Drug-drug cocrystals: Opportunities and challenges

Indomethacin-omeprazole as therapeutic hybrids? Salt and co-amorphous systems enhancing physicochemical and pharmacological properties

Multidrug therapeutic hybrids constitute a promising proposal to overcome problems associated with traditional formulations containing physical mixtures of drugs, potentially improving pharmacological and pharmaceutical performance. Indomethacin (IND) is a non-selective non-steroidal anti-inflammatory drug (NSAIDs) that acts by inhibiting normal processes of homeostasis, causing a series of side effects, such as gastrointestinal symptoms. Proton pump inhibitors, such as omeprazole (OME), have been used to treat such gastrointestinal tract symptoms. In this work, two new multidrug therapeutic hybrids were prepared (an IND:OME salt and an IND:OME co-amorphous system) by ball mill grinding crystalline IND and OME under different conditions, i.e., liquid assisted grinding (LAG) with ethanol and dry grinding, respectively. The crystalline salt returned to a neutral state co-amorphous system when submitted to ball mill grinding in the absence of solvent (dry grinding), but the reverse process (LAG of the IND:OME co-amorphous system) showed partial decomposition of OME. The IND:OME co-amorphous system showed a higher physical stability than the neat IND and OME amorphous materials (with an amorphous stability longer than 100 days, compared to 4 and 16 h for the neat amorphous drugs, respectively, when stored at dry conditions at room temperature). Furthermore, OME presented a higher chemical stability in solution when dissolved from a salt form than from the pure crystalline form. The dissolution studies showed a dissolution enhancement for IND in both salt (1.8-fold after 8 h of dissolution) and co-amorphous (2.5-fold after 8 h of dissolution) forms. Anti-inflammatory activity using a mice paw oedema model showed an increase of the pharmacological response to IND at a lower dose (∼5mg/kg) for both IND:OME salt (2.8-fold) and IND:OME co-amorphous system (3.2-fold) after 6 h, when compared to the positive control group (IND, administered at 10 mg/kg). Additionally, the anti-inflammatory activity of both salt and co-amorphous form was faster than for the crystalline IND. Finally, an indomethacin-induced gastric ulceration assay in mice resulted in a higher mucosal protection at the same dose (40 mg/kg) for both IND:OME salt and IND:OME co-amorphous system when compared with crystalline OME.

Complementary supramolecular drug associates in perfecting the multidrug therapy against multidrug resistant bacteria

The inappropriate and inconsistent use of antibiotics in combating multidrug-resistant bacteria exacerbates their drug resistance through a few distinct pathways. Firstly, these bacteria can accumulate multiple genes, each conferring resistance to a specific drug, within a single cell. This accumulation usually takes place on resistance plasmids (R). Secondly, multidrug resistance can arise from the heightened expression of genes encoding multidrug efflux pumps, which expel a broad spectrum of drugs from the bacterial cells. Additionally, bacteria can also eliminate or destroy antibiotic molecules by modifying enzymes or cell walls and removing porins. A significant limitation of traditional multidrug therapy lies in its inability to guarantee the simultaneous delivery of various drug molecules to a specific bacterial cell, thereby fostering incremental drug resistance in either of these paths. Consequently, this approach prolongs the treatment duration. Rather than using a biologically unimportant coformer in forming cocrystals, another drug molecule can be selected either for protecting another drug molecule or, can be selected for its complementary activities to kill a bacteria cell synergistically. The development of a multidrug cocrystal not only improves tabletability and plasticity but also enables the simultaneous delivery of multiple drugs to a specific bacterial cell, philosophically perfecting multidrug therapy. By adhering to the fundamental tenets of multidrug therapy, the synergistic effects of these drug molecules can effectively eradicate bacteria, even before they have the chance to develop resistance. This approach has the potential to shorten treatment periods, reduce costs, and mitigate drug resistance. Herein, four hypotheses are presented to create complementary drug cocrystals capable of simultaneously reaching bacterial cells, effectively destroying them before multidrug resistance can develop. The ongoing surge in the development of novel drugs provides another opportunity in the fight against bacteria that are constantly gaining resistance to existing treatments. This endeavour holds the potential to combat a wide array of multidrug-resistant bacteria.

