Design and characterization of monolaurin loaded electrospun shellac nanofibers with antimicrobial activity

Fabrication and characterization of shellac nanofibers with colon-targeted delivery of quercetin and its anticancer activity

In this study, the feasibility of shellac nanofibers as carrier system for colonic delivery of quercetin was evaluated. Firstly, the nanofibers without and with different amounts (2.5 %, 5.0 %, and 7.5 %) of quercetin were fabricated using pure shellac as a carrier by electrospinning. The morphology of nanofibers was bead-shape confirmed by SEM. FTIR, XRD, and DSC analysis showed that quercetin was encapsulated into shellac nanofibers, forming an amorphous complex. The molecular docking simulation indicated quercetin bound well to shellac through hydrogen bonding and van der Waals forces. These nanofibers had higher thermal stability than pure quercetin, and their surface wettability exhibited a pH-responsive behavior. The loading capacity of quercetin varied from 2.25 % to 6.84 % with the increased amount of quercetin, and it affected the stability of nanofibers in food simulants by measuring the release profiles of quercetin. The shellac nanofibers had high gastrointestinal stability, with a minimum quercetin release of 16.87 % in simulated digestive fluids, while the remaining quercetin was delivered to the colon and was released gradually. Moreover, the nanofibers exerted enhanced anticancer activity against HCT-116 cells by arresting cell cycle in G0/G1 phase and inducing cell apoptosis. Overall, shellac nanofibers are promising materials for colon-targeted delivery of active compounds.

Trends in the Incorporation of Antiseptics into Natural Polymer-Based Nanofibrous Mats

Nanofibrous materials represent a very promising form of advanced carrier systems that can be used industrially, especially in regenerative medicine as highly functional bandages, or advanced wound dressings. By incorporation of antimicrobial additives directly into the structure of the nanofiber carrier, the functionality of the layer is upgraded, depending on the final requirement-bactericidal, bacteriostatic, antiseptic, or a generally antimicrobial effect. Such highly functional nanofibrous layers can be prepared mostly by electrospinning technology from both synthetic and natural polymers. The presence of a natural polymer in the composition is very advantageous. Especially in medical applications where, due to the presence of the material close to the human body, the healing process is more efficient and without the occurrence of an unwanted inflammatory response. However, converting natural polymers into nanofibrous form, with a homogeneously distributed and stable additive, is a great challenge. Thus, a combination of natural and synthetic materials is often used. This review clearly summarizes the issue of the incorporation and effectiveness of different types of antimicrobial substances, such as nanoparticles, antibiotics, common antiseptics, or substances of natural origin, into electrospun nanofibrous layers made of mostly natural polymer materials. A section describing the problematic aspects of antimicrobial polymers is also included.

A Novel Comprehensive Therapeutic Approach to the Challenges of Chronic Wounds: A Brief Review and Clinical Experience Report

Following the clinical perspective and concept that a healthy body will not develop chronic wounds, the central approach for the treatment described here is based on an understanding of how the body transforms the wound microenvironment from a non-healing to a healing state. As part of a comprehensive treatment regimen that includes OCM™ (complete matrix), wound preparation, and skin protectant formulations, the OCM contains components for complete wound healing by attending to the individual needs required to promote the closure of each unique chronic wound. During application of the comprehensive treatment regimen in independent investigator-led trials, the total wound percentage average reduction over the first 4 weeks of treatment was 60% across multiple wound types; median time to total wound closure was 6.9 weeks. Safety testing of the OCM formulation shows no potential allergenicity, no potential sensitization, and no known product-related adverse events. Clinical trials evaluating the OCM formulation as part of the comprehensive treatment regimen of multiple wound types are underway. Results of clinical trials and real-world experiences will expand current knowledge of the wound-healing potential of this novel product.

Fabrication and Optimization of Electrospun Shellac Fibers Loaded with Senna alata Leaf Extract

Single-fluid electrospinning creates nanofibers from molten polymer solutions with active ingredients. This study utilized a combination of a fractional factorial design and a Box-Behnken design to examine crucial factors among a multitude of parameters and to optimize the electrospinning conditions that impact fiber mats' morphology and the entrapment efficiency of Senna alata leaf extract. The findings indicated that the shellac content had the greatest impact on both fiber diameter and bead formation. The optimum electrospinning conditions were identified as a voltage of 24 kV, a solution feed rate of 0.8 mL/h, and a shellac-extract ratio of 38.5:3.8. These conditions produced nanosized fibers with a diameter of 306 nm, a low bead-to-fiber ratio of 0.29, and an extract entrapment efficiency of 96% within the fibers. The biphasic profile of the optimized nanofibers was confirmed with an in vitro release study. This profile consisted of an initial burst release of 88% within the first hour, which was succeeded by a sustained release pattern surpassing 90% for the next 12 h, as predicted with zero-order release kinetics. The optimized nanofibers demonstrated antimicrobial efficacy against diverse pathogens, suggesting promising applications in wound dressings and protective textiles.

