Bimodal antibacterial system based on quaternary ammonium silane-coupled core-shell hollow mesoporous silica

Antibiofilm activity of mesoporous silica nanoparticles against the biofilm associated infections

In pharmaceutical industries, various chemical carriers are present which are used for drug delivery to the correct target sites. The most popular and upcoming drug delivery carriers are mesoporous silica nanoparticles (MSN). The main reason for its popularity is its ability to be specific and optimize the drug delivery process in a controlled manner. Nowadays, MSNs are widely used to eradicate various microbial infections, especially the ones related to biofilms. Biofilms are sessile groups of cells that live by forming a consortium and exhibit antibacterial resistance (AMR). They exhibit AMR by extracellular polymeric substances (EPS) and various quorum sensing (QS) signaling molecules. Usually, bacterial and fungal cells are capable of forming biofilms. These biofilms are pathogenic. In the majority of the cases, biofilms cause nosocomial diseases. This review will focus on the antibiofilm activities of MSN, its mechanism of target-specific drug delivery, and its ability to disrupt the bacterial biofilms inhibiting the infection. The review will also discuss various mechanisms for the delivery of pharmaceutical molecules by the MSNs to inhibit the bacterial biofilms, and lastly, we will talk about the different types of MSNs and their antibiofilm activities.

Enhancing the inhibition of dental erosion and abrasion with quercetin-encapsulated hollow mesoporous silica nanocomposites

Introduction: Dental erosion and abrasion pose significant clinical challenges, often leading to exposed dentinal tubules and dentine demineralization. The aim of this study was to analyse the efficacy of quercetin-encapsulated hollow mesoporous silica nanocomposites (Q@HMSNs) on the prevention of dentine erosion and abrasion. Method: Q@HMSNs were synthesized, characterized, and evaluated for their biocompatibility. A total of 130 dentine specimens (2 mm × 2 mm × 2 mm) were prepared and randomly distributed into 5 treatment groups (n = 26): DW (deionized water, negative control), NaF (12.3 mg/mL sodium fluoride, positive control), Q (300 μg/mL quercetin), HMSN (5.0 mg/mL HMSNs), and Q@HMSN (5.0 mg/mL Q@HMSNs). All groups were submitted to in vitro erosive (4 cycles/d) and abrasive (2 cycles/d) challenges for 7 days. The specimens in the DW, NaF, and Q groups were immersed in the respective solutions for 2 min, while treatment was performed for 30 s in the HMSN and Q@HMSN groups. Subsequently, the specimens were subjected to additional daily erosion/abrasion cycles for another 7 days. The effects of the materials on dentinal tubule occlusion and demineralized organic matrix (DOM) preservation were examined by scanning electron microscopy (SEM). The penetration depth of rhodamine B fluorescein into the etched dentine was assessed using confocal laser scanning microscopy (CLSM). The erosive dentine loss (EDL) and release of type I collagen telopeptide (ICTP) were measured. The data were analysed by one-way analysis of variance (ANOVA) with post hoc Tukey's test (α = 0.05). Results: Q@HMSNs were successfully synthesized and showed minimal toxicity to human dental pulp stem cells (HDPSCs) and gingival fibroblasts (HGFs). Q@HMSNs effectively occluded the dentinal tubules, resulting in a thicker DOM in the Q@HMSN group. The CLSM images showed more superficial penetration in the HMSN and Q@HMSN groups than in the quercetin, NaF, and DW groups. The Q@HMSN group exhibited a significantly lower EDL and reduced ICTP levels compared to the other groups (p < 0.05). Conclusion: Q@HMSNs hold promise for inhibiting dentine erosion and abrasion by promoting tubule occlusion and DOM preservation.

Silica nanoparticles containing nano-silver and chlorhexidine respond to pH to suppress biofilm acids and modulate biofilms toward a non-cariogenic composition

OBJECTIVES

Dental caries is caused by acids from biofilms. pH-sensitive nanoparticle carriers could achieve improved targeted effectiveness. The objectives of this study were to develop novel mesoporous silica nanoparticles carrying nanosilver and chlorhexidine (nMS-nAg-Chx), and investigate the inhibition of biofilms as well as the modulation of biofilm to suppress acidogenic and promote benign species for the first time.

