Solid state of inhalable high dose powders

Disordered mesoporous silica particles: an emerging platform to deliver proteins to the lungs

Pulmonary delivery and formulation of biologics are among the more complex and growing scientific topics in drug delivery. We herein developed a dry powder formulation using disordered mesoporous silica particles (MSP) as the sole excipient and lysozyme, the most abundant antimicrobial proteins in the airways, as model protein. The MSP had the optimal size for lung deposition (2.43 ± 0.13 µm). A maximum lysozyme loading capacity (0.35 mg/mg) was achieved in 150 mM PBS, which was seven times greater than that in water. After washing and freeze-drying, we obtained a dry powder consisting of spherical, non-aggregated particles, free from residual buffer, or unabsorbed lysozyme. The presence of lysozyme was confirmed by TGA and FT-IR, while N2 adsorption/desorption and SAXS analysis indicate that the protein is confined within the internal mesoporous structure. The dry powder exhibited excellent aerodynamic performance (fine particle fraction <5 µm of 70.32%). Lysozyme was released in simulated lung fluid in a sustained kinetics and maintaining high enzymatic activity (71-91%), whereas LYS-MSP were shown to degrade into aggregated nanoparticulate microstructures, reaching almost complete dissolution (93%) within 24 h. MSPs were nontoxic to in vitro lung epithelium. The study demonstrates disordered MSP as viable carriers to successfully deliver protein to the lungs, with high deposition and retained activity.

Fabrication of Uniform Melatonin Microparticles Potentially for Nasal Delivery: A Comparison of Spray Drying and Spray Freeze Drying

PURPOSE

Insomnia is a major health concern, and melatonin (MLT) is key for initiating sleep. Delivering MLT nasally can enhance brain bioavailability by targeting the olfactory region. This study aimed to fabricate MLT embedded microparticles for nasal delivery.

METHODS

MLT-cyclodextrin (CD) derivatives complex microparticles (MCCMPs) were fabricated by spray drying and spray freeze drying MLT and CD derivative solutions. Phase solubility and 1H-1H ROSEY NMR analysis assessed MLT-CD assembly. The effects of formulation compositions and process parameters on microparticle structural attributes were investigated. The in vitro nasal release and deposition performances were evaluated by a modified paddle-over-disk apparatus and 3D-printed nasal cavity cast, respectively.

RESULTS

Sodium sulphobutylether-β-cyclodextrin (SBE-β-CD) exhibited the best complexation ability with MLT, with the indole structure of MLT included in its cavity. Spray dried MCCMPs showed dense structure with high density, while the spray freeze dried counterpart showed the brittle and porous structure with low density. Despite the porous structure may promote the release rate of spray freeze dried samples, the high hydrophilicity of the CD derivative overshadows this advantage. Samples prepared by spray drying not only exhibited rapid release rates but also could deposit more effectively in the olfactory region, as they avoid breakage due to their higher mechanical strength. The optimal sample showed ~ 86.70% of the MLT released at 20 min and ~ 10.57% of the deposition fraction in the olfactory region.

CONCLUSIONS

This work compares MCCMPs fabricated by spray drying and spray freeze drying, providing the optimal formulation and process combinations.

Pulmonary inhalation for disease treatment: Basic research and clinical translations

Pulmonary drug delivery has the advantages of being rapid, efficient, and well-targeted, with few systemic side effects. In addition, it is non-invasive and has good patient compliance, making it a highly promising drug delivery mode. However, there have been limited studies on drug delivery via pulmonary inhalation compared with oral and intravenous modes. This paper summarizes the basic research and clinical translation of pulmonary inhalation drug delivery for the treatment of diseases and provides insights into the latest advances in pulmonary drug delivery. The paper discusses the processing methods for pulmonary drug delivery, drug carriers (with a focus on various types of nanoparticles), delivery devices, and applications in pulmonary diseases and treatment of systemic diseases (e.g., COVID-19, inhaled vaccines, diagnosis of the diseases, and diabetes mellitus) with an updated summary of recent research advances. Furthermore, this paper describes the applications and recent progress in pulmonary drug delivery for lung diseases and expands the use of pulmonary drugs for other systemic diseases.