Combination Drug Therapy for the Management of Chronic Neuropathic Pain

Chronic neuropathic pain (NP) is an increasingly prevalent disease and leading cause of disability which is challenging to treat. Several distinct classes of drugs are currently used for the treatment of chronic NP, but each drug targets only narrow components of the underlying pathophysiological mechanisms, bears limited efficacy, and comes with dose-limiting side effects. Multimodal therapies have been increasingly proposed as potential therapeutic approaches to target the multiple mechanisms underlying nociceptive transmission and modulation. However, while preclinical studies with combination therapies showed promise to improve efficacy over monotherapy, clinical trial data on their efficacy in specific populations are lacking and increased risk for adverse effects should be carefully considered. Drug-drug co-crystallization has emerged as an innovative pharmacological approach which can combine two or more different active pharmaceutical ingredients in a single crystal, optimizing pharmacokinetic and physicochemical characteristics of the native molecules, thus potentially capitalizing on the synergistic efficacy between classes of drugs while simplifying adherence and minimizing the risk of side effects by reducing the doses. In this work, we review the current pharmacological options for the treatment of chronic NP, focusing on combination therapies and their ongoing developing programs and highlighting the potential of co-crystals as novel approaches to chronic NP management.

Molecular complexes of drug combinations: A review of cocrystals, salts, coamorphous systems and amorphous solid dispersions

As the advancements in the medical technology and healthcare develop through the years, combinational therapy has evolved to be an important treatment modality in many disease settings, including cancer, cardiovascular disease and infectious diseases. In an effort to alleviate "pill burden" and improve patient compliance, fixed dose combinations (FDCs) have been developed to be used as effective therapeutics. Among all FDCs, the category of drug-drug molecular complexes has been proven an efficient methodology in designing and treating diseases, with many drugs being approved. Among all drug-drug molecular complexes, drug-drug cocrystals, salts, coamorphous systems and solid dispersions have been successfully developed and many have been approved by the FDA. In this review, we dwell deeply into the molecular mechanisms behind the different types of drug-drug molecular complexes, including the key functional groups involved in the intermolecular interactions, the applications of each category of molecular complexes, as well as the advantages and challenges thereof. This comprehensive review provides useful insights into the practical design and manufacture of drug-drug molecular complexes and points out the future direction for the development of new advantageous combinational therapies that benefit more patients.

A Metformin-Ferulic Acid Salt with Improved Biopharmaceutical Parameters

Though ferulic acid presents great hypoglycemic potential, it possesses limited aqueous solubility, and low oral bioavailability. When associated with metformin, the first-choice drug in Type 2 diabetes treatment, FA demonstrates synergistic hypoglycemic effects, however, it also causes certain undesirable dose-related effects. This study aimed to develop a new ferulic acid - metformin multicomponent system, and incorporate it into a solid dosage form with improved biopharmaceutical parameters. A novel metformin: ferulate (1:1) salt (MFS) was produced, which was properly characterized using differing analytical techniques, including single crystal analysis. Also during the course of the study, a new polymorph of the metformin free base was observed. The MFS was obtained using solvent evaporation methods, which achieved high yields in reproducible process, as well as a 740-fold increase in ferulic acid aqueous solubility. The MFS tablets developed met quality control requirements for this dosage form, as well as revealing excellent performance in vitro dissolution tests, presenting dissolution efficiency values of 95.4 ± 0.5%. Additionally, physicochemical instability was not observed in a study at 40 °C for 3 months for both MFS powder and its tablet form. The MFS product developed is a promising candidate for further Type 2 diabetes clinical study.

Tinkering with Mechanochemical Tools for Scale Up

Mechanochemistry provides an environmentally benign platform to develop more sustainable chemical processes by limiting raw materials, energy use, and waste generation while using physically smaller equipment. A continuously growing research community has steadily showcased examples of beneficial mechanochemistry applications at both the laboratory and the preparative scale. In contrast to solution-based chemistry, mechanochemical processes have not yet been standardized, and thus scaling up is still a nascent discipline. The purpose of this Minireview is to highlight similarities, differences and challenges of the various approaches that have been successfully applied for a range of chemical applications at various scales. We hope to provide a discussion starting point for those interested in further developing mechanochemical processes for commercial use and/or industrialisation.

Praziquantel meets Niclosamide: A dual-drug Antiparasitic Cocrystal

In this paper we report a successful example of combining drugs through cocrystallization. Specifically, the novel solid is formed by two anthelminthic drugs, namely praziquantel (PZQ) and niclosamide (NCM) in a 1:3 molar ratio, and it can be obtained through a sustainable one-step mechanochemical process in the presence of micromolar amounts of methanol. The novel solid phase crystallizes in the monoclinic space group of P21/c, showing one PZQ and three NCM molecules linked through homo- and heteromolecular hydrogen bonds in the asymmetric unit, as also attested by SSNMR and FT-IR results. A plate-like habitus is evident from scanning electron microscopy analysis with a melting point of 202.89 °C, which is intermediate to those of the parent compounds. The supramolecular interactions confer favorable properties to the cocrystal, preventing NCM transformation into the insoluble monohydrate both in the solid state and in aqueous solution. Remarkably, the PZQ - NCM cocrystal exhibits higher anthelmintic activity against in vitro S. mansoni models than corresponding physical mixture of the APIs. Finally, due to in vitro promising results, in vivo preliminary tests on mice were also performed through the administration of minicapsules size M.