Synergistic amalgamation of shellac with self-antibacterial hydroxyapatite and carboxymethyl cellulose: An interactive wound dressing for ensuring safety and efficacy in preliminary in vivo studies

This study focuses on the synergistic formulation of environmentally friendly blended materials based on carboxymethyl cellulose (CMC) for advanced interactive wound dressing. New CMC hydrogels were prepared with two degrees of functionalization and chemically crosslinked with citric acid (CA) to fine-tune their properties. Additionally, CMC-based hybrids were created by blending with shellac (SHL) and incorporating self-antibacterial hydroxyapatite (HA) to inhibit bacterial growth and promote wound healing. The results demonstrate the successful production of superabsorbent hydrogels with typical swelling degrees ranging from 81% in water to 82% in phosphate-buffered saline (PBS). These hydrogels exhibit distinct morphological features and remarkable improvements in surface mechanical properties, specifically in their tensile properties, which show a significant increase from approximately 0.03 to 2.2 N/mm2 due to the formation of CMC-SHL-HA hybrid nanostructures. Furthermore, the cytocompatibility of these CMC-based hydrogels was investigated by assessing the in vitro cell viability responses of human skin fibroblasts. The results reveal the cell viability responses over 91%, indicating their biocompatibility with human cells. Moreover, the characteristics of surgical wounds were assessed before and after the application of the hydrogel on dogs, and no signs of infection were observed at any of the surgical sites post-surgery.

State-of-the-Art Review of Advanced Electrospun Nanofiber Composites for Enhanced Wound Healing

Wound healing is a complex biological process with four main phases: hemostasis, inflammation, proliferation, and remodeling. Current treatments such as cotton and gauze may delay the wound healing process which gives a demand for more innovative treatments. Nanofibers are nanoparticles that resemble the extracellular matrix of the skin and have a large specific surface area, high porosity, good mechanical properties, controllable morphology, and size. Nanofibers are generated by electrospinning method that utilizes high electric force. Electrospinning device composed of high voltage power source, syringe that contains polymer solution, needle, and collector to collect nanofibers. Many polymers can be used in nanofiber that can be from natural or from synthetic origin. As such, electrospun nanofibers are potential scaffolds for wound healing applications. This review discusses the advanced electrospun nanofiber morphologies used in wound healing that is prepared by modified electrospinning techniques.

Phase Change Material-Embedded Multifunctional Janus Nanofiber Dressing with Directional Moisture Transport, Controlled Release of Anti-Inflammatory Drugs, and Synergistic Antibacterial Properties

Wound healing is a systematic and complex process that involves various intrinsic and extrinsic factors affecting different stages of wound repair. Therefore, multifunctional wound dressings that can modulate these factors to promote wound healing are in high demand. In this work, a multifunctional Janus electrospinning nanofiber dressing with antibacterial and anti-inflammatory properties, controlled release of drugs, and unidirectional water transport was prepared by depositing coaxial nanofibers on a hydrophilic poly(ε-caprolactone)@polydopamine-ε-polyl-lysine (PCL@PDA-ε-PL) nanofiber membrane. The coaxial nanofiber was loaded with the phase change material lauric acid (LA) in the shell layer and anti-inflammatory ibuprofen (IBU) in the core layer. Among them, LA with a melting point of 43 °C served as a phase change material to control the release of IBU. The phase transition of LA was induced by near-infrared (NIR) irradiation that triggered the photothermal properties of PDA. Moreover, the Janus nanofiber dressing exhibited synergistic antimicrobial properties for Escherichia coli and Staphylococcus aureus due to the photothermal properties of PDA and antibacterial ε-PL. The prepared Janus nanofiber dressing also exhibited anti-inflammatory activity and biocompatibility. In addition, the Janus nanofiber dressing had asymmetric wettability that enabled directional water transport, thereby draining excessive wound exudate. The water vapor transmission test indicated that the Janus nanofiber dressing had good air permeability. Finally, skin wound healing evaluation in rats confirmed its efficacy in promoting wound healing. Therefore, this strategy of designing and manufacturing a multifunctional Janus nanofiber dressing had great potential in wound healing applications.

