Repeated mutagenic effects of 60Co-γ irradiation coupled with high-throughput screening improves lipid accumulation in mutant strains of the microalgae Chlorella pyrenoidosa as a feedstock for bioenergy

Nuclear mutagenesis and adaptive evolution improved photoautotrophic growth of Euglena gracilis with flue-gas CO2 fixation

To effectively improve biomass growth and flue-gas CO2 fixation of microalgae, acid-tolerant Euglena gracilis was modified with cobalt-60 γ-ray irradiation and polyethylene glycol (PEG) adaptive screening to obtain the mutant strain M800. The biomass dry weight and maximum CO2 fixation rate of M800 were both 1.47 times higher than that of wild strain, which was attributed to a substantial increase in key carbon fixation enzyme RuBisCO activity and photosynthetic pigment content. The high charge separation quantum efficiency in PSII reaction center, efficient light utilization and energy regulation that favors light conversion, were the underlying drivers of efficient photosynthetic carbon fixation in M800. M800 had stronger antioxidant capacity in sufficient high-carbon environment, alleviating lipid peroxidation damage. After adding 1 mM PEG, biomass dry weight of M800 reached 2.31 g/L, which was 79.1 % higher than that of wild strain. Cell proliferation of M800 was promoted, the apoptosis and necrosis rates decreased.

Screening of microalgae species and evaluation of algal-lipid stimulation strategies for biodiesel production

Microalgae is considered an alternative source for biodiesel production producing renewable, sustainable and carbon-neutral energy. Microalgae property changes among species, which determines the efficiency of biodiesel production. Besides the lipid content evaluation, multi-principles (including high lipid productivity, high biomass yield, pollution resistance and desired fatty acid, etc.) for superior oil-producing species screening was proposed in this review and three microalgae species (Chlorella vulgaris, Scenedesmus obliquus and Mychonastes afer) with high bio-lipid producing prospect were screened out based on big data digging and analysis. The multilateral strategies for algal-lipid stimulating were also compared, among which, nutrient restriction, temperature control, heterotrophy and chemicals addition showed high potential in enhancing lipid accumulation; while electromagnetic field showed little effect. Interestingly, it was found that the lipid accumulation was more sensitive to nitrogen (N)-limitation other than phosphorus (P). Nutrient restriction, salinity stress etc. enhanced lipid accumulation by creating a stressed environment. Hence, optimum conditions (e.g. N:15-35 mg/L and P:4-16 mg/L) should be set to balance the lipid accumulation and biomass growth, and further guarantee the algal-lipid productivity. Otherwise, two-step cultivation could be applied during all the stressed stimulation. Different from lab study, effectiveness, operability and economy should be all considered for stimulation strategy selection. Nutrient restriction, temperature control and heterotrophy were highly feasible after the multidimensional evaluation.

Random Mutagenesis as a Promising Tool for Microalgal Strain Improvement towards Industrial Production

Microalgae have become a promising novel and sustainable feedstock for meeting the rising demand for food and feed. However, microalgae-based products are currently hindered by high production costs. One major reason for this is that commonly cultivated wildtype strains do not possess the robustness and productivity required for successful industrial production. Several strain improvement technologies have been developed towards creating more stress tolerant and productive strains. While classical methods of forward genetics have been extensively used to determine gene function of randomly generated mutants, reverse genetics has been explored to generate specific mutations and target phenotypes. Site-directed mutagenesis can be accomplished by employing different gene editing tools, which enable the generation of tailor-made genotypes. Nevertheless, strategies promoting the selection of randomly generated mutants avoid the introduction of foreign genetic material. In this paper, we review different microalgal strain improvement approaches and their applications, with a primary focus on random mutagenesis. Current challenges hampering strain improvement, selection, and commercialization will be discussed. The combination of these approaches with high-throughput technologies, such as fluorescence-activated cell sorting, as tools to select the most promising mutants, will also be discussed.

Rapid screening of microalgae by a 96-hole air-flowing device

In this study, a 96-hole air-flowing device (96HAFD) was established for high-throughput screening of three mutant Chlorella strains under air aeration. 96HAFD was first tested for the confirmation of homogeneous air aeration cultivation environment at 1.2 L min^-1 for algal screening based on the results of t test (p < 0.05) in the verification of consistency experiment. Then the data of dynamic growth characteristics of three mutant Chlorella strains indicated the good agreement in three screening devices including 96HAFD, flask and tube air-flowing cultivation devices by linear regression analysis between the 96HAFD and tube (R² = 0.9904), 96HAFD and flask (R² = 0.9904). At last, the 96HAFD was verified more efficient and reliable in fast screening single algal colony strains when compared with flask and tube air-flowing cultivation devices, because 96HAFD was confirmed have better performances in adaptation to the aeration cultivation circumstance and growing faster in a short period, in addition, 96HAFD had the less percentage of water loss per day (0.11%) than that of flask aeration device (2-3%) and tube aeration device (5-6.5%), which reduced negative effect caused by the water evaporation in the aeration cultivation to make the whole growing system more stable.

