Potential of five different isolated colonial algal species for wastewater treatment and biomass energy production

Thermal response analysis and compilation of cardinal temperatures for 424 strains of microalgae, cyanobacteria, diatoms and other species

Microalgae and other phototrophic microorganisms can be cultivated to produce food and valuable bioproducts, also allowing to remove nutrients from wastewater and CO₂ from biogas or polluted gas streams. Among other environmental and physico-chemical parameters, microalgal productivity is strongly influenced by the cultivation temperature. In this review, cardinal temperatures identifying the thermal response, i.e., the optimal growth condition (T_OPT), and the lower and upper limits for microalgae cultivation (T_MIN and T_MAX), have been included in a structured and harmonized database. Literature data for 424 strains belonging to 148 genera of green algae, cyanobacteria, diatoms, and other phototrophs were tabulated and analysed, with a focus on the most relevant genera that are currently cultivated at the industrial scale in Europe. The dataset creation aimed at facilitating the comparison of different strain performances for different operational temperatures and assisting in the process of thermal and biological modelling, to reduce energy consumption and biomass production costs. A case study was presented, to illustrate the effect of temperature control on the energetic expenditure for cultivating different Chorella sp. strains under a greenhouse located in different European sites.

Whey permeate as a phosphorus source for algal cultivation

Microalgal cultivation for biodiesel and feed requires recycled nutrient resources for a sustainable long-term operation. Whey permeate (WP) from dairy processing contains high organic load (lactose, oils, and proteins) and nitrogen (resources tested for microalgal cultivation) and organic phosphorus (P) that has not yet been tested as a P source for microalgal cultivation. We explored the potential of green algae strains (brackish) and polyculture (freshwater) in exploiting P from WP added to a medium based on either seawater (7 psu) or landfill leachate. Both strains showed a capacity of using organic P in WP with equal growth rates (0.94-1.12 d^-1 ) compared with chemical phosphate treatments (0.88-1.07 d^-1 ). The polyculture had comparable growth rate (0.25-0.57 d^-1 ) and biomass yield (152.1-357.5 mg L^-1 ) and similar or higher nutrient removal rate in the leachate-WP medium (1.3-6.4 mg L^-1  day^-1 nitrogen, 0.2-1.1 mg L^-1  day^-1 P) compared with the leachate-chemical phosphate medium (1.2-4.7 mg L^-1  day^-1 nitrogen, 0.3-1.4 mg L^-1  day^-1 P). This study showed that WP is a suitable P source for microalgal cultivation over a range of salinities. To date, this is the first study demonstrating that raw WP can replace mineral P fertilizer for algal cultivation. PRACTITIONERS POINTS: Whey permeate is a comparable phosphorus source to standard fertilizers used in algal cultivation. Green algae removed phosphorus effectively from whey permeate. Microalgal cultivation is a good approach for treatment of whey permeate in combination with a nitrogen-rich wastewater.

Sustainable production of biofuels from the algae-derived biomass

The worldwide fossil fuel reserves are rapidly and continually being depleted as a result of the rapid increase in global population and rising energy sector needs. Fossil fuels should not be used carelessly since they produce greenhouse gases, air pollution, and global warming, which leads to ecological imbalance and health risks. The study aims to discuss the alternative renewable energy source that is necessary to meet the needs of the global energy industry in the future. Both microalgae and macroalgae have great potential for several industrial applications. Algae-based biofuels can surmount the inadequacies presented by conventional fuels, thereby reducing the ‘food versus fuel’ debate. Cultivation of algae can be performed in all three systems; closed, open, and hybrid frameworks from which algal biomass is harvested, treated and converted into the desired biofuels. Among these, closed photobioreactors are considered the most efficient system for the cultivation of algae. Different types of closed systems can be employed for the cultivation of algae such as stirred tank photobioreactor, flat panel photobioreactor, vertical column photobioreactor, bubble column photobioreactor, and horizontal tubular photobioreactor. The type of cultivation system along with various factors, such as light, temperature, nutrients, carbon dioxide, and pH affect the yield of algal biomass and hence the biofuel production. Algae-based biofuels present numerous benefits in terms of economic growth. Developing a biofuel industry based on algal cultivation can provide us with a lot of socio-economic advantages contributing to a publicly maintainable result. This article outlines the third-generation biofuels, how they are cultivated in different systems, different influencing factors, and the technologies for the conversion of biomass. The benefits provided by these new generation biofuels are also discussed. The development of algae-based biofuel would not only change environmental pollution control but also benefit producers' economic and social advancement.