Engineering tanshinone-loaded, levan-biofunctionalized polycaprolactone nanofibers for treatment of skin cancer

Skin cancer is a challenging condition of the highest prevalence rate among other types of cancer. Thus, advancement of local therapeutic approaches for skin cancer is highly needed. Recently, the use of phytotherapeutics, like tanshinone IIA (Tan), as anticancer agents has become promising. In this work, we engineered Tan-loaded polycaprolactone nanofibers, biofunctionalized with levan and egg-lecithin (Tan@Lev/EL/PCL-NF) for local skin cancer therapy. Novel Tan@Lev/EL/PCL-NF were prepared using w/o-emulsion electrospinning, employing a 23-factorial design. Composite NF exhibited nanofiber diameter (365.56 ± 46.25 nm), favorable surface-hydrophilicity and tensile strength. Tan@Lev/EL/PCL-NF could achieve favorably controlled-release (100% in 5 days) and Tan skin-deposition (50%). In vitro anticancer studies verified prominent cytotoxicity of Tan@Lev/EL/PCL-NF on squamous-cell-carcinoma cell-line (SCC), with optimum cytocompatibility on fibroblasts. Tan@Lev/EL/PCL-NF exerted high apoptotic activity with evident nuclear fragmentation, G2/M-mitosis cell-cycle-arrest and antimigratory efficacy. In vivo antitumor activity was established in mice, confirming pronounced inhibition of tumor-growth (224.25 ± 46.89%) and relative tumor weight (1.25 ± 0.18%) for Tan@Lev/EL/PCL-NF compared to other groups. Tan@Lev/EL/PCL-NF afforded tumor-biomarker inhibition, upregulation of caspase-3 and knockdown of BAX and MKi67. Efficient anticancer potential was further confirmed by histomorphometric analysis. Our findings highlight the promising anticancer functionality of composite Tan@Lev/EL/PCL-NF, as efficient local skin cancer phytotherapy.

Advances in Natural Product Extraction Techniques, Electrospun Fiber Fabrication, and the Integration of Experimental Design: A Comprehensive Review

The present review explores the growing interest in the techniques employed for extracting natural products. It emphasizes the limitations of conventional extraction methods and introduces superior non-conventional alternatives, particularly ultrasound-assisted extraction. Characterization and quantification of bioactive constituents through chromatography coupled with spectroscopy are recommended, while the importance of method development and validation for biomarker quantification is underscored. At present, electrospun fibers provide a versatile platform for incorporating bioactive extracts and have extensive potential in diverse fields due to their unique structural and functional characteristics. Thus, the review also highlights the fabrication of electrospun fibers containing bioactive extracts. The preparation of biologically active extracts under optimal conditions, including the selection of safe solvents and cost-effective equipment, holds promising potential in the pharmaceutical, food, and cosmetic industries. Integration of experimental design into extraction procedures and formulation development is essential for the efficient production of health products. The review explores potential applications of encapsulating natural product extracts in electrospun fibers, such as wound healing, antibacterial activity, and antioxidant properties, while acknowledging the need for further exploration and optimization in this field. The findings discussed in this review are anticipated to serve as a valuable resource for the processing industry, enabling the utilization of affordable and environmentally friendly, natural, and raw materials.

Fabrication, Optimization, and Characterization of Antibacterial Electrospun Shellac Fibers Loaded with Kaempferia parviflora Extract

This study aimed to develop a Kaempferia parviflora (KP) extract based on electrospun shellac fibers capable of transporting methoxyflavones. This study used a Box-Behnken design to determine the optimal production parameters that influence the fiber diameter and bead-to-fiber ratio responses. The optimization step produced fibers with a small diameter (574 nm) and a lower bead-to-fiber ratio (0.48 beads per fiber) by combining 37.25% w/w shellac and 1.50% w/w KP extract with a solution feed rate of 0.8 mL/h and an electrical voltage of 18 kV. The KP extract was found to be dispersed throughout the electrospun shellac fibers during the characterization study. The results were highly correlated with the theoretical values, indicating that the regression models used to predict the response variables were adequate. A study of in vitro dissolution confirmed that KP extract-loaded electrospun shellac fibers could produce a sustained-release profile within 10 h. Additionally, KP-infused shellac fibers demonstrated antibacterial activity against Staphylococcus aureus. This KP loading method combined with shellac properties provided a new delivery system and could be used to explore novel biomedical materials.

