1
|
Baptista LS, Mironov V, Koudan E, Amorim ÉA, Pampolha TP, Kasyanov V, Kovalev A, Senatov F, Granjeiro JM. Bioprinting Using Organ Building Blocks: Spheroids, Organoids, and Assembloids. Tissue Eng Part A 2024. [PMID: 38062998 DOI: 10.1089/ten.tea.2023.0198] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/27/2024] Open
Abstract
Three-dimensional (3D) bioprinting, a promising advancement in tissue engineering technology, involves the robotic, layer-by-layer additive biofabrication of functional 3D tissue and organ constructs. This process utilizes biomaterials, typically hydrogels and living cells, following digital models. Traditional tissue engineering uses a classic triad of living cells, scaffolds, and physicochemical signals in bioreactors. A scaffold is a temporary, often biodegradable, support structure. Tissue engineering primarily falls into two categories: (i) scaffold based and (ii) scaffold free. The latter, scaffold-free 3D bioprinting, is gaining increasing popularity. Organ building blocks (OBB), capable of self-assembly and self-organization, such as tissue spheroids, organoids, and assembloids, have begun to be utilized in scaffold-free bioprinting. This article discusses the expanding range of OBB, presents the rapidly evolving collection of bioprinting and bioassembly methods using these OBB, and finally, outlines the advantages, challenges, and future perspectives of using OBB in organ printing.
Collapse
Affiliation(s)
- Leandra Santos Baptista
- Campus Duque de Caxias Prof Geraldo Cidade, Universidade Federal do Rio de Janeiro, Rio de Janeiro, Brazil
- Post-graduation Program in Biotechnology, National Institute of Metrology, Quality, and Technology (Inmetro), Rio de Janeiro, Brazil
- Laboratory of Eukaryotic Cell Biology, National Institute of Metrology, Quality and Technology (Inmetro), Rio de Janeiro, Brazil
| | - Vladimir Mironov
- Campus Duque de Caxias Prof Geraldo Cidade, Universidade Federal do Rio de Janeiro, Rio de Janeiro, Brazil
| | - Elizaveta Koudan
- Center for Biomedical Engineering, National University of Science and Technology "MISIS," Moscow, Russia
| | - Érica Almeida Amorim
- Campus Duque de Caxias Prof Geraldo Cidade, Universidade Federal do Rio de Janeiro, Rio de Janeiro, Brazil
- Gcell 3D, Rio de Janeiro, Brazil
- Precision Medicine Research Center, Carlos Chagas Filho Institute of Biophysics, Federal University of Rio de Janeiro, Rio de Janeiro, Brazil
| | - Tathiana Proença Pampolha
- Post-graduation Program in Biotechnology, National Institute of Metrology, Quality, and Technology (Inmetro), Rio de Janeiro, Brazil
- Laboratory of Eukaryotic Cell Biology, National Institute of Metrology, Quality and Technology (Inmetro), Rio de Janeiro, Brazil
| | - Vladimir Kasyanov
- Joint Laboratory of Traumatology and Orthopaedics, Riga Stradins University, Riga, Latvia
| | - Alexei Kovalev
- Priorov Central National Institute of Traumatology and Orthopedics, Moscow, Russia
| | - Fedor Senatov
- Center for Biomedical Engineering, National University of Science and Technology "MISIS," Moscow, Russia
| | - José Mauro Granjeiro
- Post-graduation Program in Biotechnology, National Institute of Metrology, Quality, and Technology (Inmetro), Rio de Janeiro, Brazil
- Laboratory of Eukaryotic Cell Biology, National Institute of Metrology, Quality and Technology (Inmetro), Rio de Janeiro, Brazil
- Laboratory of Clinical Research in Odontology, Fluminense Federal University (UFF), Niterói, Brazil
| |
Collapse
|
2
|
Saemundsson SA, Ganguly S, Curry SD, Goodwin AP, Cha JN. Controlling Cell Organization in 3D Coculture Spheroids Using DNA Interactions. ACS Biomater Sci Eng 2023. [PMID: 37155244 DOI: 10.1021/acsbiomaterials.3c00546] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/10/2023]
Abstract
The role of stromal and immune cells in transforming the tumor microenvironment is a key consideration in understanding tumor cell behavior and anticancer drug development. To better model these systems in vitro, 3D coculture tumor spheroids have been engineered using a variety of techniques including centrifugation to microwells, hanging drop, low adhesion cultures, and culture of cells in a microfluidic platform. Aside from using bioprinting, however, it has remained more challenging to direct the spatial organization of heterotypic cells in standalone 3D spheroids. To address this, we present an in vitro 3D coculture tumor model where we modulated the interactions between cancer cells and fibroblasts through DNA hybridization. When native heterotypic cells are simply mixed, the cell aggregates typically show cell sorting behavior to form phase separated structures composed of single cell types. In this work, we demonstrate that when MDA-MB-468 breast cancer and NIH/3T3 fibroblasts are directed to associate via complementary DNA, a uniform distribution of the two cell types within a single spheroid was observed. In contrast, in the absence of specific DNA interactions between the cancer cells and fibroblasts, individual clusters of the NIH/3T3 cells formed in each spheroid due to cell sorting. To better understand the effect of heterotypic cell organization on either cell-cell contacts or matrix protein production, the spheroids were further stained with anti-E-cadherin and antifibronectin antibodies. While the amounts of E-cadherin appeared to be similar between the spheroids, a significantly higher amount of fibronectin secretion was observed in the coculture spheroids with uniform mixing of two cell types. This result showed that different heterotypic cell distributions within 3D architecture can influence the ECM protein production that can again alter the properties of the tumor or tumor microenvironment. The present study thus describes the use of DNA templating to direct the organization of cells in coculture spheroids, which can provide mechanistic biological insight into how heterotypic distribution in tumor spheroids can influence tumor progression, metastasis, and drug resistance.
