Theoretical investigation of microalgae culture in the light changing conditions of solar photobioreactor production and comparison with cyanobacteria

New insights on the role of nitrogen in the resistance to environmental stress in an endosymbiotic dinoflagellate

Endosymbiotic dinoflagellates provide the nutritional basis for marine invertebrates, especially reef-building corals. These dinoflagellates are sensitive to environmental changes, and understanding the factors that can increase the resistance of the symbionts is crucial for the elucidation of the mechanisms involved with coral bleaching. Here, we demonstrate how the endosymbiotic dinoflagellate Durusdinium glynnii is affected by concentration (1760 vs 440 µM) and source (sodium nitrate vs urea) of nitrogen after light and thermal stress exposure. The effectiveness in the use of the two nitrogen forms was proven by the nitrogen isotopic signature. Overall, high nitrogen concentrations, regardless of source, increased D. glynnii growth, chlorophyll-a, and peridinin levels. During the pre-stress period, the use of urea accelerated the growth of D. glynnii compared to cells grown using sodium nitrate. During the luminous stress, high nitrate conditions increased cell growth, but no changes in pigments composition was observed. On the other hand, during thermal stress, a steep and steady decline in cell densities over time was observed, except for high urea condition, where there is cellular division and peridinin accumulation 72 h after the thermal shock. Our findings suggest peridinin has a protective role during the thermal stress, and the uptake of urea by D. glynnii can alleviate thermal stress responses, eventually mitigating coral bleaching events.

Investigation of the photosynthetic response of Chlorella vulgaris to light changes in a torus-shape photobioreactor

An efficient use of light is essential to achieve good performances in microalgae cultivation systems. This can be challenging particularly under solar conditions where light is highly dynamic (e.g., day/night cycles, rapid changes in wind and weather conditions). Microalgae display different mechanisms to optimize light use efficiency. In the short term, when high light is encountered, several processes of photoprotection can be involved to avoid cell damages (e.g., xanthophyll cycle). In the long term, when cells are exposed to a different light intensity, pigment content changes, i.e., photoacclimation. The purpose of this study is to investigate the photosynthetic response of Chlorella vulgaris cultures grown in closed lab-scale, torus-shape photobioreactor under well-controlled light conditions, namely, constant and dynamic light transitions. Experiments were conducted in continuous mode with detailed characterization of the light attenuation conditions for each condition, as represented by the mean rate of photon absorption (MRPA), so as to characterize the time responses of the photosynthetic cells toward light changes. This enables to observe short-term and long-term responses with their own characteristic times. The mechanisms involved were found to be different between increasing and decreasing light transitions. Furthermore the MRPA was found a valuable parameter to relate the effect of light to biological responses (i.e., pigment changes) under constant light and dynamic light conditions.Key points• MRPA proved valuable to relate C. vulgaris responses to light changes.• A linear evolution was found between pigment content and MRPA in continuous light.• A rising PFD step induced fast protection and acclimation mechanisms.

Cultivating Microalgae in Desert Conditions: Evaluation of the Effect of Light-Temperature Summer Conditions on the Growth and Metabolism of Nannochloropsis QU130

Temperature and light are two of the most crucial factors for microalgae production. Variations in these factors alter their growth kinetics, macromolecular composition and physiological properties, including cell membrane permeability and fluidity. The variations define the adaptation mechanisms adopted by the microalgae to withstand changes in these environmental factors. In the Qatar desert the temperature varies widely, typically between 10° and 45 °C There are also wide variations in light intensity, with values of over 1500 μmolhν.m−2s−1 in summer. A study of the effects of these thermal and light fluctuations is therefore essential for large-scale outdoor production systems, especially during the summer when temperature and light fluctuations are at their highest. The aim of this work is to study the impact of temperature and light intensity variations as encountered in summer period on the Nannochloropsis QU130 strain, which was selected for its suitability for outdoor cultivation in the harsh conditions of the Qatar desert. It was carried out using lab-scale photobioreactors enabling simulation of both constant and dynamic temperature and light regimes. Biomass productivity, cell morphology and biochemical compositions were examined first in constant conditions, then in typical outdoor cultivation conditions to elucidate the adjustments in cell function in respect of fluctuations. The dynamic light and temperature were shown to have interactive effects. The application of temperature cycles under constant light led to a 13.6% increase in biomass productivity, while a 45% decrease was observed under light and temperature regimes due to the combined stress. In all cases, the results proved that N. sp. QU130 has a high level of adaptation to the wide fluctuations in light and temperature stress. This was shown through its ability to easily change its physiology (cell size) and metabolic process in response to different cultivation conditions.