Enzymatic Glycerolysis of Palm Kernel Olein-Stearin Blend for Monolaurin Synthesis as an Emulsifier and Antibacterial

Monolaurin is a monoacylglycerol, which can act as an emulsifier and antibacterial. Palm kernel oil is a monolaurin raw material that can be fractionated into palm kernel olein (PKOo) and palm kernel stearin (PKS). Therefore, this study prepares monolaurin through enzymatic glycerolysis of the PKOo-PKS blend. The effects of enzyme concentration, molar ratio of oil to glycerol, solvent to oil ratio, and reaction temperature on the products of glycerolysis were investigated. The best conditions were selected for further production, purification, and characterization of the monolaurin. The results showed that the best glycerolysis condition was obtained with an enzyme concentration of 10% w/w, an oil–glycerol molar ratio of 1:4, a solvent–oil ratio of 2:1 v/w, and a glycerolysis temperature of 40 °C with a stirring speed of 600 rpm based on the monoacylglycerol (MAG) concentration. The identification of the sample with FTIR and NMR indicated that the purified glycerolysis product is the monolaurin. The thermal analysis showed a large endothermic peak with a melting point of 35.56 °C. The purified monolaurin has a HLB value of 5.92, and an emulsion capacity and stability of 93.66 ± 1.85% and 89.54 ± 3.36%, respectively. The minimum inhibitory concentration (MIC) of the monolaurin for Escherichia coli FNCC 0091 and Staphylococcus aureus FNCC 0047 were at 500 ppm, and 100 ppm for Bacillus subtilis FNCC 0060.

Improved Synthesis of α-Glycerol Monolaurate Using Lipozyme TL IM

This study aimed to synthesize α-Glycerol Monolaurate from protected glycerol (glycerol 1,2-acetonide) using Lipozym TL IM as a catalyst. In the first step, transesterification of methyl laurate and glycerol 1,2-acetonide with Lipozyme TL IM produced 1,2-acetonide-3-lauryl glycerol. In the second step, deprotection of 1,2-acetonide-3-lauryl glycerol with Amberlyst-15 produced α-Glycerol Monolaurate. Furthermore, the optimum yield (82.1%) of 1,2-acetonide-3-lauryl glycerol (light yellow liquid, purity of 92%) was achieved at a reactant mole ratio of 1, n-hexane (4 mL) with a reaction time of 12 hours, and total Lipozyme TL IM of 5% (w/w of the total weight of reactants) at a temperature of 35°C. Deprotection of 1,2-acetonide-3-lauryl glycerol with Amberlyst-15 was conducted at room temperature for 24 hours. At a melting point of 62.8°C, and purity of 100% α-Glycerol Monolaurate in the form of a white solid was obtained with a yield of 74.6% after the recrystallization of the crude product. This α-glycerol monolaurate synthesis reaction pathway can be referred to as a green α-monoacylglyceride synthesis method.

Monolaurin-Loaded Gel-Like Microemulsion for Oropharyngeal Candidiasis Treatment: Structural Characterisation and In Vitro Antifungal Property

Recently, monolaurin (ML) has received great interest due to its possible use as an alternative antifungal. However, the limited water solubility of ML is still a major obstacle to its formulation and application. Gel-like microemulsions are one of the promising carriers for low-water-solubility substances due to both the advantages of gels and microemulsions and may be applied for ML. In this study, ML was incorporated into gel-like microemulsions and evaluated for its physicochemical and antifungal properties. The results indicated that the properties of gel-like microemulsion changed after the incorporation of ML, suggesting that ML can induce the transition of internal structure. When simulating the oral cavity environment, changes in the microstructure were observed and depended on the times of dilution. The lamellar structure was formed at 1.5-2 times dilution. However, this structure was disrupted after dilution five times or more. The structural change following dilution was associated with the release profiles. After contacting the formulations with the medium, ML was promptly released, with the majority of ML being released within 2 h. Regarding the antifungal assay, the ML-loaded gel-like microemulsions decreased the survival of Candida albicans within 3 h, although ML was immediately released, suggesting that the ML-loaded in oil droplets required time to permeate through the fungal cell wall. Additionally, the gel-like microemulsions possessed acceptable stability after the temperature cycling test. Therefore, gel-like microemulsions can be a possible carrier for ML loading, and ML-loaded gel-like microemulsions may be applied as an alternative antifungal preparation in the future. Graphical abstract.

