Midpalatal suture density ratio: A novel predictor of skeletal response to rapid maxillary expansion

Ultrasonic mapping of midpalatal suture - An ex-vivo study

OBJECTIVE

Rapid maxillary expansion is a common orthodontic procedure to correct maxillary constriction. Assessing the midpalatal suture (MPS) expansion plays a crucial role in treatment planning to determine its effectiveness. The objectives of this preliminary investigation are to demonstrate a proof of concept that the palatal bone underlying the rugae can be clearly imaged by ultrasound (US) and the reconstructed axial view of the US image accurately maps the MPS patency.

METHODS

An ex-vivo US scanning was conducted on the upper jawbones of two piglet's carcasses before and after the creation of bone defects, which simulated the suture opening. The planar images were processed to enhance bone intensity distribution before being orderly stacked to fuse into a volume. Graph-cut segmentation was applied to delineate the palatal bone to generate a bone volume. The accuracy of the reconstructed bone volume and the suture opening was validated by the micro-computed tomography (µCT) data used as the ground truth and compared with cone beam computed tomography (CBCT) data as the clinical standard. Also included in the comparison is the rugae thickness. Correlation and Bland-Altman plots were used to test the agreement between the two methods: US versus µCT/CBCT.

RESULTS

The reconstruction of the US palatal bone volumes was accurate based on surface topography comparison with a mean error of 0.19 mm for pre-defect and 0.15 mm and 0.09 mm for post-defect models of the two samples, respectively when compared with µCT volumes. A strong correlation (R2 ≥ 0.99) in measuring MPS expansion was found between US and µCT/CBCT with MADs of less than 0.05 mm, 0.11 mm and 0.23 mm for US, µCT and CBCT, respectively.

CONCLUSIONS

It was possible to axially image the MPS opening and rugae thickness accurately using high-frequency ultrasound.

CLINICAL SIGNIFICANCE

This study introduces an ionizing radiation-free, low-cost, and portable technique to accurately image a difficult part of oral cavity anatomy. The advantages of conceivable visualization could promise a successful clinical examination of MPS to support the predictable treatment outcome of maxillary transverse deficiency.

Evaluation of Bone Thickness and Density Values in Resistance Regions in Rapid Maxillary Expansion Using Computed Tomography

OBJECTIVES

This study used computed tomography (CT) to compare the bone thickness and density values around the zygomaticomaxillary, zygomaticotemporal, and pterygomaxillary sutures that are resistant to rapid maxillary expansion (RME) treatment according to age, sex, and cervical vertebrae maturation (CVM) stage.

METHODS

The study included 200 paranasal sinus records obtained for medical diagnosis and examination in a radiology clinic. The records provided data on 110 males and 90 females aged between 4 and 28 years. Bone thickness and density values around the zygomaticomaxillary, zygomaticotemporal, and pterygomaxillary sutures were measured using CT imaging. The correlations of bone thickness and density values with the variables of age, sex, and CVM stage were evaluated.

RESULTS

No statistically significant difference was revealed between the bone thickness values around the zygomaticomaxillary and zygomaticotemporal sutures and age, sex, CVM stage, and the right and left regions of the same individual ( P >0.05). A strong correlation was identified between Hounsfield units (Hu) values on bone density in all 3 regions and age and sex ( P <0.001). No correlation was found between the CVM stage and density values around the zygomaticomaxillary, zygomaticotemporal, and pterygomaxillary sutures ( P >0.05).

CONCLUSIONS

The Hu values of the records from females were higher than those of males in all age groups. It was observed that with increasing age, bone density values increased in all 3 regions, and thus circummaxillary region's Hu value increased.

Midpalatal suture maturation in 15- to 35-year-olds: morphological assessment in the coronal plane using CBCT-an exploratory study

Rapid maxillary expansion (RME) is used in patients presenting transverse maxillary deficiency. However, RME may be unpredictable after late adolescence if the midpalatal sutural maturation stage (MPMS) is in late stage. Since MPMS evaluation is influenced by the expertise of the operator and image quality, this classification method could be complemented. Therefore, this study aimed to analyze the morphology of the midpalatal suture (MPS) and its surrounding bone in the coronal plane using cone beam computed tomography (CBCT) images of adolescents and young adults and to correlate the findings with their respective MPMS status. CBCT scans of 200 patients aged 15-35 years of both sexes were evaluated. MPS and surrounding bone tissue characteristics in the coronal and axial sections were analyzed, and MPMS was evaluated (A to E). Six categories were identified for the coronal evaluation, analyzing it in 2 standardized locations. Sutural morphology: I, hypodense sutural line limited by 2 hyper-dense para-sutural lines; II, hypodense sutural line; and III, suture not visible. The presence of para-sutural cancellous bone: CB0, compact bone; CB1, dense cancellous tissue; CB2, spaced cancellous bone. Midpalatal bone thickness (MBTh) was also measured. ANOVA-Bonferroni, chi-square, logistic regression and t-tests were used. MPMS increased with age. Sutural morphology I and CB0 bone were the most prevalent. Here we show that sutural morphology, para-sutural bone characteristics, and MPSM were significantly associated. The coronal evaluation of the MPS can complement the information from the MPSM assessment, allowing the identification of patent MPS even in the presence of late MPSM.

Applicability of Fractal Analysis for Quantitative Evaluation of Midpalatal Suture Maturation

BACKGROUND

The treatment of transversal maxillary deficiency usually aims at skeletal expansion. The treatment option highly depends on the maturation stage of the midpalatal suture (MPS), which may vary between individuals at the same chronological age. Therefore, the individual determination of the MPS maturation is crucial.

AIMS

Our aim was to investigate the applicability of fractal analysis for the quantitative evaluation of MPS maturation.

METHODS

Nine experienced orthodontists were asked to evaluate the MPS maturation on 51 cone beam computed tomography (CBCT) scans according to the Angelieri classification method. Intra- and inter-examiner reliability was measured using Cohen's Kappa coefficient. The stages were agreed upon according to the results of the examiners with the highest strength of agreement. Fractal analysis was then performed on the CBCTs and the correlation between the fractal dimension values and maturation stages was then evaluated. Optimal fractal dimension cut-off values were determined using a receiver operating characteristic curve.