METHODS

nMS-nAg was synthesized via a modified sol-gel method. Carboxylate group functionalized nMS-nAg (COOH-nMS-nAg) was prepared and Chx was added via electrostatic interaction. Minimal inhibitory concentration (MIC), inhibition zone, and growth curves were evaluated. Streptococcus mutans (S. mutans), Streptococcus gordonii (S. gordonii), and Streptococcus sanguinis (S. sanguinis) formed multispecies biofilms. Metabolic activity, biofilm lactic acid, exopolysaccharides (EPS), and TaqMan real-time polymerase chain reaction (RT-PCR) were tested. Biofilm structures and biomass were observed by scanning electron microscopy (SEM) and live/dead bacteria staining.

RESULTS

nMS-nAg-Chx possessed pH-responsive properties, where Chx release increased at lower pH. nMS-nAg-Chx showed good biocompatibility. nMS-nAg-Chx exhibited a strong antibacterial function, reducing biofilm metabolic activity and lactic acid as compared to control (p < 0.05, n = 6). Moreso, biofilm biomass was dramatically suppressed in nMS-nAg-Chx groups. In control group, there was an increasing trend of S. mutans proportion in the multispecies biofilm, with S. mutans reaching 89.1% at 72 h. In sharp contrast, in nMS-nAg-Chx group of 25 μg/mL, the ratio of S. mutans dropped to 43.7% and the proportion of S. gordonii and S. sanguinis increased from 19.8% and 10.9 to 69.8% and 56.3%, correspondingly.

CONCLUSION

pH-sensitive nMS-nAg-Chx had potent antibacterial effects and modulated biofilm toward a non-cariogenic tendency, decreasing the cariogenic species nearly halved and increasing the benign species approximately twofold. nMS-nAg-Chx is promising for applications in mouth rinse and endodontic irrigants, and as fillers in resins to prevent caries.

Metronidazole and Ketoprofen-Loaded Mesoporous Magnesium Carbonate for Rapid Treatment of Acute Periodontitis In Vitro

In the clinical pharmacological treatment of acute periodontitis, local periodontal administration is expected to be preferable to systemic administration. However, the action of the active medicine component is hindered and diminished by the limitation of drug solubility, which does not provide timely relief of the enormous pain being suffered by patients. This study aimed to develop a mesoporous magnesium carbonate (MMC) medicine loading system consisting of MMC, metronidazole (MET), and ketoprofen (KET), which was noted as MET-KET@MMC. A solvent evaporation process was utilized to load MET and KET in MMC. Scanning electron microscopy, nitrogen sorption, thermogravimetric analysis, and X-ray diffraction were performed on the MET-KET@MMC. The rapid drug release properties were also investigated through the drug release curve. The rapid antiseptic property against Porphyromonas gingivalis (P. gingivalis) and the rapid anti-inflammatory property (within 1 min) were analyzed in vitro. The cytotoxicity of MET-KET@MMC was tested in direct contact with human gingival cells and human oral keratinocytes. Crystallizations of MET and KET were completely suppressed in MMC. As compared to crystalline MET and KET, MMC induced higher apparent solubility and rapid drug release, resulting in 8.76 times and 3.43 times higher release percentages of the drugs, respectively. Over 70.11% of MET and 85.97% of KET were released from MMC within 1 min, resisting bacteria and reducing inflammation. MET-KET@MMC nanoparticles enhanced the solubility of drugs and possess rapid antimicrobial and anti-inflammatory properties. The MET-KET@MMC is a promising candidate for the pharmacotherapy of acute periodontitis with drugs, highlighting a significant clinical potential of MMC-based immediate drug release systems.

Epigallocatechin-3-gallate/mineralization precursors co-delivery hollow mesoporous nanosystem for synergistic manipulation of dentin exposure