Drug-drug co-amorphous systems: An emerging formulation strategy for poorly water-soluble drugs

Overcoming the poor water solubility of small-molecule drugs is a major challenge in the development of clinical pharmaceuticals. Amorphization of crystalline drugs is a highly effective strategy to improve their aqueous solubility. However, amorphous drugs are thermodynamically unstable and likely to crystallize during manufacturing and storage. Recently, drug-drug co-amorphous systems have emerged as a novel strategy to not only enable enhanced dissolution and physical stability of the individual drugs within the system but also to provide a strategy for combination therapy of the same or different clinical indications. This review serves to highlight advances in the methods used to manufacture and characterize drug-drug co-amorphous systems, summarize drug-drug co-amorphous applications reported in recent decades, and provide an outlook on future possibilities and perspectives.

Modification of insulating oils and oil-based titanium dioxide nanofluids for transformers: a review

In the last decade, oil-based titanium dioxide nanofluids (TiO2 NFs) have gained immense interest due to their unique insulating properties and excellent thermal performance, which endow them with the potential for application in the field of modified insulating oils. A timely comparison, analysis and summary of recent advances in the preparation, characterization, and properties of different oil-based TiO2 NFs for oil-immersed power transformers will contribute to provide a useful reference for the subsequent development of such materials. Preparation methods are reviewed along with their merits and demerits. Characterization techniques including scanning electron microscopy (SEM), transmission electron microscopy (TEM), optical microscopy (OM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), dynamic light scattering (DLS), Fourier transform infrared (FTIR) spectroscopy, thermally stimulated current (TSC), pulse electroacoustic technique (PEA), finite element analysis (FEA), fluorescence spectroscopy, Raman spectroscopy and zeta potential analysis are all applied to determine the crystal structure, particle size, surface function, surface charge and stability. Stabilization mechanisms are also discussed in detail. Some critical properties of oil-based TiO2 NFs under the application of different influencing factors such as base oils, crystal structure, size of nanoparticles, surface modifiers, mixing percentage, and aging environment are highlighted. Finally, the existing challenges and perspectives are presented for future research.

Amorphicity and Aerosolization of Soluplus-Based Inhalable Spray Dried Powders

Soluplus is a polymer that has been explored to prepare nanocomposites for pulmonary drug delivery and is non-toxic. However, its aerosolization attributes when spray-dried have not been investigated. Hence, this work aimed to investigate the aerosol performance of soluplus-based spray-dried powders. In addition, the potential use of leucine to improve the aerosolization of such particles was also investigated by including leucine at 10 or 20% w/w. 4% w/w salbutamol was used as a model drug in all the formulations primarily to aid quantification during aerosolization evaluation and for assessing the interaction between the drug and soluplus using infrared spectroscopy with the multivariate analysis approach of principal component analysis (PCA). Three formulations (4% salbutamol/96% soluplus, 4% salbutamol/86% soluplus/10% leucine, 4% salbutamol/76% soluplus/20% leucine) were prepared. The formulations were characterized in terms of solid-state, water content, particle size/morphology, and aerosolization. Similarly, two additional formulations (14% salbutamol/86% soluplus and 24% salbutamol/76% soluplus) were prepared to assess potential non-covalent interactions between salbutamol and soluplus. The formulations with only salbutamol and soluplus were amorphous, as evident from X-ray diffraction. Leucine was crystalline in the formulations. All the spray-dried formulations were irregular spheres with surface corrugation. The 96% soluplus powder showed an emitted fraction (EF) and fine particles fraction (FPF) of 91.9 and 49.8%, respectively. The inclusion of leucine at 10% did not increase the EF; however, an increase in FPF (69.7%) was achieved with 20% leucine. PCA of the infrared spectra suggested potential non-covalent interactions between salbutamol and soluplus. It hinted at the potential involvement of ketone groups of the excipient. This study concludes that soluplus-based spray-dried powder with or without leucine can potentially be utilized for pulmonary drug delivery. In addition, PCA can effectively be utilized in assessing interactions and overcoming limitations associated with visual assessment of the spectra of such formulations.