RESULTS

The cut-off point was found at 1.073, at which the use of fractal dimension for predicting MPS maturation showed 100% sensitivity, 93.7% specificity, 9.5% false positive, 0% false negative rate.

CONCLUSION

Our results provided further evidence that fractal analysis is a reliable tool to determine MPS maturation stage.

Midpalatal Suture Maturation Stage in 10- to 25-Year-Olds Using Cone-Beam Computed Tomography-A Cross-Sectional Study

In this study, we aimed to evaluate the frequency of midpalatal maturational stages in a Chilean urban sample of adolescents, post-adolescents and young adults, associated with chronological age and sex, by assessing CBCT scan images. Tomographic images in axial sections of the midpalatal sutures from 116 adolescents and young adults (61 females and 55 males, 10-25 years old) were classified according to their morphologic characteristics in five maturational stages (A, B, C, D and E), as proposed by Angelieri et al. The sample was divided into three groups: adolescents, post-adolescents and young adults. Three previously calibrated examiners (radiologist, orthodontist and general dentist) analyzed and classified the images. Stages A, B and C were considered to be an open midpalatal suture, and D and E were considered to be a partially or totally closed midpalatal suture. The most frequent stage of maturation was D (37.9%), followed by C (24%) and E (19.6%). The possibility of finding closed midpalatal sutures in individuals of 10 to 15 years was 58.4%, and in subjects aged 16 to 20 and 21 to 25 years, it was 51.7% and 61.7%, respectively. In males, Stages D and E were present in 45.4%; for females, this prevalence was 68.8%. Individual assessment of the midpalatal suture in each patient is of crucial importance before making the clinical decision of which is the best maxillary expansion method. Due to the extensive calibration and training required, it is advisable to always request a report from a radiologist. Individual evaluation with 3D imaging is recommended because of the great variability observed in the ossification of midpalatal sutures in adolescents, post-adolescents and young adults.

Analysis of factors associated with the success of microimplant-assisted rapid palatal expansion

INTRODUCTION

Success-related factors of microimplant-assisted rapid palatal expansion (MARPE) were evaluated, including age, palatal depth, suture, and parassutural bone thickness, suture density and maturation, and the relation to corticopuncture (CP) technique, as well as skeletal and dental effects.

METHODS

Sixty-six cone-beam computed tomography scans were analyzed before and after rapid maxillary expansion procedures in 33 patients aged 18-52 years for both sexes. The scans were generated in digital imaging and communications in medicine file format and analyzed in the multiplanar reconstruction of the regions of interest. Palatal depth, suture thickness, density and maturation, age, and CP were assessed. To evaluate dental and skeletal effects, the sample was divided into 4 groups: successful MARPE (SM), SM + CP technique (SMCP), failure MARPE (FM), and FM + CP (FMCP).

RESULTS

Successful groups presented more skeletal expansion and dental tipping than failure groups (P <0.05). The mean age of the FMCP group was significantly higher than the SM groups; suture and parassutural thickness significantly related to the success, and patients who received CP showed a success rate of 81.2% compared with 33.3% in the no CP group (P <0.05). Suture density and palatal depth did not show a difference between the success and failure groups. Suture maturation was higher in SMCP and FM groups (P <0.05).

CONCLUSIONS

Older age, thin palatal bone, and higher stage of maturation can influence the success of MARPE. CP technique in these patients appears to have a positive impact, increasing the chance of treatment success.

Clinical advances in maxillary skeletal expansion and introduction of a new MARPE concept

BACKGROUND

Transverse maxillary deficiency, typically characterized by the clinical manifestations of unilateral or bilateral crossbite, is a common orthodontic discrepancy. The primary goal of maxillary expansion should be to obtain a nearly maximum width increase in the basal bone of the constricted maxilla and to avoid the dental expansion of the anchor teeth. The introduction of miniscrew anchorage-supported rapid maxillary expansion (MARPE) devices has helped increase the feasibility of obtaining nonsurgical transverse correction in late adolescents and young adults with optimum orthopedic effects. However, the success rate of MARPE shows a negative correlation with age. Although MARPE offers an effective method for correcting a transverse skeletal deficiency, given the appliance cost and increased risk for complications, it could present challenges for adult patients and practitioners in daily practice.

AIMS

In this article, current advances in maxillary skeletal expansion are summarized, and a new MARPE concept is introduced.

CONCLUSION

The new MARPE design offers several advantages to other existing methods: (1) it can be installed directly to the patient in the clinical setting with no additional laboratory waiting times. (2) It is purely a bone-borne appliance. (3) The appliance is designed to be placed in the thickest part of the anterior palate to maximize the cortical and trabecular bone support. (4) Allows for bicortical placement of the miniscrews with no perforations in the nasal floor. Finally, (5) offers an esthetic and minimalistic approach to maxillary skeletal expansion in late adolescent and adult patients.

Factors related to microimplant-assisted rapid palatal expansion in teenagers and young adults: A cone-beam computed tomography study

INTRODUCTION

For patients with maxillary transverse deficiency, selecting an appropriate therapeutic method is important for the treatment effect and prognosis. Our study aimed to explore factors related to microimplant-assisted rapid palatal expansion (MARPE) in teenagers and young adults using cone-beam computed tomography.

METHODS

Twenty-five patients who underwent MARPE were included in this retrospective study from February 2014 to June 2019. Midpalatal suture density (MPSD) ratio, midpalatal suture maturation (MPSM), bone effect, dentoalveolar effect, and dental effect in maxillary first molar were evaluated using cone-beam computed tomography. Spearman correlation analysis was used to analyze the correlation between the MPSD ratio, MPSM, age, and the expansion amount generated by MARPE.

RESULTS

Twenty-five patients (mean age, 19.84 ± 3.96 years; range, 15-29 years) with maxillary transverse deficiency were analyzed. Age was negatively correlated with bone expansion, alveolar expansion, and alveolar change (all P <0.05). There was a negative correlation between MPSM and nasal cavity variation, bone expansion, and alveolar change (all P <0.05). The bone expansion was negatively correlated with MPSD ratio 3 (r = -0.417; P <0.05) and MPSD ratio 4 (all P <0.05).

CONCLUSIONS

Age, MPSM, and MPSD ratio were significantly related to the MARPE effect. Age, MPSM, and MPSD ratio should be considered when choosing MARPE.