Collapse
Affiliation(s)
- Sven A Saemundsson
- Department of Chemical and Biological Engineering, University of Colorado, Boulder, 596 UCB, Boulder, Colorado 80303, United States
| | - Saheli Ganguly
- Department of Chemical and Biological Engineering, University of Colorado, Boulder, 596 UCB, Boulder, Colorado 80303, United States
| | - Shane D Curry
- Department of Chemical and Biological Engineering, University of Colorado, Boulder, 596 UCB, Boulder, Colorado 80303, United States
| | - Andrew P Goodwin
- Department of Chemical and Biological Engineering, University of Colorado, Boulder, 596 UCB, Boulder, Colorado 80303, United States
- Materials Science and Engineering Program, University of Colorado, Boulder, 596 UCB, Boulder, Colorado 80303, United States
| | - Jennifer N Cha
- Department of Chemical and Biological Engineering, University of Colorado, Boulder, 596 UCB, Boulder, Colorado 80303, United States
- Materials Science and Engineering Program, University of Colorado, Boulder, 596 UCB, Boulder, Colorado 80303, United States
- Biomedical Engineering Program, University of Colorado, Boulder, 596 UCB, Boulder, Colorado 80303, United States
| |
Collapse
|
3
|
Shajib MS, Futrega K, Franco RAG, McKenna E, Guillesser B, Klein TJ, Crawford RW, Doran MR. Method for manufacture and cryopreservation of cartilage microtissues. J Tissue Eng 2023; 14:20417314231176901. [PMID: 37529249 PMCID: PMC10387698 DOI: 10.1177/20417314231176901] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/24/2023] [Accepted: 05/04/2023] [Indexed: 08/03/2023] Open
Abstract
The financial viability of a cell and tissue-engineered therapy may depend on the compatibility of the therapy with mass production and cryopreservation. Herein, we developed a method for the mass production and cryopreservation of 3D cartilage microtissues. Cartilage microtissues were assembled from either 5000 human bone marrow-derived stromal cells (BMSC) or 5000 human articular chondrocytes (ACh) each using a customized microwell platform (the Microwell-mesh). Microtissues rapidly accumulate homogenous cartilage-like extracellular matrix (ECM), making them potentially useful building blocks for cartilage defect repair. Cartilage microtissues were cultured for 5 or 10 days and then cryopreserved in 90% serum plus 10% dimethylsulfoxide (DMSO) or commercial serum-free cryopreservation media. Cell viability was maximized during thawing by incremental dilution of serum to reduce oncotic shock, followed by washing and further culture in serum-free medium. When assessed with live/dead viability dyes, thawed microtissues demonstrated high viability but reduced immediate metabolic activity relative to unfrozen control microtissues. To further assess the functionality of the freeze-thawed microtissues, their capacity to amalgamate into a continuous tissue was assess over a 14 day culture. The amalgamation of microtissues cultured for 5 days was superior to those that had been cultured for 10 days. Critically, the capacity of cryopreserved microtissues to amalgamate into a continuous tissue in a subsequent 14-day culture was not compromised, suggesting that cryopreserved microtissues could amalgamate within a cartilage defect site. The quality ECM was superior when amalgamation was performed in a 2% O2 atmosphere than a 20% O2 atmosphere, suggesting that this process may benefit from the limited oxygen microenvironment within a joint. In summary, cryopreservation of cartilage microtissues is a viable option, and this manipulation can be performed without compromising tissue function.
Collapse
Affiliation(s)
- Md. Shafiullah Shajib
- School of Biomedical Science, Faculty of Health, Queensland University of Technology, Brisbane, QLD, Australia
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
- Translational Research Institute, Brisbane, QLD, Australia
| | - Kathryn Futrega
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
- Translational Research Institute, Brisbane, QLD, Australia
- National Institute of Dental and Craniofacial Research, National Institutes of Health, Department of Health and Human Services, Bethesda, MD, USA
| | - Rose Ann G Franco
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
- Translational Research Institute, Brisbane, QLD, Australia
| | - Eamonn McKenna
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
- Translational Research Institute, Brisbane, QLD, Australia
| | - Bianca Guillesser
- School of Biomedical Science, Faculty of Health, Queensland University of Technology, Brisbane, QLD, Australia
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
- Translational Research Institute, Brisbane, QLD, Australia
| | - Travis J Klein
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
| | - Ross W Crawford
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
| | - Michael R Doran
- School of Biomedical Science, Faculty of Health, Queensland University of Technology, Brisbane, QLD, Australia
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
- Translational Research Institute, Brisbane, QLD, Australia
- National Institute of Dental and Craniofacial Research, National Institutes of Health, Department of Health and Human Services, Bethesda, MD, USA
- Mater Research Institute – University of Queensland, Brisbane, QLD, Australia
| |
Collapse
|
4
|
Strategies to capitalize on cell spheroid therapeutic potential for tissue repair and disease modeling. NPJ Regen Med 2022; 7:70. [PMID: 36494368 PMCID: PMC9734656 DOI: 10.1038/s41536-022-00266-z] [Citation(s) in RCA: 18] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/10/2022] [Accepted: 11/29/2022] [Indexed: 12/13/2022] Open
Abstract
Cell therapies offer a tailorable, personalized treatment for use in tissue engineering to address defects arising from trauma, inefficient wound repair, or congenital malformation. However, most cell therapies have achieved limited success to date. Typically injected in solution as monodispersed cells, transplanted cells exhibit rapid cell death or insufficient retention at the site, thereby limiting their intended effects to only a few days. Spheroids, which are dense, three-dimensional (3D) aggregates of cells, enhance the beneficial effects of cell therapies by increasing and prolonging cell-cell and cell-matrix signaling. The use of spheroids is currently under investigation for many cell types. Among cells under evaluation, spheroids formed of mesenchymal stromal cells (MSCs) are particularly promising. MSC spheroids not only exhibit increased cell survival and retained differentiation, but they also secrete a potent secretome that promotes angiogenesis, reduces inflammation, and attracts endogenous host cells to promote tissue regeneration and repair. However, the clinical translation of spheroids has lagged behind promising preclinical outcomes due to hurdles in their formation, instruction, and use that have yet to be overcome. This review will describe the current state of preclinical spheroid research and highlight two key examples of spheroid use in clinically relevant disease modeling. It will highlight techniques used to instruct the phenotype and function of spheroids, describe current limitations to their use, and offer suggestions for the effective translation of cell spheroids for therapeutic treatments.
Collapse
|
5
|
Vascularization Strategies in 3D Cell Culture Models: From Scaffold-Free Models to 3D Bioprinting. Int J Mol Sci 2022; 23:ijms232314582. [PMID: 36498908 PMCID: PMC9737506 DOI: 10.3390/ijms232314582] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/27/2022] [Revised: 11/21/2022] [Accepted: 11/21/2022] [Indexed: 11/24/2022] Open
Abstract
The discrepancies between the findings in preclinical studies, and in vivo testing and clinical trials have resulted in the gradual decline in drug approval rates over the past decades. Conventional in vitro drug screening platforms employ two-dimensional (2D) cell culture models, which demonstrate inaccurate drug responses by failing to capture the three-dimensional (3D) tissue microenvironment in vivo. Recent advancements in the field of tissue engineering have made possible the creation of 3D cell culture systems that can accurately recapitulate the cell-cell and cell-extracellular matrix interactions, as well as replicate the intricate microarchitectures observed in native tissues. However, the lack of a perfusion system in 3D cell cultures hinders the establishment of the models as potential drug screening platforms. Over the years, multiple techniques have successfully demonstrated vascularization in 3D cell cultures, simulating in vivo-like drug interactions, proposing the use of 3D systems as drug screening platforms to eliminate the deviations between preclinical and in vivo testing. In this review, the basic principles of 3D cell culture systems are briefly introduced, and current research demonstrating the development of vascularization in 3D cell cultures is discussed, with a particular focus on the potential of these models as the future of drug screening platforms.
Collapse
|
6
|
A dopamine-methacrylated hyaluronic acid hydrogel as an effective carrier for stem cells in skin regeneration therapy. Cell Death Dis 2022; 13:738. [PMID: 36030275 PMCID: PMC9420120 DOI: 10.1038/s41419-022-05060-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/06/2022] [Revised: 05/05/2022] [Accepted: 07/01/2022] [Indexed: 01/21/2023]
Abstract
Adipose-derived stem cells (ADSCs) show potential in skin regeneration research. A previous study reported the failure of full-thickness skin self-repair in an injury area exceeding 4 cm in diameter. Stem cell therapies have shown promise in accelerating skin regeneration; however, the low survival rate of transplanted cells due to the lack of protection during and after transplantation leads to low efficacy. Hence, effective biomaterials for the delivery and retention of ADSCs are urgently needed for skin regeneration purposes. Here, we covalently crosslinked hyaluronic acid with methacrylic anhydride and then covalently crosslinked the product with dopamine to engineer dopamine-methacrylated hyaluronic acid (DA-MeHA). Our experiments suggested that the DA-MeHA hydrogel firmly adhered to the skin wound defect and promoted cell proliferation in vitro and skin defect regeneration in vivo. Mechanistic analyses revealed that the beneficial effect of the DA-MeHA hydrogel combined with ADSCs on skin defect repair may be closely related to the Notch signaling pathway. The ADSCs from the DA-MeHA hydrogel secrete high levels of growth factors and are thus highly efficacious for promoting skin wound healing. This DA-MeHA hydrogel may be used as an effective potential carrier for stem cells as it enhances the efficacy of ADSCs in skin regeneration.