Graphical abstract

Microalgae bioreactor for nutrient removal and resource recovery from wastewater in the paradigm of circular economy

Every day, large quantities of wastewater are discharged from various sources that could be reused. Wastewater contains nutrients such as nitrogen or phosphorus, which can be recovered. Microalgae-based technologies have attracted attention in this sector, as they are able to bioremediate wastewater, harnessing its nutrients and generating algal biomass useful for different downstream uses, as well as having other advantages. There are multiple species of microalgae capable of growing in wastewater, achieving nutrient removal efficiencies surpassing 70%. On the other hand, microalgae contain lipids that can be extracted for energy recovery in biodiesel. Currently, there are several methods of lipid extraction from microalgae. Other biofuels can also be obtained from microalgae biomass, such as bioethanol, biohydrogen or biogas. This review also provides information on bioenergy products and products in the agri-food industry as well as in the field of human health based on microalgae biomass within the concept of circular bioeconomy.

Incorporation of Nanocatalysts for the Production of Bio-Oil from Staphylea holocarpa Wood

Biomass has been recognized as the most common source of renewable energy. In recent years, researchers have paved the way for a search for suitable biomass resources to replace traditional fossil fuel energy and provide high energy output. Although there are plenty of studies of biomass as good biomaterials, there is little detailed information about Staphylea holocarpa wood (S. holocarpa) as a potential bio-oil material. The purpose of this study is to explore the potential of S. holocarpa wood as a bio-oil. Nanocatalyst cobalt (II) oxide (Co₃O₄) and Nickel (II) oxide (NiO) were used to improve the production of bio-oil from S. holocarpa wood. The preparation of biofuels and the extraction of bioactive drugs were performed by the rapid gasification of nanocatalysts. The result indicated that the abundant chemical components detected in the S. holocarpa wood extract could be used in biomedicine, cosmetics, and biofuels, and have a broad industrial application prospect. In addition, nanocatalyst cobalt tetraoxide (Co₃O₄) could improve the catalytic cracking of S. holocarpa wood and generate more bioactive molecules at high temperature, which is conducive to the utilization and development of S. holocarpa wood as biomass. This is the first time that S. holocarpa wood was used in combination with nanocatalysts. In the future, nanocatalysts can be used to solve the problem of sustainable development of biological resources.

Evaluation of the effects of input variables on the growth of two microalgae classes during wastewater treatment

Wastewater treatment carried out by microalgae is usually affected by the type of algal strain and the combination of cultivation parameters provided during the process. Every microalga strain has a different tolerance level towards cultivation parameters, including temperature, pH, light intensity, CO2 content, initial inoculum level, pretreatment method, reactor type and nutrient concentration in wastewater. Therefore, it is vital to supply the right combination of cultivation parameters to increase the wastewater treatment efficiency and biomass productivity of different microalgae classes. In the current investigation, the decision tree was used to analyse the dataset of class Trebouxiophyceae and Chlorophyceae. Various combinations of cultivation parameters were determined to enhance their performance in wastewater treatment. Nine combinations of cultivation parameters leading to high biomass production and eleven combinations each for high nitrogen removal efficiency and high phosphorus removal efficiency for class Trebouxiophyceae were detected by decision tree models. Similarly, eleven combinations for high biomass production, nine for high nitrogen removal efficiency, and eight for high phosphorus removal efficiency were detected for class Chlorophyceae. The results obtained through decision tree analysis can provide the optimum conditions of cultivation parameters, saving time in designing new experiments for treating wastewater at a large scale.

A comprehensive review on the use of algal-bacterial systems for wastewater treatment with emphasis on nutrient and micropollutant removal

The scarcity of water resources and environmental pollution have highlighted the need for sustainable wastewater treatment. Existing conventional treatment systems are energy-intensive and not always able to meet stringent disposal standards. Recently, algal-bacterial systems have emerged as environmentally friendly sustainable processes for wastewater treatment and resource recovery. The algal-bacterial systems work on the principle of the symbiotic relationship between algae and bacteria. This paper comprehensively discusses the most recent studies on algal-bacterial systems for wastewater treatment, factors affecting the treatment, and aspects of resource recovery from the biomass. The algal-bacterial interaction includes cell-to-cell communication, substrate exchange, and horizontal gene transfer. The quorum sensing (QS) molecules and their effects on algal-bacterial interactions are briefly discussed. The effect of the factors such as pH, temperature, C/N/P ratio, light intensity, and external aeration on the algal-bacterial systems have been discussed. An overview of the modeling aspects of algal-bacterial systems has been provided. The algal-bacterial systems have the potential for removing micropollutants because of the diverse possible interactions between algae-bacteria. The removal mechanisms of micropollutants - sorption, biodegradation, and photodegradation, have been reviewed. The harvesting methods and resource recovery aspects have been presented. The major challenges associated with algal-bacterial systems for real scale implementation and future perspectives have been discussed. Integrating wastewater treatment with the algal biorefinery concept reduces the overall waste component in a wastewater treatment system by converting the biomass into a useful product, resulting in a sustainable system that contributes to the circular bioeconomy.

