Hierarchy of restorative space required for different types of dental implant prostheses

The effect of attachment systems and denture cleaning methods on microbial biomass and composition in implant-supported overdentures: an experimental study

OBJECTIVE

This research endeavors to scrutinize the influence of attachment systems and denture cleaning methodologies on microbial biomass and composition within the realm of implant-supported overdentures, a crucial consideration for patients with dentition defects necessitating such prosthetic solutions.

SUBJECTS AND METHODS

Employing five polymethyl methacrylate specimens designed to emulate the fitting surfaces of traditional dentures and implant-supported overdentures. Following the polishing of each specimen and the quantification of its roughness, co-cultivation with three distinct microbial strains ensued, culminating in ultrasonic cleaning in water. The bar-clip group, differentiated by the depth of attachment, underwent cleaning employing four diverse methods. Biomass quantities were meticulously recorded both pre and post cleaning interventions, with subsequent data analysis via t-testing and one-way ANOVA, maintaining a significance level of α = 0.05.

RESULTS

The bar-clip groups demonstrated an elevated degree of microbial adhesion, with the deeper locator group exhibiting heightened biomass residue post-cleaning, indicative of increased cleaning complexity. Ultrasonic cleaning predominantly targeted biofilm and deceased bacteria, whereas chemical cleaners primarily reduced the quantity of viable bacteria. The synergistic application of ultrasonics and chemical cleaning treatments yielded the minimal biomass residue.

CONCLUSION

In contemplating the utilization of dentures milled by dental computer-aided design/manufacturing systems, meticulous pre-use surface polishing is imperative. The extent of biofilm adhesion correlates with the chosen attachment system. This study advocates for the incorporation of ultrasonic cleaning in conjunction with chemical cleaning solutions to optimize the removal of biofilm and live cellular entities in the context of implant-supported overdentures.

Impact of vertical alveoloplasty on changes in keratinized mucosa width following full-arch immediate implant placement and rehabilitations: A prospective case series

PURPOSE

This prospective case series aimed to investigate the effect of vertical alveoloplasty on the changes in keratinized mucosa width (KMW) following full-arch immediate implant placement and rehabilitation.

MATERIALS AND METHODS

A total of 17 potential edentulous patients were enrolled and received implant placement and full-arch implant-supported immediate rehabilitations. The main outcome was to analyze the effect of vertical alveoloplasty on the changes in KMW. The amount of vertical alveoloplasty during implant surgery as well as the changes in KMW at buccal aspects from the day of surgery to 6 months post-surgery were recorded on the implant-level using a periodontal probe. The secondary outcome was to analyze the other possible factors that affected the changes in KMW. The included factors were the initial KMW, the distribution of implants in the maxilla and mandible, the distribution of implants in the anterior and posterior regions, the distribution of implants in extraction sockets and healed ridges, and gender. Mann-Whitney non-parametric tests and multiple linear regression adjusted by generalized estimating equations (GEE) were used to statistically analyze the data.

RESULTS

A total of 121 implant positions were analyzed. The KMW was 4.1± 2.0 mm on the day of the surgery and 4.1± 1.7 mm 6 months post-surgery. The mean changes in KMW following 6 months were -0.1± 1.6 mm (p = 0.824). From the results of GEE, the vertical amount of alveoloplasty had no significant effect on changes in KMW. Both initial KMW and the distribution of implants in the anterior and posterior regions had significant impacts on the changes in KMW (p < 0.0001).

CONCLUSION

The amount of vertical alveoloplasty during implant surgery has no significant impact on the KMW. The KMW remained stable from baseline to 6 months after alveoloplasty, implant placement, and immediate rehabilitations in potential edentulous arches. The initial KMW and the distribution of implants in the anterior and posterior regions were the possible factors affecting changes in KMW.

Implant-Supported, Bar-Retained Maxillary Overdenture and Mandibular Implant-Supported, Metal-Acrylic Resin, Screw-Retained, Fixed Complete Denture on an Edentulous Patient: Case Report

Most edentulous patients prefer fixed restoration or detachable prostheses over conventional complete dentures. The case report aims to address and discuss the clinical and laboratory steps of implant-supported, bar-retained maxillary overdenture and mandibular implant-supported, metal-acrylic resin, screw-retained, fixed complete denture. Impression techniques and laboratory steps are discussed and demonstrated to minimize the postfabrication or insertion complication. It lets you achieve the passive fit of the prosthesis that maintains the osseointegration by reducing stress on implants and the surrounding bone.