Collapse
|
7
|
Yuan SM, Yang XT, Zhang SY, Tian WD, Yang B. Therapeutic potential of dental pulp stem cells and their derivatives: Insights from basic research toward clinical applications. World J Stem Cells 2022; 14:435-452. [PMID: 36157522 PMCID: PMC9350620 DOI: 10.4252/wjsc.v14.i7.435] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 03/14/2022] [Revised: 05/25/2022] [Accepted: 06/20/2022] [Indexed: 02/06/2023] Open
Abstract
For more than 20 years, researchers have isolated and identified postnatal dental pulp stem cells (DPSCs) from different teeth, including natal teeth, exfoliated deciduous teeth, healthy teeth, and diseased teeth. Their mesenchymal stem cell (MSC)-like immunophenotypic characteristics, high proliferation rate, potential for multidirectional differentiation and biological features were demonstrated to be superior to those of bone marrow MSCs. In addition, several main application forms of DPSCs and their derivatives have been investigated, including stem cell injections, modified stem cells, stem cell sheets and stem cell spheroids. In vitro and in vivo administration of DPSCs and their derivatives exhibited beneficial effects in various disease models of different tissues and organs. Therefore, DPSCs and their derivatives are regarded as excellent candidates for stem cell-based tissue regeneration. In this review, we aim to provide an overview of the potential application of DPSCs and their derivatives in the field of regenerative medicine. We describe the similarities and differences of DPSCs isolated from donors of different ages and health conditions. The methodologies for therapeutic administration of DPSCs and their derivatives are introduced, including single injections and the transplantation of the cells with a support, as cell sheets, or as cell spheroids. We also summarize the underlying mechanisms of the regenerative potential of DPSCs.
Collapse
Affiliation(s)
- Sheng-Meng Yuan
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, Engineering Research Center of Oral Translational Medicine, National Engineering Laboratory for Oral Regenerative Medicine, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, Sichuan Province, China
- Department of Oral and Maxillofacial Surgery, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, Sichuan Province, China
| | - Xue-Ting Yang
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, Engineering Research Center of Oral Translational Medicine, National Engineering Laboratory for Oral Regenerative Medicine, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, Sichuan Province, China
- Department of Oral and Maxillofacial Surgery, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, Sichuan Province, China
| | - Si-Yuan Zhang
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, Engineering Research Center of Oral Translational Medicine, National Engineering Laboratory for Oral Regenerative Medicine, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, Sichuan Province, China
| | - Wei-Dong Tian
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, Engineering Research Center of Oral Translational Medicine, National Engineering Laboratory for Oral Regenerative Medicine, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, Sichuan Province, China
- Department of Oral and Maxillofacial Surgery, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, Sichuan Province, China
| | - Bo Yang
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, Engineering Research Center of Oral Translational Medicine, National Engineering Laboratory for Oral Regenerative Medicine, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, Sichuan Province, China
- Department of Oral and Maxillofacial Surgery, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, Sichuan Province, China
| |
Collapse
|
8
|
Wolf KJ, Weiss JD, Uzel SGM, Skylar-Scott MA, Lewis JA. Biomanufacturing human tissues via organ building blocks. Cell Stem Cell 2022; 29:667-677. [PMID: 35523137 PMCID: PMC9617289 DOI: 10.1016/j.stem.2022.04.012] [Citation(s) in RCA: 23] [Impact Index Per Article: 11.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
Abstract
The construction of human organs on demand remains a tantalizing vision to solve the organ donor shortage. Yet, engineering tissues that recapitulate the cellular and architectural complexity of native organs is a grand challenge. The use of organ building blocks (OBBs) composed of multicellular spheroids, organoids, and assembloids offers an important pathway for creating organ-specific tissues with the desired cellular-to-tissue-level organization. Here, we review the differentiation, maturation, and 3D assembly of OBBs into functional human tissues and, ultimately, organs for therapeutic repair and replacement. We also highlight future challenges and areas of opportunity for this nascent field.
Collapse
Affiliation(s)
- Kayla J Wolf
- Wyss Institute for Biologically Inspired Engineering & John A. Paulson School of Engineering and Applied Sciences, Harvard University, 29 Oxford Street, Cambridge, MA 02138, USA
| | - Jonathan D Weiss
- Department of Bioengineering, Stanford University, 240 Pasteur Drive, Stanford, CA 94304, USA
| | - Sebastien G M Uzel
- Wyss Institute for Biologically Inspired Engineering & John A. Paulson School of Engineering and Applied Sciences, Harvard University, 29 Oxford Street, Cambridge, MA 02138, USA
| | - Mark A Skylar-Scott
- Department of Bioengineering, Stanford University, 240 Pasteur Drive, Stanford, CA 94304, USA; BASE Initiative, Betty Irene Moore Children's Heart Center, Lucile Packard Children's Hospital, Stanford University School of Medicine, Stanford, CA 94304, USA.
| | - Jennifer A Lewis
- Wyss Institute for Biologically Inspired Engineering & John A. Paulson School of Engineering and Applied Sciences, Harvard University, 29 Oxford Street, Cambridge, MA 02138, USA.
| |
Collapse
|
9
|
Stengelin E, Thiele J, Seiffert S. Multiparametric Material Functionality of Microtissue-Based In Vitro Models as Alternatives to Animal Testing. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2105319. [PMID: 35043598 PMCID: PMC8981905 DOI: 10.1002/advs.202105319] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/30/2021] [Indexed: 05/12/2023]
Abstract
With the definition of the 3R principle by Russel and Burch in 1959, the search for an adequate substitute for animal testing has become one of the most important tasks and challenges of this time, not only from an ethical, but also from a scientific, economic, and legal point of view. Microtissue-based in vitro model systems offer a valuable approach to address this issue by accounting for the complexity of natural tissues in a simplified manner. To increase the functionality of these model systems and thus make their use as a substitute for animal testing more likely in the future, the fundamentals need to be continuously improved. Corresponding requirements exist in the development of multifunctional, hydrogel-based materials, whose properties are considered in this review under the aspects of processability, adaptivity, biocompatibility, and stability/degradability.
