability of polymyxins in the bloodstream requires the administration of high drug doses that, in turn, can lead to polymyxin toxicity. Consequently, different delivery systems have been considered for polymyxins to overcome these obstacles. In this work, we report the development of polymyxin delivery systems based on nanoparticles obtained from the self-assembly of amphiphilic random poly(l-glutamic acid-co-d-phenylalanine). These P(Glu-co-dPhe) nanoparticles were characterized in terms of their size, surface charge, stability, cytotoxicity, and uptake by macrophages. The encapsulation efficiency and drug loading into P(Glu-co-dPhe) nanoparticles were determined for both polymyxin B and E. The release kinetics of polymyxins B and E from nanoformulations was studied and compared in buffer solution and human blood plasma. The release mechanisms were analyzed using a number of mathematical models. The minimal inhibitory concentrations of the nanoformulations were established and compared with those determined for the free antibiotics.

The preparation of lipid-based drug delivery system using melt extrusion

Melt extrusion of lipids is versatile with high applicability in the pharmaceutical industry. The formulations prepared can be easily customized depending on the requirements, and have the potential to open a window on personalized medicine.

Inhalable Nanocomposite Microparticles with Enhanced Dissolution and Superior Aerosol Performance

Previous studies have shown that combining colistin (Col), a cationic polypeptide antibiotic, with ivacaftor (Iva), a cystic fibrosis (CF) drug, could achieve synergistic antibacterial effects against Pseudomonas aeruginosa. The purpose of this study was to develop dry powder inhaler formulations for co-delivery of Col and Iva, aiming to treat CF and lung infection simultaneously. In order to improve solubility and dissolution for the water-insoluble Iva, Iva was encapsulated into bovine serum albumin (BSA) nanoparticles (Iva-BSA-NPs). Inhalable composite microparticles of Iva-BSA-NPs were produced by spray-freeze-drying using water-soluble Col as the matrix material and l-leucine as an aerosol enhancer. The optimal formulation showed an irregularly shaped morphology with fine particle fraction (FPF) values of 73.8 ± 5.2% for Col and 80.9 ± 4.1% for Iva. Correlations between "D×ρtapped" and FPF were established for both Iva and Col. The amorphous solubility of Iva is 66 times higher than the crystalline solubility in the buffer. Iva-BSA-NPs were amorphous and remained in the amorphous state after spray-freeze-drying, as examined by powder X-ray diffraction. In vitro dissolution profiles of the selected DPI formulation indicated that Col and Iva were almost completely released within 3 h, which was substantially faster regarding Iva release than the jet-milled physical mixture of the two drugs. In summary, this study developed a novel inhalable nanocomposite microparticle using a synergistic water-soluble drug as the matrix material, which achieved reduced use of excipients for high-dose medications, improved dissolution rate for the water-insoluble drug, and superior aerosol performance.

Novel Siwa propolis and colistin-integrated chitosan nanoparticles: elaboration; in vitro and in vivo appraisal

Aim: The present study aimed to formulate novel cremophore-decorated chitosan nanoparticles of colistin, integrated with Siwa propolis extract, to solve bacterial resistance to colistin. Materials & methods: The novel nanoformula was prepared using an incorporation method. Physicochemical assessment and in vivo studies of the selected nanoformulations were performed. Results: The nanoformulation exhibited a nanosize of 48.3 nm, high ζ potential (43.6 mV), high entrapment efficiency (75%) and complete bacterial growth eradication within 2 h (minimum inhibitory concentration = 6.25 μg/ml). Histological examination showed that incorporation of colistin into the nanoformulation could successfully prevent its nephrotoxicity. Conclusion: Tailoring of proper nanocarrier could successfully revert bacteria from being colistin-resistant to colistin-sensitive. The developed nanoformulation can be considered as a potential antibacterial agent in pneumonia treatment.

Polymyxin Delivery Systems: Recent Advances and Challenges

Polymyxins are vital antibiotics for the treatment of multiresistant Gram-negative ESKAPE pathogen infections. However, their clinical value is limited by their high nephrotoxicity and neurotoxicity, as well as their poor permeability and absorption in the gastrointestinal tract. This review focuses on various polymyxin delivery systems that improve polymyxin bioavailability and reduce drug toxicity through targeted and controlled release. Currently, the most suitable systems for improving oral, inhalation, and parenteral polymyxin delivery are polymer particles, liposomes, and conjugates, while gels, polymer fibers, and membranes are attractive materials for topical administration of polymyxin for the treatment of infected wounds and burns. In general, the application of these systems protects polymyxin molecules from the negative effects of both physiological and pathological factors while achieving higher concentrations at the target site and reducing dosage and toxicity. Improving the properties of polymyxin will be of great interest to researchers who are focused on developing antimicrobial drugs that show increased efficacy and safety.

Polymyxin B-Polysaccharide Polyion Nanocomplex with Improved Biocompatibility and Unaffected Antibacterial Activity for Acute Lung Infection Management

The decade-old antibiotic, polymyxin B (PMB), is regarded as the last line defense against gram-negative "superbug." However, the serious nephrotoxicity and neurotoxicity strongly obstruct further application of this highly effective antibiotic. Herein, a charge switchable polyion nanocomplex exhibiting pH-sensitive property is proposed to deliver PMB which is expected to improve the biosafety of PMB on the premise of retaining excellent antibacterial activity. The polyion nanocomplex is prepared through electrostatic interaction of positively charged PMB and negatively charged 2,3-dimethyl maleic anhydride (DA) grafted chitoligosaccharide (CS). The negative charge of CS-DA will convert to positive due to the hydrolysis of amide bonds in acidic infectious environment, leading to the disassembly of CS-DA/PMB nanocomplex and release of PMB. CS-DA/PMB nanocomplex does not show significant toxicity to mammalian cells while retaining excellent bactericidal capability equivalent to free PMB. The nephrotoxicity and neurotoxicity of CS-DA/PMB dramatically decrease compared to free PMB. Moreover, CS-DA/PMB nanocomplex exhibits superior bactericidal activity against Pseudomonas aeruginosa in an acute lung infection mouse model. The pH-sensitive polyion nanocomplexes may provide a new way to reduce the side effects of highly toxic antibiotics without reducing their intrinsic antibacterial activity, which is the key factor to achieve extensive in vivo clinical applications.

Nanocarbon materials in water disinfection: state-of-the-art and future directions

Water disinfection practices are critical for supplying safe drinking water. Existing water disinfection methods come with various drawbacks, calling for alternative or complementary solutions. Nanocarbon materials (NCMs) offer unique advantages for water disinfection owing to their high antimicrobial activity, often low environmental/human toxicity, and tunable physicochemical properties. Nevertheless, it is a challenge to assess the research progress made so far due to the structure and property diversity in NCMs as well as their different targeted applications. Because of these, here we provide a broad outline of this emerging field in three parts. First, we introduce the antimicrobial activities of the different types of NCMs, including fullerenes, nanodiamonds, carbon (nano)dots, carbon nanotubes, and graphene-family materials. Next, we discuss the current status in applying these NCMs for different water disinfection problems, especially as hydrogel filters, filtration membranes, recyclable aggregates, and electrochemical devices. We also introduce the use of NCMs in photocatalysts for photocatalytic water disinfection. Lastly, we put forward the key hurdles of the field that hamper the realization of the practical applications and propose possible directions for future investigations to address those. We hope that this minireview will encourage researchers to tackle these challenges and innovate NCM-based water disinfection platforms in the near future.