Changes in nasal volume after surgically assisted bone-borne rapid maxillary expansion

Tooth-Bone-Borne vs Bone-Borne Rapid Maxillary Expanders on Dentoskeletal Changes

Purpose

This study compared the insertion and thickness of the cortical bone, the parallelism of the midpalatal suture, and the skeletal transverse dimension using a microimplant-assisted rapid palatal expansion (MARPE) with those produced by bone-anchored maxillary expander (BAME) in adults.

Patients and Methods

The sample comprised 18 patients (mean age, 29.9±9.4 years) selected for the MARPE group and 18 (mean age 24.8±6.8 years) selected for the BAME group. Cone-Beam computed tomography scans taken just before and after the expansion.

Results

After treatment, there was a significant palatal depth decrease. In addition, maxillary and mandibular width were increased in both groups. Regarding the cortical bone insertion and cortical bone width, it is shown an increase in both groups but those changes are not significant. However, the anterior suture opening effect occurs more frequently in the BAME than in the MARPE device. There are no differences in the frequency of opening of the midpalatal suture in the cases treated with MARPE and BAME, in both cases the most frequent opening morphology is parallel, independently of midpalatal suture maturation.

Conclusion

There are no differences in the use of MARPE or BAME in the parallelism of the middle palatal suture, the cortical bone insertion, and thickness according to the maturation stages of the midpalatal suture but significantly increases the transverse dimensions of the maxillary skeleton.

Posterior Palatal Expansion via Subnasal Endoscopy (2PENN) for Maxillary Deficiency: A Pilot Study

OBJECTIVE

Surgically assisted rapid palatal expansion (SARPE) addresses transverse maxillary deficiency, a known contributor to nasal obstruction. The purpose of this study was to assess the feasibility, preliminary outcomes, and safety of posterior palatal expansion via subnasal endoscopy (2PENN), a modified SARPE procedure, aimed at achieving anterior and posterior maxillary expansion.

METHODS

This prospective case series included consecutive adult patients with findings of transverse maxillary deficiency that underwent the 2PENN procedure from 4/2021 to 4/2022. Patients completed pre- and post-operative clinical evaluations, Nasal Obstruction and Septoplasty Effectiveness (NOSE) questionnaires, and computed tomography (CT), with measures including expansion at the level of the posterior nasal spine (PNS), first maxillary inter-molar distance (IMD), and anterior nasal spine (ANS).

RESULTS

The cohort (N = 20) was middle-aged (39 ± 11 years), predominantly male (80%), and overweight (BMI 28 ± 4 kg/m2 ). The majority (85%) of patients had sleep breathing issues, of which 10 (59%) had polysomnography-confirmed obstructive sleep apnea (OSA). Full anterior-posterior separation of the mid-palatal suture line was evident on all post-operative CT scans, with mean expansion at the PNS of 3.6 ± 1.3 mm, IMD of 6.1 ± 1.6 mm and ANS of 7.0 ± 1.6 mm (p < 0.001). Following surgery, mean NOSE scores improved from 57 ± 23 to 14 ± 13 (p < 0.001). One patient required maxillary antrostomy for post-operative sinusitis.

CONCLUSION

2PENN is an effective and safe technique for achieving both anterior and posterior maxillary expansion in patients with transverse maxillary deficiency. Further study is warranted to better understand the effect of 2PENN in patients with OSA, particularly as it relates to improving pharyngeal patency.

LEVEL OF EVIDENCE

4 Laryngoscope, 134:1970-1977, 2024.

Short-term outcomes in the upper airway with tooth-bone-borne vs bone-borne rapid maxillary expanders

BACKGROUND

This study compared the area and minimal section of the nasal cavity, nasopharynx, oropharynx, and hypopharynx in cases treated with different methods of microimplant-assisted expansion.

METHODS

Based on a pilot study to calculate the sample size, 30 patients with transverse maxillary deficiency over 14 years of age were retrospectively selected. These patients had received two different types of microimplant-assisted maxillary expansion treatment (MARPE and BAME). The patient underwent Cone-Beam computed tomography (CBCT) before and after treatment (mean time 1.5 months) with MARPE or BAME and upper airway measurements (volume and minimum cross-sectional area) were taken to assess upper airways changes and compare changes between the groups. A paired sample t-test was performed to evaluate the T0-T1 change of airway measurements obtained with MARPE and BAME, and a student t-test to compare changes in airway measurements between MARPE and BAME.

RESULTS

This investigation shows a statistically significant increase in total nasopharyngeal airway volume (0.59 ± 1.42 cm3; p < 0.01), total oropharyngeal airway volume (3.83 ± 7.53 cm3; p < 0.01) and minimum oropharyngeal cross-section (53.23 ± 126.46 mm2; p < 0.05) in all cases treated with micro-screw assisted expansion. The minimal cross-sectional area of the oropharynx ((79.12 ± 142.28 mm2; p < 0.05) and hypopharynx (59.87 ± 89.79 mm2; p < 0.05) showed significant changes for cases treated with BAME. As for the comparison between cases treated with MARPE and BAME, no differences in upper airway changes have been observed, except for the minimum cross-sectional area of the nasal cavity, which increases for MARPE (52.05 ± 132.91 mm2) and decreases for BAME (-34.10 ± 90.85 mm2).

CONCLUSIONS

A significant increase in total area and minimal section at the level of nasopharynx and oropharynx was observed in cases treated with BAME. Regarding the comparison of MARPE and BAME treatments, no differences were found in the total airway volume and minimal section in upper airway except for the minimum cross section of the nasal cavity that increases for MARPE and decreases for BAME.

Comparing Airway Analysis in Two-Time Points after Rapid Palatal Expansion: A CBCT Study

BACKGROUND

The aim of this study is to investigate the upper airway analysis at two-time points after the rapid maxillary expansion was performed, using cone-beam computed tomography.