Collapse
Affiliation(s)
- Elena Stengelin
- Department of ChemistryJohannes Gutenberg‐University MainzD‐55128MainzGermany
| | - Julian Thiele
- Leibniz‐Institut für Polymerforschung Dresden e.V.Hohe Straße 6D‐01069DresdenGermany
| | - Sebastian Seiffert
- Department of ChemistryJohannes Gutenberg‐University MainzD‐55128MainzGermany
| |
Collapse
|
10
|
Wang A, Madden LA, Paunov VN. Fabrication of Angiogenic Sprouting Coculture of Cell Clusteroids Using an Aqueous Two-Phase Pickering Emulsion System. ACS APPLIED BIO MATERIALS 2022; 5:1804-1816. [PMID: 35315278 DOI: 10.1021/acsabm.2c00168] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Tumor cell spheroids and 3D cell culture have generated a lot of interest in the past decade due to their relative ease of production and biomedical research applications. To date, the frontier in tumor 3D models has been pushed to the level of personalized cancer treatment and customized tissue engineering applications. However, without vascularization, the central parts of these artificial constructs cannot survive without an adequate oxygen and nutrient supply. The formation of a necrotic core into in vitro 3D cell models still serves as the major obstacle in their wider practical application. Here, we propose a rapid formation protocol based on using a water-in-water (w/w) Pickering emulsion template to generate phenotypically endothelial/hepatic (ECV304/Hep-G2) coculture cell clusteroids with angiogenic capability. The w/w Pickering emulsion template was based on a dextran/poly(ethylene oxide) aqueous two-phase system stabilized by whey protein particles. The initial cell proportion in the coculture clusteroids can easily be manipulated for optimal performance. The cocultured pattern of the endothelial/hepatic cells could significantly promote the production of angiogenesis-related proteins. Our study confirmed that cocultured clusteroids can stimulate cell sprouting without the addition of vascular endothelial growth factor (VEGF) or other angiogenesis inducers at a 1:2 ratio of Hep-G2/ECV304. Angiogenesis gene production in the coculture clusteroids was enhanced with VEGF, urea, and insulin-like growth factor-binding protein along with angiogenesis-related marker CD34 levels, also indicating angiogenesis progress. Our aqueous two-phase Pickering emulsion templates provided a convenient approach to vascularize a target cell type in 3D cell coculture without additional stimulating factors, which could potentially apply to either cell lines or biopsy tissues, expanding the clusteroids downstream applications.
Collapse
Affiliation(s)
- Anheng Wang
- Department of Chemistry and Biochemistry, University of Hull, Hull HU67RX, United Kingdom
| | - Leigh A Madden
- Department of Biomedical Sciences, University of Hull, Hull HU67RX, United Kingdom
| | - Vesselin N Paunov
- Department of Chemistry, Nazarbayev University, 53 Kabanbay Batyr Avenue, Nursultan 010000, Kazakhstan
| |
Collapse
|
11
|
Kim EM, Lee GM, Lee S, Kim SJ, Lee D, Yoon DS, Joo J, Kong H, Park HH, Shin H. Effects of mechanical properties of gelatin methacryloyl hydrogels on encapsulated stem cell spheroids for 3D tissue engineering. Int J Biol Macromol 2022; 194:903-913. [PMID: 34838857 DOI: 10.1016/j.ijbiomac.2021.11.145] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/17/2021] [Revised: 11/18/2021] [Accepted: 11/22/2021] [Indexed: 01/22/2023]
Abstract
Cell spheroids are three-dimensional cell aggregates that have been widely employed in tissue engineering. Spheroid encapsulation has been explored as a method to enhance cell-cell interactions. However, the effect of hydrogel mechanical properties on spheroids, specifically soft hydrogels (<1 kPa), has not yet been studied. In this study, we determined the effect of encapsulation of stem cell spheroids by hydrogels crosslinked with different concentrations of gelatin methacryloyl (GelMA) on the functions of the stem cells. To this end, human adipose-derived stem cell (ADSC) spheroids with a defined size were prepared, and spheroid-laden hydrogels with various concentrations (5, 10, 15%) were fabricated. The apoptotic index of cells from spheroids encapsulated in the 15% hydrogel was high. The migration distance was five-fold higher in cells encapsulated in the 5% hydrogel than the 10% hydrogel. After 14 days of culture, cells from spheroids in the 5% hydrogel were observed to have spread and proliferated. Osteogenic factor and pro-angiogenic factor production in the 15% hydrogel was high. Collectively, our results indicate that the functionality of spheroids can be regulated by the mechanical properties of hydrogel, even under 1 kPa. These results indicate that spheroid-laden hydrogels are suitable for use in 3D tissue construction.
Collapse
Affiliation(s)
- Eun Mi Kim
- Department of Bioengineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea
| | - Gyeong Min Lee
- Department of Bioengineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea; BK21 FOUR Education and Research Group for Biopharmaceutical Innovation Leader, Department of Bioengineering, College of Engineering, Hanyang University, Republic of Korea
| | - Sangmin Lee
- Department of Bioengineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea; BK21 FOUR Education and Research Group for Biopharmaceutical Innovation Leader, Department of Bioengineering, College of Engineering, Hanyang University, Republic of Korea
| | - Se-Jeong Kim
- Department of Bioengineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea; BK21 FOUR Education and Research Group for Biopharmaceutical Innovation Leader, Department of Bioengineering, College of Engineering, Hanyang University, Republic of Korea
| | - Dongtak Lee
- School of Biomedical Engineering, Korea University, Seoul 20841, Republic of Korea
| | - Dae Sung Yoon
- School of Biomedical Engineering, Korea University, Seoul 20841, Republic of Korea
| | - Jinmyoung Joo
- Department of Biomedical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea
| | - Hyunjoon Kong
- Department of Chemical and Biomolecular engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801, United States
| | - Hee Ho Park
- Department of Bioengineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea.
| | - Heungsoo Shin
- Department of Bioengineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea; BK21 FOUR Education and Research Group for Biopharmaceutical Innovation Leader, Department of Bioengineering, College of Engineering, Hanyang University, Republic of Korea; Institute of Nano Science and Technology, Hanyang University, 222 Wangsimri-ro, Seongdong-gu, Seoul 04763, Republic of Korea.
| |
Collapse
|
12
|
Chen S, Ikemoto T, Tokunaga T, Okikawa S, Miyazaki K, Yamada S, Saito Y, Morine Y, Shimada M. Newly Generated 3D Schwann-Like Cell Spheroids From Human Adipose-Derived Stem Cells Using a Modified Protocol. Cell Transplant 2022; 31:9636897221093312. [PMID: 35469470 PMCID: PMC9087224 DOI: 10.1177/09636897221093312] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/15/2022] [Revised: 03/11/2022] [Accepted: 03/23/2022] [Indexed: 11/16/2022] Open
Abstract
Peripheral nerve injury (PNI) is a relatively frequent type of trauma that results in the suffering of many patients worldwide every year. Schwann cells (SCs) are expected to be applied in cell therapy because of their ability to promote peripheral nerve regeneration. However, the lack of clinically renewable sources of SCs hinders the application of SC-based therapies. Adipose-derived stem cells (ADSCs) have generated great interest in recent years because of their multipotency and ease of harvest, and they have already been verified to differentiate into Schwann-like cells (SLCs) in vitro. However, the efficiency of differentiation and the functions of SLCs remain unsatisfactory. We newly generated three-dimensional (3D) SLC spheroids from ADSCs using a modified protocol with human recombinant peptide (RCP) petaloid μ-piece. Morphological analysis, gene expression analysis by qRT-PCR, ELISA measurement of the secretion capabilities of neurotrophic factors, and neurite formation assay were performed to evaluate the functions of these 3D SLCs in vitro. Motor function recovery was measured in a sciatic nerve injury mouse model to analyze the nerve regeneration-promoting effect of 3D SLCs in vivo. The differentiation efficiency and the secretion of neurotrophic factors were enhanced in 3D SLCs compared with conventional SLCs. 3D SLCs could more effectively promote neurite growth and longer neurite extension in a neuron-like SH-SY5Y model. Additionally, 3D SLCs had a better therapeutic effect on nerve regeneration after transplantation into the sciatic nerve injury mouse model. These findings demonstrated that the potential of ADSC-derived SLCs to promote nerve regeneration could be significantly increased using our modified differentiation protocol and by assembling cells into a 3D sphere conformation. Therefore, these cells have great potential and can be used in the clinical treatment of PNI.