The accuracy of implant placement using a combination of static and dynamic computer-assisted implant surgery in fully edentulous arches: A prospective controlled clinical study

OBJECTIVE

To compare the accuracy of implant position, using a combination of static and dynamic computer-assisted implant surgery (CAIS), with either static, dynamic, or freehand implant placement, in fully edentulous arches.

MATERIALS AND METHODS

Twenty-one patients with a total of 88 fixtures were included. Implants were divided equally into four groups: a combination of static and dynamic CAIS (SD group), static CAIS (S group), dynamic CAIS (D group), and freehand placement (FH group). Angular deviation, as well as the 3D platform and apex deviations, were measured for all groups. Furthermore, the direction of implant deviation was recorded and compared.

RESULTS

The FH group showed significantly more deviation compared to all groups, considering all the aspects, and at both the implant platform and apex. A significant difference in angular deviation between the SD and S groups (p < .001), and between the SD and D groups (p < .001) was noted, favoring the SD group. When evaluating implant distribution, the FH group showed a tendency towards the buccal, apical, and distal directions at platform and apex, while in the D group, implants shifted more to the buccal. In contrast, the SD group did not show a trend toward any specific direction. The S and SD groups did not show a statistical significance considering any direction.

CONCLUSIONS

The combination of static and dynamic CAIS increases the accuracy of implant placement in fully edentulous arches when compared with either static or dynamic CAIS alone, as well as freehand placement.

The mechanical complications and behavior of angulated dental implant abutment systems versus conventional abutments, a narrative review

Background

Angulated screw channel (ASC) abutment allows off-axis dental implants to be used in dental restorations without the need for cementation. As this is a relatively new system, research on its clinical performance is limited.

Objectives

To summarize the available in-vitro and in-vivo studies on the mechanical and technical issues associated with the ASC system and compare its clinical performance with that of conventional implant-supported abutments.

Methods

A comprehensive literature search in PubMed, Web of Science, and ScienceDirect databases was performed, focusing on articles about angulated (angled) screw channel (ASC) systems published in English between January 2015 and November 2023. Only in-vitro and in-vivo studies were included.

Results

After analyzing the recorded articles, 26 studies (11 in vivo and 15 in vitro) were included in the final discussion and review.

Conclusion

Although the ASC system is still relatively new, and is presently outperformed by conventional abutment systems in terms of technical and mechanical properties, in short- and medium-term in-vivo studies, it was shown reliable for retaining single or multiple-unit implant restorations in both posterior and anterior zones. Still, further long-term clinical research is needed to fully elucidate the risk factors associated with ASC failures.

Classification system for maxillary fixed dental prostheses

PURPOSE

To present an addendum to existing fixed dental prostheses (FDPs) classification system for maxillary prostheses. The new classification identifies the relationships between FP-1 (fixed prostheses) designs and newly developed clinical interdental gingival contours.

MATERIALS AND METHODS

Clinical and laboratory descriptions of the various types of full-arch fixed prostheses are described with photographic illustrations. Benefits and limitations of the various prosthetic designs are explained. Surgical differences in the amount of alveolectomy are illustrated. One clinical case is demonstrated.

RESULTS

A new classification system for maxillary implant fixed complete dentures is presented. The new system will serve as an improved communication aid for clinicians, patients, and laboratory technicians. Treatment of patients with edentulous maxillae and/or terminal dentitions and implant fixed complete dentures include several options relative to design and materials. Restorative space can have a major impact on prosthesis design and longevity. Early on in dental implant therapy, prostheses were generally made with cast metal frameworks, denture bases and denture teeth. Prosthetic complications were widely reported. With increased clinical experience and improved materials, computer-aided design and computer-aided manufacturing (CAD-CAM) protocols were developed that allowed stronger prostheses to be constructed in reduced or small restorative volumes. FP-1 ceramic implant-supported fixed prostheses (CISFPs) are designed to replace only the dental hard tissues and to promote preservation and rehabilitation of gingival soft tissues. The physical properties and minimum thickness requirements in full arch prostheses are influenced by several factors including distances between implants and rigid connector sizes.