One Step In Situ Co-Crystallization of Dapsone and Polyethylene Glycols during Fluidized Bed Granulation

Several studies have demonstrated the feasibility of in situ co-crystallization in different pharmaceutical processes such as spray drying, hot melt extrusion, and fluidized bed granulation (FBG) to produce co-crystal-in-excipient formulations. However, no previous studies have examined such a one step in situ co-crystallization process for co-crystal formulations where the coformer is a polymer. In the current study, we explored the use of FBG to produce co-crystal granules of dapsone (DAP) and different molecular weight polyethylene glycols (PEGs). Solvent evaporation (SE) was proven to generate DAP-PEGs co-crystals at a particular weight ratio of 55:45 w/w between DAP and PEG, which was subsequently used in FBG, using microcrystalline cellulose and hydroxypropyl methyl cellulose as filler excipient and binder, respectively. FBG could generate co-crystals with higher purity than SE. Granules containing DAP-PEG 400 co-crystal could be prepared without any additional binder. DAP-PEG co-crystal granules produced by FBG demonstrated superior pharmaceutical properties, including flow properties and tableting properties, compared to DAP and DAP-PEG co-crystals prepared by SE. Overall, in situ co-crystallization via FBG can effectively produce API-polymer co-crystals and enhance the pharmaceutical properties.

Preparation, Crystal Structure, Supramolecular Assembly, and DFT Studies of Two Organic Salts Bearing Pyridine and Pyrimidine

The effective preparation of two new pyrimidine- and pyridine-based organic crystalline salts with substituted acidic moieties (i.e., (Z)-4-(naphthalen-2-ylamino)-4-oxobut-2-enoic acid (DCNO) and 2-hydroxy-3,5-dinitrobenzoic acid (PCNP)) using methanol as a solvent has been reported. These molecular salts have ionic interactions that are responsible for their structural stabilization in their solid-state assemblies. The crystal structures of DCNO and PCNP were determined by the single-crystal X-ray diffraction (SCXRD) technique. The SCXRD study inferred that cations and anions are strongly packed due to N-H···O, N-H···N, and C-H···O noncovalent interactions in DCNO, whereas in PCNP, N-H···N noncovalent interactions are absent. The noncovalent interactions in both organic crystalline salts were comprehensively investigated by Hirshfeld surface analysis. Further, a detailed density functional theory (DFT) study of both compounds was performed. The optimized structures of both compounds supported the existence of the H-bonding and weak dispersion interactions in the synthesized organic crystalline salt structures. Both compounds were shown to have large and noticeably different HOMO/LUMO energy gaps. The atomic charge analysis results supported the SCXRD and HSA results, showing the formation of intermolecular noncovalent interactions in both organic crystalline salts. The results of the natural bond orbital (NBO) analysis confirmed the existence of (relatively weak) noncovalent interactions between the cation and anion moieties of their organic crystalline salts. The global reactivity parameters (GRPs) analysis showed that both organic crystalline salts' compounds should be quite thermodynamically stable and that DCNO should be less reactive than PCNP. For both compounds, the molecular electrostatic potential (MEP) analysis results support the existence of intermolecular electrostatic interactions in their organic crystalline salts.

Dabrafenib-Panobinostat Salt: Improving the Dissolution Rate and Inhibition of BRAF Melanoma Cells