Collapse
Affiliation(s)
- Shuhai Chen
- Department of Digestive and
Transplant Surgery, Tokushima University, Tokushima, Japan
| | - Tetsuya Ikemoto
- Department of Digestive and
Transplant Surgery, Tokushima University, Tokushima, Japan
| | - Takuya Tokunaga
- Department of Digestive and
Transplant Surgery, Tokushima University, Tokushima, Japan
| | - Shouhei Okikawa
- Department of Digestive and
Transplant Surgery, Tokushima University, Tokushima, Japan
| | - Katsuki Miyazaki
- Department of Digestive and
Transplant Surgery, Tokushima University, Tokushima, Japan
| | - Shinichiro Yamada
- Department of Digestive and
Transplant Surgery, Tokushima University, Tokushima, Japan
| | - Yu Saito
- Department of Digestive and
Transplant Surgery, Tokushima University, Tokushima, Japan
| | - Yuji Morine
- Department of Digestive and
Transplant Surgery, Tokushima University, Tokushima, Japan
| | - Mitsuo Shimada
- Department of Digestive and
Transplant Surgery, Tokushima University, Tokushima, Japan
| |
Collapse
|
13
|
Muthusamy S, Kannan S, Lee M, Sanjairaj V, Lu WF, Fuh JYH, Sriram G, Cao T. 3D bioprinting and microscale organization of vascularized tissue constructs using collagen-based bioink. Biotechnol Bioeng 2021; 118:3150-3163. [PMID: 34037982 DOI: 10.1002/bit.27838] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/30/2020] [Revised: 04/19/2021] [Accepted: 05/18/2021] [Indexed: 12/29/2022]
Abstract
Bioprinting three-dimensional (3D) tissue equivalents have progressed tremendously over the last decade. 3D bioprinting is currently being employed to develop larger and more physiologic tissues, and it is of particular interest to generate vasculature in biofabricated tissues to aid better perfusion and transport of nutrition. Having an advantage over manual culture systems by bringing together biological scaffold materials and cells in precise 3D spatial orientation, bioprinting could assist in placing endothelial cells in specific spatial locations within a 3D matrix to promote vessel formation at these predefined areas. Hence, in the present study, we investigated the use of bioprinting to generate tissue-level capillary-like networks in biofabricated tissue constructs. First, we developed a bioink using collagen type-1 supplemented with xanthan gum (XG) as a thickening agent. Using a commercial extrusion-based multi-head bioprinter and collagen-XG bioink, the component cells were spatially assembled, wherein the endothelial cells were bioprinted in a lattice pattern and sandwiched between bioprinted fibroblasts layers. 3D bioprinted constructs thus generated were stable, and maintained structural shape and form. Post-print culture of the bioprinted tissues resulted in endothelial sprouting and formation of interconnected capillary-like networks within the lattice pattern and between the fibroblast layers. Bioprinter-assisted spatial placement of endothelial cells resulted in fabrication of patterned prevascularized constructs that enable potential regenerative applications in the future.
Collapse
Affiliation(s)
| | - Sathya Kannan
- Faculty of Dentistry, National University of Singapore, Singapore
| | - Marcus Lee
- Faculty of Dentistry, National University of Singapore, Singapore
| | - Vijayavenkataraman Sanjairaj
- Division of Engineering, New York University Abu Dhabi, Abu Dhabi, United Arab Emirates.,Department of Mechanical Engineering, Tandon School of Engineering, New York University, New York, New York, USA
| | - Wen Feng Lu
- Department of Mechanical Engineering, National University of Singapore, Singapore.,NUS Centre for Additive Manufacturing (AM.NUS), National University of Singapore, Singapore
| | - Jerry Y H Fuh
- Department of Mechanical Engineering, National University of Singapore, Singapore.,NUS Centre for Additive Manufacturing (AM.NUS), National University of Singapore, Singapore
| | - Gopu Sriram
- Faculty of Dentistry, National University of Singapore, Singapore.,NUS Centre for Additive Manufacturing (AM.NUS), National University of Singapore, Singapore
| | - Tong Cao
- Faculty of Dentistry, National University of Singapore, Singapore
| |
Collapse
|
14
|
Zhang J, Xu W, Li C, Meng F, Guan Y, Liu X, Zhao J, Peng J, Wang Y. Tissue Engineering Microtissue: Construction, Optimization, and Application. TISSUE ENGINEERING PART B-REVIEWS 2021; 28:393-404. [PMID: 33719547 DOI: 10.1089/ten.teb.2020.0370] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
Abstract
Until now, there is no clear definition of microtissue; it usually refers to the microtissue formed by the aggregation of seed cells under the action of cell-cell or cell-extracellular matrix (ECM). Compared with traditional cell monolayer culture, cells are cultivated into a three-dimensional microstructure in a specific way. The microstructure characteristics of microtissue are similar to natural tissues and can promote cell proliferation and differentiation. Therefore, it has a broader range of biomedical applications in tissue engineering. The traditional tissue engineering strategy is to add high-density seed cells and biomolecules on a preformed scaffold to construct a tissue engineering graft. However, due to the destruction of the ECM of the cells cultured in a monolayer during the digestion process with trypsin, the uneven distribution of the cells in the scaffold, and the damage of various adverse factors after the cells are implanted in the scaffold, this strategy is often ineffective, and the subsequent applications still face challenges. This article reviews the latest researches of a new strategy-tissue engineering microtissue strategy; discuss several traditional construction methods, structure, and function optimization; and practical application of microtissue. The review aims to provide a reference for future research on tissue engineering microtissue. Impact statement The traditional tissue engineering strategies have several disadvantages, researchers have conducted extensive research on tissue engineering microtissues in recent years, and they make significant progress. Microtissue is a kind of microtissue with three-dimensional structure, its microstructure is similar to that of natural tissue. In addition, microtissue implantation can protect cells from mechanical interference, inflammation, and other adverse factors. Furthermore, it improves the survival rate of cells and the therapeutic effect of tissue-engineered grafts. However, the practical conditions, advantages, and disadvantages of tissue engineering microtissue have not been fully elucidated. The purpose of this review is to discuss the latest research progress of microtissue and provide a reference for future research.