METHODS

Subjects from the Orthodontic Department at the Aristotle University of Thessaloniki with unilateral or bilateral posterior crossbite were screened according to the selection criteria. A sample size calculation was performed, and a total of 14 subjects were recruited. All subjects received a rapid maxillary expansion with a Hyrax-type device as part of their comprehensive treatment. A CBCT was taken before the treatment (T1), immediately after the expansion was completed (T2), and 6 months after (T3). Their upper airway was measured using the CBCT images. Airway volume (V) and minimal cross-sectional area (MCS) were extracted and compared using SPSS to analyze the means.

RESULTS

A statistically significant difference was found between all time points regarding both V and MCS (p < 0.001, p = 0.001). There was a statistically significant increase in both V and MCS measurements immediately after RPE expansion (T1-T2) and six months after expansion (T1-T3). Between the end of expansion and 6 months after (T2-T3), there was a decrease in V and no statistical difference in MCS.

CONCLUSIONS

RPE can significantly increase the volume and minimal cross-sectional area of the nasal passage airway.

Non-Surgical Transversal Dentoalveolar Compensation with Completely Customized Lingual Appliances versus Surgically Assisted Rapid Palatal Expansion in Adults-Tipping or Translation in Posterior Crossbite Correction?

The aim of this study was to investigate buccolingual tooth movements (tipping/translation) in surgical and nonsurgical posterior crossbite correction. A total of 43 patients (f/m 19/24; mean age 27.6 ± 9.5 years) treated with surgically assisted rapid palatal expansion (SARPE) and 38 patients (f/m 25/13; mean age 30.4 ± 12.9 years) treated with dentoalveolar compensation using completely customized lingual appliances (DC-CCLA) were retrospectively included. Inclination was measured on digital models at canines (C), second premolars (P2), first molars (M1), and second molars (M2) before (T₀) and after (T₁) crossbite correction. There was no statistically significant difference (p > 0.05) in absolute buccolingual inclination change between both groups, except for the upper C (p < 0.05), which were more tipped in the surgical group. Translation, i.e., bodily tooth movements that cannot be explained by pure uncontrolled tipping, could be observed with SARPE in the maxilla and with DC-CCLA in both jaws. Dentoalveolar transversal compensation with completely customized lingual appliances does not cause greater buccolingual tipping compared to SARPE.

Three-dimensional dentoskeletal changes following minimally invasive surgically assisted rapid palatal expansion: a prospective study

Dentoskeletal changes in minimally invasive surgically assisted rapid palatal expansion (SARPE) were evaluated using cone beam computed tomography (CBCT). This was a prospective study of 30 patients who underwent minimally invasive SARPE performed under local anaesthesia plus sedation by the same surgeon, in an ambulatory setting. Pre- and postoperative CBCT images were obtained for each patient. A statistically significant increase in the linear transverse dimensions of the maxilla occurred systematically. In the canine region, a mean increase of 5.84 mm occurred at the apex level and 7.82 mm at the crown level. These dimensions were 4.83 mm and 7.68 mm, respectively, in the molar region. The cross-sectional area of the maxilla increased by a mean 12.9 mm² at the palate level and 23.3 mm² at the crown level. Dental inclination to the buccal aspect was detected (mean 6.1° at the canines and 8.4° at the first molars). The alveolar process tipped buccally 10° at the molar level. Nasal width increased a mean of 3.0 mm at the canine level. Through a three-dimensional analysis, this study found that minimally invasive SARPE was effective in the correction of transverse maxillary discrepancies> 5 mm in non-growing patients. Although dental inclination to the buccal aspect occurred, significant expansion of the maxilla at the skeletal and dentoalveolar levels was confirmed.

Does MARPE therapy have effects on intracranial pressure? a clinical study

Background

We aimed to evaluate possible intracranial pressure (ICP) changes caused by screw activations during active microimplant-assisted rapid palatal expansion (MARPE) therapy of post-pubertal individuals by measuring the optic nerve sheath diameter (ONSD) under ultrasonography (US) guidance.

Methods

This study’s participants comprised 15 patients (7 males, 8 females) with posterior crossbite and a mean age of 16.7 years (14.25–20.08 years). The Maxillary Skeletal Expander (MSE) appliance was used to perform MARPE in all patients. Their vital signs (heart rate, mean arterial pressure (MAP), and peripheral oxygen saturation (SpO₂)) were recorded. The ONSD was measured by US immediately before the first screw activation (T0), and the measurements were repeated 1 min (T1) and 10 min (T2) after the first activation. In the last session of active MARPE therapy, the same measurement protocol was performed as in the first activation session (T3, T4, and T5). The patients’ perceptions of pain during the screw activation were also noted at T1 and T4 using a four-category verbal rating scale (VRS-4). The significant differences among different time intervals performed with the Friedman test (for all tested variables; SpO2, MAP, Heart Rate, VRS-4 and ONSD). Spearman correlation test was used for VRS-4 and ONSD comparisons. The statistical significance level was accepted as p < 0.05.

Results

The ONSD values ​​(T1 and T4) relatively increased within 1 min after screw activation but did not reach a statistically significant level (p > 0.05). There was also no significant difference between the initial (T0) and the final (T5) ONSD values ​​during the active MARPE therapy (p > 0.05).

Conclusion

There is no changes or alterations in intracranial pressure in late adolescents during active MARPE therapy.

Supplementary information

The online version contains supplementary material available at 10.1186/s12903-022-02482-x.

Changes in the nasal and pharyngeal airway volume with miniscrew-assisted rapid palatal expansion appliances

Objectives:

The purpose of this study was to assess the volumetric changes in the nasal and pharyngeal airway volume in patients with maxillary transverse deficiency treated with miniscrew-assisted rapid palatal expansion (MARPE) appliances.

Material and Methods:

The pre- and post-treatment cone-beam computed tomography scans of 20 subjects who underwent treatment with the MARPE appliance as part of their orthodontic treatment were included in the study. Pre- and post-expansion airway volume measurements of the nasal cavity, nasopharynx, and oropharynx were measured. Linear measurements of the skeletal structures surrounding the nasal cavity were taken to assess the pattern of airway expansion. Paired t-tests were used to evaluate nasal and pharyngeal airway volume changes with expansion. Pearson correlation test was utilized to assess the relationship between nasal and pharyngeal volume changes.