Cocrystallization of the drug-drug salt-cocrystal of the histone deacetylase inhibitor (HDACi) panobinostat (PAN) and b-rapidly accelerated fibrosarcoma (BRAF) inhibitor dabrafenib (DBF) afforded single crystals of a two-drug salt stabilized by N⁺-H···O and N⁺-H···N^- hydrogen bonds between the ionized panobinostat ammonium donor and dabrafenib sulfonamide anion acceptor in a 12-member ring motif. A faster dissolution rate for both drugs was achieved through the salt combination compared to the individual drugs in an aqueous acidic medium. The dissolution rate exhibited a peak concentration (C_max) of approximately 310 mg cm^-2 min^-1 for PAN and 240 mg cm^-2 min^-1 for DBF at a T_max of less than 20 min under gastric pH 1.2 (0.1 N HCl) compared to the pure drug dissolution values of 10 and 80 mg cm^-2 min^-1, respectively. The novel and fast-dissolving salt DBF^-·PAN⁺ was analyzed in BRAF^V600E melanoma cells Sk-Mel28. DBF^-·PAN⁺ reduced the dose-response from micromolar to nanomolar concentrations and lowered IC₅₀ (21.9 ± 7.2 nM) by half compared to PAN alone (45.3 ± 12.0 nM). The enhanced dissolution and lower survival rate of melanoma cells show the potential of novel DBF^-·PAN⁺ salt in clinical evaluation.

Ketoprofen, lysine and gabapentin co-crystal magnifies synergistic efficacy and tolerability of the constituent drugs: Pre-clinical evidences towards an innovative therapeutic approach for neuroinflammatory pain

Chronic pain is an enormous public health concern, and its treatment is still an unmet medical need. Starting from data highlighting the promising effects of some nonsteroidal anti-inflammatory drugs in combination with gabapentin in pain treatment, we sought to combine ketoprofen lysine salt (KLS) and gabapentin to obtain an effective multimodal therapeutic approach for chronic pain. Using relevant in vitro models, we first demonstrated that KLS and gabapentin have supra-additive effects in modulating key pathways in neuropathic pain and gastric mucosal damage. To leverage these supra-additive effects, we then chemically combined the two drugs via co-crystallization to yield a new compound, a ternary drug-drug co-crystal of ketoprofen, lysine and gabapentin (KLS-GABA co-crystal). Physicochemical, biodistribution and pharmacokinetic studies showed that within the co-crystal, ketoprofen reaches an increased gastrointestinal solubility and permeability, as well as a higher systemic exposure in vivo compared to KLS alone or in combination with gabapentin, while both the constituent drugs have increased central nervous system permeation. These unique characteristics led to striking, synergistic anti-nociceptive and anti-inflammatory effects of KLS-GABA co-crystal, as well as significantly reduced spinal neuroinflammation, in translational inflammatory and neuropathic pain rat models, suggesting that the synergistic therapeutic effects of the constituent drugs are further boosted by the co-crystallization. Notably, while strengthening the therapeutic effects of ketoprofen, KLS-GABA co-crystal showed remarkable gastrointestinal tolerability in both inflammatory and chronic neuropathic pain rat models. In conclusion, these results allow us to propose KLS-GABA co-crystal as a new drug candidate with high potential clinical benefit-to-risk ratio for chronic pain treatment.

The Benefits and Challenges of Antibiotics-Non-Steroidal Anti-Inflammatory Drugs Non-Covalent Reaction

Recently, non-covalent reactions have emerged as approaches to improve the physicochemical properties of active pharmaceutical ingredients (API), including antibiotics and non-steroidal anti-inflammatory drugs (NSAIDs). This review aimed to present and discuss the non-covalent reaction products of antibiotics, including salt and neutral multi-component solid forms, by framing their substituents and molar ratios, manufacturing techniques, characterization methods, benefits, potency changes, and toxicity, and is completed with an analysis of the development of computational models used in this field. Based on the data, NSAIDs are the most-developed drugs in multi-component system preparations, followed by antibiotics, i.e., antituberculosis and fluoroquinolones. They have reacted with inorganic elements, excipients, nutraceuticals, natural products, and other drugs. However, in terms of treatments for common infections, fluoroquinolones are more frequently used. Generally, NSAIDs are acquired on an over-the-counter basis, causing inappropriate medication. In addition, the pKa differences between the two groups of medicine offer the potential for them to react non-covalently. Hence, this review highlights fluoroquinolone-NSAID multi-component solid systems, which offer some benefits. These systems can increase patient compliance and promote the appropriate monitoring of drug usage; the dual drug multi-component solids have been proven to improve the physicochemical properties of one or both components, especially in terms of solubility and stability. In addition, some reports show an enhancement of the antibiotic activity of the products. However, it is important to consider the possibility of activity changes, interaction, and toxicity when using drug combinations. Hence, these aspects also are discussed in this review. Finally, we present computational modeling, which has been utilized broadly to support multi-component system designs, including coformer screening, preparation methods, and structural modeling, as well as to predict physicochemical properties, potency, and toxicity. This integrated review is expected to be useful for further antibiotic-NSAID multi-component system development.