Collapse
Affiliation(s)
- Jian Zhang
- Beijing Key Lab of Regenerative Medicine in Orthopedics, Key Laboratory of Musculoskeletal Trauma and War Injuries PLA, Institute of Orthopedics, Chinese PLA General Hospital, Beijing, P.R. China
| | - Wenjing Xu
- Beijing Key Lab of Regenerative Medicine in Orthopedics, Key Laboratory of Musculoskeletal Trauma and War Injuries PLA, Institute of Orthopedics, Chinese PLA General Hospital, Beijing, P.R. China
| | - Chaochao Li
- Beijing Key Lab of Regenerative Medicine in Orthopedics, Key Laboratory of Musculoskeletal Trauma and War Injuries PLA, Institute of Orthopedics, Chinese PLA General Hospital, Beijing, P.R. China
| | - Fanqi Meng
- Beijing Key Lab of Regenerative Medicine in Orthopedics, Key Laboratory of Musculoskeletal Trauma and War Injuries PLA, Institute of Orthopedics, Chinese PLA General Hospital, Beijing, P.R. China.,Department of Spine Surgery, Peking University People's Hospital, Beijing, P.R. China
| | - Yanjun Guan
- Beijing Key Lab of Regenerative Medicine in Orthopedics, Key Laboratory of Musculoskeletal Trauma and War Injuries PLA, Institute of Orthopedics, Chinese PLA General Hospital, Beijing, P.R. China
| | - Xiuzhi Liu
- Beijing Key Lab of Regenerative Medicine in Orthopedics, Key Laboratory of Musculoskeletal Trauma and War Injuries PLA, Institute of Orthopedics, Chinese PLA General Hospital, Beijing, P.R. China
| | - Jie Zhao
- Beijing Tsinghua Changgeng Hospital Affiliated to Tsinghua University, Tsinghua University Clinical School, Beijing, P.R. China
| | - Jiang Peng
- Beijing Key Lab of Regenerative Medicine in Orthopedics, Key Laboratory of Musculoskeletal Trauma and War Injuries PLA, Institute of Orthopedics, Chinese PLA General Hospital, Beijing, P.R. China.,Co-Innovation Center of Neuroregeneration, Nantong University, Nantong, P.R. China
| | - Yu Wang
- Beijing Key Lab of Regenerative Medicine in Orthopedics, Key Laboratory of Musculoskeletal Trauma and War Injuries PLA, Institute of Orthopedics, Chinese PLA General Hospital, Beijing, P.R. China.,Co-Innovation Center of Neuroregeneration, Nantong University, Nantong, P.R. China
| |
Collapse
|
15
|
Yang W, Chen L, Jhuang Y, Lin Y, Hung P, Ko Y, Tsai M, Lee Y, Hsu L, Yeh C, Hsu H, Huang C. Injection of hybrid 3D spheroids composed of podocytes, mesenchymal stem cells, and vascular endothelial cells into the renal cortex improves kidney function and replenishes glomerular podocytes. Bioeng Transl Med 2021; 6:e10212. [PMID: 34027096 PMCID: PMC8126810 DOI: 10.1002/btm2.10212] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/17/2020] [Revised: 01/07/2021] [Accepted: 01/11/2021] [Indexed: 12/12/2022] Open
Abstract
Podocytes are highly differentiated epithelial cells that are crucial for maintaining the glomerular filtration barrier in the kidney. Podocyte injury followed by depletion is the major cause of pathological progression of kidney diseases. Although cell therapy has been considered a promising alternative approach to kidney transplantation for the treatment of kidney injury, the resultant therapeutic efficacy in terms of improved renal function is limited, possibly owing to significant loss of engrafted cells. Herein, hybrid three-dimensional (3D) cell spheroids composed of podocytes, mesenchymal stem cells, and vascular endothelial cells were designed to mimic the glomerular microenvironment and as a cell delivery vehicle to replenish the podocyte population by cell transplantation. After creating a native glomerulus-like condition, the expression of multiple genes encoding growth factors and basement membrane factors that are strongly associated with podocyte maturation and functionality was significantly enhanced. Our in vivo results demonstrated that intrarenal transplantation of podocytes in the form of hybrid 3D cell spheroids improved engraftment efficiency and replenished glomerular podocytes. Moreover, the proteinuria of the experimental mice with hypertensive nephropathy was effectively reduced. These data clearly demonstrated the potential of hybrid 3D cell spheroids for repairing injured kidneys.
Collapse
Affiliation(s)
- Wen‐Yu Yang
- Institute of Biomedical EngineeringNational Tsing Hua UniversityHsinchuTaiwan
- Department of Biomedical Engineering and Environmental ScienceNational Tsing Hua UniversityHsinchuTaiwan
| | - Li‐Chi Chen
- Institute of Biomedical EngineeringNational Tsing Hua UniversityHsinchuTaiwan
| | - Ya‐Ting Jhuang
- Kidney Research Center, Department of NephrologyLinkou Chang Gung Memorial HospitalTaoyuanTaiwan
| | - Yu‐Jie Lin
- Institute of Biomedical EngineeringNational Tsing Hua UniversityHsinchuTaiwan
| | - Pei‐Yu Hung
- Kidney Research Center, Department of NephrologyLinkou Chang Gung Memorial HospitalTaoyuanTaiwan
| | - Yi‐Ching Ko
- Kidney Research Center, Department of NephrologyLinkou Chang Gung Memorial HospitalTaoyuanTaiwan
| | - Meng‐Yu Tsai
- Institute of Biomedical EngineeringNational Tsing Hua UniversityHsinchuTaiwan
| | - Yun‐Wei Lee
- Institute of Biomedical EngineeringNational Tsing Hua UniversityHsinchuTaiwan
| | - Li‐Wen Hsu
- Bioresource Collection and Research CenterFood Industry Research and Development InstituteHsinchuTaiwan
| | - Chih‐Kuang Yeh
- Department of Biomedical Engineering and Environmental ScienceNational Tsing Hua UniversityHsinchuTaiwan
| | - Hsiang‐Hao Hsu
- Kidney Research Center, Department of NephrologyLinkou Chang Gung Memorial HospitalTaoyuanTaiwan
- College of Medicine, School of MedicineChang Gung UniversityTaoyuanTaiwan
| | - Chieh‐Cheng Huang
- Institute of Biomedical EngineeringNational Tsing Hua UniversityHsinchuTaiwan
| |
Collapse
|
16
|
Olofsson K, Carannante V, Takai M, Önfelt B, Wiklund M. Ultrasound-Based Scaffold-Free Core-Shell Multicellular Tumor Spheroid Formation. MICROMACHINES 2021; 12:mi12030329. [PMID: 33804708 PMCID: PMC8003921 DOI: 10.3390/mi12030329] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/02/2021] [Revised: 03/15/2021] [Accepted: 03/18/2021] [Indexed: 12/22/2022]
Abstract
In cancer research and drug screening, multicellular tumor spheroids (MCTSs) are a popular model to bridge the gap between in vitro and in vivo. However, the current techniques to culture mixed co-culture MCTSs do not mimic the structural architecture and cellular spatial distribution in solid tumors. In this study we present an acoustic trapping-based core-shell MCTSs culture method using sequential seeding of the core and shell cells into microwells coated with a protein repellent coating. Scaffold-free core-shell ovarian cancer OVCAR-8 cell line MCTSs were cultured, stained, cleared and confocally imaged on-chip. Image analysis techniques were used to quantify the shell thickness (23.2 ± 1.8 µm) and shell coverage percentage (91.2 ± 2.8%). We also show that the shell thickness was evenly distributed over the MCTS cores with the exception of being slightly thinner close to the microwell bottom. This scaffold-free core-shell MCTSs formation technique and the analysis tools presented herein could be used as an internal migration assay within the MCTS or to form core-shell MCTS co-cultures to study therapy response or the interaction between tumor and stromal cells.