CONCLUSION

FP-1 CISFPs may be the closest prostheses the profession can offer edentulous patients that mimic the look, feel, and function of missing dentitions. Aesthetic outcomes of FP-1 CISFPs are variable and depend on a multitude of factors. This article presented a classification system that builds on existing classification by identifying the level of papilla heights achieved with FP-1 CISFPs.

Incorporating Stud Attachments in the Bar Design for an Implant-Supported Overdenture

Bone resorption following tooth loss might compromise retention, stability, and support of conventional removable prostheses, and for this reason, implant-supported overdentures are suggested as a viable alternative for completely edentulous patients. Bars, telescopic attachments, or stud attachments have been used to provide retention through a different mechanism of action based on specific design characteristics. The purpose of this report is to thoroughly describe the applied protocol for the fabrication of an implant overdenture supported by two bars incorporating stud attachments. A 67-year-old male patient presented to the Postgraduate Clinic of the National and Kapodistrian University in Athens seeking dental rehabilitation. The remaining teeth were characterized with poor prognosis, mainly due to their periodontal status. The proposed treatment plan included the placement of four implants in the maxilla and two implants in the mandible and the fabrication of implant-supported overdentures. The diagnostic stages revealed adequate prosthetic space that would enable the fabrication of a bar substructure for the maxillary overdenture. To combine the benefits of bars and stud attachments, two bars with four attachments were fabricated. Evaluation of the delivered prosthesis revealed adequate retention, support, and stability achieved with minimal palatal coverage. Patient's reported satisfaction and quality of life were increased. Recall appointments at one, six, and twelve months did not reveal any adverse effects or patient's complaints. According to the present case report, different types of attachments may be used after careful study of each case. More studies are needed to report on different aspects of the chosen treatment plan.

Evidence-based clinical management of localised tooth wear and a repeatedly dislodged posterior crown utilising the Dahl Concept

This clinical case report demonstrates the use of the Dahl Concept in the management of the repeated dislodgement of a posterior full coverage crown associated with a reduced restorative space. The described technique harnesses the addition of resin composite and a temporarily cemented provisional full coverage crown to create sufficient restorative space for the cementation of a definitive posterior full coverage crown restoration at the six-month review.

Translucent monolithic zirconia titanium-supported FP1 full-arch prosthesis: A novel proof of concept to address esthetic, functional, and biologic challenges

OBJECTIVE

Despite the wide clinical use of translucent zirconia for full-arch implant prostheses, reduced flexural strength and fracture toughness compared with high-strength opaque zirconia needs to be addressed. A novel proof of concept for FP1 full-arch prosthesis featured by translucent monolithic zirconia and titanium framework was presented.

CLINICAL CONSIDERATIONS

Computer-guided implant planning and surgery were executed and digitally designed FP1 temporary prosthesis prefabricated. Implant and prosthetic placement were achieved with a set of three-dimensional (3D)-printed templates. Implants were immediately loaded. After 4 months intraoral optical scan was taken to record implant coordinates, soft tissue anatomy, and temporary FP1 prosthesis. A novel digital workflow was used to design and mill overlaying translucent zirconia and anatomically shaped titanium framework with a scalloped soft-tissue interface. Final FP1 prosthesis was assembled cementing zirconia jacket on titanium counterpart.

CONCLUSIONS

Translucent zirconia supported by titanium framework can address esthetic and mechanical requirements of FP1 full-arch prosthesis, minimizing risk of fracture and providing a rigid and passive joint with supporting implants. The smooth and highly polished titanium surface with an anatomic design, tightly matching scalloped soft tissue interface, can limit food impaction, air and saliva leakage and contribute to overall biologic integration of FP1 full-arch prosthesis.

CLINICAL SIGNIFICANCE

Translucent monolithic zirconia featured with anatomically shaped titanium framework with scalloped transmucosal part, combining a pleasant esthetic outcome with increased flexural strength and fracture toughness, may be indicated to increase the clinical performance of FP1 full-arch prosthesis.