Midpalatal Suture Maturation Method for the Assessment of Maturation before Maxillary Expansion: A Systematic Review

Assessment of midpalatal suture maturation is crucial before deciding which type of maxillary expansion technique will be performed to treat transverse discrepancies. In 2013, Angelieri et al. proposed a new method to evaluate midpalatal maturation using cone-beam computed tomography. The aim of this study was to systematically identify, evaluate, and provide a synthesis of the existing literature about this new method and to rigorously assess the methodological quality of these articles. A bibliographic search was carried out using PubMed, Cochrane Library, SciELO, LILACS, Web of Science, and Scopus using the terms midpalatal suture, cranial sutures, palate, maturation, interdigitation, ossification, maxillary expansion, evaluation, assessment, and assess. Quality assessment was performed using the Observational Cohort and Cross-Sectional Studies tool developed by the National Heart, Lung, and Blood Institute. Hence, 56 articles were obtained, of which only 10 met the selection criteria. We could not include any of the data into an analysis because of the large variation of the data collected and high methodological heterogeneity found among studies. Of all the studies included, 10% had poor quality, 70% fair, and 20% good quality, respectively. Even though age and sex play a role in midpalatal suture obliteration, there is a poor correlation between these variables. Thus, every patient should be assessed individually before choosing the best protocol for maxillary expansion. The midpalatal suture maturation method has the potential to be used for diagnostic purposes, but clinicians should be cautious of routinely using it because an extensive training and calibration program should be performed prior.

Age, Sex, and Maxillary Position Are Associated with Successful Microimplant-Assisted Rapid Palatal Expansion in Adults

The purpose of this study was to investigate the possible predictors of success of microimplant-assisted rapid palatal expansion (MARPE) in skeletally mature patients. Additionally, factors associated with the amount of maxillary expansion were analyzed. Factors associated with MARPE success were analyzed in 53 adult patients (27 males, 26 females, mean age 25.8 ± 8.9 years, and range 18.0 to 56.6 years) who had a maxillary transverse deficiency greater than 2 mm and a cervical vertebral maturation stage of 6. Age at pretreatment (T1), sex, sutural bone density at T1, type of appliance, mode of microimplant fixation, and lateral cephalometric variables at T1 were considered for inclusion as predictors for MARPE success. In patients who showed successful maxillary skeletal expansion, the linear distances of maxillary widths were measured on cone-beam-computed-tomography images at T1 and after MARPE (T2), and factors associated with the amount of expansion were analyzed. In total, 41 of the 53 patients showed successful maxillary expansion. Age (p = 0.019), sex (p = 0.002), and A-N perp (p = 0.015) were significantly associated with the success of MARPE. The factors associated with the amount of maxillary skeletal expansion were SN-MP and midpalatal-suture density at T1. In conclusion, there is a greater chance of failure in male patients who are older and have maxillary retrusion. A greater amount of maxillary expansion can be expected in patients with a higher mandibular-plane angle and with lower midpalatal-suture density.

Midpalatal Suture CBCT Image Quantitive Characteristics Analysis Based on Machine Learning Algorithm Construction and Optimization

Background: Midpalatal suture maturation and ossification status is the basis for appraising maxillary transverse developmental status. Methods: We established a midpalatal suture cone-beam computed tomography (CBCT) normalized database of the growth population, including 1006 CBCT files from 690 participants younger than 24 years old. The midpalatal suture region of interest (ROI) labeling was completed by two experienced clinical experts. The CBCT image fusion algorithm and image texture feature analysis algorithm were constructed and optimized. The age range prediction convolutional neural network (CNN) was conducted and tested. Results: The midpalatal suture fusion images contain complete semantic information for appraising midpalatal suture maturation and ossification status during the fast growth and development period. Correlation and homogeneity are the two texture features with the strongest relevance to chronological age. The overall performance of the age range prediction CNN model is satisfactory, especially in the 4 to 10 years range and the 17 to 23 years range, while for the 13 to 14 years range, the model performance is compromised. Conclusions: The image fusion algorithm can help show the overall perspective of the midpalatal suture in one fused image effectively. Furthermore, clinical decisions for maxillary transverse deficiency should be appraised by midpalatal suture image features directly rather than by age, especially in the 13 to 14 years range.

Midpalatal suture maturation staging using cone beam computed tomography in patients aged between 9 to 21 years

Midpalatal suture was analysed with cone beam computed tomography to identify its maturation with respect to age and maxillary-complex growth in 72 patients 9- to 21-year-old. Maxillary-complex was divided in premaxillary, maxillary, and palatine segment. Interdigitation and ossification of midpalatal suture, its density relative to hard tissues and soft tissues, and midpalatal suture density ratio were measured for each segment. Correlation of each parameter with age and maxillary-complex length was analysed, and classification trees were developed for staging parameters. Midpalatal suture maturation stages (MPSMS, from A to E) were applied to assess relationship with age and maxillary-complex length. Regarding age, ossification increased in maxillary segment of males (r_S = 0.39, p = 0.032), while suture density relative to soft tissues increased in maxillary (r_S = 0.37, p = 0.042) and palatine segments (r_S = 0.41, p = 0.027) of males and in palatine segment of females (r_S = 0.32, p = 0.041). In males, suture density relative to soft tissues discriminated two age-stages (p = 0.024), and the same parameter (p = 0.023) paired with ossification (p = 0.027) discriminated two length-stages. MPSMS identified length-differences between stage A and B in females (p = 0.001). Midpalatal-suture ossification and its density relative to soft tissues showed some relationship with age and maxillary-complex length, especially in males. However, challenging staging and limitations in the imaging method may limit clinical applications.

Short-term skeletal and dentoalveolar effects of overexpansion

OBJECTIVES

To evaluate whether the amount of rapid maxillary expansion differentially affects the skeletal and dentoalveolar changes that occur.

MATERIALS AND METHODS

This randomized controlled trial included 23 patients who had rapid maxillary expansion (RME). Subjects were randomly assigned to a conventional expansion control group (n = 12) or an overexpansion group (n = 11), who started treatment at 13.2 ± 1.5 and 13.8 ± 1 years of age, respectively. Cone beam computed tomography scans (11 cm) were obtained prior to rapid maxillary expander (RME) delivery and approximately 3.7 months later. Initial hand-wrist radiographs were used to determine the participants' skeletal maturity.