Collapse
Affiliation(s)
- Karl Olofsson
- Department of Applied Physics, Science for Life Laboratory, KTH Royal Institute of Technology, SE-106 91 Stockholm, Sweden; (K.O.); (B.Ö.)
| | - Valentina Carannante
- Department of Microbiology, Tumor and Cell Biology, Science for Life Laboratory, Karolinska Institutet, SE-171 65 Stockholm, Sweden;
| | - Madoka Takai
- Department of Bioengineering, University of Tokyo, 7-3-1 Hongo, Bunkyo-Ku, Tokyo 113-8656, Japan;
| | - Björn Önfelt
- Department of Applied Physics, Science for Life Laboratory, KTH Royal Institute of Technology, SE-106 91 Stockholm, Sweden; (K.O.); (B.Ö.)
- Department of Microbiology, Tumor and Cell Biology, Science for Life Laboratory, Karolinska Institutet, SE-171 65 Stockholm, Sweden;
| | - Martin Wiklund
- Department of Applied Physics, Science for Life Laboratory, KTH Royal Institute of Technology, SE-106 91 Stockholm, Sweden; (K.O.); (B.Ö.)
- Correspondence:
| |
Collapse
|
17
|
Shen H, Cai S, Wu C, Yang W, Yu H, Liu L. Recent Advances in Three-Dimensional Multicellular Spheroid Culture and Future Development. MICROMACHINES 2021; 12:96. [PMID: 33477508 PMCID: PMC7831097 DOI: 10.3390/mi12010096] [Citation(s) in RCA: 28] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/25/2020] [Revised: 01/14/2021] [Accepted: 01/15/2021] [Indexed: 12/22/2022]
Abstract
Three-dimensional multicellular spheroids (MCSs) have received extensive attention in the field of biomedicine due to their ability to simulate the structure and function of tissues in vivo more accurately than traditional in vitro two-dimensional models and to simulate cell-cell and cell extracellular matrix (ECM) interactions. It has become an important in vitro three-dimensional model for tumor research, high-throughput drug screening, tissue engineering, and basic biology research. In the review, we first summarize methods for MCSs generation and their respective advantages and disadvantages and highlight the advances of hydrogel and microfluidic systems in the generation of spheroids. Then, we look at the application of MCSs in cancer research and other aspects. Finally, we discuss the development direction and prospects of MCSs.
Collapse
Affiliation(s)
- Honglin Shen
- School of Electromechanical and Automotive Engineering, Yantai University, Yantai 264005, China; (H.S.); (S.C.); (C.W.)
| | - Shuxiang Cai
- School of Electromechanical and Automotive Engineering, Yantai University, Yantai 264005, China; (H.S.); (S.C.); (C.W.)
| | - Chuanxiang Wu
- School of Electromechanical and Automotive Engineering, Yantai University, Yantai 264005, China; (H.S.); (S.C.); (C.W.)
| | - Wenguang Yang
- School of Electromechanical and Automotive Engineering, Yantai University, Yantai 264005, China; (H.S.); (S.C.); (C.W.)
| | - Haibo Yu
- State Key Laboratory of Robotics, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China; (H.Y.); (L.L.)
| | - Lianqing Liu
- State Key Laboratory of Robotics, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China; (H.Y.); (L.L.)
| |
Collapse
|
18
|
Agrawal G, Ramesh A, Aishwarya P, Sally J, Ravi M. Devices and techniques used to obtain and analyze three-dimensional cell cultures. Biotechnol Prog 2021; 37:e3126. [PMID: 33460298 DOI: 10.1002/btpr.3126] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2020] [Revised: 01/07/2021] [Accepted: 01/11/2021] [Indexed: 12/16/2022]
Abstract
Cell cultures are indispensable for both basic and applied research. Advancements in cell culture and analysis increase their utility for basic research and translational applications. A marked development in this direction is advent of three-dimensional (3D) cultures. The extent of advancement in 3D cell culture methods over the past decade has warranted referring to a single cell type being cultured as an aggregate or spheroid using simple scaffolds as "traditional." In recent years, the development of "next-generation" devices has enabled cultured cells to mimic their natural environments much better than the traditional 3D culture systems. Automated platforms like chip-based devices, magnetic- and acoustics-based assembly devices, di-electrophoresis (DEP), micro pocket cultures (MPoC), and 3D bio-printing provide a dynamic environment compared to the rather static conditions of the traditional simple scaffold-based 3D cultures. Chip-based technologies, which are centered on principles of microfluidics, are revolutionizing the ways in which cell culture and analysis can be compacted into table-top instruments. A parallel evolution in analytical devices enabled efficient assessment of various complex physiological and pathological endpoints. This is augmented by concurrent development of software enabling rapid large-scale automated data acquisition and analysis like image cytometry, elastography, optical coherence tomography, surface-enhanced Raman scattering (SERS), and biosensors. The techniques and devices utilized for the purpose of 3D cell culture and subsequent analysis depend primarily on the requirement of the study. We present here an in-depth account of the devices for obtaining and analyzing 3D cell cultures.
Collapse
Affiliation(s)
- Gatika Agrawal
- Department of Human Genetics, Faculty of Biomedical Science, Sri Ramachandra Institute of Higher Education and Research, Chennai, India
| | - Anuradha Ramesh
- Department of Human Genetics, Faculty of Biomedical Science, Sri Ramachandra Institute of Higher Education and Research, Chennai, India
| | - Pargaonkar Aishwarya
- Department of Human Genetics, Faculty of Biomedical Science, Sri Ramachandra Institute of Higher Education and Research, Chennai, India
| | - Jennifer Sally
- Department of Human Genetics, Faculty of Biomedical Science, Sri Ramachandra Institute of Higher Education and Research, Chennai, India
| | - Maddaly Ravi
- Department of Human Genetics, Faculty of Biomedical Science, Sri Ramachandra Institute of Higher Education and Research, Chennai, India
| |
Collapse
|
19
|
Lin YJ, Lee YW, Chang CW, Huang CC. 3D Spheroids of Umbilical Cord Blood MSC-Derived Schwann Cells Promote Peripheral Nerve Regeneration. Front Cell Dev Biol 2020; 8:604946. [PMID: 33392194 PMCID: PMC7773632 DOI: 10.3389/fcell.2020.604946] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/10/2020] [Accepted: 11/30/2020] [Indexed: 12/14/2022] Open
Abstract
Schwann cells (SCs) are promising candidates for cell therapy due to their ability to promote peripheral nerve regeneration. However, SC-based therapies are hindered by the lack of a clinically renewable source of SCs. In this study, using a well-defined non-genetic approach, umbilical cord blood mesenchymal stem cells (cbMSCs), a clinically applicable cell type, were phenotypically, epigenetically, and functionally converted into SC-like cells (SCLCs) that stimulated effective sprouting of neuritic processes from neuronal cells. To further enhance their therapeutic capability, the cbMSC-derived SCLCs were assembled into three-dimensional (3D) cell spheroids by using a methylcellulose hydrogel system. The cell-cell and cell-extracellular matrix interactions were well-preserved within the formed 3D SCLC spheroids, and marked increases in neurotrophic, proangiogenic and anti-apoptotic factors were detected compared with cells that were harvested using conventional trypsin-based methods, demonstrating the superior advantage of SCLCs assembled into 3D spheroids. Transplantation of 3D SCLC spheroids into crush-injured rat sciatic nerves effectively promoted the recovery of motor function and enhanced nerve structure regeneration. In summary, by simply assembling cells into a 3D-spheroid conformation, the therapeutic potential of SCLCs derived from clinically available cbMSCs for promoting nerve regeneration was enhanced significantly. Thus, these cells hold great potential for translation to clinical applications for treating peripheral nerve injury.