A SWOT analysis of nano co-crystals in drug delivery: present outlook and future perspectives

The formulation of poorly soluble drugs is an intractable challenge in the field of drug design, development and delivery. This is particularly problematic for molecules that exhibit poor solubility in both organic and aqueous media. Usually, this is difficult to resolve using conventional formulation strategies and has resulted in many potential drug candidates not progressing beyond early stage development. Furthermore, some drug candidates are abandoned due to toxicity or have an undesirable biopharmaceutical profile. In many instances drug candidates do not exhibit desirable processing characteristics to be manufactured at scale. Nanocrystals and co-crystals, are progressive approaches in crystal engineering that can solve some of these limitations. While these techniques are relatively facile, they also require optimisation. Combining crystallography with nanoscience can yield nano co-crystals that feature the benefits of both fields, resulting in additive or synergistic effects to drug discovery and development. Nano co-crystals as drug delivery systems can potentially improve drug bioavailability and reduce the side-effects and pill burden of many drug candidates that require chronic dosing as part of treatment regimens. In addition, nano co-crystals are carrier-free colloidal drug delivery systems with particle sizes ranging between 100 and 1000 nm comprising a drug molecule, a co-former and a viable drug delivery strategy for poorly soluble drugs. They are simple to prepare and have broad applicability. In this article, the strengths, weaknesses, opportunities and threats to the use of nano co-crystals are reviewed and a concise incursion into the salient aspects of nano co-crystals is undertaken.

Melt Crystallization of Celecoxib-Carbamazepine Cocrystals with the Synchronized Release of Drugs

PURPOSE

The fixed-dose combination drug products have been increasingly used to treat some complex diseases. A cocrystal containing two therapeutic components, named as a drug-drug cocrystal, is an ideal solid form to formulate as a fixed-dose combination product. The aim of the study is to prepare celecoxib-carbamazepine (CEL-CBZ) cocrystals by melt crystallization to achieve the synchronized release of drugs.

METHOD

The crystal structure of the CEL-CBZ cocrystal was determined from the cocrystals harvested from melt by single crystal X-ray diffraction. The binary phase diagram and crystal growth kinetics of the CEL-CBZ cocrystal from melt were studied to optimize the process parameters of hot-melt extrusion for manufacturing large-scale cocrystals. The intrinsic dissolution rate studies were conducted to compare the dissolution profiles of drugs in the cocrystal and their individual forms.

RESULT

The CEL-CBZ cocrystal crystallized in the triclinic space group with one CEL and one CBZ molecule in the asymmetric unit. The crystallization of CEL-CBZ cocrystals were observed both in the supercooled liquid and glassy state. The formation of drug-drug cocrystals significantly alter the intrinsic dissolution rates of the parent drugs to favor the synchronized release.

CONCLUSION

Melt crystallization is an alternative, efficient and eco-friendly approach for preparing drug-drug cocrystals on a large scale. The synchronized drug release by drug-drug cocrystals can be used to modulate the release profiles of parent drugs in the fixed-dose combination products.

Data-Driven Prediction of the Formation of Co-Amorphous Systems

Co-amorphous systems (COAMS) have raised increasing interest in the pharmaceutical industry, since they combine the increased solubility and/or faster dissolution of amorphous forms with the stability of crystalline forms. However, the choice of the co-former is critical for the formation of a COAMS. While some models exist to predict the potential formation of COAMS, they often focus on a limited group of compounds. Here, four classes of combinations of an active pharmaceutical ingredient (API) with (1) another API, (2) an amino acid, (3) an organic acid, or (4) another substance were considered. A model using gradient boosting methods was developed to predict the successful formation of COAMS for all four classes. The model was tested on data not seen during training and predicted 15 out of 19 examples correctly. In addition, the model was used to screen for new COAMS in binary systems of two APIs for inhalation therapy, as diseases such as tuberculosis, asthma, and COPD usually require complex multidrug-therapy. Three of these new API-API combinations were selected for experimental testing and co-processed via milling. The experiments confirmed the predictions of the model in all three cases. This data-driven model will facilitate and expedite the screening phase for new binary COAMS.