As a global public health focus, oral health plays a vital role in facilitating overall health. Defected teeth characterized by exposure of dentin generally increase the risk of aggravating oral diseases. The exposed dentinal tubules provide channels for irritants and bacterial invasion, leading to dentin hypersensitivity and even pulp inflammation. Cariogenic bacterial adhesion and biofilm formation on dentin are responsible for tooth demineralization and caries. It remains a clinical challenge to achieve the integration of tubule occlusion, collagen mineralization, and antibiofilm functions for managing exposed dentin. To address this issue, an epigallocatechin-3-gallate (EGCG) and poly(allylamine)-stabilized amorphous calcium phosphate (PAH-ACP) co-delivery hollow mesoporous silica (HMS) nanosystem (E/PA@HMS) was herein developed. The application of E/PA@HMS effectively occluded the dentinal tubules with acid- and abrasion-resistant stability and inhibited the biofilm formation of Streptococcus mutans. Intrafibrillar mineralization of collagen fibrils and remineralization of demineralized dentin were induced by E/PA@HMS. The odontogenic differentiation and mineralization of dental pulp cells with high biocompatibility were also promoted. Animal experiments showed that E/PA@HMS durably sealed the tubules and inhibited biofilm growth up to 14 days. Thus, the development of the E/PA@HMS nanosystem provides promising benefits for protecting exposed dentin through the coordinated manipulation of dentin caries and hypersensitivity.

Demonstrating the In Vitro and In Situ Antimicrobial Activity of Oxide Mineral Microspheres: An Innovative Technology to Be Incorporated into Porous and Nonporous Materials

The antimicrobial activity of surfaces treated with zinc and/or magnesium mineral oxide microspheres is a patented technology that has been demonstrated in vitro against bacteria and viruses. This study aims to evaluate the efficiency and sustainability of the technology in vitro, under simulation-of-use conditions, and in situ. The tests were undertaken in vitro according to the ISO 22196:2011, ISO 20473:2013, and NF S90-700:2019 standards with adapted parameters. Simulation-of-use tests evaluated the robustness of the activity under worst-case scenarios. The in situ tests were conducted on high-touch surfaces. The in vitro results show efficient antimicrobial activity against referenced strains with a log reduction of >2. The sustainability of this effect was time-dependent and detected at lower temperatures (20 ± 2.5 °C) and humidity (46%) conditions for variable inoculum concentrations and contact times. The simulation of use proved the microsphere's efficiency under harsh mechanical and chemical tests. The in situ studies showed a higher than 90% reduction in CFU/25 cm² per treated surface versus the untreated surfaces, reaching a targeted value of <50 CFU/cm². Mineral oxide microspheres can be incorporated into unlimited surface types, including medical devices, to efficiently and sustainably prevent microbial contamination.

Mesoporous TiO2 Coatings Regulate ZnO Nanoparticle Loading and Zn2+ Release on Titanium Dental Implants for Sustained Osteogenic and Antibacterial Activity

Two major issues are currently hindering the clinical practice of titanium dental implants for the lack of biological activities: immediate/early loading risks and peri-implantitis. To solve these issues, it is urgent to develop multifunctional implants modified with effective osteogenic and antibacterial properties. Zinc oxide nanoparticles (ZnO NPs) possess superior antibacterial activity; however, they can rapidly release Zn²⁺, causing cytotoxicity. In this study, a potential dental implant modification was creatively developed as ZnO nanoparticle-loaded mesoporous TiO₂ coatings (nZnO/MTC-Ti) via the evaporation-induced self-assembly method (EISA) and one-step spin coating. The mesoporous TiO₂ coatings (MTCs) regulated the synthesis and loading of ZnO NPs inside the nanosized pores. The synergistic effects of MTC and ZnO NPs on nZnO/MTC-Ti not only controlled the long-term steady-state release of Zn²⁺ but also optimized the charge distribution on the surface. Therefore, the cytotoxicity of ZnO NPs was resolved without triggering excessive reactive oxygen species (ROS). The increased extracellular Zn²⁺ further promoted a favorable intracellular zinc ion microenvironment through the modulation of zinc transporters (ZIP1 and ZnT1). Owing to that, the adhesion, proliferation, and osteogenic activity of bone mesenchymal stem cells (BMSCs) were improved. Additionally, nZnO/MTC-Ti inhibited the proliferation of oral pathogens (Pg and Aa) by inducing bacterial ROS production. For in vivo experiments, different implants were implanted into the alveolar fossa of Sprague-Dawley rats immediately after tooth extraction. The nZnO/MTC-Ti implants were found to possess a higher capability for enhancing bone regeneration, antibiosis, and osseointegration in vivo. These findings suggested the outstanding performance of nZnO/MTC-Ti implants in accelerating osseointegration and inhibiting bacterial infection, indicating a huge potential for solving immediate/early loading risks and peri-implantitis of dental implants.