A review on photobioreactor design and modelling for microalgae production

From the cell to the photobioreactor and to the industrial exploitation of microalgae, through the controlled experiments and modelling.

Techno-Economic Study of CO2 Capture of a Thermoelectric Plant Using Microalgae (Chlorella vulgaris) for Production of Feedstock for Bioenergy

A current concern is the increase in greenhouse gas emissions, mainly CO2, with anthropogenic sources being the main contributors. Microalgae have greater capacity than terrestrial plants to capture CO2, with this being an attraction for using them as capture systems. This study aims at the techno-economic evaluation of microalgae biomass production, while only considering technologies with industrial scaling potential. Energy consumption and operating costs are considered as parameters for the evaluation. In addition, the capture of CO2 from a thermoelectric plant is analyzed, as a carbon source for the cultivation of microalgae. 24 scenarios were evaluated while using process simulation tools (SuperPro Designer), being generated by the combination of cultivations in raceway pond, primary harvest with three types of flocculants, secondary harvest with centrifugation and three filtering technologies, and finally the drying evaluated with Spray and Drum Dryer. Low biomass productivity, 12.7 g/m2/day, was considered, achieving a capture of 102.13 tons of CO2/year in 1 ha for the cultivation area. The scenarios that included centrifugation and vacuum filtration are the ones with the highest energy consumption. The operating costs range from US $ 4.75–6.55/kg of dry biomass. The choice of the best scenario depends on the final use of biomass.

Effect of design dark fraction on the loss of biomass productivities in photobioreactors

Design dark fraction reflects the unlit part of a microalgal culture system, as for example a hydraulic loop used for temperature or pH regulation, or a circulating pump for mixing purposes. This study investigates the impact of design dark fraction on photosynthetic biomass productivity of the eukaryotic microalgae Chlorella vulgaris. The effect of the volume of the dark fraction and the residence time spent in this dark fraction was investigated with two different nitrogen sources (N-NH₄⁺, N-NO₃^-). Results showed a decrease of biomass productivity when the volume of the dark fraction and the dark residence time increased. Up to 47% loss of biomass productivity could be reached for a design dark fraction [Formula: see text] = 30% of the total culture system volume. This loss was explained as a result of metabolic reactions related to an increase of respiration activity or a decrease of photosynthetic activity in the cells.

Photon management for augmented photosynthesis

Microalgae and cyanobacteria are some of nature's finest examples of solar energy conversion systems, effortlessly transforming inorganic carbon into complex molecules through photosynthesis. The efficiency of energy-dense hydrocarbon production by photosynthetic organisms is determined in part by the light collected by the microorganisms. Therefore, optical engineering has the potential to increase the productivity of algae cultivation systems used for industrial-scale biofuel synthesis. Herein, we explore and report emerging and promising material science and engineering innovations for augmenting microalgal photosynthesis.

Photosynthetic microalgae could provide an ecologically sustainable route to produce solar biofuels and high-value chemicals. Here, the authors review various optical management strategies used to manipulate the incident light in order to increase the efficiency of microalgae biofuel production.

Self-regulating genomic island encoding tandem regulators confers chromatic acclimation to marine Synechococcus

The evolutionary success of marine Synechococcus, the second-most abundant phototrophic group in the marine environment, is partly attributable to this group's ability to use the entire visible spectrum of light for photosynthesis. This group possesses a remarkable diversity of light-harvesting pigments, and most of the group's members are orange and pink because of their use of phycourobilin and phycoerythrobilin chromophores, which are attached to antennae proteins called phycoerythrins. Many strains can alter phycoerythrin chromophore ratios to optimize photon capture in changing blue-green environments using type IV chromatic acclimation (CA4). Although CA4 is common in most marine Synechococcus lineages, the regulation of this process remains unexplored. Here, we show that a widely distributed genomic island encoding tandem master regulators named FciA (for type four chromatic acclimation island) and FciB plays a central role in controlling CA4. FciA and FciB have diametric effects on CA4. Interruption of fciA causes a constitutive green light phenotype, and interruption of fciB causes a constitutive blue light phenotype. These proteins regulate all of the molecular responses occurring during CA4, and the proteins' activity is apparently regulated posttranscriptionally, although their cellular ratio appears to be critical for establishing the set point for the blue-green switch in ecologically relevant light environments. Surprisingly, FciA and FciB coregulate only three genes within the Synechococcus genome, all located within the same genomic island as fciA and fciB These findings, along with the widespread distribution of strains possessing this island, suggest that horizontal transfer of a small, self-regulating DNA region has conferred CA4 capability to marine Synechococcus throughout many oceanic areas.