Species delimitation and microalgal cryptic diversity analysis of the genus Micractinium (Chlorophyta)

In this article, the system of the green microalgal genus Micractinium, based on morphological, physiological, ecological and molecular data, is considered. The main diagnostic species characteristics and the taxonomic placement of some taxa are also discussed. Phylogenetic analysis showed that the genus Micractinium is characterized by high cryptic diversity. The algorithms used for species delimitation had different results on the number of potentially species-level clusters allocated. The ABGD method was less “sensitive”. The tree-based approaches GMYC and PTP showed a more feasible taxonomy of the genus Micractinium, being an effective additional tool for distinguishing species. The clustering obtained by the latter two methods is in good congruence with morphological (cell size and shape, ability to form colonies, production of bristles, chloroplast type), physiological (vitamin requirements, reaction to high and low temperatures), molecular (presence of introns, level of genetic differences, presence of CBCs or special features of the secondary structure in ITS1 and ITS2) and ecological characteristics (habitat). The polyphyly of the holotype of the genus M. pusillum as well as M. belenophorum is shown. The intron was effective as an additional tool for distinguishing species, and the results of the intron analysis should be taken into account together with other characteristics. The CBC approach, based on the search for compensatory base changes in conservative ITS2 regions, was successful only for distinguishing cryptic species from “true” members of M. pusillum. Therefore, to distinguish species, it is more effective to take into account all the CBC in ITS1 and ITS2 and analyze characteristic structural differences (molecular signatures) in the secondary structure of internal transcribed spacers. The genetic distances analysis of 18S–ITS1–5.8S–ITS2 nucleotide sequences showed that intraspecific differences in the genus ranged from 0 to 0.5 % and interspecific differences, from 0.6 to 4.7 %. Due to the polyphasic approach, it was possible to characterize 29 clusters and phylogenetic lines at the species level within the genus Micractinium and to make assumptions about the species.

Biological Approaches Integrating Algae and Bacteria for the Degradation of Wastewater Contaminants-A Review

The traditional approach for biodegradation of organic matter in sewage treatment used a consortium of bacterial spp. that produce untreated or partially treated inorganic contaminants resulting in large amounts of poor-quality sludge. The aeration process of activated sludge treatment requires high energy. So, a sustainable technique for sewage treatment that could produce less amount of sludge and less energy demanding is required for various developed and developing countries. This led to research into using microalgae for wastewater treatment as they reduce concentrations of nutrients like inorganic nitrates and phosphates from the sewage water, hence reducing the associated chemical oxygen demand (COD). The presence of microalgae removes nutrient concentration in water resulting in reduction of chemical oxygen demand (COD) and toxic heavy metals like Al, Ni, and Cu. Their growth also offers opportunity to produce biofuels and bioproducts from algal biomass. To optimize use of microalgae, technologies like high-rate algal ponds (HRAPs) have been developed, that typically use 22% of the electricity used in Sequencing Batch Reactors for activated sludge treatment with added economic and environmental benefits like reduced comparative operation cost per cubic meter, mitigate global warming, and eutrophication potentials. The addition of suitable bacterial species may further enhance the treatment potential in the wastewater medium as the inorganic nutrients are assimilated into the algal biomass, while the organic nutrients are utilized by bacteria. Further, the mutual exchange of CO2 and O2 between the algae and the bacteria helps in enhancing the photosynthetic activity of algae and oxidation by bacteria leading to a higher overall nutrient removal efficiency. Even negative interactions between algae and bacteria mediated by various secondary metabolites (phycotoxins) have proven beneficial as it controls the algal bloom in the eutrophic water bodies. Herein, we attempt to review various opportunities and limitations of using a combination of microalgae and bacteria in wastewater treatment method toward cost effective, eco-friendly, and sustainable method of sewage treatment.