Recent nanotechnology-based strategies for interfering with the life cycle of bacterial biofilms

Biofilm formation plays an important role in the resistance development in bacteria to conventional antibiotics. Different properties of the bacterial strains within biofilms compared with their planktonic states and the protective effect of extracellular polymeric substances contribute to the insusceptibility of bacterial cells to conventional antimicrobials. Although great effort has been devoted to developing novel antibiotics or synthetic antibacterial compounds, their efficiency is overshadowed by the growth of drug resistance. Developments in nanotechnology have brought various feasible strategies to combat biofilms by interfering with the biofilm life cycle. In this review, recent nanotechnology-based strategies for interfering with the biofilm life cycle according to the requirements of different stages are summarized. Additionally, the importance of strategies that modulate the bacterial biofilm microenvironment is also illustrated with specific examples. Lastly, we discussed the remaining challenges and future perspectives on nanotechnology-based strategies for the treatment of bacterial infection.

Multifunctional Mesoporous Silica Nanoparticles Reinforced Silk Fibroin Composite with Antibacterial and Osteogenic Effects for Infectious Bone Rehabilitation

BACKGROUND

Existing implant materials cannot meet the essential multifunctional requirements of repairing infected bone defects, such as antibacterial and osteogenesis abilities. A promising strategy to develop a versatile biomimicry composite of the natural bone structure may be accomplished by combining a multifunctional nanoparticle with an organic scaffold.

METHODS

In this study, a quaternary ammonium silane-modified mesoporous silica containing nano silver (Ag@QHMS) was successfully synthesized and further combined with silk fibroin (SF) to fabricate the multifunctional nano-reinforced scaffold (SF-Ag@QHMS) using the freeze-drying method. Furthermore, the antibacterial and osteogenic effects of this composite were evaluated in vitro and in vivo.

RESULTS

SF-Ag@QHMS inherited a three-dimensional porous structure (porosity rate: 91.90 ± 0.62%) and better mechanical characteristics (2.11 ± 0.06 kPa) than that of the SF scaffold (porosity rate: 91.62 ± 1.65%; mechanic strength: 2.02 ± 0.01 kPa). Simultaneously, the introduction of versatile nanoparticles has provided the composite with additional antibacterial ability against Porphyromonas gingivalis, which can be maintained for 15 days. Furthermore, the expression of osteogenic-associated factors was up-regulated due to the silver ions eluting from the composite scaffold. The in vivo micro-CT and histological results indicated that the new bone formation was not only localized around the border of the defect but also arose more in the center with the support of the composite.

CONCLUSION

The multifunctional silver-loaded mesoporous silica enhanced the mechanical strength of the composite while also ensuring greater and sustained antibacterial and osteogenic properties, allowing the SF-Ag@QHMS composite to be used to repair infected bone defects.

Recent Update on Applications of Quaternary Ammonium Silane as an Antibacterial Biomaterial: A Novel Drug Delivery Approach in Dentistry

Quaternary ammonium silane [(QAS), codename – k21] is a novel biomaterial developed by sol-gel process having broad spectrum antimicrobial activities with low cytotoxicity. It has been used in various concentrations with maximum antimicrobial efficacy and biocompatibility. The antimicrobial mechanism is displayed via contact killing, causing conformational changes within the bacterial cell membrane, inhibiting Sortase-A enzyme, and causing cell disturbances due to osmotic changes. The compound can attach to S1' pockets on matrix metalloproteinases (MMPs), leading to massive MMP enzyme inhibition, making it one of the most potent protease inhibitors. Quaternary ammonium silane has been synthesized and used in dentistry to eliminate the biofilm from dental tissues. QAS has been tested for its antibacterial activity as a cavity disinfectant, endodontic irrigant, restorative and root canal medication, and a nanocarrier for drug delivery approaches. The review is first of its kind that aims to discuss applications of QAS as a novel antibacterial biomaterial for dental applications along with discussions on its cytotoxic effects and future prospects in dentistry.