A new Febuxostat-Telmisartan Drug-Drug Cocrystal for Gout-Hypertension Combination Therapy

Drug-drug cocrystalllization is a novel mechanism for effective pharmacological combination therapy. In this work, we have demonstrated the preparation of a drug-drug cocrystal of a hypertension drug (Telmisartan; TEL) with a hyperuricemia drug (Febuxostat; FEB) in 1:1 molar ratio using a solvent evaporation method for the first time. Generally, a multi-component system may yield either a eutectic, salt, and/or a cocrystal. This study adopted a methodical orthogonal framework to analyze the final solid form. A single crystal X-ray structural investigation revealed the formation of a heterosynthon with carboxylic and benzimidazole groups of FEB and TEL, respectively, in the triclinic P-1 space group. ΔpKa of the heterosynthon is ∼1.5, hence, based on the empirical rules, a salt-cocrystal continuum is hypothesized. Further, attenuated total reflectance Fourier transform infrared (ATR-FTIR), and Raman spectroscopy were employed to corroborate the hydrogen bond formation in the heterosynthon (-N---H-O-), which confirmed the propensity for cocrystal formation. An accelerated stability study and an in vitro biorelevant dissolution study of the cocrystal were performed, which demonstrated that it is physiochemically stable, but it resulted in a slower dissolution rate when compared with plain drugs.

Complexation: An Interesting Pathway for Combining Two APIs at the Solid State

Combining different drugs into a single crystal form is one of the current challenges in crystal engineering, with the number of reported multi-drug solid forms remaining limited. This paper builds upon an efficient approach to combining Active Pharmaceutical Ingredients (APIs) containing carboxylic groups in their structure with APIs containing pyridine moieties. By transforming the former into their zinc salts, they can be successfully combined with the pyridine-containing APIs. This work highlights the successfulness of this approach, as well as the improvement in the physical properties of the obtained solid forms.

Nano- and Crystal Engineering Approaches in the Development of Therapeutic Agents for Neoplastic Diseases

Cancer is a leading cause of death worldwide. It is a global quandary that requires the administration of many different active pharmaceutical ingredients (APIs) with different characteristics. As is the case with many APIs, cancer treatments exhibit poor aqueous solubility which can lead to low drug absorption, increased doses, and subsequently poor bioavailability and the occurrence of more adverse events. Several strategies have been envisaged to overcome this drawback, specifically for the treatment of neoplastic diseases. These include crystal engineering, in which new crystal structures are formed to improve drug physicochemical properties, and/or nanoengineering in which the reduction in particle size of the pristine crystal results in much improved physicochemical properties. Co-crystals, which are supramolecular complexes that comprise of an API and a co-crystal former (CCF) held together by non-covalent interactions in crystal lattice, have been developed to improve the performance of some anti-cancer drugs. Similarly, nanosizing through the formation of nanocrystals and, in some cases, the use of both crystal and nanoengineering to obtain nano co-crystals (NCC) have been used to increase the solubility as well as overall performance of many anticancer drugs. The formulation process of both micron and sub-micron crystalline formulations for the treatment of cancers makes use of relatively simple techniques and minimal amounts of excipients aside from stabilizers and co-formers. The flexibility of these crystalline formulations with regards to routes of administration and ability to target neoplastic tissue makes them ideal strategies for effectiveness of cancer treatments. In this review, we describe the use of crystalline formulations for the treatment of various neoplastic diseases. In addition, this review attempts to highlight the gaps in the current translation of these potential treatments into authorized medicines for use in clinical practice.

Cocrystals of tuberculosis antibiotics: Challenges and missed opportunities

Cocrystals have been extensively used to improve the physicochemical properties and bioavailability of active pharmaceutical ingredients. Cocrystals of anti-tuberculosis medications are among those commonly reported. This review provides a summary of the tuberculosis antibiotic cocrystals reported in the literature, providing the main results on current tuberculosis medications utilized in cocrystals. Moreover, anti-tuberculosis cocrystals limitations and advantages are described, including evidence for enhanced solubility, stability and effect. Opportunities to enhance anti-tuberculosis medications and fixed dose combinations using cocrystals are given. Several cocrystal pairs are suggested to enhance the effectiveness of anti-tuberculosis drugs.

A molecularly enhanced proof of concept for targeting cocrystals at molecular scale in continuous pharmaceuticals cocrystallization

It is impossible to optimize a process for a target drug product with the desired profile without a proper understanding of the interplay among the material attributes, the process parameters, and the attributes of the drug product. There is a particular need to bridge the micro- and mesoscale events that occur during this process. Here, we propose а molecular engineering methodology for the continuous cocrystallization process, based on Raman spectra measured experimentally with a probe and from quantum mechanical calculations. Using molecular dynamics simulations, the theoretical Raman spectra were calculated from first principles for local mixture structures under an external shear force at various temperatures. A proof of concept is developed to build the process design space from the computed data. We show that the determined process design space provides valuable insight for optimizing the cocrystallization process at the nanoscale, where experimental measurements are difficult and/or inapplicable. The results suggest that our method may be used to target cocrystallization processes at the molecular scale for improved pharmaceutical synthesis.