RESULTS

The RME screws were activated 5.6 ± 1.2 mm and 10.1 ± 0.6 mm in the conventional and overexpansion groups, respectively. Overexpansion produced significantly greater expansion of the nasal cavity (2.1X-2.5X), maxillary base (2.3X), buccal alveolar crest (1.4X), and greater palatine foramina (1.9X). Significantly greater intermolar width increases (1.8X) and molar inclination (2.8X) changes were also produced. The nasal cavity and maxillary base expanded 23%-32% as much as the screws were activated. Skeletal expansion was positively correlated with RME screw activation (R = 0.61 to 0.70) and negatively correlated (R = -0.56 to -0.64) with the patients' skeletal maturation indicators (SMIs). Together, screw activation and the patients' SMI scores explained 48%-66% of the variation in skeletal expansion.

CONCLUSIONS

This pilot study shows that overexpansion produces greater changes than conventional expansion, with greater skeletal effects among less mature patients.

Age-dependent effects of transverse maxillary deficiency treated by microimplant-assisted rapid palatal expansion: A prospective cone-beam computed tomography study

INTRODUCTION

This study investigated the results of maxillary discrepancy treated by microimplant-assisted rapid palatal expansion (MARPE) at different ages.

METHODS

Sixty patients (aged 11.0-34.1 years; 23 male and 37 female) were treated by MARPE. Cone-beam computed tomography scans and dental casts were taken before and after expansion. The data were compared among 4 age groups: early adolescents (aged 11-14 years), late adolescents (aged 15-19 years), young adults (aged 20-24 years), and old adults (aged 25-34.1 years).

RESULTS

The success rates of midpalatal suture separation were 100%, 100%, 88.2%, and 85.7% for early adolescents, late adolescents, young adults, and old adults, respectively. Palatal sutures at the level of the first molar were expanded by 4.02 mm, 3.48 mm, 2.63 mm, and 2.10 mm, corresponding to 66.7%, 58.1%, 42.0%, and 37.9% of the total dental expansion. Significant differences were found in the amounts of palatal suture expansion and the ratio of skeletal dental expansion between patients aged <20 years and patients aged ≥20 years (P <0.05). Skeletal expansion constituted 69.4%, 51.3%, 39.0%, and 29.8% of the total screw expansion. Except for the comparison between young adults and old adults, there were significant differences between groups for the ratio of skeletal screw expansion (P <0.05).

CONCLUSIONS

The midpalatal suture can be expanded by MARPE more easily in patients <20 years of age than in patients ≥20 years of age. The ratio of skeletal screw expansion decreases as age increases.

A CBCT Evaluation of Midpalatal Bone Density in Various Skeletal Patterns

The purpose of this study was to evaluate midpalatal bone density (BD) by using cone-beam computed tomography (CBCT) according to gender, age, and vertical and horizontal skeletal patterns. CBCT images from 126 subjects (64 females and 62 males) were reoriented and analyzed in order to attain BD values at the midpalatal suture. Four age groups were used for classification (adolescence, 10 ≤ early < 14 years, 14 ≤ middle ≤ 17 years, and 17 < late ≤ 21 years; adult > 21 years). Vertical skeletal pattern categories were differentiated by the Frankfort horizontal line to mandibular plane angle (hypodivergent < 22°, 22° ≤ normovergent ≤ 28°, and 28° < hyperdivergent). Horizontal skeletal pattern differentiation was defined by ANB angle (Class III < 0°, 0° ≤ Class I ≤ 4°, and 4° < Class II). Females showed significantly higher BD than males (p < 0.001). As age increased, BD increased significantly (p < 0.001). There were no significant differences between vertical skeletal patterns. Class II showed significantly less BD than Class III (p < 0.05). With this information, clinicians can better understand BD trends of the midpalatal suture and, thus, better understand our patient’s anatomy and potential hurdles in successful treatment.

Midpalatal suture density ratio after rapid maxillary expansion evaluated by cone-beam computed tomography

INTRODUCTION

Identifying the stage of midpalatal suture (MPS) fusion is essential for rapid maxillary expansion (RME). The objective of this study was to evaluate the relationship between MPS density ratio and the skeletal response after RME using cone-beam computed tomography (CBCT).

METHODS

CBCT scans of 64 patients (age, 13.81 ± 1.68 years; 42 females and 22 males) who underwent RME as part of comprehensive orthodontic treatment were used for this study. Two CBCT records were made at T1 (pre-RME) and T2 (post-RME). MPS density was assessed by gray scale and the skeletal effects through linear measurements: greater palatine foramina, the width of the nasal cavity (NW), infraorbital foramina. The data were collected at 4 different times: baseline, 24 hours, 48 hours, and 4 weeks.

RESULTS

There was no statistically significant correlation between MPS density ratio and greater palatine foramina or infraorbital foramina. Negative correlations with MPS density ratio are presented with the difference of age post-RME and pre-RME (r = -0.46, P = 0.033) in males, and NW (r = -0.41, P = 0.007) in females. A significant association between gender and the MPS density ratio was found (P = 0.015) in females.

CONCLUSIONS

There is a weak negative correlation between the MPS density ratio and the difference of age post-RME and pre-RME in males and the NW in females. Females presented greater density ratios than males. MPS density ratio through CBCT does not appear to be an adequate parameter to predict the skeletal effect in adolescent patients and young adults.

Evaluation of transverse maxillary growth on cone-beam computed tomography images

This study aimed at quantifying the annual transverse growth of the maxilla using skeletal landmarks in three different regions on cone-beam computed tomography (CBCT) scans. CBCT scans taken before and after orthodontic treatment of 100 child and adolescent patients (50 male, 50 female) without maxillary transverse deficiencies were used to determine the transverse linear distances between the greater palatine foramina (GPFd), the lateral walls of the nasal cavity (NCd), and the infraorbital foramina (IOFd). We found that all distances increased significantly with growth in both genders (p < 0.001). The overall average annual change was 0.5 mm for GPFd, 0.3 mm for NCd, and 0.7 mm for IOFd. Males generally had greater annual changes than females for GPFd and IOFd, but not NCd. There were weak, statistically not significant (p > 0.05) correlations between patient age and the annual changes in GPFd, NCd, and IOFd. These results suggest that the positions of the greater palatine foramina, the lateral walls of the nasal cavity, and the infraorbital foramina change consistently with maxillary transverse growth. Clinicians can use the growth rates as population averages to more confidently estimate the amount of skeletal transverse deficiency or evaluate the long-term effects of maxillary expansion treatment.