Metronidazole Delivery Nanosystem Able To Reduce the Pathogenicity of Bacteria in Colorectal Infection

Metronidazole (MTZ) is a drug potentially used for the treatment of intestinal infections, namely, the ones caused by colorectal surgery. The traditional routes of administration decrease its local effectiveness and present off-site effects. To circumvent such limitations, herein a drug delivery system (DDS) based on MTZ-loaded nanoparticles (NPs) immobilized at the surface of electrospun fibrous meshes is proposed. MTZ at different concentrations (1, 2, 5, and 10 mg mL^-1) was loaded into chitosan-sodium tripolyphosphate NPs. The MTZ loaded into NPs at the highest concentration showed a quick release in the first 12 h, followed by a gradual release. This DDS was not toxic to human colonic cells. When tested against different bacterial strains, a significant reduction of Escherichia coli and Staphylococcus aureus was observed, but no effect was found against Enterococcus faecalis. Therefore, this DDS offers high potential to locally prevent the occurrence of infections after colorectal anastomosis.

pH-Responsive Hybrid Nanoparticles for Imaging Spatiotemporal pH Changes in Biofilm-Dentin Microenvironments

Engineering highly sensitive nanomaterials to monitor spatiotemporal pH changes has rather broad applications in studying various biological systems. Intraoral/biofilm-tooth pH is the single parameter that has demonstrated accurate assessment of dental caries risk, reflecting the summative integrated outcome of the complicated interactions between three etiological factors, namely, microorganisms/biofilm, diet/carbohydrates, and tooth/saliva/host. However, there is little to no technology/system capable of accurately probing simultaneously both the micro-pH profiles in dentin tissues and acidogenic oral biofilms and examining the pathophysiologic acid attacks with high spatial/temporal resolution. Therefore, a highly sensitive pH-responsive hybrid nanoparticle (pH-NP) is developed and coupled with an ex vivo tooth-biofilm caries model to simulate and study the key cariogenic determinants/steps. The pH-NP emits two distinct fluorescences with mutually inversely proportional intensities that vary accordingly to the proximity pH and with a ratiometric output sensitivity of 13.4-fold across a broad clinically relevant pH range of 3.0-8.0. Using [H⁺], in addition to pH, to calculate the "area-under-curve" corroborates the "minimum-pH" in semiquantifying the demineralizing potential in each biofilm-dentin zones/depth. The data mechanistically elucidates a two-pronged cariogenic effect of a popular-acidic-sweet-drink, in inundating the biofilm/tooth-system with H⁺ ions from both the drink and the metabolic byproducts of the biofilm.

Chitosan modified ultra-thin hollow nanoparticles for photosensitizer loading and enhancing photodynamic antibacterial activities

Antibacterial photodynamic therapy (PDT) has attracted extremely attention due to not inducing bacteria to generate resistance. However, the poor utilization and low reactive oxygen species (ROS) field of photosensitizers hinder their further application for antibacterial. Here, we designed ultra-thin hollow silica nanoparticles (UHSN), followed by pore-engineering including covalent anchoring of chitosan (UHSN@CS) for enhanced loading and photodynamic property of photosensitizer. The UHSN@CS exhibit high loading efficiency (80.6%, pH = 6.0) and controllable pH-responsive release for Ce6. Additionally, UHSN@CS can enhance the ROS yield of photosensitizers and effectively adhere to S. aureus, thus enormously enhancing antibacterial performance toward bacteria. Moreover, UHSN@CS-Ce6 can obliterate mature S. aureus biofilm and cause an 81% decrease in the biomass, showing a better therapeutic effect than Ce6 (59.2%) under laser irradiation. In vivo results confirm that UHSN@CS-Ce6 is effective to promote infectious wound regeneration. As photodynamic-based nanoplatforms, UHSN@CS-Ce6 are potential antibacterial agents for skin infection therapy.

Recent Advances Toward the Use of Mesoporous Silica Nanoparticles for the Treatment of Bacterial Infections

It is a fact that the use of antibiotics is inducing a growing resistance on bacteria. This situation is not only the consequence of a drugs’ misuse, but a direct consequence of a widespread and continuous use. Current studies suggest that this effect could be reversed by using abandoned antibiotics to which bacteria have lost their resistance, but this is only a temporary solution that in near future would lead to new resistance problems. Fortunately, current nanotechnology offers a new life for old and new antibiotics, which could have significantly different pharmacokinetics when properly delivered; enabling new routes able to bypass acquired resistances. In this contribution, we will focus on the use of porous silica nanoparticles as functional carriers for the delivery of antibiotics and biocides in combination with additional features like membrane sensitizing and heavy metal-driven metabolic-disrupting therapies as two of the most interesting combination therapies.

