Analysis of impact of temperature and saltwater on Nannochloropsis salina bio-oil production by ultra high resolution APCI FT-ICR MS

Online Supercritical Fluid Chromatography Hyphenated to Fourier Transform Ion Cyclotron Resonance Mass Spectrometry with Quadrupole Detection for Microalgae Bio-Oil Characterization

Microalgae are an attractive feedstock for biofuel production thanks to their renewable nature, high growth rate, and ability to use anthropogenic CO2. The conversion of microalgae by hydrothermal liquefaction (HTL) leads to a solid residue, a gaseous phase, and a biocrude. However, the bio-oil is rich in heteroatoms and requires upgrading processes to be used as biofuels. For these treatments to be effective, detailed knowledge of the sample is crucial. The bio-oil was characterized by direct introduction into a Fourier transform ion cyclotron resonance mass spectrometer (DI-FTICR MS) with an electrospray ionization source (ESI). Thousands of molecular formulas were assigned with a high level of confidence, mainly compounds with nitrogen and oxygen atoms. Additionally, the bio-oil was analyzed by coupling supercritical fluid chromatography (SFC) and FTICR to combine the separation power of SFC to the high performances of a 12 T FTICR. Quadrupole detection (2ω) was used in FTICR to have a high resolving power with a lower transient time. The coupling allowed the separation of many isomers along the chromatogram, showing the isomeric complexity of microalgae bio-oils. Moreover, classes of compounds were separated according to their heteroatom class thanks to the SFC separation. In this work, the advantages of DI-FTICR MS and SFC-FTICR MS proved complementary, and DI was useful to study the bio-oil at the molecular scale thanks to the high performances, while SFC proved useful for the characterization at the isomeric scale. This demonstrated the significant potential of this new online hyphenated technique for the characterization of complex matrices.

Analytical Strategies Involved in the Detailed Componential Characterization of Biooil Produced from Lignocellulosic Biomass

Elucidation of chemical composition of biooil is essentially important to evaluate the process of lignocellulosic biomass (LCBM) conversion and its upgrading and suggest proper value-added utilization like producing fuel and feedstock for fine chemicals. Although the main components of LCBM are cellulose, hemicelluloses, and lignin, the chemicals derived from LCBM differ significantly due to the various feedstock and methods used for the decomposition. Biooil, produced from pyrolysis of LCBM, contains hundreds of organic chemicals with various classes. This review covers the methodologies used for the componential analysis of biooil, including pretreatments and instrumental analysis techniques. The use of chromatographic and spectrometric methods was highlighted, covering the conventional techniques such as gas chromatography, high performance liquid chromatography, Fourier transform infrared spectroscopy, nuclear magnetic resonance, and mass spectrometry. The combination of preseparation methods and instrumental technologies is a robust pathway for the detailed componential characterization of biooil. The organic species in biooils can be classified into alkanes, alkenes, alkynes, benzene-ring containing hydrocarbons, ethers, alcohols, phenols, aldehydes, ketones, esters, carboxylic acids, and other heteroatomic organic compounds. The recent development of high resolution mass spectrometry and multidimensional hyphenated chromatographic and spectrometric techniques has considerably elucidated the composition of biooils.

Theoretical Calculations on the Feasibility of Microalgal Biofuels: Utilization of Marine Resources Could Help Realizing the Potential of Microalgae

Microalgae have long been considered as one of most promising feedstocks with better characteristics for biofuels production over conventional energy crops. There have been a wide range of estimations on the feasibility of microalgal biofuels based on various productivity assumptions and data from different scales. The theoretical maximum algal biofuel productivity, however, can be calculated by the amount of solar irradiance and photosynthetic efficiency (PE), assuming other conditions are within the optimal range. Using the actual surface solar irradiance data around the world and PE of algal culture systems, maximum algal biomass and biofuel productivities were calculated, and feasibility of algal biofuel were assessed with the estimation. The results revealed that biofuel production would not easily meet the economic break‐even point and may not be sustainable at a large‐scale with the current algal biotechnology. Substantial reductions in the production cost, improvements in lipid productivity, recycling of resources, and utilization of non‐conventional resources will be necessary for feasible mass production of algal biofuel. Among the emerging technologies, cultivation of microalgae in the ocean shows great potentials to meet the resource requirements and economic feasibility in algal biofuel production by utilizing various marine resources.