Maturation stages of the sutures in the median palatine evaluated with cone-beam computed tomography

INTRODUCTION

This study aimed to evaluate the influence of age, sex, and facial growth patterns on the maturation stage of midpalatal sutures.

METHODS

We selected 90 total skull cone-beam computed tomography scans and divided them into the following 3 groups: brachyfacial (n = 30), mesofacial (n = 30), and dolichofacial (n = 30). These groups were determined using Ricketts VERT 3-dimensional cephalometric analysis. All patients were aged ≥18 years and were divided into those aged ≥30 years and >30 years. The maturational stage of the median palatine sutures was determined by evaluating the central transverse axial dimension in the maxillary-mandibular palate. Maturational stages were classified as A, B, C, D, and E.

RESULTS

Of the 90 images reviewed, 55 (61.1%) were female patients, and 35 were male patients (38.9%). The age of patients ranged from 18 to 59 years, with 55 patients aged <30 years (61.1%) and 35 aged ≥30 years (38.9%). Regarding the maturational stages, 3.3% of brachyfacial, 6.7% of mesiofacial, and 16.7% of dolichofacial subjects (P = 0.032) were classified as stages B and C.

CONCLUSIONS

The patients' facial patterns were found to be a significant signal for the maturation stage of midpalatal sutures. Adult dolichofacial patients are the most likely to have stage B and C.

Intraperitoneal injection of PDTC on the NF-kB signaling pathway and osteogenesis indexes of young adult rats with anterior palatal suture expansion model

In recent years, many studies have found that mechanical tension can activiate NF-kB signal pathway and NF-kB plays an important role in the process of osteogenesis. However, it is still unclear whether this process exists in the anterior palatal suture expansion. In this paper, we mainly studied the effect of intraperitoneal injection of PDTC on the NF-kB signaling pathway and osteogenesis index of the anterior palatal suture expansion model in young adult rats. The expansion model is grouped and established: 45 male 8-week-old Sprague-Dawley rats were randomly divided into three groups, an expansion only (EO) group, an expansion plus PDTC (PE) group, and a control group. The results revealed that PDTC inhibited the activity of NF-kB signaling pathway and promote one morphogenetic protein 2 (BMP-2), steocalatin (OCN) expression. Compared with the control group, the optical density (OD) value of BMP in the EO group and PE group rats increased significantly from the first day to the seventh day, and the difference was statistically significant (P<0.05). After 6.0Gy irradiation, PDTC administration group could slightly increase the total SOD level in the liver and serum of rats, and reduce the MDA level in the liver and serum, especially the effect of 60mg/kg and 90mg/kg was the most obvious.

Tomographic analysis of midpalatal suture prior to rapid maxillary expansion

INTRODUCTION

In Orthodontics and Facial Orthopedics, the timing of treatment onset may be critical and individual analysis should be applied to promote a favorable treatment planning. In this study, individual analysis of midpalatal suture (MS) and palatal measurements were performed in teenagers and young adult patients treated with rapid maxillary expansion (RME).

DESCRIPTION

Twenty-six patients submitted to RME with a tooth-supported appliance (Hyrax) were evaluated. The inclusion criteria were: minimum age of 14 years, presenting all posterior teeth, diagnosed with transverse maxillary discrepancy, and with a clinical indication for maxillary expansion. The pretreatment CBCT scans of these patients were assessed to obtain the stages of MS maturation (MSM); density ratio (MSD); and palatal length, thickness (anterior, intermediate and posterior) and sagittal area.

RESULTS

The maturation stages present were C, D or E; the density ranged from 0.6 to 1, and lower density (MSD < 0.75) and higher density (MSD ≥ 0.75) groups were determined. Individuals with higher MSD presented smaller sagittal area, compared to the lower density group. Individuals in D and E MSM stages presented smaller sagittal area and intermediate thickness, compared to stage C.

CONCLUSIONS

Smaller palatal sagittal area was observed in the high MSD groups and in the stages D and E of MSM.

Would midpalatal suture characteristics help to predict the success rate of miniscrew-assisted rapid palatal expansion?

INTRODUCTION

The objective of this study was to evaluate whether the success or failure of miniscrew-assisted rapid palatal expansion (MARPE) in patients with advanced bone maturation could be related to factors such as midpalatal suture density (MPSD), midpalatal maturation stage (MPSM), midpalatal bone thickness (MBTh), palatal length (PL), expander screw position (ESP), and patient's age.

METHODS

Cone-beam computed tomography scans of 25 patients of both sexes, aged 15-37 years (23 ± 7.2), presenting transverse maxillary deficiency and complete skeletal maturation (cervical vertebral maturation stage 5) treated using MARPE were evaluated. The success of MARPE was confirmed by the midpalatal suture opening and failure when no opening or limited separation of midpalatal suture occurred. Data were analyzed using t test for independent samples for differences in the variables of success and failure cases and the Pearson correlation test to evaluate the relation of the success and age, ESP, MPSD, MPSM, PL, and MBTh.

RESULTS

Age, MPSM, and MBTh at 12 mm and 16 mm presented statistically significant results (P <0.05). The older the patient with advanced bone maturation, the lower the success rates of MARPE (94.1%, 90%, and 76% for 25, 30, and 37 years, respectively). The ESP had similar averages in cases of success (15.34 mm) and failure (13.51 mm). There was no correlation between ESP, MPSD, MPSM, or PL and MARPE success.

CONCLUSIONS

MARPE success was related to age and a greater MBTh at 12 mm and 16 mm.