Mesoporous silica nanoparticles as carriers of active agents for smart anticorrosive organic coatings: a critical review

Mesoporous silica nanoparticles (MSN) have attracted increasing interest for their applicability as smart nanocarriers of corrosion inhibitors, due to their porous structure, resistance to main corrosive environments and good compatibility with polymer coatings. In this review, the main synthetic routes to obtain MSN with tailored textural properties, the design of different loading and stimuli-induced release strategies, the development of advanced organic nanocomposite coatings with MSN and the validation of their anticorrosive performances are reviewed and compared. Through a critical analysis of the literature, the most promising research trends and perspectives to exploit the highly interesting properties of MSN in advanced organic coatings are proposed.

Akim A, Chong PP. Approaches for Mitigating Microbial Biofilm-Related Drug Resistance: A Focus on Micro- and Nanotechnologies

Biofilms play an essential role in chronic and healthcare-associated infections and are more resistant to antimicrobials compared to their planktonic counterparts due to their (1) physiological state, (2) cell density, (3) quorum sensing abilities, (4) presence of extracellular matrix, (5) upregulation of drug efflux pumps, (6) point mutation and overexpression of resistance genes, and (7) presence of persister cells. The genes involved and their implications in antimicrobial resistance are well defined for bacterial biofilms but are understudied in fungal biofilms. Potential therapeutics for biofilm mitigation that have been reported include (1) antimicrobial photodynamic therapy, (2) antimicrobial lock therapy, (3) antimicrobial peptides, (4) electrical methods, and (5) antimicrobial coatings. These approaches exhibit promising characteristics for addressing the impending crisis of antimicrobial resistance (AMR). Recently, advances in the micro- and nanotechnology field have propelled the development of novel biomaterials and approaches to combat biofilms either independently, in combination or as antimicrobial delivery systems. In this review, we will summarize the general principles of clinically important microbial biofilm formation with a focus on fungal biofilms. We will delve into the details of some novel micro- and nanotechnology approaches that have been developed to combat biofilms and the possibility of utilizing them in a clinical setting.

A Multifunctional Antibacterial and Osteogenic Nanomedicine: QAS-Modified Core-Shell Mesoporous Silica Containing Ag Nanoparticles

Treatments for infectious bone defects such as periodontitis require antibacterial and osteogenic differentiation capabilities. Nanotechnology has prompted the development of multifunctional material. In this research, we aim to synthesize a nanoparticle that can eliminate periodontal pathogenic microorganisms and simultaneously stimulate new bone tissue regeneration and mineralization. QAS-modified core-shell mesoporous silica containing Ag nanoparticles (Ag@QHMS) was successfully synthesized through the classic hydrothermal method and surface quaternary ammonium salt functionalization. The Ag@QHMS in vitro antibacterial activity was explored via coculture with Staphylococcus aureus, Escherichia coli, and Porphyromonas gingivalis biofilms. Bone mesenchymal stem cells (BMSCs) were selected for observing cytotoxicity, apoptosis, and osteogenic differentiation. Ag@QHMS showed a good sustained release profile of Ag⁺ and a QAS-grafted mesoporous structure. Compared with the single-contact antibacterial activity of QHMS, Ag@QHMS exhibited a more efficient and stable concentration-dependent antimicrobial efficacy; the minimum inhibitory concentration was within 100 μg/ml, which was below the BMSC biocompatibility concentration (200 μg/ml). Thus, apoptosis would not occur while promoting the increased expression of osteogenic-associated factors, such as runt-related transcription factor 2 (RUNX2), alkaline phosphatase (ALP), osteopontin (OPN), osteocalcin (OCN), bone sialoprotein (BSP), and collagen type 1 (COL-1). A safe concentration of particles can stimulate cell alkaline phosphatase and matrix calcium salt deposition. The dual antibacterial effect from the direct contact killing of QAS and the sustained release of Ag nanoparticles, along with the Ag-promoted osteogenic differentiation, had been verified and utilized in Ag@QHMS. This system demonstrates the potential for utilizing pluripotent biomaterials to treat complex lesions.

In vivo Microbial Diversity Analysis on Different Surfaces of Dental Restorative Materials via 16S rDNA Sequencing

Background

This study aimed to provide precise material selection guidance for proper clinical restoration and treatment of plaque-related oral diseases, such as dental caries and periodontal diseases.