Results:

A total of 17 out of 20 samples had a successful split of the mid-palatal sutures. A significant increase in nasal airway volume (12.0%) was found post-expansion. In addition, a significant increase in linear measurements of the nasal cavity base width in the frontal plane (7.1%) and both the anterior and posterior widths in the transverse dimension (9.4% and 3.4%, respectively) were found. Significant positive correlations were found between airway volumes and increase in width of the maxillary expansion appliance.

Conclusion:

The effects of maxillary expansion with a MARPE appliance include an increase in nasal cavity volume, but not the nasopharyngeal and the oropharyngeal airway volume. The nasal cavity expands in a triangular pattern in both the frontal and transverse dimensions following orthopedic expansion with the MARPE appliance. Increase in airway volume is a result of the increase in width of the maxillary expansion appliance.

Evaluation of the effects of different rapid maxillary expansion appliances on airway by acoustic rhinometry: A randomized clinical trial

OBJECTIVE

The purpose of this 3-arm parallel trial was to compare the effects of tooth tissue-borne (TTB), tooth-borne (TB) and bone-borne (BB) rapid maxillary expansion (RME) appliances on nasal airway with acoustic rhinometry (AR).

SETTING AND SAMPLE POPULATION

Forty-six 12- to 14-year-old patients with narrow maxilla were randomly allocated into 3 study groups accordingly the type of expander: TTB, TB and BB. The participants were recruited from the Department of Orthodontics, Izmir Katip Celebi University.

MATERIALS AND METHODS

All patients had RME with an initial activation of two-quarter turns a day (0.5 mm) for an average of 8 days followed by 1 quarter turns per day for an average of 10 days. Disguised group allocation using opaque sealed envelopes was made with a computer-generated randomization program. The primary outcome was changes on the minimal nasal cross-sectional area (MCA). Secondary outcome included the assessment of nasal cavity volume. AR measurements were obtained at baseline (T0), immediately after the expansion (T1), and at 3 months-follow-up (T2). One-way analysis of variance (ANOVA) and Bonferroni test were used for inter-group comparison and two-way ANOVA was used for intra-group evaluation.

RESULTS

There were significant increases in MCA 1, 2 and nasal Vol in all groups after the treatment (95% [CI], P < 0.05) whereas in inter-group comparisons; MCA 1, 2 and nasal Vol, the changes were found to be similar (95% [CI], P > 0.05).

HARMS

No serious harm was observed except for mild gingivitis due to plaque accumulation.

CONCLUSIONS

RME treatment increased minimal nasal cross-sectional areas and nasal volume irrespective of appliance design.

TRIAL REGISTRATION

This trial was registered at Clinicaltrials.gov (Identifier NCT04529057).

PROTOCOL

The protocol was not published.

FUNDING

This trial was financed by Izmir Katip Celebi University, Scientific Research Projects Unit [grant number 2016-TDR-SABE-0024].

Posterior crossbite with mandibular asymmetry treated with lingual appliances, maxillary skeletal expanders, and alveolar bone miniscrews

Posterior crossbite and mandibular asymmetry affect esthetics and function. We report treatment of 3 patients with posterior crossbite with mandibular asymmetry but different anteroposterior and vertical characteristics. Treatment methods included maxillary skeletal expander, miniscrews, and lingual appliances. The results show that by using these appliances, ideal transverse, anteroposterior, and vertical control is possible in patients who have concerns about the esthetics of buccal appliances. Lingual appliances can provide satisfying results when combined with a maxillary skeletal expander and miniscrews in complex patients.

Observational Study Regarding Possible Side Effects of Miniscrew-Assisted Rapid Palatal Expander (MARPE) with or without the Use of Corticopuncture Therapy

Simple Summary

In this observational study, we evaluated possible complications at the skeletal and dentoalveolar level after palatal split using miniscrew-assisted rapid palatal expansion (MARPE) associated or not with corticopuncture (CP) therapy. The study included 27 patients with maxillary transverse deficiency and unilateral or bilateral cross-bite. Skeletal and dentoalveolar changes were evaluated using cone beam computed tomography (CBCT) images acquired before and after expansion. Changes of the occlusal planes were observed in 10 cases (37%). Maxillary canines tended to show symmetric buccal inclinations relative to the maxillary basal bone. Six patients; 22.22% showed hypertrophy/hyperplasia of the palatal mucosa associated with ulcerations, erythema, itching, and discomfort in the area. Swelling at the mid-palatal suture after split was observed in all cases and was caused by the resultant force. No cases of necrosis of the palatal mucosa were observed. Although occlusal modifications occur after palatal split, especially in unilateral cross-bite cases, these changes can be treated with the help of fixed orthodontic appliances.

Abstract

The use of maxillary expanders has the effect of distancing the maxillary bones at the level of the median palatal suture. During maxillary expansion, the main resistance forces occur at the zygomatico-maxillary sutures, and not in the median palatal suture, which is the basic principle on which this method is based. In this observational study, we evaluated possible complications at the skeletal and dentoalveolar level after palatal split using miniscrew-assisted rapid palatal expansion (MARPE) associated or not with corticopuncture (CP) therapy. The study included 27 patients with maxillary transverse deficiency and unilateral or bilateral cross-bite. Skeletal and dentoalveolar changes were evaluated using cone beam computed tomography (CBCT) images acquired before and after expansion. The mid-palatal suture was separated in 88.88% of cases, buccal bone height of the alveolar crest had decreased at first molar both at oral and palatal level by approximately 2.07 mm in 40.7% of cases whilst the remaining 59.3% showed insignificant bone loss, with canines exhibiting buccal tipping of 4.10° in 62.5% of cases. Changes of the occlusal planes were observed in 10 cases (37%). Maxillary canines tended to show symmetric buccal inclinations relative to the maxillary basal bone. Six patients; 22.22% showed hypertrophy/hyperplasia of the palatal mucosa associated with ulcerations, erythema, itching, and discomfort in the area. Swelling at the mid-palatal suture after split was observed in all cases and was caused by the resultant force. No cases of necrosis of the palatal mucosa were observed. Although occlusal modifications occur after palatal split, especially in unilateral cross-bite cases, these changes can be treated with the help of fixed orthodontic appliances.