Evaluation of the Relationship Between Midpalatal Suture Maturation Indicators as Predictors for Surgically-Assisted and Conventional Rapid Maxillary Expansion

ABSTRACT

Rapid maxillary expansion (RME) is an effective orthopedic procedure to correct maxillary transversal deficiency in young patients. In cases of sutural closure, surgically assisted RME is used to reduce the resistance to sutural disjunction. Foundation of a diagnostic relationship between maturation indices and the expected skeletal response to expansion can enable clinicians to identify the need for surgically assisted RME prospectively. The primary aim of this study was to assess the correlation between the amount of achieved skeletal expansion with midpalatal suture density on computed tomography images, and the secondary aim was to assess the correlation between the amount of achieved skeletal expansion with the recently suggested midpalatal suture maturation indicators: cervical vertebral maturation (CVS), midpalatal suture maturation stage (MPSM) and midpalatal suture density ratio. Forty Digital Imaging and Communications in Medicine data from the archived computed tomography scans of 20 patients (mean age: 15.55 years) before RME (T1) and after 3-month retention period (T2) were analyzed. The tested maturity indicators did not show statistically significant correlation between the skeletal effect proportions. However, clinically and radiologically effective RME was seen in MPSMs A, B, and C and also cervical vertebra stages CVS5 and CVS6. More research is needed to determine a diagnostic predictor for the skeletal effects of maxillary expansion treatment modalities.

Association of the mid-palatal suture morphology to the age and to its density: A CBCT retrospective comparative observational study

OBJECTIVE

The twofold aim of the present investigation was to: 1. evaluate the degree of mid-palatal suture (MPS) maturation via CBCT in relation to patient age, and 2. to determine whether there was a correlation between quantitative (i.e., suture density) and qualitative (i.e., suture morphology) analysis.

MATERIALS AND METHODS

The stage of mid-palatal suture maturation and suture density ratio were assessed for 160 subjects on CBCTs using five qualitative stages proposed by Angelieri with the addition of three additional stages (i.e., B/C, C/D and D/E) and quantitative grey density scores of Grünheid MPS1,2,3,4 with the addition of parasutural bone and soft palate. The repeatability of both methods was evaluated using Cohen's K.The relationship between midpalatal suture maturation and age was assessed using ANOVA and Classification and Regression Trees (CART) analysis and tabulation and a χ² test for quantitative and qualitative analysis respectively. Statistical significance was assessed using a 5% threshold.

RESULTS

The final sample included 160 CBCTs (80 male,80 female; mean age 23.2±13.5). Both methods were found to be correlated and highly repeatable. In addiction they showed an age-related correlation in MPS morphology.

CONCLUSION

The mid-palatal suture density ratio and the stage of mid-palatal suture maturation has the potential to become useful in clinical practice. In fact, despite the correlation between MPS maturation stage and age, the latter parameter cannot be used as a clinical discriminator due to the great variability between subjects. It is therefore advisable to assess each patient individually on CBCT scans in order to determine treatment choices.

Evaluation of the suture ossification level according to age and sex in children, adolescents, and adults. A cross-sectional and observational 3D study

OBJECTIVE

To determine the ossification level of the midpalatal suture (MPS) in children, adolescents and adults from a Peruvian sample; according to the method proposed by Angelieri et al. with cone-beam computed tomographies (CBCTs).

MATERIAL AND METHODS

The sample consisted of 315 CBCTs of 168 females and 147 males. The total sample was divided into 3 groups according to age and sex: children (n=77), adolescents (n=113) and adults (n=125). The images were mainly assessed in the axial plane using the Real Scan 2.0 software. The different periods of ossification of the MPS at the level of the vertical half of the palate was defined according to the five stages of Angieleri method (from A to E). The Student t-Test, Chi-square test, Kruskal-Wallis test and Spearman's Rho test were applied.

RESULTS

Chi² test results showed that the stages of MPS ossification depended on the age of the patient by age ranges (P<0.005). Multiple comparison tests affirmed that male and female subjects in the children group had fewer ossification stages than the adolescent and adult groups (P<0.001). Meanwhile, there were no statistically significant differences between the two older age groups. Finally, there was a moderate positive correlation between the stages of ossification of the MPS and the age in the male group (Rho=0.511).

CONCLUSIONS

The onset of MPS ossification was significantly related to subjects up to 12 years of age and more frequently in stages B and C in both sexes. There was no difference in MPS ossification in adolescents and adult subjects.

Influence of different types of rapid maxillary expansion on root resorption: a systematic review

OBJECTIVES

This study aimed to assess the influence of different types of rapid maxillary expansion on root resorption (RR).

METHODS

Literature searches were carried out electronically in five English and two Chinese databases. Randomized controlled trials (RCTs), controlled clinical trials (CCTs), cohort studies, and case-control studies were included. The data were extracted by three authors. The risk of bias in the RCTs and nonrandomized studies were assessed in accordance with corresponding scales.

RESULTS

Among the 400 articles identified, seven were included for the final analysis. Three studies were graded as high value of evidence, while two and another two studies were graded as moderate value and low value, respectively. According to the available evidence, the tooth-borne maxillary expansion caused more obvious RR of anchorage teeth than the bone-borne one. In addition, the Haas-type palatal acrylic pads could not effectively reduce the degree of RR. The difference in the design of the retainer between the tooth-borne maxillary expansion (the use of a band or wire framework to connect the anchorage tooth) did not cause the difference in the incidence and degree of RR.

CONCLUSIONS

Clinical evidence suggested that bone-borne maxillary expansion may decrease the amount of RR, while the amounts of resorption did not significantly differ between Haas and Hyrax and between different retainer types of Hyrax.

Midpalatal suture density ratio: Assessing the predictive power of a novel predictor of skeletal response to maxillary expansion

INTRODUCTION

Rapid maxillary expansion (RME) is a common orthodontic treatment to correct maxillary transverse deficiency; however, the inability to determine the precise timing of fusion of the midpalatal suture creates difficulty for clinicians to prescribe the appropriate treatment, surgical or nonsurgical expansion. The purpose of this study was to assess the predictive power of the midpalatal suture density ratio (MPSD) for a skeletal response to RME.

METHODS

Pre- and posttreatment cone-beam computed tomography scans were obtained from 78 orthodontic patients aged from 8 to 18 years treated with RME. MPSDs were calculated from pretreatment scans, and a prediction was made for the amount of skeletal expansion obtained at the level of the palate after comprehensive orthodontic treatment. Predicted values were compared with actual outcomes as assessed from posttreatment scans, followed by regression analyses to investigate correlations between MPSD and skeletal expansion and equivalence testing to analyze the performance of the predicted measurements.

RESULTS

The MPSDs were not statistically significantly (P >0.05) correlated with the amount of skeletal expansion achieved. In addition, the predicted skeletal expansion using MPSD was not statistically equivalent to the skeletal expansion achieved using an equivalence margin of ±0.05.