Zein-Based Films Containing Monolaurin/Eugenol or Essential Oils with Potential for Bioactive Packaging Application

Zein is renewable plant protein with valuable film-forming properties that can be used as a packaging material. It is known that the addition of natural cross-linkers can enhance a film’s tensile properties. In this study, we aimed to prepare antimicrobial zein-based films enriched with monolaurin, eugenol, oregano, and thyme essential oil. Films were prepared using the solvent casting technique from ethanol solution. Their physicochemical properties were investigated using structural, morphological, and thermal techniques. Polar and dispersive components were analyzed using two models to evaluate the effects on the surface free energy values. The antimicrobial activity was proven using a disk diffusion method and the suppression of bacterial growth was confirmed via a growth kinetics study with the Gompertz function. The films’ morphological characteristics led to systems with uniform distribution of essential oils or eugenol droplets combined with a flat-plated structure of monolaurin. A unique combination of polyphenolic eugenol and amphiphilic monoglyceride provided highly stretchable films with enhanced barrier properties and efficiency against Gram-positive and Gram-negative bacteria, yeasts, and molds. The prepared zein-based films with tunable surface properties represent an alternative to non-renewable resources with a potential application as active packaging materials.

Multiscale Shellac-Based Delivery Systems: From Macro- to Nanoscale

Delivery systems play a crucial role in enhancing the activity of active substances; however, they require complex processing techniques and raw material design to achieve the desired properties. In this regard, raw materials that can be easily processed for different delivery systems are garnering attention. Among these raw materials, shellac, which is the only pharmaceutically used resin of animal origin, has been widely used in the development of various delivery systems owing to its pH responsiveness, biocompatibility, and degradability. Notably, shellac performs better on encapsulating hydrophobic active substances than other natural polymers, such as polysaccharides and proteins. In addition, specially designed shellac-based delivery systems can also be used for the codelivery of hydrophilic and hydrophobic active substances. Shellac is most widely used for oral administration, as shellac-based delivery systems can form a compact structure through hydrophobic interaction, protecting transported active substances from the harsh environment of the stomach to achieve targeted delivery in the small intestine or colon. In this review, the advantages of shellac in delivery systems are discussed in detail. Multiscale shellac-based delivery systems from the macroscale to nanoscale are comprehensively introduced, including matrix tablets, films, enteric coatings, hydrogels, microcapsules, microparticles (beads/spheres), nanoparticles, and nanofibers. Furthermore, the hotspots, deficiencies, and future perspectives of shellac-based delivery system development are also analyzed. We hoped this review will increase the understanding of shellac-based delivery systems and inspire their further development.

Antibacterial Filtration Membranes Based on PVDF-co-HFP Nanofibers with the Addition of Medium-Chain 1-Monoacylglycerols

The efficiency of filtration membranes is substantially lowered by bacterial attachments and potential fouling processes, which reduce their durability and lifecycle. The antibacterial and antifouling properties exhibited by the added materials play a substantial role in their application. We tested a material poly(vinylidene fluoride)-co-hexafluoropropylene (PDVF-co-HFP) based on an electrospun copolymer, where an agent was incorporated with a small amount of ester of glycerol consecutively with caprylic, capric, and lauric acids. Each of these three materials differing in the esters (1-monoacylglycerol, 1-MAG) used was prepared with three weighted concentrations of 1-MAG (1, 2, and 3 wt %). The presence of 1-MAG with an amphiphilic structure resulted in the hydrophilic character of the prepared materials that contributed to the filtration performance. The tested materials (membranes) were characterized with rheological, optical (scanning electron microscopy, SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and other methods to evaluate antibacterial and antifouling activities. The pure water flux was 6 times higher than that of the neat PVDF-co-HFP membrane when the added 1-MAG attained only 1 wt %. It was experimentally shown that the PVDF-co-HFP/1-MAG membrane with high wettability improved antibacterial activity and antifouling ability. This membrane is highly promising for water treatment due to the safety of antibacterial 1-MAG additives.