Exploration of Fulvic Acid as a Co-Former in Crystal Engineering

The aim of the project was to investigate Peat-derived Fulvic acid for its propensity to form co-crystals with quercetin and curcumin and characterize it by using different analytical techniques. The formation of co-crystals generally enhances water solubility and the overall bioavailability of molecules. Co-crystals were synthesized using a 1:1 stoichiometric ratio of fulvic acid with quercetin and curcumin, respectively, using solvent crystallization techniques taking tetrahydrofuran and water in a 1:1 v/v ratio. The co-crystals were characterized by spectroscopic methods, FTIR and Differential scanning calorimetry. Further confirmation was made by morphological studies using SEM. A structural analysis was also carried out, using 13C solid-state NMR analysis. The studies confirmed the formation of semi crystalline forms. Furthermore, the saturation solubility displayed the enhancement in solubility of up to 10, 5-folds for Quercetin and Curcumin, respectively. The in vitro dissolution results showed that T50% was achieved within 30 min for both the drugs. The literature supports that the nutraceutical co-crystals offer advantages, particularly in the improvement of biopharmaceutical properties and addressing the challenges of the lab and manufacturing scale process. Both the semi crystalline powders exhibited enhanced solubility and a better dissolution profile.

First and Second Dissociation Enthalpies in Bi-Component Crystals Consisting of Maleic Acid and L-Phenylalanine

The energetics of the stepwise dissociation of a A:B₂ bi-component crystal, according to A:B₂(cr) → A:B(cr) + B(cr) and A:B(cr) → A(cr) + B(cr), was investigated using MA:Phe₂ and MA:Phe (MA = maleic acid; Phe = L-phenylalanine) as model systems. The enthalpy changes associated with these sequential processes and with the overall dissociation reaction A:B₂(cr) → A(cr) + 2B(cr) were determined by solution calorimetry. It was found that they are all positive, indicating that there is a lattice enthalpy gain when MA:Phe₂ is formed, either from the individual precursors or by adding Phe to MA:Phe. Single-crystal X-ray diffraction (SCXRD) analysis showed that MA:Phe₂ is best described as a protic salt containing a maleate anion (MA⁻) and two non-equivalent L-phenylalanine units, both linked to MA⁻ by NH···O hydrogen bonds (H-bond): one of these units is protonated (HPhe⁺) and the other zwitterionic (Phe^±). Only MA⁻ and HPhe⁺ molecules are present in the MA:Phe lattice. In this case, however, NH···O and OH···O H-bonds are formed between each MA⁻ unit and two HPhe⁺ molecules. Despite these structural differences, the enthalpy cost for the removal of the zwitterionic Phe^± unit from the MA:Phe₂ lattice to yield MA:Phe is only 0.9 ± 0.4 kJ mol⁻¹ higher than that for the dissociation of MA:Phe, which requires a proton transfer from HPhe⁺ to MA⁻ and the rearrangement of L-phenylalanine to the zwitterionic, Phe^±, form. Finally, a comparison of the dissociation energetics and structures of MA:Phe and of the previously reported glycine maleate (MA:Gly) analogue indicated that parameters, such as the packing coefficient, density, hydrogen bonds formed, or fusion temperature, are not necessarily good descriptors of dissociation enthalpy or lattice enthalpy trends when bi-component crystals with different molecular composition are being compared, even if the stoichiometry is the same.

An industrial perspective on co-crystals: Screening, identification and development of the less utilised solid form in drug discovery and development

Active pharmaceutical ingredients are commonly marketed as a solid form due to ease of transport, storage and administration. In the design of a drug formulation, the selection of the solid form is incredibly important and is traditionally based on what polymorphs, hydrates or salts are available for that compound. Co-crystals, another potential solid form available, are currently not as readily considered as a viable solid form for the development process. Even though co-crystals are gaining an ever-increasing level of interest within the pharmaceutical community, their acceptance and application is still not as standard as other solid forms such as the ubiquitous pharmaceutical salt and stabilised amorphous formulations. Presented in this chapter is information that would allow for a co-crystal screen to be planned and conducted as well as scaled up using solution and mechanochemistry based methods commonly employed in both the literature and industry. Also presented are methods for identifying the formation of a co-crystal using a variety of analytical techniques as well as the importance of confirming the formation of co-crystals from a legal perspective and demonstrating the legal precedent by looking at co-crystalline products already on the market. The benefits of co-crystals have been well established, and presented in this chapter are a selection of examples which best exemplify their potential. The goal of this chapter is to increase the understanding of co-crystals and how they may be successfully exploited in early stage development.