Material/Methods

Four groups (n=24) of restorative material sheets (n=24) were prepared using 3M Z350 composite resin (ZR), zinc phosphate cement (ZPC), glass-ionomer (GI), and ICON permeable resin (IPR). Six volunteers wore a plaque-collection device equipped with the 4 restorative material sheets for 48 hours. Plaque samples were collected, and Miseq sequencing was applied to obtain template DNA fragments for microbial diversity analysis. The data were analyzed with nonparametric tests.

Results

The microbial diversity on the ZPC surface was significantly lower than that on GI and IPR surfaces. The abundance of Firmicutes and Streptococcus on the ZPC surface was significantly higher than on the surfaces of GI and IPR. In contrast, the abundance of Porphyromonas on the surface of ZPC was significantly lower than that on GI and IPR surfaces. (P<0.05).

Conclusions

The results of the present study might serve as a basis for material selection under different oral microbial conditions to provide more accurate treatments and restorative procedures in the oral cavity.

Well-water-dispersed N-trimethyl chitosan/Fe3O4 hybrid nanoparticles as peroxidase mimetics for quick and effective elimination of bacteria

Fe₃O₄ nanoparticles, used as peroxidase mimetics, exhibit splendid future in the biomedical field. However, the functionalization on Fe₃O₄ nanoparticles always goes with the loss of superparamagnetism and decrease in peroxidase-activity. Here, we synthesized green polyethylene glycol (PEG)-functionalized magnetic/N-trimethyl chitosan (CS) hybrid nanoparticles (Fe₃O₄@PAA/TMC/PEG NPs) with improved water dispersibility, superparamagnetism, high saturation magnetization and well peroxidase-like activity. The functionalized coating was divided in two steps, one involved a cross-linked PEG/PAA/CS middle layer to protect the nanocrystal Fe₃O₄ from oxidization, the other was a hydrophilic PEG/TMC outer layer improving the water dispersion, biocompatibility, as well as supplying positive quaternary ammonium groups for a potential increase of cell binding efficiency. The structure, composition and morphology of Fe₃O₄@PAA/TMC/PEG NPs were characterized by TEM, FT-IR spectroscopy, DLS, zeta potential measurement, respectively. Thermal performance was characterized by TGA, and the peroxidase-like mimics activity was tested by TMB·2HCl colour development experiments. The magnetic property of the as-prepared hybrid nanoparticles was first confirmed by VSM, and then proved by the bacterial pathogens adsorption, especially at ultralow pathogen concentration. Particularly, with an external magnet, the Fe₃O₄@PAA/TMC/PEG NPs, combined cationic quaternary ammonium groups and peroxidise-mimetic catalytic activity, were tested for antibacterial effect by plating method.

Considerations and Caveats in Combating ESKAPE Pathogens against Nosocomial Infections

ESKAPE pathogens (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter species) are among the most common opportunistic pathogens in nosocomial infections. ESKAPE pathogens distinguish themselves from normal ones by developing a high level of antibiotic resistance that involves multiple mechanisms. Contemporary therapeutic strategies which are potential options in combating ESKAPE bacteria need further investigation. Herein, a broad overview of the antimicrobial research on ESKAPE pathogens over the past five years is provided with prospective clinical applications.

Fluorescent Imidazolium-Type Poly(ionic liquid)s for Bacterial Imaging and Biofilm Inhibition

Fluorescent imidazolium-type poly(ionic liquid)s (PIL)s were synthesized by anion exchange of bromide (Br^-) in poly(3-butyl-1-vinylimidazolium bromide) (PIL-Br) with a fluorescent anion, namely, 3-(4-(1,2,2-triphenylvinyl)phenoxy)propane-1-sulfonate (TPESO₃^-). Such an anion exchange provided antibacterial PILs with aggregation-induced emission (AIE) properties that simultaneously kill and image bacteria. These fluorescence and antibacterial properties could be regulated by controlling the Br^-/TPESO₃^- ratio. The fluorescence intensity increases as this ratio increases, while the antibacterial property exhibits an opposite trend. Moreover, the AIE-type PILs are useful for fluorescently imaging dead bacteria (macroscopically and microscopically) and could effectively inhibit biofilm growth. This study provided a convenient method to obtain fluorescent PILs with adjustable antibacterial and imaging properties.