CONCLUSIONS

The results suggest that the MPSD obtained from pretreatment cone-beam computed tomography scans were not correlated well enough with the amount of skeletal expansion achieved to be an effective predictor of the amount of long-term skeletal expansion after RME.

Prediction of rapid palatal expansion success via fractal analysis in hand-wrist radiographs

INTRODUCTION

This study aimed to evaluate the efficacy of fractal analysis of hand-wrist radiography in the decision of conventional or surgery-assisted rapid palatal expansion (RPE).

METHODS

The study included 48 patients who underwent the RPE procedure. Study groups were as follows: group 1 (successful conventional RPE [n = 24, 5 male and 19 female patients; mean age ± standard deviation, 15.85 ± 0.97 years]) and group 2 (failed conventional RPE [n = 24, 5 male and 19 female patients; mean age ± standard deviation, 15.96 ± 1.08 years]). Fractal dimension (FD) analysis was conducted on hand-wrist radiographs of the patients for 4 different regions: the epiphysis-diaphysis line of the radius bone and the proximal, medial (MP3), and distal (DP3) phalanxes of the middle finger. A Student t test was performed to compare fractal values between the groups. A receiver operating characteristic analysis was applied to determine the optimal cutoff value of FDs. In addition, a Pearson correlation coefficient was calculated to evaluate the relationship between the fractal values and either age or hand-wrist stage in a second sample group (n = 90; age range, 8.7-18.7 years).

RESULTS

Fractal values of the radius, MP3, and DP3 were significantly increased in the failed conventional RPE group (P <0.05). The optimal cutoff value of the FD for predicting the success of conventional RPE was 1.16 in the radius, 1.18 in proximal phalanxes, 1.29 in MP3, and 1.08 in DP3. There was a positive correlation between fractal values of the radius and age or hand-wrist stages (P <0.05).

CONCLUSIONS

Within the limits of this study, results revealed that fractal analysis of hand-wrist radiographs might be considered a significant tool in the prediction of RPE success.

Evaluation of the degree of fusion of midpalatal suture at various stages of cervical vertebrae maturation

Introduction:

Rapid palatal expansion was initially done during circumpubertal age. However, the correct evidence suggests visualizing the patency of midpalatal suture (MPS) radiologically at different chronological age as there can be early or late fusion of suture in some cases.

Objective:

This study was aimed at assessing the fusion of MPS at different stages of cervical vertebrae maturation and to find any correlation between them from the patients of two South Indian districts.

Design and Setting:

A total of 144 subjects aged 10–20 years were included in our study.

Materials and Methods:

Skeletal age based on cervical vertebrae was assessed from lateral cephalograms. MPS staging was done by two observers using cone-beam computed tomography at 2-time intervals. Inter- and intra- examiner reliability for suture staging was analyzed by kappa statistics. Correlation of skeletal age to sutural maturation was done using Kendall’s tau-b test.

Results:

A fair agreement was obtained by kappa test for inter (0.313) and intraexaminer reliability (0.219 for first and 0.451 for the second observer) for 144 subjects. Kendall’s tau-b test showed a significant correlation between skeletal age and suture maturation, with the maximum association between CS 4 skeletal age and Stage C of MPS, with P < 0.001.

Conclusion:

A strong correlation was found between skeletal age and sutural fusion. Predominantly, Stage C coincided with CS 4 with greater gender predilection toward females.

Predictors of midpalatal suture expansion by miniscrew-assisted rapid palatal expansion in young adults: A preliminary study

OBJECTIVE

We sought to determine the predictors of midpalatal suture expansion by miniscrew-assisted rapid palatal expansion (MARPE) in young adults.

METHODS

The following variables were selected as possible predictors: chronological age, palate length and depth, midpalatal suture maturation (MPSM) stage, midpalatal suture density (MPSD) ratio, the sella-nasion (SN)-mandibular plane (MP) angle as an indicator of the vertical skeletal pattern, and the point A-nasion-point B (ANB) angle for anteroposterior skeletal classification. For 31 patients (mean age, 22.52 years) who underwent MARPE treatment, palate length and depth, MPSM stage and MPSD ratio from the initial cone-beam computed tomography images, and the SN-MP angle and ANB angle from lateral cephalograms were assessed. The midpalatal suture opening ratio was calculated from the midpalatal suture opening width measured in periapical radiographs and the MARPE screw expansion. Statistical analyses of correlations were performed for the entire patient group of 31 subjects and subgroups categorized by sex, vertical skeletal pattern, and anteroposterior skeletal classification.

RESULTS

In the entire patient group, the midpalatal suture opening ratio showed statistically significant negative correlations with age, palate length, and MPSM stage (r = -0.506, -0.494, and -0.746, respectively, all p < 0.01). In subgroup analyses, a strong negative correlation was observed with the palate depth in the skeletal Class II subgroup (r = -0.900, p < 0.05).

CONCLUSIONS

The findings of this study indicated that age, palate length, and MPSM stage can be predictors of midpalatal suture expansion by MARPE in young adults.

Midpalatal suture maturation stage assessment in adolescents and young adults using cone-beam computed tomography

Background

The aim of this study was to evaluate the midpalatal suture maturation stages in adolescents and young adults using cone-beam computed tomography (CBCT).

Methods

The sample comprised 200 CBCT scans of individuals aged 10 to 25 years old (95 males and 105 females) divided into three groups, adolescents (n = 48), post-adolescents (n = 52), and young adults (n = 100). The Planmeca ProMax 3D software was used for the midpalatal suture maturation stage evaluation according to Angieleri’s method, using cross-sectional axial slice. Two previously calibrated examiners analyzed the images and classified according to five different maturation stages. A, B, and C stages were considered with open midpalatal suture, and D and E were considered without open midpalatal suture. Association tests were performed using chi-square test also, and a binary logistic regression was evaluated (P < 0.05).

Results

The possibility to find open midpalatal suture in individuals of 10 to 15 years old was 70.8%, in subject aged 16 to 20 and 21 to 25 years old was 21.2% and 17%, respectively. Furthermore, this possibility in individuals older than 16 years was greater in males than in females.

Conclusions

The possibility to find open midpalatal suture in post-adolescents and young adults is greater than the orthodontists considered years ago. Furthermore, men are more likely to find midpalatal suture opening. These implications might be considered by the orthodontists when maxillary expansion is required. Besides, the ossification of the middle palatal suture is very variable, and therefore, the use of CBCT might be recommended to clarify this possibility.