Evaluating the effect of midpalatal corticotomy-assisted rapid maxillary expansion on the upper airway in young adults using computational fluid dynamics

Midpalatal corticotomy-assisted rapid maxillary expansion (MCRME) is a minimally invasive treatment of maxillary transverse deficiency (MTD) in young adults. However, the effect of MCRME on respiratory function still needs to be determined. In this study, we evaluated the changes in maxillary morphology and the upper airway following MCRME using computational fluid dynamics (CFD). Twenty patients with MTD (8 males, 12 females; mean age 20.55 years) had cone-beam computed tomography (CBCT) images taken before and after MCRME. The CBCT data were used to construct a three-dimensional (3D) upper airway model. The upper airway flow characteristics were simulated using CFD, and measurements were made based on the CBCT images and CFD. The results showed that the widths of the palatal bone and nasal cavity, and the intermolar width were increased significantly after MCRME. The volume of the nasal cavity and nasopharynx increased significantly, while there were no obvious changes in the volumes of the oropharynx and hypopharynx. CFD simulation of the upper airway showed that the pressure drop and maximum velocity of the upper airway decreased significantly after treatment. Our results suggest that in these young adults with MTD, increasing the maxillary width, upper airway volume, and quantity of airflow by MCRME substantially improved upper airway ventilation.

Nasomaxillary effects of miniscrew-assisted rapid palatal expansion and two surgically assisted rapid palatal expansion approaches

This retrospective study was performed to evaluate nasomaxillary changes in 36 patients at an advanced stage of skeletal maturity who underwent miniscrew-assisted rapid palatal expansion (MARPE) or surgically assisted rapid palatal expansion (SARPE) with/without an alar base cinch. Cone beam computed tomography images taken before and after expansion were analysed. Changes in the width of the dental arch (D66S, D66I), maxillary base (MxMol), and nasal floor and nasal cavity in the molar and canine regions (NaFMol, NaFCan, NaCMol, NaCCan) were compared, as well as changes in the choanal aperture (CA) and nasal soft tissue (NW). The MARPE technique produced smaller dental changes (D66S; P=0.025) and greater nasomaxillary expansion (MxMol, P=0.010; NaCMol, P=0.016; NaCCan, P=0.017; NaFMol, P=0.001; CA, P=0.002) than both SARPE techniques. Changes in NW did not differ significantly between the groups (P=0.200). MARPE uniformly increased the anterior and posterior widths of the nasal cavity. SARPE expanded the nasal cavity in a 'V-shape' pattern. Changes in the nasal cavity and choanal aperture related to the amount of dental arch expansion were greater for MARPE than for SARPE. All three approaches increased the width of the nasal soft tissue, although the cinch in SARPE limited this increase.

The role of micro-implant-assisted rapid palatal expansion (MARPE) in clinical orthodontics — a literature review

A maxillary transverse deficiency is a common craniofacial problem. Rapid palatal expansion (RPE) has been traditionally considered for the treatment of children and young adolescents, but this is not applicable in late adolescents or adults due to the ossification of facial sutures. A surgically assisted rapid palatal expansion (SARPE) was initially advocated for this group of patients, but the surgical procedure is associated with morbidity. As temporary anchorage devices (TADs) have been recently and popularly applied in clinical orthodontics, micro-implant-assisted rapid palatal expansion (MARPE) has been employed to facilitate maxillary expansion in skeletally mature patients. There have been various proposed MARPE designs and the outcomes appear promising. The aim of the present article is to discuss the role of MARPE in clinical orthodontics by reviewing its background, design, indications, treatment effects, stability, and limitations in the current literature. The treatment effects of two types of MARPE, bone-borne and tooth-bone-borne (hybrid), will be individually assessed.

Does Nasal Cavity Enlargement Associated With Respiratory Function Improvement After Surgically Assisted Rapid Maxillary Expansion?

PURPOSE

To systematically evaluate the effects of surgically assisted rapid maxillary expansion (SARME) on nasal cavity and its associated respiratory function changes.

MATERIAL AND METHODS

Multiple electronic databases were searched, authors were contacted as required, and reference lists of potentially relevant studies were screened. Articles that included patients older than 16 who had received SARME were considered. Data extraction and quality assessment were performed independently and in duplicate.

RESULTS

Eight articles, including 161 patients, were finally selected and analyzed. Nasal cavity significantly augmentation after SARME has been recognized by 7 studies with moderate-quality evidence. Among them, the nasal cavity volume increased <20% in 4 studies, 20% to 40% in 1 study, and >40% in 2 studies. Totally, the range of increasing in nasal cavity volume was 7.6% to 99%. One study had recorded the nasal expiratory and inspiratory flow significantly increased 18.5% and 21.7%, respectively.

CONCLUSION

SARME was found to produce meaningful volume augmentation in nasal cavity with adult patients. However, the improvement of nasal respiratory function has not been well elucidated; thus, SARME is not yet recommended for the purpose of improving nasal respiratory.

Surgically-assisted rapid maxillary expansion (SARME): indications, planning and treatment of severe maxillary deficiency in an adult patient

Introduction:

Maxillary deficiency, also called transverse deficiency of the maxilla, may be associated with posterior crossbite, as well as with other functional changes, particularly respiratory. In adult patients, because of bone maturation and the midpalatal suture fusion, rapid maxillary expansion has to be combined with a previous surgical procedure to release the areas of resistance of the maxilla. This procedure is known as surgically-assisted rapid maxillary expansion (SARME).