Advances in microalgal research for valorization of industrial wastewater

This review article focuses on recent updates on remediation of industrial wastewater (IWW) through microalgae cultivation. These include how adding additional supplements of nutrient to some specific IWWs lacking adequate nutrients improving the microalgae growth and remediation simultaneously. Various pretreatments strategy recently employed for IWWs treatment other than dealing with microalgae was discussed. Various nutrient-rich IWW could be utilized directly with additional dilution, supplement of nutrients and without any pretreatment. Recent advances in various approaches and new tools used for cultivation of microalgae on IWW such as two-step cultivation, pre-acclimatization, novel microalgal-bioelectrical systems, integrated catalytic intense pulse-light process, sequencing batch reactor, use of old stabilized algal-bacterial consortium, immobilized microalgae cells, microalgal bacterial membrane photobioreactor, low-intensity magnetic field, BIO_ALGAE simulation tool, etc. are discussed. In addition, biorefinery of microalgal biomass grown on IWW and its end-use applications are reviewed.

Insights into diatom microalgal farming for treatment of wastewater and pretreatment of algal cells by ultrasonication for value creation

Wastewater management and its treatment have revolutionized the industry sector into many innovative techniques. However, the cost of recycling via chemical treatment has major issues especially in economically poor sectors. On the offset, one of the most viable and economical techniques to clean wastewater is by growing microalgae in it. Since wastewater is rich in nitrates, phosphates and other trace elements, the environment is suitable for the growth of microalgae. On the other side, the cost of harvesting microalgae for its secondary metabolites is burgeoning. While simultaneously growing of microalgae in photobioreactors requires regular feeding of the nutrients and maintenance which increases the cost of operation and hence cost of its end products. The growth of microalgae in waste waters makes the process not only economical but they also manufacture more amounts of value added products. However, harvesting of these values added products is still a cumbersome task. On the offset, it has been observed that pretreating the microalgal biomass with ultrasonication allows easy oozing of the secondary metabolites like oil, proteins, carbohydrates and methane at much lower cost than that required for their extraction. Among microalgae diatoms are more robust and have immense crude oil and are rich in various value added products. However, due to their thick silica walls they do not ooze the metabolites until the mechanical force on their walls reaches certain threshold energy. In this review recycling of wastewater using microalgae and its pretreatment via ultrasonication with special reference to diatoms is critically discussed. Perspectives on circular bioeconomy and knowledge gaps for employing microalgae to recycle wastewater have been comprehensively narrated.

Integrating micro-algae into wastewater treatment: A review

Improving the ecological status of water sources is a growing focus for many developed and developing nations, in particular with reducing nitrogen and phosphorus in wastewater effluent. In recent years, mixotrophic micro-algae have received increased interest in implementing them as part of wastewater treatment. This is based on their ability to utilise organic and inorganic carbon, as well as inorganic nitrogen (N) and phosphorous (P) in wastewater for their growth, with the desired results of a reduction in the concentration of these substances in the water. The aim of this review is to provide a critical account of micro-algae as an important step in wastewater treatment for enhancing the reduction of N, P and the chemical oxygen demand (COD) in wastewater, whilst utilising a fraction of the energy demand of conventional biological treatment systems. Here, we begin with an overview of the various steps in the treatment process, followed by a review of the cellular and metabolic mechanisms that micro-algae use to reduce N, P and COD of wastewater with identification of when the process may potentially be most effective. We also describe the various abiotic and biotic factors influencing micro-algae wastewater treatment, together with a review of bioreactor configuration and design. Furthermore, a detailed overview is provided of the current state-of-the-art in the use of micro-algae in wastewater treatment.

Environmental drivers that influence microalgal species in fullscale wastewater treatment high rate algal ponds

In the last decade, studies have focused on identifying the most suitable microalgal species for coupled high rate algal pond (HRAP) wastewater treatment and resource recovery. However, one of the challenges facing outdoor HRAP systems is maintaining microalgal species dominance. By increasing our understanding of the environmental drivers of microalgal community composition within the HRAP environment, it may be possible to manipulate the system in such a way to favour the growth of desirable species. In this paper, we investigate the microalgal community composition in two full-scale HRAPs over a 23-month period. We compare wastewater treatment performance between dominant species and identify the environmental drivers that trigger change in community composition. A total of 33 microalgal species were identified over the 23-month period but species richness (the number of species present at any given time) was low and was not related to either productivity or nutrient removal efficiency. Species turnover of the dominant microalgae happened rapidly, typically <1 week. Changes in the influent NH₄-N concentration and zooplankton grazer numbers were significantly associated with species turnover, accounting for 80% of the changes in dominant species throughout the 23-month study period. Both nutrient removal and biomass production did not differ between the two HRAPs when the dominant species was the same or differed in the two ponds. These results suggest that microalgal functional groups are more important than individual species for full-scale HRAP performance. This study has increased our understanding of some of the environmental drivers of the microalgae within the HRAP environment, which may assist with improving wastewater treatment and resource recovery.