Collapse
Affiliation(s)
- Yu-Jie Lin
- Institute of Biomedical Engineering, National Tsing Hua University, Hsinchu, Taiwan
| | - Yun-Wei Lee
- Institute of Biomedical Engineering, National Tsing Hua University, Hsinchu, Taiwan
| | - Che-Wei Chang
- Institute of Biomedical Engineering, National Tsing Hua University, Hsinchu, Taiwan.,Department of Medical Science, National Tsing Hua University, Hsinchu, Taiwan
| | - Chieh-Cheng Huang
- Institute of Biomedical Engineering, National Tsing Hua University, Hsinchu, Taiwan
| |
Collapse
|
20
|
Kim SJ, Kim EM, Yamamoto M, Park H, Shin H. Engineering Multi-Cellular Spheroids for Tissue Engineering and Regenerative Medicine. Adv Healthc Mater 2020; 9:e2000608. [PMID: 32734719 DOI: 10.1002/adhm.202000608] [Citation(s) in RCA: 83] [Impact Index Per Article: 20.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/14/2020] [Revised: 07/09/2020] [Indexed: 02/06/2023]
Abstract
Multi-cellular spheroids are formed as a 3D structure with dense cell-cell/cell-extracellular matrix interactions, and thus, have been widely utilized as implantable therapeutics and various ex vivo tissue models in tissue engineering. In principle, spheroid culture methods maximize cell-cell cohesion and induce spontaneous cellular assembly while minimizing cellular interactions with substrates by using physical forces such as gravitational or centrifugal forces, protein-repellant biomaterials, and micro-structured surfaces. In addition, biofunctional materials including magnetic nanoparticles, polymer microspheres, and nanofiber particles are combined with cells to harvest composite spheroids, to accelerate spheroid formation, to increase the mechanical properties and viability of spheroids, and to direct differentiation of stem cells into desirable cell types. Biocompatible hydrogels are developed to produce microgels for the fabrication of size-controlled spheroids with high efficiency. Recently, spheroids have been further engineered to fabricate structurally and functionally reliable in vitro artificial 3D tissues of the desired shape with enhanced specific biological functions. This paper reviews the overall characteristics of spheroids and general/advanced spheroid culture techniques. Significant roles of functional biomaterials in advanced spheroid engineering with emphasis on the use of spheroids in the reconstruction of artificial 3D tissue for tissue engineering are also thoroughly discussed.
Collapse
Affiliation(s)
- Se-Jeong Kim
- Department of Bioengineering, Hanyang University, 222 Wangsimri-ro, Seongdong-gu, Seoul, 04763, Republic of Korea
- BK21 Plus Future Biopharmaceutical Human Resources Training and Research Team, Hanyang University, 222 Wangsimri-ro, Seongdong-gu, Seoul, 04763, Republic of Korea
| | - Eun Mi Kim
- Department of Bioengineering, Hanyang University, 222 Wangsimri-ro, Seongdong-gu, Seoul, 04763, Republic of Korea
- BK21 Plus Future Biopharmaceutical Human Resources Training and Research Team, Hanyang University, 222 Wangsimri-ro, Seongdong-gu, Seoul, 04763, Republic of Korea
| | - Masaya Yamamoto
- Department of Materials Processing, Graduate School of Engineering, Tohoku University, 6-6-02 Aramaki-aza Aoba, Aoba-ku, Sendai, 980-8579, Japan
- Biomedical Engineering for Diagnosis and Treatment, Graduate School of Biomedical Engineering, Tohoku University, 6-6-02 Aramaki-aza Aoba, Aoba-ku, Sendai, 980-8579, Japan
| | - Hansoo Park
- School of Integrative Engineering, College of Engineering, Chung-Ang University, 84 Heukseok-ro, Dongjak-gu, 06974, Republic of Korea
| | - Heungsoo Shin
- Department of Bioengineering, Hanyang University, 222 Wangsimri-ro, Seongdong-gu, Seoul, 04763, Republic of Korea
- BK21 Plus Future Biopharmaceutical Human Resources Training and Research Team, Hanyang University, 222 Wangsimri-ro, Seongdong-gu, Seoul, 04763, Republic of Korea
- Institute of Nano Science & Technology (INST), Hanyang University, 222 Wangsimri-ro, Seongdong-gu, Seoul, 04763, Republic of Korea
| |
Collapse
|
21
|
Doulgkeroglou MN, Di Nubila A, Niessing B, König N, Schmitt RH, Damen J, Szilvassy SJ, Chang W, Csontos L, Louis S, Kugelmeier P, Ronfard V, Bayon Y, Zeugolis DI. Automation, Monitoring, and Standardization of Cell Product Manufacturing. Front Bioeng Biotechnol 2020; 8:811. [PMID: 32766229 PMCID: PMC7381146 DOI: 10.3389/fbioe.2020.00811] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/11/2020] [Accepted: 06/23/2020] [Indexed: 12/18/2022] Open
Abstract
Although regenerative medicine products are at the forefront of scientific research, technological innovation, and clinical translation, their reproducibility and large-scale production are compromised by automation, monitoring, and standardization issues. To overcome these limitations, new technologies at software (e.g., algorithms and artificial intelligence models, combined with imaging software and machine learning techniques) and hardware (e.g., automated liquid handling, automated cell expansion bioreactor systems, automated colony-forming unit counting and characterization units, and scalable cell culture plates) level are under intense investigation. Automation, monitoring and standardization should be considered at the early stages of the developmental cycle of cell products to deliver more robust and effective therapies and treatment plans to the bedside, reducing healthcare expenditure and improving services and patient care.
Collapse
Affiliation(s)
- Meletios-Nikolaos Doulgkeroglou
- Regenerative, Modular & Developmental Engineering Laboratory, National University of Ireland Galway, Galway, Ireland.,Science Foundation Ireland, Centre for Research in Medical Devices, National University of Ireland Galway, Galway, Ireland
| | - Alessia Di Nubila
- Regenerative, Modular & Developmental Engineering Laboratory, National University of Ireland Galway, Galway, Ireland.,Science Foundation Ireland, Centre for Research in Medical Devices, National University of Ireland Galway, Galway, Ireland
| | | | - Niels König
- Fraunhofer Institute for Production Technology, Aachen, Germany
| | - Robert H Schmitt
- Production Engineering Cluster, RWTH Aachen University, Aachen, Germany
| | - Jackie Damen
- STEMCELL Technologies Inc., Vancouver, BC, Canada
| | | | - Wing Chang
- STEMCELL Technologies Ltd., Cambridge, United Kingdom
| | - Lynn Csontos
- STEMCELL Technologies Ltd., Cambridge, United Kingdom
| | - Sharon Louis
- STEMCELL Technologies Inc., Vancouver, BC, Canada
| | | | - Vincent Ronfard
- College System of Pharmacy, University of North Texas Health Science Center, Fort Worth, TX, United States.,Cutiss AG, Zurich, Switzerland.,HairClone, Manchester, United Kingdom
| | - Yves Bayon
- Medtronic - Sofradim Production, Trévoux, France
| | - Dimitrios I Zeugolis
- Regenerative, Modular & Developmental Engineering Laboratory, National University of Ireland Galway, Galway, Ireland.,Science Foundation Ireland, Centre for Research in Medical Devices, National University of Ireland Galway, Galway, Ireland
| |
Collapse
|