Objective:

This study discusses the indications, characteristics and effects of SARME, and presents a clinical case of transverse and sagittal skeletal maxillary discrepancy treated using SARME and orthodontic camouflage.

Stability and surgical complications of tooth-borne and bone-borne appliances in surgical assisted rapid maxillary expansion: a systematic review

The objective of this systematic review was to evaluate the stability and complications of tooth-borne (TB), bone-borne (BB) and hybrid (TB-BB) appliances in surgically assisted rapid maxillary expansion (SARME). Database searches were conducted (PubMed, Embase, Cochrane Library and SciELO), as well as a grey literature search (Google Scholar) and hand searches of reference lists. Forty-six articles were included after study selection (κ=0.854). After eligibility assessment, 16 articles and one article from the grey literature were processed (κ=0.866) and six articles were selected by hand searching, for a total of 23 articles included. Regarding stability, TB appliances showed width relapse rates ranging from 4 to 35% in canines, from 1 to 37% in premolars and from 0.2 to 49.5% in molars. In BB appliances, width relapse rates were 1.7-21% in canines, 1.5% in premolars and 4.6-11.5% in molars. In hybrid appliances, the width relapse rate was 14% in premolars, with a 1.8% overexpansion reported in the molar region. In TB and BB appliances, skeletal relapse rates were similar on the nasal floor (11-53% and 41.6%, respectively) and at the level of the maxilla (18% and 16%, respectively). The most common complications were bone resorption in TB appliances (18.14%) and appliance-related complications in BB appliances (17.9%). The risk of bias was high in 19 studies, medium in three studies and low in one study. The TB and BB appliances used in SARME were considered to have a high long-term stability. BB appliances appeared to have fewer relapses than TB appliances due to a more parallel distribution of forces exerted. However, relapse appears to be highly influenced by postorthodontic treatments, where arch-form coordination is achieved in the consolidation period with the purpose of overexpansion correction, alignment and final vertical adjustments. Further randomised controlled trials with long-term data and large sample sizes are needed to support evidence-based clinical decision-making and to allow meta-analytic studies of stability outcomes regarding the type of anchorage in SARME.

Comparison of dimensions and volume of upper airway before and after mini-implant assisted rapid maxillary expansion

OBJECTIVES

To evaluate changes in dimensions and volume of upper airway before and after mini-implant assisted rapid maxillary expansion (MARME) and observe correlations between changes of upper airway and vertical skeletal pattern in young adults.

MATERIALS AND METHODS

In this retrospective study, 22 patients (mean age, 22.6 ± 4.5 years; 4 male 18 female) with transverse discrepancy underwent MARME. Cone beam computed tomography was taken before and 3 months after expansion. Vertical and horizontal dimensions and volume of the nasal cavity, nasopharyngeal, retropalatal, retroglossal and hypopharyngeal airway were compared before and after MARME. Correlations between changed volume and dimensions were explored, as well as the vertical skeletal pattern.

RESULTS

Nasal osseous width, maxillary width, volume of the nasal cavity and nasopharynx increased significantly (P < .05). Enlarged nasopharyngeal volume correlated with increased nasal width at the PNS plane (P < .05). There were no correlations between expanded volume and maxillary width. No measurements except nasal cavity volume had a correlation with Sum angle. Increased maxillary width correlated negatively with hard palate thickness (P < .05).

CONCLUSIONS

(1) MARME caused an increase in volume of the nasal cavity and nasopharynx, with expansion of nasal osseous width and maxillary width. (2) Enlarged nasal width at the PNS plane contributed to the increase in nasopharynx volume. Enlarged maxillary width showed no direct relation with increased volume. (3) In this study, it was unclear about the association between changes of the upper airway and vertical skeletal pattern because of complex structures. (4) Palate thickness affected skeletal expansion of the maxilla in MARME.

Short-term impact of microimplant-assisted rapid palatal expansion on the nasal soft tissues in adults: A three-dimensional stereophotogrammetry study

Objective

The aim of this study was to evaluate changes in the nasal soft tissues, including movements of landmarks, changes in linear distances, and volumetric changes, using three-dimensional (3D) stereophotogrammetry after microimplant-assisted rapid palatal expansion (MARPE) in adult patients.

Methods

Facial data were scanned using a white light scanner before and after MARPE in 30 patients. In total, 7 mm of expansion was achieved over a 4-week expansion period. We determined 10 soft tissue landmarks using reverse engineering software and measured 3D vector changes at those points. In addition, we calculated the distances between points to determine changes in the width of the nasal soft tissues. The volumetric change in the nose was also measured.

Results

All landmarks except pronasale and subnasale showed statistically significant movement on the x-axis. Pronasale, subnasale, alar right, and alar left showed significant movement on the y-axis, while all landmarks except subnasale showed significant movement on the z-axis. The alar base width, alar width, and alar curvature width increased by 1.214, 0.932, and 0.987 mm, respectively. The average volumetric change was 993.33 mm³, and the amount of increase relative to the average initial volume was 2.96%.

Conclusions

The majority of soft tissue landmarks around the nasal region show significant positional changes after MARPE in adults. The nose tends to widen and move forward and downward. The post-treatment nasal volume may also exhibit a significant increase relative to the initial volume. Clinicians should thoroughly explain the anticipated changes to patients before MARPE initiation.

Distraction Osteogenesis Maxillary Expansion (DOME) for adult obstructive sleep apnea patients with narrow maxilla and nasal floor

OBJECTIVES

This study correlates objective and subjective measurements associated with obstructive sleep apnea (OSA) to define the efficacy of Distraction Osteogenesis Maxillary Expansion (DOME) to treat adult OSA patients with narrow maxilla and nasal floor.