Computer-Guided Osteotomy with Simultaneous Implant Placement and Immediately Loaded Full-Arch Fixed Restoration: A Case Report

Aim: This case report aims to illustrate a clinical protocol that allows for the rehabilitation of patients requiring extensive osteotomy, simultaneous implant placement, and full-arch, screwed-in prosthetics in one session. This protocol allows for the improvement of the aesthetics and functionality of the fixed implant-supported prosthesis through the preoperative planning of all surgical procedures, including osteotomy, and of the prosthesis through the application of 3D-printing technology for the creation of surgical templates and prostheses. Methods: This case report concerns a 72-year-old patient, ASA1, who, following diagnosis, the establishment of a treatment plan, and the provision of informed consent, opted for an immediate, full-arch rehabilitation of the lower arch. The digital planning stage started with the correct positioning of the fixtures. The proper bone levels were found and used to guide the creation of the provisional screwed-in prothesis. Two templates with the same supports (landmarks/pins) were then 3D-printed: a positioning template, including a slit to assist the surgeon during the osteotomy, and a surgery template to assist the surgeon during the implants’ positioning. A screwed-in prosthesis encased in resin C&B MFH (NEXTDENT®, Soesterberg, The Netherlands) was delivered. Minimal occlusal adjustments were performed. Results: In a single clinical session, through careful planning and the pre-operative 3D printing of a prosthesis, a temporary implant-supported prosthetic rehabilitation was possible in a case that required an extended osteotomy. Clinically, the correspondence between the virtual design phase and the final realization was consistent. At a functional level, the provisional prosthesis required minimal occlusal adjustments and the DVO values obtained in the immediate post-operative period were found to be comparable to those of the virtual design. By planning the final position of the bone and the implants in advance, it was possible to deliver a full-arch prothesis with proper implant emergence, occlusal vertical dimensions, and occlusal relationship. Conclusion: This fully digital protocol allows the clinician to preview and plan the osteotomy and implant surgery as well as the delivery of the temporary, immediately loaded, complete, fixed prosthesis in patients who are candidates for post-extraction surgery with the need for severe osteotomy.

Suggested mesiodistal distance for multiple implant placement based on the natural tooth crown dimension with digital design

PURPOSE

The purpose of this investigation was to identify a mesiodistal algorithm for multiple posterior implant placement based upon an ideal prosthetically restoration design.

METHODS

One hundred one cases of posterior free-end edentulous arches were selected for digital crown designs and measurements. Cone bean computed tomogram and digital fabricated crown were applied. DICOM files were exported to a viewer software (BlueSkyPlan4) to generate digital crown and measurement. The mesiodistal space between roots of adjacent teeth and center of the potential implant horizontally, from both cross-section and coronal plane were measured. Comparisons were performed using t-tests.

RESULTS

No significant difference was found in the distances of the maxillary and mandibular posterior implants to adjacent natural teeth (p > 0.05). For interdental/implant distances, premolars are around 4.2 mm and molars are 5.4 mm, correspondently. The second premolar interimplant distance is around 7-7.4 mm. The distance of interimplant of the first molar is about 8-8.5 mm. For the maxillary second molar, the interimplant distance is 9.26 ± 0.29 mm and the mandibular second molar interimplant distance is 9.58 ± 0.19 mm, which is significantly different. No difference was found between the two different measurement methods.

CONCLUSION

A mesiodistal algorithm of 4-4.6 (implant to adjacent canine tooth), 7-7.4, 8-8.5, and 9-9.5 mm was recommended for interimplant/tooth distance from first premolar to second molar when placing implants with or without case-specific prosthetic planning prior to surgery.

Implant-supported bar overdentures in patients treated surgically for head and neck cancer: Two case reports

Prosthetic rehabilitation of patients who have undergone head and neck cancer (HNC) surgery could be very challenging. The aim of this article is to present two HNC clinical cases rehabilitated with implant-supported removable complete dental prosthesis with different types of CB.

Radiographic Evaluation of Prosthodontic Patients

This article focuses on radiographic imaging with regard to planning, treating, and maintaining partially and completely edentulous prosthodontic patients with dental implants. Cone-beam computed tomography (CBCT) is the preferred imaging method for pretreatment dental implant treatment planning. Radiographic guides containing radiopaque materials and/or fiducial markers transfer both the proposed prosthesis design and desired implant location for appropriate radiographic evaluation. The three-dimensional CBCT analysis provides information on the adjacent relevant anatomy, bone volume of the edentulous sites, and restorative space assessment.