Biodegradable engineered fiber scaffolds fabricated by electrospinning for periodontal tissue regeneration

Considering the specificity of periodontium and the unique advantages of electrospinning, this technology has been used to fabricate biodegradable tissue engineering materials for functional periodontal regeneration. For better biomedical quality, a continuous technological progress of electrospinning has been performed. Based on property of materials (natural, synthetic or composites) and additive novel methods (drug loading, surface modification, structure adjustment or 3 D technique), various novel membranes and scaffolds that could not only relief inflammation but also influence the biological behaviors of cells have been fabricated to achieve more effective periodontal regeneration. This review provides an overview of the usage of electrospinning materials in treatments of periodontitis, in order to get to know the existing research situation and find treatment breakthroughs of the periodontal diseases.

Novel Polyvinyl Butyral/Monoacylglycerol Nanofibrous Membrane with Antifouling Activity

Monoacylglycerols (MAGs) have proven of great interest to the foodstuffs industry due to the promising antibacterial activity they show for controlling microbial contamination. Prior to this paper, this antibacterial agent had not been incorporated in a nanofibrous membrane. This study details convenient fabrication of nanofibrous membranes based on polyvinyl butyral (PVB) containing various concentrations of monocaprin (MAG 10) by an electrospinning process. Increasing the concentration of MAG 10 caused differences to appear in the shape of the nanofibers, in addition to which the level of wettability was heightened. Besides exhibiting antibacterial properties, the functional membranes demonstrated especially good antifouling activity. The novel and efficient nanofibrous membranes described have the potential to find eventual application in medical or environmental fields.

Antimicrobial lipids in nano-carriers for antibacterial delivery

Antimicrobial lipids have been recognised as broad-spectrum antibacterial agents. They can directly act on and lyse bacterial cell membrane, and inhibit bacterial growth through a range of mechanisms. Antimicrobial lipids include free fatty acids, monoglycerides, cholesteryl ester, sphingolipids and etc., with the first two being the most extensively studied. Their application is usually hindered by the low solubility of the compounds themselves, and nano-sized lipid-based carriers can endow druggability to these antimicrobial agents for they improve lipid solubility and dispersion in aqueous formulations. Nano-carriers also possess advantages in overcoming drug resistance. In this review we will discuss different kinds of antimicrobial lipids in nano-sized carriers for antibacterial delivery. CAL02 as a promising infection-controlling liposome consisted of cholesterol and sphingomyelin will also be included for it's a unique anti-infection approach, which signifies that the underlying antibacterial roles antimicrobial lipids needs to be further addressed. With the global emergence of antibiotic resistance, antimicrobial lipids formulated in nano-carriers might provide a novel alternative in combatting infectious diseases.

Monomyristin and Monopalmitin Derivatives: Synthesis and Evaluation as Potential Antibacterial and Antifungal Agents

In the present work, monoacylglycerol derivatives, i.e., 1-monomyristin, 2-monomyristin, and 2-monopalmitin were successfully prepared from commercially available myristic acid and palmitic acid. The 1-monomyristin compound was prepared through a transesterification reaction between ethyl myristate and 1,2-O-isopropylidene glycerol, which was obtained from the protection of glycerol with acetone, then followed by deprotection using Amberlyst-15. On the other hand, 2-monoacylglycerol derivatives were prepared through enzymatic hydrolysis of triglycerides in the presence of Thermomyces lanuginosa lipase enzymes. The synthesized products were analyzed using fourier transform infrared (FTIR) spectrophotometer, gas or liquid chromatography-mass spectrometer (GC-MS or LC-MS), and proton and carbon nuclear magnetic resonance (¹H- and 13C-NMR) spectrometers. It was found that monomyristin showed high antibacterial and antifungal activities, while 2-monopalmitin did not show any activity at all. The 1-monomyristin compound showed higher antibacterial activity against Staphylococcus aureus and Aggregatibacter actinomycetemcomitans and also higher antifungal activity against Candida albicans compared to the positive control. Meanwhile, 2-monomyristin showed high antibacterial activity against Escherichia coli. The effect of the acyl position and carbon chains towards antibacterial and antifungal activities was discussed.

Special issue: Pharmaceutical innovation

"Pharmaceutical innovation" is an interdisciplinary area of the pharmaceutical sciences including drug development with a focus on manufacturing, process control, and technology, among many other subfields of research. In this special issue, we have invited all participants attended the International Conference and Exhibition on Pharmaceutical Sciences and Technology 2018 under the theme of pharmaceutical innovation and translational research for human health, held in Bangkok during January 24-25, 2018, to submit the research papers and after peer-review process, 10 of them were selected.