METHODS

This is a retrospective study reviewing cases from September 2014 through April 2018 with 75 eligible subjects. Inclusion criteria required OSA confirmed by attended polysomnography (PSG). Pre- and Post-operative clinical data were measured at the Stanford Sleep Medicine and Stanford Sleep Surgery Clinics. DOME is a two-step process starting with insertion of custom-fabricated maxillary expanders anchored to the hard palate by mini-implants followed by minimally invasive osteotomies. After maxillary expansion was complete, orthodontic treatment to restore normal occlusion was initiated. Perioperative Apnea-Hypopnea Index (AHI), Epworth Sleepiness Scale (ESS), Nasal Obstruction Symptom Evaluation (NOSE), and Oxygen Desaturation Index (ODI) were measured for 43, 72, 72, and 34 subjects respectively. Statistical analysis was performed using paired T-test with significance set at p-value < 0.05.

RESULTS

The mean age of test subjects was 30.5 ± 8.5 years with a gender distribution of 57 males and 18 females. There was a significant reduction in pre and post-operative NOSE score (10.94 ± 5.51 to 3.28 ± 2.89, p < 0.0001), mean ESS score (10.48 ± 5.4 to 6.69 ± 4.75, p < 0.0001), and AHI (17.65 ± 19.30 to 8.17 ± 8.47, p < 0.0001) with an increased percentage of REM sleep (14.4 ± 8.3% to 22.7 ± 6.6%, p = 0.0014). No significant adverse effects were identified.

CONCLUSIONS

DOME treatment reduced the severity of OSA, refractory nasal obstruction, daytime somnolence, and increased the percentage of REM sleep in this selected cohort of adults OSA patients with narrow maxilla and nasal floor.

Endoscopically-assisted surgical expansion (EASE) for the treatment of obstructive sleep apnea

OBJECTIVE

The aim of this retrospective study was to evaluate the results of an outpatient surgical procedure known as endoscopically-assisted surgical expansion (EASE) in expanding the maxilla to treat obstructive sleep apnea (OSA) in adolescent and adults.

METHODS

Thirty-three patients (18 males), aged 15-61 years, underwent EASE of the maxilla. All patients completed pre- and post-operative clinical evaluations, polysomnography, questionnaires (Epworth Sleepiness Scale [ESS] and Nasal Obstruction Septoplasty Questionnaire [NOSE]) as well as cone beam computed tomography (CBCT).

RESULTS

With EASE, the overall apnea hypopnea index (AHI) improved from 31.6 ± 11.3 to 10.1 ± 6.3. The oxygen desaturation index (ODI) improved from 11.8 ± 9.6 to 1.8 ± 3.7, with reduction of ESS scores from 13.4 ± 4.0 to 6.7 ± 3.1. Nasal breathing improved as demonstrated by reduction of the NOSE scores from 57.8 ± 12.9 to 15.6 ± 5.7. Expansion of the airway from widening of the nasal floor was consistently evident on all postoperative CBCT; the anterior nasal floor expanded 4.9 ± 1.2 mm, posterior nasal floor expanded 5.6 ± 1.2 mm, and the dental diastema created was 2.3 ± 0.8 mm. Mean operative time was 54.0 ± 6.0 min. All patients with mild to moderate OSA were discharged the same day; patients with severe OSA were observed overnight. All patients returned to school or work and regular activities within three days.

CONCLUSIONS

EASE is an outpatient procedure that improves nasal breathing and OSA by widening the nasal floor in adolescents and adults. Compared to current surgical approaches for maxillary expansion, EASE is considerably less invasive and consistently achieves enlargement of the airway with minimal complications.

Assessment of changes in the nasal airway after nonsurgical miniscrew-assisted rapid maxillary expansion in young adults

OBJECTIVES

To evaluate changes in the volume and cross-sectional area of the nasal airway before and 1 year after nonsurgical miniscrew-assisted rapid maxillary expansion (MARME) in young adults.

MATERIALS AND METHODS

Fourteen patients (mean age, 22.7 years; 10 women, four men) with a transverse discrepancy who underwent cone beam computed tomography before (T0), immediately after (T1), and 1 year after (T2) expansion were retrospectively included in this study. The volume of the nasal cavity and nasopharynx and the cross-sectional area of the anterior, middle, and posterior segments of the nasal airway were measured and compared among the three timepoints using paired t-tests.

RESULTS

The volume of the nasal cavity showed a significant increase at T1 and T2 ( P < .05), while that of the nasopharynx increased only at T2 ( P < .05). The anterior and middle cross-sectional areas significantly increased at T1 and T2 ( P < .05), while the posterior cross-sectional area showed no significant change throughout the observation period ( P > .05).

CONCLUSIONS

The results demonstrate that the volume and cross-sectional area of the nasal cavity increased after MARME and were maintained at 1 year after expansion. Therefore, MARME may be helpful in expanding the nasal airway.

The value of cone beam computed tomography imaging in surgically assisted rapid palatal expansion: a systematic review of the literature

This study aimed to evaluate the reliability of cone-beam computed tomography (CBCT) imaging of the maxillary structures and the postoperative dentoskeletal, nasal airway, periodontal, and facial soft tissue changes after surgically assisted rapid palatal expansion (SARPE). A systematic review of the literature on CBCT analysis of SARPE was performed. The PubMed, Embase, and Cochrane Library databases were searched. Nine articles were included, involving a total of 228 patients. The general trend was tooth-borne distraction with pterygomaxillary dysjunction. A systematic increase in all transverse dimensions at the dentoalveolar and dental levels, as well as a certain degree of tipping and extrusion of the anchorage teeth and tipping of the skeletal segments, was detected. Soft tissue findings reflected the underlying dentoalveolar changes. A decrease in the buccal alveolar bone thickness and alveolar crest level occurred. Results confirm that CBCT is an accurate and reliable method to assess anatomical changes after SARPE. Although this systematic review provides valuable preliminary information about the effects of SARPE, results should be interpreted with caution due to the low level of evidence of the publications, great heterogeneity among study groups regarding outcome variables and surgical-orthodontic protocols, and lack of long-term data.