Rapid maxillary expansion outcomes according to midpalatal suture maturation levels

BACKGROUND

This study aims to compare the relationship between skeletal and dental outcomes of rapid maxillary expansion (RME) treatment on cone beam computed tomography (CBCT) images between pre-pubertal peak (pre-peak) and post-pubertal peak (post-peak) patients. The null hypothesis was that there was no difference in the outcomes of RME treatment between the groups.

METHODS

Thirty-two patients who underwent RME treatment were classified according to midpalatal suture maturation levels and then divided into two groups as pre-peak and post-peak. Skeletal and dental measurements were performed on the CBCT images at T0 (pre-treatment stage) and at T1 (post-treatment stage). Paired sample t test was used to evaluate normally distributed data and P < 0.05 was taken as the significance level.

RESULTS

There were significant differences between T0 and T1 within the groups, but the changes between the pre-peak and post-peak patient groups were not statistically significant.

CONCLUSION

Non-significant changes were found between the two groups, and the null hypothesis was excepted.

Corticopuncture Facilitated Microimplant-Assisted Rapid Palatal Expansion

Introduction

Microimplant-assisted rapid palatal expansion (MARPE) has been considered an alternative to avoid extensive surgical procedures. In order to obtain skeletal results of MARPE, force should be enough to overcome areas of resistance and the first one that is required to be disrupted is the midpalatal suture, which becomes increasingly interdigitated after adolescence.

Objective

The present study aimed at providing a novel approach using a minimally invasive method called corticopuncture (CP) in association with MARPE illustrated by a case report of a 35-year-old Brazilian female Caucasian patient presenting maxillary transverse deficiency.

Method

Treatment plan started with an orthopedic correction of the transverse problem using a MARPE device. After many unsuccessful attempts to activate MARPE, corticopunctures were performed along the midpalatal suture. CP procedure at the midpalatal suture included 8 perforations (2 mm apart), performed after previous predrilling followed by miniscrew insertion (5 mm thread length and 1.8 mm diameter).

Results

After CP and new activation protocol, the opening of the midpalatal suture was observed by CBCT images, showing skeletal results, suture split of 3.14 mm (premolar area) and 2.06 (molar area), an increase of 4.3 mm (premolar) and 3.03 mm (molar) in basal bone width, 4.43 mm (premolar) and 3.1 mm (molar) in cortical bone width, and minimal dental effects (mean of 1.2° of tooth tipping).

Conclusion

The combination of MARPE and corticopuncture method was proved to be a nonsurgical treatment option to correct maxillary transverse deficiency in an adult patient. CP was able to weaken suture interdigitation thus facilitating the split.

Reliability and reproducibility of the method of assessment of midpalatal suture maturation: A tomographic study

OBJECTIVES

To assess reliability and reproducibility of the individual assessment of midpalatal suture maturation in computed tomography among orthodontists and radiologists for potential diagnosis application.

MATERIALS AND METHODS

Sixty axial slices from cone-beam computed tomography and multi-slice CT scans of patients aged between 11 and 21 years old (33 females and 27 males) were selected. For the investigation of reliability and reproducibility of the method, two groups of examiners were established. The first group consisted of 11 orthodontists and the second consisted of 10 radiologists. Each group examined the images and performed individual assessment of the midpalatal suture maturation method twice within an interval of 21 days. During the first and second analyses, the sequence of images was randomized to reduce potential bias. Weighted Cohen's kappa was performed to assess inter- and intra-examiners' agreement. The percentage of perfect agreement and the number of stages apart for each disagreement were calculated. The significance level was P < .05.

RESULTS

The overall inter-examiner agreement was satisfactory in the first (kappa_w: 0.37) and the second (kappa_w: 0.34) analyses. Intra-examiner agreement outcomes were similar between orthodontists (kappa_w: 0.44) and radiologists (kappa_w: 0.41). The percentage of perfect agreement was 43.2%.

CONCLUSIONS

The method for individual assessment of midpalatal suture maturation revealed potential reliability and reproducibility. However, the agreement rate observed in the present study was not high enough for a method designed for routine clinical applications.

Midpalatal suture: evaluation of the morphological maturation stages via bone density

Background

To investigate the relationship between the morphological maturation stages of the midpalatal suture and its bone densities.

Methods

The sample consisted of 91 subjects aged 8–18 years who underwent cone beam computed tomography. All images were examined to classify morphological maturation of the midpalatal suture to five groups according to Angelieri et al. Bone density of the midpalatal suture was measured at the maxillary and palatal regions. Kruskal-Wallis and Mann-Whitney U tests were used to analyze the difference between groups.

Results

Bone density of the midpalatal suture was significantly higher in the palatal region in E stage and in the maxillary region in D and E stages.

Conclusions

It is concluded that the change in bone density of the midpalatal suture between the morphological maturation stages supports their reliability in clinical application.

Anatomical and mechanical properties of swine midpalatal suture in the premaxillary, maxillary, and palatine region

The mechanical properties of the midpalatal suture and their relationship with anatomical parameters are relevant for both tissue engineering and clinical treatments, such as in sutural distraction osteogenesis. Soft tissues were dissected from ten swine heads and the hard palate was sliced perpendicularly to the midpalatal suture. Thirteen specimens were collected from each animal and analysed with micro-computed tomography and 4-point-bending for sutural width (Sw), interdigitation (LII), obliteration (LOI), failure stress (σ _f ), elastic modulus (E), and bone mineral density (BMD). Values of the premaxillary, maxillary, and palatine region were compared with Kruskal-Wallis one-way ANOVA and Spearman's rank coefficient was used to analyse the correlation between parameters and their position along the suture (α = 0.05). LII had values of 1.0, 2.9, and 4.3, LOI had values of 0.0%, 2.5%, and 4.5%, and E had values of 12.5 MPa, 31.3 MPa, and 98.5 MPa, in the premaxillary, maxillary, and palatine region, respectively (p < 0.05). Failure stress and rigidity of the midpalatal suture increased from rostral to caudal, due to greater interdigitation and obliteration. These anatomical and mechanical findings contribute to characterise maxillary growth, and may help to understand its mechanical reaction during loading, and in virtual simulations.