Improving microalgae for biotechnology - From genetics to synthetic biology - Moving forward but not there yet

Microalgae are a diverse group of photosynthetic organisms that can be exploited for the production of different compounds, ranging from crude biomass and biofuels to high value-added biochemicals and synthetic proteins. Traditionally, algal biotechnology relies on bioprospecting to identify new highly productive strains and more recently, on forward genetics to further enhance productivity. However, it has become clear that further improvements in algal productivity for biotechnology is impossible without combining traditional tools with the arising molecular genetics toolkit. We review recent advantages in developing high throughput screening methods, preparing genome-wide mutant libraries, and establishing genome editing techniques. We discuss how algae can be improved in terms of photosynthetic efficiency, biofuel and high value-added compound production. Finally, we critically evaluate developments over recent years and explore future potential in the field.

Gamma-aminobutyric acid facilitates the simultaneous production of biomass, astaxanthin and lipids in Haematococcus pluvialis under salinity and high-light stress conditions

The effects of γ-aminobutyric acid (GABA) on the biomass and astaxanthin and lipids production in Haematococcus pluvialis under combined salinity stress and high-light stresses were investigated. The results showed that the highest biomass (1.65 g L^-1), astaxanthin production (3.86 mg L^-1 d^-1) and lipids content (55.11%) in H. pluvialis LUGU were observed under the 0.25 mM GABA treatment. Moreover, compared with salinity and high-light stress, GABA treatment also increased the transcript levels of biosynthesis genes, the contents of endogenous GABA and carbohydrates but decreased reactive oxygen species (ROS) levels. Further evidence revealed that intracellular GABA could regulate cell growth, astaxanthin production and lipids synthesis by mediating carotenogenesis, lipogenesis and ROS signalling. Collectively, this study provides a combined strategy for promoting the coproduction of astaxanthin and lipids and sheds light on the regulatory mechanism through which GABA affects cell growth, astaxanthin production and lipids biosynthesis in H. pluvialis under unfavourable conditions.

Breeding of high protein Chlorella sorokiniana using protoplast fusion

To improve Chlorella's economic viability as a natural bait in aquaculture, protoplast fusion technology was used for two Chlorella mutants, H10 and Z13, selected by UV and chemical mutagenesis. Chlorella sorokiniana protoplast was prepared using the enzyme method, and then the optimal enzyme combination of 4% cellulase and 2% driselase was screened out. Z13 and H10 protoplast preparation rates reached 34.72% and 31.11%, respectively. Nine fusions with higher growth rates were selected to assess their biomass, total and soluble proteins contents. Dry cell weight, total protein, and soluble protein of fusion R7 were 0.92 g.L^-1, 67.16%, and 0.59 mg.g^-1, respectively. The biomass was 1.59, 1.43 times that of H10 and Z13; total and soluble proteins increased by 8.89%, 10.25% and 50.12%, 74.62% respectively, compared with the original algae. These results have implications for breeding excellent strains, and for large-scale and optimal application of Chlorella in aquaculture.

Using polyethylene glycol to promote Nannochloropsis oceanica growth with 15 vol% CO2

CO₂ capture with microalgae has been put forward in response to global concern on greenhouse gas emission. However, the short residence time and slow diffusion of CO₂ in water limits the growth of microalgae. In order to improve CO₂ transfer from gas phase to liquid phase and utilization by algal cells, polyethylene glycol 200 (PEG 200) was used as CO₂ absorbent to promote growth of Nannochloropsis oceanica with the bubbling of 15 vol% CO₂. Total inorganic carbon (TIC) absorbed in culture medium remained constant at 5.6 mM when 15 vol% CO₂ was bubbled continuously. PEG 200 in the medium provided additional CO₂ absorption from 0.6 to 4.8 mM when PEG 200 concentration increased from 0.5 to 4 mM. The specific growth rate of N. oceanica reached the maximum (1.41 d^-1) with 1 mM PEG 200 in culture medium, which was 21.5% higher than the specific growth rate without PEG 200. About 79% of the increase in biomass was attributed to the increased TIC with more CO₂ dissolution in culture medium because of PEG 200, and about 21% was attributed to PEG 200 itself utilized as an organic carbon source. In conclusion, PEG 200 as a CO₂ absorbent can effectively capture flue-gas CO₂ for algal growth.

Modification and improvement of microalgae strains for strengthening CO2 fixation from coal-fired flue gas in power plants

Biological CO₂ capture using microalgae is a promising new method for reducing CO₂ emission of coal-fired flue gas. The strain of microalgae used in this process plays a vital role in determining the rate of CO₂ fixation and characteristics of biomass production. High requirements are put forward for algae strains due to high CO₂ concentration and diverse pollutants in flue gas. CO₂ can directly diffuse into the cytoplasm of cells by extra- and intracellular CO₂ osmotic pressure under high CO₂ concentrations. The flue gas pollutants, such as SO_x, NO_x and fly ashes, have negative effects on the growth of microalgae. This work reviewed the state-of-the-art advances on microalgae strains used for CO₂ fixation, focusing on the modification and improvement of strains that are used for coal-fired flue gas. Methods such as genetic engineering, random mutagenesis, and adaptive evolution have the potential to facilitate photosynthesis, improve growth rate and reduce CO₂ emission.