Stress and displacement pattern evaluation using two different palatal expanders in unilateral cleft lip and palate: a three-dimensional finite element analysis

Background

In this finite element (FE) study, the stress distribution and displacement pattern was evaluated in the mid-palatal area and around circum-maxillary sutures exerted by bone-borne palatal expander (BBPE) in comparison with conventional HYRAX rapid palatal expander in unilateral cleft lip and palate.

Methods

Computed tomography scan images of a patient with unilateral cleft palate was used to create a FE model of the maxillary bone along with circum-maxillary sutures. A three-dimensional model of the conventional HYRAX (Hygienic Rapid Expander) expander and custom-made BBPE was created by laser scanning and programmed into the FE model.

Results

With the BBPE, the maximum stress was observed at the implant insertion site, whereas with the conventional HYRAX expander, it was at the dentition level. Among the circum-maxillary sutures, the zygomaticomaxillary suture experienced maximum stress followed by the zygomaticotemporal and nasomaxillary sutures. Displacement in the X-axis (transverse) was highest on the cleft side, and in the Y-axis (antero-posterior), it was highest in the posterior region in the BBPE.

Conclusions

The total displacement was observed maximum in the mid-palatal cleft area in the BBPE, and it produced true skeletal expansion at the alveolar level without any dental tipping when compared with the conventional HYRAX expander.

Surgically assisted rapid maxillary expansion (SARME) with or without intraoperative releasing of the nasal septum

OBJECTIVE

To assess nasal septum deviation after surgically assisted rapid maxillary expansion (SARME) with or without intraoperative releasing of the nasal septum.

STUDY DESIGN

A total of 20 consecutive adult patients with transverse maxillary deficiency underwent SARME with intraoperative releasing (n = 10) or nonreleasing (n = 10) of the nasal septum. Cone beam computed tomography scans were obtained immediately after surgery (T1), after the end of distraction (T2), and 6 months after SARME (T3). Deviation of the nasal septum was evaluated by angular measurements on superimposed cone beam computed tomography images from T1 to T3. Moreover, visible nasal septum deviation was assessed by using superimposed clinical photos obtained preoperatively (CP1) and before second-stage surgery (CP2).

RESULTS

No significant differences were found between releasing and nonreleasing of the nasal septum in angular radiographic measurements from T1 to T3 (0 degrees; 95% confidence interval -0.62 to 0.62; P = .5) or visible nasal deviation from CP1 to CP2 (-0.14 degrees; 95% confidence interval -0.64 to 0.36; P = .28).

CONCLUSIONS

The results of the present study indicate that there is no need for intraoperative releasing of the nasal septum during SARME. However, further randomized studies based on large patient groups are needed before final conclusions on this topic can be reached.

The effects of surgical expansion of the maxillary arch and its consequences for the incisor axis

PURPOSE

Reduced transverse maxillary dental arch width may be treated either by surgically supported rapid maxillary expansion (SRME) with conservative orthodontic appliances or by means of Le Fort I osteotomy (LFIO). Both are means of transverse maxillary expansion.

METHODS

Both surgical methods (SRME and LFIO) were evaluated with regard to the presurgical and postsurgical form of the maxillary dental arch and its consequences for the incisor axis by means of 32 dental casts and cephalometric analysis.

RESULTS

In both groups, anterior and posterior dental arch width showed significant changes after surgery, but changes in anterior dental arch width were less significant after LFIO (p = 0.004) than after SRME (p < 0.000; t-test). Cephalometric analysis (OK1/N1) did not show any significant differences between the two surgical methods (p = 0.1266; t-test). Anterior arch length was not reduced after LFIO but significantly reduced after SRME. Thus, the ideal elliptical shape of the dental arch was lost in the SRME group, which may impede esthetic outcome of the maxillary dental arch.

CONCLUSION

Le Fort I osteotomy achieving direct transverse expansion should be favored over surgically supported rapid maxillary expansion if transverse expansion does not exceed 7 mm.

Effect of Surgically Assisted Rapid Maxillary Expansion on Upper Airway Volume: A Systematic Review

PURPOSE

Surgically assisted rapid maxillary expansion (SARME) is required in non-growing patients when maturity or resistance precludes desired sutural separation by noninvasive techniques. The aim of this review was to determine what volumetric changes occur in the upper airway spaces after SARME in adults.

MATERIALS AND METHODS

A systematic review was performed with data assessed for suitability of meta-analysis. The primary outcome measurement of volumetric changes in an upper airway space was sought in non-growing patients undergoing SARME. Electronic database searches were performed for published literature in Medline (by Ovid), Pre-Medline, Old Medline, Embase, and the Cochrane Central Register of Controlled Trials (CENTRAL) spanning all available years to August 1, 2015. Unpublished literature was searched electronically through ClinicalTrials.gov and the National Research Register. Additional hand searching of reference lists of relevant articles, grey searching, and expert correspondence was conducted for any additional studies. Two authors independently screened search results, extracted data, and assessed the risk of bias of included studies.

RESULTS

Twenty-one studies were located by initial screening; 10 were excluded after full-text review, leaving 11 studies eligible that met all inclusion criteria for this systematic review. In total, 204 treated patients (mean age, 18 to 31 yr) were included in the qualitative synthesis. Ten studies evaluated nasal cavity volume, 2 evaluated palatal volume, and 1 evaluated oropharyngeal volume. Appliances used included tooth-borne hyrax and transpalatal distractor devices.

CONCLUSIONS

SARME was found to produce substantial short-term volume increases in the nasal cavity in non-growing patients that were maintained for at least 63 months. Evidence weakly suggested no effect on oropharyngeal volume. However, most studies were evaluated as having a high risk of bias. The effect of such volume changes on respiratory function still needs to be determined; thus, SARME cannot be recommended for respiratory purposes.