Amino Acids as the Potential Co-Former for Co-Crystal Development: A Review

Co-crystals are one of the most popular ways to modify the physicochemical properties of active pharmaceutical ingredients (API) without changing pharmacological activity through non-covalent interactions with one or more co-formers. A "green method" has recently prompted many researchers to develop solvent-free techniques or minimize solvents for arranging the eco-friendlier process of co-crystallization. Researchers have also been looking for less-risk co-formers that produce the desired API's physicochemical properties. This review purposed to collect the report studies of amino acids as the safe co-former and explored their advantages. Structurally, amino acids are promising co-former candidates as they have functional groups that can form hydrogen bonds and increase stability through zwitterionic moieties, which support strong interactions. The co-crystals and deep eutectic solvent yielded from this natural compound have been proven to improve pharmaceutical performance. For example, l-glutamine could reduce the side effects of mesalamine through an acid-base stabilizing effect in the gastrointestinal fluid. In addition, some amino acids, especially l-proline, enhances API's solubility and absorption in its natural deep eutectic solvent and co-crystals systems. Moreover, some ionic co-crystals of amino acids have also been designed to increase chiral resolution. Therefore, amino acids are safe potential co-formers, which are suitable for improving the physicochemical properties of API and prospective to be developed further in the dosage formula and solid-state syntheses.

Solution Cocrystallization: A Scalable Approach for Cocrystal Production

With an increasing interest in cocrystals due to various advantages, demand for large-scale cocrystallization techniques is rising. Solution cocrystallization is a solvent-based approach that utilizes several single-component crystallization concepts as well as equipment for generating cocrystals. Solution-based techniques can produce cocrystals with reasonable control on purity, size distribution, morphology, and polymorphic form. Many of them also offer a scalable solution for the industrial production of cocrystals. However, the complexity of the thermodynamic landscape and the kinetics of cocrystallization offers fresh challenges which are not encountered in single component crystallization. This review focuses on the recent developments in different solution cocrystallization techniques for the production of pharmaceutically relevant cocrystals. The review consists of two sections. The first section describes the various solution cocrystallization methods, highlighting their benefits and limitations. The second section emphasizes the challenges in developing these techniques to an industrial scale and identifies the major thrust areas where further research is required.

Fabrication of Carbamazepine Cocrystals: Characterization, In Vitro and Comparative In Vivo Evaluation

Carbamazepine (CBZ) is an antiepileptic drug having low bioavailability due to its hydrophobic nature. In the current study, efforts are made to investigate the effect of dicarboxylic acid coformer spacer groups (aliphatic chain length) on physicochemical properties, relative humidity (RH) stability, and oral bioavailability of CBZ cocrystals. Slurry crystallization technique was employed for the preparation of CBZ cocrystals with the following coformers: adipic (AA), glutaric (GA), succinic (SA), and malonic acid (MA). Powder X-ray diffractometry and Fourier-transform infrared spectroscopy confirmed cocrystal preparation. Physicochemical properties, RH stability, and oral bioavailability of cocrystals were investigated. Among the prepared cocrystals, CBZ-GA showed maximum solubility as well as improved dissolution profile (CBZ-GA > CBZ-MA > CBZ-AA > pure CBZ > CBZ-SA) in ethanol. Maximum RH stability was shown by CBZ-AA, CBZ-SA, and CBZ-MA. In vivo studies confirmed boosted oral bioavailability of cocrystals compared to pure CBZ. Furthermore, in vivo studies depicted the oral bioavailability order of cocrystals as CBZ-GA > CBZ-MA > Tegral® > CBZ-AA > CBZ-SA > pure CBZ. Thus, pharmaceutical scientists can effectively employ cocrystallization technique for tuning physicochemical properties of hydrophobic drugs to achieve the desired oral bioavailability. Overall, results reflect no consistent effect of spacer group on physicochemical properties, RH stability, and oral bioavailability of cocrystals.

Multicomponent crystals of an artemisinin derivative and cinchona alkaloids for use as antimalarial drugs

Multicomponent crystals of an artemisinin derivative and cinchona alkaloids were produced, combining two major types of antimalaria drugs with unique hydrogen bond interactions. These salts demonstrate a new category of antimalarial pharmaceuticals.

Cocrystal engineering of pharmaceutical solids: therapeutic potential and challenges

This highlight presents an overview of pharmaceutical cocrystal production and its potential in reviving problematic properties of drugs in different dosage forms. The challenges and future outlook of its translational development are discussed.