The effects of micro-implant assisted rapid palatal expansion (MARPE) on the nasomaxillary complex--a finite element method (FEM) analysis

Background

Orthodontic palatal expansion appliances have been widely used with satisfactory and, most often, predictable clinical results. Recently, clinicians have successfully utilized micro-implants with palatal expander designs to work as anchors to the palate to achieve more efficient skeletal expansion and to decrease undesired dental effects. The purpose of the study was to use finite element method (FEM) to determine the stress distribution and displacement within the craniofacial complex when simulated conventional and micro-implant-assisted rapid palatal expansion (MARPE) expansion forces are applied to the maxilla. The simulated stress distribution produced within the palate and maxillary buttresses in addition to the displacement and rotation of the maxilla could then be analyzed to determine if micro-implants aid in skeletal expansion.

Methods

A three-dimensional (3D) mesh model of the cranium with associated maxillary sutures was developed using computed tomography (CT) images and Mimics modeling software. To compare transverse expansion stresses in rapid palatal expansion (RPE) and MARPE, expansion forces were distributed to differing points on the maxilla and evaluated with ANSYS simulation software.

Results

The stresses distributed from forces applied to the maxillary teeth are distributed mainly along the trajectories of the three maxillary buttresses. In comparison, the MARPE showed tension and compression directed to the palate, while showing less rotation, and tipping of the maxillary complex. In addition, the conventional hyrax displayed a rotation of the maxilla around the teeth as opposed to the midpalatal suture of the MARPE. This data suggests that the MARPE causes the maxilla to bend laterally, while preventing unwanted rotation of the complex.

Conclusions

In conclusion, the MARPE may be beneficial for hyperdivergent patients, or those that have already experienced closure of the midpalatal suture, who require palatal expansion and would worsen from buccal tipping of the teeth or maxillary complex.

Density of the midpalatal suture after RME treatment - a retrospective comparative low-dose CT-study

Introduction

Rapid maxillary expansion (RME) is a common technique to improve the dental and skeletal transverse width in cases of constricted maxillary arches. Although retention after RME has been widely examined, there is still no clear statement about the minimal retention time in postpubertal patients and many practitioners have retention concepts varying between three and six months.

Methods

This retrospective study consisted of 14 patients who were either treated with a Haas-type RME (6 patients) or a Hybrid-RME (8 patients). The average age was 15.8 years (min. 13.5 years, max. 23.0 years).

Low-dose CT scans were taken initially before placement of the RME (T0), directly after maximal activation (T1) and (in six cases) also in retention after 6 months (T2). Using a 3D-software (“OnDemand3D”/Cybermed Inc.) in analogy to the method published by Franchi et al. (AJODO Volume 137/ Number 4) all values were measured twice at an interval of 1 month to assess the method error and the intraoperator reliability.

Statistical analysis was performed using SPSS 21 for Mac. Possible influences of the RME-type were assessed using the univariate ANOVA. Changes in the sutural density between the different points of time were examined using paired t-tests.

Results

The density of the suture decreased significantly after expansion (T0-T1) with both types of RME (p = 0.000). In the retention period there was a significant increase of the sutural density (p = 0.007) although it did not achieve the initial level (p = 0.002).

Conclusions

1. The midpalatal suture was opened in all analysed patients.

2. In postpubertal patients a retention time of six months does not allow sufficient reorganization of the suture.

3. Therefore, a retention period longer than six months seems to be beneficial to prevent relapses in postpubertal patients.

Three-dimensional evaluation of upper airway following rapid maxillary expansion: a CBCT study

OBJECTIVES

To evaluate, by using cone beam computed tomography, the skeletal, dental, oropharyngeal (OP) airway volume, and nasal passage (NP) volume changes that occur after rapid maxillary expansion (RME).

MATERIALS AND METHODS

Two groups were selected, each with 35 patients (15 males, 20 females), an RME group (mean age, 14.02 ± 1.46 years) and a control group (mean age, 14.10 ± 1.44 years). The RME group consisted of patients with maxillary constriction who were treated with Hyrax palatal expanders, and the control group comprised age- and sex-matched patients who underwent comprehensive orthodontic treatment without the use of a rapid maxillary expander.

RESULTS

All of the transverse skeletal (medial orbital width, lateral nasal width, maxillary width, and mandibular width) and interdental (intermolar, interpremolar, and intercanine) parameters were significantly enlarged in the RME group. A statistically significant increase in airway variables was seen in both groups between pretreatment (T0) and final records (T1). The mean increase of NP airway volume for the RME group (1719.9 ± 1510.7 mm(3)) was twofold compared with the control group (813.6 ± 1006.7 mm(3)), and no intergroup significant difference was found for the OP volume.

CONCLUSIONS

Rapid maxillary expansion creates a significant increase in nasal passage airway volume but no significant change in the oropharyngeal airway volume.

Changes in CT cerebral blood flow and volume associated with rapid maxillary expansion in a rabbit model

OBJECTIVE

To evaluate hemodynamic changes of the brain under the high forces of a rapid maxillary expansion (RME) appliance in a rabbit model.

MATERIALS AND METHODS

Twenty-four male New Zealand white rabbits were selected (12 weeks old, mean weight 3.01 ± 0.22 kg). A modified acrylic resin bonded RME appliance was used for expansion. A series of perfusion computed tomography examinations was performed before expansion (T0), on the fifth day of expansion (T1), at the end of the expansion process (T2), and after 10 days of retention (T3). Cerebral blood flow, cerebral blood volume, and mean transit time maps were recorded and parametrics evaluated. Statistical analyses were performed with analysis of variance with post hoc tests.

RESULTS

Mean cerebral blood flow showed an increase from T0 to T2 and then a decrease from T2 to T3, but the change was not statistically significant. Mean cerebral blood volume and mean transit time increased significantly from T0 to T2, and all perfusion parameters increased from T0 to T3.

CONCLUSIONS

RME is a safe orthopedic method despite the high expansion force. Perfusion computed tomography is effective for evaluating the hemodynamic changes of the brain caused by some orthopedic therapies. The increase in both cerebral blood volume and cerebral blood flow may help to explain why RME could alleviate the symptoms of enuretic children.